Search Results

Search found 917 results on 37 pages for 'samsung saga'.

Page 22/37 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• LED Monitor brightness

  - by Yuval

  I am in the market for a new monitor. I've been looking around and it seems that the general brightness for monitors is between 250-320 cd/m2. After hours of searching, I narrowed it down to the LG W2453V-PF vs. the LG E2350V-SN The W2453V-PF is not LED backlit yet it has a brightness level of 310 cd/m2 and a response time of 2ms. The E2350V-SN, on the other hand, has a brightness level of 250 cd/m2 and a response time of 5ms but it is LED backlit. My questions are, looking at these overall specs: Which monitor is better? What makes LED backlight better? Is the LED backlight worth the decreased brightness level? Thanks! p.s. if you have any other comparable monitor suggestions (that are not samsung - I read their customer service is absolutely terrible), feel free to share. thanks!

  Read the article

• TEMP_PART01 and C drive

  - by SmartLemon

  So we have a Samsung series 9 laptop and it has a 128 GB solid state drive, the problem we are having with it is that it has 4 partitions, one that's 100MB (who knows what for), one thats 40 GB (Primary Windows partition), 60 GB partition (TEMP_PART01) and a microsoft office one. The primary windows partition only has less than, 30 MB left, we want to increase this space, I know that I could just move everything to temp_part01 but we are not quite sure on it. What we are thinking of doing is deleting this partition all together and extending the windows volume. The problem is that the extra partition has 55.7 remaining out of 59.7 GB, which means there is something on it, but it shows up with nothing when we go into it, when we change the settings to show hidden files, but still nothing, I then used CMD to list all the files using dir d: and still no files. So would it be safe to delete it and extend the windows volume? Or what should I do? Here's a screen shot:

  Read the article

• Windows 7 installation too slow

  - by BizApps

  I have P.C with Emaxx Motherboard : emx-a55gm-icafe with AMD dual core processor,500 GB WD Sata HDD,2GB of RAM,samsung dvdr,windows 7 dvd which is all brandnew. When i was trying to install windows 7 ulitmate on my P.C it really takes hours on setting up, which is really rare and i'm still hopeless getting a solution for this.But I don't have any issue installing windows 7 on my HP laptop that can be finished within just more than 20minutes. There is same issue that ive search in google and disabling the floppy disk drive in BIOS is their solution, but my problem is, Emaxx icafe doesnt have floppy disk drive setting on bios. I already change ACHI/IDE Support but i have still no luck. Is there any solution for this? Thanks in Regards

  Read the article

• Filter rule for SMS / text messages in exchange active sync (SMS sync)

  - by kynan

  Exchange server 2010 introduces SMS Sync (via exchange active sync), which works fine with my android device and the Samsung email app. However, all text messages are synced to my exchange inbox, which is a pain. I'd like to have them filtered to a specific folder. So far, I haven't figured out a useful filter rule for achieving that, since there seems to be no header indicating it's a text message. Has anyone managed to do that? Note that I'm not using Outlook as an email client, so I'm specifically looking for a server-side rule.

  Read the article

• UNR Installation: Partitioning Error

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm trying to install Ubuntu Netbook Remix, but when I set my partitions, I get an error. The setup I want right now is: Recovery Partition - 6 GB Windows XP Home Partition - 40 GB General Partition - remaining space UNR Partition - 40 GB I am told that I need to resize a partition and it will take a while. However, when it nearly starts, I get an ERROR!!! dialog that says, "Error informing the kernel about modifications to partition /dev/sda5 - Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 so you shouldn't mount it or use it in any way before rebooting." I'm not too sure what I should do right now... any ideas? Thanks in advance.

  Read the article

• Ubuntu dual monitor set up - taskbars appear on other monitor

  - by DisgruntledGoat

  I'm trying to get my TV (connected via HDMI cable) to act as a second monitor to watch video etc. The TV is to my left, so in Display Preferences I unticked "Mirror Screens" and put the monitors like this: -------- ---------- | PC | | TV | | | ---------- -------- When I do this, the PC monitor comes up with just the desktop wallpaper and the interface - taskbar and windows, etc - moves to the TV screen. But if I swap the monitors around, the taskbars are still on the TV screen, with the windows (and desktop icons) on the PC screen. Is there a way to set the computer monitor as the main one and the TV as the second screen? PC: Dell Inspiron 531 Monitor: Samsung SyncMaster 720N TV: Philips 26PFL5522D LCD TV

  Read the article

• Event Viewer: atapi errors

  - by Wesley

  Specs for Samsung N120 Netbook Atom N270 @ 1.60 GHz / 160 GB IDE HDD / 2 GB PC2-5300 DDR2 RAM / Windows XP Home SP3 So I'm still getting some atapi errors in my Event Viewer. Here are two atapi errors I am getting over and over again: (1) The device, \Device\Ide\IdePort0, did not respond within the timeout period. (2) The driver detected a controller error on \Device\Ide\IdePort0. In addition, I am repeatedly getting this warning as well: (1) An error was detected on device \Device\Harddisk0\D during a paging operation. I just got this back from repair, where before, I couldn't boot at all because I was led to a black screen saying "Operating System Not Found". Still, I got it back and it can boot again, without any hard drive replacement or data loss. So, how can I get rid of these errors and warnings? What could have happened during repairs to allow my netbook to boot again? Thanks in advance.

  Read the article

• Samsumg WEP470 bluetooth headset won't work in Windows 7

  - by rob

  I'm trying to use my Samsung WEP470 bluetooth headset with Windows 7 for VOIP apps. When I try to "Add a Bluetooth Device" in the control panel, it detects the headset and installs a driver. However, at the end of driver installation, I see the error message, "This device cannot start. (Code 10)" I'm using the Microsoft Bluetooth transceiver that came with my Microsoft IntelliMouse Explorer for Bluetooth, and the mouse works fine. From other Superuser.com posts, it looks like the headset should just work, as long as I have the Bluetooth transceiver's drivers properly installed. Any ideas what I'm doing wrong?

  Read the article

• Windows 7 64 Bit Can't Get Past Format

  - by Soren

  favorite Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

  Read the article

• How safe is it to run CHKDSK on an SSD?

  - by Eilon

  I recently saw Windows 7 pop up a warning or two that I should run chkdsk on my laptop. My laptop came with an SSD and I'm not sure if there are any negative implications to running chkdsk on such a drive. Are there any potential issues with reporting "bad sectors" on the drive? I would imagine that the physical concept of sectors is completely different between a platter and a microchip. I don't think my SSD supports TRIM. It's about 14 months old and a quick web search seems to hint that it doesn't (though it's nearly impossible to find out this info for sure!). I'm also not sure if TRIM is even relevant here since there shouldn't be much in the way of deletes. So, how safe is it to run chkdsk on my SSD drive? The model of SSD that I have is reported as "Samsung SSD PB22-JS3 2.5".

  Read the article

• Intel Core i5-2467m - Turbo Boost not activating?

  - by Trevor Sullivan

  I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

  Read the article

• Windows 7 Can't Get Past Format

  - by Soren

  Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

  Read the article

• Windows 7 Boot Screen Resolution/Aspect Ratio

  - by Joe

  I have been using my Windows 7 PC with my 46" Samsung HDTV with 1920x1080 resolution. The boot screen seems to always be at 1024x768 resolution and the aspect ratio doesn't match the 1080p ratio. I read on a msdn blog that microsoft only made the boot screen in one type of resolution so that cannot be changed. The result is that on my TV the boot screen seems to look stretched out. Is there a way to make change the aspect ratio or crop it in someway? Is there any method at all to make it look normal or just better without being stretchy looking?

  Read the article

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• How can ShadowProtect SBS backup to alternating external drives?

  - by detly

  I am trying to configure ShadowProtect SBS (v. 4.1.5.10129) in Windows Server 2003 SBS to backup my server hard drives to two alternating external drives. What I want is to be able to swap one drive for another every Friday, and have ShadowProtect continue on the same schedule. Ideally, this would require absolutely no user interaction whatsoever, apart from physically unplugging one drive and reconnecting the other. The trouble is, Windows Server 2003 does not allow you to assign the same drive letter to two different devices. So if I plug in drive #1 and assign it drive letter "X:", the next week when I unplug it and plug in drive #2, it gets some other letter. But since ShadowProtect is set to backup to "X:\", it can't find it and the backup fails. The drives are Samsung STORY Station 3.0 2TB drives. How can I configure things so I can just swap the drives over every week and not worry about having to reconfigure drive letters every time?

  Read the article

• Several "SideBySide" errors in the event viewer (Windows XP SP3)

  - by Wesley

  Hi all, For some reason, my netbook continuously comes up with SideBySide errors in the event viewer under Computer Management. Is there some way to get rid of these errors? My netbook occasionally BSODs and looking back into the event viewer after, at least 8 SideBySide errors were logged prior to BSOD. Please help! Thanks in advance. Netbook is a Samsung N120 with upgraded RAM to 2 GB. EDIT: So, SideBySide errors have been resolved and apparently the BSOD isn't related. But I remember specifically, that last time I had a BSOD, it was due to an "unknown hard error." What causes that?

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Disable SMS Syncing on Outlook

  - by Bruno Brant

  I've paired up my Samsung phone with an Outlook Exchange inbox (probably Outlook 2010), and now I've got the outstanding SMS syncing feature. Only, of course, it sucks, since my inbox get's flooded with SMS's that I already have on my phone. After looking around the internet for quite a while for a option that would allow me to disable that kind of syncing, the only guide I got was designed for Windows Phone 6.x. I want desperately to disable it. Anyone has any clue of how? I can't really believe that MS has forgotten to include the option. I've already looked at this question (Filter rule for SMS / text messages in exchange active sync (SMS sync)), and while it might help me, that's not what I'm looking for.

  Read the article

• Glitch with updated nvidia drivers for Dual Monitor

  - by Shinhan

  Same problem already happened once so I rolled back to the latest non-problematic version, but it's been months now and I thought to try gain. Still the same problem, so now I thought to ask for help rather than rollback to this, now very old, version. Currently I use 266.58 version drivers for Windows 7 x64 and GeForce GTX 275. (Downloaded from the nvidia website) I have two monitors, Samsung SyncMaster 223BW (LCD) is primary and LG F900B (CRT, old but still works) is secondary. The problem: when I turn off the monitors (both or just secondary) all of the windows that were on the secondary monitor get moved to the primary. This also occurs when I use Sleep. Again, in the old drivers this didnt happen, but now it does and is very annoying, requiring me to manually move the windows back to the secondary monitor (which I use for most of the windows). I had no luck searching for this on google, but maybe somebody here will have a useful suggestion.

  Read the article

• please explain my fio results - is O_SYNC|O_DIRECT misbehaving on linux?

  - by Zoltan

  I'm going mad over figuring out what the problem could be with one of our storage boxes. With a simple fio script I'm testing random writes using bs=1M and direct=1. The SSD is a Samsung 840pro attached to an LSI HBA (3Gbit/s ports). This is the result I'm getting under FreeBSD 9.1: WRITE: io=13169MB, aggrb=224743KB/s, minb=224743KB/s, maxb=224743KB/s, mint=60002msec, maxt=60002msec This is regardless of sync being set to 0 or 1. On linux, this is the result with sync=0: WRITE: io=14828MB, aggrb=253060KB/s, minb=253060KB/s, maxb=253060KB/s, mint=60001msec, maxt=60001msec and with sync=1: WRITE: io=6360.0MB, aggrb=108542KB/s, minb=108542KB/s, maxb=108542KB/s, mint=60001msec, maxt=60001msec My understanding is that since I'm operating on the raw block device, O_SYNC should not make any difference - there's no filesystem, any barrier, anything between the writes and the drive itself. Especially with O_DIRECT|O_SYNC set. Any ideas? For reference, here's the fio script I'm testing with: [global] bs=1M ioengine=sync iodepth=4 size=16g direct=1 runtime=60 filename=/dev/sdh sync=1 [rand-write] rw=randwrite stonewall

  Read the article

• Windows 8.1 clean install keeps failing with Oxc0000005 error

  - by joaocandre

  I'm encountering the error Oxc0000005 when making a clean install of Windows 8.1 x64 on a Samsung 840 SSD. I don't know where the error is coming from, I'v already tested several solutions/workarounds I found online and nothing seems to work. The SSD is healthy, I can install Linux (Ubuntu) on it, but apparently the Windows install reports the drive as "locked" when trying to "refresh" the install. According to diskpart, however, the SSD is not in read-only mode, so I don't understand what is going on. I had Windows 8 installed before formatting the drive.

  Read the article

• Can't start the Windows Phone Emulator

  - by Louis

  When I try run/debug an app in the emulator I get this error: And in Visual Studio's Error List console it simply says: 0x80131500 I haven't worked on this project for about a week, but it was working then. I checked the BIOS and everything is enabled (as it was last week). I don't think this is related, but yesterday, I did upgrade my system SSD and used the Samsung Data Migration Tool to clone my drive. I've tried repairing the Windows Phone SDK 8.0, but that didn't help. Are there any other things I can try? I really don't think it's related to the SSD. Hyper-V related services: I can't start any of these either.

  Read the article

• Sharp flat panel scaling with Nvidia drivers

  - by Brecht Machiels

  I have a Samsung 226BW flat panel with a 1680x1050 native resolution. As my PC is rather dated (Athlon XP 2600+ and GeForce 6600 GT), I need to run more recent games (but still old) on a lower resolution. Unfortunately, scaling low resolutions to 1680x1050 results in a very blurry image (bilinear scaling). I have created a custom resolution of 840x525 in the Nvidia control panel. Technically, this resolutions allows perfect upscaling to 1680x1050 without the need for bilinear interpolation. Unfortunately, the Nvidia driver always seems to do bilinear scaling, again resulting in a blurry image. However, I seem to remember that I did obtain crisp images using this resolution in the past (before a Windows re-install). Maybe only some driver versions support integer upscaling without bilinear filtering? Or perhaps there are other solutions?

  Read the article

• PDF booklet printing

  - by Diego

  I have a Samsung ML-2851nd printer (laser, duplex) When printing booklets from PDF files, what is best? Printing with "standard" Page Scaling from Reader, and selecting Booklet printing from the Printer Properties Using the Booklet Printing option from Reader, and only selecting "Print on Both Sides" in the Printer Properties. If I go with the first option, can I use Page Scaling "None" to get bigger text or will it cause any problems? (Fit to printable area shrinks to 93%, I'm using A4 paper) If I go with the second one, what's the correct setting: "Flip on Long Edge" or "Flip on Short Edge"? Thanks!

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >