Search Results

Search found 15059 results on 603 pages for 'associative array'.

Page 227/603 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• ie7 innerhtml strange display problem

  - by thoraniann

  Hello, I am having a strange problem with ie7 (ie8 in compatibility mode). I have div containers where I am updating values using javascript innhtml to update the values. This works fine in Firefox and ie8. In ie7 the values do not update but if a click on the values and highlight them then they update, also if a change the height of the browser then on the next update the values get updated correctly. I have figured out that if I change the position property of the outer div container from relative to static then the updates work correctly. The page can be viewed here http://islendingasogur.net/test/webmap_html_test.html In internet explorer 8 with compatibility turned on you can see that the timestamp in the gray box only gets updated one time, after that you see no changes. The timestamp in the lower right corner gets updated every 10 seconds. But if you highlight the text in the gray box then the updated timestamp values appears! Here is the page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <meta http-equiv="cache-control" content="no-cache"/> <meta http-equiv="pragma" content="no-cache"/> <meta http-equiv="expires" content="Mon, 22 Jul 2002 11:12:01 GMT"/> <title>innerhtml problem</title> <script type="text/javascript"> <!-- var alarm_off_color = '#00ff00'; var alarm_low_color = '#ffff00'; var alarm_lowlow_color = '#ff0000'; var group_id_array = new Array(); var var_alarm_array = new Array(); var timestamp_color = '#F3F3F3'; var timestamp_alarm_color = '#ff00ff'; group_id_array[257] = 0; function updateParent(var_array, group_array) { //Update last update time var time_str = "Last Reload Time: "; var currentTime = new Date(); var hours = currentTime.getHours(); var minutes = currentTime.getMinutes(); var seconds = currentTime.getSeconds(); if(minutes < 10) {minutes = "0" + minutes;} if(seconds < 10) {seconds = "0" + seconds;} time_str += hours + ":" + minutes + ":" + seconds; document.getElementById('div_last_update_time').innerHTML = time_str; //alert(time_str); alarm_var = 0; //update group values for(i1 = 0; i1 < var_array.length; ++i1) { if(document.getElementById(var_array[i1][0])) { document.getElementById(var_array[i1][0]).innerHTML = unescape(var_array[i1][1]); if(var_array[i1][2]==0) {document.getElementById(var_array[i1][0]).style.backgroundColor=alarm_off_color} else if(var_array[i1][2]==1) {document.getElementById(var_array[i1][0]).style.backgroundColor=alarm_low_color} else if(var_array[i1][2]==2) {document.getElementById(var_array[i1][0]).style.backgroundColor=alarm_lowlow_color} //check if alarm is new var_id = var_array[i1][3]; if(var_array[i1][2]==1 && var_array[i1][4]==0) { alarm_var = 1; } else if(var_array[i1][2]==2 && var_array[i1][4]==0) { alarm_var = 1; } } } //Update group timestamp and box alarm color for(i1 = 0; i1 < group_array.length; ++i1) { if(document.getElementById(group_array[i1][0])) { //set timestamp for group document.getElementById(group_array[i1][0]).innerHTML = group_array[i1][1]; if(group_array[i1][4] != -1) { //set data update error status current_timestamp_color = timestamp_color; if(group_array[i1][4] == 1) {current_timestamp_color = timestamp_alarm_color;} document.getElementById(group_array[i1][0]).style.backgroundColor = current_timestamp_color; } } } } function update_map(map_id) { document.getElementById('webmap_update').src = 'webmap_html_test_sub.html?first_time=1&map_id='+map_id; } --> </script> <style type="text/css"> body { margin:0; border:0; padding:0px;background:#eaeaea;font-family:verdana, arial, sans-serif; text-align: center; } A:active { color: #000000;} A:link { color: #000000;} A:visited { color: #000000;} A:hover { color: #000000;} #div_header { /*position: absolute;*/ background: #ffffff; width: 884px; height: 60px; display: block; float: left; font-size: 14px; text-align: left; /*overflow: visible;*/ } #div_container{ background: #ffffff;border-left:1px solid #000000; border-right:1px solid #000000; border-bottom:1px solid #000000; float: left; width: 884px;} #div_image_container{ position: relative; width: 884px; height: 549px; background: #ffffff; font-family:arial, verdana, arial, sans-serif; /*display: block;*/ float:none!important; float/**/:left; border:1px solid #00ff00; padding: 0px; } .div_group_box{ position: absolute; width: -2px; height: -2px; background: #FFFFFF; opacity: 1; filter: alpha(opacity=100); border:1px solid #000000; font-size: 2px; z-index: 0; padding: 0px; } .div_group_container{ position: absolute; opacity: 1; filter: alpha(opacity=100); z-index: 5; /*display: block;*/ /*border:1px solid #000000;*/ } .div_group_container A:active {text-decoration: none; display: block;} .div_group_container A:link { color: #000000;text-decoration: none; display: block;} .div_group_container A:visited { color: #000000;text-decoration: none; display: block;} .div_group_container A:hover { color: #000000;text-decoration: none; display: block;} .div_group_header{ background: #17B400; border:1px solid #000000;font-size: 12px; color: #FFFFFF; padding-top: 1px; padding-bottom: 1px; padding-left: 2px; padding-right: 2px; text-align: center; } .div_var_name_container{ color: #000000;background: #FFFFFF; border-left:1px solid #000000; border-top:0px solid #000000; border-bottom:0px solid #000000;font-size: 12px; float: left; display: block; text-align: left; } .div_var_name{ padding-top: 1px; padding-bottom: 1px; padding-left: 2px; padding-right: 2px; display: block; } .div_var_value_container{ color: #000000;background: #FFFFFF; border-left:1px solid #000000; border-right:1px solid #000000; border-top:0px solid #000000; border-bottom:0px solid #000000;font-size: 12px; float: left; text-align: center; } .div_var_value{ padding-top: 1px; padding-bottom: 1px; padding-left: 2px; padding-right: 2px; } .div_var_unit_container{ color: #000000;background: #FFFFFF; border-right:1px solid #000000; border-top:0px solid #000000; border-bottom:0px solid #000000;font-size: 12px; float: left; text-align: left; } .div_var_unit{ padding-top: 1px; padding-bottom: 1px; padding-left: 2px; padding-right: 2px; } .div_timestamp{ float: none; color: #000000;background: #F3F3F3; border:1px solid #000000;font-size: 12px; padding-top: 1px; padding-bottom: 1px; padding-left: 2px; padding-right: 2px; text-align: center; clear: left; z-index: 100; position: relative; } #div_last_update_time{ height: 14px; width: 210px; text-align: right; padding: 1px; font-size: 10px; float: right; } .copyright{ height: 14px; width: 240px; text-align: left; color: #777; padding: 1px; font-size: 10px; float: left; } a img { border: 1px solid #000000; } .clearer { clear: both; display: block; height: 1px; margin-bottom: -1px; font-size: 1px; line-height: 1px; } </style> </head> <body onload="update_map(1)"> <div id="div_container"><div id="div_header"></div><div class="clearer"></div><div id="div_image_container"><img id="map" src="Images/maps/0054_gardabaer.jpg" title="My map" alt="" align="left" border="0" usemap ="#_area_links" style="padding: 0px; margin: 0px;" /> <div id="group_container_257" class="div_group_container" style="visibility:visible; top:10px; left:260px; cursor: pointer;"> <div class="div_group_header" style="clear:right">Site</div> <div class="div_var_name_container"> <div id="group_name_257_var_8" class="div_var_name" >variable 1</div> <div id="group_name_257_var_7" class="div_var_name" style="border-top:1px solid #000000;">variable 2</div> <div id="group_name_257_var_9" class="div_var_name" style="border-top:1px solid #000000;">variable 3</div> </div> <div class="div_var_value_container"> <div id="group_value_257_var_8" class="div_var_value" >0</div> <div id="group_value_257_var_7" class="div_var_value" style="border-top:1px solid #000000;">0</div> <div id="group_value_257_var_9" class="div_var_value" style="border-top:1px solid #000000;">0</div> </div> <div class="div_var_unit_container"> <div id="group_unit_257_var_8" class="div_var_unit" >N/A</div> <div id="group_unit_257_var_7" class="div_var_unit" style="border-top:1px solid #000000;">N/A</div> <div id="group_unit_257_var_9" class="div_var_unit" style="border-top:1px solid #000000;">N/A</div> </div> <div id="group_257_timestamp" class="div_timestamp" style="">-</div> </div> </div><div class="clearer"></div><div class="copyright">© Copyright</div><div id="div_last_update_time">-</div> </div> <iframe id="webmap_update" style="display:none;" width="0" height="0"></iframe></body> </html> The divs with class div_var_value, div_timestamp & div_last_update_time all get updated by the javascript function. The div "div_image_container" is the one that is causing this it seems, atleast if I change the position property for it from relative to static the values get updated correctly This is the page that updates the values: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Loader</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <script type="text/javascript"> <!-- window.onload = doLoad; function refresh() { //window.location.reload( false ); var _random_num = Math.floor(Math.random()*1100); window.location.search="?map_id=54&first_time=0&t="+_random_num; } var var_array = new Array(); var timestamp_array = new Array(); var_array[0] = Array('group_value_257_var_9','41.73',-1, 9, 0); var_array[1] = Array('group_value_257_var_7','62.48',-1, 7, 0); var_array[2] = Array('group_value_257_var_8','4.24',-1, 8, 0); var current_time = new Date(); var current_time_str = current_time.getHours(); current_time_str += ':'+current_time.getMinutes(); current_time_str += ':'+current_time.getSeconds(); timestamp_array[0] = Array('group_257_timestamp',current_time_str,'box_group_container_206',-1, -1); //timestamp_array[0] = Array('group_257_timestamp','11:33:16 23.Nov','box_group_container_257',-1, -1); window.parent.updateParent(var_array, timestamp_array); function doLoad() { setTimeout( "refresh()", 10*1000 ); } //--> </script> </head> <body> </body> </html> I edited the post and added a link to the webpage in question, I have also tested the webpage in internet explorer 7 and this error does not appear there. I have only seen this error in ie8 with compatibility turned on. If anybody has seen this before and has a fix, I would be very grateful. Thanks.

  Read the article

• Screen Scraping Twitter

  - by BRADINO

  I got an email today asking for help to scrape Twitter. In particular, to be able to login. So I am going to show everyone, NOT to encourage anyone to violate Twitters terms of use but as an educational blog post about how PHP and cURL can be used to post variables and store cookies. Again, I am using the cScrape class I wrote, which you can download. Step 1 First go to twitter.com and look at the source code of the login to get the form field names and the form post location. You will see that the form posts to https://twitter.com/session and the username and password fields are session[username_or_email] and session[password] respectively. Step 2 Now you are ready to login. So using the fetch function in the Scrape class you create an associative array to contain the form values you want to post. The other thing you will need to do is uncomment the lines for CURLOPT_COOKIEFILE and CURLOPT_COOKIEJAR. Cookies will be required to stay logged in and scrape around. The paths to the cookie files need to be writable by your app. Also you will need to uncomment the line about CURLOPT_FOLLOWLOCATION. $data = array('session[username_or_email]' => "bradino", 'session[password]' => "secret"); $scrape->fetch('https://twitter.com/sessions',$data); Step 1.5 Oops that didn't work. All I got back was 403 Forbidden: The server understood the request, but is refusing to fulfill it. Ahhh I see another variable called authenticity_token I bet Twitter was looking for that. So let's back up and first hit twitter.com to get the authenticity_token variable, and then make the login post request with that variable included in our array of parameters. $scrape->fetch('https://twitter.com'); $data = array('session[username_or_email]' => "bradino", 'session[password]' => "secret"); $data['authenticity_token'] = $scrape->fetchBetween('name="authenticity_token" type="hidden" value="','"',$scrape->result); $scrape->fetch('https://twitter.com/sessions',$data); echo $scrape->result; So that's basically it. Now you are logged in and can scrape around and request other pages as you normally would. Sorry it wasn't a longer post. I really do enjoy this kind of stuff so if anyone has a request, hit me up. Errors? 1) Make sure that you are properly parsing the token variable 2) Make sure that you uncommented the lines about CURLOPT_COOKIEFILE and CURLOPT_COOKIEJAR, those options need to be enabled and be sure the path set is writable by your application 3) Make sure that the path to the cookie file is writable and that it is getting data written to it 4) If you get a message about being redirected you need to uncomment the line about CURLOPT_FOLLOWLOCATION, that option needs to be enabled true

  Read the article

• Requesting feedback on my OO design

  - by Prog

  I'm working on an application that creates music by itself. I'm seeking feedback for my OO design so far. This question will focus on one part of the program. The application produces Tune objects, that are the final musical products. Tune is an abstract class with an abstract method play. It has two subclasses: SimpleTune and StructuredTune. SimpleTune owns a Melody and a Progression (chord sequence). It's play implementation plays these two objects simultaneously. StructuredTune owns two Tune instances. It's own play plays the two Tunes one after the other according to a pattern (currently only ABAB). Melody is an abstract class with an abstract play method. It has two subclasses: SimpleMelody and StructuredMelody. SimpleMelody is composed of an array of notes. Invoking play on it plays these notes one after the other. StructuredMelody is composed of an array of Melody objects. Invoking play on it plays these Melodyies one after the other. I think you're starting to see the pattern. Progression is also an abstract class with a play method and two subclasses: SimpleProgression and StructuredProgression, each composed differently and played differently. SimpleProgression owns an array of chords and plays them sequentially. StructuredProgression owns an array of Progressions and it's play implementation plays them sequentially. Every class has a corresponding Generator class. Tune, Melody and Progression are matched with corresponding abstract TuneGenerator, MelodyGenerator and ProgressionGenerator classes, each with an abstract generate method. For example MelodyGenerator defines an abstract Melody generate method. Each of the generators has two subclasses, Simple and Structured. So for example MelodyGenerator has a subclasses SimpleMelodyGenerator, with an implementation of generate that returns a SimpleMelody. (It's important to note that the generate methods encapsulate complex algorithms. They are more than mere factory method. For example SimpleProgressionGenerator.generate() implements an algorithm to compose a series of Chord objects, which are used to instantiate the returned SimpleProgression). Every Structured generator uses another generator internally. It is a Simple generator be default, but in special cases may be a Structured generator. Parts of this design are meant to allow the end-user through the GUI to choose what kind of music is to be created. For example the user can choose between a "simple tune" (SimpleTuneGenerator) and a "full tune" (StructuredTuneGenerator). Other parts of the system aren't subject to direct user-control. What do you think of this design from an OOD perspective? What potential problems do you see with this design? Please share with me your criticism, I'm here to learn. Apart from this, a more specific question: the "every class has a corresponding Generator class" part feels very wrong. However I'm not sure how I could design this differently and achieve the same flexibility. Any ideas?

  Read the article

• Is this spaghetti code already? [migrated]

  - by hephestos

  I post the following code writen all by hand. Why I have the feeling that it is a western spaghetti on its own. Second, could that be written better? <div id="form-board" class="notice" style="height: 200px; min-height: 109px; width: auto;display: none;"> <script type="text/javascript"> jQuery(document).ready(function(){ $(".form-button-slide").click(function(){ $( "#form-board" ).dialog(); return false; }); }); </script> <?php echo $this->Form->create('mysubmit'); echo $this->Form->input('inputs', array('type' => 'select', 'id' => 'inputs', 'options' => $inputs)); echo $this->Form->input('Fields', array('type' => 'select', 'id' => 'fields', 'empty' => '-- Pick a state first --')); echo $this->Form->input('inputs2', array('type' => 'select', 'id' => 'inputs2', 'options' => $inputs2)); echo $this->Form->input('Fields2', array('type' => 'select', 'id' => 'fields2', 'empty' => '-- Pick a state first --')); echo $this->Form->end("Submit"); ?> </div> <div style="width:100%"></div> <div class="form-button-slide" style="float:left;display:block;"> <?php echo $this->Html->link("Error Results", "#"); ?> </div> <script type="text/javascript"> jQuery(document).ready(function(){ $("#mysubmitIndexForm").submit(function() { // we want to store the values from the form input box, then send via ajax below jQuery.post("Staffs/view", { data1: $("#inputs").attr('value'), data2:$("#inputs2").attr('value'),data3:$("#fields").attr('value'), data4:$("#fields2").attr('value') } ); //Close the dialog $( "#form-board" ).dialog('close') return false; }); $("#inputs").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); $("#inputs2").change(function() { // we want to store the values from the form input box, then send via ajax below var input_id = $('#inputs2').attr('value'); $.ajax({ type: "POST", //The controller who listens to our request url: "Inputs/getFieldsFromOneInput/"+input_id, data: "input_id="+ input_id, //+"&amp; lname="+ lname, success: function(data){//function on success with returned data $('form#mysubmit').hide(function(){}); data = $.parseJSON(data); var sel = $("#fields2"); sel.empty(); for (var i=0; i<data.length; i++) { sel.append('<option value="' + data[i].id + '">' + data[i].name + '</option>'); } } }); return false; }); }); </script>

  Read the article

• how to access mysql table from wamp database using this php code? [migrated]

  - by user3909877

  how to access tables from database by using php in wamp server.i have done the following code but its not working for some reason.is there anything to put in 'action=""'.it is not giving any error but displaying the same page.i want to display table from database on any different entry in dropdown menu and pressing search button.. <p class="h2">Quick Search</p> <div class="sb2_opts"> <p> </p> <form method="post" action="" > <p>Enter your source and destination.</p> <p> From:</p> <select name="from"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <p> To:</p> <select name="To"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <input type="submit" value="search" /> </form> </form> </table> <?php if(isset($_POST['from']) and isset($_POST['To'])) { $from = $_POST['from'] ; $to = $_POST['To'] ; $table = array($from, $to); $con=mysqli_connect("localhost"); $mydb=mysql_select_db("homedb"); if (mysqli_connect_errno()) { echo "Failed to connect to MySQL: " . mysqli_connect_error(); } switch ($table) { case array ("Islamabad", "Lahore") : $result = mysqli_query($con,"SELECT * FROM flights"); echo "</flights>"; //table name is flights break; case array ("Islamabad", "Murree") : $result = mysqli_query($con,"SELECT * FROM `isb to murree`"); echo "</`isb to murree`>"; //table name isb to murree ; break; case array ("Islamabad", "Muzaffarabad") : $result = mysqli_query($con,"SELECT * FROM `isb to muzz`"); echo "</`isb to muzz`>"; break; //..... //...... default: echo "Your choice is nor valid !!"; } } mysqli_close($con); ?>

  Read the article

• post xml to Spring REST server returns Unsupported Media Type

  - by Mayra

  I'm trying to create a simple spring based webservice that supports a "post" with xml content. In spring, I define an AnnotationMethodHandler: <bean id="inboundMessageAdapter" class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter"> <property name="messageConverters"> <util:list> <bean class="org.springframework.http.converter.xml.MarshallingHttpMessageConverter"> <property name="marshaller" ref="xmlMarshaller"/> <property name="unmarshaller" ref="xmlMarshaller"/> </bean> </util:list> </property> </bean> And a jaxb based xml marshaller: <bean id="xmlMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="contextPaths"> <array> <value>com.company.schema</value> </array> </property> <property name="schemas"> <array> <value>classpath:core.xsd</value> </array> </property> </bean> My controller is annotated as follows, where "Resource" is a class autogenerated by jaxb: @RequestMapping(method = POST, value = "/resource") public Resource createResource(@RequestBody Resource resource) { // do work } The result of a webservice call is always "HTTP/1.1 415 Unsupported Media Type". Here is an example service call: HttpPost post = new HttpPost(uri); post.addHeader("Accept", "application/xml"); post.addHeader("Content-Type", "application/xml"); StringEntity entity = new StringEntity(request, "UTF-8"); entity.setContentType("application/xml"); post.setEntity(entity); It seems to me that I am setting the correct media type everywhere possible. Anyone have an ideas?

  Read the article

• Uncaught SyntaxError: Unexpected token ILLEGAL

  - by sathis

  May i know whats wrong inside this.I am new world of programing ..So if you help me it would be wonderful.The error comes on the line arr[${i.count-1}][1]=${employee.email}; Awaiting for your response.The entire Code as follows.. $(function() { var arr = new Array(); arr[0]=new Array(4); arr[0][0]=sathis; arr[0][1][email protected]; arr[0][2]=namakkal; arr[0][3]=21; arr[1]=new Array(4); arr[1][0]=ganesh; arr[1][1][email protected]; arr[1][2]=karaikudi; arr[1][3]=22; arr[2]=new Array(4); arr[2][0]=karthik; arr[2][1][email protected]; arr[2][2]=trichy; arr[2][3]=25; var str="<table><tr><th>Name</th><th>Email</th><th>City</th><th>Age</th></tr><tr><td>"; $("#emp_name").change(function() { var i=$(this).val(); str=str+arr[i-1][0]+"</td><td>"+arr[i-1][1]+"</td><td>"+arr[i-1][2]+"</td><td>"+arr[i-1][3]+"</td><tr></table>"; $("#viewer").html(str); alert(str); }); });

  Read the article

• Iphone xCode - Navigation Controller on second xib view?

  - by Frames84

  Everything is fine, my navigation controller display's my 'Menu 1' item, but when i click it there appears to be a problem with the: [self.navigationController pushViewController:c animated:YES]; line it doesn't connect to the break point in the myClass file. so I think i've not joined something? but unsure what? my second view with the navigation controller doesn't have direct access to the AppDelegate so can't join it like i see in some tutorials. 1st view is just a button when clicked calls: [self presentModalViewController:mainViewController animated:YES]; my second View 'MainViewController' header looks like: @interface MainViewController :UITableViewController <UITableViewDelegate, UITableViewDataSource> { NSArray *controllers; UINavigationController *navController; } @property (nonatomic, retain) IBOutlet UINavigationController *navControllers; @property (nonatomic, retain) NSArray *controller; Then I have my MainViewController.m @synthesize controllers; @synthesize navController; - (void) viewDidLoad { NSMutableArray *array = [[NSMutaleArray alloc] init]; myClass *c = [[myClass alloc] initWithStyle:UITableViewStylePlain]; c.Title = @"Menu 1"; [array addObject:c]; self.Controllers = array; [array release]; } implemented numberOfRowsInSection and cellForRowAtIndexPath - (void) tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSUInteger row = [indexPath row]; myClass *c = [self.controllers objectAtIndex:row]; [self.navigationController pushViewController:c animated:YES]; // doesn't load myClass c // [self.navController pushViewController:c animated:YES]; } Also in interface designer I dragged a Navigation Controller onto my new XIB and changed the Root View Controller class to MainViewController and also connected the File Owner connector to the Navigation Controller to connect the navController Outlet. Thanks for you time.

  Read the article

• Ext.data.Store, Javascript Arrays and Ext.grid.ColumnModel

  - by Michael Wales

  I am using Ext.data.Store to call a PHP script which returns a JSON response with some metadata about fields that will be used in a query (unique name, table, field, and user-friendly title). I then loop through each of the Ext.data.Record objects, placing the data I need into an array (this_column), push that array onto the end of another array (columns), and eventually pass this to an Ext.grid.ColumnModel object. The problem I am having is - no matter which query I am testing against (I have a number of them, varying in size and complexity), the columns array always works as expected up to columns[15]. At columns[16], all indexes from that point and previous are filled with the value of columns[15]. This behavior continues until the loop reaches the end of the Ext.data.Store object, when the entire arrays consists of the same value. Here's some code: columns = []; this_column = []; var MetaData = Ext.data.Record.create([ {name: 'id'}, {name: 'table'}, {name: 'field'}, {name: 'title'} ]); // Query the server for metadata for the query we're about to run metaDataStore = new Ext.data.Store({ autoLoad: true, reader: new Ext.data.JsonReader({ totalProperty: 'results', root: 'fields', id: 'id' }, MetaData), proxy: new Ext.data.HttpProxy({ url: 'index.php/' + type + '/' + slug }), listeners: { 'load': function () { metaDataStore.each(function(r) { this_column['id'] = r.data['id']; this_column['header'] = r.data['title']; this_column['sortable'] = true; this_column['dataIndex'] = r.data['table'] + '.' + r.data['field']; // This display valid information, through the entire process console.info(this_column['id'] + ' : ' + this_column['header'] + ' : ' + this_column['sortable'] + ' : ' + this_column['dataIndex']); columns.push(this_column); }); // This goes nuts at columns[15] console.info(columns); gridColModel = new Ext.grid.ColumnModel({ columns: columns });

  Read the article

• Passing binary blob through an Android content provider

  - by velocityb0y

  I have a content provider that is custom to my set of Android applications, and one of the things it needs to expose is a small (20-30k) byte array. The uri for these blobs looks like content://my.authority/blob/# where # is the row number; the resulting cursor has the standard _id column and a data column. I'm using a MatrixCursor in the provider's query method: byte[] byteData = getMyByteData(); MatrixCursor mc = new MatrixCursor(COLUMNS); mc.addRow(new Object[] { id, byteData }); Later, in the application consuming the data, I do Cursor c = managedQuery(uri, null, null, null, null); c.moveToFirst(); byte[] data = c.getBlob(c.getColumnIndexOrThrow("data")); However, data does not contain the contents of my original byte array; rather, it contains something like "[B@435cc518", which looks more like the address of the array than the contents. I tried wrapping the byte array in an implementation of java.sql.Blob, figuring that it might be looking for that since the content provider subsystem was written to be easy to use with SQLite, but it didn't help. Has anyone gotten this to work? If the data was in the file system, there are methods in ContentProvider that I could use to provide a marshalled InputStream to the client, but the data I'm trying to send back lives as a resource in the content provider's APK.

  Read the article

• Problem with File IO and splitting strings with Environment.NewLine in VB.Net

  - by Senthil

  Hi, I was experimenting with basic VB.Net file read/write and encountered this problem. I don't know whether it has something to do with the File IO or the String splitting. I am writing text to a file like so Dim sWriter As New StreamWriter("Data.txt") sWriter.WriteLine("FirstItem") sWriter.WriteLine("SecondItem") sWriter.WriteLine("ThirdItem") sWriter.Close() Then, I am reading the text from the file Dim sReader As New StreamReader("Data.txt") Dim fileContents As String = sReader.ReadToEnd() sReader.Close() Now, I am splitting the fileContents variable using Environment.NewLine and saving the returned String array. Dim tempStr() As String = fileContents.Split(Environment.NewLine) When I print the array, I get some weird results For Each str As String In tempStr Console.WriteLine("*" + str + "*") Next I added the *'s to the beginning and end to find out what is going on. Since NewLine is used as the delimiter, I expect the strings in the array to NOT have any NewLine's. But the output was this - *FirstItem* * SecondItem* * ThirdItem* * * Shouldn't it be this - *FirstItem* *SecondItem* *ThirdItem* ?? Since I am using WriteLine, my guess is a new line is added after the last string and hence the last empty item in the array after splitting. But why is there a new line in the beginning of the second and third strings?

  Read the article

• Can I convert an ASCII MD5 hashed password into a Unicode MD5 hashed password?

  - by Jimmy Moo Moo

  Hello, I'm looking for help to convert an ASCII MD5 hashed password into a Unicode MD5 hashed password? For example, I'll use the string "password" . When it's converted to an ascii byte array, I get a base64 encoded hash of X03MO1qnZdYdgyfeuILPmQ== When it's converted into a unicode byte array, I get a base64 encoded hash of sIHb6F4ew//D1OfQInQAzQ== All my passwords are stored in an md5 hash that was applied to an ascii byte array, but I'm trying to migrate my application's user data to a system that stores password in an md5 hash that is applied a unicode byte array. In case it's not clear, with the following C#code: var passwordBytes = Encoding.ASCII.GetBytes("password"); var hashAlgorithm = HashAlgorithm.Create("MD5"); var hashBytes = hashAlgorithm.ComputeHash(passwordBytes); My current system uses this, but the system I'm moving to has a diff first time. It usese Encoding.Unicode.GetBytes. Does anybody know how I can convert my passwords? From X03MO1qnZdYdgyfeuILPmQ== into sIHb6F4ew//D1OfQInQAzQ== I'm guessing the answer is that I can't.. the encoding is being done before the hashing, but I thought I'd inquire the bright minds of stackoverflow and see if anybody has a way.

  Read the article

• Custom UITableViewCell won't redraw on setNeedsDisplay

  - by Andrew Portner

  I created a custom UITableViewCell class with a UIButton, a UIImage, and two UILabels. The button and the image are overlayed on top of each other, and only one is displayed at a time. The expected behavior is you touch on the button, the button disappears, and it displays the image. The UITableViewCells are set to be reused. Here's my code: Constructor: - (id)initWithStyle:(UITableViewCellStyle)style reuseIdentifier:(NSString *)reuseIdentifier { if (self = [super initWithStyle:style reuseIdentifier:reuseIdentifier]) { unheartButton = [[UIButton buttonWithType:UIButtonTypeCustom] retain]; unheartButton.backgroundColor = [UIColor clearColor]; unheartButton.frame = CGRectMake(10, 13, 20, 18); [unheartButton addTarget:self action:@selector(onButtonClick:) forControlEvents:UIControlEventTouchUpInside]; [unheartButton setBackgroundImage:[UIImage imageNamed:@"redheart.png"] forState:UIControlStateNormal]; imageView = [[UIImageView alloc] init]; imageView.frame = CGRectMake(12, 13, 16, 16); NSMutableArray *array = [[NSMutableArray alloc] init]; for (int ndx = 1; ndx < 13; ndx++) { [array addObject:[UIImage imageNamed:[NSString stringWithFormat:@"icon-loading-%d (dragged).tiff", ndx]]]; } imageView.animationImages = array; imageView.animationDuration = 1; imageView.hidden = YES; [array release]; [self.contentView addSubview:imageView]; [self.contentView addSubview:unheartButton]; return self; } } Button click: - (IBAction) onButtonClick: (id) sender { unheartButton.hidden = YES; imageView.hidden = NO; [imageView startAnimating]; [self setNeedsDisplay]; [self.contentView setNeedsDisplay]; [self.unheartButton setNeedsDisplay]; [self.imageView setNeedsDisplay]; } I'm calling setNeedsDisplay on everything, but nothing seems to happen. If I scroll off the screen and back up, the button is hidden and now the loading icon is shown, but this only happens after a scroll. I'm not sure what I need to do to get the cell to repaint.

  Read the article

• -[CFString length]: message sent to deallocated instance 0x3881940 when i scroll to near the bottom

  - by James

  Hey guys, i've got a problem debugging an iphone app that i'm attempting to write and it's got me stumped, bear with me, i'm a n00b to programming and might get some of the terminology wrong but i'll try to explain it as best as i can. The app gets an XML doc from the a web site, parses it into an array, and then displays it in a table view, i have the parser in a separate file. The ViewDidLoad in RootViewController sends it a url, the parser goes to work and then returns an NSMutableArray. When i run the app it works fine with small XML files (5 entries or so, and 1-3 sections), but when i use a larger one(20+ rows, over 12 sections) i get the error "-[CFString length]: message sent to deallocated instance 0x3881940" when i scroll near the bottom of the tableview, just as the last section title is about to come onto the viewable area on the screen to be precise. if i return a static string instead of the object in my array in this method it doesn't crash, but i can use NSLog to call the array and it returns the title no problems. - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)indexPath { return [[returnedEvents objectAtIndex:indexPath ] objectAtIndex:0]; } The returnedEvents array isn't released until -(void) dealloc {} I have read a few other posts on here, and a few guides on debugging and as of yet am unable to find anything that was able to help me, i'd be more than happy to post some code up here and any more information, i'm just not sure where to start... Thanks in advance for anyone willing to have a go at helping me out.

  Read the article

• get form input fields with jQuery?

  - by Vasil

  I have a form with a lot of input fields. When I catch the submit form event with jQuery, is it possible to get all the input fields of that form in an associative array?

  Read the article

• Zend Framework subdomain+subfolder router rewrite problem

  - by zf_novice

  I'm new to Zend Framwork and this is an issue I've been struggling for several hours already... I'm trying to chain Hostname and standard Route in order to get url with subdomain+subfolders ie.: http:// lang.mydomain.com/myapplication/public/controller http:// lang.mydomain.com/myapplication/public/controller/action (sorry for the empty space in the address, this site won't allow links) Basically what I have done in Bootstrap is: // add language to default route $routePath = new Zend_Controller_Router_Route( ':controller/:action/*', array('controller'=>'index','action' => 'index','module'=>'default') ); $routeHostname = new Zend_Controller_Router_Route_Hostname( ':lang.mydomain.com', array('lang'=>$lang) ); $frontController = $this->getResource('FrontController'); $router = $frontController->getRouter(); $router->addRoute('default', $routeHostname->chain($routePath)) $frontController->setRouter($router); it finds the route ok, but every time I generate url in view or layout by $this-url() <?php echo $this->url( array( 'controller'=> 'guestbook', 'action' => 'sign', 'lang' => Zend_Registry::get('lang'), ), 'default', true) ?>"> I get http:// lang.mydomain.com/controller instead of http:// lang.mydomain.com/myapplication/public/controller I've been trying to set baseUrl on front controller but no luck... Also I've tried the static route with myapplication/public or following standard route: 'myapplication/public/:controller/:action/*' - it result with "An error occurred Page not found Exception information: Message: No route matched the request" and empty request Is there any way to assembly subdomain with subfolder in Zend Framwork?? EDIT: I changed above to: $frontController->setBaseUrl('.'); // add language to default route $routePath = new Zend_Controller_Router_Route( 'quickstart/public/:controller/:action/*', array( 'controller'=>'index', 'action' => 'index', 'module'=>'default', ) ); and it works form me, although I'm not sure whether it's been correct approach...

  Read the article

• Big and Little endian question

  - by Bobby

  I have the following code: // Incrementer datastores.cmtDatastores.u32Region[0] += 1; // Decrementer datastores.cmtDatastores.u32Region[1] = (datastores.cmtDatastores.u32Region[1] == 0) ? 10 : datastores.cmtDatastores.u32Region[1] - 1; // Toggler datastores.cmtDatastores.u32Region[2] = (datastores.cmtDatastores.u32Region[2] == 0x0000) ? 0xFFFF : 0x0000; The u32Region array is an unsigned int array that is part of a struct. Later in the code I convert this array to Big endian format: unsigned long *swapL = (unsigned long*)&datastores.cmtDatastores.u32Region[50]; for (int i=0;i<50;i++) { swapL[i] = _byteswap_ulong(swapL[i]); } This entire code snippet is part of a loop that repeats indefinitely. It is a contrived program that increments one element, decrements another and toggles a third element. The array is then sent via TCP to another machine that unpacks this data. The first loop works fine. After that, since the data is in big endian format, when I "increment", "decrement", and "toggle", the values are incorrect. Obviously, if in the first loop datastores.cmtDatastores.u32Region[0] += 1; results in 1, the second loop it should be 2, but it's not. It is adding the number 1(little endian) to the number in datastores.cmtDatastores.u32Region[0](big endian). I guess I have to revert back to little endian at the start of every loop, but it appears there should be an easier way to do this. Any thoughts? Thanks, Bobby

  Read the article

• OpenGL-ES: Change (multiply) color when using color arrays?

  - by arberg

  Following the ideas in OpenGL ES iPhone - drawing anti aliased lines, I am trying to draw stroked anti-aliased lines and I am successful so far. After line is draw by the finger, I wish to fade the path, that is I need to change the opacity (color) of the entire path. I have computed a large array of vertex positions, vertex colors, texture coordinates, and indices and then I give these to opengl but I would like reduce the opacity of all the drawn triangles without having to change each of the color coordinates. Normally I would use glColor4f(r,g,b,a) before calling drawElements, but it has no effect due to the color array. I am working on Android, but I believe it shouldn't make the big difference, as long as it is OpenGL-ES 1.1 (or 1.0). I have the following code : gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_ONE, GL10.GL_ONE_MINUS_SRC_ALPHA); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glShadeModel(GL10.GL_SMOOTH); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glEnable(GL10.GL_TEXTURE_2D); // Should set rgb to greyish, and alpha to half-transparent, the greyish is // just there to make the question more general its the alpha i'm interested in gl.glColor4f(.75f, .75f, .75f, 0.5f); gl.glVertexPointer(mVertexSize, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, mTexCoordBuffer); gl.glDrawElements(GL10.GL_TRIANGLES, indexCount, GL10.GL_UNSIGNED_SHORT, mIndexBuffer.position(startIndex)); If I disable the color array gl.glEnableClientState(GL10.GL_COLOR_ARRAY);, then the glColor4f works, if I enable the color array it does nothing. Is there any way in OpenGl-ES to change the coloring without changing all the color coordinates? I think that in OpenGl one might use a fragment shader, but it seems OpenGL does not have a fragment shader (not that I know how to use one).

  Read the article

• Modify code to change timestamp timezone in sitemap

  - by Aahan Krish

  Below is the code from a plugin I use for sitemaps. I would like to know if there's a way to "enforce" a different timezone on all date variable and functions in it. If not, how do I modify the code to change the timestamp to reflect a different timezone? Say for example, to America/New_York timezone. Please look for date to quickly get to the appropriate code blocks. Code on Pastebin. <?php /** * @package XML_Sitemaps */ class WPSEO_Sitemaps { ..... /** * Build the root sitemap -- example.com/sitemap_index.xml -- which lists sub-sitemaps * for other content types. * * @todo lastmod for sitemaps? */ function build_root_map() { global $wpdb; $options = get_wpseo_options(); $this->sitemap = '<sitemapindex xmlns="http://www.sitemaps.org/schemas/sitemap/0.9">' . "\n"; $base = $GLOBALS['wp_rewrite']->using_index_permalinks() ? 'index.php/' : ''; // reference post type specific sitemaps foreach ( get_post_types( array( 'public' => true ) ) as $post_type ) { if ( $post_type == 'attachment' ) continue; if ( isset( $options['post_types-' . $post_type . '-not_in_sitemap'] ) && $options['post_types-' . $post_type . '-not_in_sitemap'] ) continue; $count = $wpdb->get_var( $wpdb->prepare( "SELECT COUNT(ID) FROM $wpdb->posts WHERE post_type = %s AND post_status = 'publish' LIMIT 1", $post_type ) ); // don't include post types with no posts if ( !$count ) continue; $n = ( $count > 1000 ) ? (int) ceil( $count / 1000 ) : 1; for ( $i = 0; $i < $n; $i++ ) { $count = ( $n > 1 ) ? $i + 1 : ''; if ( empty( $count ) || $count == $n ) { $date = $this->get_last_modified( $post_type ); } else { $date = $wpdb->get_var( $wpdb->prepare( "SELECT post_modified_gmt FROM $wpdb->posts WHERE post_status = 'publish' AND post_type = %s ORDER BY post_modified_gmt ASC LIMIT 1 OFFSET %d", $post_type, $i * 1000 + 999 ) ); $date = date( 'c', strtotime( $date ) ); } $this->sitemap .= '<sitemap>' . "\n"; $this->sitemap .= '<loc>' . home_url( $base . $post_type . '-sitemap' . $count . '.xml' ) . '</loc>' . "\n"; $this->sitemap .= '<lastmod>' . htmlspecialchars( $date ) . '</lastmod>' . "\n"; $this->sitemap .= '</sitemap>' . "\n"; } } // reference taxonomy specific sitemaps foreach ( get_taxonomies( array( 'public' => true ) ) as $tax ) { if ( in_array( $tax, array( 'link_category', 'nav_menu', 'post_format' ) ) ) continue; if ( isset( $options['taxonomies-' . $tax . '-not_in_sitemap'] ) && $options['taxonomies-' . $tax . '-not_in_sitemap'] ) continue; // don't include taxonomies with no terms if ( !$wpdb->get_var( $wpdb->prepare( "SELECT term_id FROM $wpdb->term_taxonomy WHERE taxonomy = %s AND count != 0 LIMIT 1", $tax ) ) ) continue; // Retrieve the post_types that are registered to this taxonomy and then retrieve last modified date for all of those combined. $taxobj = get_taxonomy( $tax ); $date = $this->get_last_modified( $taxobj->object_type ); $this->sitemap .= '<sitemap>' . "\n"; $this->sitemap .= '<loc>' . home_url( $base . $tax . '-sitemap.xml' ) . '</loc>' . "\n"; $this->sitemap .= '<lastmod>' . htmlspecialchars( $date ) . '</lastmod>' . "\n"; $this->sitemap .= '</sitemap>' . "\n"; } // allow other plugins to add their sitemaps to the index $this->sitemap .= apply_filters( 'wpseo_sitemap_index', '' ); $this->sitemap .= '</sitemapindex>'; } /** * Build a sub-sitemap for a specific post type -- example.com/post_type-sitemap.xml * * @param string $post_type Registered post type's slug */ function build_post_type_map( $post_type ) { $options = get_wpseo_options(); ............ // We grab post_date, post_name, post_author and post_status too so we can throw these objects into get_permalink, which saves a get_post call for each permalink. while ( $total > $offset ) { $join_filter = apply_filters( 'wpseo_posts_join', '', $post_type ); $where_filter = apply_filters( 'wpseo_posts_where', '', $post_type ); // Optimized query per this thread: http://wordpress.org/support/topic/plugin-wordpress-seo-by-yoast-performance-suggestion // Also see http://explainextended.com/2009/10/23/mysql-order-by-limit-performance-late-row-lookups/ $posts = $wpdb->get_results( "SELECT l.ID, post_content, post_name, post_author, post_parent, post_modified_gmt, post_date, post_date_gmt FROM ( SELECT ID FROM $wpdb->posts {$join_filter} WHERE post_status = 'publish' AND post_password = '' AND post_type = '$post_type' {$where_filter} ORDER BY post_modified ASC LIMIT $steps OFFSET $offset ) o JOIN $wpdb->posts l ON l.ID = o.ID ORDER BY l.ID" ); /* $posts = $wpdb->get_results("SELECT ID, post_content, post_name, post_author, post_parent, post_modified_gmt, post_date, post_date_gmt FROM $wpdb->posts {$join_filter} WHERE post_status = 'publish' AND post_password = '' AND post_type = '$post_type' {$where_filter} ORDER BY post_modified ASC LIMIT $steps OFFSET $offset"); */ $offset = $offset + $steps; foreach ( $posts as $p ) { $p->post_type = $post_type; $p->post_status = 'publish'; $p->filter = 'sample'; if ( wpseo_get_value( 'meta-robots-noindex', $p->ID ) && wpseo_get_value( 'sitemap-include', $p->ID ) != 'always' ) continue; if ( wpseo_get_value( 'sitemap-include', $p->ID ) == 'never' ) continue; if ( wpseo_get_value( 'redirect', $p->ID ) && strlen( wpseo_get_value( 'redirect', $p->ID ) ) > 0 ) continue; $url = array(); $url['mod'] = ( isset( $p->post_modified_gmt ) && $p->post_modified_gmt != '0000-00-00 00:00:00' ) ? $p->post_modified_gmt : $p->post_date_gmt; $url['chf'] = 'weekly'; $url['loc'] = get_permalink( $p ); ............. } /** * Build a sub-sitemap for a specific taxonomy -- example.com/tax-sitemap.xml * * @param string $taxonomy Registered taxonomy's slug */ function build_tax_map( $taxonomy ) { $options = get_wpseo_options(); .......... // Grab last modified date $sql = "SELECT MAX(p.post_date) AS lastmod FROM $wpdb->posts AS p INNER JOIN $wpdb->term_relationships AS term_rel ON term_rel.object_id = p.ID INNER JOIN $wpdb->term_taxonomy AS term_tax ON term_tax.term_taxonomy_id = term_rel.term_taxonomy_id AND term_tax.taxonomy = '$c->taxonomy' AND term_tax.term_id = $c->term_id WHERE p.post_status = 'publish' AND p.post_password = ''"; $url['mod'] = $wpdb->get_var( $sql ); $url['chf'] = 'weekly'; $output .= $this->sitemap_url( $url ); } } /** * Build the <url> tag for a given URL. * * @param array $url Array of parts that make up this entry * @return string */ function sitemap_url( $url ) { if ( isset( $url['mod'] ) ) $date = mysql2date( "Y-m-d\TH:i:s+00:00", $url['mod'] ); else $date = date( 'c' ); $output = "\t<url>\n"; $output .= "\t\t<loc>" . $url['loc'] . "</loc>\n"; $output .= "\t\t<lastmod>" . $date . "</lastmod>\n"; $output .= "\t\t<changefreq>" . $url['chf'] . "</changefreq>\n"; $output .= "\t\t<priority>" . str_replace( ',', '.', $url['pri'] ) . "</priority>\n"; if ( isset( $url['images'] ) && count( $url['images'] ) > 0 ) { foreach ( $url['images'] as $img ) { $output .= "\t\t<image:image>\n"; $output .= "\t\t\t<image:loc>" . esc_html( $img['src'] ) . "</image:loc>\n"; if ( isset( $img['title'] ) ) $output .= "\t\t\t<image:title>" . _wp_specialchars( html_entity_decode( $img['title'], ENT_QUOTES, get_bloginfo('charset') ) ) . "</image:title>\n"; if ( isset( $img['alt'] ) ) $output .= "\t\t\t<image:caption>" . _wp_specialchars( html_entity_decode( $img['alt'], ENT_QUOTES, get_bloginfo('charset') ) ) . "</image:caption>\n"; $output .= "\t\t</image:image>\n"; } } $output .= "\t</url>\n"; return $output; } /** * Get the modification date for the last modified post in the post type: * * @param array $post_types Post types to get the last modification date for * @return string */ function get_last_modified( $post_types ) { global $wpdb; if ( !is_array( $post_types ) ) $post_types = array( $post_types ); $result = 0; foreach ( $post_types as $post_type ) { $key = 'lastpostmodified:gmt:' . $post_type; $date = wp_cache_get( $key, 'timeinfo' ); if ( !$date ) { $date = $wpdb->get_var( $wpdb->prepare( "SELECT post_modified_gmt FROM $wpdb->posts WHERE post_status = 'publish' AND post_type = %s ORDER BY post_modified_gmt DESC LIMIT 1", $post_type ) ); if ( $date ) wp_cache_set( $key, $date, 'timeinfo' ); } if ( strtotime( $date ) > $result ) $result = strtotime( $date ); } // Transform to W3C Date format. $result = date( 'c', $result ); return $result; } } global $wpseo_sitemaps; $wpseo_sitemaps = new WPSEO_Sitemaps();

  Read the article

• Base64 en/decoding between xstream and iPhone SDK

  - by Matt McMinn

  I am passing a byte array from a java server to an iPad client in XML. The server is using xstream to convert the byte array to XML with the EncodedByteArrayConverter, which should convert the array to Base 64. Using xstream, I can decode the xml back to the proper byte array in a java client, but in the iPad client, I'm getting an invalid length error. To do my decoding, I'm using the code at the bottom of this page. The length of the string is indeed not a multiple of 4, so there must be something strange with my string - although since xstream can decode it just fine, I'm guessing there's just something I need to to on the iPad side to get it to decode. I've tried cutting off padding at the end of the string to get it down to the right size, and that does allow the decoder to work, but I end up with JPG's that have invalid headers, and are not displayable. On the server side, I'm using the following code: Object rtrn = getByteArray(); XStream xstream = new XStream(); String xml = xstream.toXML(rtrn); On the client side, I'm calling the above decoder from the XML parsing callback like this: -(void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { NSLog(@"Converting data; string length: %d", [string length]); //NSLog(@"%@", string); NSData *data = [Base64 decode:string]; NSLog(@"converted data length: %d", [data length]); } Any ideas what could be going wrong?

  Read the article

• Update table columns bound to NSArrayController

  - by Loz

  Hi, I'm fairly new to the world of bindings in cocoa, and I'm having some troubles (perhaps/probably due to a misunderstanding). I have a singleton that contains an NSMutableArray called plugins, containing objects of class Plugin. It has a method called loadPlugins which adds objects to the plugins array. This may be called at any point. It's been added as an instance in Interface Builder. Also in IB is an NSObjectController, whose content outlet is connected to the singleton. There is also an NSArrayController, whose contentArray is bound to the NSObjectController (controller key is 'selection', model key path is 'plugins', object class name is 'Plugin'). And finally I have a table view with 2 columns, the values of which are bound to the NSArrayController's arrangedObjects, using keys of properties in the Plugin class. So far so standard (as far as I can tell from tutorials at least). My trouble is that when the loadPlugins method is called in the singleton, and objects are added to the plugins array, the table doesn't update to show the objects (unless loadPlugins is called before the nib is loaded). -reloadData called on the tableView doesn't do anything. Is there a way to tell the NSArrayController that the referenced array has been updated? I understand there is the -add: method for NSArrayController, which could be used in the loadPlugins, but this isn't desirable as I want to keep the singleton totally separate from the display aspect. This seems related to: http://stackoverflow.com/questions/1623396/refresh-cocoa-binding-nsarraycontroller-combobox The line: "editing the array behind the controller's back" seems to perhaps pinpoint the problem, but I would hope that it would be possible to have the singleton not know about the controller. Thanks in advance.

  Read the article

• Zend Cache is not retrieving cache items after some period of time

  - by Phil

  Hi, I am using Zend Cache with page caching but it seems to miss the cache after a period of time. For a while it is OK, but I come back tomorrow and hit the page, it doesn't fetch the contents from the cache. why? $frontendOptions = array( 'content_type_memorization' => true, // This remembers the headers, needed for images 'lifetime' => NULL, // cache lifetime forever 'automatic_serialization' => true, 'automatic_cleaning_factor' => 0 ); $myPageCache = new Zend_Cache_Frontend_Page(array( 'debug_header' => false, 'automatic_cleaning_factor'=>0, 'content_type_memorization' => true, 'default_options' => array( 'cache' => true, 'cache_with_get_variables' => true, 'cache_with_post_variables' => true, 'cache_with_session_variables' => true, 'cache_with_cookie_variables' => true ))); $backendOptions = array('cache_dir' => '.' . DIRECTORY_SEPARATOR . 'cache' . DIRECTORY_SEPARATOR); $cache = Zend_Cache::factory($myPageCache, 'File', $frontendOptions, $backendOptions); $cacheKey = hash('md5', "cache_" . $cachePath); // cachePath is the key I use for the cache if(!$cache->start($cacheKey)) { I output html here $cache->end(); }

  Read the article

• Static Data Structures on Embedded Devices (Android in particular)

  - by Mark

  I've started working on some Android applications and have a question regarding how people normally deal with situations where you have a static data set and have an application where that data is needed in memory as one of the standard java collections or as an array. In my current specific issue i have a spreadsheet with some pre-calculated data. It consists of ~100 rows and 3 columns. 1 Column is a string, 1 column is a float, 1 column is an integer. I need access to this data as an array in java. It seems like i could: 1) Encode in XML - This would be cpu intensive to decode in my experience. 2) build into SQLite database - seems like a lot of overhead for static access to data i only need array style access to in ram. 3) Build into binary blob and read in. (never done this in java, i miss void *) 4) Build a python script to take the CSV version of my data and spit out a java function that adds the values to my desired structure with hard coded values. 5) Store a string array via androids resource mechanism and compute the other 2 columns on application load. In my case the computation would require a lot of calls to Math.log, Math.pow and Math.floor which i'd rather not have to do for load time and battery usage reasons. I mostly work in low power embedded applications in C and as such #4 is what i'm used to doing in these situations. It just seems like it should be far easier to gain access to static data structures in java/android. Perhaps I'm just being too battery usage conscious and in my single case i imagine the answer is that it doesn't matter much, but if every application took that stance it could begin to matter. What approaches do people usually take in this situation? Anything I missed?

  Read the article

• cleaning up noise in an edge detection algoritum

  - by Faken

  I recently wrote an extremely basic edge detection algorithm that works on an array of chars. The program was meant to detect the edges of blobs of a single particular value on the array and worked by simply looking left, right, up and down on the array element and checking if one of those values is not the same as the value it was currently looking at. The goal was not to produce a mathematical line but rather a set of ordered points that represented a descritized closed loop edge. The algorithm works perfectly fine, except that my data contained a bit of noise hence would randomly produce edges where there should be no edges. This in turn wreaked havoc on some of my other programs down the line. There is two types of noise that the data contains. The first type is fairly sparse and somewhat random. The second type is a semi continuous straight line on the x=y axis. I know the source of the first type of noise, its a feature of the data and there is nothing i can do about it. As for the second type, i know it's my program's fault for causing it...though i haven't a hot clue exactly what is causing it. My question is: How should I go about removing the noise completely? I know that the correct data has points that are always beside each other and is very compact and ordered (with no gaps) and is a closed loop or multiple loops. The first type of noise is usually sparse and random, that could be easily taken care of by checking if any edges is next that noise point is also counted as an edge. If not, then the point is most defiantly noise and should be removed. However, the second type of noise, where we have a semi continuous line about x=y poses more of a problem. The line is sometimes continuous for random lengths (the longest was it went half way across my entire array unbroken). It is even possible for it to intersect the actual edge. Any ideas on how to do this?

  Read the article

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234  | Next Page >