route planning - Page 227

Routing with VPN and asymmetric communication

- by Louis

I'm stumbling on a problem that requires your advice. Keywords : networking, route, openVPN Problem : I have a local network with several physical servers and VMs. These machines have ip's in the range 10.10.x.x. I can access these machines from the Internet with the help of openVPN. These machines can : access each other within the local 10.10.x.x subnet access the Internet via the VPN can themselves be accessed (via SSH) from the Internet via the VPN. There is one machine however that behaves strangely and I don't know why. I can SSH into this machine from anywhere via SSH and I can also PING it from anywhere (including the Internet). However from this machine (i.e. when logged into it) I cannot access the Internet or ping machines outside the local network. In other words it will not go beyond the VPN. My question is why? Here are some technical details: The machine's Network Config (running Debian 6.0.3): allow-hotplug eth0 iface eth0 inet static address 10.10.10.200 netmask 255.255.0.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.200 The machine's Routing : Destination Gateway Genmask Flags MSS Window irtt Iface 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.10.0.0 10.10.10.250 255.255.0.0 UG 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.10.10.200 0.0.0.0 UG 0 0 0 eth0 The VPN's Network Config (running Debian 6.0.3): # This is the local network interface auto eth1 allow-hotplug eth1 iface eth1 inet static address 10.10.10.250 netmask 255.255.0.0 broadcast 10.10.10.255 gateway 10.10.10.250 The VPN's routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 private 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 private 0.0.0.0 UG 0 0 0 eth0 net.ipv4.ip_forward = 1 on both machines. there are no iptables set anywhere. Thanks in advance for any feedback.

Read the article

iotop for Linux kernel 2.6.18

- by Lightsauce

So it has to come to my attention that iotop isn't availalbe for 2.6.18 since it's less than 2.6.20 and requires Python 2.6+. I've done some research and came across this article: http://lserinol.blogspot.com/2009/09/io-usage-per-process-on-linux.html According to this, if these process have io stats in /proc/pid#/io (where pid# is the process #) it's doable regardless of the kernel version. So, in reality, I could upgrade Python to 2.6 and test out iotop. However, my flavor of Linux, CentOS release 5.5 (Final), only supports Python 2.4.3-44.el5 currently. If I were to do uninstall from yum, it doesn't look so pretty. It ends up wanting to uninstall 235 packages, most of which are very important! I read in one place, online (I forget the URL from yesterday), that you can install Python 2.6+ parallel to this one, and have the rpm install for iotop use that. Well, I didn't choose that route. I figured, what the heck, lets write iotop (not copying it, but reverse engineering it without actually looking at it's code/it in use) in bash. I thought it would just grab the /proc/pid#/io file and parse stats. So I wrote a script to grab the top 10 rchar, wchar, read_bytes, and write_bytes by collecting all these stats from all the /proc/pid#/io files, sorting them by each metric, then grabbing the top 10 highest values. The conclusion, the data seems completely useless. Does anybody know any resources for advanced Linux where I can figure out how to take these /proc/pid#/ directories and figure out what the heck they are doing with io on the disk? My main goal is to figure out what exactly is causing high load on my disk. I just know it's on the / partition (/dev/sda2 in this case), and I'm not really sure how to narrow it down without the help of iotop. If I run iostat to grab metrics for 1 minute, every second, the first result it gives me shows a high 'kB_read/s', so that makes me think, it's reading mostly. However, if I watch the update it gives me every second, it's actually just showing values for kB_wrtn/s. This makes me think the initial value iostat gives me is misleading.

Read the article

VPC SSH port forward into private subnet

- by CP510

Ok, so I've been racking my brain for DAYS on this dilema. I have a VPC setup with a public subnet, and a private subnet. The NAT is in place of course. I can connect from SSH into a instance in the public subnet, as well as the NAT. I can even ssh connect to the private instance from the public instance. I changed the SSHD configuration on the private instance to accept both port 22 and an arbitrary port number 1300. That works fine. But I need to set it up so that I can connect to the private instance directly using the 1300 port number, ie. ssh -i keyfile.pem [email protected] -p 1300 and 1.2.3.4 should route it to the internal server 10.10.10.10. Now I heard iptables is the job for this, so I went ahead and researched and played around with some routing with that. These are the rules I have setup on the public instance (not the NAT). I didn't want to use the NAT for this since AWS apperantly pre-configures the NAT instances when you set them up and I heard using iptables can mess that up. *filter :INPUT ACCEPT [129:12186] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [84:10472] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m state --state NEW -m tcp --dport 1300 -j ACCEPT -A INPUT -d 10.10.10.10/32 -p tcp -m limit --limit 5/min -j LOG --log-prefix "SSH Dropped: " -A FORWARD -d 10.10.10.10/32 -p tcp -m tcp --dport 1300 -j ACCEPT -A OUTPUT -o lo -j ACCEPT COMMIT # Completed on Wed Apr 17 04:19:29 2013 # Generated by iptables-save v1.4.12 on Wed Apr 17 04:19:29 2013 *nat :PREROUTING ACCEPT [2:104] :INPUT ACCEPT [2:104] :OUTPUT ACCEPT [6:681] :POSTROUTING ACCEPT [7:745] -A PREROUTING -i eth0 -p tcp -m tcp --dport 1300 -j DNAT --to-destination 10.10.10.10:1300 -A POSTROUTING -p tcp -m tcp --dport 1300 -j MASQUERADE COMMIT So when I try this from home. It just times out. No connection refused messages or anything. And I can't seem to find any log messages about dropped packets. My security groups and ACL settings allow communications on these ports in both directions in both subnets and on the NAT. I'm at a loss. What am I doing wrong?

Read the article

Remote access to internal machine (ssh port-forwarding)

- by MacUsers

I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

Read the article

What else can I do to secure my Linux server?

- by eric01

I want to put a web application on my Linux server: I will first explain to you what the web app will do and then I will tell you what I did so far to secure my brand new Linux system. The app will be a classified ads website (like gumtree.co.uk) where users can sell their items, upload images, send to and receive emails from the admin. It will use SSL for some pages. I will need SSH. So far, what I did to secure my stock Ubuntu (latest version) is the following: NOTE: I probably did some things that will prevent the application from doing all its tasks, so please let me know of that. My machine's sole purpose will be hosting the website. (I put numbers as bullet points so you can refer to them more easily) 1) Firewall I installed Uncomplicated Firewall. Deny IN & OUT by default Rules: Allow IN & OUT: HTTP, IMAP, POP3, SMTP, SSH, UDP port 53 (DNS), UDP port 123 (SNTP), SSL, port 443 (the ones I didn't allow were FTP, NFS, Samba, VNC, CUPS) When I install MySQL & Apache, I will open up Port 3306 IN & OUT. 2) Secure the partition in /etc/fstab, I added the following line at the end: tmpfs /dev/shm tmpfs defaults,rw 0 0 Then in console: mount -o remount /dev/shm 3) Secure the kernel In the file /etc/sysctl.conf, there are a few different filters to uncomment. I didn't know which one was relevant to web app hosting. Which one should I activate? They are the following: A) Turn on Source Address Verification in all interfaces to prevent spoofing attacks B) Uncomment the next line to enable packet forwarding for IPv4 C) Uncomment the next line to enable packet forwarding for IPv6 D) Do no accept ICMP redirects (we are not a router) E) Accept ICMP redirects only for gateways listed in our default gateway list F) Do not send ICMP redirects G) Do not accept IP source route packets (we are not a router) H) Log Martian Packets 4) Configure the passwd file Replace "sh" by "false" for all accounts except user account and root. I also did it for the account called sshd. I am not sure whether it will prevent SSH connection (which I want to use) or if it's something else. 5) Configure the shadow file In the console: passwd -l to lock all accounts except user account. 6) Install rkhunter and chkrootkit 7) Install Bum Disabled those services: "High performance mail server", "unreadable (kerneloops)","unreadable (speech-dispatcher)","Restores DNS" (should this one stay on?) 8) Install Apparmor_profiles 9) Install clamav & freshclam (antivirus and update) What did I do wrong and what should I do more to secure this Linux machine? Thanks a lot in advance

Read the article

Nginx reverse proxy with separate aliases

- by gabeDel

Interesting question I have this python code: import sys, bottle, gevent from bottle import * from gevent import * from gevent.wsgi import WSGIServer @route("/") def index(): yield "/" application=bottle.default_app() WSGIServer(('', port), application, spawn=None).serve_forever() that runs standalone with nignx infront of it as a reverse proxy. Now each of these pieces of code run separately but I run multiple of these per domain per project(directory) but the code thinks for some reason that it is top level and its not so when you go to mydomain.com/something it works but if you go to mydomain.com/something/ you will get an error. No I have tested and figured out that nginx is stripping the "something" from the request/query so that when you go to mydomain.com/something/ the code thinks you are going to mydomain.com// how do I get nginx to stop removing this information? Nginx site code: upstream mydomain { server 127.0.0.1:10100 max_fails=5 fail_timeout=10s; } upstream subdirectory { server 127.0.0.1:10199 max_fails=5 fail_timeout=10s; } server { listen 80; server_name mydomain.com; access_log /var/log/nginx/access.log; location /sub { proxy_pass http://subdirectory/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } location /subdir { proxy_pass http://subdirectory/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } }

Read the article

Need help troubleshooting highly variable ping times

- by Elliot.Bradshaw

I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

Read the article

[CentOS 4.8] nslookup resolves domains to IPs, but I can't get a response to pings to external servers

- by Beco

I have a fresh install of CentOS 4.8 running on an internal development server. I haven't done anything to it besides setting up sudoers and SSH. I can SSH into the server and from there resolve domains to IPs and ping internal servers, but for some reason I don't get any response from pinging external servers. The software firewall is disabled, and the problem is present with both static and DHCP-assigned network configurations. The network domain controller is a Windows Server 2003 box. $ nslookup google.com Server: 10.254.2.5 Address: 10.254.2.5#53 Non-authoritative answer: Name: google.com Address: 74.125.47.147 Name: google.com Address: 74.125.47.99 <etc...> 10.254.2.5 is the Win2K3 server. $ ping google.com PING google.com (74.125.47.106) 56(84) bytes of data. It just hangs here indefinitely. $ cat /etc/resolv.conf ; generated by /sbin/dhclient-script search <...snip...>.local nameserver 10.254.2.5 nameserver 10.254.2.124 10.254.2.124 is the backup DC server, which is currently off and tombstoned by this point. The snipped section is our company name. # ifconfig eth0 Link encap:Ethernet HWaddr <snip> inet addr:10.254.2.101 Bcast:10.254.2.255 Mask:255.255.255.0 inet6 addr: <snip>/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80066 errors:0 dropped:0 overruns:0 frame:0 TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7810133 (7.4 MiB) TX bytes:590550 (576.7 KiB) Interrupt:225 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8104 (7.9 KiB) TX bytes:8104 (7.9 KiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.254.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.254.2.5 0.0.0.0 UG 0 0 0 eth0 And, for good measure, a snapshot of the current ethernet config via the system-config-network GUI. Edit: I don't yet have enough rep to post images, so here's a link. Sorry! system-config-network snapshot I'm pretty green when it comes to setting up *nix dev servers and network configuration in general, so please let me know if I've left out critical information, or posted information I shouldn't have posted. Thanks!

Read the article

No external network on ubuntu 9.10, though dns works..

- by user29368

Hi, I have a weird problem I cant solve. I have several computers, two with xubuntu 9.10 One of them, acting as a media server, has stopped to work when it comes to external network.. I can do for example: ping google.com Which gives me an ip adress back, like: name@Media:/etc$ ping google.com PING google.com (66.102.9.147) 56(84) bytes of data. That tells me it reaches the dns?, but I get no response at all... If I ping a local computer all works fine. I can also reach the computer via ssh without any problems. I have always used network manager, but now I uninstalled it and made the settings manually like this: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.52 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Still no luck. I have no specific settings for this one in my router, and all the other computers, including my win laptop works fine. This is very annoying since I cant even do an update or anything.. ifconfig looks like this: eth0 Link encap:Ethernet HWaddr 00:24:1d:9f:10:89 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::224:1dff:fe9f:1089/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15410 errors:0 dropped:0 overruns:0 frame:0 TX packets:2693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1167398 (1.1 MB) TX bytes:694973 (694.9 KB) Interrupt:27 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2150 errors:0 dropped:0 overruns:0 frame:0 TX packets:2150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:143456 (143.4 KB) TX bytes:143456 (143.4 KB) route -n like this Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 I do not know where the adress starting with 169.254 comes from.. Could that be a part of the problem? Hoping for some assistance since Im totally stuck here.. /george

Read the article

SQL SERVER – Introduction to Extended Events – Finding Long Running Queries

- by pinaldave

The job of an SQL Consultant is very interesting as always. The month before, I was busy doing query optimization and performance tuning projects for our clients, and this month, I am busy delivering my performance in Microsoft SQL Server 2005/2008 Query Optimization and & Performance Tuning Course. I recently read white paper about Extended Event by SQL Server MVP Jonathan Kehayias. You can read the white paper here: Using SQL Server 2008 Extended Events. I also read another appealing chapter by Jonathan in the book, SQLAuthority Book Review – Professional SQL Server 2008 Internals and Troubleshooting. After reading these excellent notes by Jonathan, I decided to upgrade my course and include Extended Event as one of the modules. This week, I have delivered Extended Events session two times and attendees really liked the said course. They really think Extended Events is one of the most powerful tools available. Extended Events can do many things. I suggest that you read the white paper I mentioned to learn more about this tool. Instead of writing a long theory, I am going to write a very quick script for Extended Events. This event session captures all the longest running queries ever since the event session was started. One of the many advantages of the Extended Events is that it can be configured very easily and it is a robust method to collect necessary information in terms of troubleshooting. There are many targets where you can store the information, which include XML file target, which I really like. In the following Events, we are writing the details of the event at two locations: 1) Ringer Buffer; and 2) XML file. It is not necessary to write at both places, either of the two will do. -- Extended Event for finding *long running query* IF EXISTS(SELECT * FROM sys.server_event_sessions WHERE name='LongRunningQuery') DROP EVENT SESSION LongRunningQuery ON SERVER GO -- Create Event CREATE EVENT SESSION LongRunningQuery ON SERVER -- Add event to capture event ADD EVENT sqlserver.sql_statement_completed ( -- Add action - event property ACTION (sqlserver.sql_text, sqlserver.tsql_stack) -- Predicate - time 1000 milisecond WHERE sqlserver.sql_statement_completed.duration > 1000 ) -- Add target for capturing the data - XML File ADD TARGET package0.asynchronous_file_target( SET filename='c:\LongRunningQuery.xet', metadatafile='c:\LongRunningQuery.xem'), -- Add target for capturing the data - Ring Bugger ADD TARGET package0.ring_buffer (SET max_memory = 4096) WITH (max_dispatch_latency = 1 seconds) GO -- Enable Event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=START GO -- Run long query (longer than 1000 ms) SELECT * FROM AdventureWorks.Sales.SalesOrderDetail ORDER BY UnitPriceDiscount DESC GO -- Stop the event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=STOP GO -- Read the data from Ring Buffer SELECT CAST(dt.target_data AS XML) AS xmlLockData FROM sys.dm_xe_session_targets dt JOIN sys.dm_xe_sessions ds ON ds.Address = dt.event_session_address JOIN sys.server_event_sessions ss ON ds.Name = ss.Name WHERE dt.target_name = 'ring_buffer' AND ds.Name = 'LongRunningQuery' GO -- Read the data from XML File SELECT event_data_XML.value('(event/data[1])[1]','VARCHAR(100)') AS Database_ID, event_data_XML.value('(event/data[2])[1]','INT') AS OBJECT_ID, event_data_XML.value('(event/data[3])[1]','INT') AS object_type, event_data_XML.value('(event/data[4])[1]','INT') AS cpu, event_data_XML.value('(event/data[5])[1]','INT') AS duration, event_data_XML.value('(event/data[6])[1]','INT') AS reads, event_data_XML.value('(event/data[7])[1]','INT') AS writes, event_data_XML.value('(event/action[1])[1]','VARCHAR(512)') AS sql_text, event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS tsql_stack, CAST(event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS XML).value('(frame/@handle)[1]','VARCHAR(50)') AS handle FROM ( SELECT CAST(event_data AS XML) event_data_XML, * FROM sys.fn_xe_file_target_read_file ('c:\LongRunningQuery*.xet', 'c:\LongRunningQuery*.xem', NULL, NULL)) T GO -- Clean up. Drop the event DROP EVENT SESSION LongRunningQuery ON SERVER GO Just run the above query, afterwards you will find following result set. This result set contains the query that was running over 1000 ms. In our example, I used the XML file, and it does not reset when SQL services or computers restarts (if you are using DMV, it will reset when SQL services restarts). This event session can be very helpful for troubleshooting. Let me know if you want me to write more about Extended Events. I am totally fascinated with this feature, so I’m planning to acquire more knowledge about it so I can determine its other usages. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology Tagged: SQL Extended Events

Read the article

JavaOne Latin America 2012 is a wrap!

- by arungupta

Third JavaOne in Latin America (2010, 2011) is now a wrap! Like last year, the event started with a Geek Bike Ride. I could not attend the bike ride because of pre-planned activities but heard lots of good comments about it afterwards. This is a great way to engage with JavaOne attendees in an informal setting. I highly recommend you joining next time! JavaOne Blog provides a a great coverage for the opening keynotes. I talked about all the great set of functionality that is coming in the Java EE 7 Platform. Also shared the details on how Java EE 7 JSRs are willing to take help from the Adopt-a-JSR program. glassfish.org/adoptajsr bridges the gap between JUGs willing to participate and looking for areas on where to help. The different specification leads have identified areas on where they are looking for feedback. So if you are JUG is interested in picking a JSR, I recommend to take a look at glassfish.org/adoptajsr and jump on the bandwagon. The main attraction for the Tuesday evening was the GlassFish Party. The party was packed with Latin American JUG leaders, execs from Oracle, and local community members. Free flowing food and beer/caipirinhas acted as great lubricant for great conversations. Some of them were considering the migration from Spring -> Java EE 6 and replacing their primary app server with GlassFish. Locaweb, a local hosting provider sponsored a round of beer at the party as well. They are planning to come with Java EE hosting next year and GlassFish would be a logical choice for them ;) I heard lots of positive feedback about the party afterwards. Many thanks to Bruno Borges for organizing a great party! Check out some more fun pictures of the party! Next day, I gave a presentation on "The Java EE 7 Platform: Productivity and HTML 5" and the slides are now available: With so much new content coming in the plaform: Java Caching API (JSR 107) Concurrency Utilities for Java EE (JSR 236) Batch Applications for the Java Platform (JSR 352) Java API for JSON (JSR 353) Java API for WebSocket (JSR 356) And JAX-RS 2.0 (JSR 339) and JMS 2.0 (JSR 343) getting major updates, there is definitely lot of excitement that was evident amongst the attendees. The talk was delivered in the biggest hall and had about 200 attendees. Also spent a lot of time talking to folks at the OTN Lounge. The JUG leaders appreciation dinner in the evening had its usual share of fun. Day 3 started with a session on "Building HTML5 WebSocket Apps in Java". The slides are now available: The room was packed with about 150 attendees and there was good interaction in the room as well. A collaborative whiteboard built using WebSocket was very well received. The following tweets made it more worthwhile: A WebSocket speek, by @ArunGupta, was worth every hour lost in transit. #JavaOneBrasil2012, #JavaOneBr @arungupta awesome presentation about WebSockets :) The session was immediately followed by the hands-on lab "Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket". The lab covers JAX-RS 2.0, Jersey-specific features such as Server-Sent Events, and a WebSocket endpoint using JSR 356. The complete self-paced lab guide can be downloaded from here. The lab was planned for 2 hours but several folks finished the entire exercise in about 75 mins. The wonderfully written lab material and an added incentive of Java EE 6 Pocket Guide did the trick ;-) I also spoke at "The Java Community Process: How You Can Make a Positive Difference". It was really great to see several JUG leaders talking about Adopt-a-JSR program and other activities that attendees can do to participate in the JCP. I shared details about Adopt a Java EE 7 JSR as well. The community keynote in the evening was looking fun but I had to leave in between to go through the peak Sao Paulo traffic time :) Enjoy the complete set of pictures in the album:

Read the article

SQLAuthority News – Tips for Traveling to Nepal

- by pinaldave

If you are a regular reader of this blog, you might know that I travel nearly 20+ days out of 30 days in a month. There are cases when I don’t have a chance to go home for an entire month and my family has to travel to different cities just to meet me. During my recent visit, one of my acquaintances suggested that I should blog about my travel experiences as well. This can be helpful to others who are traveling to the country or city. I have previously written about my experience about all the airlines in India. I would be writing about a few tips about traveling to the beautiful country Nepal today. Kathmandu, the capital of Nepal is very scenic. There are lots of historical places to see and visit. I was fortunate enough to stopover the Pashupatinath Temple, Bhaktapur, Vasantpur and the temple of Kumari Goddess. I also visited casinos there, but even if I have stayed in Las Vegas for 3 and a half years before, I was not keen on them so I left the casinos just like what I did in Las Vegas . I also traveled to the famous Thamel area by car. Here are my quick tips for anyone who is planning to visit Nepal. They are not categorized but just written in the order that came to my mind. Please note that if you are an Indian, you will get a special privilege everywhere in Nepal, beginning right from the Indian airports. Use the expression “Nameste!” If you want to greet any Indian or Nepali. Indian Nationals do not need visa/passport to enter Nepal. In fact, Indian Nationals can just walk in to Nepal without any passport; but should have any valid Indian ID. There is no use of a passport since it will not be stamped at any immigration ports, whether in India or Nepal. Indian currency is widely accepted everywhere. However, please bring only Rs. 100 bills/notes as Rs. 500 or Rs. 1000 are not accepted. However, casinos there will accept larger bills. Indian National Language – Hindi is widely spoken and understood everywhere. I did not find a single person who had trouble speaking it. Nepali language uses the scripting language as Devnagari, which is similar to Hindi. Here, you will find food of almost every country. The taste of Nepali food is authentic and very delicious. It is very safe to travel and move around in Kathmandu (despite what media suggests). However, it will really help if you have a friend who speaks Nepali. You can negotiate a few deals and cut off to almost 1/5 of the original quoted price of products sold here. If you are from Gujarat, India – you will find Nepali language sharing many common words. Temples are everywhere, so do not miss to visit a few of them. Pashupatinath is a must. Only followers of Hindu religion (from Nepal and India only) are allowed in most of the holy places. Camera is allowed everywhere except on the holy places. Now it is your turn to share your opinions or any suggestions. I think Nepal is a great country as there are lots of places to visit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

Read the article

Oracle Internet Directory 11gR1 11.1.1.6 Certified with E-Business Suite

- by Elke Phelps (Oracle Development)

Oracle E-Business Suite comes with native user authentication and management capabilities out-of-the-box. If you need more-advanced features, it's also possible to integrate it with Oracle Internet Directory and Oracle Single Sign-On or Oracle Access Manager, which allows you to link the E-Business Suite with third-party tools like Microsoft Active Directory, Windows Kerberos, and CA Netegrity SiteMinder. For details about third-party integration architectures, see either of these article for EBS 11i and 12: In-Depth: Using Third-Party Identity Managers with E-Business Suite Release 12 In-Depth: Using Third-Party Identity Managers with the E-Business Suite Release 11i Oracle Internet Directory 11.1.1.6 is now certified with Oracle E-Business Suite Release 11i, 12.0 and 12.1. OID 11.1.1.6 is part of Oracle Fusion Middleware 11g Release 1 Version 11.1.1.6.0, also known as FMW 11g Patchset 5. Certified E-Business Suite releases are: EBS Release 11i 11.5.10.2 + ATG PH.H RUP 7 and higher EBS Release 12.0.6 and higher EBS Release 12.1.1 and higher Supported Configurations Oracle Internet Directory 11.1.1.5.0 can be integrated with two single sign-on solutions for EBS environments: Oracle Internet Directory and Directory Integration Platform from Fusion Middleware 11gR1 Patchset 5 (11.1.1.6.0) with Oracle Access Manager 10g (10.1.4.3) with an existing Oracle E-Business Suite system (Release 11i or 12.1.x). Oracle Internet Directory and Directory Integration Platform from Fusion Middleware 11gR1 Patchset 5 (11.1.1.6.0) with Oracle Access Manager 11gR1 (11.1.1.5) with an existing Oracle E-Business Suite system (Release 12.0.6 or higher or 12.1.x). Oracle Internet Directory (OID) and Directory Integration Platform (DIP) from Oracle Fusion Middleware 11gR1 Patchset 5 (11.1.1.6.0) with Oracle Single Sign-On Server and Oracle Delegated Administration Services Release 10g (10.1.4.3.0) with an existing Oracle E-Business Suite system (Release 11i, 12.0.6 or 12.1.x) Oracle Access Manager strongly recommended Oracle has two single sign-on solutions: Oracle Single Sign-On Server (OSSO) and Oracle Access Manager (OAM). Oracle strongly recommends that all new single sign-on implementations use Oracle Access Manager. Oracle Access Manager is the preferred solution going forward, and forms the basis of Oracle Fusion Middleware 11g. OSSO is no longer being actively developed and will not be ported to Oracle WebLogic Server. Platform certifications Oracle Internet Directory is certified to run on any operating system for which Oracle WebLogic Server 11g is certified. Refer to the Oracle Fusion Middleware 11g System Requirements for more details.For information on operating systems supported by Oracle Internet Directory and its components, refer to the Oracle Identity and Access Management 11gR1 certification matrix.Integration with Oracle Internet Directory involves components spanning several different suites of Oracle products. There are no restrictions on which platform any particular component may be installed so long as the platform is supported for that component.References Overview of Single Sign-On Integration Options for Oracle E-Business Suite Note 1388152.1 Using the Latest Oracle Internet Directory 11gR1 Patchset with Oracle Single Sign-on and Oracle E-Business Suite (Note 876539.1) Integrating Oracle E-Business Suite with Oracle Access Manager 11g using Oracle E-Business Suite AccessGate (Note 1309013.1) Integrating Oracle E-Business Suite with Oracle Access Manager 10g using Oracle E-Business Suite AccessGate (Note 975182.1) Migrating Oracle Single Sign-On 10gR3 to Oracle Access Manager 11g with Oracle E-Business Suite (Note 1304550.1) Oracle Fusion Middleware Download, Installation & Configuration Readme Oracle Fusion Middleware Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1) (Part Number E12002-09) Oracle Fusion Middleware Upgrade Guide for Oracle Identity Management 11g Release 1 (11.1.1) (Part Number E10129-09) Oracle Fusion Middleware Upgrade Planning Guide 11g Release 1 (11.1.1) (Part Number E10125-06) Oracle Fusion Middleware Patching Guide 11g Release 1 (11.1.1) (Part Number E16793-12) Related Articles Understanding Options for Integrating Oracle Access Manager with E-Business Suite In-Depth: Using Third-Party Identity Managers with E-Business Suite Release 12 In-Depth: Using Third-Party Identity Managers with the E-Business Suite Release 11i Oracle Access Manager 10gR3 Certified with E-Business Suite Portal 11.1.1.4 Certified with E-Business Suite Discoverer 11.1.1.4 Certified with E-Business Suite

Read the article

Handy ASP.NET MVC 2 Extension Methods – Where am I?

- by Bobby Diaz

Have you ever needed to detect what part of the application is currently being viewed? This might be a bigger issue if you write a lot of shared/partial views or custom display or editor templates. Another scenario, which is the one I encountered when I first started down this path, is when you have some type of menu and you’d like to be able to determine which item represents the current page so you can highlight it in some way. A simple example is the menu that is created as part of the default ASP.NET MVC 2 Application template. <div id="menucontainer"> <ul id="menu"> <li><%= Html.ActionLink("Home", "Index", "Home") %></li> <li><%= Html.ActionLink("About", "About", "Home") %></li> </ul> </div> The part that got me at first, however, was the following entry in the default style sheet (Site.css): ul#menu li.selected a { background-color: #fff; color: #000; } I assumed that the .selected class would automatically get applied to the active menu item. After trying a few different things, including the MvcContrib MenuBuilder, I decided to write my own extension methods so I would have more control over the output. First, I needed a way to determine what view the user has navigated to based on the requested URL and route configuration. Now, I am sure there are many ways to do this, but this is what I came up with: public static class RequestExtensions { public static bool IsCurrentRoute(this RequestContext context, String areaName, String controllerName, params String[] actionNames) { var routeData = context.RouteData; var routeArea = routeData.DataTokens["area"] as String; var current = false; if ( ((String.IsNullOrEmpty(routeArea) && String.IsNullOrEmpty(areaName)) || (routeArea == areaName)) && ((String.IsNullOrEmpty(controllerName)) || (routeData.GetRequiredString("controller") == controllerName)) && ((actionNames == null) || actionNames.Contains(routeData.GetRequiredString("action"))) ) { current = true; } return current; } // additional overloads omitted... } With that in place, I was able to write several UrlHelper methods that check if the supplied values map to the current view. public static class UrlExtensions { public static bool IsCurrent(this UrlHelper urlHelper, String areaName, String controllerName, params String[] actionNames) { return urlHelper.RequestContext.IsCurrentRoute(areaName, controllerName, actionNames); } public static string Selected(this UrlHelper urlHelper, String areaName, String controllerName, params String[] actionNames) { return urlHelper.IsCurrent(areaName, controllerName, actionNames) ? "selected" : String.Empty; } // additional overloads omitted... } Now I can re-work the original menu to utilize these new methods. Note: be sure to import the proper namespace so the extension methods become available inside your views! <div id="menucontainer"> <ul id="menu"> <li class="<%= Url.Selected(null, "Home", "Index") %>"> <%= Html.ActionLink("Home", "Index", "Home")%></li> <li class="<%= Url.Selected(null, "Home", "About") %>"> <%= Html.ActionLink("About", "About", "Home")%></li> </ul> </div> If we take it one step further, we can clean up the markup even more. Check out the Html.ActionMenuItem() extension method and the refined menu: public static class HtmlExtensions { public static MvcHtmlString ActionMenuItem(this HtmlHelper htmlHelper, String linkText, String actionName, String controllerName) { var html = new StringBuilder("<li"); if ( htmlHelper.ViewContext.RequestContext .IsCurrentRoute(null, controllerName, actionName) ) { html.Append(" class=\"selected\""); } html.Append(">") .Append(htmlHelper.ActionLink(linkText, actionName, controllerName)) .Append("</li>"); return MvcHtmlString.Create(html.ToString()); } // additional overloads omitted... } <div id="menucontainer"> <ul id="menu"> <%= Html.ActionMenuItem("Home", "Index", "Home") %> <%= Html.ActionMenuItem("About", "About", "Home") %> </ul> </div> Which generates the following HTML: <div id="menucontainer"> <ul id="menu"> <li class="selected"><a href="/">Home</a></li> <li><a href="/Home/About">About</a></li> </ul> </div> I have created a codepaste of these extension methods if you are interested in using them in your own projects. Enjoy!

Read the article

Editing Routes in ASP.NET MVC

- by imran_ku07

Introduction : Phil Haack's had written two great articles about Editable Routes, Editable Routes or Editable Routes Using App_Code.These Article are great. But if you not need to unit test your Routes and don't care about restart Application Domian during editing your Routes then global.asax file is the fastest and easiest to achieve the same. In this Article I will use Global.asax file instead of Global.asax.cs file for defining Routes and you will also see how this whole process will works. Description : You just need to Cut (or Copy) the code inside Global.asax.cs and paste it in Global.asax inside runat server tag. You can simply do this by cutting the code of Global.asax.cs, and paste it inside Global.asax, Easy and quick ,Now you can change Global.asax without compiling the application. How this works : I think it is worth here to see what is happening here. Actually, ASP.NET will use Global.asax file to create a class named global_asax within ASP namespace and place all the code in Global.asax inside the class global_asax class which is created at runtime, namespace ASP { public class global_asax: NerdDinner.MvcApplication { //Any definitions defined in Global.asax like Application_Start method } } Which inherits from class defined in Application tag, <%@ Application Codebehind="Global.asax.cs" Inherits="NerdDinner.MvcApplication" Language="C#" %> Actually ASP.NET creates a pool of application objects of this class, which varies from 1 to 100. Every request take one of these application objects to a serve incoming requests. After receiving an application object then it will call application specific events, like Application_Start(for only firstRequest), Application_BeginRequest(for every request), and so on. Therefore if these methods are defined in global_asax class then ASP.NET will call these method from global_asax, if not then it will use base class methods may be defined in Global.asax.cs(the concept known as shadowing or hiding). Summary : In this article, I showed how easily and quickly you can make your Routes Editable. But also note that any change in global.asax results in Application Domain restart and this technique also makes your Route Unit Test difficult.

Read the article

Markus Zirn, "Big Data with CEP and SOA" @ SOA, Cloud & Service Technology Symposium 2012

- by JuergenKress

ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 Early-Bird Registration is Now Open with Special Pricing! Register before July 1, 2012 to qualify for discounts. Visit the Registration page for details. The International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Big Data with CEP and SOA - September 25, 2012 - 14:15 Speaker: Markus Zirn, Oracle and Baz Kuthi, Avocent The "Big Data" trend is driving new kinds of IT projects that process machine-generated data. Such projects store and mine using Hadoop/ Map Reduce, but they also analyze streaming data via event-driven patterns, which can be called "Fast Data" complementary to "Big Data". This session highlights how "Big Data" and "Fast Data" design patterns can be combined with SOA design principles into modern, event-driven architectures. We will describe specific architectures that combines CEP, Distributed Caching, Event-driven Network, SOA Composites, Application Development Framework, as well as Hadoop. Architecture patterns include pre-processing and filtering event streams as close as possible to the event source, in memory master data for event pattern matching, event-driven user interfaces as well as distributed event processing. Focus is on how "Fast Data" requirements are elegantly integrated into a traditional SOA architecture. Markus Zirn is Vice President of Product Management covering Oracle SOA Suite, SOA Governance, Application Integration Architecture, BPM, BPM Solutions, Complex Event Processing and UPK, an end user learning solution. He is the author of “The BPEL Cookbook” (rated best book on Services Oriented Architecture in 2007) as well as “Fusion Middleware Patterns”. Previously, he was a management consultant with Booz Allen & Hamilton’s High Tech practice in Duesseldorf as well as San Francisco and Vice President of Product Marketing at QUIQ. Mr. Zirn holds a Masters of Electrical Engineering from the University of Karlsruhe and is an alumnus of the Tripartite program, a joint European degree from the University of Karlsruhe, Germany, the University of Southampton, UK, and ESIEE, France. KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Markus Zirn,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

Read the article

To ORM or Not to ORM. That is the question…

- by Patrick Liekhus

UPDATE: Thanks for the feedback and comments. I have adjusted my table below with your recommendations. I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping. According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care? Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this? Let me outline it in the following points: Development speed. No more need to map repetitive tasks query results to object members. Once the map is created the code is rendered for you. Persistence portability. The ORM knows how to map SQL specific syntax for the persistence engine you choose. It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified. The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help? Well, let’s compare some of the ORM tools that I have used and/or researched. I have been interested in ORM for some time now. My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations. However, you have to take business considerations into account and the law of diminishing returns. Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO). The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO. With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps. While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking. DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it. This sounds worse than it really is. What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with. Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable. And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - - Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes I have a very small team and limited resources with a lot of responsibilities. In order to keep up with our customers, we must rely on tools like these. We use the EDMX tool so that we can create a visual representation of the applications with our customers. Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly. This keeps us from requiring as many junior level developers on our team. I have also worked on multiple teams where they believed in writing their own “framework”. In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework. Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements. With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance. Again, my recommendation would be to use an available framework and get to working on your business domain problems. If your coding is not making money for you, why are you working on it? Do you really need to be writing query to object member code again and again? Thanks

Read the article

Ann Arbor Day of .NET 2010 Recap

- by PSteele

Had a great time at the Ann Arbor Day of .NET on Saturday. Lots of great speakers and topics. And chance to meet up with friends you usually only communicate with via email/twitter. My Presentation I presented "Getting up to speed with C# 3.5 — Just in time for 4.0!". There's still a lot of devs that are either stuck in .NET 2.0 or just now moving to .NET 3.5. This presentation gave highlights of a lot of the key features of 3.5. I had great questions from the audience. Afterwards, I talked with a few people who are just now getting in to 3.5 and they told me they had a lot of "A HA!" moments when something I said finally clicked and made sense from a code sample they had seen on the web. Thanks to all who attended! A few people have asked me for the slides and demo. The slides were nothing more than a table of contents. 90% of the presentation was spent inside Visual Studio demo'ing new techniques. However, I have included it in the ZIP file with the sample solution. You can download it here. Dennis Burton on MongoDB I caught Dennis Burton's presentation on MongoDB. I was really interested in this one as I've missed the last few times Dennis had given it to local user groups. It was very informative and I want to spend some time learning more about MongoDB. I'm still an old-school relational guy, but I'm willing to investigate alternatives. Brian Genisio on Prism Since I'm not a Silverlight/WPF guy (yet), I wasn't sure this would interest me. But I talked with Brian for a couple of minutes before the presentation and he convinced me to catch it. And I'm glad he did. Prism looks like a very nice framework for "composable UI's" in Silverlight and WPF. I like the whole "dependency injection" feel to it. Nice job Brian! GiveCamp Planning I spent some time Saturday working on things for the upcoming GiveCamp (which is why I only caught a few sessions). Ann Arbor's Day of .NET and GiveCamp have both been held at Washtenaw Community College so I took some time (along with fellow GiveCamp planners Mike Eaton and John Hopkins) to check out the new location for Ann Arbor GiveCamp this year! In the past, WCC has let us use the Business Education (BE) building for our GiveCamp's. But this year, they're moving us over to the Morris Lawrence (ML) building. Let me tell you – this is a step UP! In the BE building, we were spread across two floors and spread out into classrooms. Plus, our opening and closing ceremonies were held in the Liberal Arts (LA) building – a bit of a walk from the BE building. In the ML building, we're together for the whole weekend. We've got a large open area (which can be sectioned off if needed) for everyone to work in: Right next to that, we have a large area where we can set up tables and eat. And it helps that we have a wonderful view while eating (yes, that's a lake out there with a fountain): The ML building also has showers (which we'll have access to!) and it's own auditorium for our opening and closing ceremonies. All in all, this year's GiveCamp will be great! Stay tuned to the Ann Arbor GiveCamp website. We'll be looking for volunteers (devs, designers, PM's, etc…) soon! Technorati Tags: .NET,Day of .NET,GiveCamp,MongoDB,Prism

Read the article

My Mother Bought a Droid

- by Ben Griswold

I converted to iPhone two years ago when I left my former employer and my Blackberry behind. The truth is I half-heartedly purchased my iPhone. It was a great looking device, but as far as I was concerned, it was a mere toy compared to my Blackberry. I remember hiding the toy in my briefcase when attending business meetings because I didn’t consider it to be professional enough. I’ve since owned all three generations of the iPhone and, well, iPhone seems to have caught on. I still miss the click of the Blackberry keyboard and the blinking red light letting me know that someone/something requires my attention, but I’m officially an iPhone fanboy now. My mom called last weekend and asked if she should buy an iPhone. I talked her ear off about everything I love about iPhone. I went on for about twenty minutes. I couldn’t help myself. I mentioned everything from my podcast subscriptions to the application which manages my workouts. I went as far as to say that someday all smart phones will be referred to as iPhones just like all tissues are referred to as Kleenex and all sodas are referred to as Cokes. I was really on a roll and then I stopped. I had to…the call dropped. There I was, strategically standing in the far corner of my backyard where I get the most reliable AT&T reception and the call drops in middle of my iPhone pitch. Folks, I don’t care how good a salesperson you are, it’s tough to recover from a situation like this. I dialed my mom back and jokingly asked if she was planning to make calls with her new phone. I explained that AT&T is bound to provide better service eventually but I’m not sure she should wait. After all, I have troubles with the network in San Diego and I can only image how bad it would be for her in Western Massachusetts. Mom called back a few days later exclaiming, “I bought a Droid! I love this phone! I haven’t done anything with it but make phone calls, but I love it.” I had to laugh. My mom made the right call (pun intended.) The iPhone is an amazing device, but owners are constantly reminded that its core function (it’s a phone, remember?) is subpar. If you love gadgets, you’re probably enthralled by iPhone’s many bells and whistles and, relatively speaking, the terrible phone service might not amount to much. (Maybe it amounts to a rant on your blog.) The overall iPhone offering is so attractive that consumers are willing to wait for AT&T to straighten up their act or wait until Apple grants a choice of carriers. But I don’t see either of these remedies coming soon. In the interim, I’m willing to take my iPhone for what it is and just continue to enjoy my favorite features while pretending that poor coverage isn’t a big deal. With any luck, more and more reasonable folks will recognize that Android Phones are legitimate players in the smart phone space, they will buy loads of them and there will become plenty of functional phones to borrow when my “phone” is showing zero bars. Heck, I’m already covered when I visit my mom.

Read the article

Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

- by Maria Forney

Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care. The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI. Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center. The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support. Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets. A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.” Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20. Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours. As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. • “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!” - Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

Read the article

Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

- by Michelle Kimihira

By Maria Forney Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care. The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI. Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center. The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support. Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets. A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.” Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20. Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours. As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. • “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!” - Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

Read the article

SWFObject and IE6 causing hair-pulling agony

- by Piet

I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

Read the article

Value of SOA Specialization interview with Thomas Schaller IPT - part III

- by Jürgen Kress

Recognized by Oracle, Preferred by Customers. We had the great opportunity to interview Thomas Schaller – Partner from our SOA Specialized Partner IPT Innovation Process Technology from Switzerland Why did IPT decide to become SOA Specialized? " SOA Specialization is a great branding for IPT. We are the SOA Specialists in the Swiss market, as we focus all our services around SOA. With 65 Swiss consultants focused on SOA Security & SOA Testing & BPM – Business Process Management & BSM – Business Service Modeling the partnership with Oracle as the technology leader in SOA is key, therefore it was important to us to become the first SOA Specialized company in Switzerland. As a result IPT is mentioned by Gartner as one of eight European SOA Consulting Firms and included in „Guide to SOA Consulting and System Integration Service Providers“ Can you describe the marketing activities with Oracle? Once a year we organize the largest SOA Conference in Switzerland “SOA, BPM & Integration Forum 2011“ Oracle is much more than a sponsor for the conference. Jointly we invite our customer base to attend this key event. The sales teams address jointly their most important prospects and customers. Oracle supports us with key speakers who present future directions of the Oracle SOA portfolio like Clemens Utschig-Utschig who presented details about the Complex Event Processing (CEP) solution in 2009 and James Allerton-Austin who presented details about the social BPM solution (BPM) in 2010. Additional our key customers presented their Oracle SOA success stories. How did you team with Oracle around the sales activities? "Sales alignment is key for the successful partnership. When we achieved! SOA Specialization we celebrated jointly with the Oracle and IPT middleware sales team. At the Aperol may interesting discussions resulted in joint opportunities and business. A key section of our joint business planning are marketing and sales activities. Together we define campaign topics and target customers. Matthias Breitschmid our superb Oracle partner manager ensures that the defined sales teams align and start the joint business. Regular we review our joint business plan with the joint management teams and Jürgen Kress our EMEA Oracle Sponsor. It is great to see that both companies profit from each other and we receive leads from Oracle!” Did you get Oracle support to train your consultants in the Oracle SOA Suite? “Enablement is key for us to deliver successful SOA projects. Together with Ralph Bellinghausen from the Oracle Enablement team we defined an Oracle trainings plan for our consultants. The monthly SOA Partner Community newsletter is a great resource to get the latest product updates, webcasts and trainings. As a SOA Specialized partner we get also invited to the SOA Blackbelt trainings, this trainings are hosted by Oracle product management where we get not only first hand information we get also direct access to the developers who can support us in critical project phases. Driven by the customer success we have increased our Oracle SOA practice by more than 200% in the last years!” Why did the customer decide for the IPT SOA offering? “SOA Specialization becomes a brand for customers, it proofs that we have the certified SOA skills and that IPT has delivered successful Oracle SOA projects. Jointly with Oracle and all the support we get from marketing, sales, enablement, support and product management we can ensure our customers to deliver their SOA project successful!” What are the next steps for IPT? “SOA Specialization is a super beneficial for IPT. We are looking forward to our upcoming SOA, BPM & Integration Forum 2011 and prepare to become BPM Specialized. part I Torsten Winterberg, Opitz Consulting & part II Debra Lilley, Fujitsu For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website

Read the article

The Top Ten Security Top Ten Lists

- by Troy Kitch

As a marketer, we're always putting together the top 3, or 5 best, or an assortment of top ten lists. So instead of going that route, I've put together my top ten security top ten lists. These are not only for security practitioners, but also for the average Joe/Jane; because who isn't concerned about security these days? Now, there might not be ten for each one of these lists, but the title works best that way. Starting with my number ten (in no particular order): 10. Top 10 Most Influential Security-Related Movies Amrit Williams pulls together a great collection of security-related movies. He asks for comments on which one made you want to get into the business. I would have to say that my most influential movie(s), that made me want to get into the business of "stopping the bad guys" would have to be the James Bond series. I grew up on James Bond movies: thwarting the bad guy and saving the world. I recall being both ecstatic and worried when Silicon Valley-themed "A View to A Kill" hit theaters: "An investigation of a horse-racing scam leads 007 to a mad industrialist who plans to create a worldwide microchip monopoly by destroying California's Silicon Valley." Yikes! 9. Top Ten Security Careers From movies that got you into the career, here’s a top 10 list of security-related careers. It starts with number then, Information Security Analyst and ends with number one, Malware Analyst. They point out the significant growth in security careers and indicate that "according to the Bureau of Labor Statistics, the field is expected to experience growth rates of 22% between 2010-2020. If you are interested in getting into the field, Oracle has many great opportunities all around the world. 8. Top 125 Network Security Tools A bit outside of the range of 10, the top 125 Network Security Tools is an important list because it includes a prioritized list of key security tools practitioners are using in the hacking community, regardless of whether they are vendor supplied or open source. The exhaustive list provides ratings, reviews, searching, and sorting. 7. Top 10 Security Practices I have to give a shout out to my alma mater, Cal Poly, SLO: Go Mustangs! They have compiled their list of top 10 practices for students and faculty to follow. Educational institutions are a common target of web based attacks and miscellaneous errors according to the 2014 Verizon Data Breach Investigations Report. 6. (ISC)2 Top 10 Safe and Secure Online Tips for Parents This list is arguably the most important list on my list. The tips were "gathered from (ISC)2 member volunteers who participate in the organization’s Safe and Secure Online program, a worldwide initiative that brings top cyber security experts into schools to teach children ages 11-14 how to protect themselves in a cyber-connected world…If you are a parent, educator or organization that would like the Safe and Secure Online presentation delivered at your local school, or would like more information about the program, please visit here.” 5. Top Ten Data Breaches of the Past 12 Months This type of list is always changing, so it's nice to have a current one here from Techrader.com. They've compiled and commented on the top breaches. It is likely that most readers here were effected in some way or another. 4. Top Ten Security Comic Books Although mostly physical security controls, I threw this one in for fun. My vote for #1 (not on the list) would be Professor X. The guy can breach confidentiality, integrity, and availability just by messing with your thoughts. 3. The IOUG Data Security Survey's Top 10+ Threats to Organizations The Independent Oracle Users Group annual survey on enterprise data security, Leaders Vs. Laggards, highlights what Oracle Database users deem as the top 12 threats to their organization. You can find a nice graph on page 9; Figure 7: Greatest Threats to Data Security. 2. The Ten Most Common Database Security Vulnerabilities Though I don't necessarily agree with all of the vulnerabilities in this order...I like a list that focuses on where two-thirds of your sensitive and regulated data resides (Source: IDC). 1. OWASP Top Ten Project The Online Web Application Security Project puts together their annual list of the 10 most critical web application security risks that organizations should be including in their overall security, business risk and compliance plans. In particular, SQL injection risks continues to rear its ugly head each year. Oracle Audit Vault and Database Firewall can help prevent SQL injection attacks and monitor database and system activity as a detective security control. Did I miss any?

Read the article

It’s A Team Sport: PASS Board Year 2, Q3

- by Denise McInerney

As I type this I’m on an airplane en route to my 12th PASS Summit. It’s been a very busy 3.5 months since my last post on my work as a Board member. Nearing the end of my 2-year term I am struck by how much has happened, and yet how fast the time has gone. But I’ll save the retrospective post for next time and today focus on what happened in Q3. In the last three months we made progress on several fronts, thanks to the contributions of many volunteers and HQ staff members. They deserve our appreciation for their dedication to delivering for the membership week after week. Virtual Chapters The Virtual Chapters continue to provide many PASS members with valuable free training. Between July and September of 2013 VCs hosted over 50 webinars with a total of 4300 attendees. This quarter also saw the launch of the Security & Global Russian VCs. Both are off to a strong start and I welcome these additions to the Virtual Chapter portfolio. At the beginning of 2012 we had 14 Virtual Chapters. Today we have 22. This growth has been exciting to see. It has also created a need to have more volunteers help manage the work of the VCs year-round. We have renewed focus on having Virtual Chapter Mentors work with the VC Leaders and other volunteers. I am grateful to volunteers Julie Koesmarno, Thomas LeBlanc and Marcus Bittencourt who join original VC Mentor Steve Simon on this team. Thank you for stepping up to help. Many improvements to the VC web sites have been rolling out over the past few weeks. Our marketing and IT teams have been busy working a new look-and-feel, features and a logo for each VC. They have given the VCs a fresh, professional look consistent with the rest of the PASS branding, and all VCs now have a logo that connects to PASS and the particular focus of the chapter. 24 Hours of PASS The Summit Preview edition of 24HOP was held on July 31 and by all accounts was a success. Our first use of the GoToWebinar platform for this event went extremely well. Thanks to our speakers, moderators and sponsors for making this event possible. Special thanks to HQ staffers Vicki Van Damme and Jane Duffy for a smoothly run event. Coming up: the 24HOP Portuguese Edition will be held November 13-14, followed December 12-13 by the Spanish Edition. Thanks to the Portuguese- and Spanish-speaking community volunteers who are organizing these events. July Board Meeting The Board met July 18-19 in Kansas City. The first order of business was the election of the Executive Committee who will take office January 1. I was elected Vice President of Marketing and will join incoming President Thomas LaRock, incoming Executive Vice President of Finance Adam Jorgensen and Immediate Past President Bill Graziano on the Exec Co. I am honored that my fellow Board members elected me to this position and look forward to serving the organization in this role. Visit to PASS HQ In late September I traveled to Vancouver for my first visit to PASS HQ, where I joined Tom LaRock and Adam Jorgensen to make plans for 2014. Our visit was just a few weeks before PASS Summit and coincided with the Board election, and the office was humming with activity. I saw first-hand the enthusiasm and dedication of everyone there. In each interaction I observed a focus on what is best for PASS and our members. Our partners at HQ are key to the organization’s success. This week at PASS Summit is a great opportunity for all of us to remember that, and say “thanks.” Next Up PASS Summit—of course! I’ll be around all week and look forward to connecting with many of our member over meals, at the Community Zone and between sessions. In the evenings you can find me at the Welcome Reception, Exhibitor’s Reception and Community Appreciation Party. And I will be at the Board Q&A session Friday at 12:45 p.m. Transitions The newly elected Exec Co and Board members take office January 1, and the Virtual Chapter portfolio is transitioning to a new director. I’m thrilled that Jen Stirrup will be taking over. Jen has experience as a volunteer and co-leader of the Business Intelligence Virtual Chapter and was a key contributor to the BI VCs expansion to serving our members in the EMEA region. I’ll be working closely with Jen over the next couple of months to ensure a smooth transition.

Search Results

Search found 6523 results on 261 pages for 'route planning'.

Page 227/261 | < Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234 | Next Page >

- by Louis

- by Lightsauce

- by CP510

- by MacUsers

- by eric01

- by gabeDel

- by Elliot.Bradshaw

- by Beco

- by user29368

- by pinaldave

- by arungupta

- by pinaldave

- by Elke Phelps (Oracle Development)

- by Bobby Diaz

- by imran_ku07

- by JuergenKress

- by Patrick Liekhus

- by PSteele

- by Ben Griswold

- by Maria Forney

- by Michelle Kimihira

- by Piet

- by Jürgen Kress

- by Troy Kitch

- by Denise McInerney

< Previous Page | 223 224 225 226 227 228 229 230 231 232 233 234 | Next Page >