Search Results

Search found 16560 results on 663 pages for 'far'.

Page 229/663 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >

  • Cannot use second display with 12.04 and Intel 2000/3000

    - by Carolyn Marenger
    I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

    Read the article

  • Issue with https:// url going to an unknown location

    - by Brandon
    We have a website (ASP.NET/Plesk 9.5.5) that can be accessed just fine through the regular URL (http://example.com). However when accessing the site through https://example.com the site displays the invalid security certificate warning, which is fine since we don't have an SSL certificate. If I add an exception, I'm sent to a completely separate site that is apparently hosting a malware script (I'm still on https://example.com though). Because of this Google has flagged the site as dangerous. I can't find anything in the Plesk panel that would help fix this, and as far as I can tell those files don't exist on our server. How do I tell where the https:// link is sending me? I'm not that familiar with DNS, but is that what is causing this behavior?

    Read the article

  • Disadvantages of enabling AHCI after Win7 install

    - by Mario De Schaepmeester
    I've formatted my notebook that has a 5400RPM HDD with ~500GB capacity. After installing Windows 7 and about half the drivers (including chipset) I began to doubt whether to go for IDE or AHCI mode for my hard drive. There used to be a lot of discussion on the internet which is better and so far I understood it was particularly helpful on SSDs. Now the general consensus seems to be that AHCI mode is best for most hard drives. I have thus enabled AHCI in the middle of configuring my notebook (rest of the drivers, necessary software etc...) Two questions: considering my HDD's spec above, should I leave it on? Is there any disadvantage of enabling it after Windows 7 and chipset drivers installation? Windows 7 version is 64 bit Home Premium.

    Read the article

  • Is it better to specialize in a single field I like, or expand into other fields to broaden my horizons?

    - by Oak
    This is a dilemma about which I have been thinking for quite a while. I'm a graduate student and my topics of interest are programming language design, code analysis, compilation, etc. So far, this field has been very interesting and rewarding for me, so I was thinking about finding a job in that field and continuing to specialize in it. I feel like it's a relatively solid field which won't "get out of style" anytime soon. I've always thought that in such complex fields it's better to be a real expert than just another guy who superficially understand what the experts are talking about. On the other hand, I feel that by specializing this way I really limit my future option. I have always been a strong believer in multidisciplinary approaches to problems. Maybe I should go search for a general programming job in which I could gain experience in other fields, as well as occasionally apply my favorite field for solving problems. Specializing in only one or two fields can prevent me from thinking outside the box and cause stagnation. I would really like to hear more opinions about this choice. The truth is I'm already leaning towards one of the choices, so basic psychology says nothing will change my mind, but I would still love to hear some feedback.

    Read the article

  • New site not appearing in index after change of address, no feedback from google webmaster tools

    - by Duffy
    Our change of address seems to not be taking effect. Here's the story so far: We're a web company and our product is called The New Hive. Our site used to be at thenewhive.com, but we decided to switch to newhive.com (drop the "the", it's cleaner). So the timeline of what I've tried, starting on July 29th: used 301 redirects for all pages (e.g. thenewhive.com/tag/art = newhive.com/tag/art) At this point we noticed that we had disappeared from search results when searching "The New Hive", the front page used to be all links to our site plus a couple news articles about the company. So on August 5th I: verified new domain in webmaster tools (old domain was already verified) submitted a change of address request on August 5th with Webmaster Tools / Configuration / Change of Address Then after another week, on August 13th I did this: Went to Webmaster Tools / Health / Fetch as google fetched our homepage and a couple sub pages, all successfully clicked "Submit to Index" for homepage As of today (August 23rd) we're still not showing up in the index. We're getting no warnings or feedback of any kind from the dashboard so I'm inclined to think something's broken with the dashboard rather than that something's wrong with our site from an SEO perspective. From the dashboard: No new messages or recent critical issues. Crawl Errors: No data available. From Health - Index Status: Total indexed 0 Ever crawled 42,490 Not selected 12 Blocked by robots 0 I'm really at a loss here, any help would be appreciated.

    Read the article

  • MQTT, GWT, ActiveMQ stack to bring jms to the browser

    - by scphantm
    I am in the preliminary stages of architecting a legacy replacement project. They already have sub half second performance on their green screens and they want the same on their web app. We have a 390 mainframe that can handle anything we throw at it but they don't have a good jvm for it, so we have two tiers of websphere servers between the mainframe and the browser, The ui server, and the bl server. For the ui, I'm leaning towards GWT. But one thing that I think would seal the deal is to add messaging capabilities to the browser. The idea is say you click on a link that displays a second panel of information, instead of the classic GWT where it triggers a GWT-RPC call to the ui server, the ui server routs it to the bl server, the bl sends it to the mainframe and back out, it drops an MQTT message directly to the bl server or directly to the mainframe. Say writes go to the bl, reads go to the mainframe. This is an easy enough thing in classic jms because you can issue a message that has an expected response. Then have your callback ready to get the resonse. But from what I'm reading so far. It looks like mqtt doesn't have that. It looks like it's strictly fire and forget, which would make it really tough to come up with a way to get a response back to the workstation that called it. Am I right here? Has anyone tried this stack before with gwt.

    Read the article

  • Any advantage to the script version of Google Adwords' conversion tracking code?

    - by ripper234
    Google Adword has an HTML snippet to track conversions: <script type="text/javascript"> /* <![CDATA[ */ var google_conversion_id = 12345; var google_conversion_language = "en"; var google_conversion_format = "3"; var google_conversion_color = "ffffff"; var google_conversion_label = "someopaqueid"; var google_conversion_value = 0; /* ]]> */ </script> <script type="text/javascript" src="http://www.googleadservices.com/pagead/conversion.js"> </script> <noscript> <div style="display:inline;"> <img height="1" width="1" style="border-style:none;" alt="" src="http://www.googleadservices.com/pagead/conversion/12345/?label=opaque&amp;guid=ON&amp;script=0"/> </div> </noscript> It is composed of two parts: For clients supporting javascript, an inline script that sets variables, plus loading a reporting script. For other clients, an image tag. As far as I can see, the image tag has some advantages: It works on all browsers. It is asynchronous. It's shorter to have only this version, compared to both this and the js version. Any reason not to drop the <noscript> tag and just use the image conversion snippet directly?

    Read the article

  • how to properly implement alpha blending in a complex 3d scene

    - by Gajet
    I know this question might sound a bit easy to answer but It's driving me crazy. There are too many possible situations that a good alpha blending mechanism should handle, and for each Algorithm I can think of there is something missing. these are the methods I've though about so far: first of I though about object sorting by depth, this one simply fails because Objects are not simple shapes, they might have curves and might loop inside each other. so I can't always tell which one is closer to camera. then I thought about sorting triangles but this one also might fail, thought I'm not sure how to implement it there is a rare case that might again cause problem, in which two triangle pass through each other. again no one can tell which one is nearer. the next thing was using depth buffer, at least the main reason we have depth buffer is because of the problems with sorting that I mentioned but now we get another problem. Since objects might be transparent, in a single pixel there might be more than one object visible. So for which Object should I store pixel depth? I then thought maybe I can only store the most front Object depth, and using that determine how should I blend next draw calls at that pixel. But again there was a problem, think about 2 semi transparent planes with a solid plane in middle of them. I was going to render the solid plane at the end, one can see the most distant plane. note that I was going to merge every two planes until there is only one color left for that pixel. Obviously I can use sorting methods too because of the same reasons I've explained above. Finally the only thing I imagine being able to work is to render all objects into different render targets and then sort those layers and display the final output. But this time I don't know how can I implement this algorithm.

    Read the article

  • Is it possible to make Ctrl+C as responsive as Ctrl+Break in the Windows 7 console?

    - by Peter Graham
    Is it possible to make Ctrl+C act like Ctrl+Break in the Windows 7 cmd.exe console? By default Ctrl+C seems to only send a signal the next time the input buffer is read, where Ctrl+Break sends a signal immediately. This makes Ctrl+C useless for ending processes because when I want to end a process I want to end it immediately. I'm using Ctrl+Break for now but it's far harder to type. It looks like in DOS you can add BREAK=ON to CONFIG.SYS to achieve this, but not in Windows 7?

    Read the article

  • Create a bootable .wim from Win 7 system image?

    - by Christian Nikkanen
    I was given an assigment to create a clean install of Windows 7, take a system image of it and make it a bootable image, so it can be booted from our local server. I've readed a few tutorials, but only one worked so far that it created a .wim . But when I transferred it to the server (Windows 2008 Server), navigated to Boot Images -- Add a new boot image But it says it's not bootable. So how would I create a .wim that is good for the server from a 64bit Windows? I have Windows AIK installed.

    Read the article

  • Gitolite and Gitlab - How the `www-data` user can checkout?

    - by mblaettermann
    I have just installed Gitolite and Gitlab and I am very happy with it. Everything works fine so far. I can create repos, push to them, clone them on other clients on the network. Great! But now I wanted to do some post-receive hooks. I.e. when I push to some repo, this repo should be checked out on the server in the /var/www/repos directory. I did this with Gitlabs Deploy Hooks and this Endpoint-Script. The problem is that the scripts are run under the user "www-data" which has no access to gitlab/gitolite. How do I change this? I need to be able to checkout repos with www-data user and using git@server/repo.git syntax.

    Read the article

  • How to Set "<options>" in fstab - Manual Mounting is Successfull

    - by nicorellius
    I am not real familiar with fstab yet, so I have a couple questions. When I use this command to mount devices: sudo mount -t cifs -o username=admin //192.168.1.134/share_name /mnt/share_name With passwords: sudo="local user password" password="password for device" How do I translate that into an fstab entry? So far, I have tried this in the fstab and mounting fails: //192.168.1.134/share_name /mnt/share_name cifs default 0 0 This is where the question comes in. Where I have default, should there be something instead, indicating username=admin, etc?

    Read the article

  • Jumbo Frames on DIR-655

    - by Spookyone
    Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

    Read the article

  • When module calling gets ugly

    - by Pete
    Has this ever happened to you? You've got a suite of well designed, single-responsibility modules, covered by unit tests. In any higher-level function you code, you are (95% of the code) simply taking output from one module and passing it as input to the next. Then, you notice this higher-level function has turned into a 100+ line script with multiple responsibilities. Here is the problem. It is difficult (impossible) to test that script. At least, it seems so. Do you agree? In my current project, all of the bugs came from this script. Further detail: each script represents a unique solution, or algorithm, formed by using different modules in different ways. Question: how can you remedy this situation? Knee-jerk answer: break the script up into single-responsibility modules. Comment on knee-jerk answer: it already is! Best answer I can come up with so far: create higher-level connector objects which "wire" modules together in particular ways (take output from one module, feed it as input to another module). Thus if our script was: FooInput fooIn = new FooInput(1, 2); FooOutput fooOutput = fooModule(fooIn); Double runtimevalue = getsomething(fooOutput.whatever); BarInput barIn = new BarInput( runtimevalue, fooOutput.someOtherValue); BarOutput barOut = barModule(BarIn); It would become with a connector: FooBarConnectionAlgo fooBarConnector = new fooBarConnector(fooModule, barModule); FooInput fooIn = new FooInput(1, 2); BarOutput barOut = fooBarConnector(fooIn); So the advantage is, besides hiding some code and making things clearer, we can test FooBarConnectionAlgo. I'm sure this situation comes up a lot. What do you do?

    Read the article

  • Lync Server 2010 with Hosted VoIP PBX

    - by kmehta
    We just deployed Lync Server 2010 in our organization and it is working great so far. The next step for us is to enable enterprise voice so that we can replace our telephones with service that is handled 100% by Lync. This is where I am at a loss. I have a fully deployed Standard Edition Lync server and a hosted VoIP PBX provider with VoIP handsets. I would like to get rid of the handsets and have my company's phone service be handled by Lync client (e.g. someone calls my work number, and Lync rings instead of my old handset that is set up with the PBX) I am new to deploying these types of features. Any help is appreciated. Thanks.

    Read the article

  • Thinkpad W510 with default graphics drivers shows weird brightness issues

    - by Chantz
    Hey guys, I am currently running 10.10 - 32 bit on a new Thinkpad W510 with nVidia Quadro FX 880M graphics card. I am running with the default graphics drivers that installed with ubuntu install. My problem is that when I am logging in the screen acts normally as far as birghtness is concerned. I can increase/decrease brightness with Fn keys. But few seconds after I log in screen goes pitch dark. Hitting Fn+Home flickers the screen to all the way bright, then all the way dark. This behavior continues until I reach maximum brightness, in which case the screen stays all the way bright, for a few more seconds and then again goes dark if there is no activity & the cycle continues. Have you guys faced any of these issues? If so any pointers on how to resolve it. I am not alone, on ubuntu forum I saw another person having the same issue - link but no solution. Please help! UPDATE I followed the instructions that htorque mentions in his answer and it worked.

    Read the article

  • Compiling custom kernel 3.7.x lowlatency on Ubuntu 12.04

    - by FlabbergastedPickle
    All, I have a peculiar problem with trying to compile a lowlatency flavor of the latest 3.7 kernel. I retrieved the prepatched source from the launchpad using bzr, compiled it using the usual make-kpkg using the current config file plus default options for the rest, installed the kernel and booted into it. Everything works except for the fglrx and wl drivers that I had to install in the original 12.04 lowlatency kernel. So, I tried recompiling these and succeeded with both of them (no errors were reported)--wl driver required a minor adjustment to system.h include while latest fglrx 12.11 beta11 (released yesterday, Dec. 3rd, 2012) compiled without the hitch. Yet, when I try to modprobe either module (both having in common the fact that they were built after the kernel, fglrx as a deb, and wl via the usual make/make install), I get "FATAL: no MODULENAME module found" (MODULENAME being either wl or fglrx). The graphic driver watermark shows 3D crossed out and "for testing purposes" (or "unsupported hardware," can't remember), and no fglrx or wl is loaded. More mysteriously, dmesg shows no attempt on kernel's behalf to load the said drivers, even though they are clearly in the right /lib/modules/KERNEL_VERSION folder. How is this possible? Has something fundamentally changed in 3.7 kernel that would prevent modprobing of these? I know that there is driver signing option that was merged recently but as far as I could tell the kernel config file generated by the build process had that disabled. OTOH, while building wl driver, I did get a warning that the driver was not signed... Then again, even if the kernel disallowed loading of those modules, shouldn't dmesg reflect that? Any thoughts on this one are most appreciated.

    Read the article

  • Real-Time chat translation on mac using either Skype, Adium or iChat

    - by Cawas
    If you're looking for MSN and / or Windows, just go here. I'm looking for Real-Time chat translation tools for Mac, and preferably using Adium, but it could be for Skype, iChat or maybe another option if it's really good. So far I could only easily find a plugin for Adium, simply called translator, that uses google, dicts and babelfish, but you have to type commands in and paste the words or sentences, and it's currently not even working on Snow Leopard. Even if it did, it's still not quite as automatic as we'd expect (or see in other platforms as indicated). So I'm just citing it as an example of a bad solution.

    Read the article

  • OpenGL lighting with dynamic geometry

    - by Tank
    I'm currently thinking hard about how to implement lighting in my game. The geometry is quite dynamic (fixed 3D grid with custom geometry in each cell) and needs some light to get more depth and in general look nicer. A scene in my game always contains sunlight and local light sources like lamps (point lights). One can move underground, so sunlight must be able to illuminate as far as it can get. Here's a render of a typical situation: The lamp is positioned behind the wall to the top, and in the hollow cube there's a hole in the back, so that light can shine through. (I don't want soft shadows, this is just for illustration) While spending the whole day searching through Google, I stumbled on some keywords like deferred rendering, forward rendering, ambient occlusion, screen space ambient occlusion etc. Some articles/tutorials even refer to "normal shading", but to be honest I don't really have an idea to even do simple shading. OpenGL of course has a fixed lighting pipeline with 8 possible light sources. However they just illuminate all vertices without checking for occluding geometry. I'd be very thankful if someone could give me some pointers into the right direction. I don't need complete solutions or similar, just good sources with information understandable for someone with nearly no lighting experience (preferably with OpenGL).

    Read the article

  • Ubuntu Server 11.10 boot, white terminal with garbled black text

    - by SpeedCrazy
    I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

    Read the article

  • How to integrate monit into web app deployment process

    - by shabunc
    I have: Tomcat with webapp deployed via mvn tomcat:redeploy. Monit, pinging the host and restarting server if ping failed. The thing is there in a moment during the redeployment when ping will fail - and this is normal, actually. So, the question is - what is the best way to teach monit to consider the fact of redeployment and not to confuse it with "real" black outs. This is of course an issue of balance between elegance, ease of implementation and scalability. The most straightforward solution I can think of - is just to shutdown monit before deployment and start it up after once again. But this if far from elegance I guess.

    Read the article

  • No recent docs listed in Office 2007 on Windows XP Pro

    - by user58094
    Hi, I have Office 2007 installed on a laptop running Windows XP Pro. When I go to open a file in Excel or Word, there is no list of recent documents. On the Options/Advanced page, the "show this number of recent documents" spinner displays 0 but is grayed out so I can't change it. The help page it directs me to describes how to disable the list, but not how to enable it. In Word, it says something about the list being disallowed by Group Policy, but I am not part of any workgroup and, as far as I know, the policies are all uninitialized, so it should be allowed by default. There are recent files listed in MRU keys in the registry. A similar question has been answered, but I believe that only applies to Windows Vista or 7 because the folder mentioned doesn't exist on my system. Instead, the folder "%APPDATA%\Microsoft\Office\Recent" contains shortcuts to recent docs for both Excel and Word. Any other ideas? Thanks.

    Read the article

  • How can I read a reel-to-reel tape from the 1970s?

    - by Joe Wreschnig
    A close friend of my mother worked at DEC in the 1970s and 1980s. She recently passed away, and in sorting through her estate, my mother discovered some reel-to-reel magnetic tape. We are curious about what might be on it. I haven't yet seen a picture of it, but Wikipedia tells me this is most likely DECtape. Is there any chance the data on it is still good? It was not preserved with great care, but as far as we know it has also never been particularly abused. Just left in a box and moved a few times. If the data is still valid, do we need to dig up a PDP or VAX or read it, or is there a more modern option?

    Read the article

  • What are `Developmental Milestones` for programming skills?

    - by Holmes
    I studied in the field of Computer Science for 6 years, bachelor's degree and master's degree. I have studied all the basic programming like C, Java, VB, C#, Python, and etc. When I have free times, I will learn new programming languages and follow new programming trends by myself , such as PHP, HTML5, CSS5, LESS, Bootstrap, Symfony2, and GitHub. So, if someone wants me to write some instructions using these languages, I'm certain that I can do it, not so good but I can get a job done. However, I don't have any favorite programming language. Moreover, I also have studied about algorithms, database, and etc. Everything I just wrote so far seems that I know a lot in this field. In fact, I feel I am very stupid. I cannot answer 80% of the questions on SO. In spite of those languages??, I have studied. Perhaps it is because I have never worked before. As there is the Developmental Milestones for children, which refers to how a child becomes able to do more complex things as they get older, I would like to evaluate the same thing but for programming skills. What are the set of functional skills or age-specific tasks that most programmers can do at a certain age range? In order to evaluate myself, I would like to ask your opinions that all of the skills I mentioned above, are they enough for programmers to know when they are 25 years old? What are your suggestions in order to improve the skills in this field?

    Read the article

  • Import virtualBox appliance to KVM

    - by Hugo Bulnes
    Im new using KVM as a virtualization solution. Currently I'm using VirtualBox to manage my virtual machines in my personal computer, but I'm moving my virtualization to a Server, so I set up a Linux server with KVM. And now I'm trying to import a virtualBox vm to KVM. So far I couldn't make it work. I already convert the ova file from VirtualBox to a format more familiar to KVM (qcow2), and I try to create a new virtual machine using virt-install command and setting the new virtual machine hard drive with the .qcow2 file. There is anyone could help me? thank you!

    Read the article

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236  | Next Page >