Search Results

Search found 18433 results on 738 pages for 'tfs power tools'.

Page 225/738 | < Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >

  • Identify SATA hard drive

    - by Rob Nicholson
    Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

    Read the article

  • 13-inch Macbook Pro Battery Not Charging

    - by hkhalidz
    I have a 13 inch Macbook Pro. From last night on, it says 'Battery Not Charging'. The charger's light is always green and if I remove the charger it turns off(means the battery is completely empty). I tried reseting the PRAM and SMC, but not dice. I also tried using different chargers with out any success. The Macbook Pro is from the new generations and is over a year old. The Power Information section indicates 458 for the Power Cycles. Any help would be greatly appreciated.

    Read the article

  • external HDD with SATA & USB interface?

    - by Greg
    Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model. Preferably one of the name brands so I have a better change of finding it here or locally if possible. Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

    Read the article

  • The cable of my USB port hub is too short - what to do?

    - by Anna
    Hi, I just bought a new USB port hub "MSY USB 2.0 4-port hub". It has two inputs: A small USB entrance input for external power (?) The problem is that the cable that comes with the hub (small USB on one end, large USB on the other - to input into my computer), is too short for my needs. Is there a solution to this? buying a longer cable might be risky, I know that it might cause problems with power. Is there anything else I can do to make it work? Thanks.

    Read the article

  • Virtual Machine files on ramdisk doesn't run faster than on physical disk

    - by Landy
    I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • django development IDE

    - by Adam Carr
    I have done a little django development but it has all been in a text editor. I was curious what more advanced development tools others are using in their django development. I am used to using Visual Studio for development and really like the intellisense, code completion, and file organization it provides and would like to find something (or a combination of tools) that would provide some of this in the django/python environment.

    Read the article

  • Problem with intel chipset 4 serie and centos dealing with dual head

    - by Antoine
    I've a fujitsu lifebook S7220, it's been a while since i try to configure it to use a dual head with centos 5.4 x86_64. Everytime I try, the xserver crash... I've got an intel chipset mobile 4 serie (GMA 4500MHD, if I recall good!) When I do an lspci -v i've got these : 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 3 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0 Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 My question is, anyone already got this problem and how did you fix it? Thank you for your answer!

    Read the article

  • Solution for storing sata drives outside of case

    - by Jeffrey Kevin Pry
    I have a system that has 8 sata disks in a software raid 5 array using mdadm. My issue is that I want to move the drives from inside of the computer case in order to cool more efficiently. I have looked all over the web and only seem to find enclosures that hide the drives connectors behind an estata port or some other internal raid controller. Basically what I want is an enclosure or equivalent that I can run independent sata cables to and either power as well, or have it have its own power supply. I have the sata ports on the motherboard available and don't want to limit io by using one port with a multiplier or the like. One final caveat, I am a college student on a budget and don't have a fortune to spend on such an enclosure. Thanks in advance for your help and advice.

    Read the article

  • Code Analysis In Python

    - by Jerub
    What tools are good to use for code analysis in python? I have a large source repository split across multiple projects, and I would like to be able to run tools across the directories to see details like Cyclomatic Complexity, and perhaps be able to spot errors using static analysis. Ideally, I would like to be able to produce a report about the health of the source code, so we can spot problem areas that need to be addressed.

    Read the article

  • Should commit messages be written in present or past tense?

    - by user68759
    So which is it that you think is better and more intuitive? Fixed the XXX bug in YYY Fix the XXX bug in YYY Fixes the XXX bug in YYY Fixing the XXX bug in YYY Please provide your rationales. Note I am asking from your general perspective, meaning you should not try to associate this with your preferred svn/cvs tools or programming languages, but rather think of it as something that should/can be applied to any tools and programming languages.

    Read the article

  • Java - Which Business Intelligence (BI) platform can I embed with my commercial software for free?

    - by Yatendra Goel
    I am developing a java application and I want to use: Reporting Analysis Data Mining Data Integration tools to be shipped with my commercial application that I am NOT going to sell as an open source application. So I want to know which tools I can use in my app. Actually I am evaluating PENTAHO and JASPER but I don't understand licensing issues. Some comes under GPL, some under LGPL, some under CPL... so I am very confused about those.

    Read the article

  • Computer not working, motherboard is suspect

    - by Arlen Beiler
    I have a problem with my computer. I have a GeForce 6100 M9 Motherboard, which I suspect is broke. The capacitors beside the CPU are corroded and the computer doesn't do anything except start the fans when I push the power button. The problem is that I can't find another motherboard as they apparently don't sell this model anymore. I have tested the Power Supply and it appears to be working. Any advice would be appreciated. Different forums have mentioned that you can replace the capacitors. Any help on this would be appreciated.

    Read the article

  • Should server spare parts be stored in climate controlled storage?

    - by Shane Wealti
    What is a best practice for storing server spares (hard drives, RAM, power supplies, etc) with respect to how/where they are stored? Some options are storing them in climate controlled storage or just a standard warehouse-type stockroom? My understanding is that all other things being equal climate-controlled storage is preferred. What are the risks of storing that type of thing in a non-climate-controlled, somewhat dusty shelving area? Conversely are there risks to storing spares in a climate controlled area? If there are space limitations in climate controlled storage are there some parts, such as hard drives, which should be in climate controlled, while other parts such as power supplies will probably be ok in non climate controlled storage?

    Read the article

  • Windows Home Server Passwords Do Not Match

    - by Ben Fulton
    I have a Windows Home Server that chunks along just fine most of the time. I've never bothered to put it on a UPS and so it's vulnerable to power outages that happen a few times a year. This most recent time, it came back and seemed to be fine, but whenever I try to access a shared folder I get "Passwords do not match". They matched before the power went out, and I couldn't update the WHS password since I apparently didn't know the old one. How do I fix this? (I asked this on ServerFault and they recommended it be asked here instead)

    Read the article

  • High fan speed after return from suspend (on Ubuntu)

    - by Bolo
    Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

    Read the article

  • PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

    - by Jody
    This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

    Read the article

  • Prevent Windows 7 from unpluging External HDD

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • What good tiny or basic SVG editors are there?

    - by Sander Versluys
    I'm in need for a good SVG editor which can produce valid xml according to spec of the Tiny SVG profile. I would prefer if the tool was open-source or free but good commercial tools are welcome as well. Note: I have used some online tools and Inkscape, but those do not allow specifying the spec they must adhere to.

    Read the article

  • What is the command to use to put your computer to sleep (not hibernate)?

    - by airrick
    I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

    Read the article

< Previous Page | 221 222 223 224 225 226 227 228 229 230 231 232  | Next Page >