Search Results

Search found 5920 results on 237 pages for 'hand drawn'.

Page 225/237 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

  • Combining Shared Secret and Certificates

    - by Michael Stephenson
    As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message.   Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created   For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr.   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element.     Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store.     I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate.     The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding.   Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert.     Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

    Read the article

  • I'm a contract developer and I think I'm about to get screwed [closed]

    - by kagaku
    I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

    Read the article

  • Sending notification after an event has remained open for a specified period

    - by Loc Nhan
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Enterprise Manager (EM) 12c allows you to create an incident rule to send a notification and/or create an incident after an event has been open for a specified period. Such an incident rule will help prevent premature alerts on issues that may correct themselves within a certain amount of time. For example, there are some agents in an unstable network area, and often there are communication failures between the agents and the OMS lasting three, four minutes at a time. In this scenario, you may only want to receive alerts after an agent in that area has been in the Agent Unreachable status for at least five minutes. Note: Many non-target availability metrics allow users to specify the “number of occurrences” or the number of consecutive times metric values reach thresholds before a notification is sent. It is best to use the feature for such metrics. This article provides a step-by-step guide for creating an incident rule set to cater for the above scenario, that is, to create an incident and send a notification after the Agent Unreachable event has remained open for a five-minute duration. Steps to create the incident rule 1.     Log on to the console and navigate to Setup -> Incidents -> Incident Rules. Note: A non-super user requires the Create Enterprise Rule Set privilege, which is a resource privilege, to create an incident rule. The Incident Rules - All Enterprise Rules page displays. 2.     Click Create Rule Set … The Create Rule Set page displays. 3.     Enter a name for the rule set (e.g. Rule set for agents in flaky network areas), optionally enter a description, and leave everything else at default values, and click + Add. The Search and Select: Targets page pops up. Note:  While you can create a rule set for individual targets, it is a best practice to use a group for this purpose. 4.     Select an appropriate group, e.g. the AgentsInFlakyNework group. The Select button becomes enabled, click the button. The Create Rule Set page displays. 5.     Leave everything at default values, and click the Rules tab. The Create Rule Set page displays. 6.     Click Create… The Select Type of Rule to Create page pops up. 7.     Leave the Incoming events and updates to events option selected, and click Continue. The Create New Rule : Select Events page displays. 8.     Select Target Availability from the Type drop-down list. The page shows more options for Target Availability. 9.     Select the Specific events of type Target Availability option, and click + Add. The Select Target Availability events page pops up. 10.   Select Agent from the Target Type dropdown list. The page expands. 11.   Click the Agent unreachable checkbox, and click OK. Note: If you want to also receive a notification when the event is cleared, click the Agent unreachable end checkbox as well before clicking OK. The Create New Rule : Select Events page displays. 12.   Click Next. The Create New Rule : Add Actions page displays. 13.   Click + Add. The Add Actions page displays. 14.   Do the following: a.     Select the Only execute the actions if specified conditions match option (You don’t want the action to trigger always). The following options appear in the Conditions for Actions section. b.     Select the Event has been open for specified duration option. The Conditions for actions section expands. c.     Change the values of Event has been open for to 5 Minutes as shown below. d.     In the Create Incident or Update Incident section, click the Create Incident checkbox as following: e.     In the Notifications section, enter an appropriate EM user or email address in the E-mail To field. f.     Click Continue (in the top right hand corner). The Create New Rule : Add Actions page displays. 15.   Click Next. The Create New Rule : Specify name and Description page displays. 16.   Enter a rule name, and click Next. The Create New Rule : Review page appears. 17.   Click Continue, and proceed to save the rule set. The incident rule set creation completes. After one of the agents in the group specified in the rule set is stopped for over 5 minutes, EM will send a mail notification and create an incident as shown in the following screenshot. In conclusion, you have seen the steps to create an example incident rule set that only creates an incident and triggers a notification after an event has been open for a specified period. Such an incident rule can help prevent unnecessary incidents and alert notifications leaving EM administrators time to more important tasks. - Loc Nhan

    Read the article

  • HAProxy: Display a "BADREQ" | BADREQ's by the thousands

    - by GruffTech
    My HAProxy Configuration. #HA-Proxy version 1.3.22 2009/10/14 Copyright 2000-2009 Willy Tarreau <[email protected]> global maxconn 10000 spread-checks 50 user haproxy group haproxy daemon stats socket /tmp/haproxy log localhost local0 log localhost local1 notice defaults mode http maxconn 50000 timeout client 10000 option forwardfor except 127.0.0.1 option httpclose option httplog listen dcaustin 0.0.0.0:80 mode http timeout connect 12000 timeout server 60000 timeout queue 120000 balance roundrobin option httpchk GET /index.html log global option httplog option dontlog-normal server web1 10.10.10.101:80 maxconn 300 check fall 1 server web2 10.10.10.102:80 maxconn 300 check fall 1 server web3 10.10.10.103:80 maxconn 300 check fall 1 server web4 10.10.10.104:80 maxconn 300 check fall 1 listen stats 0.0.0.0:9000 mode http balance log global timeout client 5000 timeout connect 4000 timeout server 30000 stats uri /haproxy HAProxy is running, and the socket is working... adam@dcaustin:/etc/haproxy# echo "show info" | socat stdio /tmp/haproxy Name: HAProxy Version: 1.3.22 Release_date: 2009/10/14 Nbproc: 1 Process_num: 1 Pid: 6320 Uptime: 0d 0h14m58s Uptime_sec: 898 Memmax_MB: 0 Ulimit-n: 20017 Maxsock: 20017 Maxconn: 10000 Maxpipes: 0 CurrConns: 47 PipesUsed: 0 PipesFree: 0 Tasks: 51 Run_queue: 1 node: dcaustin desiption: Errors show nothing from socket... adam@dcaustin:/etc/haproxy# echo "show errors" | socat stdio /tmp/haproxy adam@dcaustin:/etc/haproxy# However... My Error log is exploding with "badrequests" with the Error code cR. cR (according to 1.3 documentation) is The "timeout http-request" stroke before the client sent a full HTTP request. This is sometimes caused by too large TCP MSS values on the client side for PPPoE networks which cannot transport full-sized packets, or by clients sending requests by hand and not typing fast enough, or forgetting to enter the empty line at the end of the request. The HTTP status code is likely a 408 here. Correct on the 408, but we're getting literally thousands of these requests every hour. (This log snippet is an clip for about 10 seconds of time...) Jun 30 11:08:52 localhost haproxy[6320]: 92.22.213.32:26448 [30/Jun/2011:11:08:42.384] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10002 408 212 - - cR-- 35/35/18/0/0 0/0 "<BADREQ>" Jun 30 11:08:54 localhost haproxy[6320]: 71.62.130.24:62818 [30/Jun/2011:11:08:44.457] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 39/39/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 84.73.75.236:3589 [30/Jun/2011:11:08:45.021] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10008 408 212 - - cR-- 35/35/15/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 69.39.20.190:49969 [30/Jun/2011:11:08:45.709] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 37/37/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:56 localhost haproxy[6320]: 2.29.0.9:58772 [30/Jun/2011:11:08:46.846] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 43/43/22/0/0 0/0 "<BADREQ>" Jun 30 11:08:57 localhost haproxy[6320]: 212.139.250.242:57537 [30/Jun/2011:11:08:47.568] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 42/42/21/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55046 [30/Jun/2011:11:08:48.559] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 46/46/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55044 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10004 408 212 - - cR-- 45/45/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55045 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10005 408 212 - - cR-- 44/44/24/0/0 0/0 "<BADREQ>" Jun 30 11:09:00 localhost haproxy[6320]: 68.197.56.2:52781 [30/Jun/2011:11:08:50.975] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 49/49/28/0/0 0/0 "<BADREQ>" From what I read on google, if i wanted to see what the bad requests are, I can show errors to the socket and it will spit them out. We do run a pretty heavily trafficed website and the percentage of "BADREQS" to normal requests is quite low, but I'd like to be able to get ahold of what that request WAS so I can debug it. stats # pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,tracked,type,rate,rate_lim,rate_max, dcaustin,FRONTEND,,,64,120,50000,88433,105889100,2553809875,0,0,4641,,,,,OPEN,,,,,,,,,1,1,0,,,,0,45,0,128, dcaustin,web1,0,0,10,28,300,20941,25402112,633143416,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,1,,20941,,2,11,,30, dcaustin,web2,0,0,9,30,300,20941,25026691,641475169,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,2,,20941,,2,11,,30, dcaustin,web3,0,0,10,27,300,20940,30116527,635015040,,0,,0,9,0,0,UP,1,1,0,0,0,2208,0,,1,1,3,,20940,,2,10,,31, dcaustin,web4,0,0,5,28,300,20940,25343770,643209546,,0,,0,8,0,0,UP,1,1,0,0,0,2208,0,,1,1,4,,20940,,2,11,,31, dcaustin,BACKEND,0,0,34,95,50000,83762,105889100,2553809875,0,0,,0,34,0,0,UP,4,4,0,,0,2208,0,,1,1,0,,83762,,1,43,,122, 88500 "Sessions" and 4500 errors. in the last 20 minutes.

    Read the article

  • Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/xmlbeans/XmlException

    - by Dheeraj kumar
    Hi, I have to read xls file in java.I used poi-3.6 to read xls file in Eclipse.But i m getting this ERROR"Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/xmlbeans/XmlException at ReadExcel2.main(ReadExcel2.java:38)". I have added following jars 1)poi-3.6-20091214.jar 2)poi-contrib-3.6-20091214.jar 3)poi-examples-3.6-20091214.jar 4)poi-ooxml-3.6-20091214.jar 5)poi-ooxml-schemas-3.6-20091214.jar 6)poi-scratchpad-3.6-20091214.jar Below is the code which i m using: import org.apache.poi.ss.usermodel.Workbook; import org.apache.poi.ss.usermodel.Sheet; import org.apache.poi.ss.usermodel.Row; import org.apache.poi.ss.usermodel.Cell; import org.apache.poi.xssf.usermodel.XSSFWorkbook; import org.apache.poi.xssf.usermodel.XSSFCell; import org.apache.poi.xssf.usermodel.XSSFRow; import java.io.FileInputStream; import java.io.IOException; import java.util.Iterator; import java.util.List; import java.util.ArrayList; public class ReadExcel { public static void main(String[] args) throws Exception { // // An excel file name. You can create a file name with a full path // information. // String filename = "C:\\myExcel.xl"; // // Create an ArrayList to store the data read from excel sheet. // List sheetData = new ArrayList(); FileInputStream fis = null; try { // // Create a FileInputStream that will be use to read the excel file. // fis = new FileInputStream(filename); // // Create an excel workbook from the file system. // // HSSFWorkbook workbook = new HSSFWorkbook(fis); Workbook workbook = new XSSFWorkbook(fis); // // Get the first sheet on the workbook. // Sheet sheet = workbook.getSheetAt(0); // // When we have a sheet object in hand we can iterator on each // sheet's rows and on each row's cells. We store the data read // on an ArrayList so that we can printed the content of the excel // to the console. // Iterator rows = sheet.rowIterator(); while (rows.hasNext()) { Row row = (XSSFRow) rows.next(); Iterator cells = row.cellIterator(); List data = new ArrayList(); while (cells.hasNext()) { Cell cell = (XSSFCell) cells.next(); data.add(cell); } sheetData.add(data); } } catch (IOException e) { e.printStackTrace(); } finally { if (fis != null) { fis.close(); } } showExelData(sheetData); } private static void showExelData(List sheetData) { // // Iterates the data and print it out to the console. // for (int i = 0; i < sheetData.size(); i++) { List list = (List) sheetData.get(i); for (int j = 0; j < list.size(); j++) { Cell cell = (XSSFCell) list.get(j); System.out.print(cell.getRichStringCellValue().getString()); if (j < list.size() - 1) { System.out.print(", "); } } System.out.println(""); } } } Please help. thanks in anticipation, Regards, Dheeraj!

    Read the article

  • NLP with greatly contrained input and abilities

    - by Mike F
    Hat in hand here. I'm a seasoned developer and I would be grateful for a bit of help. I don't have time to read or digest long intricate discussions on theoretical concepts around NLP (or go get my PHD). That said, I have read a few and it's a damn interesting field. The problem is I need real world solutions, for real world products, in real world time frames. The problem I'm having is right now I'm not sure what the right questions are to ask to get started implementing. I believe this is mostly related to vocabulary. I'll read somewhere, a blog post, a forum post, a whitepaper, and it says, I'm doing flooping with the blargy blarg method, and I go google flooping and blargy blarg, and I get references to more obscurity. It seemingly never ends. So, my question is multiphased. First, more generally, how do I become passingly educated on this quickly? Just in time educated. I only need to know what I need to know to take the next step. I've spent 20 years writing code. Explain quick. I'll get it. (I mean provide a reference to something that explains quickly of course). I'm happy to read the right book, but I don't want to read a book where I read the chapter introduction that explains what floopy floop is and then skip over the rest of the chapter with examples of floopy flooping (because now I get what it is). I also don't want to read a book that goes into too much detail with theoretical underpinnings or history. For example, the Jurafsky book seems like way more than I need: http://www.amazon.com/gp/product/0131873210. But I will read it if this is the right book to read. (It's also dang expensive!) I need the root node of the expedited learning tree here, if you will. Point me in the right direction and I'll be quite grateful. I'm expecting quite a lot of firehose drinking - I just need the right firehose. Second, what I need to do is take a single sentence, with a very reduced vocabulary, and get a grammar tree (sorry if this is the wrong terminology) that I can do something with. I know I could easily write this command line input style in c in a more conventional manner, but I need it to be way better than that. But I don't need a chatterbot either. What I'm doing needs to live in a constrained environment. I can't use Python (unfortunately). I can't ship with gigabytes of corpuses. I need any libraries I use to be in c/c++. If I have to write this myself, I will. Hopefully, it will be achievable considering the reduced problem set. Maybe, probably, that's just naive. If so, let me know. :-) Thanks in advance - Mike

    Read the article

  • MVC 2 Ajax.Beginform passes returned Html to javascript function

    - by Joe
    Hi, I have a small partial Create Person form in a page above a table of results. I want to be able to post the form to the server, which I can do no problem with ajax.Beginform. <% using (Ajax.BeginForm("Create", new AjaxOptions { OnComplete = "ProcessResponse" })) {%> <fieldset> <legend>Fields</legend> <div class="editor-label"> <%=Html.LabelFor(model => model.FirstName)%> </div> <div class="editor-field"> <%=Html.TextBoxFor(model => model.FirstName)%> <%=Html.ValidationMessageFor(model => model.FirstName)%> </div> <div class="editor-label"> <%=Html.LabelFor(model => model.LastName)%> </div> <div class="editor-field"> <%=Html.TextBoxFor(model => model.LastName)%> <%=Html.ValidationMessageFor(model => model.LastName)%> </div> <p> <input type="submit" /> </p> </fieldset> <% } %> Then in my controller I want to be able to post back a partial which is just a table row if the create is successful and append it to the table, which I can do easily with jquery. $('#personTable tr:last').after(data); However, if server validation fails I want to pass back my partial create person form with the validation errors and replace the existing Create Person form. I have tried returning a Json array Controller: return Json(new { Success = true, Html= this.RenderViewToString("PersonSubform",person) }); Javascript: var json_data = response.get_response().get_object(); with a pass/fail flag and the partial rendered as a string using the solition below but that doesnt render the mvc validation controls when the form fails. SO RenderPartialToString So, is there any way I can hand my javascript the out of the box PartialView("PersonForm") as its returned from my ajax.form? Can I pass some addition info as a Json array so I can tell if its pass or fail and maybe add a message? UPDATE I can now pass the HTML of a PartialView to my javascript but I need to pass some additional data pairs like ServerValidation : true/false and ActionMessage : "you have just created a Person Bill". Ideally I would pass a Json array rather than hidden fields in my partial. function ProcessResponse(response) { var html = response.get_data(); $("#campaignSubform").html(html); } Many thanks in advance

    Read the article

  • What does it mean when ARP shows <incomplete> on eth1

    - by Geoff Dalgas
    We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

    Read the article

  • Enable button based on TextBox value (WPF)

    - by zendar
    This is MVVM application. There is a window and related view model class. There is TextBox, Button and ListBox on form. Button is bound to DelegateCommand that has CanExecute function. Idea is that user enters some data in text box, presses button and data is appended to list box. I would like to enable command (and button) when user enters correct data in TextBox. Things work like this now: CanExecute() method contains code that checks if data in property bound to text box is correct. Text box is bound to property in view model UpdateSourceTrigger is set to PropertyChanged and property in view model is updated after each key user presses. Problem is that CanExecute() does not fire when user enters data in text box. It doesn't fire even when text box lose focus. How could I make this work? Edit: Re Yanko's comment: Delegate command is implemented in MVVM toolkit template and when you create new MVVM project, there is Delegate command in solution. As much as I saw in Prism videos this should be the same class (or at least very similar). Here is XAML snippet: ... <UserControl.Resources> <views:CommandReference x:Key="AddObjectCommandReference" Command="{Binding AddObjectCommand}" /> </UserControl.Resources> ... <TextBox Text="{Binding ObjectName, UpdateSourceTrigger=PropertyChanged}"> </TextBox> <Button Command="{StaticResource AddObjectCommandReference}">Add</Button> ... View model: // Property bound to textbox public string ObjectName { get { return objectName; } set { objectName = value; OnPropertyChanged("ObjectName"); } } // Command bound to button public ICommand AddObjectCommand { get { if (addObjectCommand == null) { addObjectCommand = new DelegateCommand(AddObject, CanAddObject); } return addObjectCommand; } } private void AddObject() { if (ObjectName == null || ObjectName.Length == 0) return; objectNames.AddSourceFile(ObjectName); OnPropertyChanged("ObjectNames"); // refresh listbox } private bool CanAddObject() { return ObjectName != null && ObjectName.Length > 0; } As I wrote in the first part of question, following things work: property setter for ObjectName is triggered on every keypress in textbox if I put return true; in CanAddObject(), command is active (button to) It looks to me that binding is correct. Thing that I don't know is how to make CanExecute() fire in setter of ObjectName property from above code. Re Ben's and Abe's answers: CanExecuteChanged() is event handler and compiler complains: The event 'System.Windows.Input.ICommand.CanExecuteChanged' can only appear on the left hand side of += or -= there are only two more members of ICommand: Execute() and CanExecute() Do you have some example that shows how can I make command call CanExecute(). I found command manager helper class in DelegateCommand.cs and I'll look into it, maybe there is some mechanism that could help. Anyway, idea that in order to activate command based on user input, one needs to "nudge" command object in property setter code looks clumsy. It will introduce dependencies and one of big points of MVVM is reducing them. Is it possible to solve this problem by using dependency properties?

    Read the article

  • Android - Saving an object in onSaveInstanceState?

    - by Donal Rafferty
    I have created a small XML parsing application for Android that displays information in a listview and then allows a user to click on the list view and a dialog with further info will pop up. The problem is that when the screen orientation is changed when a dialog screen is open I get a null pointer error. The null pointer occurs on the following line: if(setting.getAddForPublicUserNames() == 1){ This line is part of my dialogPrepare method: @Override public void onPrepareDialog(int id, Dialog dialog) { switch(id) { case (SETTINGS_DIALOG) : afpunText = ""; if(setting.getAddForPublicUserNames() == 1){ afpunText = "Yes"; } else{ afpunText = "No"; } String Text = "Login Settings: " + "\n" + "Password: " + setting.getPassword() + "\n" + "Server: " + setting.getServerAddress() + "\n" + "Register: " + setting.getRegistrarAddress() + "\n" + "Realm: " + setting.getRealm() + "\n" + "Public UserNames: " + afpunText + "\n" + "Preference Settings: " + "\n" + "Request VDN: " + setting.getRequestVDN() + "\n" + "Handover Settings: " + "\n" + "Enable Handover: " + setting.getEnableHandover() + "\n" + "Hand Over Number: " + setting.getHandoverNum() + "\n"; AlertDialog settingsDialog = (AlertDialog)dialog; settingsDialog.setTitle("Auth ID: " + setting.getUserName()); tv = (TextView)settingsDialog.findViewById(R.id.detailsTextView); if (tv != null) tv.setText(Text); break; } } So the error is that my variable setting is null after the screen orientation changes. I have tried to use the onSaveInstance state methods to fix that as follows: @Override public void onSaveInstanceState(Bundle savedInstanceState) { for(int i = 0; i < settings.size(); i++){ savedInstanceState.putString("Username"+i, settings.get(i).getUserName()); savedInstanceState.putString("Password"+i, settings.get(i).getPassword()); savedInstanceState.putString("Server"+i, settings.get(i).getServerAddress()); savedInstanceState.putString("Registrar"+i, settings.get(i).getRegistrarAddress()); savedInstanceState.putString("Realm"+i, settings.get(i).getRealm()); savedInstanceState.putInt("PUserNames"+i, settings.get(i).getAddForPublicUserNames()); savedInstanceState.putString("RequestVDN"+i, settings.get(i).getRequestVDN()); savedInstanceState.putString("EnableHandOver"+i, settings.get(i).getEnableHandover()); savedInstanceState.putString("HandOverNum"+i, settings.get(i).getHandoverNum()); } super.onSaveInstanceState(savedInstanceState); } and @Override public void onRestoreInstanceState(Bundle savedInstanceState) { super.onRestoreInstanceState(savedInstanceState); //Check to see if this is required // Restore UI state from the savedInstanceState. // This bundle has also been passed to onCreate. for(int i = 0; i<settings.size(); i++){ settings.get(i).setUserName(savedInstanceState.getString("Username"+i)); settings.get(i).setPassword(savedInstanceState.getString("Password"+i)) ; settings.get(i).setServerAddress(savedInstanceState.getString("Server"+i)); settings.get(i).setRegistrarAddress(savedInstanceState.getString("Registrar"+i)); settings.get(i).setRealm(savedInstanceState.getString("Realm"+i)); settings.get(i).setAddForPublicUserNames(savedInstanceState.getInt("PUserNames"+i)); settings.get(i).setRequestVDN(savedInstanceState.getString("RequestVDN"+i)); settings.get(i).setEnableHandover(savedInstanceState.getString("EnableHandOver"+i)); settings.get(i).setHandoverNum(savedInstanceState.getString("HandOverNum"+i)); } } However the error still remains, I think I have to save the selected setting from what was selected from the ListView? But how do I save a setting object in onSavedInstance?

    Read the article

  • localhost/phpmyadmin pulls blank page

    - by Atul Modi
    When I tried configuring local machine as a Internet Gateway with website development capabilities over it and I installed all required software into it. I also had disable the selinux into it. But PROBLEM is when I do http://localhost/phpMyAdmin or all lower case than the page shows it as a blank page. I am pasting code from httpd.conf file into this as well as from phpMyAdmin.conf file I am using Fedora 16 for this. httpd.conf ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule dbd_module modules/mod_dbd.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all UserDir disabled DirectoryIndex index.html index.htm index.php AccessFileName .htaccess Order allow,deny Deny from all Satisfy All TypesConfig /etc/mime.types DefaultType text/plain MIMEMagicFile conf/magic HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ # HEADER README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-tar .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .xml AddHandler application/x-httpd-php .xml AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4.0" force-response-1.0 BrowserMatch "Java/1.0" force-response-1.0 BrowserMatch "JDK/1.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully Order allow,deny Allow from all # phpMyAdmin.conf Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Can anyone help into this area please. Urgent reply will be appreciatable because i am struggling since one and half month for this matter. thank you, Atul

    Read the article

  • Propel Single Table Inheritance Issue

    - by lo_fye
    I have a table called "talk", which is defined as abstract in my schema.xml file. It generates 4 objects (1 per classkey): Comment, Rating, Review, Checkin It also generates TalkPeer, but I couldn't get it to generate the other 4 peers (CommentPeer, RatingPeer, ReviewPeer, CheckinPeer), so I created them by hand, and made them inherit from TalkPeer.php, which inherits from BaseTalkPeer. I then implemented getOMClass() in each of those peers. The problem is that when I do queries using the 4 peers, they return all 4 types of objects. That is, ReviewPeer will return Visits, Ratings, Comments, AND Reviews. Example: $c = new Criteria(); $c->add(RatingPeer::VALUE, 5, Criteria::GREATER_THAN); $positive_ratings = RatingPeer::doSelect($c); This returns all comments, ratings, reviews, & checkins that have a value 5. ReviewPeer should only return Review objects, and can't figure out how to do this. Do I actually have to go through and change all my criteria to manually specify the classkey? That seems a little pointless, since the Peer name already distinct. I don't want to have to customize each Peer. I should be able to customize JUST the TalkPeer, since they all inherit from it... I just can't figure out how. I tried changing doSelectStmt just in TalkPeer so that it automatically adds the CLASSKEY restriction to the Criteria. It almost works, but I get a: Fatal error: Cannot instantiate abstract class Talk in /models/om/BaseTalkPeer.php on line 503. Line 503 is in BaseTalkPeer::populateObjects(), and is the 3rd line below: $cls = TalkPeer::getOMClass($row, 0); $cls = substr('.'.$cls, strrpos('.'.$cls, '.') + 1); $obj = new $cls(); The docs talked about overriding BaseTalkPeer::populateObject(). I have a feeling that's my problem, but even after reading the source code, I still couldn't figure out how to get it to work. Here is what I tried in TalkPeer::doSelectStmt: public static function doSelectStmt(Criteria $criteria, PropelPDO $con = null) { $keys = array('models.Visit'=>1,'models.Comment'=>2,'models.Rating'=>3,'models.Review'=>4); $class_name = self::getOMClass(); if(isset($keys[$class_name])) { //Talk itself is not a returnable type, so we must check $class_key = $keys[$class_name]; $criteria->add(TalkPeer::CLASS_KEY, $class_key); } return parent::doSelectStmt($criteria, $con = null); } Here is an example of my getOMClass method from ReviewPeer: public static function getOMClass() { return self::CLASSNAME_4; //aka 'talk.Review'; } Here is the relevant bit of my schema: <table name="talk" idMethod="native" abstract="true"> <column name="talk_pk" type="INTEGER" required="true" autoIncrement="true" primaryKey="true" /> <column name="class_key" type="INTEGER" required="true" default="" inheritance="single"> <inheritance key="1" class="Visit" extends="models.Talk" /> <inheritance key="2" class="Comment" extends="models.Talk" /> <inheritance key="3" class="Rating" extends="models.Talk" /> <inheritance key="4" class="Review" extends="models.Rating" /> </column> </table> P.S. - No, I can't upgrade from 1.3 to 1.4. There's just too much code that would need to be re-tested

    Read the article

  • Summer Programming Plans

    - by Gabe
    I've wanted to start "hacking" for many months now. But I put it off in favor of school and other things. Now, though, I'm free for the summer and want to learn as much as I can. I have a rough idea of what I want to try my hand at, but need some guidance as to what specifically - and how - I should learn. This is my plan so far: 1) Get good at programming in general. I plan to read up on how to think/work like a programmer. I'm waiting for the Pragmatic Programmer to arrive, which will be the first book I read. Q: What other books/ebooks should I look at? What more can I do here? 2) Learn/Improve at HTML/CSS. My first project will be to make a personal website/blog for myself using HTML and CSS. ----Then I hope to write/design articles like Dustin Curtis. After I finish this (and learn a programming language) I'll try to create user-based a user-focused website. Q: It's my understanding that just trying to design/manage websites is a good way to learn/improve at HTML/CSS. Is that all correct? 3) Try music development. This might be a sort of stretch for stackoverflow, but I'm interested in mixing/making techno songs. (Think Justice, or Daft Punk, or MSTRKRFT.) Q: I have a Mac. Any ideas on how I could start/learn music making? Any programs I should download, for instance? 4) My main goal: Learning a web development language/framework. I'm a year into learning/using C++. But what I really want to do is develop websites and web apps. I've searched online, and there seems to be great debate over which language/framework to learn first (and which is best). I think I've narrowed it down to three: Ruby (Rails), Python (Django), and PHP (?). Q #1: Which should I learn and use first? (Reasons?) Q #2: One reason I was leaning towards PHP is that I'm taking a PHP development course next semester. Learning it now would make that course easy. If PHP was not the answer to Q #1, is it worth learning both? Or, would it be better to just focus on PHP for this summer and next semester, and then transition thereafter to a better language? 5) iPhone/iPad Programming (Maybe). I've a number of simple, useful app ideas that I'd like to eventually get too. I just bought a Mac, as well as a few app development books. Q #1: Am I spreading myself thin trying to learn all of the above, and objective-C? Q #2: How much harder/easier is objective-C compared to the above languages? Also, how easy is it to learn obj-C after learning a web development language (and some C++)? Q #3: Yes or no? Should I go for it, or just keeep with #1-4 for now? Also: If you have any tips on how I should learn (or how you learned to hack), I'm all ears. I'd be especially interested in how you planned out learning: did you just hack whenever you felt like it, or did you "study" the language a few hours a day, or something else? Thanks so much, guys.

    Read the article

  • C++ virtual functions.Problem with vtable

    - by adivasile
    I'm doing a little project in C++ and I've come into some problems regarding virtual functions. I have a base class with some virtual functions: #ifndef COLLISIONSHAPE_H_ #define COLLISIONSHAPE_H_ namespace domino { class CollisionShape : public DominoItem { public: // CONSTRUCTOR //------------------------------------------------- // SETTERS //------------------------------------------------- // GETTERS //------------------------------------------------- virtual void GetRadius() = 0; virtual void GetPosition() = 0; virtual void GetGrowth(CollisionShape* other) = 0; virtual void GetSceneNode(); // OTHER //------------------------------------------------- virtual bool overlaps(CollisionShape* shape) = 0; }; } #endif /* COLLISIONSHAPE_H_ */ and a SphereShape class which extends CollisionShape and implements the methods above /* SphereShape.h */ #ifndef SPHERESHAPE_H_ #define SPHERESHAPE_H_ #include "CollisionShape.h" namespace domino { class SphereShape : public CollisionShape { public: // CONSTRUCTOR //------------------------------------------------- SphereShape(); SphereShape(CollisionShape* shape1, CollisionShape* shape2); // DESTRUCTOR //------------------------------------------------- ~SphereShape(); // SETTERS //------------------------------------------------- void SetPosition(); void SetRadius(); // GETTERS //------------------------------------------------- cl_float GetRadius(); cl_float3 GetPosition(); SceneNode* GetSceneNode(); cl_float GetGrowth(CollisionShape* other); // OTHER //------------------------------------------------- bool overlaps(CollisionShape* shape); }; } #endif /* SPHERESHAPE_H_ */ and the .cpp file: /*SphereShape.cpp*/ #include "SphereShape.h" #define max(a,b) (a>b?a:b) namespace domino { // CONSTRUCTOR //------------------------------------------------- SphereShape::SphereShape(CollisionShape* shape1, CollisionShape* shape2) { } // DESTRUCTOR //------------------------------------------------- SphereShape::~SphereShape() { } // SETTERS //------------------------------------------------- void SphereShape::SetPosition() { } void SphereShape::SetRadius() { } // GETTERS //------------------------------------------------- void SphereShape::GetRadius() { } void SphereShape::GetPosition() { } void SphereShape::GetSceneNode() { } void SphereShape::GetGrowth(CollisionShape* other) { } // OTHER //------------------------------------------------- bool SphereShape::overlaps(CollisionShape* shape) { return true; } } These classes, along some other get compiled into a shared library. Building libdomino.so g++ -m32 -lpthread -ldl -L/usr/X11R6/lib -lglut -lGLU -lGL -shared -lSDKUtil -lglut -lGLEW -lOpenCL -L/home/adrian/AMD-APP-SDK-v2.4-lnx32/lib/x86 -L/home/adrian/AMD-APP-SDK-v2.4-lnx32/TempSDKUtil/lib/x86 -L"/home/adrian/AMD-APP-SDK-v2.4-lnx32/lib/x86" -lSDKUtil -lglut -lGLEW -lOpenCL -o build/debug/x86/libdomino.so build/debug/x86//Material.o build/debug/x86//Body.o build/debug/x86//SphereShape.o build/debug/x86//World.o build/debug/x86//Engine.o build/debug/x86//BVHNode.o When I compile the code that uses this library I get the following error: ../../../lib/x86//libdomino.so: undefined reference to `vtable for domino::CollisionShape' ../../../lib/x86//libdomino.so: undefined reference to `typeinfo for domino::CollisionShape' Command used to compile the demo that uses the library: g++ -o build/debug/x86/startdemo build/debug/x86//CMesh.o build/debug/x86//CSceneNode.o build/debug/x86//OFF.o build/debug/x86//Light.o build/debug/x86//main.o build/debug/x86//Camera.o -m32 -lpthread -ldl -L/usr/X11R6/lib -lglut -lGLU -lGL -lSDKUtil -lglut -lGLEW -ldomino -lSDKUtil -lOpenCL -L/home/adrian/AMD-APP-SDK-v2.4-lnx32/lib/x86 -L/home/adrian/AMD-APP-SDK-v2.4-lnx32/TempSDKUtil/lib/x86 -L../../../lib/x86/ -L"/home/adrian/AMD-APP-SDK-v2.4-lnx32/lib/x86" (the -ldomino flag) And when I run the demo, I manually tell it about the library: LD_LIBRARY_PATH=../../lib/x86/:$AMDAPPSDKROOT/lib/x86:$LD_LIBRARY_PATH bin/x86/startdemo After reading a bit about virtual functions and virtual tables I understood that virtual tables are handled by the compiler and I shouldn't worry about it, so I'm a little bit confused on how to handle this issue. I'm using gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC) Later edit: I'm really sorry, but I wrote the code by hand directly here. I have defined the return types in the code. I apologize to the 2 people that answered below. I have to mention that I am a beginner at using more complex project layouts in C++.By this I mean more complex makefiles, shared libraries, stuff like that.

    Read the article

  • Is this question too hard for a seasoned C++ architect?

    - by Monomer
    Background Information We're looking to hire a seasoned C++ architect (10+years dev, of which at least 6years must be C++ ) for a high frequency trading platform. Job advert says STL, Boost proficiency is a must with preferences to modern uses of C++. The company I work for is a Fortune 500 IB (aka finance industry), it requires passes in all the standard SHL tests (numeric, vocab, spatial etc) before interviews can commence. Everyone on the team was given the task of coming up with one question to ask the candidates during a written/typed test, please note this is the second test provided to the candidates, the first being Advanced IKM C++ test, done in the offices supervised and without internet access. People passing that do the second test. After roughly 70 candidates, my question has been determined to be statistically the worst performing - aka least number of people attempted it, furthermore even less people were able to give meaningful answers. Please note, the second test is not timed, the candidate can literally take as long as they like (we've had one person take roughly 10.5hrs) My question to SO is this, after SHL and IKM adv c++ tests, backed up with at least 6+ years C++ development experience, is it still ok not to be able to even comment about let alone come up with some loose strategy for solving the following question. The Question There is a class C with methods foo, boo, boo_and_foo and foo_and_boo. Each method takes i,j,k and l clock cycles respectively, where i < j, k < i+j and l < i+j. class C { public: int foo() {...} int boo() {...} int boo_and_foo() {...} int foo_and_boo() {...} }; In code one might write: C c; . . int i = c.foo() + c.boo(); But it would be better to have: int i = c.foo_and_boo(); What changes or techniques could one make to the definition of C, that would allow similar syntax of the original usage, but instead have the compiler generate the latter. Note that foo and boo are not commutative. Possible Solution We were basically looking for an expression templates based approach, and were willing to give marks to anyone who had even hinted or used the phrase or related terminology. We got only two people that used the wording, but weren't able to properly describe how they accomplish the task in detail. We use such techniques all over the place, due to the use of various mathematical operators for matrix and vector based calculations, for example to decide when to use IPP or hand woven implementations at compile time for a particular architecture and many other things. The particular area of software development requires microsecond response times. I believe could/should be able to teach a junior such techniques, but given the assumed caliber of candidates I expected a little more. Is this really a difficult question? Should it be removed? Or are we just not seeing the right candidates?

    Read the article

  • Wireless access point -> Powerline -> Router -> Internet, should this work?

    - by Anthony
    My network at home used to be a laptop and desktop connected wirelessly to a single Wireless ADSL router, a Cisco 877W. Wireless reception around the house with this setup was quite unreliable, so I've gone about looking to improve it. I purchased some Belkin Gigabit powerline adapters and I've got these working fine. I can hook a computer up to one of the powerline adapters, and with the other one plugged into the ADSL router the computer has internet access. Additionally I can hook a Netgear DG834G Wireless ADSL router into it with the adsl not plugged in, and after turning off DHCP can RJ45 a computer up to the network. Everything works fine. However, if I setup a wireless network on the Netgear then any computer that connects wirelessly to it cannot access the internet. It gets an IP address very slowly via DHCP which is a good one, but it cannot access the internet. It can however communicate with the RJ45'd computer also connected to the Netgear. I wondered whether this could be a problem with the Netgear so I've borrowed a Cisco Aironet 1200 and got this working fine when it's attached directly to the primary ADSL router. I can connect to it wireless and get onto the internet. However, if I then plug it into the Netgear I can communicate with other devices attached to the Netgear, but can't get any further than the Netgear. All the while though the other devices RJ45'd to the Netgear are communicating with the internet just fine. I'm starting to suspect it's one of two things causing the problem: 1) For some reason the belkin powerline adapters don't like carrying wireless-originating signals. Could this be possible? 2) The primary Cisco ADSL router doesn't want to communicate with other devices on my network more than one hop away from it. I'm making an assumption here that within the Netgear box the wireless and wired sides are handled differently. Could this be true? Has anyone successfully setup something similar to what I'm trying, with a wireless device on the otherside of a pair of powerline connectors? Update 06/07/2010 - Response to irrational John 28 June Thanks for the answer John - and for clearing up some of my questions. The model number of the belkin powerline adapters are F5D4076. Security was apparently enabled by default on them, and I didn't change them from their default setting. The network diagram in your answer shows exactly what I'm trying to setup: I've followed that guide and I'm still not able to get things working properly. The thing that perplexes me is that wired network traffic works just fine - it's only the wireless traffic that doesn't. This is with the same laptop, and the same DHCP or static IPs. "1. What IP addresses did you assign to each router? What subnet masks are you using?" - subnet is 255.255.255.0, the router connected to the adsl is 192.168.153.1 and that has the DHCP server. The access point on the other side of the powerline adapters I've tried both a static IP of 192.168.153.110, same subnet, and a DHCP-assigned IP. The other devices are DHCP, although I also tried manually entering IP settings. "2. Have you correctly enabled DHCP on only one of the routers and disabled it on all the others?" Yes I have - only the internet-connected router has DHCP enabled. The IP range for the DHCP is from 192.168.153.11 - 192.168.153.200. The strange thing is that wired connections work fine on the LAN, plugged into any router, work fine - it's only the wireless connections that aren't working when they're plugged into the non-primary AP. "Since the routers you are using appear to integrate an ADSL modem I'm assuming there is no WAN port on them." There's no NAT within the LAN, and all wired connections are connected to LAN ports. It's something wrong with the wireless - wired works fine throughout the whole LAN. Update 06/07/2010 - Response to irrational John 29 June The diagram you've drawn in your answer shows pretty much exactly what I'm trying to do. I've spent another evening trying different things and made some progress but I'm still scratching my head. I've borrowed a Netgear access point and been trying with this, and the strange thing is that my PC is working now - this is a Windows 7 PC connected to the access point in the position of where the DG834G is in the diagram. Meanwhile, however, I have an old Powerbook G4 12" I use for music, and while that has a DHCP-assigned IP address, it's not getting any network throughput to either LAN or internet addresses. To make matters more strange, my phone appears to be intermittently working when it's on the wifi. The access point is a Netgear WPN802v1, DHCP, NAT both switched off, running firmware 2.0.9.0. Last night I set it up with exactly the same settings, and similar to tonight I could get a couple of devices to work, and a couple not to. By the morning, however, everything had stopped working - nothing could get a DHCP IP address. I rebooted the 877W earlier this evening and I'm wondering whether this is why a few things are working now. "Could it be possible that the issue could be with the 877W?" I didn't configure this - is it possible that the DHCP server only likes assigning devices that are immediately attached to it? Or similar, could a firewall be stopping too many addresses that are coming through one device? (ie. the Access Point) This could explain why devices are working at the start but then not by the end. In reply to your questions, "1. I looked at the Netgear DG834G support page. There are five versions of this router. Which version do you have? Netgear usually lists this on the label on the bottom of the router. What version of the firmware does it have?" It's a DG834Gv3, and the firmware is the last on the netgear site version 4.01.40. "3. Not knowing which version you have, I glanced at the reference manual for the DG834G v3. In the section for Wireless Settings under the subsection Wireless Access Point there is a check box for a Wireless Isolation setting. If you have this setting it should be off/unchecked. If it is checked then any device connected via wireless would not be able to talk to any other device on the LAN. This sounds like your problem so maybe this is the cause?" I've checked this and it's switched off. I've made a change to the IP of the access point to something outside the DHCP range - it's now 192.158.153.5, with DHCP starting at 11 and going up to 254. Thanks for the tip about this - I only have a few devices so wouldn't anticipate the DHCP server assigning up to 110, but better safe than sorry. Finally one more thing I thought I should add, is with the Powerbook G4 that's not working - it's getting a DHCP IP address and it can communicate with the WPN802 as I can visit the administration page. Anything further than this, however, it can't reach; I can't administrate the 192.168.153.1 (877W router). Strangely, however, when I open Finder on the same powerbook it's detecting my NAS which is attached directly via wire to the 877W. If I try to browse it, it says connection failed. RE: "Perhaps the problem with your Powerbook is with DNS?.." The IP settings on the powerbook are identical to that of the PC with the exception of the IP address; the PC is 192.168.153.17 and the powerbook is 192.168.153.12. Subnets are the same, 255.255.255.0 and default gateway is the same, .1, and the DNS servers are the same. I administrate the 877W by going to 192.168.153.1 in the browser. This is what isn't working from the Powerbook, despite the PC working fine when I do the same. Meanwhile, however, I can administrate the AP on 192.168.153.5 from both PC and Powerbook Update 06/07/2010 - FINAL RESOLUTION of sorts: First off, sorry for the length of this question. I need start to practice a more concise writing style, so I'm going to try to keep this bit brief. After much fiddling, and with the hugely-appreciated help of irrational John, I have come to the conclusion that it's something wrong with the powerbook. I believe that this was perhaps the reason I doubted things worked at the very beginning. I now have the original DG834Gv3 running both wirelessly and wired, and both wired devices and wireless devices get internet connectivity. The only anomaly is the powerbook which I've had to keep wired, as no matter what I do it refuses to work wirelessly. I still have suspicions that the 877W isn't quite right; I'm fairly sure that if I RJ45 the powerline adapter into a different LAN port on it then everything will break. I've just about run out of patience to test this further, and I think I need to go into the 877W's config to match the 877w's lan port's settings. I'm accepting irrational John's answer as he's been enormously helpful, way above the call of duty, and for this line he wrote: Beats the heck out of me. which in the midst of great frustration made me chuckle, and for a sentence in one of his comments to the same answer: If it is specific to the Powerbook I would put that issue aside until after you feel you have the rest of your LAN and the additional WAP all working together correctlyt It was this second sentence that made me put the powerbook aside and concentrate on the other devices that ultimately led me to getting things working.

    Read the article

  • TSQL Shred XML - Working with namespaces (newbie @ shredding XML)

    - by drachenstern
    Here's a link to my previous question on this same block of code with a working shred example Ok, I'm a C# ASP.NET dev following orders: The orders are to take a given dataset, shred the XML and return columns. I've argued that it's easier to do the shredding on the ASP.NET side where we already have access to things like deserializers, etc, and the entire complex of known types, but no, the boss says "shred it on the server, return a dataset, bind the dataset to the columns of the gridview" so for now, I'm doing what I was told. This is all to head off the folks who will come along and say "bad requirements". Task at hand: Current code that doesn't work: And if we modify the previous post to include namespaces on the XML elements, we lose the functionality that the previous post has... DECLARE @table1 AS TABLE ( ProductID VARCHAR(10) , Name VARCHAR(20) , Color VARCHAR(20) , UserEntered VARCHAR(20) , XmlField XML ) INSERT INTO @table1 SELECT '12345','ball','red','john','<sizes xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><size xmlns="http://example.com/ns" name="medium"><price>10</price></size><size xmlns="http://example.com/ns" name="large"><price>20</price></size></sizes>' INSERT INTO @table1 SELECT '12346','ball','blue','adam','<sizes xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><size xmlns="http://example.com/ns" name="medium"><price>12</price></size><size xmlns="http://example.com/ns" name="large"><price>25</price></size></sizes>' INSERT INTO @table1 SELECT '12347','ring','red','john','<sizes xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><size xmlns="http://example.com/ns" name="medium"><price>5</price></size><size xmlns="http://example.com/ns" name="large"><price>8</price></size></sizes>' INSERT INTO @table1 SELECT '12348','ring','blue','adam','<sizes xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><size xmlns="http://example.com/ns" name="medium"><price>8</price></size><size xmlns="http://example.com/ns" name="large"><price>10</price></size></sizes>' INSERT INTO @table1 SELECT '23456','auto','black','ann','<auto xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><type xmlns="http://example.com/ns">car</type><wheels xmlns="http://example.com/ns">4</wheels><doors xmlns="http://example.com/ns">4</doors><cylinders xmlns="http://example.com/ns">3</cylinders></auto>' INSERT INTO @table1 SELECT '23457','auto','black','ann','<auto xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><type xmlns="http://example.com/ns">truck</type><wheels xmlns="http://example.com/ns">4</wheels><doors xmlns="http://example.com/ns">2</doors><cylinders xmlns="http://example.com/ns">8</cylinders></auto><auto xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><type xmlns="http://example.com/ns">car</type><wheels xmlns="http://example.com/ns">4</wheels><doors xmlns="http://example.com/ns">4</doors><cylinders xmlns="http://example.com/ns">6</cylinders></auto>' DECLARE @x XML -- I think I'm supposed to use WITH XMLNAMESPACES(...) here but I don't know how SELECT @x = ( SELECT ProductID , Name , Color , UserEntered , XmlField.query(' for $vehicle in //auto return <auto type = "{$vehicle/type}" wheels = "{$vehicle/wheels}" doors = "{$vehicle/doors}" cylinders = "{$vehicle/cylinders}" />') FROM @table1 table1 WHERE Name = 'auto' FOR XML AUTO ) SELECT @x SELECT ProductID = T.Item.value('../@ProductID', 'varchar(10)') , Name = T.Item.value('../@Name', 'varchar(20)') , Color = T.Item.value('../@Color', 'varchar(20)') , UserEntered = T.Item.value('../@UserEntered', 'varchar(20)') , VType = T.Item.value('@type' , 'varchar(10)') , Wheels = T.Item.value('@wheels', 'varchar(2)') , Doors = T.Item.value('@doors', 'varchar(2)') , Cylinders = T.Item.value('@cylinders', 'varchar(2)') FROM @x.nodes('//table1/auto') AS T(Item) If my previous post shows there's a much better way to do this, then I really need to revise this question as well, but on the off chance this coding-style is good, I can probably go ahead with this as-is... Any takers?

    Read the article

  • Strategy and AI for the game 'Proximity'

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal strategy then b) how to build an AI Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the high branching factor (starts out at 120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • Most simple way to do holiday calculation?

    - by brainfrog
    I want to make a little free calendar program to help me and others calculate how much time we have got left in a project. I mean real working time, not just time. Time in a raw form is not saying much. Typically when my boss tells me that I have time until 05-05-2011 it doesn't tell me really how much time I have to do my job. You know...so many things stop me from work: A) beeing at home, not at work (so called "free time" or "spare time"). That is in my case I work exactly 8 hours a day and then the cleaning ladies throw me out of the office with their incredible loud industrial vacuum cleaners every evening (my boss accepts that as an excuse to go home in time, regularly). B) weekends, or more precisely saturdays and sundays C) official holiday rescuing me from having to go to work. what I want to do is make a little utility which tells me how many working hours I really have in a given time period. The first two things A and B are pretty easy to implement. But the last thing C scares my pants off. Holidays. OOOHHH man. You know what that means. Chaos. Pure chaos. The huge question is: HOW TO CALCULATE HOLIDAYS?! Since I want my program to be useful for anyone anywhere in the world, I can't just hardcode all holidays for my little town. So which options do I have? I) I could hand-craft downloadable lists of holidays. Users search them within the application and download them from an webserver. Or I ship all of them in the package. But I would get very, very old if I tried that by myself for every country, state and town. II) I make an initial data sheet with holidays for my town, and don't care about the rest. However, I make that sheet with an how-to public, so that everyone who feels like beeing very nice can provide holiday data for his country / region / whatever. Those are made public on a webserver and everyone can get the data packages he/she needs for the app. III) ? I care a lot about usability. I don't want to make an ugly linux hack style hard to use app that only computer freaks can use. So you need to tell me more about holiday science. I was never really clever at this. I assume every single country in the world has it's own set of holidays. In every country there may be several states. For example the US has some, and Germany has also some states. Holidays vary from state to state. But I know from an good programmer he told me never assume anything. So the questions about holiday science are: Which categories do I need to make holiday-data-packs searchable? A guy from India should find quickly his holiday data pack, and a guy from Sillicon Valley should find his pack as equally fast. It makes most sense to me to filter for COUNTRY STATE WHATEVER. Like a drill-down-search. Did I miss something? What would be the best data format to hold holiday information? A holiday has a start and end date and a name. That should be enough. Would I put all this stuff in thousands of XML files? How would you go about this? Any hint / help is highly welcome! Thanks to everyone!

    Read the article

  • Is the Cloud ready for an Enterprise Java web application? Seeking a JEE hosting advice.

    - by Jakub Holý
    Greetings to all the smart people around here! I'd like to ask whether it is feasible or a good idea at all to deploy a Java enterprise web application to a Cloud such as Amazon EC2. More exactly, I'm looking for infrastructure options for an application that shall handle few hundred users with long but neither CPU nor memory intensive sessions. I'm considering dedicated servers, virtual private servers (VPSs) and EC2. I've noticed that there is a project called JBoss Cloud so people are working on enabling such a deployment, on the other hand it doesn't seem to be mature yet and I'm not sure that the cloud is ready for this kind of applications, which differs from the typical cloud-based applications like Twitter. Would you recommend to deploy it to the cloud? What are the pros and cons? The application is a Java EE 5 web application whose main function is to enable users to compose their own customized Product by combining the available Parts. It uses stateless and stateful session beans and JPA for persistence of entities to a RDBMS and fetches information about Parts from the company's inventory system via a web service. Aside of external users it's used also by few internal ones, who are authenticated against the company's LDAP. The application should handle around 300-400 concurrent users building their product and should be reasonably scalable and available though these qualities are only of a medium importance at this stage. I've proposed an architecture consisting of a firewall (FW) and load balancer supporting sticky sessions and https (in the Cloud this would be replaced with EC2's Elastic Load Balancing service and FW on the app. servers, in a physical architecture the load-balancer would be a HW), then two physical clustered application servers combined with web servers (so that if one fails, a user doesn't loose his/her long built product) and finally a database server. The DB server would need a slave backup instance that can replace the master instance if it fails. This should provide reasonable availability and fault tolerance and provide good scalability as long as a single RDBMS can keep with the load, which should be OK for quite a while because most of the operations are done in the memory using a stateful bean and only occasionally stored or retrieved from the DB and the amount of data is low too. A problematic part could be the dependency on the remote inventory system webservice but with good caching of its outputs in the application it should be OK too. Unfortunately I've only vague idea of the system resources (memory size, number and speed of CPUs/cores) that such an "average Java EE application" for few hundred users needs. My rough and mostly unfounded estimate based on actual Amazon offerings is that 1.7GB and a single, 2-core "modern CPU" with speed around 2.5GHz (the High-CPU Medium Instance) should be sufficient for any of the two application servers (since we can handle higher load by provisioning more of them). Alternatively I would consider using the Large instance (64b, 7.5GB RAM, 2 cores at 1GHz) So my question is whether such a deployment to the cloud is technically and financially feasible or whether dedicated/VPS servers would be a better option and whether there are some real-world experiences with something similar. Thank you very much! /Jakub Holy PS: I've found the JBoss EAP in a Cloud Case Study that shows that it is possible to deploy a real-world Java EE application to the EC2 cloud but unfortunately there're no details regarding topology, instance types, or anything :-(

    Read the article

  • Find optimal strategy and AI for the game 'Proximity'?

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal algorithm then b) how to build an AI. Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the insane branching factor (20^120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • WPF DataTemplateKey can not find ListBox key

    - by Ryan
    I am fairly new to WPF and am having trouble getting the DataTemplateKey to find my ListBox. <Window.Resources> <ControlTemplate x:Key="FocusTemplate" > <Rectangle Fill="Azure" Width="290" Height="55" /> </ControlTemplate> <Style x:Key="FocusStyle" TargetType="{x:Type Control}"> <Setter Property="Template" Value="{StaticResource FocusTemplate}"/> </Style> <Style TargetType="ListBoxItem"> <EventSetter Event="GotFocus" Handler="ListItem_GotFocus"></EventSetter> </Style> <DataTemplate DataType="{x:Type TextBlock}"> </DataTemplate> <DataTemplate x:Key="CustomListData" DataType="{x:Type ListBox}"> <Border BorderBrush="Black" BorderThickness="1" Margin="-2,0,0,-1"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="55*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Grid.RenderTransform> <TransformGroup> <ScaleTransform ScaleX="1" ScaleY="1"/> <SkewTransform AngleX="0" AngleY="0"/> <RotateTransform Angle="0"/> <TranslateTransform X="0" Y="0"/> </TransformGroup> </Grid.RenderTransform> <!--<ScrollViewer x:Name="PART_ContentHost" />--> <TextBox Width="290" TextAlignment="Left" VerticalContentAlignment="Center" BorderThickness="0" BorderBrush="Transparent" Foreground="#FF6FB8FD" FontSize="18" FocusVisualStyle="{StaticResource FocusStyle}" Name="editingBox" TextWrapping="Wrap" Text="{Binding .}" Grid.Column="1" Grid.Row="1" MinHeight="55" Cursor="Hand" IsReadOnly="True" > <TextBox.Background> <LinearGradientBrush EndPoint="0,1" StartPoint="0,0"> <LinearGradientBrush.RelativeTransform> <TransformGroup> <ScaleTransform CenterX="0.5" CenterY="0.5"/> <SkewTransform CenterX="0.5" CenterY="0.5"/> <RotateTransform Angle="0" CenterX="0.5" CenterY="0.5"/> <TranslateTransform/> </TransformGroup> </LinearGradientBrush.RelativeTransform> <GradientStop Color="#FF2D4984"/> <GradientStop Color="#FF182D56" Offset="0.042"/> </LinearGradientBrush> </TextBox.Background> </TextBox> </Grid> </Border> </DataTemplate> <Style TargetType="{x:Type ListBox}"> <Setter Property="ItemTemplate" Value="{StaticResource CustomListData }" /> <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Disabled" /> </Style> </Window.Resources> <Window.DataContext> <ObjectDataProvider ObjectType="{x:Type local:ImageLoader}" MethodName="LoadImages" /> </Window.DataContext> <ListBox ItemsSource="{Binding}" Width="320" Background="#FF021422" BorderBrush="#FF1C4B79"> <ListBox.Resources> <SolidColorBrush x:Key="{x:Static SystemColors.HighlightBrushKey}">Transparent</SolidColorBrush> </ListBox.Resources> </ListBox> The following code will find a TextBlock var key = new System.Windows.DataTemplateKey(typeof(TextBlock)); var r = (DataTemplate)this.FindResource(key); However, when I change the type to ListBox, the key can not be found. What have I missed? Thanks Ryan

    Read the article

  • Chaining CSS classes in IE6 - Trying to find a jQuery solution?

    - by Mike Baxter
    Right, perhaps I ask the impossible? I consider myself fairly new to Javscript and jQuery, but that being said, I have written some fairly complex code recently so I am definitely getting there... however I am now possed with a rather interesting issue at my current freelance contract. The previous web coder has taken a Grid-960 approach to the HTML and as a result has used chained classes to style many of the elements. The example below is typical of what can be found in the code: <div class='blocks four-col-1 orange highlight'>Some content</div> And in the css there will be different declarations for: (not actual css... but close enough) .blocks {margin-right:10px;} .orange {background-image:url(someimage.jpg);} .highlight {font-weight:bold;} .four-col-1 {width:300px;} and to make matters worse... this is in the CSS: .blocks.orange.highlight {background-colour:#dd00ff;} Anyone not familiar with this particular bug can read more on it here: http://www.ryanbrill.com/archives/multiple-classes-in-ie/ it is very real and very annoying. Without wanting to go into the merrits of not chaining classes (I told them this, but it is no longer feasible to change their approach... 100 hand coded pages into a 150 page website, no CMS... sigh) and without the luxury of being able to change the way these blocks are styled... can anyone advise me on the complexity and benefits between any of my below proposed approaches or possible other options that would adequately solve this problem. Potential Solution 1 Using conditional comments I am considering loading a jquery script only for IE6 that: Reads the class of all divs in a certain section of the page and pushes to an array creates empty boxes off screen with only one of the classes applied at a time Reads the applied CSS values for each box Re-applies these styles to the individual box, somehow bearing in mind the order in which they are called and overwriting conflicting instructions as required Potential Solution 2 read the class of all divs in a certain section of the page and push to an array Scan the document for links to style sheets Ajax grab the stylesheets and traverse looking for matching names to those in class array Apply styles as needed Potential Solution 3 Create an IE6 only stylesheet containing the exact style to be applied as a unique name (ie: class='blocks orange highlight' becomes class='blocks-orange-highlight') Traverse the document in IE6 and convert all spaces in class declarations to hyphens and reapply classes based on new style name Summary: Solution 1 allows the people at this company to apply any styles in the future and the script will adjust as needed. However it does not allow for the chained style to be added, only the individual style... it is also processor intensive and time consuming, but also the most likely to be converted into a plugin that could be used the world over Solution 2 is a potential nightmare to code. But again will allow for an endless number of updates without breaking Solution 3 will require someone at the companty to hardcode the new styles every time they make a change, and if they don't, IE6 will break. Ironically the site, whilst needing to conform to IE6 in a limited manner, does not need to run wihtout javascript (they've made the call... have JS or go away), so consider all jQuery and JS solutions to be 'game on'. Did I mention how much i hate IE6? Anyway... any thoughts or comments would be appreciated. I will continue to develop my own solution and if I discover one that can be turned into a jQuery plugin I will post it here in the comments. Regards, Mike.

    Read the article

  • STL operator= behavior change with Visual Studio 2010?

    - by augnob
    Hi, I am attempting to compile QtScriptGenerator (gitorious) with Visual Studio 2010 (C++) and have run into a compile error. In searching for a solution, I have seen occasional references to compile breakages introduced since VS2008 due to changes in VS2010's implementation of STL and/or c++0x conformance changes. Any ideas what is happening below, or how I could go about fixing it? If the offending code appeared to be QtScriptGenerator's, I think I would have an easier time fixing it.. but it appears to me that the offending code may be in VS2010's STL implementation and I may be required to create a workaround? PS. I am pretty unfamiliar with templates and STL. I have a background in embedded and console projects where such things have until recently often been avoided to reduce memory consumption and cross-compiler risks. C:\Program Files\Microsoft Visual Studio 10.0\VC\INCLUDE\xutility(275) : error C2679: binary '=' : no operator found which takes a right-hand operand of type 'rpp::pp_output_iterator<_Container>' (or there is no acceptable conversion) with [ _Container=std::string ] c:\qt\qtscriptgenerator\generator\parser\rpp\pp-iterator.h(75): could be 'rpp::pp_output_iterator<_Container> &rpp::pp_output_iterator<_Container>::operator =(const char &)' with [ _Container=std::string ] while trying to match the argument list '(rpp::pp_output_iterator<_Container>, rpp::pp_output_iterator<_Container>)' with [ _Container=std::string ] C:\Program Files\Microsoft Visual Studio 10.0\VC\INCLUDE\xutility(2176) : see reference to function template instantiation '_Iter &std::_Rechecked<_OutIt,_OutIt>(_Iter &,_UIter)' being compiled with [ _Iter=rpp::pp_output_iterator<std::string>, _OutIt=rpp::pp_output_iterator<std::string>, _UIter=rpp::pp_output_iterator<std::string> ] c:\qt\qtscriptgenerator\generator\parser\rpp\pp-internal.h(83) : see reference to function template instantiation '_OutIt std::copy<std::_String_iterator<_Elem,_Traits,_Alloc>,_OutputIterator>(_InIt,_InIt,_OutIt)' being compiled with [ _OutIt=rpp::pp_output_iterator<std::string>, _Elem=char, _Traits=std::char_traits<char>, _Alloc=std::allocator<char>, _OutputIterator=rpp::pp_output_iterator<std::string>, _InIt=std::_String_iterator<char,std::char_traits<char>,std::allocator<char>> ] c:\qt\qtscriptgenerator\generator\parser\rpp\pp-engine-bits.h(500) : see reference to function template instantiation 'void rpp::_PP_internal::output_line<_OutputIterator>(const std::string &,int,_OutputIterator)' being compiled with [ _OutputIterator=rpp::pp_output_iterator<std::string> ] C:\Program Files\Microsoft Visual Studio 10.0\VC\INCLUDE\xutility(275) : error C2582: 'operator =' function is unavailable in 'rpp::pp_output_iterator<_Container>' with [ _Container=std::string ] Here's some context.. pp-internal.h-- #ifndef PP_INTERNAL_H #define PP_INTERNAL_H #include <algorithm> #include <stdio.h> namespace rpp { namespace _PP_internal { .. 68 template <typename _OutputIterator> 69 void output_line(const std::string &__filename, int __line, _OutputIterator __result) 70 { 71 std::string __msg; 72 73 __msg += "# "; 74 75 char __line_descr[16]; 76 pp_snprintf (__line_descr, 16, "%d", __line); 77 __msg += __line_descr; 78 79 __msg += " \""; 80 81 if (__filename.empty ()) 82 __msg += "<internal>"; 83 else 84 __msg += __filename; 85 86 __msg += "\"\n"; 87 std::copy (__msg.begin (), __msg.end (), __result); 88 }

    Read the article

  • How do I evaluate my skillset against the current market to see what needs improvement and where my

    - by baijajusav
    First of all, this question may be out of bounds for this site. If so, remove it. I say this because this site seems to be a place for more concrete questions that are not so relative in nature. And before I begin, for those of you whom just prefer a question and not this sort of dialog, here is my question: How can I assess my current skills as a programmer and decide where and what areas to improve upon? That said, here's what I'm asking/talking about, in essence. The market is always in constant flux. As programmers we're always having to learn new things, update our skills, push ourselves into that next project. There's not a very good litmus test that I know of for us to get an idea of where we stand as programmers. I came across this blog post by Jeff Atwood talking about why can't programmers code. Instinctively (and as the post goes on to state) I rushed through the program in about 4 minutes (most of that time was b/c I was hand writing it out. Still, this doesn't really answer the question of where do my skills need to be to succeed in today's world. I real blogs, listen to podcasts, try to keep up on the latest things coming out. It has only been in the past couple of months that I made a decision to pick a focus area for my learning as I can't learn everything and trying to do so is to spread myself too thin. I chose ASP.NET MVC & C#. I plan to stick with Microsoft technologies, not out of some sense of loyalty or stubbornness, but rather because they seem to stream together and have a unifying connection between them. With Windows Phone 7 coming out, it seems that now is the obvious time to pick up WPF and Silverlight as well. Still, if you asked me to code something apart from intellisense and the internet, I probably couldn't get the syntax right. I don't have libraries memorized or know precisely where the classes I use exist within the .Net framework, namely because I haven't had to pull that knowledge out of the air. In a way, I suppose Visual Studio has insulated me, which isn't a good thing, but, at the same time, I've still been able to be productive. I'm working on my own side project to try and help my learning. In doing so, I'm trying to make use of best practices and 3rd party frameworks where I can. I'm using automapper and EF 1.0. I know everyone in the .net community seems to cry foul at the sound of EF 1.0, but I can't say why because I've never used it. There's no lazy loading and that has proven rather annoying; however, aside from that, I haven't had that much of an issue. Granted this is probably because I'm not writing tests as I go (which I'm not doing because I don't know how to test EF in tests and don't really have a clue how to write tests for ASP.NET MVC 1.0). I'm also using a custom membership provider; granted, it's a barebone implementation, but I'm using it still. My thinking in all of this is, while I am neglecting a great many important technologies that are in the mainstream, I'll have a working project in the end. I can come back and add those things after I finish. Doing it all now and at once seems like too much. I know how I work and I don't think I'd ever get it done that way. I've elected to make this a community wiki as I think this question might fight better there. If a moderator disagrees with that choice or the decision to post this here, the just delete the question. I'm not trying to make undue work for anyone. I'm just a programmer trying to assess my where his skills are now and where I should be improving.

    Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >