Search Results

Search found 15306 results on 613 pages for 'nothing'.

Page 224/613 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• How to load tun module in linux?

  - by rabipelais

  I cannot manage to load the tun module in my archlinux box. I'm trying to connect with openvpn, but the log says nm-openvpn[6662]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19) lsmod | grep tun returns nothing. If I run sudo modprobe tun it returns failure, but no error message, and lsmod still has no tun. The module seems to exist, as there is a tun.ko.gz in /lib/modules/....... I really dont know what else to try. Thanks in advance

  Read the article

• Unable to record sound from web browser (firefox / chromium ) using recordmydesktop

  - by thamurath

  I have to do some screencast tutorials and i am using recordmydesktop with gtk frontend to do it. I need to record also the sound and here is where i have found the problem. It took me some time, but now I can record the sound from almost every application in my desktop ... almost. I need to capture some sound from a web application using java, but when i load the page nothing appears in the playback tab of pavucontrol. I think this is the problem, because if there is no sound stream i think the recordmydesktop program thinks there is no sound to record ... the funny thing is that I can ear the sound in my speakers! I have tried with Firefox and Chromium with no success. Although I have been able to record youtube videos without problem, so it seems that java is the key here. Any suggestion or idea? P.S.: I am using Ubuntu 11.10 with this configuration. ( if more information is needed please let me know) sight i cannot post images ... so I have an audigy2 sound card using Analog Stereo Output profile. I have also an "Internal Audio" device, but i have it with the "Off" profile. In recordmydesktop-Advanced-Sound: Device = default

  Read the article

• What's the relationship between meta-circular interpreters, virtual machines and increased performance?

  - by Gomi

  I've read about meta-circular interpreters on the web (including SICP) and I've looked into the code of some implementations (such as PyPy and Narcissus). I've read quite a bit about two languages which made great use of metacircular evaluation, Lisp and Smalltalk. As far as I understood Lisp was the first self-hosting compiler and Smalltalk had the first "true" JIT implementation. One thing I've not fully understood is how can those interpreters/compilers achieve so good performance or, in other words, why is PyPy faster than CPython? Is it because of reflection? And also, my Smalltalk research led me to believe that there's a relationship between JIT, virtual machines and reflection. Virtual Machines such as the JVM and CLR allow a great deal of type introspection and I believe they make great use it in Just-in-Time (and AOT, I suppose?) compilation. But as far as I know, Virtual Machines are kind of like CPUs, in that they have a basic instruction set. Are Virtual Machines efficient because they include type and reference information, which would allow language-agnostic reflection? I ask this because many both interpreted and compiled languages are now using bytecode as a target (LLVM, Parrot, YARV, CPython) and traditional VMs like JVM and CLR have gained incredible boosts in performance. I've been told that it's about JIT, but as far as I know JIT is nothing new since Smalltalk and Sun's own Self have been doing it before Java. I don't remember VMs performing particularly well in the past, there weren't many non-academic ones outside of JVM and .NET and their performance was definitely not as good as it is now (I wish I could source this claim but I speak from personal experience). Then all of a sudden, in the late 2000s something changed and a lot of VMs started to pop up even for established languages, and with very good performance. Was something discovered about the JIT implementation that allowed pretty much every modern VM to skyrocket in performance? A paper or a book maybe?

  Read the article

• Last-modified date not showing up in indexed documents

  - by Jared

  We have tried everything, pushing feeds, setting up fields in "document dates" screen to enable all documents in the index to contain a value for Last-modified date. Nothing seems to make documents retain a "last-modified date" in the index. How does one enable a last-modified date for all documents in the index? Note: the meta value will come from an external xml source (not a database). Followed the google instructions for our gsa version (6.4.0.G.22). Yes I know the GSA version is quite old, we've been told by our google-representative support team themselves, that updating the GSA to the latest version "should" resolve the problem, and by "should" I mean, their GSA did the same thing (no last-modified date) and updating our GSA is another can of worms story :)

  Read the article

• Cygwin/Git Bizarre Terminal Issue

  - by emptyset

  Alright, this is weird. First off, this is mintty running on up-to-date cygwin, with git pulled from cygwin's setup.exe. I am running zsh. $ git clone https://<user>@<domain>/<repository>/ ~/src/project/dev Initialized empty Git repository in /cygdrive/c/src/project/dev/.git/ Password: <actual password in plain text appears> # Nothing happens... ^C $ <password text that I just typed> zsh: command not found: <same password text> What is going on here? Is this a terminal problem, a shell problem, a git problem, or a cygwin problem? Update: Yes, I'm running the Cygwin git version, not the Windows version: $ which git /usr/bin/git $ git --version git version 1.7.1 $ /cygdrive/c/Program\ Files\ \(x86\)/Git/bin/git.exe --version git version 1.7.0.2.msysgit.0

  Read the article

• JEE frameworks, a road map to learn? and should I learn them?

  - by vibhor

  Background Information I have been into programming since past 1 years professionally, my day to day work includes writing BIRT reports, designing and validating forms using JEE (struts/spring, hibernate). I don't have a comp Sci 4 year degree (Electronics), so I have very Limited experience in comp Sci. Question JEE frameworks (struts1/2, spring, hibernate etc) are hot nowadays, however java world have a tendency of building A4j, B4J... mayway4J kind of stuff (and I am tired of it). AFAIK, frameworks are nothing but bunch of XML config files and hundreds of classes built to cram (by developer). And sooner then later a new framework come into picture that says I am the best among all. So My Question is - 1.What will you do to learn a framework (many frameworks) considering that it can be obsolete till you'll be master in it (Learning frameworks can take significant amount of time)? 2.Considering early into your career, will you give a damn that how well someone knows framework (knowing frame work is important but still..) and why/how should I learn a framework knowing I have to (un)learn it in order to learn other one (plenty of of 4Js....)? I am just trying to get a big picture, that, if you're in place of me, what would be your learning/cramming strategy (Road map)? I am not intended to start a holy war between A versus B, (frameworks are more or less essential).

  Read the article

• Problems to connect Java visualVM to a EC2-instance

  - by kasten

  I'm trying to profile a AWS EC2 instance via visualVM. The instance is in a securitygroup which allows all connections and i'm runing jstatd with a grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission; }; policy on it. When i try to connect from my local machine with visulVM nothing happens. When i use jps i get the following response $ jps -l -m -v rmi://ec2-xxx-xxx-xxx-xxx.compute-1.amazonaws.com Error communicating with remote host: Connection refused to host: xxx.xxx.xxx.xxx; nested exception is: java.net.ConnectException: Connection timed out But i can ssh into the instance and use jps locally. Has anyone a pointer in which direction i can debug further?

  Read the article

• Windows - Delayed Write Failed error on USB hard drive

  - by ndngrd

  I've got a new Verbatim 1.5TB USB hard drive (Samsung HD154UI) and I'm finding myself completely unable to fill it. I'm using Windows XP. Whenever I try to copy a load of files over, it works for some time (will copy over between 20 and 90GB) but eventually stops with an error saying "The specified path is too deep" - the specified is not too deep, there's nothing more than 2 dirs deep that I'm copying. A balloon pops up at the bottom saying "Windows - Delayed Write Failed" telling me the data could not be copied. This wouldn't be too bad if I could just restart the transfer, but after this error has happened I can't write anything else to the disk - including if I eject it and then connect it to another machine. It just seems completely locked. The only way I can unlock it is to delete everything that I was copying to it. I've tried various USB cables and copying from different machines, and the same thing keeps happening.

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• HLSL - Creating Shadows in 2D

  - by richard

  The way that I create shadows is by the following technique: http://www.catalinzima.com/2010/07/my-technique-for-the-shader-based-dynamic-2d-shadows/ But I have questions to HLSL. The way that I currently do it is, I have a black and white image, where Black means 'object', and white means 'nothing'. I then distort the image like in the tutorial. I do this with a pixel shader, but instead of rendering to the screen, I render to a texture, back to my application. I then take this, and create the shadows, and then send it back to the graphics card to undo the distortion, after the shadow has been added - this comes back and I have a stencil of shadow. I can put this ontop of the original image and send them back to the graphics card, which then puts them on the screen. To me this is alot of back and forth. Is there a way i can avoid this? The problem that I am having is that I need to basically go through all positions in the texture 3 times, and use the new new texture every time instead of the orginal one. I tried to read up on Passes, but i don't think that i am heading in the right direction there. Help?

  Read the article

• Website crawler/spider to get site map

  - by ack__

  I need to retrieve a whole website map, in a format like : http://example.org/ http://example.org/product/ http://example.org/service/ http://example.org/about/ http://example.org/product/viewproduct/ I need it to be linked-based (no file or dir brute-force), like : parse homepage - retrieve all links - explore them - retrieve links, ... And I also need the ability to detect if a page is a "template" to not retrieve all of the "child-pages". For example if the following links are found : http://example.org/product/viewproduct?id=1 http://example.org/product/viewproduct?id=2 http://example.org/product/viewproduct?id=3 I need to get only once the http://example.org/product/viewproduct I've looked into HTTtracks, wget (with spider-option), but nothing conclusive so far. The soft/tool should be downloadable, and I prefer if it runs on Linux. It can be written in any language. Thanks

  Read the article

• Use TV (hdmi) with non-square pixels

  - by labsin

  I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

  Read the article

• Repartition Ubuntu by command line?

  - by DisgruntledGoat

  On my server the filesystem includes these partitions: Filesystem Size Used Avail Use% Mounted on /dev/sda6 4.6G 929M 3.5G 21% / /dev/sda5 76M 20M 53M 27% /boot /dev/sda8 449G 199M 426G 1% /home /dev/sda7 4.6G 4.4G 0 100% /var (Output from df -ah) I'm storing the web sites and databases under /var and as you can see it's got full. The /home folder just has basic user directories and nothing else so I'd like to repartition the server so that /dev/sda8 is about 5GB, with the rest going to dev/sda7. What's the easiest way to do this via command line (i.e. SSH)?

  Read the article

• Recovery files from a damage VM?

  - by ejlml

  After search and search again, my VM still can't recovery. Does somebody know how to retrieve the files from the VM? My VM is XP, it can't boot up anymore after my forced quit. In the Mac OS 10.6.2, I try to "get info" the VM file, I can see it is still using 25G space. I try to mount it with VMDK mounter (just right click the VM file and chose open with), it can mount but nothing inside. I also try to use filesalvage to recovery the files after mounted the VM, it can recovery many many files, but the files name and some document become to be symbol. What can I do now? Pls help me, thanks!

  Read the article

• When my printer fails to print with only "printer error" as the message, how can I find details?

  - by lavinio

  Setup: Dell Latitude D620 in the docking station HP color laserjet 2550L Parallel cable Sometimes when I undock (and I do suspend before undocking and docking), when I reattach, the printer will not print. It simply says "error", with no description. Killing and restarting the spooler will not help, but rebooting will. There is nothing in the system event logs, nor does the print spooler window provide any details other than "error" My question is, when there is an error, is there any way to find out what is causing it to get stuck, so that I can "unstuck" it instead of rebooting?

  Read the article

• Postgresql init.d script not working

  - by Bram Jetten

  I installed Postgresql 8.4 on my VPS with Ubuntu 10.04. Default setup, nothing unusual. After the installation the dbserver is automatically started and is running great. The installer also sets a init.d script in place. This script however, doesn't seem to affect Postgres. $ sudo /etc/init.d/postgresql stop The above line is not stopping the server. The command does not fail or show any message. The logs won't say anything as well. After killing all postgres processes with killall I cannot get Postgres working again using the init script. When rebooting my VPS it somehow starts up and works again.

  Read the article

• excel vba to CRUD drupal nodes

  - by Kirk Hings

  We need to periodically migrate Excel reports data into Drupal nodes. We looked at replicating some Excel functionality in Drupal with slickgrid, but it wasn't up to snuff. The Excel reports people don't want to double-enter their data, but their data is important to be in this Drupal site. They have hundreds of Excel reports, and update a row in each weekly. We want a button at the row end to fire a VBA macro that submits the data to Drupal, where a new node is created from the info submitted. (Yes, we are experienced with both Drupal and VBA; all users and the site are behind our firewall.) We need the new node's nid or URL returned so we can then create a link in Excel directly to that node Site is D6, using Services 3.x module. I tried the REST server module, but we can't get it to retrieve data without session authentication on, which we can't do from Excel. (unless you can?) I also noticed the 'data' it was returning via browser url was 14 or 20 nodes' info, not the one nid requested (Example: http://mysite.com/services/rest/report/node/30161) When I attempt to create a simple node like this from VBA: Dim MyURL as String MyURL = "http://mysite.com/services/rest/report/node?node[type]=test&node[title]=testing123&node[field_test_one][0][value]=123" Set objHTTP = CreateObject("MSXML2.ServerXMLHTTP") With objHTTP .Open "POST", MyURL, False .setRequestHeader "Content-Type", "application/x-www-form-urlencoded" .send (MyURL) End With I get HTTP Status: Unauthorized: Access denied for user 0 "anonymous" and HTTP Response: null Everything I search for has examples in php or java, nothing in VBA. Also tried switching to using an XMLRPC server but that's even more confusing. We would like json (used application/json, set formatter accordingly in REST server settings), but will use anything that works. Ideas? Thanks in advance!

  Read the article

• How can I find a computer on my network that is doing mass mailings?

  - by Alex Ciarlill

  I was notified by my isp that one of my machines is sending out spam. This happened about 3 months ago on windows machine running cygwin that was hacked due to an SSH vuln. The hackers setup IIS and SMTP. I cleared out the machine and all the services are disabled so I think that machine is okay I am wondering if there is any other way to identify which machine it could be coming from? The ISP has NO useful information such as source port, destination port, destination IP... nothing. I am running DD-WRT on my router, Windows 7 PC and a Windows XP PC.

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• Skip "Sign in to your Microsoft account" (Windows 8.1 Setup)

  - by noloader

  I have an RT tablet and updated it to Windows 8.1. The update basically performs the new PC setup. I can't get past the "Sign into your Microsoft Account". Clicking "Next" does not allow me to proceed (and prompts me for an email address). Clicking "Don't have an account" does nothing because its not linked. The other two options are "Create an account" a "Privacy statement". I don't want to create an account, and I'm not interested in their perverted terms of service for an account. In Windows 8.0, we were given the option to use local authentication. How do I bypass this feature?

  Read the article

• Migrate reports from MS Access to OOo Base

  - by John Gardeniers

  I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

  Read the article

• Xcode find in document stuck in case-sensitive

  - by mjdth

  When in Xcode editing code for my objective C files, I often press Command-F to bring up the little Find-In-Document banner across the top. Sometimes this gets stuck in case-sensitive search, and when it does that it also won't loop through the entire document and sometimes won't even display the selected found string. I can't find any options to turn off the case sensitivity, and I never intentionally turned it on. I've restarted xcode several times hoping that would be it but it's changed nothing. Slightly off-topic, but this was the best place I could think of to ask this question. Thanks for any response!

  Read the article

• Rendering composite/SVideo input with GraphEdit (comp./svid. source for crossbar)?

  - by Synetech

  Does anyone know how to form a GraphEdit graph to render composite/SVideo input (especially for a Hauppauge or AIW card)? Google (and Google Images) finds only results focusing on rendering the TV tuner which is already simple enough. The tv-tuner-in pins connect to the TvTuner/TvAudio source, but nothing seems to be able to connect to the Composite/SVideo pins. I have looked through the filters and could find no sources to connect to the Composite/SVideo input pins of the crossbar; GraphEdit always complains that they are not compatible.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >