Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 20/481 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Remove encryption from USB flash drive

  - by Timic

  It all started when I was attempting to format my PNY USB drive because it was full of junk. When it asked me what type of file system, I selected FAT but there was a checkbox below that said "Encrypt" and I accidently checked it and continue. I had no choice but to come up with a passphrase for it, and so I did, thinking I was able to remove that encryption. But after that at Disk Utility I thought I would find a "Remove Encryption" button or something like that but I didn't. I tried formatting it to remove the encryption but it gives me an error: Error Formatting, The device is busy" Detail>>> One or more block devices are holding /dev/sdb/. I am stuck, what should I do?

  Read the article

• Ubuntu 12.10 live-usb won't boot

  - by user109175

  I own an Aleutia "Tango" low power PC. It uses a Intel Atom CPU N2800 @1.86GHz processor. I know there are Linux issues with the "Cedar Trail" graphics on this hardware but I can happily run Ubuntu 12.04 using the VESA graphics driver. I wanted to try out Ubuntu 12.10 so I created a live USB under 12.04 but I am unable to get this to boot. It gets as far as the Grub screen but after that the monitor shuts down. I have tried the F6 "nomodeset" option but that doesn't make any difference. Does anyone have any knowledge of this problem? Thanks in advance.

  Read the article

• Delete U3 System from SanDisk Cruzer USB Drive [closed]

  - by Petriborg

  Possible Duplicate: How do I get rid of “U3 System” on my USB drive? SanDisk Cruzer come with a "U3" malware built into them. Its intended for windows, but on Ubuntu it shows up as a "U3 System" CD on the desktop and as /dev/scd1 -> sr1 My question - How do I permanently delete this from the device without windows? I'm aware of the windows program, but I don't have access to any, and in any event, I wouldn't want to insert the stick into a windows box because it automatically installs its malware to any windows box comes into contact with! A friend of mine realized you could delete the cdrom via sudo echo "1" > /sys/class/block/srXXX/device/delete But it will come back if you reboot.

  Read the article

• Automatically sync a folder to a USB when USB is plugged in?

  - by John

  Is there a way to sync a folder to an USB drive when the drive is plugged in? I'd like it to sync, or copy over changes, both ways. I've seen the Back In Time and Unison-GTK applications, but I'd like for it to run as soon as the drive is mounted. What I mean is, unintrusively sync the two folders without any input from myself besides setting it up. If this isn't possible, is it possible to run the application when the thumb drive is plugged in to remind myself to sync manually? Thanks!

  Read the article

• Cannot mount USB disks due to "not authorized" error

  - by shadovv

  I have Ubuntu 12.04 (.2?) installed. I don't plan to need GUI after setup so I modified the grub to start in console. However, whenever I want to start up GUI I need to type startx. Simple/basic stuff. However I seem to be hitting a snag: I am having trouble mounting/accessing USB flash drives in the GUI I started in the console. "Unable to mount location - not authorized". Seemed like it should be an easy fix, but can't figure out how I'm overlooking it. Can someone help me out?

  Read the article

• Ubuntu 12.04 USB wireless not recognized

  - by Justin

  I have searched for awhile now for ways to fix my problem but have come up with nothing. I am running Ubuntu 12.04 on my desktop computer. I am unable to find the Enable Wireless button in the network area. It just doesn't appear. Everything else works on my laptop. I believe it's the drivers for my USB network adapter. I also have no way of using a wired connection at the moment. Thanks for any help!

  Read the article

• Need help to install persistent Ubuntu on USB drive

  - by Junior

  I am a new user of Ubuntu. I would like to install a persistent Ubuntu 11.04 to my USB stick, and it should be able to work as a guest OS running on Windows so that I can boot it on other computers other than the one which I used for the installation. I have used several creators such as unetbootin, however from my understanding it can only create Live Linux which I am unable to save my configurations and files. If it's possible I would like to bypass the BIOS, that is to say that I can just load from the virtual machine without having to restart the computer. Thanks in advance!

  Read the article

• Start script when connecting phone through usb

  - by choel

  Trying to run a script when my phone is plugged in via USB, a made a udev rule looks like this in /etc/udev/rules.d/85-lazydroid.rule ATTRS{idVendor}=="22b8", ATTRS{idProduct}=="428c", RUN+="/home/joel/.lazydroid" And the script .lazydroid looks like this: #!/bin/bash exec adb forward tcp:8080 tcp:8080 & exec chromium-browser 127.0.0.1:8080 --new-window & The script itself runs fine. The trick is I can't get the script to run up on insertion of the phone. And it's the right ID according to: lsusb | grep Motorola Bus 002 Device 042: ID 22b8:428c Motorola PCS Any ideas?

  Read the article

• Unable to record from USB sound card line-in connector

  - by tete

  I've been googling and struggling with this for a while but haven't been able to make this work. I bought a USB sound card (Encore ENMAB 8-CM) to record from its line-in connector. I'm not sure which input to pick in Audicity, but I'me sure I've tested them all. These are all the available inputs I have in Audacity. But there's no sound being recorded at all. I've already checked the device is working, so I really don't know if I'm doing something wrong. Any help will be very appreciated. Cheers.

  Read the article

• Ubuntu 12.04 USB (HP)

  - by xShadoWolf

  I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

  Read the article

• USB modem dosn't working in Ubuntu

  - by skeeph

  In Ubuntu 12.10 USB-modem Huawei 171 from MTS is not connected to the network. First on the message "Are you registered on the network", immediately after that, "You are disconnected from the network." This happened after there was an internal error notification Ubuntu. I did not pay attention, and closed by sending the report. After the reboot does not work. Settings are not changed. I am online with this modem in Windows 8. Could you tell me why it is not working,please thank you in advance P.S Sorry for my English. It's foreign language for me. Please mention to me where are my mistakes. Thanks

  Read the article

• Encrypted usb stick not booting anymore how can I resolve the Disaster

  - by statquant

  Guys I am experiencing massive problem here. I created a bootable usb stick that I "full disk" encrypted with Ubuntu 13.04. I was using it when it froze. I had to reboot it manually and now I cannot boot on it anymore (It is not listed in the boot menu anymore) If I put when I run Ubuntu on my laptop ubuntu can see it and I am asked for a password But the correct password does not seem to work (I assume that this passphrase is the one I was using previously at startup) Can you please help me figure this thing out, this is massive problem to me...

  Read the article

• USB Port not working for Ubuntu 14.04 LTS

  - by user292125

  I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

  Read the article

• usb stop working

  - by miguel

  I'm using Xubuntu 12.04 on a 64 bit Intel core duo laptop and the 3 USB 3.0 ports stopped working if I do not use the mouse. I updated the kernel to 3.9 but the bug persists. I googled too much and the few reponses I got cannot fixed this. The only solution is shuting down, unplugging and then plugging them back, then all works fine. But after half an hour or two days the bug reappears. How can I solve this? Thanks and excuse my poor english.

  Read the article

• How to get rid of auto-generated sequence number in network's device name in Windows?

  - by Piotr Dobrogost

  Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• If using a bootable Ubuntu USB drive, can I use the internal hard drive as a temporary download and

  - by NoCatharsis

  I am new to Linux, so this is probably a basic problem... My flash drive is only 4GB in size and that is not enough to hold kernel and other package updates, even if only temporary. I am actually using Kubuntu, but I don't think this would change the nature of the question...? I would just like to be able to set my download directory to the internal drive to download the upgrades, then replace the old versions installed on the USB. Of course I have no use for keeping the older versions, so would I also have to manually remove those after upgrading?

  Read the article

• Is there a Generic USB TouchScreen Driver 12.04?

  - by lbjoum

  Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• Trouble installing Ubuntu 12.04 from USB

  - by Kyle J

  I want to dual-boot Ubuntu Desktop 12.04 on my new ultrabook which has an Intel i7 3517U processor 6GB RAM Windows 7, 64-bit no CD/DVD drive I created my bootable USB stick using pendrivelinux.com with the "ubuntu-12.04.1-desktop-i386.iso". I am following these directions because they include nice screenshots; however, I do not get very far in the process. I am able to boot into the Live Desktop, and then I try to install onto my hard disk. Here are the series of actions that I take next: First, I see this ( http://i.imgur.com/vucYH ) window, and click 'continue' Then I get this ( http://imgur.com/2wESc ) window, and click 'continue' again This appears: and I get worried because it seems like there is no recognition that I have Windows installed. According to the directions I am following, I should see /dev/sda1 and /dev/sda2 partitions. In the drop-down menu at the bottom the only "Device for boot loader installation" is /dev/sdb and no information is shown. I am hesitant to click 'Install Now' for fear of what it might do to Windows. 4. I click 'Quit' and cancel the installation, but then about 5 seconds later this ( http://imgur.com/a/yXi0C ) window pops up (I have expanded it to full screen to scroll and show all the details). 5. Another second later this ( http://imgur.com/vxcrN ) comes up. I'm not sure how relevant this is. Does anyone have any insight into this issue?? Why does it not show my current Windows partition? What would happen if I tried to continue with the installation process? Thanks! PS - sorry, it would only let me post 2 hyperlinks as a new user

  Read the article

• unable to access usb device.

  - by Tom

  Hi everyone, I'm reading my boot logs, at /var/log trying to understand why the boot process is taking so long. I found that the system can't access many usb devices, but can't understand why. Is there a way to stop Ubuntu from trying to access them? Here are the lines: /var/log# grep -r "usb_id" . ./boot.log:usb_id[716]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/mouse1' ./boot.log:usb_id[721]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./boot.log:usb_id[725]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' Any help will be greatly appreciated. Thanks in advance.

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• 1.5 TB USB Drive failed to mount

  - by user89348

  Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >