Search Results

Search found 6028 results on 242 pages for 'total commander'.

Page 221/242 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

  • Newbie - what do I need to do with httpd.conf to make CakePHP work correctly?

    - by EmmyS
    (Not sure if this belongs here or on webmasters; please move if necessary.) I'm a total newbie to Cake and not much better with apache; I've done a lot of PHP but always with a server that's already been set up by someone else. So I'm going through the basic blog tutorial, and it says: A Note On mod_rewrite Occasionally a new user will run in to mod_rewrite issues, so I'll mention them marginally here. If the Cake welcome page looks a little funny (no images or css styles), it probably means mod_rewrite isn't functioning on your system. Here are some tips to help get you up and running: Make sure that an .htaccess override is allowed: in your httpd.conf, you should have a section that defines a section for each Directory on your server. Make sure the AllowOverride is set to All for the correct Directory. Make sure you are editing the system httpd.conf rather than a user- or site-specific httpd.conf. For some reason or another, you might have obtained a copy of CakePHP without the needed .htaccess files. This sometimes happens because some operating systems treat files that start with '.' as hidden, and don't copy them. Make sure your copy of CakePHP is from the downloads section of the site or our SVN repository. Make sure you are loading up mod_rewrite correctly! You should see something like LoadModule rewrite_module libexec/httpd/mod_rewrite.so and AddModule mod_rewrite.c in your httpd.conf." I'm using XAMPP on linux. I've found my httpd.conf file in opt/lampp/ etc, but am not sure what I need to do with it. I've searched for "rewrite", and there's only one line: LoadModule rewrite_module modules/mod_rewrite.so There's nothing about AddModule mod_rewrite.c. Do I just create a Directory section for the directory I've installed Cake in and set AlllowOverride to All? (I created a separate subdirectory of my wwwroot and installed in there, since I also have installs of Joomla and CodeIgniter.) Is there anything else I need to do? My download of Cake did come with two htaccess-type files (._.htaccess and .htaccess) - do I need to do anything with them? Thanks for any help you can provide to this non-server-admin. EDIT TO ADD virtual host sample: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/docs/dummy-host.example.com ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog logs/dummy-host.example.com-error_log CustomLog logs/dummy-host.example.com-access_log common </VirtualHost>

    Read the article

  • CSS Z-Index with Gradient Background

    - by Jona
    I'm making a small webpage where the I would like the top banner with some text to remain on top, as such: HTML: <div id = "topBanner"> <h1>Some Text</h1> </div> CSS: #topBanner{ position:fixed; background-color: #CCCCCC; width: 100%; height:200px; top:0; left:0; z-index:900; background: -moz-linear-gradient(top, rgba(204,204,204,0.65) 0%, rgba(204,204,204,0.44) 32%, rgba(204,204,204,0.12) 82%, rgba(204,204,204,0) 100%); /* FF3.6+ */ background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(204,204,204,0.65)), color-stop(32%,rgba(204,204,204,0.44)), color-stop(82%,rgba(204,204,204,0.12)), color-stop(100%,rgba(204,204,204,0))); /* Chrome,Safari4+ */ background: -webkit-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* Chrome10+,Safari5.1+ */ background: -o-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* Opera 11.10+ */ background: -ms-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* IE10+ */ background: linear-gradient(to bottom, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* W3C */ filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#a6cccccc', endColorstr='#00cccccc',GradientType=0 ); /* IE6-9 */ } /*WebPage Header*/ h1{ font-size:3em; color:blue; text-shadow:#CCCCCC 2px 2px 2px, #000 0 -1px 2px; position: absolute; width: 570px; left:50%; right:50%; line-height:20px; margin-left: -285px; z-index:999; } The z-index works fine, except that because I'm using a gradient any time I scroll down the elements behind the banner are still visible, albeit somewhat transparent. Is there any way to make them total invisible? i.e., what I'm trying to do is make it as though the banner is a solid color, even though it's a gradient. Thanks in advance for any help!

    Read the article

  • C++ - Breaking code implementation into different parts

    - by Kotti
    Hi! The question plot (a bit abstract, but answering this question will help me in my real app): So, I have some abstract superclass for objects that can be rendered on the screen. Let's call it IRenderable. struct IRenderable { // (...) virtual void Render(RenderingInterface& ri) = 0; virtual ~IRenderable() { } }; And suppose I also have some other objects that derive from IRenderable, e.g. Cat and Dog. So far so good. I add some Cat and Dog specific methods, like SeekForWhiskas(...) and Bark(...). After that I add specific Render(...) method for them, so my code looks this way: class Cat : public IRenderable { public: void SeekForWhiskas(...) { // Implementation could be here or moved // to a source file (depends on me wanting // to inline it or not) } virtual void Render(...) { // Here comes the rendering routine, that // is specific for cats SomehowDrawAppropriateCat(...); } }; class Dog : public IRenderable { public: void Bark(...) { // Same as for 'SeekForWhiskas(...)' } virtual void Render(...) { // Here comes the rendering routine, that // is specific for dogs DrawMadDog(...); } }; And then somewhere else I can do drawing the way that an appropriate rendering routine is called: IRenderable* dog = new Dog(); dog->Render(...); My question is about logical wrapping of such kind of code. I want to break apart the code, that corresponds to rendering of the current object and it's own methods (Render and Bark in this example), so that my class implementation doesn't turn into a mess (imagine that I have 10 methods like Bark and of course my Render method doesn't fit in their company and would be hard to find). Two ways of making what I want to (as far as I know) are: Making appropriate routines that look like RenderCat(Cat& cat, RenderInterface* ri), joining them to render namespace and then the functions inside a class would look like virtual void Render(...) { RenderCat(*this, ...); }, but this is plain stupid, because I'll lose access to Cat's private members and friending these functions looks like a total design disaster. Using visitor pattern, but this would also mean I have to rebuild my app's design and looks like an inadequate way to make my code complicated from the very beginning. Any brilliant ideas? :)

    Read the article

  • Recommended ASP.NET Shared Hosting

    - by coffeeaddict
    Ok, I have to admit I'm getting fed up with www.discountasp.net's pricing model and this annoyance has built up over the past 8 years or so. I've been with them for years and absolutely love them on the technical side, however it's getting ridiculously expensive for so little that you get. I mean here's my scenario: 1) I am running 2 SQL Server databases which costs me $10/ea per month so that's $20/month for 2 and I only get 500 mb disk space which is horrible 2) I am paying $10/mo just for the hosting itself which I only get 1 gig of disk space! I mean common! 3) I am simply running 2 small apps (Screwturn Wiki & Subtext Blog)...so I don't really care if it's up 99% or not, it's not worth paying a total of $300 just to keep these 2 apps running over discountasp.net Anyone else feel the same? Yes, I know they have great support, probably have great servers running behind this but in the end I really don't care as long as my site is up 95% or better. Yes, the hosting toolset rocks. But you know I bet you I can find a similar set somewhere else. I like how I can totally control IIS 7 at discountasp and I can control my own app pool etc. That's very powerful and essential. But anyone have any good alternatives to discountasp that gives me close to the same at a much more reasonable cost point? I mean http://www.m6.net/prices.aspx gives you 10 SQL Databases for $7 and 200 gigs disk space! I don't know about their tools or support but just looking at those numbers and some other hosts I've seen, I feel that discountasp.net is way out of line. They don't even offer any purchasing discounts such as it would be nice if my 2nd SQL Server is only $5/month not $10...stuff like this, to make it much more realistic and fair. Opinions (people who do have discountasp.net, people who have left them, or people who have another host they like)??? But geez $300 just to host a couple DBs and lightweight open source apps? Not worth the price they are charging. I'm almost at a price point that enables me to get a decent dedicated server! I really don't care about beta support. Not a big deal to me.

    Read the article

  • maven-ear-plugin works if jboss version is 4.2, but not 5. Why ?

    - by NSINGH
    I am using maven to configure maven-ear-plugin. I am getting following exception when I say jboss version is 5 (See below code, under tag). It works if I replace version to 4.2 <build> <finalName>tactical</finalName> <plugins> <plugin> <artifactId>maven-ear-plugin</artifactId> <configuration> <version>5</version> <defaultJavaBundleDir>lib</defaultJavaBundleDir> <jboss> <version>5</version> <loader-repository>seam.jboss.org:loader=tactical</loader-repository> </jboss> <modules> <ejbModule> <groupId>${project.groupId}</groupId> <artifactId>tactical-jar</artifactId> </ejbModule> </modules> </configuration> </plugin> </plugins> </build> Why it works fine for jboss 4.2 but not for 5. What ?? I get the following exception: [INFO] Failed to initialize JBoss configuration Embedded error: Invalid JBoss configuration, version[5] is not supported. [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.lifecycle.LifecycleExecutionException: Failed to initialize JBoss configuration at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:583) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(DefaultLifecycleExecutor.java:49 9) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:478) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.jav a:330) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:291) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:142) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:336) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:129) at org.apache.maven.cli.MavenCli.main(MavenCli.java:287) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.plugin.MojoExecutionException: Failed to initialize JBoss configuration at org.apache.maven.plugin.ear.AbstractEarMojo.execute(AbstractEarMojo.java:159) at org.apache.maven.plugin.ear.GenerateApplicationXmlMojo.execute(GenerateApplicationXmlMojo.java:96) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:451) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:558) ... 16 more Caused by: org.apache.maven.plugin.ear.EarPluginException: Invalid JBoss configuration, version[5] is not supported. at org.apache.maven.plugin.ear.JbossConfiguration.(JbossConfiguration.java:95) at org.apache.maven.plugin.ear.AbstractEarMojo.initializeJbossConfiguration(AbstractEarMojo.java:296) at org.apache.maven.plugin.ear.AbstractEarMojo.execute(AbstractEarMojo.java:155) ... 19 more [INFO] ------------------------------------------------------------------------ [INFO] Total time: 2 seconds Any idea. Thanks

    Read the article

  • Javascript wont change value in TextBox

    - by mattgcon
    Here is my javascript function AppendValues(e) { var lghtcnt = 0; var vars = e.id.split(';'); var highcnt = false; var lghtid = ""; var maxltcnt = 100; for (var x = 0; x < vars.length; x++) { var tokens = vars[x].split('|'); var pram = tokens if (tokens[0] == "ID"){ lghtid = tokens[1]; } if (tokens[0] == "LTC"){ var itemcnt = 0; var currentcnt = 0; currentcnt = parseInt(tokens[1].toString()); var txtid = document.getElementById(vars[0] + ';' + vars[1] + ';' + vars[2] + ';' + vars[3] + ';' + vars[4]); if (e.checked) { totallightcnt += currentcnt; if (totallightcnt > maxltcnt) { document.getElementById(vars[0] + ';' + vars[1] + ';' + vars[2] + ';' + vars[3] + ';' + vars[4]).value = 0; alert('This puts you over the limit of 100 total lights, please make adjustments.'); break; } document.getElementById(vars[0] + ';' + vars[1] + ';' + vars[2] + ';' + vars[3] + ';' + vars[4]).value = currentcnt.toString(); } else { totallightcnt -= currentcnt; document.getElementById(vars[0] + ';' + vars[1] + ';' + vars[2] + ';' + vars[3] + ';' + vars[4]).value = 0; break; } } if (highcnt) { break; } } } Here is the issue, when I check the value it DOES say theupdated value but it does not display to the user on the webpage. What could be the issue?

    Read the article

  • What variable dictates position of non-focused elements in the roundabout plugin?

    - by kristina childs
    Part of the problem here is that i'm not sure what the best language to use in order to find the solution. I search and searched so please forgive if this is already a thread somewhere. I'm using the roundabout plugin to cycle through 3 divs. Each div is 794px wide, which makes the roundabout-in-focus element 794 and the two not in focus 315.218px wide, positioned so half of each is hidden by the in-focus div. This is all well and good, however the total width of the display needs to stay within 1000px (ideally 980px, but i can fudge if need be.) Basically I want to make the non-focused divs be 3/4 hidden by the in-focus div but for the life of me can't figure out what variables i need to edit in order to do it. Unfortunately it's not one of the many easily-changed options like z-index and minScale. i tried minScale but it's clear this isn't going to work. the plugin outputs this code: <li class="roundabout-moveable-item" style="position: absolute; left: -57px; top: 205px; width: 319.982px; height: 149.513px; opacity: 0.7; z-index: 146; font-size: 5.6px;"> i need to find out what changes the left positioning so it's shifted closer to the center of the stage, like this: <li class="roundabout-moveable-item" style="position: absolute; left: 5px; top: 205px; width: 319.982px; height: 149.513px; opacity: 0.7; z-index: 146; font-size: 5.6px;"> i tried playing with the positioning functions of the plugin but all that did was shift everything in tandem left or right. any help is greatly appreciated. this site is going to be awesome once i figure out all this jquery stuff! here is a link to my .js file: http://avalon.eaw.com/scripts/jquery.roundabout2.js i've got an overflow:hidden on the to help guide the positioning of those no-focused items.

    Read the article

  • How to solve High Load average issue in Linux systems?

    - by RoCkStUnNeRs
    The following is the different load with cpu time in different time limit . The below output has parsed from the top command. TIME LOAD US SY NICE ID WA HI SI ST 12:02:27 208.28 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:23:22 195.48 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:34:55 199.15 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 13:41:50 203.66 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st 13:42:58 278.63 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st Following is the additional Information of the system? cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4658.69 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4654.99 clflush size : 64 power management: Memory: total used free shared buffers cached Mem: 2 1 1 0 0 0 Swap: 5 0 5 let me know why the system is getting abnormally this much high load?

    Read the article

  • Memory leaks getting sub-images from video (cvGetSubRect)

    - by dnul
    Hi, i'm trying to do video windowing that is: show all frames from a video and also some sub-image from each frame. This sub-image can change size and be taken from a different position of the original frame. So , the code i've written does basically this: cvQueryFrame to get a new image from the video Create a new IplImage (img) with sub-image dimensions ( window.height,window.width) Create a new Cvmat (mat) with sub-image dimensions ( window.height,window.width) CvGetSubRect(originalImage,mat,window) seizes the sub-image transform Mat (cvMat) to img (IplImage) using cvGetImage my problem is that for each frame i create new IplImage and cvMat which take a lot of memory and when i try to free the allocated memory I get a segmentation fault or in the case of the CvMat the allocated space does not get free (valgrind keeps telling me its definetly lost space). the following code does it: int main(void){ CvCapture* capture; CvRect window; CvMat * tmp; //window size window.x=0;window.y=0;window.height=100;window.width=100; IplImage * src=NULL,*bk=NULL,* sub=NULL; capture=cvCreateFileCapture( "somevideo.wmv"); while((src=cvQueryFrame(capture))!=NULL){ cvShowImage("common",src); //get sub-image sub=cvCreateImage(cvSize(window.height,window.width),8,3); tmp =cvCreateMat(window.height, window.width,CV_8UC1); cvGetSubRect(src, tmp , window); sub=cvGetImage(tmp, sub); cvShowImage("Window",sub); //free space if(bk!=NULL) cvReleaseImage(&bk); bk=sub; cvReleaseMat(&tmp); cvWaitKey(20); //window dimensions changes window.width++; window.height++; } } cvReleaseMat(&tmp); does not seem to have any effect on the total amount of lost memory, valgrind reports the same amount of "definetly lost" memory if i comment or uncomment this line. cvReleaseImage(&bk); produces a segmentation fault. notice i'm trying to free the previous sub-frame which i'm backing up in the bk variable. If i comment this line the program runs smoothly but with lots of memory leaks I really need to get rid of memory leaks, can anyone explain me how to correct this or even better how to correctly perform image windowing? Thank you

    Read the article

  • How to access a field's value in an object using reflection

    - by kentcdodds
    My Question: How to overcome an IllegalAccessException to access the value of a an object's field using reflection. Expansion: I'm trying to learn about reflection to make some of my projects more generic. I'm running into an IllegalAccessException when trying to call field.getValue(object) to get the value of that field in that object. I can get the name and type just fine. If I change the declaration from private to public then this works fine. But in an effort to follow the "rules" of encapsulation I don't want to do this. Any help would be greatly appreciated! Thanks! My Code: package main; import java.lang.reflect.Field; public class Tester { public static void main(String args[]) throws Exception { new Tester().reflectionTest(); } public void reflectionTest() throws Exception { Person person = new Person("John Doe", "555-123-4567", "Rover"); Field[] fields = person.getClass().getDeclaredFields(); for (Field field : fields) { System.out.println("Field Name: " + field.getName()); System.out.println("Field Type: " + field.getType()); System.out.println("Field Value: " + field.get(person)); //The line above throws: Exception in thread "main" java.lang.IllegalAccessException: Class main.Tester can not access a member of class main.Tester$Person with modifiers "private final" } } public class Person { private final String name; private final String phoneNumber; private final String dogsName; public Person(String name, String phoneNumber, String dogsName) { this.name = name; this.phoneNumber = phoneNumber; this.dogsName = dogsName; } } } The Output: run: Field Name: name Field Type: class java.lang.String Exception in thread "main" java.lang.IllegalAccessException: Class main.Tester can not access a member of class main.Tester$Person with modifiers "private final" at sun.reflect.Reflection.ensureMemberAccess(Reflection.java:95) at java.lang.reflect.AccessibleObject.slowCheckMemberAccess(AccessibleObject.java:261) at java.lang.reflect.AccessibleObject.checkAccess(AccessibleObject.java:253) at java.lang.reflect.Field.doSecurityCheck(Field.java:983) at java.lang.reflect.Field.getFieldAccessor(Field.java:927) at java.lang.reflect.Field.get(Field.java:372) at main.Tester.reflectionTest(Tester.java:17) at main.Tester.main(Tester.java:8) Java Result: 1 BUILD SUCCESSFUL (total time: 0 seconds)

    Read the article

  • Moving from Windows to Ubuntu.

    - by djzmo
    Hello there, I used to program in Windows with Microsoft Visual C++ and I need to make some of my portable programs (written in portable C++) to be cross-platform, or at least I can release a working version of my program for both Linux and Windows. I am total newcomer in Linux application development (and rarely use the OS itself). So, today, I installed Ubuntu 10.04 LTS (through Wubi) and equipped Code::Blocks with the g++ compiler as my main weapon. Then I compiled my very first Hello World linux program, and I confused about the output program. I can run my program through the "Build and Run" menu option in Code::Blocks, but when I tried to launch the compiled application externally through a File Browser (in /media/MyNTFSPartition/MyProject/bin/Release; yes, I saved it in my NTFS partition), the program didn't show up. Why? I ran out of idea. I need to change my Windows and Microsoft Visual Studio mindset to Linux and Code::Blocks mindset. So I came up with these questions: How can I execute my compiled linux programs externally (outside IDE)? In Windows, I simply run the generated executable (.exe) file How can I distribute my linux application? In Windows, I simply distribute the executable files with the corresponding DLL files (if any) What is the equivalent of LIBs (static library) and DLLs (dynamic library) in linux and how to use them? In Windows/Visual Studio, I simply add the required libraries to the Additional Dependencies in the Project Settings, and my program will automatically link with the required static library(-ies)/DLLs. Is it possible to use the "binary form" of a C++ library (if provided) so that I wouldn't need to recompile the entire library source code? In Windows, yes. Sometimes precompiled *.lib files are provided. If I want to create a wxWidgets application in Linux, which package should I pick for Ubuntu? wxGTK or wxX11? Can I run wxGTK program under X11? In Windows, I use wxMSW, Of course. If question no. 4 is answered possible, are precompiled wxX11/wxGTK library exists out there? Haven't tried deep google search. In Windows, there is a project called "wxPack" (http://wxpack.sourceforge.net/) that saves a lot of my time. Sorry for asking many questions, but I am really confused on these linux development fundamentals. Any kind of help would be appreciated =) Thanks.

    Read the article

  • How much time should it take to find the sum of all prime numbers less than 2 million?

    - by Shahensha
    I was trying to solve this Project Euler Question. I implemented the sieve of euler as a helper class in java. It works pretty well for the small numbers. But when I input 2 million as the limit it doesn't return the answer. I use Netbeans IDE. I waited for a lot many hours once, but it still didn't print the answer. When I stopped running the code, it gave the following result Java Result: 2147483647 BUILD SUCCESSFUL (total time: 2,097 minutes 43 seconds) This answer is incorrect. Even after waiting for so much time, this isn't correct. While the same code returns correct answers for smaller limits. Sieve of euler has a very simple algo given at the botton of this page. My implementation is this: package support; import java.util.ArrayList; import java.util.List; /** * * @author admin */ public class SieveOfEuler { int upperLimit; List<Integer> primeNumbers; public SieveOfEuler(int upperLimit){ this.upperLimit = upperLimit; primeNumbers = new ArrayList<Integer>(); for(int i = 2 ; i <= upperLimit ; i++) primeNumbers.add(i); generatePrimes(); } private void generatePrimes(){ int currentPrimeIndex = 0; int currentPrime = 2; while(currentPrime <= Math.sqrt(upperLimit)){ ArrayList<Integer> toBeRemoved = new ArrayList<Integer>(); for(int i = currentPrimeIndex ; i < primeNumbers.size() ; i++){ int multiplier = primeNumbers.get(i); toBeRemoved.add(currentPrime * multiplier); } for(Integer i : toBeRemoved){ primeNumbers.remove(i); } currentPrimeIndex++; currentPrime = primeNumbers.get(currentPrimeIndex); } } public List getPrimes(){ return primeNumbers; } public void displayPrimes(){ for(double i : primeNumbers) System.out.println(i); } } I am perplexed! My questions is 1) Why is it taking so much time? Is there something wrong in what I am doing? Please suggest ways for improving my coding style, if you find something wrong.

    Read the article

  • SQL Server 2005: Update rows in a specified order (like ORDER BY)?

    - by JMTyler
    I want to update rows of a table in a specific order, like one would expect if including an ORDER BY clause, but SQL Server does not support the ORDER BY clause in UPDATE queries. I have checked out this question which supplied a nice solution, but my query is a bit more complicated than the one specified there. UPDATE TableA AS Parent SET Parent.ColA = Parent.ColA + (SELECT TOP 1 Child.ColA FROM TableA AS Child WHERE Child.ParentColB = Parent.ColB ORDER BY Child.Priority) ORDER BY Parent.Depth DESC; So, what I'm hoping that you'll notice is that a single table (TableA) contains a hierarchy of rows, wherein one row can be the parent or child of any other row. The rows need to be updated in order from the deepest child up to the root parent. This is because TableA.ColA must contain an up-to-date concatenation of its own current value with the values of its children (I realize this query only concats with one child, but that is for the sake of simplicity - the purpose of the example in this question does not necessitate any more verbosity), therefore the query must update from the bottom up. The solution suggested in the question I noted above is as follows: UPDATE messages SET status=10 WHERE ID in (SELECT TOP (10) Id FROM Table WHERE status=0 ORDER BY priority DESC ); The reason that I don't think I can use this solution is because I am referencing column values from the parent table inside my subquery (see WHERE Child.ParentColB = Parent.ColB), and I don't think two sibling subqueries would have access to each others' data. So far I have only determined one way to merge that suggested solution with my current problem, and I don't think it works. UPDATE TableA AS Parent SET Parent.ColA = Parent.ColA + (SELECT TOP 1 Child.ColA FROM TableA AS Child WHERE Child.ParentColB = Parent.ColB ORDER BY Child.Priority) WHERE Parent.Id IN (SELECT Id FROM TableA ORDER BY Parent.Depth DESC); The WHERE..IN subquery will not actually return a subset of the rows, it will just return the full list of IDs in the order that I want. However (I don't know for sure - please tell me if I'm wrong) I think that the WHERE..IN clause will not care about the order of IDs within the parentheses - it will just check the ID of the row it currently wants to update to see if it's in that list (which, they all are) in whatever order it is already trying to update... Which would just be a total waste of cycles, because it wouldn't change anything. So, in conclusion, I have looked around and can't seem to figure out a way to update in a specified order (and included the reason I need to update in that order, because I am sure I would otherwise get the ever-so-useful "why?" answers) and I am now hitting up Stack Overflow to see if any of you gurus out there who know more about SQL than I do (which isn't saying much) know of an efficient way to do this. It's particularly important that I only use a single query to complete this action. A long question, but I wanted to cover my bases and give you guys as much info to feed off of as possible. :) Any thoughts?

    Read the article

  • MATLAB query about for loop, reading in data and plotting

    - by mp7
    Hi there, I am a complete novice at using matlab and am trying to work out if there is a way of optimising my code. Essentially I have data from model outputs and I need to plot them using matlab. In addition I have reference data (with 95% confidence intervals) which I plot on the same graph to get a visual idea on how close the model outputs and reference data is. In terms of the model outputs I have several thousand files (number sequentially) which I open in a loop and plot. The problem/question I have is whether I can preprocess the data and then plot later - to save time. The issue I seem to be having when I try this is that I have a legend which either does not appear or is inaccurate. My code (apolgies if it not elegant): fn= xlsread(['tbobserved' '.xls']); time= fn(:,1); totalreference=fn(:,4); totalreferencelowerci=fn(:,6); totalreferenceupperci=fn(:,7); figure plot(time,totalrefrence,'-', time, totalreferencelowerci,'--', time, totalreferenceupperci,'--'); xlabel('Year'); ylabel('Reference incidence per 100,000 population'); title ('Total'); clickableLegend('Observed reference data', 'Totalreferencelowerci', 'Totalreferenceupperci','Location','BestOutside'); xlim([1910 1970]); hold on start_sim=10000; end_sim=10005; h = zeros (1,1000); for i=start_sim:end_sim %is there any way of doing this earlier to save time? a=int2str(i); incidenceFile =strcat('result_', 'Sim', '_', a, 'I_byCal_total.xls'); est_tot=importdata(incidenceFile, '\t', 1); cal_tot=est_tot.data; magnitude=1; t1=cal_tot(:,1)+1750; totalmodel=cal_tot(:,3)+cal_tot(:,5); h(a)=plot(t1,totalmodel); xlim([1910 1970]); ylim([0 500]); hold all clickableLegend(h(a),a,'Location','BestOutside') end Essentially I was hoping to have a way of reading in the data and then plot later - ie. optimise the code. I hope you might be able to help. Thanks. mp

    Read the article

  • plane bombing problems- help

    - by peiska
    I'm training code problems, and on this one I am having problems to solve it, can you give me some tips how to solve it please. The problem is something like this: Your task is to find the sequence of points on the map that the bomber is expected to travel such that it hits all vital links. A link from A to B is vital when its absence isolates completely A from B. In other words, the only way to go from A to B (or vice versa) is via that link. Notice that if we destroy for example link (d,e), it becomes impossible to go from d to e,m,l or n in any way. A vital link can be hit at any point that lies in its segment (e.g. a hit close to d is as valid as a hit close to e). Of course, only one hit is enough to neutralize a vital link. Moreover, each bomb affects an exact circle of radius R, i.e., every segment that intersects that circle is considered hit. Due to enemy counter-attack, the plane may have to retreat at any moment, so the plane should follow, at each moment, to the closest vital link possible, even if in the end the total distance grows larger. Given all coordinates (the initial position of the plane and the nodes in the map) and the range R, you have to determine the sequence of positions in which the plane has to drop bombs. This sequence should start (takeoff) and finish (landing) at the initial position. Except for the start and finish, all the other positions have to fall exactly in a segment of the map (i.e. it should correspond to a point in a non-hit vital link segment). The coordinate system used will be UTM (Universal Transverse Mercator) northing and easting, which basically corresponds to a Euclidian perspective of the world (X=Easting; Y=Northing). Input Each input file will start with three floating point numbers indicating the X0 and Y0 coordinates of the airport and the range R. The second line contains an integer, N, indicating the number of nodes in the road network graph. Then, the next N (<10000) lines will each contain a pair of floating point numbers indicating the Xi and Yi coordinates (1 No two links will ever cross with each other. Output The program will print the sequence of coordinates (pairs of floating point numbers with exactly one decimal place), each one at a line, in the order that the plane should visit (starting and ending in the airport). Sample input 1 102.3 553.9 0.2 14 342.2 832.5 596.2 638.5 479.7 991.3 720.4 874.8 744.3 1284.1 1294.6 924.2 1467.5 659.6 1802.6 659.6 1686.2 860.7 1548.6 1111.2 1834.4 1054.8 564.4 1442.8 850.1 1460.5 1294.6 1485.1 17 1 2 1 3 2 4 3 4 4 5 4 6 6 7 7 8 8 9 8 10 9 10 10 11 6 11 5 12 5 13 12 13 13 14 Sample output 1 102.3 553.9 720.4 874.8 850.1 1460.5 102.3 553.9

    Read the article

  • How to created filtered reports in WPF?

    - by Michael Goyote
    Creating reports in WPF. I have two related tables. Table A-Customer: CustomerID(PK) Names Phone Number Customer Num Table B-Items: Products Price CustomerID I want to be able to generate a report like this: CustomerA Items Price Item A 10 Item B 10 Item C 10 --------------- Total 30 So this is what I have done: <Window x:Class="ReportViewerWPF.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:rv="clr-namespace:Microsoft.Reporting.WinForms; assembly=Microsoft.ReportViewer.WinForms" Title="Customer Report" Height="300" Width="400"> <Grid> <WindowsFormsHost Name="windowsFormsHost1"> <rv:ReportViewer x:Name="reportViewer1"/> </WindowsFormsHost> </Grid> Then I created a dataset and loaded the two tables, followed by a report wizard (dragged all the available fields and dropped them to the Values pane). The code behind the WPF window is this: public partial class CustomerReport : Window { public CustomerReport() { InitializeComponent(); _reportViewer.Load += ReportViewer_Load; } private bool _isReportViewerLoaded; private void ReportViewer_Load(object sender, EventArgs e) { if (!_isReportViewerLoaded) { Microsoft.Reporting.WinForms.ReportDataSource reportDataSource1 = new Microsoft.Reporting.WinForms.ReportDataSource(); HM2DataSet dataset = new HM2DataSet(); dataset.BeginInit(); reportDataSource1.Name = "DataSet";//This is the dataset name reportDataSource1.Value = dataset.CustomerTable; this.reportViewer1.LocalReport.DataSources.Add(reportDataSource1); this.reportViewer1.LocalReport.ReportPath = "../../Report3.rdlc"; dataset.EndInit(); HM2DataSetTableAdapters.CustomerTableAdapter funcTableAdapter = new HM2DataSetTableAdapters.CustomerTableAdapter(); funcTableAdapter.ClearBeforeFill = true; funcTableAdapter.Fill(dataset.CustomerTable); _reportViewer.RefreshReport(); _isReportViewerLoaded = true; } } As you might have guessed this loaded this list of customer with items and price: Customer Items Price Customer A Items A 10 Customer A Items B 10 Customer B Items D 10 Customer B Items C 10 How can I fine-tune this report to look like the one above, where the user can filter the customer he wants displayed on the report? Thanks in advance for the help. I would have preferred to use LINQ whenever filtering data

    Read the article

  • php connecting to mysql server(localhost) very slow

    - by Ahmad
    actually its little complicated: summary: the connection to DB is very slow. the page rendering takes around 10 seconds but the last statement on the page is an echo and i can see its output while the page is loading in firefox (IE is same). in google chrome the output becomes visible only when the loading finishes. loading time is approximately the same across browsers. on debugging i found out that its the DB connectivity that is creating problem. the DB was on another machine. to debug further. i deployed the DB on my local machine .. so now the DB connection is at 127.0.0.1 but the connectivity still takes long time. this means that the issue is with APACHE/PHP and not with mysql. but then i deployed my code on another machine which connects to DB remotely.and everything seems fine. basically the application uses couple of mod_rewrite.. but i removed all the .htaccess files and the slow connectivity issue remains.. i installed another APACHE on my machine and used default settings. the connection was still very slow. i added following statements to measure the execution time $stime = microtime(); $stime = explode(" ",$stime); $stime = $stime[1] + $stime[0]; // my code -- it involves connection to DB $mtime = microtime(); $mtime = explode(" ",$mtime); $mtime = $mtime[1] + $mtime[0]; $totaltime = ($mtime - $stime); echo $totaltime; the output is 0.0631899833679 but firebug Net panel shows total loading time of 10-11 seconds. same is the case with google chrome i tried to turn off windows firewall.. connectivity is still slow and i just can't quite find the reason.. i've tried multiple DB servers.. multiple apaches.. nothing seems to be working.. any idea of what might be the problem?

    Read the article

  • How can i put my form value in javascript array

    - by Lucas van den Abbeele
    I want to make a script where i can put my form in the javascript array invoer[] and display the total It constantly stops working and i searched a lot, i really can't find the right way :D This is my javascript code var strijk = ['broek', 'hemd', 'tshirt', 'lakens', 'korte broek', 'babykledij']; var minuten = [5, 10, 5, 6, 3, 3]; function invoerstrijk() { document.write("<form action='' method='get' name='strijkform'>"); for (var a = 0; a < minuten.length; a++) { document.write(strijk[a] + "<input id='" + strijk[a] + "' name ='" + strijk[a] + "' type='text' />" + "<BR>"); } document.write("<button onclick='opgeven()'>opgeven</button>"); document.write("</form>"); } function opgeven() { var invoer = []; for (var a = 0; a < minuten.length; a++) { invoer[a] = document.getElementByI(strijk[a]).value; } var totaal; for (var a = 0; a < minuten.length; a++) { totaal += parseint(invoer[a]) * parseint(minuten[a]); } document.write("<input name=" + strijk[a] + " type='text' value=" + invoer[a] + " readonly />"); if (invoer != []) { document.write("totaal aantal minuten" + totaal); } else { document.write("geen invoer"); } } my html looks likes this <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> <script type="text/javascript" > //my javasccript </script> <button id="B1" onclick="invoerstrijk()" >Nieuwe strijk</button> </body> </html>

    Read the article

  • Why did File::Find finish short of completely traversing a large directory?

    - by Stan
    A directory exists with a total of 2,153,425 items (according to Windows folder Properties). It contains .jpg and .gif image files located within a few subdirectories. The task was to move the images into a different location while querying each file's name to retrieve some relevant info and store it elsewhere. The script that used File::Find finished at 20462 files. Out of curiosity I wrote a tiny recursive function to count the items which returned a count of 1,734,802. I suppose the difference can be accounted for by the fact that it didn't count folders, only files that passed the -f test. The problem itself can be solved differently by querying for file names first instead of traversing the directory. I'm just wondering what could've caused File::Find to finish at a small fraction of all files. The data is stored on an NTFS file system. Here is the meat of the script; I don't think including DBI stuff would be relevant since I reran the script with nothing but a counter in process_img() which returned the same number. find(\&process_img, $path_from); sub process_img { eval { return if ($_ eq "." or $_ eq ".."); ## Omitted querying and composing new paths for brevity. make_path("$path_to\\img\\$dir_area\\$dir_address\\$type"); copy($File::Find::name, "$path_to\\img\\$dir_area\\$dir_address\\$type\\$new_name"); }; if ($@) { print STDERR "eval barks: $@\n"; return } } And here is another method I used to count files: count_images($path_from); sub count_images { my $path = shift; opendir my $images, $path or die "died opening $path"; while (my $item = readdir $images) { next if $item eq '.' or $item eq '..'; $img_counter++ && next if -f "$path/$item"; count_images("$path/$item") if -d "$path/$item"; } closedir $images or die "died closing $path"; } print $img_counter;

    Read the article

  • ANSI C as core of a C# project? Is this possible?

    - by Nektarios
    I'm writing a NON-GUI app which I want to be cross platform between OS X and Windows. I'm looking at the following architecture, but I don't know if it will work on the windows side: (Platform specific entry point) - ANSI C main loop = ANSI C model code doing data processing / logic = (Platform specific helpers) So the core stuff I'm planning to write in regular ANSI C, because A) it should be platform independent, B) I'm extremely comfortable with C, C) It can do the job and do it well (Platform specific entry point) can be written in whatever necessary to get the job done, this is a small amount of code, doesn't matter to me. (Platform specific helpers) is the sticky thing. This is stuff like parsing XML, accessing databases, graphics toolkit stuff, whatever. Things that aren't easy in C. Things that modern languages/frameworks will give for free. On OS X this code will be written in Objective-C interfacing with Cocoa. On Windows I'm thinking my best bet is to use C# So on Windows my architecture (simplified) looks like (C# or C?) - ANSI C - C# Is this possible? Some thoughts/suggestions so far.. 1) Compile my C core as a .dll -- this is fine, but seems there's no way to call my C# helpers unless I can somehow get function pointers and pass them to my core, but that seems unlikely 2) Compile a C .exe and a C# .exe and have them talk via shared memory or some kind of IPC. I'm not entirely opposed to this but it obviously introduces a lot of complexity so it doesn't seem ideal 3) Instead of C# use C++, it gets me some nice data management stuff and nice helper code. And I can mix it pretty easily. And the work I do could probably easily port to Linux. But I really don't like C++, and I don't want this to turn in to a 3rd-party-library-fest. Not that it's a huge deal, but it's 2010.. anything for basic data management should be built in. And targetting Linux is really not a priority. Note that no "total" alternatives are OK as suggested in other similar questions on SO I've seen; java, RealBasic, mono.. this is an extremely performance intensive application doing soft realtime for game/simulation purposes, I need C & friends here to do it right (maybe you don't, but I do)

    Read the article

  • random quote generator with php, ajax and mysql

    - by fusion
    i've tried using this code and this to make a random quote generator, but it doesn't display anything. my questions are: what is wrong with my code? in the above tut, the quote is generated on a button click, i'd like a random quote to be displayed every 30 mins automatically. how do i do this? //////////////////////// quote.html: <!DOCTYPE html> <script src="ajax.js" type="text/javascript"></script> <body> <!–create the div for the quotes land–> <div id="quote"><strong>this</strong></div> <div><a style="cursor:pointer" onclick="run_query();">Next quote …</a></div> </body> </html> ///////////////////// quote.php: <?php include 'config.php'; // 'text' is the name of your table that contains // the information you want to pull from $rowcount = mysql_query("select count(*) as rows from quotes"); // Gets the total number of items pulled from database. while ($row = mysql_fetch_assoc($rowcount)) { $max = $row["rows"]; } // Selects an item's index at random $rand = rand(1,$max)-1; $result = mysql_query("select * from quotes limit $rand, 1"); $row = mysql_fetch_array($result); $randomOutput = $row['storedText']; echo '<p>' . $randomOutput . '</p>'; //////////// ajax.js: var xmlHttp function run_query() { xmlHttp=GetXmlHttpObject(); if (xmlHttp==null) { alert ("This browser does not support HTTP Request"); return; } // end if var url="quote.php"; xmlHttp.onreadystatechange=stateChanged; xmlHttp.open("GET",url,true); xmlHttp.send(null); } //end function function stateChanged(){ if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete"){ document.getElementById("quote").innerHTML=xmlHttp.responseText; } //end if } //end function function GetXmlHttpObject() { var xmlHttp=null; try { // For these browsers: Firefox, Opera 8.0+, Safari xmlHttp=new XMLHttpRequest(); }catch (e){ //For Internet Explorer try{ xmlHttp=new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { xmlHttp=new ActiveXObject("Microsoft.XMLHTTP"); } } return xmlHttp; } //end function

    Read the article

  • how to set footer image in this video screen?

    - by bala
    hi my problem is how to create footer image in this video screen while playing.... how to create this format. now i am give my description: • 1) Header image, a stretched background image. The location of this external image comes from the application xml; • 2) Footer image, a stretched background image. The location of this external image comes from the application xml; 2.a) the copyright, disclaimer and buy block, this block contains links to popup windows that contain a copyright and or disclaimer. And an option to buy the application for the advertisement less version. The content of this block is fed trough the application XML feed. The color of the text is fed by the application xml plus the popup links and texts itself; • 3) Carousel image, a stretched background image. The location of this external image comes from the application xml; 3.a) the carousel contains objects that can flow from right to left, possibly trough a animation (a soft break of the slide). The first object is centered in the middle of the carousel. This is the first element in the video feed. All the subsequent video object are added to the right of the centered object; 4) Total Video object, this object links to window two with the corresponding video of this object. This object is visually build out of the following sub parts:o 4.a) Thumb object (possible playing video thumb); 4.b) Reflection of the Thumb; 4.c) Textual Explanation of Thumb. 1) Video stream, this is the video stream coming from a external server streamed to the television (maybe up scaled) as 720p stream; 2) Advertisement, the type of advertisement shown overlaid on the video is based on previous settings in the video feed. This could mean that Admob, Adsense or a third party image plus URL could be shown. When the advertisement is selected trough navigation (it will highlight in a different color as a border around the advertisement. The color an thickness can be managed trough the application xml), when clicked a browser will open with the associated site (the application will be pushed to the background process, when the user is finished it will return to the app); 3) A back button, an image and navigational element. The location of the image comes from the application xml. The button is only shown when a cursor is moved (a button is pressed on the remote) it will highlight when selected and when pressed will forward the screen to the main window. When the main window is opened the video will be removed from cache and memory and cannot be start from the point it was exited. please give me your idea....

    Read the article

  • Realtime MySQL search results on an advanced search page

    - by Andrew Heath
    I'm a hobbyist, and started learning PHP last September solely to build a hobby website that I had always wished and dreamed another more competent person might make. I enjoy programming, but I have little free time and enjoy a wide range of other interests and activities. I feel learning PHP alone can probably allow me to create 98% of the desired features for my site, but that last 2% is awfully appealing: The most powerful tool of the site is an advanced search page that picks through a 1000+ record game scenario database. Users can data-mine to tremendous depths - this advanced page has upwards of 50 different potential variables. It's designed to allow the hardcore user to search on almost any possible combination of data in our database and it works well. Those who aren't interested in wading through the sea of options may use the Basic Search, which is comprised of the most popular parts of the Advanced search. Because the advanced search is so comprehensive, and because the database is rather small (less than 1,200 potential hits maximum), with each variable you choose to include the likelihood of getting any qualifying results at all drops dramatically. In my fantasy land where I can wield AJAX as if it were Excalibur, my users would have a realtime Total Results counter in the corner of their screen as they used this page, which would automatically update its query structure and report how many results will be displayed with the addition of each variable. In this way it would be effortless to know just how many variables are enough, and when you've gone and added one that zeroes out the results set. A somewhat similar implementation, at least visually, would be the Subtotal sidebar when building a new custom computer on IBuyPower.com For those of you actually still reading this, my question is really rather simple: Given the time & ability constraints outlined above, would I be able to learn just enough AJAX (or whatever) needed to pull this one feature off without too much trouble? would I be able to more or less drop-in a pre-written code snippet and tweak to fit? or should I consider opening my code up to a trusted & capable individual in the future for this implementation? (assuming I can find one...) Thank you.

    Read the article

  • Jquery help : How to implement a Previous/Next & Play/Pause toggle for this script

    - by rameshelamathi
    (function($){ // Creating the sweetPages jQuery plugin: $.fn.sweetPages = function(opts){ // If no options were passed, create an empty opts object if(!opts) opts = {}; var resultsPerPage = opts.perPage || 3; var swDiv = opts.getSwDiv || "swControls"; // The plugin works best for unordered lists, althugh ols would do just as well: var ul = this; var li = ul.find('li'); li.each(function(){ // Calculating the height of each li element, and storing it with the data method: var el = $(this); el.data('height',el.outerHeight(true)); }); // Calculating the total number of pages: var pagesNumber = Math.ceil(li.length/resultsPerPage); // If the pages are less than two, do nothing: if(pagesNumber<2) return this; // Creating the controls div: //var swControls = $('<div class="swControls">'); var swControls = $('<div class='+swDiv+'>'); for(var i=0;i<pagesNumber;i++) { // Slice a portion of the lis, and wrap it in a swPage div: li.slice(i*resultsPerPage,(i+1)*resultsPerPage).wrapAll('<div class="swPage" />'); // Adding a link to the swControls div: swControls.append('<a href="" class="swShowPage">'+(i+1)+'</a>'); } ul.append(swControls); var maxHeight = 0; var totalWidth = 0; var swPage = ul.find('.swPage'); swPage.each(function(){ // Looping through all the newly created pages: var elem = $(this); var tmpHeight = 0; elem.find('li').each(function(){tmpHeight+=$(this).data('height');}); if(tmpHeight>maxHeight) maxHeight = tmpHeight; totalWidth+=elem.outerWidth(); elem.css('float','left').width(ul.width()); }); swPage.wrapAll('<div class="swSlider" />'); // Setting the height of the ul to the height of the tallest page: //ul.height(maxHeight); var swSlider = ul.find('.swSlider'); swSlider.append('<div class="clear" />').width(totalWidth); var hyperLinks = ul.find('a.swShowPage'); hyperLinks.click(function(e){ // If one of the control links is clicked, slide the swSlider div // (which contains all the pages) and mark it as active: $(this).addClass('active').siblings().removeClass('active'); swSlider.stop().animate({'margin-left':-(parseInt($(this).text())-1)*ul.width()},'slow'); e.preventDefault(); }); // Mark the first link as active the first time this code runs: hyperLinks.eq(0).addClass('active'); // Center the control div: swControls.css({ 'right':'10%', 'margin-left':-swControls.width()/2 }); return this; }})(jQuery);

    Read the article

  • Random generates same number in java

    - by user1613360
    This is my java code. import java.io.*; import java.util.*; import java.util.concurrent.TimeUnit; class search { private int numelem; private int[] input=new int[100]; public void setNumofelem() { System.out.println("Enter the total numebr of elements"); Scanner yz=new Scanner(System.in); numelem=yz.nextInt(); } public void randomnumber() throws Exception { int max=500,min=1,n=numelem; Random rand = new Random(); for (int j=0;j < n;j++) { input[j]=rand.nextInt(max)+1; } } public void printinput() { int b=numelem,t=0; while(true) if(b!=0) { System.out.print(" "+input[t]); b--; t++; } else break; } } public class mycode { public static void main(String args[]) throws Exception { search a=new search(); a.setNumofelem(); a.randomnumber(); a.printinput(); } } Now the function randomnumber() just returns the same number.The function executes perfectly if I execute it as a separate java program but fails miserably if I call it using an object.I have also tried the following variations but nothing works everything return the same number. Variation 1: public void randomnumber() throws Exception { int max=500,min=1,n=numelem; Random rand = new Random(); for (int j=0;j < n;j++) { TimeUnit.SECONDS.sleep(1); input[j]=rand.nextInt(max)+1; } } Variation 2: public void randomnumber() throws Exception { int max=500,min=1,n=numelem; Random rand = new Random(); for (int j=0;j < n;j++) { rand.setSeed(System.nanoTime()); input[j]=rand.nextInt(max)+1; } } Variation 3: public void randomnumber() throws Exception { int max=500,min=1,n=numelem; Random rand = new Random(); for (int j=0;j < n;j++) { TimeUnit.SECONDS.sleep(1); rand.setSeed(System.nanoTime()); input[j]=rand.nextInt(max)+1; } } Sample input/Output: Enter the number of elements: 5 23 23 23 23 23 23

    Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >