Search Results

Search found 9730 results on 390 pages for 'restart programs'.

Page 221/390 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Why does my Mac address reset after reconnecting?

  - by Mr.Student

  I have ubuntu 12. I'm changing my mac address with ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx which works. However when I restart my connection my computer resets my mac to my original mac address. I'm guessing that this happens because something calls... ifconfig wlan0 down ... do something before connecting ifconfig wlan0 up ... connect to designated access point I want my mac address to however be the same no matter how many times I disconnect and reconnect, whether to another network or the same one. Also it would be nice to turn off the auto-connect feature for my network-manager with out having to edit each individual connection. Lastly I would like to know how to connect to a wifi network through the terminal and not via gui network manager ubuntu provides.

  Read the article

• Keyboard doesn't work after Windows resume from sleep (S3) -- how to fix?

  - by Marco Z

  I have a weird issue with my keyboard after resuming from S3 sleep: I can type perfectly for maybe 5 seconds, but afterwards the keyboard ceases to work until I hibernate or restart (or sleep again -- see below.) The rest of my system runs just fine -- just the keyboard apparently "freezes" up. Some closer observations: The keyboard will work for 5 seconds (and freeze again) every time I resume from sleep, even if it was frozen from a previous sleep The caps lock light will work fine within the 5 seconds. But after the keyboard "freezes", the light will remain on, but I'll be unable to turn it off. Perhaps this means power wasn't cut off from the keyboard, but it's just some software freezing up the port??? Given this info, would this indicate a problem with Windows itself? Drivers, maybe? Can I rule out the BIOS as the culprit? Finally, any ideas on how to fix? Thanks! Specs: Windows 7 x64 HP tx1000 laptop

  Read the article

• Oracle Logical Standby redo generation

  - by DCookie

  Oracle 10.2.0.4 database with a logical standby on Win2K3. Recently a rather large delete operation was carried out on the production instance. I'm experiencing difficulty with the logical standby, in that it gets a couple of hundred (58M size) archive logs into the operation and the apply process fails with an out-of-memory error. Unfortunately, every time it fails it has to restart the apply from the beginning of the transaction. This is taking a couple of days each time. Anyway, in trying to resolve this problem, I've noticed that each archive log from the production system generates 5 or 6 log switches on the standby. I don't understand why this should be. Anyone have any ideas? A related question that I've not found the answer for: does anyone know if the logical standby must be running in archivelog mode? I really don't have a need to keep the logs.

  Read the article

• Asterisk doesn't start properly at system startup. DNS lookup fails.

  - by leiflundgren

  When I start my Ubuntu system it attempts two DNS lookups. One to find out what my internet-routers external ip is. And one to find the IP of my PSTN-SIP-provider. Both fails. [Apr 7 22:14:54] WARNING[1675] chan_sip.c: Invalid address for externhost keyword: sip.mydomain.com ... [Apr 7 22:14:54] WARNING[1675] acl.c: Unable to lookup 'sip.myprovider.com' And since the DNS fails it cannot register properly a cannot make outgoing or incoming calls. If I later, after bootup, restart asterisk everything works excelent. Any idea how I should setup things so that either: Delay Asterisk startup so that DNS is up and healthy first. Somehow get Asterisk to re-try the DNS thing later. Regards Leif

  Read the article

• Can't reinstall Office 2010

  - by Sniffer

  I had Office 2010 Professional Plus installed on my Windows 7 (32 bit machine), then I decided to remove it and install the 2013 version. I went to Programs and Features and removed the software as always, everything went successfully and it asked me to reboot the machine in order to complete the un-installation process, and when I clicked reboot a message suddenly appears telling me that an error occurred during un-installation and the system restarts instantly before I get a chance to see the error message. After that I tried to re-install Office 2010 but after the installer seems to have finished, it tells me that the installation failed without an explanations ? I have taken a look at the event viewer and there is some error saying the office protection platform service failed to start, could this have anything to do with the problem? What could be the cause, how can I fix this ?

  Read the article

• Extract first page from multiple pdfs

  - by Tim Alexander

  Have got about 500 PDFs to go through and extract the first page of. They then need to go through some time consuming conversion process so was hoping to try and save some time by have a batch process to extract just the first page from the 500 pdfs and place it in a new pdf. Have had a poke around Acrobat but can find no real method of doing this for multiple files. Does anyone know any other programs or methods that this could be achieved? Free and open source are obviously more favourable :) EDIT: Have actually had some success using GhostScript to extract just one page. Am now looking at how to batch that and take the list of files and use those.

  Read the article

• Printer offline until spooler service is restarted multiple times

  - by Zian Choy

  When I try to print from my ThinkPad to a printer shared through a Windows 7 Homegroup hosted by a desktop computer, I often have to restart the Print Spooler service several times before the job will go through. In particular, this problem occurs when the desktop is in sleep mode when the print job is started and then brought out of sleep mode after the print job has been kicked off. Both computers are running Windows 7 32-bit edition with the latest patches. I have tried the following with no improvement: SNMP registry hack (see MS KB for details) Following the instructions in a blog post entitled "Sharing Printers on Vista 64-bit" Looking at Printer offline until spooler service is restarted

  Read the article

• Daemons did not start automatically ubuntu 10.04

  - by Anton Prokofiev

  Hello, All! I have a strange behavior on Ubuntu 10.4: few daemons (apache2 and postgresql (8.4SS from enterpriseDB) did not start automatically. Funny things that time-to-to they do. (If I just restart my computer everything looks ok, but if I turn it off for the night, nothing work..., so I have to start them manually) I've googled this problem a little bit, but the only answer I have found was to run: sudo update-rc.d apache2 defaults I've called it but the answer was: System start/stop links for /etc/init.d/apache2 already exist. Any Ideas?

  Read the article

• Thunderbird 3.0 refuses to start on Mac OS X?

  - by jtimberman

  I just downloaded Thunderbird 3.0 on my Macbook Pro running Leopard, and installed it in /Applications. When I attempt to start it, the icon opens on the Dock as normal, but I get the following dialog. I don't have a ~/Library/Application Support/Thunderbird directory at all, let alone a .parentlock file. While I didn't expect it to help, I did reboot my system. And sign out and back in. And close all programs besides Thunderbird. Earlier versions of Thunderbird have worked just fine.

  Read the article

• How to broadcast a command on Windows

  - by Xiao Jia

  I am going to frequently deploy different versions of a program on a cluster of Windows machines (mostly Windows XP), so I am willing to use a command-line broadcasting tool (either built-in or 3rd-party) to (1) download a file from some URL, and (2) execute the same command, on all the machines. I googled for a very long time but got nothing related to my goal. (Only pages about broadcasting a message, broadcasting ping, or programmatically broadcast via TCP/IP, etc.) Are there any tool for this purpose? Or is it possible to do it pragmatically (without installing extra client programs on those machines)?

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• Windows media player 12 not launching from custom program

  - by Supertrolly

  There is a program we use for testing that calls windows media player and plays a media file. The problem is that windows media player fails to load unless you open and close it before starting the program. After that the program will open it every time without a hitch but after a reboot it is lost and you must do it again. My question is what could be voilate setting could windows media player have that would be lost on a reboot? I have tried programs like Regshot to capture changes to the registry that might be delated on reboot. The code for the program is very straight forward simply calling windows media player with a parameter with the media to play. Using process montior I have determined that is is crashing shortly after the program executes it. I am at a lost on this problem as I can not find what if anything it is changing to run windows media player.

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• How much RAM 64bit Windows 8 reserves to OS internal use?

  - by Barleyman

  Windows reserves some memory for it's internal use which is not normally allocated to applications. This reserve is seen most easily if you run without a page file or limit the pagefile to relatively small size (such as 3GB). Windows will allocate primarily RAM up to the limit, fill up remaining free space in the page file (if any) and issue a low memory warning when there is no page file space left and the allocated RAM limit is exceeded. The limit appears to be a percentage of the total system RAM. Windows 7 x64 limit is discussed here and methods for circumventing the "low memory warning" is discussed here. Disabling the low memory warning has some advantages - You can use some 600MB more RAM on 8GB machine) But there is a serious disadvantage - When you're out of ram, programs will crash. How much RAM can you allocate on 8GB Windows 8 x64 before you get the low memory warning? Is it possible to adjust the warning threshold?

  Read the article

• Setup a automatic server reboot on when a particular service fails

  - by user1179459

  I am running linux based server (centos 6.0) with cpanle and WHM, I have critical website running with a chat server which uses a openfire as the chat server backend server, i have monitored last few weeks this service crashes quite often, i have no way of knowing that, and i have to wait till the next day to restart the server. (and this can only be fixed by using server reboot as its got to do with some java memory problem) is there a way i can setup a monitoring service to the server and if this service goes down server itself will reboot ? is this something possible or is there a better way to overcome this problem ?

  Read the article

• OSX Lion - Stuck in Drag mode and mouse click events are not going through. Can I manually generate a mouseup event?

  - by Yuji Tomita

  My mouse is stuck in "drag" mode. This generally happens in Photoshop, but happens dragging files and such as well. Clicking rapidly here and there generally solves the problem. Sometimes though, it won't go away until a restart. Unplugging devices, etc., doesn't do anything. For example, right now, my mouse moves but can not click anything so I am using the keyboard to navigate this site. Is there a way to "reset" however the OS stores mouse states? Can I manually fire off a MouseUp event? It's strange that even when human input devices are unplugged, the files are still in drag state.

  Read the article

• outlook freezes on splash screen - loading profile

  - by sammarcow

  I have a user with a frustrating application crash issue without Outlook: Windows 7 x64 Outlook 2010 crashes on the splash screen with the message "loading profile." I have deleted the users .ost file in "..\AppData\Local\Microsoft\Outlook\" and this crash occurs for multiple users including those with administrator privileges. I have also tried running outlook at the command prompt as an admin with the /safe command-line switch. I tried the repair utility in "programs and features by clicking Change after selecting Microsoft Office:" ~~ Microsoft office failed to successfully repair your product . I tried to uninstall Microsoft Office ~~ Microsoft Office failed to successfully uninstall this product. I am trying to avoid reimaging the machine for obvious reasons. Is there anything else I can try or insight any one has on this issue?

  Read the article

• Can I do an overwrite install of Windows 7 without losing all my apps and data?

  - by Brian Dougan

  My local computer technician installed his store's copy of Window's 7 Premium on my computer. I had been using Window's Vista; but needed the XP component of "7" As part of the price I paid; I have a fully licensed, unopened "7" disc; with all of the drivers included. The technician warned me about the "nag" screen; that asks me to install my licensed copy at any time. Without thinking; I downloaded all of my usual software programs before installing the licensed copy. Here is my question: I hope this won't sound obvious: Will it overwrite my downloads?

  Read the article

• Link to a folder in the top Ubuntu panel

  - by Seamus

  Hi. I like the little top panel thing in Ubuntu. I have links to all my most used programs on there. (Which is why I don't see the point of docky or any of those things: they seem to do the same job, but they're messier). What I'd like is to have a little icon for my documents folder up there too. But I don't seem to be able to do it. It's not one of the options listed when you go to "add to panel...". Am I missing something ridiculously easy?

  Read the article

• Apt Stalls When Using HTTP Sources

  - by UltraNurd

  I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

  Read the article

• IISReset to remote server fails

  - by Rob

  I'm attempting to run iisreset 192.168.100.182 (against a Windows Server 2003 machine) from another machine on the same domain (running Windows 7 Professional) and am receiving the following error message: Attempting stop... Restart attempt failed. Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to the administrator local group of the remote computer or to the domain administrator global group. I'm running the command from an elevated command prompt with my domain account added to the Administrators group on the target machine. I've attempted this when being a member of the administrators group both directly and by virtue of membership of a domain group that's a member of the administrators group. I've reviewed the event log on the target machine and it shows a selection of Success Audits for my domain credentials immediately after attempting the iisreset, but no failure audits.

  Read the article

• What tool can I use to definitely kill a process on Windows?

  - by Moak

  Can anyone recommend an application (preferably usb-portable that doesn't require setup) That really kills a process immediately in windows XP? I ask this because often when I need to use the XP task manager it seems to want to go about it "the polite way" and sometimes crashed programs don't quit or take a minute to shut down. I need a real stone cold killer, not a pushover-could-you-please-quit-now-no?-ok-sorry-program Edit I'm sorry if it wasn't clear previously but I did mean the situation when even the "End process" command in Process tab of the task manager doesn't kill a program, however one of the answers did point me to the "End Process Tree" command which I've never noticed (when right clicking on the process)

  Read the article

• Windows: How to add batch-script action to Right Click menu

  - by ervingsb

  I have a few programs that creates temp files or backup files or similar files that are not important. For example, GVim for Windows by default creates a backup file in filename.txt~. I sometimes need to clean up a dir and remove all these files. I have made a simple .bat file for this. However, it is cumbersome to have to start up cmd, navigate to the folder, run the script. Especially since this is a script that I would like to run often on various folders. And I do not want to copy the script to multiple folders, as this would be a maintenance nightmare. So, I was thinking, that the best solution would be to add a Right Click menu item that allows me to run the script. So that I can right click on a folder in Explorer and click Cleanup and then have my script run on this folder. So my question is: How do I add a right click menu action that runs a custom batch script?

  Read the article

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Stop Windows 7 from forcefully shutting itself down when waiting to update

  - by Kenneth

  I have had this happen to me twice now. I'll be in the middle of working on something that has resulted in me not rebooting my machine for several days. If Windows 7 is waiting to install updates it'll eventually get to a point where it forces a restart to install the updates. The problem is that it doesn't notify me or tell me that its going to do this and I've lost work as a result and most recently had a VM become corrupt and unusable. Is there a way to at least get it to prompt me before doing this? It used to...

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >