Search Results

Search found 10005 results on 401 pages for 'regex trouble'.

Page 223/401 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Office 2007 install limits?

  - by AppsByAaron

  I've been able to install Office 2003 on a couple of computers that I own without any trouble. However, I just got office 2007 and I'm not able to install it on my computer and my laptop. I know this may violate agreements and whatnot but I'm curious to know if this is something that Microsoft has finally started to crack down on or what. Any information is help full. And I know that I'm going to get a few answers telling me that I'm "stealing" or whatever so I don't need to hear about that. thanks. ;)

  Read the article

• Text comparison utility

  - by Aaron

  I know this has been asked before...but I have a spin as I have been trying out varying free software offerings. I want to rid out department of DiffDoc the problem is that I am having trouble locating something that will do what we need. WinMerge has been the latest attempt... The problem is simple. One Word doc...one PDF with a portion of it containing the text to be compared against. Compare them and be done. Raw text, ignore whitespace, ignore carriage returns, etc... Just compare the text and give me the results in some sort of report. NOTE: Have tried ExamDiff, kdiff3, Tortoise, and a few others...

  Read the article

• Unable to validate e-mail format

  - by Aishwarya Shiva Pareek

  I am using this code which was suggested by my friend to validate an email id format in C#. public bool IsValidEmail(string strIn) { string strPattern = "^([0-9a-zA-Z]([-.\\w]*[0-9a-zA-Z])*@([0-9a-zA-Z][-\\w]*[0-9a-zA-Z]\\.)+[a-zA-Z]{2,9})$"; if (System.Text.RegularExpressions.Regex.IsMatch(strIn, strPattern)) { return true; } return false; } When I pass the value of the strIn as [email protected] This function returns false. Please tell me whats wrong with it?

  Read the article

• .htaccess redirect - Is it secure?

  - by thecrandallster

  This works; I'm not having trouble, but I want to be certain that this is bulletproof. I came up with a neat little .htaccess redirect, but I am not sure if it is secure; do you know? <IfModule mod_rewrite.c     RewriteEngine On     RewriteRule ^goto/([a-z]+)/?$ /$1/ [R] </IfModule I think as long as the server is configured correctly and the files handle authentication autonomously, then it shouldn't be a security issue. Also, being that the rewrite rule only works with characters a-z and one slash I doubt they could jump around directories by injecting stuff into the URL I think...

  Read the article

• HP Officejet 6000 E609n unexpectedly goes offline

  - by Sajee

  My local library has a number of Windows Vista SP1 PCs connected to two HP Officejet 6000 E609n wireless printers. Each PC can print to either of the two printers and one of the two printers is the default on each PC. This configuration has worked well over the last year w/o any trouble. Recently, the library staff is reporting that sometimes when patrons try to print, they can't. Closer inspection shows that the the default wireless printer is offline. In order to get the printer online again, the printer has to be restarted. In Control Panel Printers applet, under the Printer menu, the "Use Printer Offline" option is grayed out and there's no way to bring the printer back online w/o restarting it. Does anyone know what's going on here?

  Read the article

• How to run "mongodb --repair" if it's an Upstart job?

  - by Wolfram Arnold

  My MongoDB server died. The log says something about an unclean shutdown and an existing mongodb.lock file. It recommends to remove the lock file, then restart the mongodb server with --repair. However, on my system (Ubuntu 10.10), I've installed MongoDB via an apt-get package, and it's set up as Upstart job. If I run mongodb from the command line, it won't find the data, none of the paths are set correctly. Surely, I could read the man page, try to emulate what Upstart would do, give it all the correct parameters plus --repair but that seems like a lot of trouble. There must be a simpler way, that's not fighting Upstart. What is it?

  Read the article

• Dependency issue when installing some packages with apt

  - by Julien Genestoux

  We have a little trouble installing some php5-* packages. I am reallt not sure what is going on. We have the latest version of php5-common. # apt-get install php5-mcrypt Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-mcrypt: Depends: php5-common (= 5.2.6.dfsg.1-1+lenny16) but 5.2.11-0.dotdeb.0 is to be installed E: Broken packages We get similar error with many other php5-* packages, like php5-imap.

  Read the article

• Sendmail relay out of Amazon EC2?

  - by Stephen Belanger

  I have a site running on CentOS 5.4 through Amazon EC2. Unfortunately, Amazon has had nothing but trouble with their entire IP range getting black listed from spam tracking services regularly. I need a mail server, so I setup an smtp server elsewhere that I want to send to, but I can't just send directly to it through PHP because the direct smtp request is way too slow. What I want to do is relay through sendmail, but I've never used sendmail before, so I have no idea how to configure it. All I want is for all emails sent from localhost to be relayed to one specific external server, but I don't know how to do that. I tried to find a tutorial online, but couldn't find anything that was particularly clear as to how I go about doing that. Can anyone help me out?

  Read the article

• Importing Omnigraffle drawings into a NeoOffice document

  - by Greg Harman

  What is the best way to import an Omnigraffle drawing into a NeoOffice document? I expect the document to change over time, and I may need to update the drawing later, so I'd like a way to make that happen painlessly. Currently, I export the drawing to a .jpg and then import that in NeoOffice with Insert-Picture-From File... but that's an extra step and extra file to maintain (the intermediate .jpg) and the frame that NeoOffice puts the image in always gives me trouble when I try to update the image with a new one.

  Read the article

• MS SQL replace sequence of same characters inside Text Field (TSQL only)

  - by zmische

  I have a text column varchar(4000) with text: 'aaabbaaacbaaaccc' and I need to remove all duplicated chars - so only one from sequence left: 'abacbac' It should not be a function, Procedure or CLR - Regex solution. Only true SQL select. Currently I think about using recursive WITH clause with replace 'aa'-'a', 'bb'-'b', 'cc'-'c'. So recursion should cycle until all duplicated sequences of that chars would be replaced. DO you have another solution, perhaps more Permormant one? PS: I searched through this site about different replace examples - they didnt suit to this case.

  Read the article

• Undeliverable messages to newly migrated Exchange user

  - by johnnyb10

  We are in the process of migrating from our old domain to a new one, part of which involves migrating mailboxes from Exchange 2003 to Exchange 2007. A bunch of users have been migrated already without problems. However, one of the users is having trouble receiving emails from others. When someone sends to him, they get an Undeliverable NDR that says "A configuration error in the e-mail system caused the message to bounce between two servers or to be forwarded between two recipients." The message shows the user's distinguished name as /OU=OurDomain/CN=Recipients/CN=USER57137172. The user's account name should just be "USER", so I don't know where the extra numbers ("57137172") are coming from. Thanks in advance.

  Read the article

• multiple vlans routed on one nic? trunk?General? or Access?

  - by Aceth

  ok for the last week I've tried racking my head around this... I have a SRW208P with 802.1q support, and a virtual endian appliance. I would like to be able to have 3 vlans having everything routed through the endian appliance.. i.e. The Virtual server has 2 bridged NIC's to the switch. This is where I'm getting confused .. On the 8 port switch I've got the 3 vlans set up ok (all being untagged as they are not going to be vlan aware), it's the port I'm connecting the endian firewall to the switch I'm having trouble with (second nic goes to the adsl modem and NAT'd) Is it meant to be a trunk, "Genereal" or "Access" then untagged or tagged? the end goal is to have vlan traffic routing through the single NIC and have endian route vlan traffic according to the rules. Any one have any ideas on the cisco small business stuff? Thanks

  Read the article

• .NET Reflector and getters/setters issue

  - by Humberto

  I'm using an up-to-date .NET Reflector to disassemble an internal legacy app whose source code is almost impossible to recover. I need to find the cause of a nasty bug, and then possibly patch it. Reflector did a good job as usual in the re-creation of the project's structure, but soon I discovered that every property call was left "expanded" to its get_() and set_() method signatures, rendering the source code impossible to compile. A quick Visual Studio "Search/Replace" with regex solved these cases, but it's awkward. Is there a way to make Reflector behave correctly?

  Read the article

• openldap proxied authorization

  - by bemace

  I'm having some trouble doing updates with proxied authorization (searches seem to work fine). I'm using UnboundID's LDAP SDK to connect to OpenLDAP, and sending a ProxiedAuthorizationV2RequestControl for dn: uid=me,dc=People,dc=example,dc=com with the update. I've tested and verified that the target user has permission to perform the operation, but I get insufficient access rights when I try to do it via proxy auth. I've configured olcAuthzPolicy=both in cn=config and authzTo={0}ldap:///dc=people,dc=example,dc=com??subordinate?(objectClass=inetOrgPerson) on the original user. The authzTo seems to be working; when I change it I get not authorized to assume identity when I try the update (also for searches). Can anyone suggest what else I should look at or how I could get more detailed errors from OpenLDAP? Anything else I can test to narrow down the source of the problem?

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

• Suggestion to reverse string in c#

  - by HasanGursoy

  Is this the right method to reverse a string? I'm planning to use it to reverse a string like: Products » X1 » X3 to X3 « X1 « Products I want it to be a global function which can be used elsewhere. public static string ReverseString(string input, string separator, string outSeparator) { string result = String.Empty; string[] temp = Regex.Split(input, separator, RegexOptions.IgnoreCase); Array.Reverse(temp); for (int i = 0; i < temp.Length; i++) { result += temp[i] + " " + outSeparator + " "; } return result; }

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• What is the correct dependency rpm for libcurl.so.3

  - by SephMerah

  So I have a failed dependency and I am having trouble downloading the correct rpm. The error is libcurl.so.3()(64bit) is needed. I have Centos 6 and I have looking in this site for the correct rpm. The problem though is, and this is another place where linux fails in being intuitive, is that the rpm name is different than the dependency name. So it might be a curl3 rpm or a libcurl3 rpm or I have no idea. Anyone know which one it is?

  Read the article

• Windows 7 setup hangs after "Starting Windows..."-screen

  - by Eirik Lillebo

  Hi! I'm having some trouble installing Windows 7. I need to install the OS from boot in order to split my C: into two different partitions, as this is not allowed when installing from inside Vista. When I boot up from the install disc, I get the usual "Windows is copying files..."-screen, shortly followed by the "Starting Windows..."-screen with the animated window-logo or whatever. Then it looks as if the installation is about to begin with a blue screen and a cursor I can move around, but here it all stops. Nothing more happens, and the setup seems to hang. Not a single key on my keyboard has any effect, and all I am left to do is to abort and reboot. I've tried to install using two different DVDs (not clones), and the same thing happens every time. What may be causing this, and how may I fix it? Thanks in advance :)

  Read the article

• Finding optimal ddrescue command line options where Accuracy > Speed

  - by gav

  I'm read up a bit about this tool and obviously looked at the man pages. The trouble is that ddrescue takes so long I need to get the command right first time. I wasn't sure how to improve on the vanilla; $ sudo ./ddrescue -v /dev/disk0s5 MyVolImage.dmg MyVolRescue.log $ sudo ./ddrescue -v MyVolImage.dmg /dev/disk1s3 MyVolRestore.log From HSF+ to HSF+ drives Source (Broken) HDD is connected via USB 2.0 Dest HDD is inside MacBook I would choose accuracy over speed There seem to be a lot of options but I'm not sure how they impact quality and speed of recovery. Thanks, Gav

  Read the article

• Unable to log iptables

  - by ActuatedCrayon

  I'm having trouble getting iptables to log to any file. My iptables looks like: Chain INPUT (policy ACCEPT 1366 packets, 433582 bytes) pkts bytes target prot opt in out source destination 869 60656 LOG icmp -- venet0 * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 7 Syslogd is the only log helper running. The default syslog.conf didn't work, so I tried adding "kern.=debug -/var/log/iptables.log". But the file already has "kern.* -/var/log/kern.log". There are recent syslog entries, so it's not a permissions thing. I'm running Ubuntu 12.04.1 with 2.6.32-042stab061.2

  Read the article

• Configuring favicon with expires header in htaccess

  - by thehuby

  I have implemented Expires headers via mod_expires on my Apache server and have successfully created expires headers for most file types, however I am having trouble with the favicon. I initially tried adding a set of instructions for the .ico files but when checking via YSlow it has no expiry set. When this didn't work I amended it to be a GIF, however this seems to have the same issue. Other gif's on the website have correctly set expires headers (accoridng to YSlow at least). Can anyone shed any light on this situation?

  Read the article

• Is there a free ftp client that has macros

  - by wheresrhys

  At the moment I'm using filezilla to deploy new versions of a site to the live server. the trouble is that there are one or two config, bootstrap etc. files which are different for the live site and I have to be careful not to overwrite. Also there are big areas of code that never change (eg I use the zend framework, which is always the same). I'd like to be able to record a macro to upload the same bunch of files and folders every time, excluding subdirectories and files which shouldn't be overwritten. Does any ftp client offer this?

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >