Search Results

Search found 28288 results on 1132 pages for 'home directory'.

Page 220/1132 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • Battery not recognized on my laptop (and it recognizes my laptop as a desktop)

    - by AZorin
    I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried to get the output of cat /proc/acpi/battery/BAT1/state but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root Nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find. Is there any way to change the configuration file(s) that detect the internal hardware of the computer. The /proc directory is a temporary RAM directory afaik. Is there a directory where that data is stored permanently and where the RAM reads if you know what I mean? Thanks in advance. AZorin This issue has been reported as bug #764513.

    Read the article

  • PHP include_path doesn't work

    - by 50ndr33
    I have the documents at http://www.example.com/ in /home/www/example.com/www running on Debian Squeeze. /home/www/example.com/ www/ index.php php/ include_me.php In the php.ini I've uncommented and changed to: include_path =".:/home/www/example.com" In a script index.php in www, I have require_once("/php/include_me.php"). The output I am getting from PHP is: Warning: require_once(/php/include_me.php) [function.require-once]: failed to open stream: No such file or directory in /home/www/example.com/www/index.php on line 2 Fatal error: require_once() [function.require]: Failed opening required '/php/include_me.php' (include_path='.:/home/www/example.com') in /home/www/example.com/www/index.php on line 2 As you can see, the include-path is set correctly according to the error. But if I do require_once("../php/include_me.php");, it works. Therefore, something has to be wrong with the include-path. Does anyone know what I can do to fix it?

    Read the article

  • RewriteRule applying pattern even though 1 of the RewriteCond's failed

    - by BHare
    #www. domain . tld RewriteCond %{HTTP_HOST} (?:.*\.)?([^.]+)\.(?:[^.]+)$ RewriteCond /home/%1/ -d RewriteRule ^(.+) %{HTTP_HOST}$1 RewriteRule (?:.*\.)?([^.]+)\.(?:[^.]+)/media/(.*)$ /home/$1/client/media/$2 [L] RewriteRule (?:.*\.)?([^.]+)\.(?:[^.]+)/(.*)$ /home/$1/www/$2 [L] Here is rewritelog output: #(4) RewriteCond: input='tfnoo.mydomain.org' pattern='(?:.*\.)?([^.]+)\.(?:[^.]+)$' [NC] => matched #(4) RewriteCond: input='/home/mydomain/' pattern='-d' => not-matched #(3) applying pattern '(?:.*\.)?([^.]+)\.(?:[^.]+)/media/(.*)$' to uri 'http://www.mydomain.org/files/images/logo.png' #(3) applying pattern '(?:.*\.)?([^.]+)\.(?:[^.]+)/(.*)$' to uri 'http://www.mydomain.org/files/images/logo.png' #(2) rewrite 'http://www.mydomain.org/files/images/logo.png' -> '/home/mydomain/www/logo.png' If you note on the 2nd 4 it failed the -d (if directory exists) pattern. Which is correct. mydomain does not have a /home/. Therefore it should never rewrite, atleast according to my understanding that all rewriterules are subject to rewriteconds as logical ANDs.

    Read the article

  • OS X Login Authentication Against Leopard Server

    - by mattdwen
    I am doing a few tests with OS X Server before I have to do a deploy in a few months. I have configured Open Directory, and created a few users. I've configured Directory Utility on a 10.5 client, but the login authentication doesn't work the way I would expect. I would expect I could user a username/password from any user created in Open Directory and be able to log into the client. Instead, it appears I need to create a local user, which you then sync with a directory user using Directory Utility. Alternatively, if I add an Active Directory config to the client, I can use any AD user, as I would expect. Am I hoping for the impossible, or is something likely wrong with the configuration?

    Read the article

  • How do I know if I'm getting the most out of my video card?

    - by b.long
    My computer at home is a bit lacking, so I want to make sure I'm getting the most out of it while I can. Generally speaking, here are the specs: 4GB Memory AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ × 2 64-bit Ubuntu The terminal shows me the following: me@home:~$ uname -a Linux home 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux me@home:~$ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] me@home:~$ sudo lshw -C video *-display:0 description: VGA compatible controller product: RV380 [Radeon X600 (PCIE)] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:e0000000-efffffff ioport:ac00(size=256) memory:fdef0000-fdefffff memory:fdec0000-fdedffff *-display:1 UNCLAIMED description: Display controller product: RV380 [Radeon X600] vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress bus_master cap_list configuration: latency=0 resources: memory:fdee0000-fdeeffff me@home:~$ lspci -nn | grep VGA 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] [1002:5b62] The additional drivers menu in System Settings shows me nothing useful and my attempt at installing ATI's Catalyst Control center (drivers that came with the video card) failed. I believe the latest version of Ubuntu at the time was 9.x. What should I do? Install an old version of Ubuntu 9? Use some alternative driver? UPDATE: I might try my hand at a bit from this answer next: "Installing Catalyst Manually (from AMD/ATI's site)" . From a terminal, fgl_glxgears returns *"fgl_glxgears: command not found"*. Any thoughts?

    Read the article

  • Quickly ubuntu-application + indicator template don't work

    - by aliasbody
    I've started to work with quickly and python (because I wanted to have some GTk3 integration and create and appindicator), and so I create the projecto like this : quickly create ubuntu-application ualarm cd ualarm quickly run And the application launched. But then I tried to add the appindicator like this : quickly add indicator And since then the application doesn't start anymore and this error appear : aliasbody@BodyUbuntu-PC:~/Projectos/ualarm$ quickly run (ualarm:8515): Gtk-WARNING **: Theme parsing error: gnome-panel.css:28:11: Not using units is deprecated. Assuming 'px'. /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) Traceback (most recent call last): File "bin/ualarm", line 33, in <module> ualarm.main() File "/home/aliasbody/Projectos/ualarm/ualarm/__init__.py", line 33, in main window = UalarmWindow.UalarmWindow() File "/home/aliasbody/Projectos/ualarm/ualarm_lib/Window.py", line 35, in __new__ new_object.finish_initializing(builder) File "/home/aliasbody/Projectos/ualarm/ualarm/UalarmWindow.py", line 24, in finish_initializing super(UalarmWindow, self).finish_initializing(builder) File "/home/aliasbody/Projectos/ualarm/ualarm_lib/Window.py", line 75, in finish_initializing self.indicator = indicator.new_application_indicator(self) File "/home/aliasbody/Projectos/ualarm/ualarm/indicator.py", line 52, in new_application_indicator ind = Indicator(window) File "/home/aliasbody/Projectos/ualarm/ualarm/indicator.py", line 20, in __init__ self.indicator = AppIndicator3.Indicator('ualarm', '', AppIndicator3.IndicatorCategory.APPLICATION_STATUS) TypeError: GObject.__init__() takes exactly 0 arguments (3 given) How can I solve this problem ?

    Read the article

  • installing SQLite3 gem on remote FreeBSD server using RVM - root permissions needed?

    - by atmosx
    I am trying to install ruby SQLite3 gem, on a remote freebsd server. I'm using RVM which in theory does not need 'root permission' to compile gems but I get a root error, here: [user ~]$ gem install sqlite3 -- --with-sqlite3-dir=/home/www/atma/opt/ [...] make install /usr/bin/install -c -o root -g wheel -m 0755 sqlite3_native.so /home/www/atma/.gems/gems/sqlite3-1.3.6/lib/sqlite3 install: /home/www/atma/.gems/gems/sqlite3-1.3.6/lib/sqlite3/sqlite3_native.so: chown/chgrp: Operation not permitted make: * [/home/www/atma/.gems/gems/sqlite3-1.3.6/lib/sqlite3/sqlite3_native.so] Error 71 Gem files will remain installed in /home/www/atma/.gems/gems/sqlite3-1.3.6 for inspection. Results logged to /home/www/atma/.gems/gems/sqlite3-1.3.6/ext/sqlite3/gem_make.out Any ideas how to approach this? Maybe re-installing RVM? best regards, PA

    Read the article

  • How can I get a user account back?

    - by Ilan
    With all my computers I make one partition for the root and another for /home. This is useful for disasters where I need to reformat the root for ubuntu, but leave my /home data untouched. With the upgrade to 13.10 I had troubles on my wife's computer so I reinstalled 13.10. My own /home files came up, as expected, as if nothing had happened. For my wife, it is a different story - and that is the part where I need help. If I go into Files, computer I can see the home directory. There I can see ilan (my files) and yona (my wife's files). I can open yona, documents and see all her work. This means that all is well and I just need to hook up to her files. So the problem is that I need to create a user called Yona or yona, but something which will get me to exactly the files of interest. I'm not sure if I created her account as standard or an administrator. Is there any way I could tell by looking at the files in /home? I created a new user called Yona as a standard user (hoping that this is the right guess). The account came up as disabled. I pressed on the disabled button so I could change the password. I put in her password but it was refused as too short. Too short, too short, but that is what was used and that is what I need. Can anyone help me before my wife comes home and shoots me? Thanks, Ilan

    Read the article

  • Robocopy, do not overwrite existing files, but copy the changed / new ones

    - by I don't know.
    Is it possible to mirror the two directories without overwritting the files in destination directory with new/changed/deleted files. Something like snapshots. Example: Copy the source directory with all files and sub-directories to destination directory, but if destination directory contains, for example, file A.xls and A.xls has been changed in source directory then copy A.xls but keep the previous A in destination directory as well. To preserve the previous file a datestamp, or counter can be added to the file name. Example after copy: SomeDirectory |--A.xls |--A_20120701.xls |--A_20120920.xls Thank you.

    Read the article

  • How to run django on localhost with nginx and uwsgi?

    - by user2426362
    How to run django on localhost with nginx and uwsgi? This im my config but not works. nginx: server { listen 80; server_name localhost; access_log /var/log/nginx/localhost_access.log; error_log /var/log/nginx/localhost_error.log; location / { uwsgi_pass unix:///tmp/localhost.sock; include uwsgi_params; } location /media/ { alias /home/user/projects/zt/myproject/myproject/media/; } location /static/ { alias /home/user/projects/zt/myproject/myproject/static/; } } uwsgi: [uwsgi] vhost = true plugins = python socket = /tmp/localhost.sock master = true enable-threads = true processes = 2 wsgi-file = /home/user/projects/zt/myproject/myproject/wsgi.py virtualenv = /home/user/projects/zt chdir = /home/user/projects/zt/myproject touch-reload = /home/user/projects/zt/myproject/reload This config work on my ubuntu server with normal domain (not localhost) but on localhost not working. If I run localhost in web browser I have Welcome to nginx!

    Read the article

  • vsftpd, virtual users and permissions. Avoid using chmod 777?

    - by Jakobud
    I am running vsftpd with Virtual Users (managed through a MySQL db). Each users home/default directory is owned by vsftpd:vsftpd. I need to give a user read/write permissions to some website files, owned by apache:apache so they can make some changes. I did a bind mount for the web directory to a directory in the ftp user's home/default directory. When logging in, the user is not able to write to the web folder, unless I set files to 777. Is it possible to set this up with making the directory and it's files 777? The web directory needs to be apache:apache in order for apache to work with it.

    Read the article

  • No rule to make target libmysql.c', needed bylibmysql.lo'. Stop

    - by user1711008
    I install mysql5.1.53, run #./configure is well, but run #make have this error. My system is centos5.8, gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) make[2]: Leaving directory /root/soft/mysql-5.1.53/libmysql' make[1]: Leaving directory/root/soft/mysql-5.1.53/libmysql' Making all in libmysql_r make[1]: Entering directory /root/soft/mysql-5.1.53/libmysql_r' make all-am make[2]: Entering directory/root/soft/mysql-5.1.53/libmysql_r' make[2]: * No rule to make target libmysql.c', needed bylibmysql.lo'. Stop. make[2]: Leaving directory /root/soft/mysql-5.1.53/libmysql_r' make[1]: *** [all] Error 2 make[1]: Leaving directory/root/soft/mysql-5.1.53/libmysql_r' make: * [all-recursive] Error 1

    Read the article

  • How do I install the Firestorm viewer for Second Life?

    - by Cordenne
    I am new to Ubuntu and trying to set everything up. I am VERY bad at doing that at the moment. In fact, I asked another question here only a few hours ago. Anyways, I am trying to get the Firestorm Viewer for Second Life. I followed instruction given here: http://michaelferrie.blogspot.com/2012_04_01_archive.html and came up with these end results: cordenne@ubuntu:~$ sudo apt-get install ia32-libs [sudo] password for cordenne: Reading package lists... Done Building dependency tree Reading state information... Done ia32-libs is already the newest version. The following packages were automatically installed and are no longer required: libnspr4-0d:i386 libgconf2-4:i386 libnss3-1d:i386 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded. cordenne@ubuntu:~$ '/home/cordenne/install.sh' You are not running as a privileged user, so you will only be able to install the Firestorm Viewer in your home directory. If you would like to install the Firestorm Viewer system-wide, please run this script as the root user, or with the 'sudo' command. Proceed with the installation? [Y/N]: Y - Installing to /home/cordenne/firestorm cp: cannot copy a directory, `/home/cordenne/firestorm', into itself, `/home/cordenne/firestorm/firestorm' Failed cordenne@ubuntu:~$ cordenne@ubuntu:~$ So, still no Firestorm. Can anyone help. PS: When it said - Installing to /home/cordenne/firestorm I felt it was talking to long to... I guess do anything so I pressed 'Enter'. I don't know if that made a difference but if it does, now you know!

    Read the article

  • Ownership/permissions of uploaded files

    - by Cudos
    Hello. I want to find out if I am on the right track. My script uploads files to the directory "images". The directory has this setup: owner/group = www-data Permissions = 700 Questions: Is this a good way to secure the directory from a hacker uploading files? Will the hacker be able to upload the files directly to the directory? Note: I have a bunch of other security measures in my upload script + an .htaccess script in the directory that disables script Execution. I just what to know if the permissions on the directory is sensible. I run apache 2.2

    Read the article

  • Reach self hosted server from LAN

    - by Freefri
    I have a self hosted server with Apache2 pointed with the domain example.com. I have also some virtual servers www.example.com, cloud.examle.com, etc. This server is in my LAN, and when I try to acces to my server within the lan throw www.examle.com y get my router's configuration page. From outside the LAN www.example.com and cloud.examle.com works properly. From inside the LAN 192.168.1.33 (server internal IP) shows the default webpage (www.examle.com), but I can not get cloud.examle.com I also have a LAN name server in 192.168.1.33 with bind9. I set up my gateway 192.168.1.1 with my LAN-NS as primary NS I solve this problem creating a new dns zone in the NS. This are my config files: ;ZONE-1 $ORIGIN . $TTL 86400 ; 1 day home.lan. IN SOA server.home.lan. hostmaster.home.lan. ( 2008080901 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) home.lan. IN NS server.home.lan. $ORIGIN home.lan. ; Set the address for localhost.home.lan localhost IN A 127.0.0.1 router IN A 192.168.1.1 server IN A 192.168.1.33 mypc IN A 192.168.1.132 ;ZONE-2 $ORIGIN . $TTL 86400 ; 1 day example.com. IN SOA www.example.com hostmaster.home.lan. ( 2008080902 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) example.com. IN NS 192.168.1.33 $ORIGIN examle.com. localhost IN A 127.0.0.1 www IN A 192.168.1.33 cloud IN A 192.168.1.33 My DNS and my names are working properly now My question are: What do you think about my solution? Can I change the A zone with CNAME to server.home.lan (this is the domain in the LAN to the server)? How can I set a default IP for all my whatever.example.com?

    Read the article

  • How to test whether an image is already in cache? [migrated]

    - by Evik James
    I am developing a web site that has a lot of large, high-quality images on the home page. On the home page, there is an image carousel that pulls ten high quality images from a database. The images can be 1 meg each. The carousel images aren't my problem (right now), but it has something to do with it. The problem I am trying to address right now is that I use a high quality background image that I want to continue using, it's about 180k. If I have the background in cache on the home page, I want to use it. If not, then I don't want to use it on the home page. I'll load it from a different page. When the user returns to the home page, and the background image is in cache, I want to use it. Can I test whether an image is already in cache and if so, dynamically load or NOT load based on that? You can see the home page here: http://flyingpiston2012-com.securec37.ezhostingserver.com/

    Read the article

  • Turn on PC power remotely through the Internet?

    - by W.N.
    I use SVN for my work at home and office, but I usually forget to commit the changes before shutdown. Therefore, I wish I could turn on my home/office PC at office/home. I already have TeamViewer installed on both PCs, so it will be okay as soon as the power is turned on. I have read many articles about this, I found both my PC and office computers support Wake-on-LAN. However, I don't know much about other config. And I need to turn on my computers through the Internet, not on LAN. My office Internet connection has static IP, however, my home Internet connection has dynamic IP, it changes as soon as I reset the modem, but it is not a big problem, I rarely turn the Internet modem off. And I don't have privilege to config office Internet connection, but I have Administration privilege on both PCs. Please give me details steps to turn on my office PC from home, and turn on my home PC from office.

    Read the article

  • Cant make my site available to the internet

    - by user1683645
    Hi I'm using ubuntu as server OS for my webhosting but I'm having problem redirecting my domainname to my server Here are my /etc/hosts file and /etc/apache2/sites-available/mysite file. hosts file: 127.0.0.1 www.lowkey.se The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters sites-available/file: ServerAdmin webmaster@localhost ServerName www.lowkey.se DocumentRoot /var/www/doost/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/doost/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined And a screenshot from my domain name provider: http://imgur.com/VyqBR the site has been enabled in ubuntu, I've restarted apache2 and the folder /var/www/doost/ is there. What am i doing wrong?

    Read the article

  • Move already (i.e. not new) completed files in rtorrent

    - by Skippy le Grand Gourou
    I've been using rtorrent for a while with a single directory. Now I figured out it was possible to use different directories and even to move completed downloads elsewhere, so according to the rtorrent wiki I edited my .rtorrent.rc as follow : # Download directory directory = /Medias/torrents/ # Watching directories schedule = watch_directory_1,5,60,"load_start=/path/to/dl/dir1/*.torrent,d.set_custom1=/path/to/done/dir1" schedule = watch_directory_2,5,60,"load_start=/path/to/dl/dir2/*.torrent,d.set_custom1=/path/to/done/dir2" # On completion, move the torrent to the directory from custom1. system.method.set_key = event.download.finished,move_complete,"d.set_directory=$d.get_custom1= ;execute=mv,-u,$d.get_base_path=,$d.get_custom1=" It seems to work for new torrents. However I have a bunch of completed files I have already downloaded before to split directories, and for them it does not work : if I delete their file in the session directory, rtorrent will check the hash but won't move them, and if I move them by myself rtorrent won't see them and will try to redownload them. So how can I tell rtorrent either to move them or that they are in another directory ? Thanks.

    Read the article

  • Linux Permissions

    - by Tres
    I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

    Read the article

  • Why would autoconf/automake project link against installed library instead of local development libr

    - by Beau Simensen
    I'm creating a library libgdata that has some tests and non-installed programs. I am running into the problem that once I've installed the library once, the programs seem to be linking to the installed version and not the local version in ../src/libgdata.la any longer. What could cause this? Am I doing something horribly wrong? Here is what my test/Makefile.am looks like: INCLUDES = -I$(top_srcdir)/src/ -I$(top_srcdir)/test/ # libapiutil contains all of our dependencies! AM_CXXFLAGS = $(APIUTIL_CFLAGS) AM_LDFLAGS = $(APIUTIL_LIBS) LDADD = $(top_builddir)/src/libgdata.la noinst_PROGRAMS = gdatacalendar gdatayoutube gdatacalendar_SOURCES = gdatacalendar.cc gdatayoutube_SOURCES = gdatayoutube.cc TESTS = check_bare check_PROGRAMS = $(TESTS) check_bare_SOURCES = check_bare.cc (libapiutil is another library that has some helper stuff for dealing with libcurl and libxml++) So, for instance, if I run the tests without having installed anything, everything works fine. I can make changes locally and they are picked up by these programs right away. If I install the package, these programs will compile (it seems like it does actually look locally for the headers), but once I run the program it complains about missing symbols. As far as I can tell, it is linking against the newly built library (../src/libgdata.la) based on the make output, so I'm not sure why this would be happening. If i remove the installed files, the local changes to src/* are picked up just fine. I've included the make output for gdatacalendar below. g++ -DHAVE_CONFIG_H -I. -I.. -I../src/ -I../test/ -I/home/altern8/workspaces/4355/dev-install/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -MT gdatacalendar.o -MD -MP -MF .deps/gdatacalendar.Tpo -c -o gdatacalendar.o gdatacalendar.cc mv -f .deps/gdatacalendar.Tpo .deps/gdatacalendar.Po /bin/bash ../libtool --tag=CXX --mode=link g++ -I/home/altern8/workspaces/4355/dev-install/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -L/home/altern8/workspaces/4355/dev-install/lib -lapiutil -lcurl -lgssapi_krb5 -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 -o gdatacalendar gdatacalendar.o ../src/libgdata.la mkdir .libs g++ -I/home/altern8/workspaces/4355/dev-install/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -o .libs/gdatacalendar gdatacalendar.o -L/home/altern8/workspaces/4355/dev-install/lib /home/altern8/workspaces/4355/dev-install/lib/libapiutil.so /usr/lib/libcurl.so -lgssapi_krb5 /usr/lib/libxml++-2.6.so /usr/lib/libxml2.so /usr/lib/libglibmm-2.4.so /usr/lib/libgobject-2.0.so /usr/lib/libsigc-2.0.so /usr/lib/libglib-2.0.so ../src/.libs/libgdata.so -Wl,--rpath -Wl,/home/altern8/workspaces/4355/dev-install/lib creating gdatacalendar Help. :) UPDATE I get the following messages when I try to run the calendar program when I've added the addCommonRequestHeader() method to the Service class after I had installed the library without the addCommonRequestHeader() method. /home/altern8/workspaces/4355/libgdata/test/.libs/lt-gdatacalendar: symbol lookup error: /home/altern8/workspaces/4355/libgdata/test/.libs/lt-gdatacalendar: undefined symbol: _ZN55gdata7service7Service22addCommonRequestHeaderERKSsS4_ Eugene's suggestion to try setting the $LD_LIBRARY_PATH variable did not help. UPDATE 2 I did two tests. First, I did this after blowing away my dev-install directory (--prefix) and in that case, it creates test/.libs/lt-gdatacalendar. Once I have installed the library, though, it creates test/.libs/gdatacalendar instead. The output of ldd is the same for both with one exception: # before install # ldd test/.libs/lt-gdatacalendar libgdata.so.0 => /home/altern8/workspaces/4355/libgdata/src/.libs/libgdata.so.0 (0xb7c32000) # after install # ldd test/.libs/gdatacalendar libgdata.so.0 => /home/altern8/workspaces/4355/dev-install/lib/libgdata.so.0 (0xb7c87000) What would cause this to create lt-gdatacalendar in one case but gdatacalendar in another? The output of ldd on libgdata is: altern8@goldfrapp:~/workspaces/4355/libgdata$ ldd /home/altern8/workspaces/4355/libgdata/src/.libs/libgdata.so.0 linux-gate.so.1 => (0xb7f7c000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb7f3b000) libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7dec000) /lib/ld-linux.so.2 (0xb7f7d000)

    Read the article

  • iPad: Mobile Safari, HTML5 <video>, and jquery transitions

    - by justinbach
    I'm building a simple proof-of-concept for an iPad-specific website that would use video transitions to bring users from section to section. For purposes of the proof of concept, each "section" is just an image with a semitransparent content text box positioned above it. There are just 2 sections, "home" and "contact", and they've got a transition video sandwiched between them via z-indexing. The idea for the proof of concept is that clicking on the "home" section causes it to disappear, followed by playback of the transition video, which (upon completion) disappears to reveal the "contact" section. Everything is working fine with this version of the demo on the iPad and on Safari for Windows and OS X. Here's the JS: var myVideo = document.getElementsByTagName('video')[0]; $('document').ready(function() { $('#home').click(function() { $(this).css('display','none'); myVideo.play(); myVideo.addEventListener('ended', function() { $('#transition').css('display','none'); }); }); }); What I'd like to do is use a jQuery fadeOut() effect to fade out the text box prior to starting the video when the "home" section is clicked. The code seems simple enough: $('document').ready(function() { $('#home').click(function() { $('#home-copy').fadeOut('slow', function() { $('#home').css('display','none'); myVideo.play(); myVideo.addEventListener('ended', function() { $('#transition').css('display','none'); $('#home-copy').fadeIn('slow'); }); }); }); }); and it's working exactly as desired on desktop versions of Safari. On the iPad, however, the text box fades out as expected and the home section disappears as well, but the video stubbornly refuses to start playing. I really don't know why this would be the case, but that's what's happening. I'd appreciate any advice you might have! Incidentally, here's the markup: <div id="main-container"> <div id="home-copy"> <h1>Lorem Ipsum Dolor Sit Amet</h1> <p>Donec blandit pharetra luctus. Nam at porttitor odio. Nullam sem orci, venenatis sed pharetra eget, commodo rhoncus quam. Ut euismod vehicula bibendum. Curabitur in magna ante, id fringilla lacus. Nullam id elit eget lacus feugiat porta. Nulla vitae orci vehicula risus sagittis egestas quis sed justo.</p> </div> <div id="home"> <img src="images/home.jpg" width="1152" height="720" /> </div> <video id="transition" src="video/home_to_contact_lo_res.mp4" preload width="1152" height="720"></video> <div id="contact"> <img src="images/contact.jpg" width="1152" height="720" /> </div> </div>

    Read the article

  • why could i not submit the form via php's curl?

    - by home
    $ua_s = 'Mozilla/5.0 (Windows; U; Windows NT 5.1; en; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14'; $c = curl_init($the_url); curl_setopt($c, CURLOPT_RETURNTRANSFER, true); curl_setopt($c, CURLOPT_FOLLOWLOCATION, 1); curl_setopt($c, CURLOPT_USERAGENT, $ua_s); curl_setopt($c, CURLOPT_POST, true); curl_setopt($c, CURLOPT_POSTFIELDS, $post_string); $cont = curl_exec($c); curl_close($c); send all needed fields but fail to submit it properly. wrote html form to test - all is well if done so in browser:

    Read the article

  • Java projects without swing

    - by Jeff Home
    I'm quite familiar with Java and I would like to work on a project on my free time but for some reason, I just hate having to work with swing. I'm wondering what kind of Java technologies are available out there that I can use for starting a project. Thank you.

    Read the article

  • MySQL 'user_id' in where clause is ambiguous problem

    - by HoMe
    How can I correct the problem I keep getting from the code below which states 'user_id' in where clause is ambiguous. Thanks for the help in advance. Here is the mysql table. SELECT user.*, user_info.* FROM user INNER JOIN user_info ON user.user_id = user_info.user_id WHERE user_id='$user_id'

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >