final - Page 222 - Developer IT

Is multithreading the right way to go for my case?

- by Julien Lebosquain

Hello, I'm currently designing a multi-client / server application. I'm using plain good old sockets because WCF or similar technology is not what I need. Let me explain: it isn't the classical case of a client simply calling a service; all clients can 'interact' with each other by sending a packet to the server, which will then do some action, and possible re-dispatch an answer message to one or more clients. Although doable with WCF, the application will get pretty complex with hundreds of different messages. For each connected client, I'm of course using asynchronous methods to send and receive bytes. I've got the messages fully working, everything's fine. Except that for each line of code I'm writing, my head just burns because of multithreading issues. Since there could be around 200 clients connected at the same time, I chose to go the fully multithreaded way: each received message on a socket is immediately processed on the thread pool thread it was received, not on a single consumer thread. Since each client can interact with other clients, and indirectly with shared objects on the server, I must protect almost every object that is mutable. I first went with a ReaderWriterLockSlim for each resource that must be protected, but quickly noticed that there are more writes overall than reads in the server application, and switched to the well-known Monitor to simplify the code. So far, so good. Each resource is protected, I have helper classes that I must use to get a lock and its protected resource, so I can't use an object without getting a lock. Moreover, each client has its own lock that is entered as soon as a packet is received from its socket. It's done to prevent other clients from making changes to the state of this client while it has some messages being processed, which is something that will happen frequently. Now, I don't just need to protect resources from concurrent accesses. I must keep every client in sync with the server for some collections I have. One tricky part that I'm currently struggling with is the following: I have a collection of clients. Each client has its own unique ID. When a client connects, it must receive the IDs of every connected client, and each one of them must be notified of the newcomer's ID. When a client disconnects, every other client must know it so that its ID is no longer valid for them. Every client must always have, at a given time, the same clients collection as the server so that I can assume that everybody knows everybody. This way if I'm sending a message to client #1 telling "Client #2 has done something", I know that it will always be correctly interpreted: Client 1 will never wonder "but who is Client 2 anyway?". My first attempt for handling the connection of a new client (let's call it X) was this pseudo-code (remember that newClient is already locked here): lock (clients) { foreach (var client in clients) { lock (client) { client.Send("newClient with id X has connected"); } } clients.Add(newClient); newClient.Send("the list of other clients"); } Now imagine that in the same time, another client has sent a packet that translates into a message that must be broadcasted to every connected client, the pseudo-code will be something like this (remember that the current client - let's call it Y - is already locked here): lock (clients) { foreach (var client in clients) { lock (client) { client.Send("something"); } } } An obvious deadlock occurs here: on one thread X is locked, the clients lock has been entered, started looping through the clients, and at one moment must get Y's lock... which is already acquired on the second thread, itself waiting for the clients collection lock to be released! This is not the only case like this in the server application. There are other collections which must be kept in sync with the clients, some properties on a client can be changed by another one, etc. I tried other types of locks, lock-free mechanisms and a bunch of other things. Either there were obvious deadlocks when I'm using too much locks for safety, or obvious race conditions otherwise. When I finally find a good middle point between the two, it usually comes with very subtle race conditions / dead locks and other multi-threading issues... my head hurts very quickly since for any single line of code I'm writing I have to review almost the whole application to ensure everything will behave correctly with any number of threads. So here's my final question: how would you resolve this specific case, the general case, and more importantly: aren't I going the wrong way here? I have little problems with the .NET framework, C#, simple concurrency or algorithms in general. Still, I'm lost here. I know I could use only one thread processing the incoming requests and everything will be fine. However, that won't scale well at all with more clients... But I'm thinking more and more to go this simple way. What do you think? Thanks in advance to you, StackOverflow people which have taken the time to read this huge question. I really had to explain the whole context if I want to get some help.

Read the article

incrementing in php

- by Michael Stevens

I have a function that works on other pages but on this particular page its not working 100% the piece of code that is failing to work is: $query = "SELECT * FROM rank_punting JOIN rank_player ON rank_player.full_name=rank_punting.name WHERE active='1' AND class='$class' ORDER BY ABS(`rank_punting`.`rank_final`) ASC"; $rank = 0; $lastpct = 0; $db->setQuery($query); $result = $db->query(); if(mysql_num_rows($result) > 0) { while($row = mysql_fetch_array($result, MYSQL_ASSOC)) { if ($row['rank_final'] > $lastpct) { $rank++; $lastpct = $row['rank_final']; } $name = $row['name']; $s1= $row['s1']; $s2= $row['s2']; $s3= $row['s3']; $s4= $row['s4']; $s5= $row['s5']; $s6= $row['s6']; $s7= $row['s7']; $s8= $row['s8']; $s9= $row['s9']; $c1= $row['c1']; $c2= $row['c2']; $c3= $row['c3']; $c4= $row['c4']; $c5= $row['c5']; $c6= $row['c6']; $v1= $row['v1']; $v2= $row['v2']; $comp= $row['comp_rank_final']; $season= $row['season_rank_final']; $final=$row['rank_final']; $link = "website_url"; $link2 = "<a href=\"http://{$link}\" target='_blank'>{$name}<br>Profile Page</a>"; if ($link = ''){$link2 = "<a href='index.php?option=com_ranking&view=playerprofile&player={$name}' >{$name}<br>Profile Page</a>";} echo '<tr>'; echo " <th scope'row'>{$link2} {$lastpct} </th>"; echo "<td>"; echo 'DEBUG: '; echo $row['rank_final']; echo $lastpct;echo "{$rank}</td>"; echo "<td> Competition</td>"; echo "<td> {$comp}</td>"; echo "<td> {$c1}</td>"; echo "<td> {$c2}</td>"; echo "<td> {$c3}</td>"; echo "<td> {$c4}</td>"; echo "<td> {$c5}</td>"; echo "<td> {$c6}</td>"; echo "<td> {$c7}</td>"; echo "<td> {$c8}</td>"; echo "<td> {$v2}</td>"; echo "</tr>"; echo '<tr>'; echo "<th scope'row'> </th>"; echo "<td> </td>"; echo "<td> Game Film</td>"; echo "<td> {$season}</td>"; echo "<td> {$s1}</td>"; echo "<td> {$s2}</td>"; echo "<td> {$s3}</td>"; echo "<td> {$s4}</td>"; echo "<td> {$s5}</td>"; echo "<td> {$s7}</td>"; echo "<td> {$s8}</td>"; echo "<td> {$s6}</td>"; echo "<td> {$v1}</td>"; echo "</tr>"; } } //---------------- echo '</tbody> </table>'; }

Read the article

No view for id for fragment

- by guillaume

I'm trying to use le lib SlidingMenu in my app but i'm having some problems. I'm getting this error: 11-04 15:50:46.225: E/FragmentManager(21112): No view found for id 0x7f040009 (com.myapp:id/menu_frame) for fragment SampleListFragment{413805f0 #0 id=0x7f040009} BaseActivity.java package com.myapp; import android.support.v4.app.FragmentTransaction; import android.os.Bundle; import android.support.v4.app.ListFragment; import android.view.Menu; import android.view.MenuItem; import com.jeremyfeinstein.slidingmenu.lib.SlidingMenu; import com.jeremyfeinstein.slidingmenu.lib.app.SlidingFragmentActivity; public class BaseActivity extends SlidingFragmentActivity { private int mTitleRes; protected ListFragment mFrag; public BaseActivity(int titleRes) { mTitleRes = titleRes; } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setTitle(mTitleRes); // set the Behind View setBehindContentView(R.layout.menu_frame); if (savedInstanceState == null) { FragmentTransaction t = this.getSupportFragmentManager().beginTransaction(); mFrag = new SampleListFragment(); t.replace(R.id.menu_frame, mFrag); t.commit(); } else { mFrag = (ListFragment) this.getSupportFragmentManager().findFragmentById(R.id.menu_frame); } // customize the SlidingMenu SlidingMenu slidingMenu = getSlidingMenu(); slidingMenu.setMode(SlidingMenu.LEFT); slidingMenu.setTouchModeAbove(SlidingMenu.TOUCHMODE_FULLSCREEN); slidingMenu.setShadowWidthRes(R.dimen.slidingmenu_shadow_width); slidingMenu.setShadowDrawable(R.drawable.slidingmenu_shadow); slidingMenu.setBehindOffsetRes(R.dimen.slidingmenu_offset); slidingMenu.setFadeDegree(0.35f); slidingMenu.setMenu(R.layout.slidingmenu); getActionBar().setDisplayHomeAsUpEnabled(true); } @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { case android.R.id.home: toggle(); return true; } return super.onOptionsItemSelected(item); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.main, menu); return true; } } menu.xml <?xml version="1.0" encoding="utf-8"?> <fragment xmlns:android="http://schemas.android.com/apk/res/android" android:name="com.myapp.SampleListFragment" android:layout_width="match_parent" android:layout_height="match_parent" > </fragment> menu_frame.xml <?xml version="1.0" encoding="utf-8"?> <FrameLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/menu_frame" android:layout_width="match_parent" android:layout_height="match_parent" /> SampleListFragment.java package com.myapp; import android.content.Context; import android.os.Bundle; import android.support.v4.app.ListFragment; import android.view.LayoutInflater; import android.view.View; import android.view.ViewGroup; import android.widget.ArrayAdapter; import android.widget.ImageView; import android.widget.TextView; public class SampleListFragment extends ListFragment { public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { return inflater.inflate(R.layout.list, null); } public void onActivityCreated(Bundle savedInstanceState) { super.onActivityCreated(savedInstanceState); SampleAdapter adapter = new SampleAdapter(getActivity()); for (int i = 0; i < 20; i++) { adapter.add(new SampleItem("Sample List", android.R.drawable.ic_menu_search)); } setListAdapter(adapter); } private class SampleItem { public String tag; public int iconRes; public SampleItem(String tag, int iconRes) { this.tag = tag; this.iconRes = iconRes; } } public class SampleAdapter extends ArrayAdapter<SampleItem> { public SampleAdapter(Context context) { super(context, 0); } public View getView(int position, View convertView, ViewGroup parent) { if (convertView == null) { convertView = LayoutInflater.from(getContext()).inflate(R.layout.row, null); } ImageView icon = (ImageView) convertView.findViewById(R.id.row_icon); icon.setImageResource(getItem(position).iconRes); TextView title = (TextView) convertView.findViewById(R.id.row_title); title.setText(getItem(position).tag); return convertView; } } } MainActivity.java package com.myapp; import java.util.ArrayList; import beans.Tweet; import database.DatabaseHelper; import adapters.TweetListViewAdapter; import android.os.Bundle; import android.widget.ListView; public class MainActivity extends BaseActivity { public MainActivity(){ super(R.string.app_name); } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); final ListView listview = (ListView) findViewById(R.id.listview_tweets); DatabaseHelper db = new DatabaseHelper(this); ArrayList<Tweet> tweets = db.getAllTweets(); TweetListViewAdapter adapter = new TweetListViewAdapter(this, R.layout.listview_item_row, tweets); listview.setAdapter(adapter); setSlidingActionBarEnabled(false); } } I don't understand why the view menu_frame is not found because I have a view with the id menu_frame and this view is a child of the layout menu_frame.

Read the article

Which workaround to use for the following SQL deadlock?

- by Marko

I found a SQL deadlock scenario in my application during concurrency. I belive that the two statements that cause the deadlock are (note - I'm using LINQ2SQL and DataContext.ExecuteCommand(), that's where this.studioId.ToString() comes into play): exec sp_executesql N'INSERT INTO HQ.dbo.SynchronizingRows ([StudioId], [UpdatedRowId]) SELECT @p0, [t0].[Id] FROM [dbo].[UpdatedRows] AS [t0] WHERE NOT (EXISTS( SELECT NULL AS [EMPTY] FROM [dbo].[ReceivedUpdatedRows] AS [t1] WHERE ([t1].[StudioId] = @p0) AND ([t1].[UpdatedRowId] = [t0].[Id]) ))',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; and exec sp_executesql N'INSERT INTO HQ.dbo.ReceivedUpdatedRows ([UpdatedRowId], [StudioId], [ReceiveDateTime]) SELECT [t0].[UpdatedRowId], @p0, GETDATE() FROM [dbo].[SynchronizingRows] AS [t0] WHERE ([t0].[StudioId] = @p0)',N'@p0 uniqueidentifier',@p0='" + this.studioId.ToString() + "'; The basic logic of my (client-server) application is this: Every time someone inserts or updates a row on the server side, I also insert a row into the table UpdatedRows, specifying the RowId of the modified row. When a client tries to synchronize data, it first copies all of the rows in the UpdatedRows table, that don't contain a reference row for the specific client in the table ReceivedUpdatedRows, to the table SynchronizingRows (the first statement taking part in the deadlock). Afterwards, during the synchronization I look for modified rows via lookup of the SynchronizingRows table. This step is required, otherwise if someone inserts new rows or modifies rows on the server side during synchronization I will miss them and won't get them during the next synchronization (explanation scenario to long to write here...). Once synchronization is complete, I insert rows to the ReceivedUpdatedRows table specifying that this client has received the UpdatedRows contained in the SynchronizingRows table (the second statement taking part in the deadlock). Finally I delete all rows from the SynchronizingRows table that belong to the current client. The way I see it, the deadlock is occuring on tables SynchronizingRows (abbreviation SR) and ReceivedUpdatedRows (abbreviation RUR) during steps 2 and 3 (one client is in step 2 and is inserting into SR and selecting from RUR; while another client is in step 3 inserting into RUR and selecting from SR). I googled a bit about SQL deadlocks and came to a conclusion that I have three options. Inorder to make a decision I need more input about each option/workaround: Workaround 1: The first advice given on the web about SQL deadlocks - restructure tables/queries so that deadlocks don't happen in the first place. Only problem with this is that with my IQ I don't see a way to do the synchronization logic any differently. If someone wishes to dwelve deeper into my current synchronization logic, how and why it is set up the way it is, I'll post a link for the explanation. Perhaps, with the help of someone smarter than me, it's possible to create a logic that is deadlock free. Workaround 2: The second most common advice seems to be the use of WITH(NOLOCK) hint. The problem with this is that NOLOCK might miss or duplicate some rows. Duplication is not a problem, but missing rows is catastrophic! Another option is the WITH(READPAST) hint. On the face of it, this seems to be a perfect solution. I really don't care about rows that other clients are inserting/modifying, because each row belongs only to a specific client, so I may very well skip locked rows. But the MSDN documentaion makes me a bit worried - "When READPAST is specified, both row-level and page-level locks are skipped". As I said, row-level locks would not be a problem, but page-level locks may very well be, since a page might contain rows that belong to multiple clients (including the current one). While there are lots of blog posts specifically mentioning that NOLOCK might miss rows, there seems to be none about READPAST (never) missing rows. This makes me skeptical and nervous to implement it, since there is no easy way to test it (implementing would be a piece of cake, just pop WITH(READPAST) into both statements SELECT clause and job done). Can someone confirm whether the READPAST hint can miss rows? Workaround 3: The final option is to use ALLOW_SNAPSHOT_ISOLATION and READ_COMMITED_SNAPSHOT. This would seem to be the only option to work 100% - at least I can't find any information that would contradict with it. But it is a little bit trickier to setup (I don't care much about the performance hit), because I'm using LINQ. Off the top of my head I probably need to manually open a SQL connection and pass it to the LINQ2SQL DataContext, etc... I haven't looked into the specifics very deeply. Mostly I would prefer option 2 if somone could only reassure me that READPAST will never miss rows concerning the current client (as I said before, each client has and only ever deals with it's own set of rows). Otherwise I'll likely have to implement option 3, since option 1 is probably impossible... I'll post the table definitions for the three tables as well, just in case: CREATE TABLE [dbo].[UpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY CLUSTERED, [RowId] [uniqueidentifier] NOT NULL, [UpdateDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE NONCLUSTERED INDEX IX_RowId ON dbo.UpdatedRows ([RowId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[ReceivedUpdatedRows]( [Id] [uniqueidentifier] NOT NULL ROWGUIDCOL DEFAULT NEWSEQUENTIALID() PRIMARY KEY NONCLUSTERED, [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]), [StudioId] [uniqueidentifier] NOT NULL REFERENCES, [ReceiveDateTime] [datetime] NOT NULL, ) ON [PRIMARY] GO CREATE CLUSTERED INDEX IX_Studios ON dbo.ReceivedUpdatedRows ([StudioId] ASC) WITH (STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE TABLE [dbo].[SynchronizingRows]( [StudioId] [uniqueidentifier] NOT NULL [UpdatedRowId] [uniqueidentifier] NOT NULL REFERENCES [dbo].[UpdatedRows] ([Id]) PRIMARY KEY CLUSTERED ([StudioId], [UpdatedRowId]) ) ON [PRIMARY] GO PS! Studio = Client. PS2! I just noticed that the index definitions have ALLOW_PAGE_LOCK=ON. If I would turn it off, would that make any difference to READPAST? Are there any negative downsides for turning it off?

Read the article

IE 8 Automatically Closing <header> tag

- by djthoms

Background I am currently working on the final QA of a responsive website and I'm having an issue with IE 8 and IE 7. My client deals with government contracting so their website needs to be compatible with IE 8 and IE 7. I am using Modernizr with html5shiv built in. I am loading Modernizr in the footer of a WordPress theme that was custom built for this project. I'm not missing a doctype or any other obvious code. I am using the following scripts, all of which are loaded in the footer of WordPress: jQuery 1.10.1 Modernizr 2.6.3 (click for config) respond.js 1.3.0 superfish jQuery Waypoints 2.0.3 jQuery Waypoints Sticky 2.0.3 The Situation I'm having an issue with IE 8 automatically closing a <header> tag. First, I have used two utilities to check this issue: IETester IE 11 emulated to IE 8 w/ IE 8 User agent Here is the correct output <div class="wrapper main-header"> <header class="container"> <div class="sixteen columns alpha omega"> <div class="eight columns alpha omega logo"> <a href="http://example.com"><img src="http://example.com/wp-content/uploads/2013/10/logo.png" alt="Example"></a> </div> <div class="wrapper main-navigation desktop"> <nav id="nav" class="six columns alpha omega"> ... </nav> <div class="eight columns alpha omega overlay" style="display: none;"> ... </div> <div class="two columns alpha omega menu-ss"> ... </div> </div> </div> </header> </div> What IE 8 is rendering: <div class="wrapper main-header"> <header class="container"></header> <div class="sixteen columns alpha omega"> <div class="eight columns alpha omega logo"> <a href="http://example.com"><img src="http://example.com/wp-content/uploads/2013/10/logo.png" alt="Example"></a> </div> <div class="wrapper main-navigation desktop"> <nav id="nav" class="six columns alpha omega"> ... </nav> <div class="eight columns alpha omega overlay" style="display: none;"> ... </div> <div class="two columns alpha omega menu-ss"> ... </div> </div> </div> </header><//header> </div> What I have Tried Loading html5shiv with IE conditional in the <head> Loading Modernizr in the <head> I have looked at these Stackoverflow questions/answers: html 5 tags foorter or header in ie 8 and ie 7 html5 not rendering header tags in ie IE 8 self closing tags automatically Any assistance with this is greatly appreciated! I would really really really like to finish this website over the weekend. I've been banging my head against a wall for the past few hours over this issue. Update Here are some images from browsershack to cut out the emulation. I tested the site virtually with Windows 7 and WIndows XP (IE 8 & IE 7). http://www.browserstack.com/screenshots/0d7c1d6dd22927c20495e67f07afe8934957b4d1

Read the article

How to obtain listview information without refreshing the page?

- by user1808098

I am currently developing an Android Application for my Final Year Project. But to be honest I do not have any basic knowledges and everything started from scratch and referring to online tutorials a lot. Here is my question, I was trying to retrieve data from listview activity. There are two listview in my page using button. I was able to display the first listview but when it get data for the second listview, the data for first listview is disappeared because the page is refreshed, vice versa. What code should I modified to get both the data in the page? (Database not implemented yet) Please help, thanks a lot. Below are my codings. Codings for XML.  <TextView android:id="@+id/TextViewLocation" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:layout_marginBottom="10dip" android:text="Location Information" android:gravity="center" android:textSize="15dip" android:textColor="#025f7c"/>  <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textColor="#372c24" android:text="Traffic Condition"/> <Button android:id="@+id/inputListView" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:layout_marginBottom="10dip" android:text="choose one..."/>  <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textColor="#372c24" android:text="What's Happening?"/> <Button android:id="@+id/inputListView2" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:layout_marginBottom="10dip" android:text="choose one..."/>  <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textColor="#372c24" android:text="Comments / Suggestion"/> <EditText android:layout_width="fill_parent" android:layout_height="80dp" android:layout_marginTop="5dip" android:layout_marginBottom="10dip" android:singleLine="true"/>  <Button android:id="@+id/btnImage" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:text="Upload Image"/>  <Button android:id="@+id/btnReportCheckin" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:text="Report"/>  <TextView android:id="@+id/linkLogout" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_marginTop="5dip" android:layout_marginBottom="40dip" android:text="Log Out" android:gravity="center" android:textSize="20dip" android:textColor="#025f7c"/> </LinearLayout>  Codings for Activity Class public class CheckinActivity extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Set View to checkin.xml setContentView(R.layout.checkin); /* TextView LocationView = (TextView) findViewById(R.id.TextViewLocation); Intent h = getIntent(); // getting attached intent data String address = h.getStringExtra("address"); // displaying selected product name LocationView.setText(address); */ Button ListViewScreen = (Button) findViewById(R.id.inputListView); //Listening to Button ListViewScreen.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { //Switching to ListView Screen Intent i = new Intent(getApplicationContext(), ListViewActivity.class); startActivity(i); } } ); Button SelectedView = (Button) findViewById(R.id.inputListView); Intent i = getIntent(); // getting attached intent data String product = i.getStringExtra("product"); // displaying selected product name SelectedView.setText(product); Button ListView2Screen = (Button) findViewById(R.id.inputListView2); //Listening to Button ListView2Screen.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { //Switching to ListView Screen Intent j = new Intent(getApplicationContext(), ListView2Activity.class); startActivity(j); } } ); Button SelectedView2 = (Button) findViewById(R.id.inputListView2); Intent j = getIntent(); // getting attached intent data String product2 = j.getStringExtra("product2"); // displaying selected product name SelectedView2.setText(product2); TextView Logout = (TextView) findViewById(R.id.linkLogout); // Listening to Log out Logout.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { // Closing menu screen // Switching to Login Screen/closing register screen finish(); } }); } } Coding for listview class public class ListViewActivity extends ListActivity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // storing string resources into Array String[] traffic_condition = getResources().getStringArray(R.array.traffic_condition); // Binding resources Array to ListAdapter this.setListAdapter(new ArrayAdapter<String>(this, R.layout.listitem, R.id.listViewLayout, traffic_condition)); ListView lv = getListView(); // listening to single list item on click lv.setOnItemClickListener(new OnItemClickListener() { public void onItemClick(AdapterView<?> parent, View view, int position, long id) { // selected item String product = ((TextView) view).getText().toString(); // Launching new Activity on selecting single List Item Intent i = new Intent(getApplicationContext(), CheckinActivity.class); // sending data to new activity i.putExtra("product", product); startActivity(i); } }); } } Hope I made myself clear, I can provide a screen shot of my apps if it is required, thanks!

Read the article

Many-to-one relation exception due to closed session after loading

- by Nick Thissen

Hi, I am using NHibernate (version 1.2.1) for the first time so I wrote a simple test application (an ASP.NET project) that uses it. In my database I have two tables: Persons and Categories. Each person gets one category, seems easy enough. | Persons | | Categories | |--------------| |--------------| | Id (PK) | | Id (PK) | | Firstname | | CategoryName | | Lastname | | CreatedTime | | CategoryId | | UpdatedTime | | CreatedTime | | Deleted | | UpdatedTime | | Deleted | The Id, CreatedTime, UpdatedTime and Deleted attributes are a convention I use in all my tables, so I have tried to bring this fact into an additional abstraction layer. I have a project DatabaseFramework which has three important classes: Entity: an abstract class that defines these four properties. All 'entity objects' (in this case Person and Category) must inherit Entity. IEntityManager: a generic interface (type parameter as Entity) that defines methods like Load, Insert, Update, etc. NHibernateEntityManager: an implementation of this interface using NHibernate to do the loading, saving, etc. Now, the Person and Category classes are straightforward, they just define the attributes of the tables of course (keeping in mind that four of them are in the base Entity class). Since the Persons table is related to the Categories table via the CategoryId attribute, the Person class has a Category property that holds the related category. However, in my webpage, I will also need the name of this category (CategoryName), for databinding purposes for example. So I created an additional property CategoryName that returns the CategoryName property of the current Category property, or an empty string if the Category is null: Namespace Database Public Class Person Inherits DatabaseFramework.Entity Public Overridable Property Firstname As String Public Overridable Property Lastname As String Public Overridable Property Category As Category Public Overridable ReadOnly Property CategoryName As String Get Return If(Me.Category Is Nothing, _ String.Empty, _ Me.Category.CategoryName) End Get End Property End Class End Namespace I am mapping the Person class using this mapping file. The many-to-one relation was suggested by Yads in another thread: <id name="Id" column="Id" type="int" unsaved-value="0"> <generator class="identity" /> </id> <property name="CreatedTime" type="DateTime" not-null="true" /> <property name="UpdatedTime" type="DateTime" not-null="true" /> <property name="Deleted" type="Boolean" not-null="true" /> <property name="Firstname" type="String" /> <property name="Lastname" type="String" /> <many-to-one name="Category" column="CategoryId" class="NHibernateWebTest.Database.Category, NHibernateWebTest" /> (I can't get it to show the root node, this forum hides it, I don't know how to escape the html-like tags...) The final important detail is the Load method of the NHibernateEntityManager implementation. (This is in C# as it's in a different project, sorry about that). I simply open a new ISession (ISessionFactory.OpenSession) in the GetSession method and then use that to fill an EntityCollection(Of TEntity) which is just a collection inheriting System.Collections.ObjectModel.Collection(Of T). public virtual EntityCollection< TEntity Load() { using (ISession session = this.GetSession()) { var entities = session .CreateCriteria(typeof (TEntity)) .Add(Expression.Eq("Deleted", false)) .List< TEntity (); return new EntityCollection< TEntity (entities); } } (Again, I can't get it to format the code correctly, it hides the generic type parameters, probably because it reads the angled symbols as a HTML tag..? If you know how to let me do that, let me know!) Now, the idea of this Load method is that I get a fully functional collection of Persons, all their properties set to the correct values (including the Category property, and thus, the CategoryName property should return the correct name). However, it seems that is not the case. When I try to data-bind the result of this Load method to a GridView in ASP.NET, it tells me this: Property accessor 'CategoryName' on object 'NHibernateWebTest.Database.Person' threw the following exception:'Could not initialize proxy - the owning Session was closed.' The exception occurs on the DataBind method call here: public virtual void LoadGrid() { if (this.Grid == null) return; this.Grid.DataSource = this.Manager.Load(); this.Grid.DataBind(); } Well, of course the session is closed, I closed it via the using block. Isn't that the correct approach, should I keep the session open? And for how long? Can I close it after the DataBind method has been run? In each case, I'd really like my Load method to just return a functional collection of items. It seems to me that it is now only getting the Category when it is required (eg, when the GridView wants to read the CategoryName, which wants to read the Category property), but at that time the session is closed. Is that reasoning correct? How do I stop this behavior? Or shouldn't I? And what should I do otherwise? Thanks!

Read the article

No Hibernate Session bound to thread exception

- by Benchik

I have Hibernate 3.6.0.Final and Spring 3.0.0.RELEASE I get "No Hibernate Session bound to thread, and configuration does not allow creation of non-transactional one here" If I add the thread specification back in, I get "saveOrUpdate is not valid without active transaction" Any ideas? The spring-config.xml: <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close"> <property name="driverClassName" value="org.hsqldb.jdbcDriver"/> <property name="url" value="jdbc:hsqldb:mem:jsf2demo"/> <property name="username" value="sa"/> <property name="password" value=""/> </bean> <bean id="sampleSessionFactory" class="org.springframework.orm.hibernate3.annotation.AnnotationSessionFactoryBean"> <property name="dataSource" ref="sampleDataSource"/> <property name="annotatedClasses"> <list> <value>com.maxheapsize.jsf2demo.Book</value> </list> </property> <property name="hibernateProperties"> <props>  <prop key="hibernate.show_sql">true</prop> <prop key="hibernate.dialect">org.hibernate.dialect.HSQLDialect</prop>  <prop key="hibernate.hbm2ddl.auto">create</prop> </props> </property> </bean> <bean id="sampleDataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName"> <value>org.hsqldb.jdbcDriver</value> </property> <property name="url"> <value> jdbc:hsqldb:file:/spring/db/springdb;SHUTDOWN=true </value> </property> <property name="username" value="sa"/> <property name="password" value=""/> </bean> <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sampleSessionFactory"/> </bean> <bean id="daoTxTemplate" abstract="true" class="org.springframework.transaction.interceptor.TransactionProxyFactoryBean"> <property name="transactionManager" ref="transactionManager"/> <property name="transactionAttributes"> <props> <prop key="create*"> PROPAGATION_REQUIRED,ISOLATION_READ_COMMITTED </prop> <prop key="get*"> PROPAGATION_REQUIRED,ISOLATION_READ_COMMITTED </prop> </props> </property> </bean> <bean name="openSessionInViewInterceptor" class="org.springframework.orm.hibernate3.support.OpenSessionInViewInterceptor"> <property name="sessionFactory" ref="sampleSessionFactory"/> <property name="singleSession" value="true"/> </bean> <bean id="nameDao" parent="daoTxTemplate"> <property name="target"> <bean class="com.maxheapsize.dao.NameDao"> <property name="sessionFactory" ref="sampleSessionFactory"/> </bean> </property> </bean> and the DAO: public class NameDao { private SessionFactory sessionFactory; public void setSessionFactory(SessionFactory sessionFactory) { this.sessionFactory = sessionFactory; } public SessionFactory getSessionFactory() { return sessionFactory; } @Transactional @SuppressWarnings("unchecked") public List<Name> getAll() { Session session = this.sessionFactory.getCurrentSession(); List<Name> names = (List<Name>)session.createQuery("from Name").list(); return names; } //@Transactional(propagation= Propagation.REQUIRED, readOnly=false) @Transactional public void save(Name name){ Session session = this.sessionFactory.getCurrentSession(); session.saveOrUpdate(name); session.flush(); } }

Read the article

Developed android application cannot connect to phpmyadmin

- by user1850936

I am developing an app with eclipse. I tried to store the data that key in by user into database in phpmyadmin. Unfortunately, after the user has clicked on submit button, there is no response and data is not stored in my database. Here is my java file: import java.util.ArrayList; import java.util.List; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONObject; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.Bundle; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.EditText; import android.widget.RadioButton; import android.content.res.Configuration; public class UserRegister extends Activity { JSONParser jsonParser = new JSONParser(); EditText inputName; EditText inputUsername; EditText inputEmail; EditText inputPassword; RadioButton button1; RadioButton button2; Button button3; int success = 0; private static String url_register_user = "http://10.20.92.81/database/add_user.php"; private static final String TAG_SUCCESS = "success"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_user_register); inputName = (EditText) findViewById(R.id.nameTextBox); inputUsername = (EditText) findViewById(R.id.usernameTextBox); inputEmail = (EditText) findViewById(R.id.emailTextBox); inputPassword = (EditText) findViewById(R.id.pwTextBox); Button button3 = (Button) findViewById(R.id.regSubmitButton); button3.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); if (name.contentEquals("")||username.contentEquals("")||email.contentEquals("")||password.contentEquals("")) { AlertDialog.Builder builder = new AlertDialog.Builder(UserRegister.this); builder.setMessage(R.string.nullAlert) .setTitle(R.string.alertTitle); builder.setPositiveButton(R.string.ok, new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { } }); AlertDialog dialog = builder.show(); } // creating new product in background thread RegisterNewUser(); } }); } public void RegisterNewUser() { try { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("username", username)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object // Note that create product url accepts POST method JSONObject json = jsonParser.makeHttpRequest(url_register_user, "GET", params); // check log cat for response Log.d("Send Notification", json.toString()); success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully created product Intent i = new Intent(getApplicationContext(), StudentLogin.class); startActivity(i); finish(); } else { // failed to register } } catch (Exception e) { e.printStackTrace(); } } @Override public void onConfigurationChanged(Configuration newConfig) { super.onConfigurationChanged(newConfig); } } my php file: <?php $response = array(); require_once __DIR__ . '/db_connect.php'; $db = new DB_CONNECT(); if (isset($_GET['name']) && isset($_GET['username']) && isset($_GET['email']) && isset($_GET['password'])) { $name = $_GET['name']; $username = $_GET['username']; $email = $_GET['email']; $password = $_GET['password']; // mysql inserting a new row $result = mysql_query("INSERT INTO register(name, username, email, password) VALUES('$name', '$username', '$email', '$password')"); // check if row inserted or not if ($result) { // successfully inserted into database $response["success"] = 1; $response["message"] = "You are successfully registered to MEMS."; // echoing JSON response echo json_encode($response); } else { // failed to insert row $response["success"] = 0; $response["message"] = "Oops! An error occurred."; // echoing JSON response echo json_encode($response); } } else { // required field is missing $response["success"] = 0; $response["message"] = "Required field(s) is missing"; // echoing JSON response echo json_encode($response); } ?> the log cat is as follows: 11-25 10:37:46.772: I/Choreographer(638): Skipped 30 frames! The application may be doing too much work on its main thread.

Read the article

How should I implement simple caches with concurrency on Redis?

- by solublefish

Background I have a 2-tier web service - just my app server and an RDBMS. I want to move to a pool of identical app servers behind a load balancer. I currently cache a bunch of objects in-process. I hope to move them to a shared Redis. I have a dozen or so caches of simple, small-sized business objects. For example, I have a set of Foos. Each Foo has a unique FooId and an OwnerId. One "owner" may own multiple Foos. In a traditional RDBMS this is just a table with an index on the PK FooId and one on OwnerId. I'm caching this in one process simply: Dictionary<int,Foo> _cacheFooById; Dictionary<int,HashSet<int>> _indexFooIdsByOwnerId; Reads come straight from here, and writes go here and to the RDBMS. I usually have this invariant: "For a given group [say by OwnerId], the whole group is in cache or none of it is." So when I cache miss on a Foo, I pull that Foo and all the owner's other Foos from the RDBMS. Updates make sure to keep the index up to date and respect the invariant. When an owner calls GetMyFoos I never have to worry that some are cached and some aren't. What I did already The first/simplest answer seems to be to use plain ol' SET and GET with a composite key and json value: SET( "ServiceCache:Foo:" + theFoo.Id, JsonSerialize(theFoo)); I later decided I liked: HSET( "ServiceCache:Foo", theFoo.FooId, JsonSerialize(theFoo)); That lets me get all the values in one cache as HVALS. It also felt right - I'm literally moving hashtables to Redis, so perhaps my top-level items should be hashes. This works to first order. If my high-level code is like: UpdateCache(myFoo); AddToIndex(myFoo); That translates into: HSET ("ServiceCache:Foo", theFoo.FooId, JsonSerialize(theFoo)); var myFoos = JsonDeserialize( HGET ("ServiceCache:FooIndex", theFoo.OwnerId) ); myFoos.Add(theFoo.OwnerId); HSET ("ServiceCache:FooIndex", theFoo.OwnerId, JsonSerialize(myFoos)); However, this is broken in two ways. Two concurrent operations can read/modify/write at the same time. The latter "wins" the final HSET and the former's index update is lost. Another operation could read the index in between the first and second lines. It would miss a Foo that it should find. So how do I index properly? I think I could use a Redis set instead of a json-encoded value for the index. That would solve part of the problem since the "add-to-index-if-not-already-present" would be atomic. I also read about using MULTI as a "transaction" but it doesn't seem like it does what I want. Am I right that I can't really MULTI; HGET; {update}; HSET; EXEC since it doesn't even do the HGET before I issue the EXEC? I also read about using WATCH and MULTI for optimistic concurrency, then retrying on failure. But WATCH only works on top-level keys. So it's back to SET/GET instead of HSET/HGET. And now I need a new index-like-thing to support getting all the values in a given cache. If I understand it right, I can combine all these things to do the job. Something like: while(!succeeded) { WATCH( "ServiceCache:Foo:" + theFoo.FooId ); WATCH( "ServiceCache:FooIndexByOwner:" + theFoo.OwnerId ); WATCH( "ServiceCache:FooIndexAll" ); MULTI(); SET ("ServiceCache:Foo:" + theFoo.FooId, JsonSerialize(theFoo)); SADD ("ServiceCache:FooIndexByOwner:" + theFoo.OwnerId, theFoo.FooId); SADD ("ServiceCache:FooIndexAll", theFoo.FooId); EXEC(); //TODO somehow set succeeded properly } Finally I'd have to translate this pseudocode into real code depending how my client library uses WATCH/MULTI/EXEC; it looks like they need some sort of context to hook them together. All in all this seems like a lot of complexity for what has to be a very common case; I can't help but think there's a better, smarter, Redis-ish way to do things that I'm just not seeing. How do I lock properly? Even if I had no indexes, there's still a (probably rare) race condition. A: HGET - cache miss B: HGET - cache miss A: SELECT B: SELECT A: HSET C: HGET - cache hit C: UPDATE C: HSET B: HSET ** this is stale data that's clobbering C's update. Note that C could just be a really-fast A. Again I think WATCH, MULTI, retry would work, but... ick. I know in some places people use special Redis keys as locks for other objects. Is that a reasonable approach here? Should those be top-level keys like ServiceCache:FooLocks:{Id} or ServiceCache:Locks:Foo:{Id}? Or make a separate hash for them - ServiceCache:Locks with subkeys Foo:{Id}, or ServiceCache:Locks:Foo with subkeys {Id} ? How would I work around abandoned locks, say if a transaction (or a whole server) crashes while "holding" the lock?

Read the article

Generating a .CSV with Several Columns - Use a Dictionary?

- by Qanthelas

I am writing a script that looks through my inventory, compares it with a master list of all possible inventory items, and tells me what items I am missing. My goal is a .csv file where the first column contains a unique key integer and then the remaining several columns would have data related to that key. For example, a three row snippet of my end-goal .csv file might look like this: 100001,apple,fruit,medium,12,red 100002,carrot,vegetable,medium,10,orange 100005,radish,vegetable,small,10,red The data for this is being drawn from a couple sources. 1st, a query to an API server gives me a list of keys for items that are in inventory. 2nd, I read in a .csv file into a dict that matches keys with item name for all possible keys. A snippet of the first 5 rows of this .csv file might look like this: 100001,apple 100002,carrot 100003,pear 100004,banana 100005,radish Note how any key in my list of inventory will be found in this two column .csv file that gives all keys and their corresponding item name and this list minus my inventory on hand yields what I'm looking for (which is the inventory I need to get). So far I can get a .csv file that contains just the keys and item names for the items that I don't have in inventory. Give a list of inventory on hand like this: 100003,100004 A snippet of my resulting .csv file looks like this: 100001,apple 100002,carrot 100005,radish This means that I have pear and banana in inventory (so they are not in this .csv file.) To get this I have a function to get an item name when given an item id that looks like this: def getNames(id_to_name, ids): return [id_to_name[id] for id in ids] Then a function which gives a list of keys as integers from my inventory server API call that returns a list and I've run this function like this: invlist = ServerApiCallFunction(AppropriateInfo) A third function takes this invlist as its input and returns a dict of keys (the item id) and names for the items I don't have. It also writes the information of this dict to a .csv file. I am using the set1 - set2 method to do this. It looks like this: def InventoryNumbers(inventory): with open(csvfile,'w') as c: c.write('InvName' + ',InvID' + '\n') missinginvnames = [] with open("KeyAndItemNameTwoColumns.csv","rb") as fp: reader = csv.reader(fp, skipinitialspace=True) fp.readline() # skip header invidsandnames = {int(id): str.upper(name) for id, name in reader} invids = set(invidsandnames.keys()) invnames = set(invidsandnames.values()) invonhandset = set(inventory) missinginvidsset = invids - invonhandset missinginvids = list(missinginvidsset) missinginvnames = getNames(invidsandnames, missinginvids) missinginvnameswithids = dict(zip(missinginvnames, missinginvids)) print missinginvnameswithids with open(csvfile,'a') as c: for invname, invid in missinginvnameswithids.iteritems(): c.write(invname + ',' + str(invid) + '\n') return missinginvnameswithids Which I then call like this: InventoryNumbers(invlist) With that explanation, now on to my question here. I want to expand the data in this output .csv file by adding in additional columns. The data for this would be drawn from another .csv file, a snippet of which would look like this: 100001,fruit,medium,12,red 100002,vegetable,medium,10,orange 100003,fruit,medium,14,green 100004,fruit,medium,12,yellow 100005,vegetable,small,10,red Note how this does not contain the item name (so I have to pull that from a different .csv file that just has the two columns of key and item name) but it does use the same keys. I am looking for a way to bring in this extra information so that my final .csv file will not just tell me the keys (which are item ids) and item names for the items I don't have in stock but it will also have columns for type, size, number, and color. One option I've looked at is the defaultdict piece from collections, but I'm not sure if this is the best way to go about what I want to do. If I did use this method I'm not sure exactly how I'd call it to achieve my desired result. If some other method would be easier I'm certainly willing to try that, too. How can I take my dict of keys and corresponding item names for items that I don't have in inventory and add to it this extra information in such a way that I could output it all to a .csv file? EDIT: As I typed this up it occurred to me that I might make things easier on myself by creating a new single .csv file that would have date in the form key,item name,type,size,number,color (basically just copying in the column for item name into the .csv that already has the other information for each key.) This way I would only need to draw from one .csv file rather than from two. Even if I did this, though, how would I go about making my desired .csv file based on only those keys for items not in inventory?

Read the article

bandwidth throttling C linux

- by bob moch

hi im currently creating a function to create a sleep time i can pause between packets for my port scanner im creating for personal/educational use for my home network. what im currently doing is opening /proc/net/dev and reading the 9th set of digits for the eth0 interface to find out the current packets being set and then reading it again and doing some math to figure out a delay to sleep between sending a packet to a port to identify it and fingerprint it. my problem is that no matter what throttle % i use it always seems to send the same rate of packets. i think its mainly my way of mathematically creating my sleep delay. edit:: dont mind the function declaration and the struct stuff all im doing is spawning this function in a thread and passing a pointer to a struct to the function, recreating the struct locally and then freeing the passed structs memory. void *bandwidthmonitor_cmd(void *param) { char cmdline[1024], *bytedata[19]; int i = 0, ii = 0; long long prevbytes = 0, currentbytes = 0, elapsedbytes = 0, byteusage = 0, maxthrottle = 0; command_struct bandwidth = *((command_struct *)param); free(param); //printf("speed: %d\n throttle: %d\n\n", UPLOAD_SPEED, bandwidth.throttle); maxthrottle = UPLOAD_SPEED * bandwidth.throttle / 100; //printf("max throttle:%lld\n", maxthrottle); FILE *f = fopen("/proc/net/dev", "r"); if(f != NULL) { while(1) { while(fgets(cmdline, sizeof(cmdline), f) != NULL) { cmdline[strlen(cmdline)] = '\0'; if(strncmp(cmdline, " eth0", 6) == 0) { bytedata[0] = strtok(cmdline, " "); while(bytedata[i] != NULL) { i++; bytedata[i] = strtok(NULL, " "); } bytedata[i + 1] = '\0'; currentbytes = atoi(bytedata[9]); } } i = 0; rewind(f); elapsedbytes = currentbytes - prevbytes; prevbytes = currentbytes; byteusage = 8 * (elapsedbytes / 1024); //printf("usage:%lld\n",byteusage); if(ii & 0x40) { SLEEP += (maxthrottle - byteusage) * -1.1;//-2.5; if(SLEEP < 0){ SLEEP = 0; } //printf("sleep:%d\n", SLEEP); } usleep(25000); ii++; } } return NULL; } SLEEP and UPLOAD_SPEED are global variables and UPLOAD_SPEED is in kb/s and generated via a speedtest function that gets the upload speed of my computer. this function is running inside a POSIX thread updating SLEEP which my threads doing the socket work grab to sleep by after every packet. as testing instead of only doing the ports i want to check i make it do all the ports over and over again so i can run dstat on a machine to check bandwidth and no matter what bandwidth.throttle is set to it always seems to generate the same amount of bandwidth to the dstat machine. the way i calculate how much i "should" throttle by is by finding the maximum throttle speed which is defined as maxthrottle = upload_speed * throttle / 100; for example if my upload speed was 1000kb/s and my throttle was 90 (90%) my max throttle would be 900kb/s from there it would find the current bytes sent from /proc/net/dev and then find my sleep time via incrementing or decrementing it via sleep += (maxthrottle - bytesysed) * -1.1; this should in theory increase or decrease the sleep time based on how many bytes used there are. the if(ii & 0x40) statement is just for some moderation control. it makes it so it only sets sleep to a new time every 30-40 iterations. final notes: the main problem is that the sleep timer does not seem to modify the speed of packets being set. or maybe its just my implementation because on a freshly restarted machine where /proc/net/dev has low numbers of bytes sent it seems to raise the sleep timer accordingly on my 60kb/s upload machine (ex if i set the throttle to 2 it will incline the sleep timer until network bandwidth out reaches the max bandwidth threshold, but when i try running it on a server which as been online forever it doesnt seem to work as nicely if at all. if anyone can suggest a new method of monitoring the network to adjust a sleep delay then let me know or if anyone sees a flaw in my code. thank you.

Read the article

Java error starting with "log4j:WARN No appenders could be found for logger" in ZuckerReports SugarC

- by Tom McDonnell

Greetings all. I apologise for posting this problem here, but I do so in desperation after receiving no response on the SugarCRM forums. Even if a reader is unfamiliar with ZuckerReports or SugarCRM some general advice on Java may be of use to me. I have installed ZuckerReports v1.12 in SugarCRM 5.5.1. When I attempt to run a report I get the following error message. cmdline: javaw -classpath "custom/ZuckerReports/resources/;custom/ZuckerReports/resources/contact_counts_by_first_name.jasper_files/;modules/ZuckerReports/jasper/ant-1.7.1.jar;modules/ZuckerReports/jasper/antlr-2.7.6.jar;modules/ZuckerReports/jasper/asm-attrs.jar;modules/ZuckerReports/jasper/asm.jar;modules/ZuckerReports/jasper/barbecue-1.5-beta1.jar;modules/ZuckerReports/jasper/barcode4j-2.0.jar;modules/ZuckerReports/jasper/batik-anim.jar;modules/ZuckerReports/jasper/batik-awt-util.jar;modules/ZuckerReports/jasper/batik-bridge.jar;modules/ZuckerReports/jasper/batik-css.jar;modules/ZuckerReports/jasper/batik-dom.jar;modules/ZuckerReports/jasper/batik-ext.jar;modules/ZuckerReports/jasper/batik-gvt.jar;modules/ZuckerReports/jasper/batik-parser.jar;modules/ZuckerReports/jasper/batik-script.jar;modules/ZuckerReports/jasper/batik-svg-dom.jar;modules/ZuckerReports/jasper/batik-svggen.jar;modules/ZuckerReports/jasper/batik-util.jar;modules/ZuckerReports/jasper/batik-xml.jar;modules/ZuckerReports/jasper/bcel-5.2.jar;modules/ZuckerReports/jasper/bsh-2.0b4.jar;modules/ZuckerReports/jasper/castor-1.2.jar;modules/ZuckerReports/jasper/cglib-2.1.jar;modules/ZuckerReports/jasper/cincom-jr-xmla.jar;modules/ZuckerReports/jasper/commons-beanutils-1.8.2.jar;modules/ZuckerReports/jasper/commons-collections-3.2.1.jar;modules/ZuckerReports/jasper/commons-dbcp-1.2.2.jar;modules/ZuckerReports/jasper/commons-digester-1.7.jar;modules/ZuckerReports/jasper/commons-javaflow-20060411.jar;modules/ZuckerReports/jasper/commons-logging-1.1.jar;modules/ZuckerReports/jasper/commons-math-1.0.jar;modules/ZuckerReports/jasper/commons-pool-1.3.jar;modules/ZuckerReports/jasper/commons-vfs-1.0.jar;modules/ZuckerReports/jasper/dom4j-1.6.jar;modules/ZuckerReports/jasper/ehcache-1.1.jar;modules/ZuckerReports/jasper/eigenbase-properties-1.1.0.10924.jar;modules/ZuckerReports/jasper/eigenbase-resgen-1.3.0.11873.jar;modules/ZuckerReports/jasper/eigenbase-xom-1.3.0.11999.jar;modules/ZuckerReports/jasper/ejb3-persistence.jar;modules/ZuckerReports/jasper/groovy-all-1.5.5.jar;modules/ZuckerReports/jasper/hibernate-annotations.jar;modules/ZuckerReports/jasper/hibernate-commons-annotations.jar;modules/ZuckerReports/jasper/hibernate3.jar;modules/ZuckerReports/jasper/hsqldb-1.8.0-10.jar;modules/ZuckerReports/jasper/iText-2.1.0.jar;modules/ZuckerReports/jasper/iTextAsian.jar;modules/ZuckerReports/jasper/jakarta-bcel-20050813.jar;modules/ZuckerReports/jasper/jasperreports-3.7.1.jar;modules/ZuckerReports/jasper/jasperreports-chart-themes-3.6.2.jar;modules/ZuckerReports/jasper/jasperreports-extensions-3.5.3.jar;modules/ZuckerReports/jasper/jasperreports-fonts-3.6.1.jar;modules/ZuckerReports/jasper/javacup.jar;modules/ZuckerReports/jasper/javassist-3.4.GA.jar;modules/ZuckerReports/jasper/jaxen-1.1.1.jar;modules/ZuckerReports/jasper/jcommon-1.0.15.jar;modules/ZuckerReports/jasper/jdt-compiler-3.1.1.jar;modules/ZuckerReports/jasper/jfreechart-1.0.12.jar;modules/ZuckerReports/jasper/jpa.jar;modules/ZuckerReports/jasper/js_activation-1.1.jar;modules/ZuckerReports/jasper/js_axis-1.4patched.jar;modules/ZuckerReports/jasper/js_commons-codec-1.3.jar;modules/ZuckerReports/jasper/js_commons-discovery-0.2.jar;modules/ZuckerReports/jasper/js_commons-httpclient-3.1.jar;modules/ZuckerReports/jasper/js_jasperserver-common-ws-3.5.0.jar;modules/ZuckerReports/jasper/js_jaxrpc.jar;modules/ZuckerReports/jasper/js_mail-1.4.jar;modules/ZuckerReports/jasper/js_saaj-api-1.3.jar;modules/ZuckerReports/jasper/js_wsdl4j-1.5.1.jar;modules/ZuckerReports/jasper/jta.jar;modules/ZuckerReports/jasper/jxl-2.6.jar;modules/ZuckerReports/jasper/log4j-1.2.15.jar;modules/ZuckerReports/jasper/mondrian-3.1.1.12687-Jaspersoft.jar;modules/ZuckerReports/jasper/mysql-connector-java-3.1.11-bin.jar;modules/ZuckerReports/jasper/olap4j-0.9.7.145.jar;modules/ZuckerReports/jasper/png-encoder-1.5.jar;modules/ZuckerReports/jasper/poi-3.2-FINAL-20081019.jar;modules/ZuckerReports/jasper/rex-20080421.jar;modules/ZuckerReports/jasper/rhino-1.7R1.jar;modules/ZuckerReports/jasper/saaj-api-1.3.jar;modules/ZuckerReports/jasper/slf4j-api.jar;modules/ZuckerReports/jasper/slf4j-log4j12.jar;modules/ZuckerReports/jasper/spring.jar;modules/ZuckerReports/jasper/sqleonardo-2007.03.jar;modules/ZuckerReports/jasper/swingx-2007_10_07.jar;modules/ZuckerReports/jasper/xml-apis-ext.jar;modules/ZuckerReports/jasper/xml-apis.jar;modules/ZuckerReports/jasper/zuckerreports-1.0.jar" at.go_mobile.zuckerreports.JasperBatchMain custom/ZuckerReports/temp/aff882c1-684b-d2de-403e-4be367bc2f5f/cmd.properties 2&1 JasperBatchMain :: loading jasper design custom/ZuckerReports/resources/contact_counts_by_first_name.jasper JasperBatchMain :: getParameterValue(REPORT_PARAMETERS_MAP, java.util.Map) = null JasperBatchMain :: getParameterValue(JASPER_REPORT, net.sf.jasperreports.engine.JasperReport) = null JasperBatchMain :: getParameterValue(REPORT_CONNECTION, java.sql.Connection) = null JasperBatchMain :: getParameterValue(REPORT_MAX_COUNT, java.lang.Integer) = null JasperBatchMain :: getParameterValue(REPORT_DATA_SOURCE, net.sf.jasperreports.engine.JRDataSource) = null JasperBatchMain :: getParameterValue(REPORT_SCRIPTLET, net.sf.jasperreports.engine.JRAbstractScriptlet) = null JasperBatchMain :: getParameterValue(REPORT_LOCALE, java.util.Locale) = null JasperBatchMain :: getParameterValue(REPORT_RESOURCE_BUNDLE, java.util.ResourceBundle) = null JasperBatchMain :: getParameterValue(REPORT_TIME_ZONE, java.util.TimeZone) = null JasperBatchMain :: getParameterValue(REPORT_FORMAT_FACTORY, net.sf.jasperreports.engine.util.FormatFactory) = null JasperBatchMain :: getParameterValue(REPORT_CLASS_LOADER, java.lang.ClassLoader) = null JasperBatchMain :: getParameterValue(REPORT_URL_HANDLER_FACTORY, java.net.URLStreamHandlerFactory) = null JasperBatchMain :: getParameterValue(REPORT_FILE_RESOLVER, net.sf.jasperreports.engine.util.FileResolver) = null JasperBatchMain :: getParameterValue(REPORT_VIRTUALIZER, net.sf.jasperreports.engine.JRVirtualizer) = null JasperBatchMain :: getParameterValue(IS_IGNORE_PAGINATION, java.lang.Boolean) = null JasperBatchMain :: getParameterValue(REPORT_TEMPLATES, java.util.Collection) = null log4j:WARN No appenders could be found for logger (net.sf.jasperreports.extensions.ExtensionsEnviron ment). log4j:WARN Please initialize the log4j system properly. Exception in thread "main" java.lang.IllegalArgumentException: Null 'key' argument. at org.jfree.data.DefaultKeyedValues.setValue(Default KeyedValues.java:229) at org.jfree.data.DefaultKeyedValues2D.setValue(Defau ltKeyedValues2D.java:337) at org.jfree.data.DefaultKeyedValues2D.addValue(Defau ltKeyedValues2D.java:303) at org.jfree.data.category.DefaultCategoryDataset.add Value(DefaultCategoryDataset.java:222) at net.sf.jasperreports.charts.fill.JRFillCategoryDat aset.customIncrement(JRFillCategoryDataset.java:14 3) at net.sf.jasperreports.engine.fill.JRFillElementData set.increment(JRFillElementDataset.java:175) at net.sf.jasperreports.engine.fill.JRCalculator.calc ulateVariables(JRCalculator.java:148) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillDetail(JRVerticalFiller.java:736) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillReportContent(JRVerticalFiller.java:272) at net.sf.jasperreports.engine.fill.JRVerticalFiller. fillReport(JRVerticalFiller.java:114) at net.sf.jasperreports.engine.fill.JRBaseFiller.fill (JRBaseFiller.java:923) at net.sf.jasperreports.engine.fill.JRBaseFiller.fill (JRBaseFiller.java:826) at net.sf.jasperreports.engine.fill.JRFiller.fillRepo rt(JRFiller.java:59) at at.go_mobile.zuckerreports.JasperBatchMain.main(Ja sperBatchMain.java:126) The same report runs correctly in another SugarCRM installation on the same server. The installation in which the report runs correctly is of the same version, and has the same version of the ZuckerReports module. The report previously ran correctly on both installations. I think that the only changes that have been made on the installation in which the report now does not work since the report was last successfully run are the additions of a few custom fields in the Contacts module. These changes should have nothing to do with ZuckerReports. I have tried uninstalling and reinstalling the ZuckerReports module, but the problem remains. A google search for the warnings given in the error message ie. * log4j:WARN No appenders could be found for logger (net.sf.jasperreports.extensions.ExtensionsEnviron ment). * log4j:WARN Please initialize the log4j system properly. Returns a few links (not specific to ZuckerReports) with tips similar to the following: * log4j.properties or log4j.xml needs to be on the classpath where log4j can find it. I cannot find a file with either of those names anywhere on my server, and yet the report can be run successfully on one of my SugarCRM installations. So I figure log4j must be being configured another way. Can anyone suggest a way to solve this problem? Or explain how I might discover how log4j is configured in ZuckerReports? Or explain how I might compare the working with the non-working installation in order to help find a solution? (I have tried searching for files containing "log4j" in both installations and comparing but all I can find are .jar files (nothing I can read with a text editor), and the .jar files found in each installation appear to be the same.)

Read the article

Norton Ghost EBAB03F1: The specified network name is no longer available.

- by Breck Carter

After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

Read the article

Hadoop hdfs namenode is throwing an error

- by KarmicDice

Full list of error: hb@localhost:/etc/hadoop/conf$ sudo service hadoop-hdfs-namenode start * Starting Hadoop namenode: starting namenode, logging to /var/log/hadoop-hdfs/hadoop-hdfs-namenode-localhost.out 12/09/10 14:41:09 INFO namenode.NameNode: STARTUP_MSG: /************************************************************ STARTUP_MSG: Starting NameNode STARTUP_MSG: host = localhost/127.0.0.1 STARTUP_MSG: args = [] STARTUP_MSG: version = 2.0.0-cdh4.0.1 STARTUP_MSG: classpath = /etc/hadoop/conf:/usr/lib/hadoop/lib/xmlenc-0.52.jar:/usr/lib/hadoop/lib/protobuf-java-2.4.0a.jar:/usr/lib/hadoop/lib/kfs-0.3.jar:/usr/lib/hadoop/lib/asm-3.2.jar:/usr/lib/hadoop/lib/commons-logging-api-1.1.jar:/usr/lib/hadoop/lib/jasper-compiler-5.5.23.jar:/usr/lib/hadoop/lib/stax-api-1.0.1.jar:/usr/lib/hadoop/lib/commons-configuration-1.6.jar:/usr/lib/hadoop/lib/jets3t-0.6.1.jar:/usr/lib/hadoop/lib/jersey-server-1.8.jar:/usr/lib/hadoop/lib/oro-2.0.8.jar:/usr/lib/hadoop/lib/aspectjrt-1.6.5.jar:/usr/lib/hadoop/lib/json-simple-1.1.jar:/usr/lib/hadoop/lib/snappy-java-1.0.3.2.jar:/usr/lib/hadoop/lib/commons-httpclient-3.1.jar:/usr/lib/hadoop/lib/log4j-1.2.15.jar:/usr/lib/hadoop/lib/servlet-api-2.5.jar:/usr/lib/hadoop/lib/jackson-xc-1.8.8.jar:/usr/lib/hadoop/lib/jersey-json-1.8.jar:/usr/lib/hadoop/lib/jackson-mapper-asl-1.8.8.jar:/usr/lib/hadoop/lib/commons-el-1.0.jar:/usr/lib/hadoop/lib/slf4j-api-1.6.1.jar:/usr/lib/hadoop/lib/commons-collections-3.2.1.jar:/usr/lib/hadoop/lib/commons-logging-1.1.1.jar:/usr/lib/hadoop/lib/jackson-core-asl-1.8.8.jar:/usr/lib/hadoop/lib/jersey-core-1.8.jar:/usr/lib/hadoop/lib/commons-codec-1.4.jar:/usr/lib/hadoop/lib/jsr305-1.3.9.jar:/usr/lib/hadoop/lib/commons-cli-1.2.jar:/usr/lib/hadoop/lib/activation-1.1.jar:/usr/lib/hadoop/lib/jaxb-impl-2.2.3-1.jar:/usr/lib/hadoop/lib/jetty-util-6.1.26.cloudera.1.jar:/usr/lib/hadoop/lib/jasper-runtime-5.5.23.jar:/usr/lib/hadoop/lib/commons-beanutils-1.7.0.jar:/usr/lib/hadoop/lib/commons-lang-2.5.jar:/usr/lib/hadoop/lib/commons-digester-1.8.jar:/usr/lib/hadoop/lib/commons-io-2.1.jar:/usr/lib/hadoop/lib/jsp-api-2.1.jar:/usr/lib/hadoop/lib/guava-11.0.2.jar:/usr/lib/hadoop/lib/jetty-6.1.26.cloudera.1.jar:/usr/lib/hadoop/lib/jsch-0.1.42.jar:/usr/lib/hadoop/lib/zookeeper-3.4.3-cdh4.0.1.jar:/usr/lib/hadoop/lib/avro-1.5.4.jar:/usr/lib/hadoop/lib/core-3.1.1.jar:/usr/lib/hadoop/lib/paranamer-2.3.jar:/usr/lib/hadoop/lib/jettison-1.1.jar:/usr/lib/hadoop/lib/jackson-jaxrs-1.8.8.jar:/usr/lib/hadoop/lib/slf4j-log4j12-1.6.1.jar:/usr/lib/hadoop/lib/commons-beanutils-core-1.8.0.jar:/usr/lib/hadoop/lib/commons-net-3.1.jar:/usr/lib/hadoop/lib/jaxb-api-2.2.2.jar:/usr/lib/hadoop/lib/commons-math-2.1.jar:/usr/lib/hadoop/lib/jline-0.9.94.jar:/usr/lib/hadoop/.//hadoop-annotations.jar:/usr/lib/hadoop/.//hadoop-annotations-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop/.//hadoop-common-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop/.//hadoop-auth-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop/.//hadoop-common.jar:/usr/lib/hadoop/.//hadoop-auth.jar:/usr/lib/hadoop/.//hadoop-common-2.0.0-cdh4.0.1-tests.jar:/usr/lib/hadoop-hdfs/./:/usr/lib/hadoop-hdfs/lib/protobuf-java-2.4.0a.jar:/usr/lib/hadoop-hdfs/lib/snappy-java-1.0.3.2.jar:/usr/lib/hadoop-hdfs/lib/log4j-1.2.15.jar:/usr/lib/hadoop-hdfs/lib/jackson-mapper-asl-1.8.8.jar:/usr/lib/hadoop-hdfs/lib/slf4j-api-1.6.1.jar:/usr/lib/hadoop-hdfs/lib/commons-logging-1.1.1.jar:/usr/lib/hadoop-hdfs/lib/jackson-core-asl-1.8.8.jar:/usr/lib/hadoop-hdfs/lib/commons-daemon-1.0.3.jar:/usr/lib/hadoop-hdfs/lib/zookeeper-3.4.3-cdh4.0.1.jar:/usr/lib/hadoop-hdfs/lib/avro-1.5.4.jar:/usr/lib/hadoop-hdfs/lib/paranamer-2.3.jar:/usr/lib/hadoop-hdfs/lib/jline-0.9.94.jar:/usr/lib/hadoop-hdfs/.//hadoop-hdfs-2.0.0-cdh4.0.1-tests.jar:/usr/lib/hadoop-hdfs/.//hadoop-hdfs-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-hdfs/.//hadoop-hdfs.jar:/usr/lib/hadoop-yarn/lib/protobuf-java-2.4.0a.jar:/usr/lib/hadoop-yarn/lib/asm-3.2.jar:/usr/lib/hadoop-yarn/lib/netty-3.2.3.Final.jar:/usr/lib/hadoop-yarn/lib/javax.inject-1.jar:/usr/lib/hadoop-yarn/lib/jersey-server-1.8.jar:/usr/lib/hadoop-yarn/lib/jersey-guice-1.8.jar:/usr/lib/hadoop-yarn/lib/snappy-java-1.0.3.2.jar:/usr/lib/hadoop-yarn/lib/log4j-1.2.15.jar:/usr/lib/hadoop-yarn/lib/guice-3.0.jar:/usr/lib/hadoop-yarn/lib/jackson-mapper-asl-1.8.8.jar:/usr/lib/hadoop-yarn/lib/junit-4.8.2.jar:/usr/lib/hadoop-yarn/lib/jackson-core-asl-1.8.8.jar:/usr/lib/hadoop-yarn/lib/jersey-core-1.8.jar:/usr/lib/hadoop-yarn/lib/jdiff-1.0.9.jar:/usr/lib/hadoop-yarn/lib/guice-servlet-3.0.jar:/usr/lib/hadoop-yarn/lib/aopalliance-1.0.jar:/usr/lib/hadoop-yarn/lib/commons-io-2.1.jar:/usr/lib/hadoop-yarn/lib/avro-1.5.4.jar:/usr/lib/hadoop-yarn/lib/paranamer-2.3.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-web-proxy.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-nodemanager.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-resourcemanager-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-common.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-common.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-applications-distributedshell-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-web-proxy-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-api.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-resourcemanager.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-common-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-server-nodemanager-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-site.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-api-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-common-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-applications-distributedshell.jar:/usr/lib/hadoop-yarn/.//hadoop-yarn-site-2.0.0-cdh4.0.1.jar:/usr/lib/hadoop-mapreduce/.//* STARTUP_MSG: build = file:///var/lib/jenkins/workspace/generic-package-ubuntu64-12-04/CDH4.0.1-Packaging-Hadoop-2012-06-28_17-01-57/hadoop-2.0.0+91-1.cdh4.0.1.p0.1~precise/src/hadoop-common-project/hadoop-common -r 4d98eb718ec0cce78a00f292928c5ab6e1b84695; compiled by 'jenkins' on Thu Jun 28 17:39:19 PDT 2012 ************************************************************/ 12/09/10 14:41:10 WARN impl.MetricsConfig: Cannot locate configuration: tried hadoop-metrics2-namenode.properties,hadoop-metrics2.properties hdfs-site.xml: hb@localhost:/etc/hadoop/conf$ cat hdfs-site.xml <?xml version="1.0" encoding="UTF-8"?>  <configuration> <property> <name>dfs.https.address</name> <value>localhost:50470</value> </property> <property> <name>dfs.https.port</name> <value>50470</value> </property> <property> <name>dfs.namenode.http-address</name> <value>localhost:50070</value> </property> <property> <name>dfs.replication</name> <value>1</value> </property> <property> <name>dfs.blocksize</name> <value>134217728</value> </property> <property> <name>dfs.client.use.datanode.hostname</name> <value>false</value> </property> </configuration>

Read the article

Norton Ghost EBAB03F1: The specified network name is no longer available

- by Breck Carter

After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

Read the article

IIS Strategies for Accessing Secured Network Resources

- by ErikE

Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running under doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for both the web server and the domain account so they are "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

Read the article

IIS Strategies for Accessing Secured Network Resources

- by Emtucifor

Problem: A user connects to a service on a machine, such as an IIS web site or a SQL Server database. The site or the database need to gain access to network resources such as file shares (the most common) or a database on a different server. Permission is denied. This is because the user the service is running as doesn't have network permissions in the first place, or if it does, it doesn't have rights to access the remote resource. I keep running into this problem over and over again and am tired of not having a really solid way of handling it. Here are some workarounds I'm aware of: Run IIS as a custom-created domain user who is granted high permissions If permissions are granted one file share at a time, then every time I want to read from a new share, I would have to ask a network admin to add it for me. Eventually, with many web sites reading from many shares, it is going to get really complicated. If permissions are just opened up wide for the user to access any file shares in our domain, then this seems like an unnecessary security surface area to present. This also applies to all the sites running on IIS, rather than just the selected site or virtual directory that needs the access, a further surface area problem. Still use the IUSR account but give it network permissions and set up the same user name on the remote resource (not a domain user, a local user) This also has its problems. For example, there's a file share I am using that I have full rights to for sharing, but I can't log in to the machine. So I have to find the right admin and ask him to do it for me. Any time something has to change, it's another request to an admin. Allow IIS users to connect as anonymous, but set the account used for anonymous access to a high-privilege one This is even worse than giving the IIS IUSR full privileges, because it means my web site can't use any kind of security in the first place. Connect using Kerberos, then delegate This sounds good in principle but has all sorts of problems. First of all, if you're using virtual web sites where the domain name you connect to the site with is not the base machine name (as we do frequently), then you have to set up a Service Principal Name on the webserver using Microsoft's SetSPN utility. It's complicated and apparently prone to errors. Also, you have to ask your network/domain admin to change security policy for the web server so it is "trusted for delegation." If you don't get everything perfectly right, suddenly your intended Kerberos authentication is NTLM instead, and you can only impersonate rather than delegate, and thus no reaching out over the network as the user. Also, this method can be problematic because sometimes you need the web site or database to have permissions that the connecting user doesn't have. Create a service or COM+ application that fetches the resource for the web site Services and COM+ packages are run with their own set of credentials. Running as a high-privilege user is okay since they can do their own security and deny requests that are not legitimate, putting control in the hands of the application developer instead of the network admin. Problems: I am using a COM+ package that does exactly this on Windows Server 2000 to deliver highly sensitive images to a secured web application. I tried moving the web site to Windows Server 2003 and was suddenly denied permission to instantiate the COM+ object, very likely registry permissions. I trolled around quite a bit and did not solve the problem, partly because I was reluctant to give the IUSR account full registry permissions. That seems like the same bad practice as just running IIS as a high-privilege user. Note: This is actually really simple. In a programming language of your choice, you create a class with a function that returns an instance of the object you want (an ADODB.Connection, for example), and build a dll, which you register as a COM+ object. In your web server-side code, you create an instance of the class and use the function, and since it is running under a different security context, calls to network resources work. Map drive letters to shares This could theoretically work, but in my mind it's not really a good long-term strategy. Even though mappings can be created with specific credentials, and this can be done by others than a network admin, this also is going to mean that there are either way too many shared drives (small granularity) or too much permission is granted to entire file servers (large granularity). Also, I haven't figured out how to map a drive so that the IUSR gets the drives. Mapping a drive is for the current user, I don't know the IUSR account password to log in as it and create the mappings. Move the resources local to the web server/database There are times when I've done this, especially with Access databases. Does the database have to live out on the file share? Sometimes, it was just easiest to move the database to the web server or to the SQL database server (so the linked server to it would work). But I don't think this is a great all-around solution, either. And it won't work when the resource is a service rather than a file. Move the service to the final web server/database I suppose I could run a web server on my SQL Server database, so the web site can connect to it using impersonation and make me happy. But do we really want random extra web servers on our database servers just so this is possible? No. Virtual directories in IIS I know that virtual directories can help make remote resources look as though they are local, and this supports using custom credentials for each virtual directory. I haven't been able to come up with, yet, how this would solve the problem for system calls. Users could reach file shares directly, but this won't help, say, classic ASP code access resources. I could use a URL instead of a file path to read remote data files in a web page, but this isn't going to help me make a connection to an Access database, a SQL server database, or any other resource that uses a connection library rather than being able to just read all the bytes and work with them. I wish there was some kind of "service tunnel" that I could create. Think about how a VPN makes remote resources look like they are local. With a richer aliasing mechanism, perhaps code-based, why couldn't even database connections occur under a defined security context? Why not a special Windows component that lets you specify, per user, what resources are available and what alternate credentials are used for the connection? File shares, databases, web sites, you name it. I guess I'm almost talking about a specialized local proxy server. Anyway, so there's my list. I may update it if I think of more. Does anyone have any ideas for me? My current problem today is, yet again, I need a web site to connect to an Access database on a file share. Here we go again...

Read the article

Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

- by Blaine

We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

Read the article

Use DivX settings to encode to mp4 with ffmpeg

- by sjngm

I'm used to use VirtualDub to encode a video to AVI container with DivX-codec (and MP3 for audio). Now I'm planning to use ffmpeg to encode videos to MP4 container with h264-codec. What I've figured out is that I need to use libx264 and one of those presets to make anything work. However, I'm amazed about the video bitrate ffmpeg uses for encoding. What I currently have is this little batch file: @ECHO OFF SETLOCAL SET IN=source.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-fpre "%FFMPEG_PATH%\presets\libx264-lossless_slow.ffpreset" SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %VIDEO% %PRESET% test.mp4 ENDLOCAL With this I tell ffmpeg to use 1978k as the bitrate, but ffmpeg uses 15000k+! I tried other presets, but they don't use my specified bitrate. Here are the presets I have: libx264-baseline.ffpreset libx264-ipod320.ffpreset libx264-ipod640.ffpreset libx264-lossless_fast.ffpreset libx264-lossless_max.ffpreset libx264-lossless_medium.ffpreset libx264-lossless_slow.ffpreset libx264-lossless_slower.ffpreset libx264-lossless_ultrafast.ffpreset ffmpeg version: FFmpeg git-N-29181-ga304071 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 Note that I don't use the latest version as it has problems with spaces in filenames. Here's what seems to be the full parameter list DivX 6.9.2 uses: -bvnn 1978000 -vbv 218691200,100663296,100663296 -dir "C:\Users\sjngm\AppData\Roaming\DivX\DivX Codec" -w -b 1 -use_presets=1 -preset=10 -windowed_fullsearch=2 -thread_delay=1 What command line parameters would that be for ffmpeg? EDIT: Going with slhck's suggestion I tried a new 32-bit version. I have no idea if that is 0.9 or newer, I can't find that info. ffmpeg version N-36890-g67f5650 libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 I reworked my batch file to look like this (interestingly enough I can't find parameter -vprofile in the documentation): @ECHO OFF SETLOCAL SET IN=VTS_01_1.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-vprofile high -preset veryslow SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %PRESET% %VIDEO% test.mp4 ENDLOCAL I see that it now uses the bitrate properly (thanks to LongNeckbeard for pointing out that the lossless-stuff ignores the bitrate!). Just in case you wonder how I came up with the 1978000, I'm using this formula which I found valid for DivX-files (I'm guessing the bitrate won't change that much for h264): width * height * 25 * 0.22 / 1000 I'm not sure if the 0.22 correlates with the CRF somehow. Overall I forgot to say the I will use a two-pass scenario, which is why I don't use the CRF here. I will try to read more about this. Currently I'm just trying to get something running that shows me that I'm doing something right (ffmpeg isn't the easiest tool to understand ;)). C:\Program Files (x86)\ffmpeg\ffmpeg.exe" -i VTS_01_1.avs -acodec libmp3lame -ab 128000 -vcodec libx264 -vb 1978000 -vprofile high -preset veryslow test.mp4 The output is now: ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 Input #0, avs, from 'VTS_01_1.avs': Duration: 00:58:46.12, start: 0.000000, bitrate: 0 kb/s Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 576x448, 77414 kb/s, 25 tbr, 25 tbn, 25 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 48000 Hz, 2 channels, s16, 1536 kb/s File 'test.mp4' already exists. Overwrite ? [y/N] y w:576 h:448 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: [libx264 @ 05A2C400] using cpu capabilities: MMX2 SSE2Fast FastShuffle SSEMisalign LZCNT [libx264 @ 05A2C400] profile High, level 3.1 [libx264 @ 05A2C400] 264 - core 120 r2120 0c7dab9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=16 deblock=1:0:0 analyse=0x3:0x133 me=umh subme=10 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=24 chroma_me=1 trellis=2 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=8 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=60 rc=abr mbtree=1 bitrate=1978 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'test.mp4': Metadata: encoder : Lavf53.30.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuv420p, 576x448, q=-1--1, 1978 kb/s, 25 tbn, 25 tbc Stream #0:1: Audio: mp3 (i[0][0][0] / 0x0069), 48000 Hz, 2 channels, s16, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #0:1 -> #0:1 (pcm_s16le -> libmp3lame) Press [q] to stop, [?] for help frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 3 fps= 1 q=22.0 size= 39kB time=00:00:00.04 bitrate=8063.8kbits/ frame= 8 fps= 2 q=22.0 size= 82kB time=00:00:00.24 bitrate=2801.3kbits/ frame= 13 fps= 3 q=23.0 size= 120kB time=00:00:00.44 bitrate=2229.5kbits/ frame= 16 fps= 4 q=23.0 size= 147kB time=00:00:00.56 bitrate=2156.7kbits/ frame= 20 fps= 4 q=22.0 size= 175kB time=00:00:00.72 bitrate=1987.4kbits/ : video:4387kB audio:273kB global headers:0kB muxing overhead 0.260038% [libx264 @ 05A2C400] frame I:2 Avg QP:19.53 size: 29850 [libx264 @ 05A2C400] frame P:76 Avg QP:22.24 size: 19541 [libx264 @ 05A2C400] frame B:359 Avg QP:25.93 size: 8210 [libx264 @ 05A2C400] consecutive B-frames: 0.5% 0.5% 0.0% 8.2% 17.2% 52.2% 16.0% 5.5% 0.0% [libx264 @ 05A2C400] mb I I16..4: 5.4% 75.3% 19.3% [libx264 @ 05A2C400] mb P I16..4: 1.3% 16.5% 2.2% P16..4: 36.3% 28.6% 12.7% 1.8% 0.2% skip: 0.4% [libx264 @ 05A2C400] mb B I16..4: 0.4% 3.8% 0.3% B16..8: 40.0% 18.4% 4.7% direct:18.5% skip:13.9% L0:45.4% L1:38.1% BI:16.5% [libx264 @ 05A2C400] final ratefactor: 20.35 [libx264 @ 05A2C400] 8x8 transform intra:83.1% inter:68.5% [libx264 @ 05A2C400] direct mvs spatial:99.2% temporal:0.8% [libx264 @ 05A2C400] coded y,uvDC,uvAC intra: 64.9% 83.4% 49.2% inter: 49.0% 50.4% 4.4% [libx264 @ 05A2C400] i16 v,h,dc,p: 25% 22% 27% 26% [libx264 @ 05A2C400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 7% 23% 9% 10% 10% 10%10% 13% [libx264 @ 05A2C400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 11% 13% 9% 12% 11% 10% 9% 12% [libx264 @ 05A2C400] i8c dc,h,v,p: 42% 28% 16% 14% [libx264 @ 05A2C400] Weighted P-Frames: Y:18.4% UV:7.9% [libx264 @ 05A2C400] ref P L0: 29.1% 11.3% 15.7% 7.3% 6.9% 4.9% 5.1% 3.4%3.9% 2.7% 2.8% 1.8% 1.7% 1.2% 1.4% 0.9% [libx264 @ 05A2C400] ref B L0: 68.8% 11.4% 5.5% 2.9% 2.3% 1.9% 1.5% 1.1%1.1% 1.0% 0.9% 0.7% 0.5% 0.3% 0.1% [libx264 @ 05A2C400] ref B L1: 91.9% 8.1% [libx264 @ 05A2C400] kb/s:2055.88 As far as I'm concerned it doesn't look that bad to me.

Read the article

Multiple routers, subnets, gateways etc

- by allentown

My current setup is: Cable modem dishes out 13 static IP's (/28), a GB switch is plugged into the cable modem, and has access to those 13 static IP's, I have about 6 "servers" in use right now. The cable modem is also a firewall, DHCP server, and 3 port 10/100 switch. I am using it as a firewall, but not currently as a DHCP server. I have plugged into the cable modem, two network cables, one which goes to the WAN port of a Linksys Dual Band Wireless 10/100/1000 router/switch. Into the linksys are a few workstations, a few printers, and some laptops connecting to wifi. I set the Linksys to use take static IP, and enabled DHCP for the workstations, printers, etc in 192.168.1.1/24. The network for the Linksys is mostly self contained, backups go to a SAN, on that network, it all happens through that switch, over GB. But I also get internet access from it as well via the cable modem using one static IP. This all works, however, I can not "see" the static IP machines when I am on the Linksys. I can get to them via ssh and other protocols, and if I want to from "outside", I open holes, like 80, 25, 587, 143, 22, etc. The second wire, from the cable modem/fireall/switch just uplinks to the managed GB switch. What are the pros and cons of this? I do not like giving up the static IP to the Linksys. I basically have a mixed network of public servers, and internal workstations. I want the public servers on public IP's because I do not want to mess with port forwarding and mappings. Is it correct also, that if someone breaches the Linksys wifi, they still would have a hard time getting to the static IP range, just by nature of the network topology? Today, just for a test, I toggled on the DHCP in the firewall/cable modem at 10.1.10.1/24 range, the Linksys is n the 192.168.1.100/24 range. At that point, all the static IP machines still had in and out access, but Linksys was unreachable. The cable modem only has 10/100 ports, so I will not plug anything but the network drop into it, which is 50Mb/10Mb. Which makes me think this could be less than ideal, as transfers from the workstation network to the server network will be bottlenecked at 100Mb when I have 1000Mb available. I may not need to solve that, if isolation is better though. I do not move a lot of data, if any, from Linsys network to server network, so for it to pretend to be remote is ok. Should I approach this any different? I could enable DHCP on the cable modem/firewall, it should still send out the statics to the GB switch, but will also be a DHCP in 10.1.10.1/24 range? I can then plug the Linksys into the GB switch, which is now picking up statics and the 10.1.10.1/24 ranges, tell the Linksys to use 10.1.10.5 or so. Now, do I disable DHCP on the Linksys, and the cable modem/firewall will pass through the statics and 10.0.10.1/24 ranges as well? Or, could I open a second DHCP pool on the Linksys? I guess doing so gives me network isolation again, but it is just the reverse of what I have now. But I get out of the bottleneck, not that the Linksys could ever really touch real GB speeds anyway, but the managed switch certainly can. This is all because 13 statics are not that many. Right now, 6 "servers", the Linksys, a managed switch, a few SSL certs, and I am running out. I do not want to waste a static IP on the managed GB switch, or the Linksys, unless it provides me some type of benefit. Final question, under my current setup, if I am on a workstation, sitting at 192.168.1.109, the Linksys, with GB, and I send a file over ssh to the static IP machine, is that literally leaving the internet, and coming back in, or does it stay local? To me it seems like: Workstation (192.168.1.109) -> Linksys DHCP -> Linksys Static IP -> Cable Modem -> Server ( and it hits the 10/100 ports on the cable modem, slowing me down. But does it round trip the network, leave and come back in, limiting me to the 50/10 internet speeds? *These are all made up numbers, I do not use default router IP's as I will one day add a VPN, and do not want collisions. I need some recommendations, do I want one big network, or two isolated ones. Printers these days need an IP, everything does, I can not get autoconf/bonjour to be reliable on most printers. but I am also not sure I want the "server" side of my operation to be polluted by the workstation side of my operation. Unless there is some magic subetting I have not learned yet, here is what I am thinking: Cable modem 10/100, has 13 static IP, publicly accessible -> Enable DHCP on the cable modem -> Cable modem plugs into managed switch -> Managed switch gets 10.1.10.1 ssh, telnet, https admin management address -> Managed switch sends static IP's to to servers -> Plug Linksys into managed switch, giving it 10.1.10.2 static internally in Linksys admin -> Linksys gets assigned 10.1.10.x as its DHCP sending range -> Local printers, workstations, iPhones etc, connect to this -> ( Do I enable DHCP or disable it on the Linksys, just define a non over lapping range, or create an entirely new DHCP at 10.1.50.0/24, I think I am back isolated again with that method too? ) Thank you for any suggestions. This is the first time I have had to deal with less than a /24, and most are larger than that, but it is just a drop to a cabinet. Otherwise, it's a router, a few repeaters, and soho stuff that is simple, with one IP. I know a few may suggest going all DHCP on the servers, and I may one day, just not now, there has been too much moving of gear for me to be interested in that, and I would want something in the Catalyst series to deal with that.

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

Creating Custom Ajax Control Toolkit Controls

- by Stephen Walther

The goal of this blog entry is to explain how you can extend the Ajax Control Toolkit with custom Ajax Control Toolkit controls. I describe how you can create the two halves of an Ajax Control Toolkit control: the server-side control extender and the client-side control behavior. Finally, I explain how you can use the new Ajax Control Toolkit control in a Web Forms page. At the end of this blog entry, there is a link to download a Visual Studio 2010 solution which contains the code for two Ajax Control Toolkit controls: SampleExtender and PopupHelpExtender. The SampleExtender contains the minimum skeleton for creating a new Ajax Control Toolkit control. You can use the SampleExtender as a starting point for your custom Ajax Control Toolkit controls. The PopupHelpExtender control is a super simple custom Ajax Control Toolkit control. This control extender displays a help message when you start typing into a TextBox control. The animated GIF below demonstrates what happens when you click into a TextBox which has been extended with the PopupHelp extender. Here’s a sample of a Web Forms page which uses the control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowPopupHelp.aspx.cs" Inherits="MyACTControls.Web.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head runat="server"> <title>Show Popup Help</title> </head> <body> <form id="form1" runat="server"> <div> <act:ToolkitScriptManager ID="tsm" runat="server" /> <%-- Social Security Number --%> <asp:Label ID="lblSSN" Text="SSN:" AssociatedControlID="txtSSN" runat="server" /> <asp:TextBox ID="txtSSN" runat="server" /> <act:PopupHelpExtender id="ph1" TargetControlID="txtSSN" HelpText="Please enter your social security number." runat="server" /> <%-- Social Security Number --%> <asp:Label ID="lblPhone" Text="Phone Number:" AssociatedControlID="txtPhone" runat="server" /> <asp:TextBox ID="txtPhone" runat="server" /> <act:PopupHelpExtender id="ph2" TargetControlID="txtPhone" HelpText="Please enter your phone number." runat="server" /> </div> </form> </body> </html> In the page above, the PopupHelp extender is used to extend the functionality of the two TextBox controls. When focus is given to a TextBox control, the popup help message is displayed. An Ajax Control Toolkit control extender consists of two parts: a server-side control extender and a client-side behavior. For example, the PopupHelp extender consists of a server-side PopupHelpExtender control (PopupHelpExtender.cs) and a client-side PopupHelp behavior JavaScript script (PopupHelpBehavior.js). Over the course of this blog entry, I describe how you can create both the server-side extender and the client-side behavior. Writing the Server-Side Code Creating a Control Extender You create a control extender by creating a class that inherits from the abstract ExtenderControlBase class. For example, the PopupHelpExtender control is declared like this: public class PopupHelpExtender: ExtenderControlBase { } The ExtenderControlBase class is part of the Ajax Control Toolkit. This base class contains all of the common server properties and methods of every Ajax Control Toolkit extender control. The ExtenderControlBase class inherits from the ExtenderControl class. The ExtenderControl class is a standard class in the ASP.NET framework located in the System.Web.UI namespace. This class is responsible for generating a client-side behavior. The class generates a call to the Microsoft Ajax Library $create() method which looks like this: <script type="text/javascript"> $create(MyACTControls.PopupHelpBehavior, {"HelpText":"Please enter your social security number.","id":"ph1"}, null, null, $get("txtSSN")); }); </script> The JavaScript $create() method is part of the Microsoft Ajax Library. The reference for this method can be found here: http://msdn.microsoft.com/en-us/library/bb397487.aspx This method accepts the following parameters: type – The type of client behavior to create. The $create() method above creates a client PopupHelpBehavior. Properties – Enables you to pass initial values for the properties of the client behavior. For example, the initial value of the HelpText property. This is how server property values are passed to the client. Events – Enables you to pass client-side event handlers to the client behavior. References – Enables you to pass references to other client components. Element – The DOM element associated with the client behavior. This will be the DOM element associated with the control being extended such as the txtSSN TextBox. The $create() method is generated for you automatically. You just need to focus on writing the server-side control extender class. Specifying the Target Control All Ajax Control Toolkit extenders inherit a TargetControlID property from the ExtenderControlBase class. This property, the TargetControlID property, points at the control that the extender control extends. For example, the Ajax Control Toolkit TextBoxWatermark control extends a TextBox, the ConfirmButton control extends a Button, and the Calendar control extends a TextBox. You must indicate the type of control which your extender is extending. You indicate the type of control by adding a [TargetControlType] attribute to your control. For example, the PopupHelp extender is declared like this: [TargetControlType(typeof(TextBox))] public class PopupHelpExtender: ExtenderControlBase { } The PopupHelp extender can be used to extend a TextBox control. If you try to use the PopupHelp extender with another type of control then an exception is thrown. If you want to create an extender control which can be used with any type of ASP.NET control (Button, DataView, TextBox or whatever) then use the following attribute: [TargetControlType(typeof(Control))] Decorating Properties with Attributes If you decorate a server-side property with the [ExtenderControlProperty] attribute then the value of the property gets passed to the control’s client-side behavior. The value of the property gets passed to the client through the $create() method discussed above. The PopupHelp control contains the following HelpText property: [ExtenderControlProperty] [RequiredProperty] public string HelpText { get { return GetPropertyValue("HelpText", "Help Text"); } set { SetPropertyValue("HelpText", value); } } The HelpText property determines the help text which pops up when you start typing into a TextBox control. Because the HelpText property is decorated with the [ExtenderControlProperty] attribute, any value assigned to this property on the server is passed to the client automatically. For example, if you declare the PopupHelp extender in a Web Form page like this: <asp:TextBox ID="txtSSN" runat="server" /> <act:PopupHelpExtender id="ph1" TargetControlID="txtSSN" HelpText="Please enter your social security number." runat="server" /> Then the PopupHelpExtender renders the call to the the following Microsoft Ajax Library $create() method: $create(MyACTControls.PopupHelpBehavior, {"HelpText":"Please enter your social security number.","id":"ph1"}, null, null, $get("txtSSN")); You can see this call to the JavaScript $create() method by selecting View Source in your browser. This call to the $create() method calls a method named set_HelpText() automatically and passes the value “Please enter your social security number”. There are several attributes which you can use to decorate server-side properties including: ExtenderControlProperty – When a property is marked with this attribute, the value of the property is passed to the client automatically. ExtenderControlEvent – When a property is marked with this attribute, the property represents a client event handler. Required – When a value is not assigned to this property on the server, an error is displayed. DefaultValue – The default value of the property passed to the client. ClientPropertyName – The name of the corresponding property in the JavaScript behavior. For example, the server-side property is named ID (uppercase) and the client-side property is named id (lower-case). IDReferenceProperty – Applied to properties which refer to the IDs of other controls. URLProperty – Calls ResolveClientURL() to convert from a server-side URL to a URL which can be used on the client. ElementReference – Returns a reference to a DOM element by performing a client $get(). The WebResource, ClientResource, and the RequiredScript Attributes The PopupHelp extender uses three embedded resources named PopupHelpBehavior.js, PopupHelpBehavior.debug.js, and PopupHelpBehavior.css. The first two files are JavaScript files and the final file is a Cascading Style sheet file. These files are compiled as embedded resources. You don’t need to mark them as embedded resources in your Visual Studio solution because they get added to the assembly when the assembly is compiled by a build task. You can see that these files get embedded into the MyACTControls assembly by using Red Gate’s .NET Reflector tool: In order to use these files with the PopupHelp extender, you need to work with both the WebResource and the ClientScriptResource attributes. The PopupHelp extender includes the following three WebResource attributes. [assembly: WebResource("PopupHelp.PopupHelpBehavior.js", "text/javascript")] [assembly: WebResource("PopupHelp.PopupHelpBehavior.debug.js", "text/javascript")] [assembly: WebResource("PopupHelp.PopupHelpBehavior.css", "text/css", PerformSubstitution = true)] These WebResource attributes expose the embedded resource from the assembly so that they can be accessed by using the ScriptResource.axd or WebResource.axd handlers. The first parameter passed to the WebResource attribute is the name of the embedded resource and the second parameter is the content type of the embedded resource. The PopupHelp extender also includes the following ClientScriptResource and ClientCssResource attributes: [ClientScriptResource("MyACTControls.PopupHelpBehavior", "PopupHelp.PopupHelpBehavior.js")] [ClientCssResource("PopupHelp.PopupHelpBehavior.css")] Including these attributes causes the PopupHelp extender to request these resources when you add the PopupHelp extender to a page. If you open View Source in a browser which uses the PopupHelp extender then you will see the following link for the Cascading Style Sheet file: <link href="/WebResource.axd?d=0uONMsWXUuEDG-pbJHAC1kuKiIMteQFkYLmZdkgv7X54TObqYoqVzU4mxvaa4zpn5H9ch0RDwRYKwtO8zM5mKgO6C4WbrbkWWidKR07LD1d4n4i_uNB1mHEvXdZu2Ae5mDdVNDV53znnBojzCzwvSw2&t=634417392021676003" type="text/css" rel="stylesheet" /> You also will see the following script include for the JavaScript file: <script src="/ScriptResource.axd?d=pIS7xcGaqvNLFBvExMBQSp_0xR3mpDfS0QVmmyu1aqDUjF06TrW1jVDyXNDMtBHxpRggLYDvgFTWOsrszflZEDqAcQCg-hDXjun7ON0Ol7EXPQIdOe1GLMceIDv3OeX658-tTq2LGdwXhC1-dE7_6g2&t=ffffffff88a33b59" type="text/javascript"></script> The JavaScrpt file returned by this request to ScriptResource.axd contains the combined scripts for any and all Ajax Control Toolkit controls in a page. By default, the Ajax Control Toolkit combines all of the JavaScript files required by a page into a single JavaScript file. Combining files in this way really speeds up how quickly all of the JavaScript files get delivered from the web server to the browser. So, by default, there will be only one ScriptResource.axd include for all of the JavaScript files required by a page. If you want to disable Script Combining, and create separate links, then disable Script Combining like this: <act:ToolkitScriptManager ID="tsm" runat="server" CombineScripts="false" /> There is one more important attribute used by Ajax Control Toolkit extenders. The PopupHelp behavior uses the following two RequirdScript attributes to load the JavaScript files which are required by the PopupHelp behavior: [RequiredScript(typeof(CommonToolkitScripts), 0)] [RequiredScript(typeof(PopupExtender), 1)] The first parameter of the RequiredScript attribute represents either the string name of a JavaScript file or the type of an Ajax Control Toolkit control. The second parameter represents the order in which the JavaScript files are loaded (This second parameter is needed because .NET attributes are intrinsically unordered). In this case, the RequiredScript attribute will load the JavaScript files associated with the CommonToolkitScripts type and the JavaScript files associated with the PopupExtender in that order. The PopupHelp behavior depends on these JavaScript files. Writing the Client-Side Code The PopupHelp extender uses a client-side behavior written with the Microsoft Ajax Library. Here is the complete code for the client-side behavior: (function () { // The unique name of the script registered with the // client script loader var scriptName = "PopupHelpBehavior"; function execute() { Type.registerNamespace('MyACTControls'); MyACTControls.PopupHelpBehavior = function (element) { /// <summary> /// A behavior which displays popup help for a textbox /// </summmary> /// <param name="element" type="Sys.UI.DomElement">The element to attach to</param> MyACTControls.PopupHelpBehavior.initializeBase(this, [element]); this._textbox = Sys.Extended.UI.TextBoxWrapper.get_Wrapper(element); this._cssClass = "ajax__popupHelp"; this._popupBehavior = null; this._popupPosition = Sys.Extended.UI.PositioningMode.BottomLeft; this._popupDiv = null; this._helpText = "Help Text"; this._element$delegates = { focus: Function.createDelegate(this, this._element_onfocus), blur: Function.createDelegate(this, this._element_onblur) }; } MyACTControls.PopupHelpBehavior.prototype = { initialize: function () { MyACTControls.PopupHelpBehavior.callBaseMethod(this, 'initialize'); // Add event handlers for focus and blur var element = this.get_element(); $addHandlers(element, this._element$delegates); }, _ensurePopup: function () { if (!this._popupDiv) { var element = this.get_element(); var id = this.get_id(); this._popupDiv = $common.createElementFromTemplate({ nodeName: "div", properties: { id: id + "_popupDiv" }, cssClasses: ["ajax__popupHelp"] }, element.parentNode); this._popupBehavior = new $create(Sys.Extended.UI.PopupBehavior, { parentElement: element }, {}, {}, this._popupDiv); this._popupBehavior.set_positioningMode(this._popupPosition); } }, get_HelpText: function () { return this._helpText; }, set_HelpText: function (value) { if (this._HelpText != value) { this._helpText = value; this._ensurePopup(); this._popupDiv.innerHTML = value; this.raisePropertyChanged("Text") } }, _element_onfocus: function (e) { this.show(); }, _element_onblur: function (e) { this.hide(); }, show: function () { this._popupBehavior.show(); }, hide: function () { if (this._popupBehavior) { this._popupBehavior.hide(); } }, dispose: function() { var element = this.get_element(); $clearHandlers(element); if (this._popupBehavior) { this._popupBehavior.dispose(); this._popupBehavior = null; } } }; MyACTControls.PopupHelpBehavior.registerClass('MyACTControls.PopupHelpBehavior', Sys.Extended.UI.BehaviorBase); Sys.registerComponent(MyACTControls.PopupHelpBehavior, { name: "popupHelp" }); } // execute if (window.Sys && Sys.loader) { Sys.loader.registerScript(scriptName, ["ExtendedBase", "ExtendedCommon"], execute); } else { execute(); } })(); In the following sections, we’ll discuss how this client-side behavior works. Wrapping the Behavior for the Script Loader The behavior is wrapped with the following script: (function () { // The unique name of the script registered with the // client script loader var scriptName = "PopupHelpBehavior"; function execute() { // Behavior Content } // execute if (window.Sys && Sys.loader) { Sys.loader.registerScript(scriptName, ["ExtendedBase", "ExtendedCommon"], execute); } else { execute(); } })(); This code is required by the Microsoft Ajax Library Script Loader. You need this code if you plan to use a behavior directly from client-side code and you want to use the Script Loader. If you plan to only use your code in the context of the Ajax Control Toolkit then you can leave out this code. Registering a JavaScript Namespace The PopupHelp behavior is declared within a namespace named MyACTControls. In the code above, this namespace is created with the following registerNamespace() method: Type.registerNamespace('MyACTControls'); JavaScript does not have any built-in way of creating namespaces to prevent naming conflicts. The Microsoft Ajax Library extends JavaScript with support for namespaces. You can learn more about the registerNamespace() method here: http://msdn.microsoft.com/en-us/library/bb397723.aspx Creating the Behavior The actual Popup behavior is created with the following code. MyACTControls.PopupHelpBehavior = function (element) { /// <summary> /// A behavior which displays popup help for a textbox /// </summmary> /// <param name="element" type="Sys.UI.DomElement">The element to attach to</param> MyACTControls.PopupHelpBehavior.initializeBase(this, [element]); this._textbox = Sys.Extended.UI.TextBoxWrapper.get_Wrapper(element); this._cssClass = "ajax__popupHelp"; this._popupBehavior = null; this._popupPosition = Sys.Extended.UI.PositioningMode.BottomLeft; this._popupDiv = null; this._helpText = "Help Text"; this._element$delegates = { focus: Function.createDelegate(this, this._element_onfocus), blur: Function.createDelegate(this, this._element_onblur) }; } MyACTControls.PopupHelpBehavior.prototype = { initialize: function () { MyACTControls.PopupHelpBehavior.callBaseMethod(this, 'initialize'); // Add event handlers for focus and blur var element = this.get_element(); $addHandlers(element, this._element$delegates); }, _ensurePopup: function () { if (!this._popupDiv) { var element = this.get_element(); var id = this.get_id(); this._popupDiv = $common.createElementFromTemplate({ nodeName: "div", properties: { id: id + "_popupDiv" }, cssClasses: ["ajax__popupHelp"] }, element.parentNode); this._popupBehavior = new $create(Sys.Extended.UI.PopupBehavior, { parentElement: element }, {}, {}, this._popupDiv); this._popupBehavior.set_positioningMode(this._popupPosition); } }, get_HelpText: function () { return this._helpText; }, set_HelpText: function (value) { if (this._HelpText != value) { this._helpText = value; this._ensurePopup(); this._popupDiv.innerHTML = value; this.raisePropertyChanged("Text") } }, _element_onfocus: function (e) { this.show(); }, _element_onblur: function (e) { this.hide(); }, show: function () { this._popupBehavior.show(); }, hide: function () { if (this._popupBehavior) { this._popupBehavior.hide(); } }, dispose: function() { var element = this.get_element(); $clearHandlers(element); if (this._popupBehavior) { this._popupBehavior.dispose(); this._popupBehavior = null; } } }; The code above has two parts. The first part of the code is used to define the constructor function for the PopupHelp behavior. This is a factory method which returns an instance of a PopupHelp behavior: MyACTControls.PopupHelpBehavior = function (element) { } The second part of the code modified the prototype for the PopupHelp behavior: MyACTControls.PopupHelpBehavior.prototype = { } Any code which is particular to a single instance of the PopupHelp behavior should be placed in the constructor function. For example, the default value of the _helpText field is assigned in the constructor function: this._helpText = "Help Text"; Any code which is shared among all instances of the PopupHelp behavior should be added to the PopupHelp behavior’s prototype. For example, the public HelpText property is added to the prototype: get_HelpText: function () { return this._helpText; }, set_HelpText: function (value) { if (this._HelpText != value) { this._helpText = value; this._ensurePopup(); this._popupDiv.innerHTML = value; this.raisePropertyChanged("Text") } }, Registering a JavaScript Class After you create the PopupHelp behavior, you must register the behavior as a class by using the Microsoft Ajax registerClass() method like this: MyACTControls.PopupHelpBehavior.registerClass('MyACTControls.PopupHelpBehavior', Sys.Extended.UI.BehaviorBase); This call to registerClass() registers PopupHelp behavior as a class which derives from the base Sys.Extended.UI.BehaviorBase class. Like the ExtenderControlBase class on the server side, the BehaviorBase class on the client side contains method used by every behavior. The documentation for the BehaviorBase class can be found here: http://msdn.microsoft.com/en-us/library/bb311020.aspx The most important methods and properties of the BehaviorBase class are the following: dispose() – Use this method to clean up all resources used by your behavior. In the case of the PopupHelp behavior, the dispose() method is used to remote the event handlers created by the behavior and disposed the Popup behavior. get_element() -- Use this property to get the DOM element associated with the behavior. In other words, the DOM element which the behavior extends. get_id() – Use this property to the ID of the current behavior. initialize() – Use this method to initialize the behavior. This method is called after all of the properties are set by the $create() method. Creating Debug and Release Scripts You might have noticed that the PopupHelp behavior uses two scripts named PopupHelpBehavior.js and PopupHelpBehavior.debug.js. However, you never create these two scripts. Instead, you only create a single script named PopupHelpBehavior.pre.js. The pre in PopupHelpBehavior.pre.js stands for preprocessor. When you build the Ajax Control Toolkit (or the sample Visual Studio Solution at the end of this blog entry), a build task named JSBuild generates the PopupHelpBehavior.js release script and PopupHelpBehavior.debug.js debug script automatically. The JSBuild preprocessor supports the following directives: #IF #ELSE #ENDIF #INCLUDE #LOCALIZE #DEFINE #UNDEFINE The preprocessor directives are used to mark code which should only appear in the debug version of the script. The directives are used extensively in the Microsoft Ajax Library. For example, the Microsoft Ajax Library Array.contains() method is created like this: $type.contains = function Array$contains(array, item) { //#if DEBUG var e = Function._validateParams(arguments, [ {name: "array", type: Array, elementMayBeNull: true}, {name: "item", mayBeNull: true} ]); if (e) throw e; //#endif return (indexOf(array, item) >= 0); } Notice that you add each of the preprocessor directives inside a JavaScript comment. The comment prevents Visual Studio from getting confused with its Intellisense. The release version, but not the debug version, of the PopupHelpBehavior script is also minified automatically by the Microsoft Ajax Minifier. The minifier is invoked by a build step in the project file. Conclusion The goal of this blog entry was to explain how you can create custom AJAX Control Toolkit controls. In the first part of this blog entry, you learned how to create the server-side portion of an Ajax Control Toolkit control. You learned how to derive a new control from the ExtenderControlBase class and decorate its properties with the necessary attributes. Next, in the second part of this blog entry, you learned how to create the client-side portion of an Ajax Control Toolkit control by creating a client-side behavior with JavaScript. You learned how to use the methods of the Microsoft Ajax Library to extend your client behavior from the BehaviorBase class. Download the Custom ACT Starter Solution

Read the article

Entity Framework Code-First, OData & Windows Phone Client

- by Jon Galloway

Entity Framework Code-First is the coolest thing since sliced bread, Windows Phone is the hottest thing since Tickle-Me-Elmo and OData is just too great to ignore. As part of the Full Stack project, we wanted to put them together, which turns out to be pretty easy… once you know how. EF Code-First CTP5 is available now and there should be very few breaking changes in the release edition, which is due early in 2011. Note: EF Code-First evolved rapidly and many of the existing documents and blog posts which were written with earlier versions, may now be obsolete or at least misleading. Code-First? With traditional Entity Framework you start with a database and from that you generate “entities” – classes that bridge between the relational database and your object oriented program. With Code-First (Magic-Unicorn) (see Hanselman’s write up and this later write up by Scott Guthrie) the Entity Framework looks at classes you created and says “if I had created these classes, the database would have to have looked like this…” and creates the database for you! By deriving your entity collections from DbSet and exposing them via a class that derives from DbContext, you "turn on" database backing for your POCO with a minimum of code and no hidden designer or configuration files. POCO == Plain Old CLR Objects Your entity objects can be used throughout your applications - in web applications, console applications, Silverlight and Windows Phone applications, etc. In our case, we'll want to read and update data from a Windows Phone client application, so we'll expose the entities through a DataService and hook the Windows Phone client application to that data via proxies. Piece of Pie. Easy as cake. The Demo Architecture To see this at work, we’ll create an ASP.NET/MVC application which will act as the host for our Data Service. We’ll create an incredibly simple data layer using EF Code-First on top of SQLCE4 and we’ll expose the data in a WCF Data Service using the oData protocol. Our Windows Phone 7 client will instantiate the data context via a URI and load the data asynchronously. Setting up the Server project with MVC 3, EF Code First, and SQL CE 4 Create a new application of type ASP.NET MVC 3 and name it DeadSimpleServer. We need to add the latest SQLCE4 and Entity Framework Code First CTP's to our project. Fortunately, NuGet makes that really easy. Open the Package Manager Console (View / Other Windows / Package Manager Console) and type in "Install-Package EFCodeFirst.SqlServerCompact" at the PM> command prompt. Since NuGet handles dependencies for you, you'll see that it installs everything you need to use Entity Framework Code First in your project. PM> install-package EFCodeFirst.SqlServerCompact 'SQLCE (= 4.0.8435.1)' not installed. Attempting to retrieve dependency from source... Done 'EFCodeFirst (= 0.8)' not installed. Attempting to retrieve dependency from source... Done 'WebActivator (= 1.0.0.0)' not installed. Attempting to retrieve dependency from source... Done You are downloading SQLCE from Microsoft, the license agreement to which is available at http://173.203.67.148/licenses/SQLCE/EULA_ENU.rtf. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'SQLCE 4.0.8435.1' You are downloading EFCodeFirst from Microsoft, the license agreement to which is available at http://go.microsoft.com/fwlink/?LinkID=206497. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'EFCodeFirst 0.8' Successfully installed 'WebActivator 1.0.0.0' You are downloading EFCodeFirst.SqlServerCompact from Microsoft, the license agreement to which is available at http://173.203.67.148/licenses/SQLCE/EULA_ENU.rtf. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'EFCodeFirst.SqlServerCompact 0.8' Successfully added 'SQLCE 4.0.8435.1' to EfCodeFirst-CTP5 Successfully added 'EFCodeFirst 0.8' to EfCodeFirst-CTP5 Successfully added 'WebActivator 1.0.0.0' to EfCodeFirst-CTP5 Successfully added 'EFCodeFirst.SqlServerCompact 0.8' to EfCodeFirst-CTP5 Note: We're using SQLCE 4 with Entity Framework here because they work really well together from a development scenario, but you can of course use Entity Framework Code First with other databases supported by Entity framework. Creating The Model using EF Code First Now we can create our model class. Right-click the Models folder and select Add/Class. Name the Class Person.cs and add the following code: using System.Data.Entity; namespace DeadSimpleServer.Models { public class Person { public int ID { get; set; } public string Name { get; set; } } public class PersonContext : DbContext { public DbSet<Person> People { get; set; } } } Notice that the entity class Person has no special interfaces or base class. There's nothing special needed to make it work - it's just a POCO. The context we'll use to access the entities in the application is called PersonContext, but you could name it anything you wanted. The important thing is that it inherits DbContext and contains one or more DbSet which holds our entity collections. Adding Seed Data We need some testing data to expose from our service. The simplest way to get that into our database is to modify the CreateCeDatabaseIfNotExists class in AppStart_SQLCEEntityFramework.cs by adding some seed data to the Seed method: protected virtual void Seed( TContext context ) { var personContext = context as PersonContext; personContext.People.Add( new Person { ID = 1, Name = "George Washington" } ); personContext.People.Add( new Person { ID = 2, Name = "John Adams" } ); personContext.People.Add( new Person { ID = 3, Name = "Thomas Jefferson" } ); personContext.SaveChanges(); } The CreateCeDatabaseIfNotExists class name is pretty self-explanatory - when our DbContext is accessed and the database isn't found, a new one will be created and populated with the data in the Seed method. There's one more step to make that work - we need to uncomment a line in the Start method at the top of of the AppStart_SQLCEEntityFramework class and set the context name, as shown here, public static class AppStart_SQLCEEntityFramework { public static void Start() { DbDatabase.DefaultConnectionFactory = new SqlCeConnectionFactory("System.Data.SqlServerCe.4.0"); // Sets the default database initialization code for working with Sql Server Compact databases // Uncomment this line and replace CONTEXT_NAME with the name of your DbContext if you are // using your DbContext to create and manage your database DbDatabase.SetInitializer(new CreateCeDatabaseIfNotExists<PersonContext>()); } } Now our database and entity framework are set up, so we can expose data via WCF Data Services. Note: This is a bare-bones implementation with no administration screens. If you'd like to see how those are added, check out The Full Stack screencast series. Creating the oData Service using WCF Data Services Add a new WCF Data Service to the project (right-click the project / Add New Item / Web / WCF Data Service). We’ll be exposing all the data as read/write. Remember to reconfigure to control and minimize access as appropriate for your own application. Open the code behind for your service. In our case, the service was called PersonTestDataService.svc so the code behind class file is PersonTestDataService.svc.cs. using System.Data.Services; using System.Data.Services.Common; using System.ServiceModel; using DeadSimpleServer.Models; namespace DeadSimpleServer { [ServiceBehavior( IncludeExceptionDetailInFaults = true )] public class PersonTestDataService : DataService<PersonContext> { // This method is called only once to initialize service-wide policies. public static void InitializeService( DataServiceConfiguration config ) { config.SetEntitySetAccessRule( "*", EntitySetRights.All ); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; config.UseVerboseErrors = true; } } } We're enabling a few additional settings to make it easier to debug if you run into trouble. The ServiceBehavior attribute is set to include exception details in faults, and we're using verbose errors. You can remove both of these when your service is working, as your public production service shouldn't be revealing exception information. You can view the output of the service by running the application and browsing to http://localhost:[portnumber]/PersonTestDataService.svc/: <service xml:base="http://localhost:49786/PersonTestDataService.svc/" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:app="http://www.w3.org/2007/app" xmlns="http://www.w3.org/2007/app"> <workspace> <atom:title>Default</atom:title> <collection href="People"> <atom:title>People</atom:title> </collection> </workspace> </service> This indicates that the service exposes one collection, which is accessible by browsing to http://localhost:[portnumber]/PersonTestDataService.svc/People <?xml version="1.0" encoding="iso-8859-1" standalone="yes"?> <feed xml:base=http://localhost:49786/PersonTestDataService.svc/ xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom"> <title type="text">People</title> <id>http://localhost:49786/PersonTestDataService.svc/People</id> <updated>2010-12-29T01:01:50Z</updated> <link rel="self" title="People" href="People" /> <entry> <id>http://localhost:49786/PersonTestDataService.svc/People(1)</id> <title type="text"></title> <updated>2010-12-29T01:01:50Z</updated> <author> <name /> </author> <link rel="edit" title="Person" href="People(1)" /> <category term="DeadSimpleServer.Models.Person" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" /> <content type="application/xml"> <m:properties> <d:ID m:type="Edm.Int32">1</d:ID> <d:Name>George Washington</d:Name> </m:properties> </content> </entry> <entry> ... </entry> </feed> Let's recap what we've done so far. But enough with services and XML - let's get this into our Windows Phone client application. Creating the DataServiceContext for the Client Use the latest DataSvcUtil.exe from http://odata.codeplex.com. As of today, that's in this download: http://odata.codeplex.com/releases/view/54698 You need to run it with a few options: /uri - This will point to the service URI. In this case, it's http://localhost:59342/PersonTestDataService.svc Pick up the port number from your running server (e.g., the server formerly known as Cassini). /out - This is the DataServiceContext class that will be generated. You can name it whatever you'd like. /Version - should be set to 2.0 /DataServiceCollection - Include this flag to generate collections derived from the DataServiceCollection base, which brings in all the ObservableCollection goodness that handles your INotifyPropertyChanged events for you. Here's the console session from when we ran it: <ListBox x:Name="MainListBox" Margin="0,0,-12,0" ItemsSource="{Binding}" SelectionChanged="MainListBox_SelectionChanged"> Next, to keep things simple, change the Binding on the two TextBlocks within the DataTemplate to Name and ID, <ListBox x:Name="MainListBox" Margin="0,0,-12,0" ItemsSource="{Binding}" SelectionChanged="MainListBox_SelectionChanged"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Margin="0,0,0,17" Width="432"> <TextBlock Text="{Binding Name}" TextWrapping="Wrap" Style="{StaticResource PhoneTextExtraLargeStyle}" /> <TextBlock Text="{Binding ID}" TextWrapping="Wrap" Margin="12,-6,12,0" Style="{StaticResource PhoneTextSubtleStyle}" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Getting The Context In the code-behind you’ll first declare a member variable to hold the context from the Entity Framework. This is named using convention over configuration. The db type is Person and the context is of type PersonContext, You initialize it by providing the URI, in this case using the URL obtained from the Cassini web server, PersonContext context = new PersonContext( new Uri( "http://localhost:49786/PersonTestDataService.svc/" ) ); Create a second member variable of type DataServiceCollection<Person> but do not initialize it, DataServiceCollection<Person> people; In the constructor you’ll initialize the DataServiceCollection using the PersonContext, public MainPage() { InitializeComponent(); people = new DataServiceCollection<Person>( context ); Finally, you’ll load the people collection using the LoadAsync method, passing in the fully specified URI for the People collection in the web service, people.LoadAsync( new Uri( "http://localhost:49786/PersonTestDataService.svc/People" ) ); Note that this method runs asynchronously and when it is finished the people collection is already populated. Thus, since we didn’t need or want to override any of the behavior we don’t implement the LoadCompleted. You can use the LoadCompleted event if you need to do any other UI updates, but you don't need to. The final code is as shown below: using System; using System.Data.Services.Client; using System.Windows; using System.Windows.Controls; using DeadSimpleServer.Models; using Microsoft.Phone.Controls; namespace WindowsPhoneODataTest { public partial class MainPage : PhoneApplicationPage { PersonContext context = new PersonContext( new Uri( "http://localhost:49786/PersonTestDataService.svc/" ) ); DataServiceCollection<Person> people; // Constructor public MainPage() { InitializeComponent(); // Set the data context of the listbox control to the sample data // DataContext = App.ViewModel; people = new DataServiceCollection<Person>( context ); people.LoadAsync( new Uri( "http://localhost:49786/PersonTestDataService.svc/People" ) ); DataContext = people; this.Loaded += new RoutedEventHandler( MainPage_Loaded ); } // Handle selection changed on ListBox private void MainListBox_SelectionChanged( object sender, SelectionChangedEventArgs e ) { // If selected index is -1 (no selection) do nothing if ( MainListBox.SelectedIndex == -1 ) return; // Navigate to the new page NavigationService.Navigate( new Uri( "/DetailsPage.xaml?selectedItem=" + MainListBox.SelectedIndex, UriKind.Relative ) ); // Reset selected index to -1 (no selection) MainListBox.SelectedIndex = -1; } // Load data for the ViewModel Items private void MainPage_Loaded( object sender, RoutedEventArgs e ) { if ( !App.ViewModel.IsDataLoaded ) { App.ViewModel.LoadData(); } } } } With people populated we can set it as the DataContext and run the application; you’ll find that the Name and ID are displayed in the list on the Mainpage. Here's how the pieces in the client fit together: Complete source code available here

Read the article

An Introduction to Meteor

- by Stephen.Walther

The goal of this blog post is to give you a brief introduction to Meteor which is a framework for building Single Page Apps. In this blog entry, I provide a walkthrough of building a simple Movie database app. What is special about Meteor? Meteor has two jaw-dropping features: Live HTML – If you make any changes to the HTML, CSS, JavaScript, or data on the server then every client shows the changes automatically without a browser refresh. For example, if you change the background color of a page to yellow then every open browser will show the new yellow background color without a refresh. Or, if you add a new movie to a collection of movies, then every open browser will display the new movie automatically. With Live HTML, users no longer need a refresh button. Changes to an application happen everywhere automatically without any effort. The Meteor framework handles all of the messy details of keeping all of the clients in sync with the server for you. Latency Compensation – When you modify data on the client, these modifications appear as if they happened on the server without any delay. For example, if you create a new movie then the movie appears instantly. However, that is all an illusion. In the background, Meteor updates the database with the new movie. If, for whatever reason, the movie cannot be added to the database then Meteor removes the movie from the client automatically. Latency compensation is extremely important for creating a responsive web application. You want the user to be able to make instant modifications in the browser and the framework to handle the details of updating the database without slowing down the user. Installing Meteor Meteor is licensed under the open-source MIT license and you can start building production apps with the framework right now. Be warned that Meteor is still in the “early preview” stage. It has not reached a 1.0 release. According to the Meteor FAQ, Meteor will reach version 1.0 in “More than a month, less than a year.” Don’t be scared away by that. You should be aware that, unlike most open source projects, Meteor has financial backing. The Meteor project received an $11.2 million round of financing from Andreessen Horowitz. So, it would be a good bet that this project will reach the 1.0 mark. And, if it doesn’t, the framework as it exists right now is still very powerful. Meteor runs on top of Node.js. You write Meteor apps by writing JavaScript which runs both on the client and on the server. You can build Meteor apps on Windows, Mac, or Linux (Although the support for Windows is still officially unofficial). If you want to install Meteor on Windows then download the MSI from the following URL: http://win.meteor.com/ If you want to install Meteor on Mac/Linux then run the following CURL command from your terminal: curl https://install.meteor.com | /bin/sh Meteor will install all of its dependencies automatically including Node.js. However, I recommend that you install Node.js before installing Meteor by installing Node.js from the following address: http://nodejs.org/ If you let Meteor install Node.js then Meteor won’t install NPM which is the standard package manager for Node.js. If you install Node.js and then you install Meteor then you get NPM automatically. Creating a New Meteor App To get a sense of how Meteor works, I am going to walk through the steps required to create a simple Movie database app. Our app will display a list of movies and contain a form for creating a new movie. The first thing that we need to do is create our new Meteor app. Open a command prompt/terminal window and execute the following command: Meteor create MovieApp After you execute this command, you should see something like the following: Follow the instructions: execute cd MovieApp to change to your MovieApp directory, and run the meteor command. Executing the meteor command starts Meteor on port 3000. Open up your favorite web browser and navigate to http://localhost:3000 and you should see the default Meteor Hello World page: Open up your favorite development environment to see what the Meteor app looks like. Open the MovieApp folder which we just created. Here’s what the MovieApp looks like in Visual Studio 2012: Notice that our MovieApp contains three files named MovieApp.css, MovieApp.html, and MovieApp.js. In other words, it contains a Cascading Style Sheet file, an HTML file, and a JavaScript file. Just for fun, let’s see how the Live HTML feature works. Open up multiple browsers and point each browser at http://localhost:3000. Now, open the MovieApp.html page and modify the text “Hello World!” to “Hello Cruel World!” and save the change. The text in all of the browsers should update automatically without a browser refresh. Pretty amazing, right? Controlling Where JavaScript Executes You write a Meteor app using JavaScript. Some of the JavaScript executes on the client (the browser) and some of the JavaScript executes on the server and some of the JavaScript executes in both places. For a super simple app, you can use the Meteor.isServer and Meteor.isClient properties to control where your JavaScript code executes. For example, the following JavaScript contains a section of code which executes on the server and a section of code which executes in the browser: if (Meteor.isClient) { console.log("Hello Browser!"); } if (Meteor.isServer) { console.log("Hello Server!"); } console.log("Hello Browser and Server!"); When you run the app, the message “Hello Browser!” is written to the browser JavaScript console. The message “Hello Server!” is written to the command/terminal window where you ran Meteor. Finally, the message “Hello Browser and Server!” is execute on both the browser and server and the message appears in both places. For simple apps, using Meteor.isClient and Meteor.isServer to control where JavaScript executes is fine. For more complex apps, you should create separate folders for your server and client code. Here are the folders which you can use in a Meteor app: · client – This folder contains any JavaScript which executes only on the client. · server – This folder contains any JavaScript which executes only on the server. · common – This folder contains any JavaScript code which executes on both the client and server. · lib – This folder contains any JavaScript files which you want to execute before any other JavaScript files. · public – This folder contains static application assets such as images. For the Movie App, we need the client, server, and common folders. Delete the existing MovieApp.js, MovieApp.html, and MovieApp.css files. We will create new files in the right locations later in this walkthrough. Combining HTML, CSS, and JavaScript Files Meteor combines all of your JavaScript files, and all of your Cascading Style Sheet files, and all of your HTML files automatically. If you want to create one humongous JavaScript file which contains all of the code for your app then that is your business. However, if you want to build a more maintainable application, then you should break your JavaScript files into many separate JavaScript files and let Meteor combine them for you. Meteor also combines all of your HTML files into a single file. HTML files are allowed to have the following top-level elements: <head> — All <head> files are combined into a single <head> and served with the initial page load. <body> — All <body> files are combined into a single <body> and served with the initial page load. <template> — All <template> files are compiled into JavaScript templates. Because you are creating a single page app, a Meteor app typically will contain a single HTML file for the <head> and <body> content. However, a Meteor app typically will contain several template files. In other words, all of the interesting stuff happens within the <template> files. Displaying a List of Movies Let me start building the Movie App by displaying a list of movies. In order to display a list of movies, we need to create the following four files: · client\movies.html – Contains the HTML for the <head> and <body> of the page for the Movie app. · client\moviesTemplate.html – Contains the HTML template for displaying the list of movies. · client\movies.js – Contains the JavaScript for supplying data to the moviesTemplate. · server\movies.js – Contains the JavaScript for seeding the database with movies. After you create these files, your folder structure should looks like this: Here’s what the client\movies.html file looks like: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} </body> Notice that it contains <head> and <body> top-level elements. The <body> element includes the moviesTemplate with the syntax {{> moviesTemplate }}. The moviesTemplate is defined in the client/moviesTemplate.html file: <template name="moviesTemplate"> <ul> {{#each movies}} <li> {{title}} </li> {{/each}} </ul> </template> By default, Meteor uses the Handlebars templating library. In the moviesTemplate above, Handlebars is used to loop through each of the movies using {{#each}}…{{/each}} and display the title for each movie using {{title}}. The client\movies.js JavaScript file is used to bind the moviesTemplate to the Movies collection on the client. Here’s what this JavaScript file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; The Movies collection is a client-side proxy for the server-side Movies database collection. Whenever you want to interact with the collection of Movies stored in the database, you use the Movies collection instead of communicating back to the server. The moviesTemplate is bound to the Movies collection by assigning a function to the Template.moviesTemplate.movies property. The function simply returns all of the movies from the Movies collection. The final file which we need is the server-side server\movies.js file: // Declare server Movies collection Movies = new Meteor.Collection("movies"); // Seed the movie database with a few movies Meteor.startup(function () { if (Movies.find().count() == 0) { Movies.insert({ title: "Star Wars", director: "Lucas" }); Movies.insert({ title: "Memento", director: "Nolan" }); Movies.insert({ title: "King Kong", director: "Jackson" }); } }); The server\movies.js file does two things. First, it declares the server-side Meteor Movies collection. When you declare a server-side Meteor collection, a collection is created in the MongoDB database associated with your Meteor app automatically (Meteor uses MongoDB as its database automatically). Second, the server\movies.js file seeds the Movies collection (MongoDB collection) with three movies. Seeding the database gives us some movies to look at when we open the Movies app in a browser. Creating New Movies Let me modify the Movies Database App so that we can add new movies to the database of movies. First, I need to create a new template file – named client\movieForm.html – which contains an HTML form for creating a new movie: <template name="movieForm"> <fieldset> <legend>Add New Movie</legend> <form> <div> <label> Title: <input id="title" /> </label> </div> <div> <label> Director: <input id="director" /> </label> </div> <div> <input type="submit" value="Add Movie" /> </div> </form> </fieldset> </template> In order for the new form to show up, I need to modify the client\movies.html file to include the movieForm.html template. Notice that I added {{> movieForm }} to the client\movies.html file: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} {{> movieForm }} </body> After I make these modifications, our Movie app will display the form: The next step is to handle the submit event for the movie form. Below, I’ve modified the client\movies.js file so that it contains a handler for the submit event raised when you submit the form contained in the movieForm.html template: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Movies.insert(newMovie); } }; The Template.movieForm.events property contains an event map which maps event names to handlers. In this case, I am mapping the form submit event to an anonymous function which handles the event. In the event handler, I am first preventing a postback by calling e.preventDefault(). This is a single page app, no postbacks are allowed! Next, I am grabbing the new movie from the HTML form. I’m taking advantage of the template find() method to retrieve the form field values. Finally, I am calling Movies.insert() to insert the new movie into the Movies collection. Here, I am explicitly inserting the new movie into the client-side Movies collection. Meteor inserts the new movie into the server-side Movies collection behind the scenes. When Meteor inserts the movie into the server-side collection, the new movie is added to the MongoDB database associated with the Movies app automatically. If server-side insertion fails for whatever reasons – for example, your internet connection is lost – then Meteor will remove the movie from the client-side Movies collection automatically. In other words, Meteor takes care of keeping the client Movies collection and the server Movies collection in sync. If you open multiple browsers, and add movies, then you should notice that all of the movies appear on all of the open browser automatically. You don’t need to refresh individual browsers to update the client-side Movies collection. Meteor keeps everything synchronized between the browsers and server for you. Removing the Insecure Module To make it easier to develop and debug a new Meteor app, by default, you can modify the database directly from the client. For example, you can delete all of the data in the database by opening up your browser console window and executing multiple Movies.remove() commands. Obviously, enabling anyone to modify your database from the browser is not a good idea in a production application. Before you make a Meteor app public, you should first run the meteor remove insecure command from a command/terminal window: Running meteor remove insecure removes the insecure package from the Movie app. Unfortunately, it also breaks our Movie app. We’ll get an “Access denied” error in our browser console whenever we try to insert a new movie. No worries. I’ll fix this issue in the next section. Creating Meteor Methods By taking advantage of Meteor Methods, you can create methods which can be invoked on both the client and the server. By taking advantage of Meteor Methods you can: 1. Perform form validation on both the client and the server. For example, even if an evil hacker bypasses your client code, you can still prevent the hacker from submitting an invalid value for a form field by enforcing validation on the server. 2. Simulate database operations on the client but actually perform the operations on the server. Let me show you how we can modify our Movie app so it uses Meteor Methods to insert a new movie. First, we need to create a new file named common\methods.js which contains the definition of our Meteor Methods: Meteor.methods({ addMovie: function (newMovie) { // Perform form validation if (newMovie.title == "") { throw new Meteor.Error(413, "Missing title!"); } if (newMovie.director == "") { throw new Meteor.Error(413, "Missing director!"); } // Insert movie (simulate on client, do it on server) return Movies.insert(newMovie); } }); The addMovie() method is called from both the client and the server. This method does two things. First, it performs some basic validation. If you don’t enter a title or you don’t enter a director then an error is thrown. Second, the addMovie() method inserts the new movie into the Movies collection. When called on the client, inserting the new movie into the Movies collection just updates the collection. When called on the server, inserting the new movie into the Movies collection causes the database (MongoDB) to be updated with the new movie. You must add the common\methods.js file to the common folder so it will get executed on both the client and the server. Our folder structure now looks like this: We actually call the addMovie() method within our client code in the client\movies.js file. Here’s what the updated file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Meteor.call( "addMovie", newMovie, function (err, result) { if (err) { alert("Could not add movie " + err.reason); } } ); } }; The addMovie() method is called – on both the client and the server – by calling the Meteor.call() method. This method accepts the following parameters: · The string name of the method to call. · The data to pass to the method (You can actually pass multiple params for the data if you like). · A callback function to invoke after the method completes. In the JavaScript code above, the addMovie() method is called with the new movie retrieved from the HTML form. The callback checks for an error. If there is an error then the error reason is displayed in an alert (please don’t use alerts for validation errors in a production app because they are ugly!). Summary The goal of this blog post was to provide you with a brief walk through of a simple Meteor app. I showed you how you can create a simple Movie Database app which enables you to display a list of movies and create new movies. I also explained why it is important to remove the Meteor insecure package from a production app. I showed you how to use Meteor Methods to insert data into the database instead of doing it directly from the client. I’m very impressed with the Meteor framework. The support for Live HTML and Latency Compensation are required features for many real world Single Page Apps but implementing these features by hand is not easy. Meteor makes it easy.

Search Results

Search found 5671 results on 227 pages for 'final'.

Page 222/227 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 | Next Page >

- by Julien Lebosquain

- by Michael Stevens

- by guillaume

- by Marko

- by djthoms

- by user1808098

- by Nick Thissen

- by Benchik

- by user1850936

- by solublefish

- by Qanthelas

- by bob moch

- by Tom McDonnell

- by Breck Carter

- by KarmicDice

- by Breck Carter

- by ErikE

- by Emtucifor

- by Blaine

- by sjngm

- by allentown

- by mbcrump

- by Stephen Walther

- by Jon Galloway

- by Stephen.Walther

< Previous Page | 218 219 220 221 222 223 224 225 226 227 | Next Page >