Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 222/262 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

  • Raspberry Pi and Java SE: A Platform for the Masses

    - by Jim Connors
    One of the more exciting developments in the embedded systems world has been the announcement and availability of the Raspberry Pi, a very capable computer that is no bigger than a credit card.  At $35 US, initial demand for the device was so significant, that very long back orders quickly ensued. After months of patiently waiting, mine finally arrived.  Those initial growing pains appear to have been fixed, so availability now should be much more reasonable. At a very high level, here are some of the important specs: Broadcom BCM2835 System on a chip (SoC) ARM1176JZFS, with floating point, running at 700MHz Videocore 4 GPU capable of BluRay quality playback 256Mb RAM 2 USB ports and Ethernet Boots from SD card Linux distributions (e.g. Debian) available So what's taking place taking place with respect to the Java platform and Raspberry Pi? A Java SE Embedded binary suitable for the Raspberry Pi is available for download (Arm v6/7) here.  Note, this is based on the armel architecture, a variety of Arm designed to support floating point through a compatibility library that operates on more platforms, but can hamper performance.  In order to use this Java SE binary, select the available Debian distribution for your Raspberry Pi. The more recent Raspbian distribution is based on the armhf (hard float) architecture, which provides for more efficient hardware-based floating point operations.  However armhf is not binary compatible with armel.  As of the writing of this blog, Java SE Embedded binaries are not yet publicly available for the armhf-based Raspbian distro, but as mentioned in Henrik Stahl's blog, an armhf release is in the works. As demonstrated at the just-completed JavaOne 2012 San Francisco event, the graphics processing unit inside the Raspberry Pi is very capable indeed, and makes for an excellent candidate for JavaFX.  As such, plans also call for a Pi-optimized version of JavaFX in a future release too. A thriving community around the Raspberry Pi has developed at light speed, and as evidenced by the packed attendance at Pi-specific sessions at Java One 2012, the interest in Java for this platform is following suit. So stay tuned for more developments...

    Read the article

  • How to restore Windows7 after restore ubuntu bootloader?

    - by Mateusz Rogulski
    At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

    Read the article

  • Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

    - by razorccatu
    I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

    Read the article

  • Firmware/driver for Broadcom wifi card, PowerBook G4 running Ubuntu 12.04 [duplicate]

    - by user107831
    This question already has an answer here: How to Install Broadcom Wireless Drivers 40 answers This is my first time working with Ubuntu (or Linux), so please be patient. I am running Ubuntu 12.04-powerpc "Precise Pangolin" on a Mac PowerBook G4 with 1.67GHz processor. The firmware/driver for the wifi card is missing. For reasons not worth explaining, I cannot physically plug the computer into the network. I have another computer, a MacBook Pro running OSX, from which I can download files and port them by USB thumb drive. The wifi card in the PowerBook G4 is by Broadcom. The chip is BCM4306, rev. 3. The PCI number is 14e4:4302. I have downloaded b43-fwcutter_015-14_powerpc.deb and dropped it into the Home folder on the Ubuntu machine. However, it will not install. When I double-click, it opens with Ubuntu SoftwareCenter, but the "Install" button is inactive: I can't click it. There's a message beside the inactive button saying, "An older version of 'b43-fwcutter' is available in your normal software channels. Only install this file if you trust the origin." If I "right-click" the .deb file and open with Archive Manager, it shows me the "DEBIAN" and "usr" folders, but I'm unsure what to do from there...and fairly certain this is not the right way to do things. Maybe I have the wrong version of b43-fwcutter for my machine/version of Ubuntu? The documentation for this problem is a mess. It refers to all sorts of out-of-date Ubuntu versions and to an array of different "cutter" and firmware files. Maybe I'd be able to figure this out if I were a more seasoned Ubuntu user, but I have no idea why Sofware Center won't let me do the install. I would be VERY grateful for an explanation of how to get the wifi card working on this machine again. Thank you!

    Read the article

  • Museum of Modern Art Starts Video Game Collection; Acquires Myst, Pac-Man, and More

    - by Jason Fitzpatrick
    The Museum of Modern Art is weighing in on the video-games-as-art debate by starting a collection of iconic video games and putting them up for public display. Read on to see what games are included in the initial batch and the MoMA’s reasons behind starting a video game collection. Although the MoMA is slated to grow to over 40 titles, the seed batch is 14 titles including: Pac-Man, Tetris, Sim City 2000, Myst, Portal, and Dwarf Fortress. In the announcement they explain the motivation for building a video game collection: Are video games art? They sure are, but they are also design, and a design approach is what we chose for this new foray into this universe. The games are selected as outstanding examples of interaction design—a field that MoMA has already explored and collected extensively, and one of the most important and oft-discussed expressions of contemporary design creativity. Our criteria, therefore, emphasize not only the visual quality and aesthetic experience of each game, but also the many other aspects—from the elegance of the code to the design of the player’s behavior—that pertain to interaction design. In order to develop an even stronger curatorial stance, over the past year and a half we have sought the advice of scholars, digital conservation and legal experts, historians, and critics, all of whom helped us refine not only the criteria and the wish list, but also the issues of acquisition, display, and conservation of digital artifacts that are made even more complex by the games’ interactive nature. This acquisition allows the Museum to study, preserve, and exhibit video games as part of its Architecture and Design collection. The above quote is only a small snippet of a much lengthier look at the benefits of examining and preserving video games, hit up the link below to check out the full post including future titles the MoMA would like to include in their archive. Video Games: 14 in the Collection, for Starters [Inside/Out] How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

    Read the article

  • Fixing Windows7 Bootmgr

    - by Ashfame
    I made my laptop Dell XPS 15z dual boot with Ubuntu last year, and something went wrong & BOOTMGR of my windows got fried. I couldn't fix it that time. And I kept using Ubuntu. I don't even remember whether I installed directly via a live usb or used wubi, sorry. I installed 11.10 at that point of time, but right now I am on 12.10. Today, I got to know about the Boot repair tool, so I was wondering with this tool may be I can figure out what's exactly wrong with my setup. This is my Boot info - http://paste.ubuntu.com/1343575/ If I select the Win7 entry on GRUB2, I get the error BOOTMGR is missing. Press Ctrl-Alt-Del. Now the thing is I have read numerous links on how this could be fixed, but I don't feel comfortable without knowing what I am doing. So unless I am sure what a certain tool would do, I would prefer fixing it by hand (manually editing files). So reading from my boot info file, can anyone explain it to me what's messed up wrong here and what could fix it? I certainly can't afford to have my ubuntu install unbootable right now, but looking into this issue is bothering me too much. Help appreciated! I have Win7 DVD & Ubuntu live USBs with me, I am just looking for a sure shot way of fixing Win7 without any harm to my existing Ubuntu install.

    Read the article

  • Broke Ubuntu 12.04 either with Screencloud or Ubuntu Tweak

    - by pgrytdal
    Earlier today I installed the Screen Shot app "Screencloud" and after the installation Firefox was having problems. I didn't think much about it, just closed Firefox, then proceeded to change the toolbar opacity on Ubuntu Tweak. After restarting my system, hoping it would fix Firefox (because, you know, restarting fixes everything ;) ) I am able to go to the Log In Screen, type in my password, but then I get 3 errors regarding the Screencloud Ubuntu One, Imgur, and Dropbox plugins. After clicking the "Okay" on all three errors, all I see is my wallpaper. I am not able to access the terminal VIA CtrlAltT, but I am able to log out VIA CtrlAltDelete. I have tried all desktop environments I have installed (that, except for Unity 2D, has to do with Cairo Dock.) I hope I have provided enough information. If you need more, please ask. Please help! I would like to not have to re-install Ubuntu. Other info: OS: Ubuntu 12.04 I also have a Ubuntu 12.10 Live USB, but Ubuntu 12.10 hasn't run very well on any of my computers.

    Read the article

  • Accessing second hard drive

    - by Jonathan
    Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

    Read the article

  • How do I create an encrypted file system inside a file?

    - by darent
    Recently i've found this interesting tutorial: http://flossstuff.wordpress.com/2011/08/07/using-a-file-as-a-storage-device/ It explains how to create an empty file, format it as ext4, and mount it as a device. I'd like to know if it can be created as an encrypted ext4 file system. I've tried using palimpsest (the disk utility found in System menu) to format the already created file system but it doesn't works as it detects the file system being used. If I try to unmount the file system, it won't work neither because it doesn't detect the device (since it's not a real device like a hardrive or a usb drive). So my question is, is there an option to create the file system encrypted from the begining? I've used these commands: Create an empty file 200Mb size: dd if=/dev/zero of=/path/to/file bs=1M count=200 Make it ext4: mkfs -t ext4 file Mount it in a folder inside my home: sudo mount -o loop file /path/to/mount_point Is there any way the mkfs command creates the ext4 encrypted asking for a decryption password? I'm planing to use this as a way to encrypt files inside Dropbox. Thanks for your time.

    Read the article

  • How do I get a Belkin F5D8053 wireless adapter working?

    - by disassembler
    I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

    Read the article

  • Touchpad stopped working on an Acer AspireOne D255E

    - by Gustavo
    I have a less than a year old Acer AspireOne D255E with a fresh install of Ubuntu 11.10. Everything has been working fine. Great OS and great netbook. But today the touchpad stopped working. It had been working fine. I closed the netbook and when I opened it again, a couple of hours later, I could not move the pointer with the touchpad. I can not get the pointer to move. I cleaned the touchpad surface well, just in case. Everything else is working fine. All the software updates are up-to-date. I have rebooted several times with no solution. I have attached an USB mouse and the pointer works well. What can I do to troubleshoot the problem? I have gone to the System Settings, touchpad section, and there is not much that I can do there. I would like to determine first if it is a hardware or software issue and then how to resolve it. Is there a way that I can reinstall the touchpad drivers. just in case it is a software problem? I have been using Ubuntu for nearly a year now and am very happy with it. Are there any wise Ubuntu gurus out there who can help me? Thank you for reading this note.

    Read the article

  • How to migrate user settings and data to new machine?

    - by torbengb
    I'm new to Ubuntu and recently started using it on my PC. I'm going to replace that PC with a new machine. I want to transfer my data and settings to the nettop. What aspects should I consider? Obviously I want to move my data over. What things am I missing if I only copy the entire home folder? This is a home pc (not corporate) so user rights and other security issues are not a concern, except that the files should be accessible on the new machine! Please take into account that the new machine is a nettop that doesn't have an optical drive and doesn't allow me to hook the old SATA disk into it, so any data transfer must be handled via home network (I can have both the old and the new machine turned on and connected to the home LAN) and I have an USB thumbdrive with limited capacity (2GB). This sounds like it might limit the general applicability, but it would in fact make it more general. I'll make this a wiki topic because there could be several "right" answers. Update: Or so I thought. I don't see a choice for that.

    Read the article

  • recent unreliable wireless connection on 10.04 and 10.10

    - by gabkdlly
    Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

    Read the article

  • ubi-partman failed with exit code 10 during 12.10 fresh install

    - by Austen
    ive been trying to install ubuntu 12.10 on my acer aspire one 534h,using an iso from the official site and a 16gb flash drive using unetbootin. my aa1 is running factory settings (xp). it will boot fine from the usb, but the installation throws the error in the title after choosing my wifi options, and contineus to give the error after every subsequent step. after trying to complete the installation ingoring the error, it hangs on the ask ubuntu screen. ive tried reformatting and reflashing (sorry, heavy android user) ubuntu to the flash drive, to no avail... do i need to format somthing else, or is it something to do with th Hdd and RAID drives? ive looked in my BIOS and found nothing related. only the option for sata or ide... any help would be great, as ive been working at this all day... edit: the error message was ubi-partman has failed with exit code 10. see (gave a directory) for more info. it then informed me that if i continued the install could be incomplete or completly broken. not sure abouth the wording in the second part, but the error is word for word... thank you.

    Read the article

  • Read only file system error on ubuntu after partitioning

    - by Ranjith R
    I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

    Read the article

  • How do I install 10.04 on a Vortex86DX embdedded system?

    - by mathematician1975
    I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

    Read the article

  • Ubuntu 13.04 client cannot connect to Raspbian samba share

    - by envoyweb
    I have a client Ubuntu 13.04 machine trying to connect to a server running Raspbian with samba and samba-common-bin installed on the server I can see my share and when I try to login I get this error: Unable to access location: Failed to write windows share Cannot allocate memory. I have installed ntfs-3g for the usb hard drive that already auto mounts on the server so I never had to create a directory or edit fstab. Testparm on the server states the following: [global] workgroup = ENVOYWEB server string = %h server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [homes] comment = Home Directories valid users = %S create mask = 0700 directory mask = 0700 browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [BigDude] comment = Sharing BigDude's Files path = /media/BigDude/ valid users = @users read only = No create mask = 0755 testparm on the client which is running ubuntu is as follows [global] workgroup = ENVOYWEB server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers

    Read the article

  • Encrypt SSD or not?

    - by JamesBradbury
    My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

    Read the article

  • How to view/mount other partitions on your hard drive

    - by Preston Zacharias
    Recently I have installed Ubuntu 12.04 Beta 2 on a USB flash drive and decided to install it on an old external HDD which I have taken out of the casing and succesfully mounted in my desktop computer. There is no other operating system besides the newly install Ubuntu. However, there is about 500gb of data on the drive. This is why i used a partitioning software on my windows 7 netbook to partition the hard drive to set aside 1tb for files, 350gb of space for linux and the remaining 650gb for Vista which i plan on installing soon. But this is where the problem sets in...when installing Ubuntu it does not recognize that the drive is partitioned at all, it's just one big open block of space...so I used the installers built in partitioning feature to set aside 300gb for main Ubuntu install and 50gb for swap space. I set both of these partitions to be created at the "end" so that it wouldn't delete or write over my data. And this is where i am really lost; when booting into Ubuntu i am able to use it perfectly fine, got on internet, etc...but i have NO CLUE as to how i can view files that were previously on the drive (all of my data that i had prior to install). How can I mount/be able to view the other partition so that i can have access to my data? Thank you ahead of time! I REALLY appreciate any help or advice! ~Preston

    Read the article

  • OpenWorld: Our (Road) Maps are Looking Good!

    - by Tony Berk
    Wow, only one (or two) days down at Oracle OpenWorld! Are you on overload yet? I'm still trying to figure out how to be in 3 sessions at the same time... I guess everyone needs to prioritize! There was a lot to see in Monday's sessions, especially some great forward-looking roadmap sessions. In case you aren't here or you decided to go to other sessions, this is my quick summary of what I could capture from a couple of the roadmaps: In the Fusion CRM Strategy and Roadmap session, Anthony Lye provided an overview of the Fusion CRM strategy including the key design principles of 3 E's: Easy, Effective and Efficient. After an overview of how Oracle has deployed Fusion CRM internally to 25,000 users worldwide, Anthony discussed the features coming in the next release, the releases in the next 12 months and beyond. I can't detail too much since you haven't read Oracle's Safe Harbor statement, but check out Fusion Tap and look for new features and added functionality for sales prediction, marketing, social and integration with a number of the key Customer Experience products.  In the Oracle RightNow CX Cloud Service Vision and Roadmap session, Chris Hamilton presented the focus areas for the RightNow product. As a result of the large increase in development resources after the acquisition, the RightNow CX team is planning a lot of enhancements to the functionality, infrastructure and integrations. As a key piece of the Oracle Customer Experience (CX) strategy, RightNow will be integrated with Oracle Social Network, Oracle Commerce (ATG and Endeca), Oracle Knowledge, Oracle Policy Automation and, of course, further integration with Fusion Sales and Marketing. Look forward to seeing more on the Virtual Assistant, Smart Interaction Hub and Mobility. In addition to the roadmaps, I was looking forward to hearing from Oracle CRM customers. So, I sat in on two great Siebel customer panels: The Maximizing User Adoption Rates for Siebel Sales and Siebel Partner Relationship Management panel consisted of speakers from CSL Behring, McKesson and Intuit. It was great to get an overview of implementations for both B2B and B2C companies. It was great hearing that all of these companies have more than 1,000 sales users (Intuit has 4,000) and how the 360 degree view of the customer in Siebel is helping these customers improve their customers' experience (CX). They are all great examples of centralized implementations which have standardized processes across the globe and across business units.  Waste Management, Farmers Insurance and the US Citizenship & Immigration Services presented in the Driving Great Customer Experiences with Siebel Service Applications session. Talk about serving large customer bases! Is it possible that Farmers with only 10 million households is the smallest of these 3? All of them provided great examples of how they are improving the customer experience (CX) including 60-70% improvements in efficiency or reducing the number of applications the customer service reps (CSRs) need to use from 10 to 1 (Waste Management) and context aware call transfers to avoid the caller explaining their issue 3 times (USCIS). So that's my wrap up of only 4 sessions from Monday. In between sessions, I stopped by the Oracle DEMOgrounds and CRM Pavilion to visit with a group of great partners and see the products and partner integrations in action. Don't miss a recap of Mark Hurd's Keynote. I can't believe there were another 40+ sessions covering CRM, Fusion, Cloud, etc. that I missed today! Anyone else see any great sessions?

    Read the article

  • Boot ubuntu 12.04 in 3D - nomodeset quiet splash install

    - by rahi
    I would like to enable 3D in Ubuntu 12.04. I recently tried to install ubuntu on a new computer. When the installation was complete and I rebooted the machine, I could only see a blank screen. After some searching, I followed this tutorial which instructed me to boot with "nomodeset" enabled. I choose this on the USB I was installing ubuntu 12.04 from. Fortunately, the ubuntu installation on the new computer was successful. When I tried to change the size of the unity launcher icons, I did not see that option (as I see on my other computer running ubuntu 12.04). I tried installing MyUnity and it told me that the computer I had just installed 12.04 to was running in 2D. To my knowledge. all the software is up to date (as I ran the Software Updater). In addition, when I look for Additional Drivers, I see a message that says "No proprietary drivers are in use on this system". When I look under System Details Graphics, I see the Driver as "VESA:Intel Sandybridge/Ivybridge Graphics. When I hold the shift key on when my machine boots up, and type "e" on the Grub menu, I see the following towards the end, "nomodeset quiet splash $vt_handoff". Does this have anything to do with the plain 2D ubuntu 12.04 experience? Again, what I'd like to do now is get the 3D experience on my new machine running 12.04. Please let me know if you need more information.

    Read the article

  • The Future of Air Travel: Intelligence and Automation

    - by BobEvans
    Remember those white-knuckle flights through stormy weather where unexpected plunges in altitude result in near-permanent relocations of major internal organs? Perhaps there’s a better way, according to a recent Wall Street Journal article: “Pilots of a Honeywell International Inc. test plane stayed on their initial flight path, relying on the company's latest onboard radar technology to steer through the worst of the weather. The specially outfitted Boeing 757 barely shuddered as it gingerly skirted some of the most ferocious storm cells over Fort Walton Beach and then climbed above the rest in zero visibility.” Or how about the multifaceted check-in process, which might not wreak havoc on liver location but nevertheless makes you wonder if you’ve been trapped in some sort of covert psychological-stress test? Another WSJ article, called “The Self-Service Airport,” says there’s reason for hope there as well: “Airlines are laying the groundwork for the next big step in the airport experience: a trip from the curb to the plane without interacting with a single airline employee. At the airport of the near future, ‘your first interaction could be with a flight attendant,’ said Ben Minicucci, chief operating officer of Alaska Airlines, a unit of Alaska Air Group Inc.” And in the topsy-turvy world of air travel, it’s not just the passengers who’ve been experiencing bumpy rides: the airlines themselves are grappling with a range of challenges—some beyond their control, some not—that make profitability increasingly elusive in spite of heavy demand for their services. A recent piece in The Economist illustrates one of the mega-challenges confronting the airline industry via a striking set of contrasting and very large numbers: while the airlines pay $7 billion per year to third-party computerized reservation services, the airlines themselves earn a collective profit of only $3 billion per year. In that context, the anecdotes above point unmistakably to the future that airlines must pursue if they hope to be able to manage some of the factors outside of their control (e.g., weather) as well as all of those within their control (operating expenses, end-to-end visibility, safety, load optimization, etc.): more intelligence, more automation, more interconnectedness, and more real-time awareness of every facet of their operations. Those moves will benefit both passengers and the air carriers, says the WSJ piece on The Self-Service Airport: “Airlines say the advanced technology will quicken the airport experience for seasoned travelers—shaving a minute or two from the checked-baggage process alone—while freeing airline employees to focus on fliers with questions. ‘It's more about throughput with the resources you have than getting rid of humans,’ said Andrew O'Connor, director of airport solutions at Geneva-based airline IT provider SITA.” Oracle’s attempting to help airlines gain control over these challenges by blending together a range of its technologies into a solution called the Oracle Airline Data Model, which suggests the following steps: • To retain and grow their customer base, airlines need to focus on the customer experience. • To personalize and differentiate the customer experience, airlines need to effectively manage their passenger data. • The Oracle Airline Data Model can help airlines jump-start their customer-experience initiatives by consolidating passenger data into a customer data hub that drives realtime business intelligence and strategic customer insight. • Oracle’s Airline Data Model brings together multiple types of data that can jumpstart your data-warehousing project with rich out-of-the-box functionality. • Oracle’s Intelligent Warehouse for Airlines brings together the powerful capabilities of Oracle Exadata and the Oracle Airline Data Model to give you real-time strategic insights into passenger demand, revenues, sales channels and your flight network. The airline industry aside, the bullet points above offer a broad strategic outline for just about any industry because the customer experience is becoming pre-eminent in each and there is simply no way to deliver world-class customer experiences unless a company can capture, manage, and analyze all of the relevant data in real-time. I’ll leave you with two thoughts from the WSJ article about the new in-flight radar system from Honeywell: first, studies show that a single episode of serious turbulence can wrack up $150,000 in additional costs for an airline—so, it certainly behooves the carriers to gain the intelligence to avoid turbulence as much as possible. And second, it’s back to that top-priority customer-experience thing and the value that ever-increasing levels of intelligence can deliver. As the article says: “In the cabin, reporters watched screens showing the most intense parts of the nearly 10-mile wide storm, which churned some 7,000 feet below, in vibrant red and other colors. The screens also were filled with tiny symbols depicting likely locations of lightning and hail, which can damage planes and wreak havoc on the nerves of white-knuckle flyers.”  (Bob Evans is senior vice-president, communications, for Oracle.)  

    Read the article

  • Passed: Exam 70-480: Programming in HTML5 with JavaScript and CSS3

    First off: Mission accomplished successfully. And it was fun! Using the resources listed in my previous article about Learning Content, I'd like to thank Microsoft Technical Evangelists Jeremy Foster and Michael Palermo for their excellent jump start videos on Channel 9, and the various authors at Pluralsight. Local Prometric testing centre Back in November I chose a local testing centre which was the easiest to access from my office despite the horrible traffic you might experience here on the island. Actually, it was not the closest one. But due to their website, their awards as Microsoft Learning Center, and my general curiosity about the premises, I gave FRCI my priority. Boy, how should I regret this decision this morning... The official Prometric exam guide asks any attendee to show up at least 30 minutes prior to the scheduled time of the test. Well, this should have been the easier part but unfortunately due to heavier traffic than usual I arrived only 20 minutes before time. Not too bad but more to come. The building called 'le Hub' is nicely renovated and provides the right environment for an IT group of companies like FRCI. I think they have currently 5 independent IT departments over there. Even the handling at the reception was straight forward, welcoming and at my ease. But then... first shock: "We don't have any exam registration for today." - Hm, that's nice... Here's my mail confirmation from Prometric. First attack successfully handled and the lady went off again to check their records. Next shock: A couple of minutes later, another guy tries to explain me that "the staff of the testing centre is already on vacation and the centre is officially closed." - Are you kidding me? Here's the official confirmation by Prometric, and I don't find it funny that I take a day off today only to hear this kind of blubbering nonsense. I thought that I'll be on the safe side choosing a company with a good reputation here on the island. Another 40 (!) minutes later, they finally come back to the waiting area with a pre-filled form about the test appointment. And finally, after an hour of waiting, discussing, restarting the testing PC, and lots of talk, I am allowed to sit down and take the exam. Exam details Well, you know the rules. Signing an NDA doesn't allow me to provide you any details about the questions or topics that have been covered. Please check out the official exam description, and you're on the right way. Sorry, guys... ;-) The result "Congratulations! You have passed this Microsoft Certification exam." - In general, I have to admit that the parts on HTML5 and CSS3 were the easiest after all, and that I have to get myself a little bit more familiar with certain Javascript features like class definitions, inheritance and data security. Anyway, exam passed - who cares about the details? Next goal Of course, the journey to Microsoft Certifications continues and my next goal is to pass exams 70-481 - Essentials of Developing Windows Store Apps using HTML5 and JavaScript and 70-482 - Advanced Windows Store App Development using HTML5 and JavaScript. This would allow me to achieve the certification of MCSD: Windows Store Apps using HTML5. I guess, during 2013 I'll be busy with various learning and teaching lessons.

    Read the article

  • Using Mercurial repository inside a Git one: Feasible? Sane?

    - by Portablejim
    I am thinking on creating a Mercurial repository under a Git repository. e.g. ..../git-repository/directory/hg-repo/ The 2 repositories Is it possible to manage (keeping your sanity)? How similiar is it to this? I am a computer science student at University. I manage my work in Git, mainly as a distribution mechanism (after realizing that rsync fails when you have changes in more than one place) between my desktop and usb drive. I try use of Git as a VCS as I do work. I have finished a semester where I did a small group project to prepare for a larger group project next year. We had to use Subversion, and experienced the joys of a centralised VCS (including downtime). I tried to keep the subversion repository separate to my Git repository for the subject**, however it was annoying that it was seperate (not in the place where I store assignments). I therefore moved to using an Subversion repository inside my Git repository. As I think ahead (maybe I am thinking too far ahead) I realise that I will have to try and convince people to use a DVCS and Mercurial will probably be the one that is preferred (Windows and Mac GUI support, closer to Subversion). Having done some research into the whole Git vs Mercurial debate (however not used Mercurial at all) I still prefer Git. Can I have a Mercurial repository inside a Git one without going mad (or it ruining something)? Or is it something that I should not consider at all? (Or is it a bad question that should be deleted?) ** I think outside of Australia it is called a course

    Read the article

  • HP Pavilion 15 with AMD dual graphics - Ubuntu live environment not starting

    - by creepus
    I've had this laptop for about a day now and have decided to try Ubuntu on it and determine if I want to install it. I created a USB, it booted (Secure Boot was on, I tried with Secure Boot off to no effect), and then the problem occurred. The screen turned off for a second, turned back on to a black screen, shut off again and turned back on with a dialogue box telling me that the system had to use low-graphics mode. I clicked OK, selected low-graphics mode from the menu and clicked OK. The screen switched to the boot messages and did not go any further than this. Ctrl+Alt+DEL started rebooting the laptop though. I tried booting again, but this time I edited the boot options in GRUB to add nomodeset. This time, the laptop only booted to a black screen. Ctrl+Alt+F2 took me to a prompt, I tried startx from there, but X didn't start, complaining that it wanted kernel mode setting back. I can not seem to find any option to disable one graphics chip or the other in the UEFI setup menus. Laptop : HP Pavilion 15-E004AU. The CPU : AMD A6-4400M APU with Radeon(tm) HD Graphics The graphics chip : AMD Radeon HD 7520G + 8670M Dual Graphics. The Ubuntu version : 13.10, 64 bit. Thanks. EDIT: I tried 12.04.3 LTS, it managed to bring the desktop up. There are severe graphics glitches after about two minutes though.

    Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >