Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 220/783 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

• Is the hosts file ignored in windows if DNS Client service is running?

  - by Mnebuerquo

  I've seen a number of articles about how to edit the hosts file in Windows 7, but it's all about how to open notepad as administrator, not the actual behavior of the dns lookups afterward. I've read that the hosts file is ignored in XP SP2 if DNS Client service is running. I have tried this on my XP machine and it seems to be true. I can see how it is a security danger to have a hosts file that user programs could modify. If it could write to hosts, then any malware could spoof dns locally with minimal difficulty. I'm trying to use the hosts file for testing stuff on my local network without it going to the live site on the internet. At the same time I want to be able to use dns on the normal internet. Mostly though I just want to understand the rules on the newer windows systems. Thanks!

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• Remote desktop to multiple windows machines on a LAN with dynamic IP

  - by kevyn

  Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

  Read the article

• hybrid cable for QSFP to CX4 convertion

  - by John-ZFS

  here is a hybrid cable for QSFP to CX4. Will this fit SFP+ ports? Deeply confused by standards and struck in a situation with wrong hardware selection!Personally have not seen the ports/hardware and hence the obviously stupid question! thanks for stopping by and bearing with me. http://www.cablesondemand.com/pcategory/72/category/QSFP+-+CX4/URvars/Catalog/Library/InfoManage/QSFP_TO_CX4_COPPER_CABLES.htm

  Read the article

• Divide a network into two subnets of equal size

  - by kylex

  I have been given the following IP 192.168.14.137/25 and asked to divide the network into 2. This is what I've come up with: The subnet mask is therefore 255.255.255.128 The network address is 192.168.14.128 There are a total of 128 available addresses (including the network address and broadcast address) To divide the network we create to subnets: 192.168.14.128/26 192.168.14.192/26 This will have a subnet mask of 255.255.255.192 Am I missing anything, or is this correct?

  Read the article

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Mangling traffic from a Mikrotik Router

  - by TiernanO

  I have a MikroTik powered Router in the house with a couple of internet connections (2 200/10Mb Cable modems and a 100/20Mb VDSL Line). I am using Mangle rules to set routing marks and NAT rules to do some load balancing, and everything seems to be going grand... But it only works for traffic from outside the router... Let me explain: I have 4 GigE ports on the machine, WAN1,2 and 3, and a LAN port named LAN1. All traffic from LAN1 is getting mangled (as it should be) but traffic from the load router itself (proxy traffic, IPv6 tunnels, VPN connections) are not being mangled. They get the first route to 0.0.0.0/0, which in my case is WAN2, and stick with it. So, how do I get traffic from the local router to be mangled? Originally it was proxy traffic that caused the problem, but now with IPv6 and VPN, they are more important to be mangled... last time i enabled IPv6 traffic, all traffic only went though WAN2, and the rest where unused... Any ideas?

  Read the article

• Windows 7 file sharing password protecting or making stuff available to just me

  - by Carbonara

  Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on Mac OS. I found good description here Permanent Static Route Mac OS X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• How to find on the Windows 7 who and when use(d) a certain share?

  - by John Thomas

  We have a workstation using Win7 on a LAN with a domain. On that workstation we set up some network shares. Can we find who used (user name and/or computer name) and when the shares? Note that we know about Computer Management System Tools Shared Folders Open Files. We don't want to see so much real-time who's using the shares but we are interested more in a logging solution, ideally interpreting / using the data from Win7's Event Viewer.

  Read the article

• Automount of AFP shares on Lion clients from OS X Snow Leopard server - not working right

  - by Paul

  Recently upgraded Snow Leopard clients to Lion. AFP shares are set up as login items. The network shares on some of the machines now take a long time to come up (10 minutes). Several machines that were upgraded are acting normally, and three machines with clean installs of Lion (not upgraded) are also working normally. Is there a network file causing a conflict on some of these client machines? Thanks, Paul

  Read the article

• No WPA2 option in Windows XP SP3

  - by user34300

  I have a fresh Windows XP SP3 installation on several PCs but none of them has WPA/WPA2 option in Wireless Networks section of the connection properties regardless of wireless adapters they have (that supports WPA2). Can someone provide an advice on how to fix that?

  Read the article

• NIC is receiving, but not transmitting at all?

  - by Shtééf

  I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

  Read the article

• VPN software to use internet connection of remote network

  - by eych

  Which software will allow a VPN connection to a remote network and utilize that networks internet connection? Useful for unknown free wi-fi areas to connect to a solid connection elsewhere. Kind of like a remote desktop connection software (e.g. Teamviewer), but you just need internet access.

  Read the article

• How to install a "virtual" network card on a virtual server?

  - by vikp

  Hi, We have purchased an unmanaged VPS windows hosting solution from one of the UK based companies. We have Windows Server 2008 Standard Edition. We need to install certain third party applications on that server. Unfortunatelly, one of the applications requires a MAC address to be present at all times - this is their way of making sure that software is not pirated (which it isn't). We have tried installing a virtual loopback network card, but this has brought the server down - i.e. we couldn't connect using remote desktop any longer. At the moment we are limited with what we can try. This is an unmanaged solution, therefore any support including restarts is rather costly. Are you aware of any low-risk solutions? Thank you

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• What is the "in-the-wire" size of a ethernet frame? 1518 or 1542?

  - by chrisapotek

  According to the table here, it says that MTU = 1500 bytes and that the payload part is 1500 - 42 bytes or 1458 bytes (<- this is actually wrong!). Now on top of that you have to add IPv4 and UDP headers, which are 28 bytes (20 IP + 8 UDP). That leaves my maximum possible application message to as 1430 bytes! But by looking for this number in the Internet I see 1472 instead. Am I doing this calculation wrong here? All I want to find out is the maximum application message I can send over the wire without the risk of fragmentation. It is definitely not 1500 because that includes the frame headers. Can someone help? The confusion is the the PAYLOAD can actually be as large as 1500 bytes and that's the MTU. So now what is the size in-the-wire for a payload of 1500? From that table it can be as big as 1542 bytes. So the maximum app messages I can send is 1472 (1500 - 20 (ip) - 8 (udp)) for a maximum in the wire size of 1542. It amazes me how things can get so complicated when they are actually simple. And I have not clue how someone came up with the number 1518 if the table says 1542.

  Read the article

• how to make the remotedesktop and local connection work together

  - by user295189

  I want to allow connection to my desktop while I work on it too. currently if someone remotely logs on to my computer, I cant work on it then. Is there a way around. thanks

  Read the article

• How to create a cron job to upload files to an FTP server

  - by Christopher

  I would like to create a cron job that uploads files from a directory on my computer to my FTP server. I would like it to do it daily at midnight. I know pretty much nothing about cron, so I apologize if I sound stupid!

  Read the article

• Cisco ASA site-to-site vpn not initiating phase 1 (not sending udp 500 packets)

  - by Sean Steadman

  I am hoping someone here can help me with my problem. I am trying to setup an IPSEC site-to-site VPN between two cisco ASA 5520's in GNS3 (both using 8.4.2). I have been unsuccesful in getting the tunnel up and it appears neither ASA is sending packets out,in regards to phase 1 and phase 2 (tested by using wireshark and seeing NO udp 500 packets). Doing show ipsec sa and such shows nothing. CALIFORNIA(config)# show ipsec sa There are no ipsec sas FLA-ASA# show ipsec sa There are no ipsec sas I will attach both configurations in two different pastebin files as to keep this post a bit cleaner. Essentially California side has 172.20.1.0/24 and Florida side has 10.10.10.0/24. California ASA config: http://pastebin.com/v0pngYzF Florida ASA config: http://pastebin.com/E2geybta Please let me know if there is any other vital information that could help. I have gotten IPSEC tunnels to work using openSwan (linux) and cisco routers but cannot for the life of me get ASA IPSEC tunnels to work. The ASDM is out of the question I only use cli. Thanks for any useful help!

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• Do I need a Gigabit router with a 24Mbps down and 7Mbps upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24Mbps down and 7Mbps upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 Mbps port can easily handle it. Is that true?

  Read the article

• TCP: Treason uncloaked!

  - by hurikhan77

  On one linux server (Gentoo hardened), we are experiencing bursts of the following messages in dmesg from time to time: TCP: Treason uncloaked! Peer xx.xx.xxx.xxx:65039/80 shrinks window 4094157295:4094160199. Repaired. Is there anything we should take care of or is this normal?

  Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >