Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 22/481 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • USB 3 port fails to enable my keyboard during boot

    - by Jay
    My laptop has both USB 2.0 and 3.0 ports. I've connected: mouse -- USB 2.0 port keyboard -- USB 3.0 port On starting the system, the mouse is active however the keyboard does not function. Everytime i have to disconnect the keyboard and plug it back in and only then it becomes active. Is there any fix to this problem or is the USB port itself faulty? specs: Dell XPS, 64-bit i7 processor with 8G of RAM

    Read the article

  • usb flash drives how to fix ?

    - by madyotto
    Hi all I have recently purchased some so called 256gb Kingston drives that are fake I used a program called check flash and few other to check for dead sectors and read speed and read and write speed the results are as follows: they were reading at 1.35 mbps at best they read and wrote at 0.95 mbps and had a hell of a lot of dead sectors so what I ask is: Is there a way to drop the size to improve speed Is there any other way to improve speed How can I stop the device from addressing the dead sectors Any help will be much appreciated ALL THE THANKS (MADYOTTO)

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

  • Can I do an install onto a 4GB usb stick which is smaller than the recommended installation size?

    - by Radek
    I've read through this question: How do I install Ubuntu to a USB key? So I am aware how to install Ubuntu onto a USB stick. I'm also aware that the minimum recommended HDD requirement for ubuntu is 5GB. my question is specifically, can I squeeze the install of Ubuntu 11.10 onto a 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

    Read the article

  • How to make Logitech Anywhere MX work in Ubuntu 12.X?

    - by alfC
    I have a Logitech Anywhere MX mouse (wireless), when I connect it to the computer it doesn't work. The mouse works in other computers with Windows and with Fedora 17, but it doesn't work in two different computers with Ubuntu 12.04 and 12.10. Moreover these same computers work with another Microsoft wireless mouse. So I think the combination of Logitech MX and Ubuntu doesn't play well. The dmesg log entry looks like this: [ 578.845838] usb 3-2: Product: USB Receiver [ 578.845841] usb 3-2: Manufacturer: Logitech [ 578.851625] logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 578.851899] logitech-djreceiver 0003:046D:C52B.0009: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 578.854518] logitech-djreceiver: probe of 0003:046D:C52B.0009 failed with error -32 Instead of the expected (taken from Fedora): [154344.634520] usb 2-1.2: Manufacturer: Logitech [154344.647935] logitech-djreceiver 0003:046D:C52B.000D: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2 [154344.653788] input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.000D/input/input21 [154344.654192] logitech-djdevice 0003:046D:C52B.000E: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.2:1

    Read the article

  • Internal drives vs USB-3 with external SSD or eSata with External SSD

    - by normstorm
    I have a need to carry VMWare Virtual Machines with me for work. These are very large files (each VM is 20GB or more) and I carry around about 40 to 50 VM's to simulate different software configurations for different client needs. Key: they won't fit on the internal hard drive of my current laptop. I currently execute the VM's from an external 7200RPM 2.5" USB-2 drive. I keep copies of the VM's on other 5400 external USB-2 drives. The VM's work from this drive, but they are slow, costing me much time and frustration. It can take upwards of 30 minutes just to make a copy of one of the VM's. They can take upwards of 10-15 minutes to fully launch and then they operate sluggishly. I am buying a new laptop (Core I7, 8GB RAM and other high-end specs). I intend to buy an SSD for the O/S volume (C:). This SSD will not be large enough to hold the VM's. I have always wanted a second internal hard drive to operate the VM's. To have two hard drives, though, I am finding that I will have to go to a 17" laptop which would be bulky/heavy. I am instead considering purchasing a 15" laptop with either an eSATA port or USB-3 ports and then purchasing two external drives. One of the drives might be an external SSD (maybe OCX brand) for operating the VM's and the other a 7400RPM 1TB hard drive for carrying around the VM's not currently in use. The question is which options would give me the biggest bang for the buck and the weight: 1) 2nd Internal SSD hard drive. This would mean buying a 17" laptop with two drive "bays". The first bay would hold an SSD drive for the C: drive. I would leave the first bay empty from the manufacture and then purchase/install an aftermarket SSD drive. This second SSD drive would have to be very large (256 GB), which would be expensive. I would still also need another external hard drive for carrying around the VM's not in use. 2) 2nd internal hard drive - 7400 RPM. Again, a 17" laptop would be required, but there are models available with on SSD drive for the C: drive and a second 7200 RPM hard drives. The second drive could probably be large enough to hold the VM's in use as well as those not in use. But would it be fast enough to drive the VM's? 3) USB-3 with External SSD. I could buy a 15" laptop with an SSD drive for the C: drive and a second hard drive for general files. I would operate the VM's from an external USB-3 SSD drive and have a third USB-3 external 7200 RPM drive for holding the VM's not in use. 4) eSATA with External SSD. Ditto, just eSATA instead of USB-3 5) USB-3 with External 7400 RPM drive. Ditto, but the drive running the VM's would be USB-3 attached 7400 RPM drives rather than SSD. 6) eSATA with External 7400 RPM drive. Dittor, but the drive running the VM's would be eSATA attached 7400 RPM drives rather than SSD. Any thoughts on this and any creative solutions?

    Read the article

  • Processor not running at max speed

    - by Andrew Hampton
    My laptop has an Intel Core 2 Duo T9300 which should be running at 2.5GHz, however CPU-Z consistently reports my Core speed at right under 1.6Ghz (8x multiplier and ~200MHz Bus Speed). Even when I'm doing heavy development work and the processor is running at 100% for extended periods of time the core speed reported by CPU-Z never goes up to 2.5GHz. My understanding is that this reduction in speed is to save power, but this happens even when I'm plugged into the outlet. Does anyone know why this is happening or how to fix it?

    Read the article

  • Signal strength and Speed of wireless network

    - by Tim
    As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

    Read the article

  • Signal strength and Speed of wireless network

    - by Tim
    As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

    Read the article

  • USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

    - by Mike
    The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

    Read the article

  • Map /dev/bus/usb node to /sys node on Linux

    - by Cody Brocious
    I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

    Read the article

  • Booting from a USB drive that was originally a boot drive

    - by daveh551
    When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

  • Adding a new USB port inside a Macbook Pro

    - by MikeC8
    I have a USB Dongle that I'd like to put inside my Macbook Pro. I have already found a spot that will fit the dongle. The next question is splicing one of the USB ports and connecting it to the dongle. Here's a photograph of the inside of my Macbook Pro, showing the USB ports and a little gray plastic divider with four holes in it above each port. http://min.us/mvoQEem My question: Does anyone know what is inside these holes? Presumably each one is a pin for the USB port, right? Can I just stick a wire in there, giving me 4 pins, plus the fifth attached to the metal outside the port? More generally, any one have any ideas for what might be the easiest way to get a USB port inside my MBP? :) Thanks!

    Read the article

  • USB keyboard not recognized by motherboard with only a legacy PS/2 header

    - by Luis
    I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

    Read the article

  • Syncing Large Directories/Filesystems using USB Drive [closed]

    - by Alan Lue
    Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

    Read the article

  • USB hardwares driver installation

    - by unknown (google)
    I am using few USB hardwares like camera and scanners with my software application. I plugged my hardware in USB A installed the drivers and the device was working properly. Now I tried to connect the same hardware in USB B (ie, some other USB port), and again it is asking for the driver installation. I need to know the reason behind this. Is it something to do with the particular device or system? Anywork around for this during the first time driver installation? Please anyone explain me how the USB works physical address, how it is assigned and how the driver for a device getting installed. Thanks in advance.

    Read the article

  • Syncing Large Directories/Filesystems using USB Drive

    - by Alan Lue
    Does anyone have a solution for syncing large directories/filesystems using just a USB flash drive (and specifically without using a network connection)? The objective is simply to sync a user directory between two computers. The contents of the user directory could amount to a large quantity of data—say, a quantity larger than could be stored on any single USB drive—but the aggregate size of changes that must be propagated by a single sync could easily fit on a USB drive. As an example, suppose a user directory is already synchronized between a desktop and a laptop computer. Here's a use case: Some changes are made in the user directory on the desktop. We mount a USB drive onto the desktop and copy whatever changes need to be applied to the laptop user directory in order to synchronize the desktop and laptop user directories. We now mount the USB drive onto the laptop and apply the changes. The desktop and laptop user directories are now synchronized. Any ideas? Alan

    Read the article

  • I found two usb sticks on the ground. Now what?

    - by Stefano Borini
    As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

    Read the article

  • Strange performance differences in read/write from/to USB flash drive

    - by Mario De Schaepmeester
    When copying files from my 8GB USB 2.0 flash drive with Windows 7 to a traditional hard drive, the average speed is between 25 and 30 MB/s. When doing the reverse, copying to the USB drive, the speed is 5MB/s average. I have tested this with about 4.5GB of files, a mixture of smaller and larger ones. The observations were the same on both FAT32 and exFAT file systems on the USB drive, NTFS on the internal hard disk. I don't think I can be mistaken in saying that flash memory has a lot higher performance than a spinning hard drive in both terms of reading and writing. For both memory types, reading should be faster than writing too. Now I wonder, how can it be that copying files from a fast read memory to a faster write memory is actually slower than copying files from a fast read memory to a slow write memory? I think that the files are stored in RAM before being copied over too, and there's caching as well, but I don't see how even that could tip the balance. It can only be in the advantage of writing to the USB drive, since it is "closer" to the SATA system than the USB port and it will receive data from the internal SATA HDD faster. Perhaps my way of thinking is all wrong or it just depends on the manufacturer of the USB pen. But I am curious.

    Read the article

  • Copying large files from USB devices to the internal hard drive fails on Mac OS

    - by John M. P. Knox
    I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

    Read the article

  • Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

    - by geerlingguy
    I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

    Read the article

  • External USB HD with -optional- mains?

    - by Stephen
    Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

    Read the article

  • Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

    - by ben
    I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >