Search Results

Search found 6999 results on 280 pages for 'ie7 bug'.

Page 228/280 | < Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >

• Ubuntu 13.04 installation issues: unable to handle kernel paging request error

  - by user173944

  I wish I could say that I’ve done more for the Linux community as of recent but I am very VERY new to all of this and I feel very much in over my head. I figured I would install Ubuntu. on my computer and then I would learn and contribute to the community simultaneously. I will try to be as detailed as I can, please ask questions if you need clarification. I installed Ubuntu. 13.04 (64-bit) on my dell Inspiron 1501. This has an AMD Turion 64-bit TL-56 1.8 Ghz mobile processor. It is a dual core. It has an ATI Radeon Xpress 1150 chipset in it as well. As of right now I only have a total of 2Ghz ram, however I was planning on upgrading that in the near future so I opted for the 64-bit Ubuntu. 13.04. I first tried the live CD and everything seemed to be functioning correctly other than the wireless (but that's not the issue at hand, there are plenty of guides on the internet on how to get that functioning). The internet worked just fine when it was plugged in so no issues there. However, once I went from that to installing 13.04 (just 13.04, no dual partitioning... I want this computer to run strictly Ubuntu.) it did not work. It took me into a shell that I could not type anything into. In this shell it said Bug: unable to handle kernel paging and then it called a bunch of traces and froze up. I had to hard reset the laptop. I tried the boot-repair program multiple times with many different settings and typically after starting up the laptop would say something along the lines of recursive errors. will attempt to fix and then it would attempt to fix a couple of things, and then the computer would freeze up after the text said end trace... so I had to hard reset it again. I'm not an impatient person either, when I say it would freeze up it would be for a period of at least 15 minutes each time before I decided to hard reset. I attempted to install 12.10 on it instead and I got the same exact message, and when I ran boot-repair it did the same exact thing as before. I am currently in the process of running memtest64+ on the computer's memory, though I really don't believe that, nor any of the hardware is at fault due to the fact that it was still running windows vista perfectly when I had decided to switch over to Ubuntu. so far the memtest has came back just fine without any errors, but I’ve only been running it for approximately an hour. So this is the situation I’m in. I did notice when I was using the live disk that the video driver needed updated so I performed that, though I’m fairly certain that has nothing to do with this. I have also attempted (though I’m not certain that my attempt was successful in accomplishing what I had planned) to manually edit the grub settings by making acpi=0 along top of adding nomodeset to the boot commands. Like I said, I’m not sure I did that correctly though, but I’m fairly certain I did. If anyone needs any more information I will be more than happy to provide it, I will post back once I get the full results of the memtest. I very much appreciate any ideas anyone else has, I’ve been at this for a few days to no avail... thank you

  Read the article

• Automated Error Reporting = More Robust Software

  - by Laila

  I would like to tell you how to revolutionize your software development process </marketing hyperbole> On a more serious note, we (Red Gate's .NET Development team) recently rolled a new tool into our development process which has made our lives dramatically easier AND improved the quality of our software, and I (& one of our developers, Alex Davies) just wanted to take a quick moment to share the love. I work with a development team that takes pride in what they ship, so we take software testing rather seriously. For every development project we run, we allocate at least one software tester for every two developers, and we never ship software without first shipping early access releases and betas to get user feedback. And therein lies the challenge -encouraging users to provide consistent, useful feedback is a headache, but without that feedback, improving the software is. tricky. Until fairly recently, we used the standard (if long-winded) approach of receiving bug reports of variable quality via email or through our support forums. If that didn't give us enough information to reproduce the problem - which was most of the time - we had to enter into a time-consuming to-and-fro conversation with the end-user, to get scrape together the data we needed to work out where the problem lay. As I'm sure you're aware, this is painfully slow. To the delight of the team, we recently got to work with SmartAssembly, which lets us embed automated exception and error reporting into our software with very little pain, and we decided to do a little dogfooding. As a result, we've have made a really handy (if perhaps slightly obvious) discovery: As soon as we release a beta, or indeed any release of software, we now get tonnes of customer feedback through automated error reports. Making this process easier for our users has dramatically increased the amount (and quality) of feedback we get. From their point of view, they get an experience similar to Microsoft's error reporting, and process is essentially idiot-proof. From our side of things, we can now react much faster to the information we get, fixing the bugs and shipping a new-and-improved release, which our users rather appreciate. Smiles and hugs all round. Even more so because, as we're use SmartAssembly's Automated Error Reporting, we get to avoid having to spend weeks building an exception reporting mechanism. It takes just a few minutes to add reporting to a project, and we get a bunch of useful information back, like a stack trace and the values of all the local variables, which we can use to fix bugs. Happily, "Automated Error Reporting = More Robust Software" can actually be read two ways: we've found that we not only ship higher quality software, but we also release within a shorter time. We can ship stable software that our users are happy to upgrade to, and we then bask in the glory of lots of positive customer feedback. Once we'd starting working with SmartAssembly, we were curious to know how widespread error reporting was as a practice. Our product manager ran a survey in autumn last year, and found that 40% of software developers never really considered deploying error reporting. Considering how we've now got plenty of experience on the subject, one of our dev guys, Alex Davies, thought we should share what we've learnt, and he's kindly offered to host a webinar on delivering robust software with Automated Error Reporting. Drawing on our own in-house development experiences, he'll cover how to add error reporting to your program, how to actually use the error reports to fix bugs (don't snigger, not everyone's as bright as you), how to customize the error report dialog that your users see, and how to automatically get log files from your users' machine. The webinar will take place on Jan 25th (that's next week). It's free to attend, but you'll still need to register to hear Alex's dulcet tones.

  Read the article

• Why you shouldn't add methods to interfaces in APIs

  - by Simon Cooper

  It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

  Read the article

• NetBeans Java Hints: Quick & Dirty Guide

  - by Geertjan

  In NetBeans IDE 7.2, a new wizard will be found in the "Module Development" category in the New File dialog, for creating new Java Hints. Select a package in a NetBeans module project. Right click, choose New/Other.../Module Development/Java Hint: You'll then see this: Fill in: Class Name: the name of the class that should be generated. E.g. "Example". Hint Display Name: the display name of the hint itself (as will appear in Tools/Options). E.g. "Example Hint". Warning Message: the warning that should be produced by the hint. E.g. "Something wrong is going on". Hint Description: a longer description of the hint, will appear in Tools/Options and eventually some other places. E.g. "This is an example hint that warns about an example problem." Will also provide an Automatic Fix: whether the hint will provide some kind of transformation. E.g. "yes". Fix Display Name: the display name of such a fix/transformation. E.g. "Fix the problem". Click Finish. Should generate "Example.java", the hint itself: import com.sun.source.util.TreePath; import org.netbeans.api.java.source.CompilationInfo; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.Fix; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.JavaFix; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint(displayName = "DN_com.bla.Example", description = "DESC_com.bla.Example", category = "general") //NOI18N @Messages({"DN_com.bla.Example=Example Hint", "DESC_com.bla.Example=This is an example hint that warns about an example problem."}) public class Example { @TriggerPattern(value = "$str.equals(\"\")", //Specify a pattern as needed constraints = @ConstraintVariableType(variable = "$str", type = "java.lang.String")) @Messages("ERR_com.bla.Example=Something wrong is going on") public static ErrorDescription computeWarning(HintContext ctx) { Fix fix = new FixImpl(ctx.getInfo(), ctx.getPath()).toEditorFix(); return ErrorDescriptionFactory.forName(ctx, ctx.getPath(), Bundle.ERR_com.bla_Example(), fix); } private static final class FixImpl extends JavaFix { public FixImpl(CompilationInfo info, TreePath tp) { super(info, tp); } @Override @Messages("FIX_com.bla.Example=Fix the problem") protected String getText() { return Bundle.FIX_com_bla_Example(); } @Override protected void performRewrite(TransformationContext ctx) { //perform the required transformation } } } Should also generate "ExampleTest.java", a test for it. Unfortunately, the wizard infrastructure is not capable of handling changes related to test dependencies. So the ExampleTest.java has a todo list at its begining: /* TODO to make this test work:  - add test dependency on Java Hints Test API (and JUnit 4)  - to ensure that the newest Java language features supported by the IDE are available,   regardless of which JDK you build the module with:  -- for Ant-based modules, add "requires.nb.javac=true" into nbproject/project.properties  -- for Maven-based modules, use dependency:copy in validate phase to create   target/endorsed/org-netbeans-libs-javacapi-*.jar and add to endorseddirs   in maven-compiler-plugin configuration  */Warning: if this is a project for which tests never existed before, you may need to close&reopen the project, so that "Unit Test Libraries" node appears - a bug in apisupport projects, as far as I can tell.  Thanks to Jan Lahoda for the above rough guide.

  Read the article

• Tyrus 1.8

  - by Pavel Bucek

  Another version of Tyrus, the reference implementation of JSR 356 – Java API for WebSocket is out! Complete list of fixes and features is below, but let me describe some of the new features in more detail. All information presented here is also available in Tyrusdocumentation. What’s new? First to mention is that JSR 356 Maintenance review Ballot is over and the change proposed for 1.1 release was accepted. More details about changes in the API can be found in this article. Important part is that Tyrus 1.8 implements this API, meaning you can use Lambda expressions and some features of Nashorn without the need for any workarounds. Almost all other features are related to client side support, which was significantly improved in this release. Firstly – I have to admit, that Tyrus client contained security issue – SSL Hostname verification was not performed when connecting to “wss” endpoints. This was fixed as part of TYRUS-339 and resulted in some changes in the client configuration API. Now you can control whether HostnameVerification should be performed (SslEngineConfigurator#setHostnameVerificationEnabled(boolean)) or even set your own HostnameVerifier (please use carefully): #setHostnameVerifier(…). Detailed description can be found in Host verification chapter. Another related enhancement is support for Http Basic and Digest authentication schemes. Tyrus client now enables users to provide credentials and underlying implementation will take care of everything else. Our implementation is strictly non pre-emptive, so the login information is sent always as a response to 401 Http Status Code. If the Basic and Digest are not good enough and there is a need to use some custom scheme or something which is not yet supported in Tyrus, custom Authenticator can be registered and the authentication part of the handshake process will be handled by it. Please seeClient HTTP Authentication chapter in the user guide for more details. There are other features, like fine-grain threadpool configuration for JDK client container, build-in Http redirect support and some reshuffling related to unifying the location of client configuration classes and properties definition – every property should be now part of ClientProperties class. All new features are described in the user guide – in chapterTyrus proprietary configuration. Update – Tyrus 1.8.1 There was another slightly late reported issue related to running in environments with SecurityManager enabled, so this version fixes that. Another noteworthy fixes are TYRUS-355 and TYRUS-361; the first one is about incorrect thread factory used for shared container timeout, which resulted in JVM waiting for that thread and not exiting as it should. The other issue enables relative URIs in Location header when using redirect feature. Links Tyrus homepage mailing list JIRA Complete list of changes: Bug [TYRUS-333] – Multiple endpoints on one client [TYRUS-334] – When connection is closed by a peer, periodic heartbeat pong is not stopped [TYRUS-336] – ReaderBuffer.getNextChars() keeps blocking a server thread after client has closed the session [TYRUS-338] – JDK client SSL filter needs better synchronization during handshake phase [TYRUS-339] – SSL hostname verification is missing [TYRUS-340] – Test PathParamTest are not stable with JDK client [TYRUS-341] – A control frame inside a stream of continuation frames is treated as the part of the stream [TYRUS-343] – ControlFrameInDataStreamTest does not pass on GF [TYRUS-345] – NPE is thrown, when shared container timeout property in JDK client is not set [TYRUS-346] – IllegalStateException is thrown, when using proxy in JDK client [TYRUS-347] – Introduce better synchronization in JDK client thread pool [TYRUS-348] – When a client and server close connection simultaneously, JDK client throws NPE [TYRUS-356] – Tyrus cannot determine the connection port for a wss URL [TYRUS-357] – Exception thrown in MessageHandler#OnMessage is not caught in @OnError method [TYRUS-359] – Client based on Java 7 Asynchronous IO makes application unexitable Improvement [TYRUS-328] – JDK 1.7 AIO Client container – threads – (setting threadpool, limits, …) [TYRUS-332] – Consolidate shared client properties into one file. [TYRUS-337] – Create an SSL version of Basic Servlet test New Feature [TYRUS-228] – Add client support for HTTP Basic/Digest Task [TYRUS-330] – create/run tests/servlet/basic via wss [TYRUS-335] – [clustering] – introduce RemoteSession and expose them via separate method (not include remote sessions in the getOpenSessions()) [TYRUS-344] – Introduce Client support for HTTP Redirect

  Read the article

• How does the Trash Can work, and where can I find official documentation, reference, or specification for it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always uses <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, it's annoying: if I have 15 users, I end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why does it never use it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash; it gives an error. Try to delete any file, it says "it can't move to trash". Ok, I know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why the error then? Bug? Why must I change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from the standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find a technical reference for Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what I am doing wrong, especially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for the sticky bit (VFAT, NTFS), it probably doesn't have for permissions either (at least VFAT surely doesn't). So what prevents one user from purging / restoring other users' ./Trash-xxx ? If one can read/write his own Trash, one can do the same for the whole drive, including other's trashes, correct? Or does Gnome have some kind of "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permissions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really prefer to use /.Trash/xxx format... For the root issue: for the / partition, I can use trash as root, and it goes to /root/.local/shate/Trash. But if I click on Nautilus "Trash" (as root), I get an error. Don't you? So files are correctly trashed, but I can't access it. All I can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc.). For non-/ partitions (or at least for VFAT/NTFS), I can not even use trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permanently delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really clutter the desktop and/or Nautilus. I'd rather have it pre-mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives. So, if Ubuntu/Gnome truly follows the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• How does Trash Can works? Where can i find official specification / documentation / reference about it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always use <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, its annoying: if i have 15 users, i end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why it never uses it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash, it gives error. Try to delete any file, it says "it cant move to trash". Ok, i know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why error then? Bug? Why do i must change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find technical reference about Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what am i doing wrong, specially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for sticky bit (VFAT, NTFS), it probably dont have for permitions either (at least VFAT surely doesnt). So what prevents one user for purging / restoring other users ./Trash-xxx ? If one can read/write his own Trash, he can also do the same for the whole drive, including other's trashes, isnt it? Or does Gnome has any "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permitions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really want to use /.Trash/xxx format... For the root issue: for the / partition, i can trash as root, and it goes to /root/.local/shate/Trash. But if i click on Nautilus "Trash" (as root), i get an error. Dont you? So files are correctly trashed, but i cant access it. All i can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc) For non-/ partitions (or at least for VFAT/NTFS), I can not even trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permantly delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really cluttter desktop and/or Nautilus. Id rather have it pre mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives Si, if Ubuntu/Gnome truly follow the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• New features in TFS Demo Setup 1.0.0.2

  - by Tarun Arora

  Release Notes – http://tfsdemosetup.codeplex.com/ | Download | Source Code | Report a Bug | Ideas Just pushed out the 2nd release of the TFS Demo setup on CodePlex, below a quick look at some of the new features/improvements in the tool… Details of the existing features can be found here. Feature 1 – Set up Work Items Queries as Team Favorites The task board looks cooler when the team favourite work item queries show up on the task board. The demo setup console application now has the ability to set up the work item queries as team favorites for you. If you want to see how you can add Team Favorites programmatically, refer to this blogpost here. Image 1 – Task board without Team Favorites Let’s see how the TFS Demo Setup application sets-up team favorites as part of the run… Open up the DemoDictionary.xml and you should be able to see the new node <TeamFavorites> this accepts multiple <TeamFavorite>. You simply need to specify the <Type> as Query and in the <Name> specify the name of the work item query that you would like added as a favorite. Image 2 – Highlighting the TeamFavorites block in DemoDictionary.xml So, when the demo set up application is run with the above config, work item queries “Blocked Tasks” and “Open Impediments” are added as team favorites. They then show up on the task board, as highlighted in the screen shot below. Image 3 – Team Favorites setup during the TFS demo setup app execution Feature 2 – Choose what you want to setup and exclude the rest I had a great feature request come in requesting the ability to exclude parts of the setup at the sole discretion of the executioner. To accommodate this, I have added an attribute with each block, the attribute “Run” accepts “true” or “false”. If you set the flag to true then at the time of execution that block would be considered for setup and if you set the flag to false, the block will be ignored during the setup. So, lets look at an example below… The attribute "Run” is set to true for TeamSettings, Team Favorites, TeamMembers and WorkItems. So, all of these would be setup as part of the demo setup application execution. Image 4 – New Attribute Run added to all blocks in DemoDictionary.xml If I did not want to recreate the team and did not want to add new work items but only wanted to add favorites and team members to the existing team “AgileChamps1” then I could simple run the application with below DemoDictionary.xml. Note – TeamSettings Run=”false” and WorkItems Run=”false”. Image 5 – TeamFavorites and TeamMembers set as true and others set to false Feature 3 – Usability Improvement If you try and assign a work item to a team member that does not exist then the application throws a nasty exception. This behaviour has now been changed, upon adding such a work item, the work items will be created and not assigned to any user. The work item id will be printed to the console making it simple for you to assign the work item manually. As you can see in the screen shot below, I am trying to assign the work item to a user “Tarun” and a user “v2” both are *not valid users in my team project collection* so the tool creates the work items and provides me the work item id and lets me know that since the user is invalid the work item could not be assigned to the user. Better user experience ae Image 6 – Behaviour if work item assigned to users are in valid users in team project That’s about it for the current release. I have some new features planned for the next release. Mean while if you have any ideas/comments please feel free to leave a comment. Stay tuned for more… Enjoy! Other posts on TFS Demo Setup can be found here.

  Read the article

• Help finding missing mumble-server dependencies

  - by Otoris

  I'm trying to install the mumble-server package using apt-get install mumble-server on Ubuntu 11.10 Server Edition on Rackspace Cloud. Problem is it can't find dependencies it should have found because they exist on launchpad.net? Dependencies message: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mumble-server : Depends: libavahi-compat-libdnssd1 (>= 0.6.16) but it is not installable Depends: libprotobuf7 but it is not installable Depends: libqt4-dbus (>= 4:4.5.3) but it is not installable Depends: libqt4-network (>= 4:4.5.3) but it is not installable Depends: libqt4-sql (>= 4:4.5.3) but it is not installable Depends: libqt4-xml (>= 4:4.5.3) but it is not installable Depends: libqtcore4 (>= 4:4.7.0~beta1) but it is not installable Depends: libqt4-sql-sqlite but it is not installable E: Unable to correct problems, you have held broken packages. Any ideas on if I might be missing sources? I've been googling around and haven't found anyone else in this situation or anyone else not able to install the aforementioned packages. Thanks for your time! sources.list: deb http://mirror.rackspace.com/ubuntu/ oneiric restricted deb-src http://mirror.rackspace.com/ubuntu/ oneiric restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://mirror.rackspace.com/ubuntu/ oneiric-updates restricted deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://mirror.rackspace.com/ubuntu/ oneiric universe deb-src http://mirror.rackspace.com/ubuntu/ oneiric universe deb http://mirror.rackspace.com/ubuntu/ oneiric-updates universe deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://mirror.rackspace.com/ubuntu/ oneiric multiverse deb-src http://mirror.rackspace.com/ubuntu/ oneiric multiverse deb http://mirror.rackspace.com/ubuntu/ oneiric-updates multiverse deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ oneiric-backports restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-backports restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. This software is not part of Ubuntu, but is ## offered by Canonical and the respective vendors as a service to Ubuntu ## users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner deb http://security.ubuntu.com/ubuntu oneiric-security restricted deb-src http://security.ubuntu.com/ubuntu oneiric-security restricted deb http://security.ubuntu.com/ubuntu oneiric-security universe deb-src http://security.ubuntu.com/ubuntu oneiric-security universe deb http://security.ubuntu.com/ubuntu oneiric-security multiverse deb-src http://security.ubuntu.com/ubuntu oneiric-security multiverse # Cool Kid Webmin/Usermin Here Brah deb http://download.webmin.com/download/repository sarge contrib deb http://webmin.mirror.somersettechsolutions.co.uk/repository sarge contrib

  Read the article

• What information must never appear in logs?

  - by MainMa

  I'm about to write the company guidelines about what must never appear in logs (trace of an application). In fact, some developers try to include as many information as possible in trace, making it risky to store those logs, and extremely dangerous to submit them, especially when the customer doesn't know this information is stored, because she never cared about this and never read documentation and/or warning messages. For example, when dealing with files, some developers are tempted to trace the names of the files. For example before appending file name to a directory, if we trace everything on error, it will be easy to notice for example that the appended name is too long, and that the bug in the code was to forget to check for the length of the concatenated string. It is helpful, but this is sensitive data, and must never appear in logs. In the same way: Passwords, IP addresses and network information (MAC address, host name, etc.)¹, Database accesses, Direct input from user and stored business data must never appear in trace. So what other types of information must be banished from the logs? Are there any guidelines already written which I can use? ¹ Obviously, I'm not talking about things as IIS or Apache logs. What I'm talking about is the sort of information which is collected with the only intent to debug the application itself, not to trace the activity of untrusted entities. Edit: Thank you for your answers and your comments. Since my question is not too precise, I'll try to answer the questions asked in the comments: What I'm doing with the logs? The logs of the application may be stored in memory, which means either in plain on hard disk on localhost, in a database, again in plain, or in Windows Events. In every case, the concern is that those sources may not be safe enough. For example, when a customer runs an application and this application stores logs in plain text file in temp directory, anybody who has a physical access to the PC can read those logs. The logs of the application may also be sent through internet. For example, if a customer has an issue with an application, we can ask her to run this application in full-trace mode and to send us the log file. Also, some application may sent automatically the crash report to us (and even if there are warnings about sensitive data, in most cases customers don't read them). Am I talking about specific fields? No. I'm working on general business applications only, so the only sensitive data is business data. There is nothing related to health or other fields covered by specific regulations. But thank you to talk about that, I probably should take a look about those fields for some clues about what I can include in guidelines. Isn't it easier to encrypt the data? No. It would make every application much more difficult, especially if we want to use C# diagnostics and TraceSource. It would also require to manage authorizations, which is not the easiest think to do. Finally, if we are talking about the logs submitted to us from a customer, we must be able to read the logs, but without having access to sensitive data. So technically, it's easier to never include sensitive information in logs at all and to never care about how and where those logs are stored.

  Read the article

• Undefined fireball movement behavior

  - by optimisez

  Demonstration video I try to do after the player shoot 10 times of fireball, then delete all the fireball objects and recreate a 10 new set of fireball objects. I did it but there is a weird bug happens that sometimes the fireball will come out from top and move to the right after shooting a few times. All the 10 fireballs should follow the player all the time and all the fireball should come out from player even after a new set of fireballs is recreated. Any ideas to fix it? Variables typedef struct gameObject{ float X; float Y; int length; int height; bool action; }; // Fireball #define FIREBALL_NUM 10 LPDIRECT3DTEXTURE9 fireball = NULL; RECT fireballRect; gameObject *fireballDest = new gameObject[FIREBALL_NUM]; int iFireBallAnimation; int fireballCount = 0; Set up Fireball void setUpFireBall() { // Initialize destination rectangle, rectangle height and length for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].X = 0; fireballDest[i].Y = 0; fireballDest[i].length = fireballRect.right - fireballRect.left; fireballDest[i].height = fireballRect.bottom - fireballRect.top; } iFireBallAnimation = fireballRect.right - fireballRect.left; // Initialize boolean for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].action = false; } } Initialize fireball void initFireball() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "fireball.png", 512, 512, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 0), NULL, NULL, &fireball); // Initialize source rectangle fireballRect.left = 0; fireballRect.top = 256; fireballRect.right = 64; fireballRect.bottom = 320; setUpFireBall(); } Update fireball void update() { updateAnimation(); updateAI(); updatePhysics(); updateGameState(); } void updatePhysics() { motion(); collison(); } void motion() { playerMove(); playerJump(); playerGravity(); shootFireball(); fireballFollowPlayer(); } void shootFireball() { if (keyArr['Z']) fireballDest[fireballCount].action = true; if (fireballDest[fireballCount].action) { fireballDest[fireballCount].X += 10; if (fireballDest[fireballCount].X > 800) fireballCount++; } } void fireballFollowPlayer() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action == false) { fireballDest[i].X = playerDest.X - 30; fireballDest[i].Y = playerDest.Y - 14; } } } void updateGameState() { // When no more fireball left, rearm fireball if (fireballCount == FIREBALL_NUM) { delete[] fireballDest; fireballDest = new gameObject[10]; fireballCount = 0; setUpFireBall(); } } Render fireball void renderFireball() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action) sprite->Draw(fireball, &fireballRect, NULL, &D3DXVECTOR3(fireballDest[i].X, fireballDest[i].Y, 0), D3DCOLOR_XRGB(255,255, 255)); } }

  Read the article

• links for 2010-12-23

  - by Bob Rhubart

  Oracle VM Virtualbox 4.0 extension packs (Wim Coekaerts Blog) Wim Coekaerts describes the the new extension pack in Oracle VM Virtualbox 4.0 and how it's different from 3.2 and earlier releases. (tags: oracle otn virtualization virtualbox) Oracle Fusion Middleware Security: Creating OES SM instances on 64 bit systems "I've already opened a bug on this against OES 10gR3 CP5, but in case anyone else runs into it before it gets fixed I wanted to blog it too. (NOTE: CP5 is when official support was introduced for running OES on a 64 bit system with a 64 bit JVM)" - Chris Johnson (tags: oracle otn fusionmiddleware security) Oracle Enterprise Manager Grid Control: Shared loader directory, RAC and WebLogic Clustering "RAC is optional. Even the load balancer is optional. The feed from the agents also goes to the load balancer on a different port and it is routed to the available management server. In normal case, this is ok." - Porus Homi Havewala (tags: WebLogic oracle otn grid clustering) Magic Web Doctor: Thought Process on Upgrading WebLogic Server to 11g "Upgrading to new versions can be challenging task, but it's done for linear scalability, continuous enhanced availability, efficient manageability and automatic/dynamic infrastructure provisioning at a low cost." - Chintan Patel (tags: oracle otn weblogic upgrading) InfoQ: Using a Service Bus to Connect the Supply Chain Peter Paul van de Beek presents a case study of using a service bus in a supply channel connecting a wholesale supplier with hundreds of retailers, the overall context and challenges faced – including the integration of POS software coming from different software providers-, the solution chosen and its implementation, how it worked out and the lessons learned along the way. (tags: ping.fm) Oracle VM VirtualBox 4.0 is released! - The Fat Bloke Sings The Fat Bloke spreads the news and shares some screenshots.  (tags: oracle otn virtualization virtualbox) Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help. (Oracle's Virtualization Blog) "So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work?" - Adam Hawley (tags: oracle otn virtualization security) OTN ArchBeat Podcast Guest Roster As the OTN ArchBeat Podcast enters its third year, it's time to acknowledge the invaluable contributions of the guests who have participated in ArchBeat programs. Check out this who's who of ArchBeat podcast panelists, with links to their respective interviews and more. (tags: oracle otn oracleace podcast archbeat) Show Notes: Architects in the Cloud (ArchBeat) Now available! Part 2 (of 4) of the ArchBeat interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing." (tags: oracle otn podcast cloud) A Cautionary Tale About Multi-Source JNDI Configuration (Scott Nelson's Portal Productivity Ponderings) "I ran into this issue after reading that p13nDataSource and cgDataSource-NonXA should not be configured as multi-source. There were some issues changing them to use the basic JDBC connection string and when rolling back to the bad configuration the server went 'Boom.'" - Scott Nelson (tags: weblogic jdbc oracle jndi)

  Read the article

• How to Mentor a Junior Developer

  - by Josh Johnson

  This title is a little broad but I may need to give a little background before I can ask my question properly. I know that similar questions have been asked here already. But in my case I'm not asking if I should be mentoring someone or if the person is a good fit for being a software developer. That is not my place to judge. I have not been asked outright, but it is apparent that myself and other fellow senior developers are to mentor the new developers that start here. I have no problem with this whatsoever and, in many cases, it lends me a fresh perspective on things and I end up learning in the process. Also, I remember how beneficial it was in the beginning of my career when someone would take some time to teach me something. When I say "new developer" they could be anywhere from fresh out of college to having a year or two of experience. Recently and in the past we've had people start here who seem to have an attitude toward development/programming which is different from mine and hard for me to reconcile; they seem to extract just enough information to get the task done but not really learn from it. I find myself going over and over the same issues with them. I understand that part of this could be a personality thing, but I feel it's my job to do my best and sort of push them out of the nest while they're under my wing, so to speak. How can I impart just enough information so that they will learn but not give so much as to solve the problem for them? Or perhaps: What's the proper response to questions that are designed to take the path of least resistance and, in essence, force them to learn instead of take the easy way out? These questions are probably more general teaching questions and don't have that much to do specifically with software development. Note: I do not get a say in what tasks they are working on. Management doles the task out and it could be anything from a very simple bug fix to starting an entire application by themselves. While this is not ideal by any means and obviously presents its own gauntlet of challenges, I feel it's a topic best left for another question. So the best I can do is help them with the problem at hand and try to help them break it down into simpler problems and also check their commit logs and point out mistakes that they made. My main objectives are to: Help them out and give them the tools they need to start becoming more self-reliant. Steer them in the right direction and break bad development habits early on. Lessen the amount of time I spend with them (the personality type described above seems to need much more one-on-one time and does not do well over IM or email. While that's generally fine, I can't always stop what I'm working on, break my stride, and help them debug an error on a moments notice; I have my own projects that need to get done).

  Read the article

• Workflow versioning

  - by Nitra

  I believe I have a fundamental misunderstanding when it comes to workflow engines which I would appreciate if you could help me sort out. I'm not sure if my misunderstanding is specific to the workflow engine I'm using, or if it's a general misunderstanding. I happen to use Windows Workflow Foundation (WWF). TLDR-version WWF allows you to implement business processes in long-running workflows (think months or even years). When started, the workflows can't be changed. But what business process can't change at any time? And if a business process changes, wouldn't you want your software to reflect this change for already started 'instances' of the business process? What am I missing? Background In WWF you define a workflow by combining a set of activites. There are different types of activities - some of them are for flow control, such as the IfElseActivity and the WhileActivty while others allows you to perform actual tasks, such as the CodeActivity wich allows you to run .NET code and the InvokeWebServiceActivity which allows you to call web services. The activites are combined to a workflow using a visual designer. You pretty much drag-and-drop activities from a toolbox to a designer area and connect the activites to each other. The workflow and activities have input paramters, output parameters and variables. We have a single workflow which sometimes runs in a matter of a few days, but it may run for 5-6 months. WWF takes care of persisting the workflow state (what activity are we currently executing, what are the variable values and so on). So far I think WWF makes sense. Some people will prefer to implement a software representation of a business process using a visual designer over writing all of it in code. So what's the issue then? What I don't really get is the following: WWF is designed to take care of long-running workflows. But at the same time, WWF has no built-in functionality which allows you to modify the running workflows. So if you model a business process using a workflow and run that for 6 months, you better hope that the business process does not change. Because if it do, you'll have to have multiple versions of the workflow executing at the same time. This seems like a fundamental design mistake to me, but at the same time it seems more likely that I've misunderstood something. For us, this has had some real-world effects: We release new versions every month, but some workflows may run for a year. This means that we have several versions of the workflow running in parallell, in other words several versions of the business logics. This is the same as having many differnt versions of your code running in production in the same system at the same time, which becomes a bit hard to understand for users. (depending on on whether they clicked a 'Start' button 9 or 10 months ago, the software will behave differently) Our workflow refers to different types of entities and since WWF now has persisted and serialized these we can't really refactor the entities since then existing workflows can't be resumed (deserialization will fail We've received some suggestions on how to handle this When we create a new version of the workflow, cancel all running workflows and create new ones. But in our workflows there's a lot of manual work involved and if we start from scratch a lot of people has to re-do their work. Track what has been done in the workflow and when you create a new one skip activites which have already been executed. I feel that this alternative may work for simple workflows, but it becomes hairy to automatically figure out what activities to skip if there's major refactoring done to a workflow. When we create a new version of the workflow, upgrade old versions using the new WWF 4.5 functionality for upgrading workflows. But then we would have to skip using the visual designer and write code to inject activities in the right places in the workflow. According to MSDN, this upgrade functionality is only intended for minor bug fixes and not larger changes. What am I missing?

  Read the article

• How do I revert updates/tweaks to get to a usable GUI?

  - by Frankenmartin

  I just installed 12.04 the other day and then ran into trouble upon restarting after installing updates. What I did before the problem occurred: I did not make many changes before this problem occurred. Changes I did make included: Downloading and installing Adobe Flash Player (off topic but: I am under the impression that Java, "C&C" and Shockwave can not be run in Ubuntu. Could anybody verify this?) I also installed gnome-tweak-tool and used it to install several themes. These themes worked well until restarting after the update. Is it possible that one of these themes caused the problem (in combination with the update or because of the restart)? Installed 215 updates from update manager and restarted my system. Current Situation: Unity 3D is unusable since restarting after running updates. When I log in after entering my password the following things happen: the overhead panel disappears and the screen goes black for a minute my wallpaper flashes for a couple seconds but then the screen goes black again after another minute the wallpaper reappears but nothing else does and I am not able to open anything or even right click. after 5 minutes I can finally get a right click menu eventually a box comes up warning about a Compiz failure and asking to let it quit--which I did. Using the right click functionality I was able to create a new folder on the desktop and use this to open a file browser. In doing so I noticed that the downloads I had made were missing (music, image files, etc., even after unpacking several .zip and .rar files) even though I believe that everything should still be there. Any new windows that I create are un-closable/minimizable/movable/etc, because the window bars are missing. I have tried rebooting several times but the results are the same. I was able to browse some off the System Settings windows by clicking on the wallpaper link in the right click menu. In doing so I navigated into the update manager and noticed that updates were selected to be accepted from some "unsupported sources". I do not recall setting these options myself and wonder why these--potentially dangerous--options would be selected by default. Unity 2D is usable but not free of bugs--I stumbled across the ability to log into a Unity 2D session while trying to log into Unity 3D. So far I have only noticed one bug in Unity 2D: the close, minimize and maximize buttons are invisible--however they are still usable despite being invisible. What I need: I'm very new to Linux and Ubuntu and still am in the feeling out stages. As such I will have some trouble answering clarifying questions. I haven't used the terminal yet and would probably not be comfortable using it without very clear instructions. What I do need is to know how I can roll back/remove all those updates so I can use my computer regularly again. I do believe that I could follow step-by-step instructions as long as they are clear and concise if someone knows what my problem is.

  Read the article

• jtreg update, December 2012

  - by jjg

  There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

  Read the article

• Hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Know Your Service Request Status

  - by Get Proactive Customer Adoption Team

  Untitled Document To monitor a Service Request or not to monitor a Service Request... That should never be the question Monitoring the Service Requests you create is an essential part of the process to resolve your issue when you work with a Support Engineer. If you monitor your Service Request, you know at all times where it is in the process, or to be more specific, you know at all times what action the Support Engineer has taken on your request and what the next step is. When you think about it, it is rather simple... Oracle Support is working the issue, Oracle Development is working the issue, or you are. When you check on the status, you may find that the Support Engineer has a question for you or the engineer is waiting for more information to resolve the issue. If you monitor the Service Request, and respond quickly, the process keeps moving, and you’ll get your answer more quickly. Monitoring a Service Request is easy. All you need to do is check the status codes that the Support Engineer or the system assigns to your Service Request. These status codes are not static. You will see that during the life of your Service request, it will go through a variety of status codes. The best advice I can offer you when you monitor your Service Request is to watch the codes. If the status is not changing, or if you are not getting responses back within the agreed timeframes, you should review the action plan the Support Engineer has outlined or talk about a new action plan. Here are the most common status codes: Work in Progress indicates that your Support Engineer is researching and working the issue. Development Working means that you have a code related issue and Oracle Support has submitted a bug to Development. Please pay a particular attention to the following statuses; they indicate that the Support Engineer is waiting for a response from you: Customer Working usually means that your Support Engineer needs you to collect additional information, needs you to try something or to apply a patch, or has more questions for you. Solution Offered indicates that the Support Engineer has identified the problem and has provided you with a solution. Auto-Close or Close Initiated are statuses you don’t want to see. Monitoring your Service Request helps prevent your issues from reaching these statuses. They usually indicate that the Support Engineer did not receive the requested information or action from you. This is important. If you fail to respond, the Support Engineer will attempt to contact you three times over a two-week period. If these attempts are unsuccessful, he or she will initiate the Auto-Close process. At the end of this additional two-week period, if you have not updated the Service Request, your Service Request is considered abandoned and the Support Engineer will assign a Customer Abandoned status. A Support Engineer doesn’t like to see this status, since he or she has been working to solve your issue, but we know our customers dislike it even more, since it means their issue is not moving forward. You can avoid delays in resolving your issue by monitoring your Service Request and acting quickly when you see the status change. Respond to the request from the engineer to answer questions, collect information, or to try the offered solution. Then the Support Engineer can continue working the issue and the Service Request keeps moving forward towards resolution. Keep in mind that if you take an extended period of time to respond to a request or to provide the information requested, the Support Engineer cannot take the next step. You may inadvertently send an implicit message about the problem’s urgency that may not match the Service Request priority, and your need for an answer. Help us help you. We want to get you the answer as quickly as possible so you can stay focused on your company’s objectives. Now, back to our initial question. To monitor Service Requests or not to monitor Service Requests? I think the answer is clear: yes, monitor your Service Request to resolve the issue as quickly as possible.

  Read the article

• Using Appendbuffers in unity for terrain generation

  - by Wardy

  Like many others I figured I would try and make the most of the monster processing power of the GPU but I'm having trouble getting the basics in place. CPU code: using UnityEngine; using System.Collections; public class Test : MonoBehaviour { public ComputeShader Generator; public MeshTopology Topology; void OnEnable() { var computedMeshPoints = ComputeMesh(); CreateMeshFrom(computedMeshPoints); } private Vector3[] ComputeMesh() { var size = (32*32) * 4; // 4 points added for each x,z pos var buffer = new ComputeBuffer(size, 12, ComputeBufferType.Append); Generator.SetBuffer(0, "vertexBuffer", buffer); Generator.Dispatch(0, 1, 1, 1); var results = new Vector3[size]; buffer.GetData(results); buffer.Dispose(); return results; } private void CreateMeshFrom(Vector3[] generatedPoints) { var filter = GetComponent<MeshFilter>(); var renderer = GetComponent<MeshRenderer>(); if (generatedPoints.Length > 0) { var mesh = new Mesh { vertices = generatedPoints }; var colors = new Color[generatedPoints.Length]; var indices = new int[generatedPoints.Length]; //TODO: build this different based on topology of the mesh being generated for (int i = 0; i < indices.Length; i++) { indices[i] = i; colors[i] = Color.blue; } mesh.SetIndices(indices, Topology, 0); mesh.colors = colors; mesh.RecalculateNormals(); mesh.Optimize(); mesh.RecalculateBounds(); filter.sharedMesh = mesh; } else { filter.sharedMesh = null; } } } GPU code: #pragma kernel Generate AppendStructuredBuffer<float3> vertexBuffer : register(u0); void genVertsAt(uint2 xzPos) { //TODO: put some height generation code here. // could even run marching cubes / dual contouring code. float3 corner1 = float3( xzPos[0], 0, xzPos[1] ); float3 corner2 = float3( xzPos[0] + 1, 0, xzPos[1] ); float3 corner3 = float3( xzPos[0], 0, xzPos[1] + 1); float3 corner4 = float3( xzPos[0] + 1, 0, xzPos[1] + 1 ); vertexBuffer.Append(corner1); vertexBuffer.Append(corner2); vertexBuffer.Append(corner3); vertexBuffer.Append(corner4); } [numthreads(32, 1, 32)] void Generate (uint3 threadId : SV_GroupThreadID, uint3 groupId : SV_GroupID) { uint2 currentXZ = unint2( groupId.x * 32 + threadId.x, groupId.z * 32 + threadId.z); genVertsAt(currentXZ); } Can anyone explain why when I call "buffer.GetData(results);" on the CPU after the compute dispatch call my buffer is full of Vector3(0,0,0), I'm not expecting any y values yet but I would expect a bunch of thread indexes in the x,z values for the Vector3 array. I'm not getting any errors in any of this code which suggests it's correct syntax-wise but maybe the issue is a logical bug. Also: Yes, I know I'm generating 4,000 Vector3's and then basically round tripping them. However, the purpose of this code is purely to learn how round tripping works between CPU and GPU in Unity.

  Read the article

• When row estimation goes wrong

  - by Dave Ballantyne

  Whilst working at a client site, I hit upon one of those issues that you are not sure if that this is something entirely new or a bug or a gap in your knowledge. The client had a large query that needed optimizing.  The query itself looked pretty good, no udfs, UNION ALL were used rather than UNION, most of the predicates were sargable other than one or two minor ones.  There were a few extra joins that could be eradicated and having fixed up the query I then started to dive into the plan. I could see all manor of spills in the hash joins and the sort operations,  these are caused when SQL Server has not reserved enough memory and has to write to tempdb.  A VERY expensive operation that is generally avoidable.  These, however, are a symptom of a bad row estimation somewhere else, and when that bad estimation is combined with other estimation errors, chaos can ensue. Working my way back down the plan, I found the cause, and the more I thought about it the more i came convinced that the optimizer could be making a much more intelligent choice. First step is to reproduce and I was able to simplify the query down a single join between two tables, Product and ProductStatus,  from a business point of view, quite fundamental, find the status of particular products to show if ‘active’ ,’inactive’ or whatever. The query itself couldn’t be any simpler The estimated plan looked like this: Ignore the “!” warning which is a missing index, but notice that Products has 27,984 rows and the join outputs 14,000. The actual plan shows how bad that estimation of 14,000 is : So every row in Products has a corresponding row in ProductStatus.  This is unsurprising, in fact it is guaranteed,  there is a trusted FK relationship between the two columns.  There is no way that the actual output of the join can be different from the input. The optimizer is already partly aware of the foreign key meta data, and that can be seen in the simplifiction stage. If we drop the Description column from the query: the join to ProductStatus is optimized out. It serves no purpose to the query, there is no data required from the table and the optimizer knows that the FK will guarantee that a matching row will exist so it has been removed. Surely the same should be applied to the row estimations in the initial example, right ?  If you think so, please upvote this connect item. So what are our options in fixing this error ? Simply changing the join to a left join will cause the optimizer to think that we could allow the rows not to exist. or a subselect would also work However, this is a client site, Im not able to change each and every query where this join takes place but there is a more global switch that will fix this error,  TraceFlag 2301. This is described as, perhaps loosely, “Enable advanced decision support optimizations”. We can test this on the original query in isolation by using the “QueryTraceOn” option and lo and behold our estimated plan now has the ‘correct’ estimation. Many thanks goes to Paul White (b|t) for his help and keeping me sane through this

  Read the article

• nvidia driver problems after upgrading to 3.2.0-26 on Ubuntu 12.04 64bit

  - by Lev Levitsky

  After installing latest updates I can't set screen resolution higher than 1024x768; every time after the boot I get a message Could not apply the stored configuration for the monitors (Note: removing ~/.config/monitors.xml stopped the message, but not the problem) I can boot with 3.2.0-25 and the graphics look normal. Here's what I have in /var/log/apt/term.log (excerpt): Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found linux image: /boot/vmlinuz-3.2.0-25-generic Found initrd image: /boot/initrd.img-3.2.0-25-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found linux image: /boot/vmlinuz-3.0.0-17-generic Found initrd image: /boot/initrd.img-3.0.0-17-generic Found memtest86+ image: /boot/memtest86+.bin I went to "additional drivers" and saw some updates available there, but an attempt to install them failed, leaving the following in /var/log/jockey.log (long log, pasted here). The full log won't fit in the question, so I'm showing $ fgrep 'ERROR' /var/log/jockey.log 2012-06-30 17:29:57,897 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-06-30 17:29:57,937 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-06-30 17:29:58,072 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-06-30 17:29:58,240 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:58,293 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:29:58,351 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:58,385 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:58,420 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-06-30 17:29:58,455 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-06-30 17:29:58,478 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-06-30 17:29:58,531 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-06-30 17:29:58,588 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-06-30 17:29:59,537 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:59,613 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:59,686 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:59,764 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,544 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,545 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting I'm not sure if it's a bug, as the first log shows some errors. What can I try?

  Read the article

• Comparing Apples and Pairs

  - by Tony Davis

  A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

  Read the article

• Know your Data Lineage

  - by Simon Elliston Ball

  An academic paper without the footnotes isn’t an academic paper. Journalists wouldn’t base a news article on facts that they can’t verify. So why would anyone publish reports without being able to say where the data has come from and be confident of its quality, in other words, without knowing its lineage. (sometimes referred to as ‘provenance’ or ‘pedigree’) The number and variety of data sources, both traditional and new, increases inexorably. Data comes clean or dirty, processed or raw, unimpeachable or entirely fabricated. On its journey to our report, from its source, the data can travel through a network of interconnected pipes, passing through numerous distinct systems, each managed by different people. At each point along the pipeline, it can be changed, filtered, aggregated and combined. When the data finally emerges, how can we be sure that it is right? How can we be certain that no part of the data collection was based on incorrect assumptions, that key data points haven’t been left out, or that the sources are good? Even when we’re using data science to give us an approximate or probable answer, we cannot have any confidence in the results without confidence in the data from which it came. You need to know what has been done to your data, where it came from, and who is responsible for each stage of the analysis. This information represents your data lineage; it is your stack-trace. If you’re an analyst, suspicious of a number, it tells you why the number is there and how it got there. If you’re a developer, working on a pipeline, it provides the context you need to track down the bug. If you’re a manager, or an auditor, it lets you know the right things are being done. Lineage tracking is part of good data governance. Most audit and lineage systems require you to buy into their whole structure. If you are using Hadoop for your data storage and processing, then tools like Falcon allow you to track lineage, as long as you are using Falcon to write and run the pipeline. It can mean learning a new way of running your jobs (or using some sort of proxy), and even a distinct way of writing your queries. Other Hadoop tools provide a lot of operational and audit information, spread throughout the many logs produced by Hive, Sqoop, MapReduce and all the various moving parts that make up the eco-system. To get a full picture of what’s going on in your Hadoop system you need to capture both Falcon lineage and the data-exhaust of other tools that Falcon can’t orchestrate. However, the problem is bigger even that that. Often, Hadoop is just one piece in a larger processing workflow. The next step of the challenge is how you bind together the lineage metadata describing what happened before and after Hadoop, where ‘after’ could be  a data analysis environment like R, an application, or even directly into an end-user tool such as Tableau or Excel. One possibility is to push as much as you can of your key analytics into Hadoop, but would you give up the power, and familiarity of your existing tools in return for a reliable way of tracking lineage? Lineage and auditing should work consistently, automatically and quietly, allowing users to access their data with any tool they require to use. The real solution, therefore, is to create a consistent method by which to bring lineage data from these data various disparate sources into the data analysis platform that you use, rather than being forced to use the tool that manages the pipeline for the lineage and a different tool for the data analysis. The key is to keep your logs, keep your audit data, from every source, bring them together and use the data analysis tools to trace the paths from raw data to the answer that data analysis provides.

  Read the article

• Running Powershell from within SharePoint

  - by Norgean

  Just because something is a daft idea, doesn't mean it can't be done. We sometimes need to do some housekeeping - like delete old files or list items or… yes, well, whatever you use Powershell for in a SharePoint world. Or it could be that your solution has "issues" for which you have Powershell solutions, but not the budget to transform into proper bug fixes. So you create a "how to" for the ITPro guys. Idea: What if we keep the scripts in a list, and have SharePoint execute the scripts on demand? An announcements list (because of the multiline body field). Warning! Let us be clear. This list needs to be locked down; if somebody creates a malicious script and you run it, I cannot help you. First; we need to figure out how to start Powershell scripts from C#. Hit teh interwebs and the Googlie, and you may find jpmik's post: http://www.codeproject.com/Articles/18229/How-to-run-PowerShell-scripts-from-C. (Or MS' official answer at http://msdn.microsoft.com/en-us/library/ee706563(v=vs.85).aspx) public string RunPowershell(string powershellText, SPWeb web, string param1, string param2) { // Powershell ~= RunspaceFactory - i.e. Create a powershell context var runspace = RunspaceFactory.CreateRunspace(); var resultString = new StringBuilder(); try { // load the SharePoint snapin - Note: you cannot do this in the script itself (i.e. add-pssnapin etc does not work) PSSnapInException snapInError; runspace.RunspaceConfiguration.AddPSSnapIn("Microsoft.SharePoint.PowerShell", out snapInError); runspace.Open(); // set a web variable. runspace.SessionStateProxy.SetVariable("webContext", web); // and some user defined parameters runspace.SessionStateProxy.SetVariable("param1", param1); runspace.SessionStateProxy.SetVariable("param2", param2); var pipeline = runspace.CreatePipeline(); pipeline.Commands.AddScript(powershellText); // add a "return" variable pipeline.Commands.Add("Out-String"); // execute! var results = pipeline.Invoke(); // convert the script result into a single string foreach (PSObject obj in results) { resultString.AppendLine(obj.ToString()); } } finally { // close the runspace runspace.Close(); } // consider logging the result. Or something. return resultString.ToString(); } Ok. We've written some code. Let us test it. var runner = new PowershellRunner(); runner.RunPowershellScript(@" $web = Get-SPWeb 'http://server/web' # or $webContext $web.Title = $param1 $web.Update() $web.Dispose() ", null, "New title", "not used"); Next step: Connect the code to the list, or more specifically, have the code execute on one (or several) list items. As there are more options than readers, I'll leave this as an exercise for the reader. Some alternatives: Create a ribbon button that calls RunPowershell with the body of the selected itemsAdd a layout pageSpecify list item from query string (possibly coupled with content editor webpart with html that links directly to this page with querystring)WebpartListing with an "execute" columnList with multiselect and an execute button Etc!Now that you have the code for executing powershell scripts, you can easily expand this into a timer job, which executes scripts at regular intervals. But if the previous solution was dangerous, this is even worse - the scripts will usually be run with one of the admin accounts, and can do pretty much anything...One more thing... Note that as this is running "consoleless" calls to Write-Host will fail. Two solutions; remove all output, or check if the script is run in a console-window or not.  if ($host.Name -eq "ConsoleHost") { Write-Host 'If I agreed with you we'd both be wrong' }

  Read the article

• PowerShell Script To Find Where SharePoint 2007 Features Are Activated

  - by Brian T. Jackett

  Recently I posted a script to find where SharePoint 2010 Features Are Activated.  I built the original version to use SharePoint 2010 PowerShell commandlets as that saved me a number of steps for filtering and gathering features at each level.  If there was ever demand for a 2007 version I could modify the script to handle that by using the object model instead of commandlets.  Just the other week a fellow SharePoint PFE Jason Gallicchio had a customer asking about a version for SharePoint 2007.  With a little bit of work I was able to convert the script to work against SharePoint 2007.   Solution    Below is the converted script that works against a SharePoint 2007 farm.  Note: There appears to be a bug with the 2007 version that does not give accurate results against a SharePoint 2010 farm.  I ran the 2007 version against a 2010 farm and got fewer results than my 2010 version of the script.  Discussing with some fellow PFEs I think the discrepancy may be due to sandboxed features, a new concept in SharePoint 2010.  I have not had enough time to test or confirm.  For the time being only use the 2007 version script against SharePoint 2007 farms and the 2010 version against SharePoint 2010 farms.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first. 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(     [Parameter(position = 1, valueFromPipeline=$true)]     [string]     $Identity )#end param     Begin     {         # load SharePoint assembly to access object model         [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")             # declare empty array to hold results. Will add custom member for Url to show where activated at on objects returned from Get-SPFeature.         $results = @()                 $params = @{}     }     Process     {         if([string]::IsNullOrEmpty($Identity) -eq $false)         {             $params = @{Identity = $Identity}         }                 # create hashtable of farm features to lookup definition ids later         $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local                         # check farm features         $results += ($farm.FeatureDefinitions | Where-Object {$_.Scope -eq "Farm"} | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value ([string]::Empty) -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                 # check web application features         $contentWebAppServices = $farm.services | ? {$_.typename -like "Windows SharePoint Services Web Application"}                 foreach($webApp in $contentWebAppServices.WebApplications)         {             $results += ($webApp.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $webApp.GetResponseUri(0).AbsoluteUri -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                         # check site collection features in current web app             foreach($site in ($webApp.Sites))             {                 $results += ($site.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                  % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $site.Url -PassThru} |                                  Select-Object -Property Scope, DisplayName, Id, Url)                                 # check site features in current site collection                 foreach($web in ($site.AllWebs))                 {                     $results += ($web.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                      % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $web.Url -PassThru} |                                      Select-Object -Property Scope, DisplayName, Id, Url)                                                        $web.Dispose()                 }                 $site.Dispose()             }         }     }     End     {         $results     } } #end Get-SPFeatureActivated Get-SPFeatureActivated   Conclusion    I have posted this script to the TechNet Script Repository (click here).  As always I appreciate any feedback on scripts.  If anyone is motivated to run this 2007 version script against a SharePoint 2010 to see if they find any differences in number of features reported versus what they get with the 2010 version script I’d love to hear from you.         -Frog Out

  Read the article

< Previous Page | 224 225 226 227 228 229 230 231 232 233 234 235  | Next Page >