volume shadow copy - Page 229

Have suggestions for these assembly mnemonics?

- by Noctis Skytower

Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

Read the article

Are their any suggestions for this new assembly language?

- by Noctis Skytower

Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

Read the article

Are there any suggestions for these new assembly mnemonics?

- by Noctis Skytower

Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

Read the article

VBA nested Loop flow control

- by PCGIZMO

I will be brief and stick to what I know. This code for the most part works as it should. The only issue is in the iteration of the x and z loop. these to loops should set the range and yLABEL for the Y loop. I can get through a set and come up with the correct range after that things go bonkers. I know some of it has to do with not breaking out of x to set z and then back to x update the range. It should work z is found then x. the range between them is set for y. then next x but y stays then rang between y and x is set for y.. so on and so forth kinda like a slinky down the stairs. or a slide rule depending on how I set the loops either way I end up all over the place after a couple iterations. I have done a few things but each time I break out of x to set z , X restarts at the top of the range. At least that's what I think I am seeing. In the example sheet i have since changed the way the way the offset works with the loop but the idea is still the same. I have goto statements at this time i was going to try figuring out conditional switches after the loops were working. Any help direction or advice is appreciated. Option Explicit Sub parse() Application.DisplayAlerts = False 'Application.EnableCancelKey = xlDisabled Dim strPath As String, strPathused As String strPath = "C:\clerk plan2" Dim objfso As FileSystemObject, objFolder As Folder, objfile As Object Set objfso = CreateObject("Scripting.FileSystemObject") Set objFolder = objfso.GetFolder(strPath) 'Loop through objWorkBooks For Each objfile In objFolder.Files If objfso.GetExtensionName(objfile.Path) = "xlsx" Then Dim objWorkbook As Workbook Set objWorkbook = Workbooks.Open(objfile.Path) ' Set path for move to at end of script strPathused = "C:\prodplan\used\" & objWorkbook.Name objWorkbook.Worksheets("inbound transfer sheet").Activate objWorkbook.Worksheets("inbound transfer sheet").Cells.UnMerge 'Range management WB Dim SRCwb As Worksheet, SRCrange1 As Range, SRCrange2 As Range, lastrow As Range Set SRCwb = objWorkbook.Worksheets("inbound transfer sheet") Set SRCrange1 = SRCwb.Range("g3:g150") Set SRCrange2 = SRCwb.Range("a1:a150") Dim DSTws As Worksheet Set DSTws = Workbooks("clerkplan2.xlsm").Worksheets("transfer") Dim STR1 As String, STR2 As String, xVAL As String, zVAL As String, xSTR As String, zSTR As String STR1 = "INBOUND TRANS" STR2 = "INBOUND CA TRANS" Dim x As Variant, z As Variant, y As Variant, zxRANGE As Range For Each z In SRCrange2 zSTR = Mid(z, 1, 16) If zSTR <> STR2 Then GoTo zNEXT If zSTR = STR2 Then zVAL = z End If For Each x In SRCrange2 xSTR = Mid(x, 1, 13) If xSTR <> STR1 Then GoTo xNEXT If xSTR = STR1 Then xVAL = x End If Dim yLABEL As String If xVAL = x And zVAL = z Then If x.Row > z.Row Then Set zxRANGE = SRCwb.Range(x.Offset(1, 0).Address & " : " & z.Offset(-1, 0).Address) yLABEL = z.Value Else Set zxRANGE = SRCwb.Range(z.Offset(-1, 0).Address & " : " & x.Offset(1, 0).Address) yLABEL = x.Value End If End If MsgBox zxRANGE.Address ' DEBUG For Each y In zxRANGE If y.Offset(0, 6) = "Temp" Or y.Offset(0, 14) = "Begin Time" Or y.Offset(0, 15) = "End Time" Or _ Len(y.Offset(0, 6)) = 0 Or Len(y.Offset(0, 14)) = 0 Or Len(y.Offset(0, 15)) = "0" Then yNEXT Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("c" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) y.Offset(0, 6).Copy lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False DSTws.Activate ActiveCell.Offset(0, -1) = objWorkbook.Name ActiveCell.Offset(0, -2) = yLABEL objWorkbook.Activate y.Offset(0, 14).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("d" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False objWorkbook.Activate y.Offset(0, 15).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("e" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False yNEXT: Next y xNEXT: Next x zNEXT: Next z strPathused = "C:\clerk plan2\used\" & objWorkbook.Name objWorkbook.Close False 'Move proccesed file to new Dir Dim OldFilePath As String Dim NewFilePath As String OldFilePath = objfile 'original file location NewFilePath = strPathused ' new file location Name OldFilePath As NewFilePath ' move the file End If Next End Sub

Read the article

Problem with reading file line-by-line

- by Maulrus

I'm trying to complete an exercise to write a program that takes the following command line arguments: an input file, an output file, and an unspecified number of words. The program is to read the contents of the input file line by line, find for each word given which lines contain the word, and print the lines with their line number to the output file. Here's my code: #include <iostream> #include <fstream> #include <string> #include <sstream> using namespace std; int main(int argc, char* argv[]) { if (argc < 4) { cerr << "Error #1: not enough arguments provided\n"; return 1; } ifstream in(argv[1]); if (!in.is_open()) { cerr << "Error #2: input file could not be opened\n"; return 2; } ofstream out(argv[2]); if (!out.is_open()) { cerr << "Error #3: output file could not be opened\n"; return 3; } ostringstream oss; for (int i = 3; i < argc; ++i) { int k = 0; string temp; oss << argv[i] << ":\n\n"; while (getline(in, temp)) { ++k; unsigned x = temp.find(argv[i]); if (x != string::npos) oss << "Line #" << k << ": " << temp << endl; } } string copy = oss.str(); out << copy; in.close(); out.close(); return 0; } If I try to run that, I get the predicted output for the first word given, but any words following it aren't found. For example, for the source code above will give the following output: in: Line #1: #include <iostream> Line #2: #include <fstream> Line #3: #include <string> Line #4: #include <sstream> Line #5: using namespace std; Line #7: int main(int argc, char* argv[]) { Line #12: ifstream in(argv[1]); Line #13: if (!in.is_open()) { Line #14: cerr << "Error #2: input file could not be opened\n"; Line #22: ostringstream oss; Line #23: string temp; Line #24: for (int i = 3; i < argc; ++i) { Line #26: int k = 0; Line #28: while (getline(in, temp)) { Line #30: unsigned x = temp.find(argv[i]); Line #31: if (x != string::npos) Line #32: oss << "Line #" << k << ": " << temp << endl; Line #35: string copy = oss.str(); Line #37: in.close(); out: That is, it'll find all the instances of the first word given but not any following. What am I doing wrong here?

Read the article

Covariance and Contravariance in C#

- by edalorzo

I will start by saying that I am Java developer learning to program in C#. As such I do comparisons of what I know with what I am learning. I have been playing with C# generics for a few hours now, and I have been able to reproduce the same things I know in Java in C#, with the exception of a couple of examples using covariance and contravariance. The book I am reading is not very good in the subject. I will certainly seek more info on the web, but while I do that, perhaps you can help me find a C# implementation for the following Java code. An example is worth a thousand words, and I was hoping that by looking a good code sample I will be able to assimilate this more rapidly. Covariance In Java I can do something like this: public static double sum(List<? extends Number> numbers) { double summation = 0.0; for(Number number : numbers){ summation += number.doubleValue(); } return summation; } I can use this code as follows: List<Integer> myInts = asList(1,2,3,4,5); List<Double> myDoubles = asList(3.14, 5.5, 78.9); List<Long> myLongs = asList(1L, 2L, 3L); double result = 0.0; result = sum(myInts); result = sum(myDoubles) result = sum(myLongs); Now I did discover that C# supports covariance/contravariance only on interfaces and as long as they have been explicitly declared to do so (out). I think I was not able to reproduce this case, because I could not find a common ancestor of all numbers, but I believe that I could have used IEnumerable to implement such thing if a common ancestor exists. Since IEnumerable is a covariant type. Right? Any thoughts on how to implement the list above? Just point me into the right direction. Is there any common ancestor of all numeric types? Contravariance The contravariance example I tried was the following. In Java I can do this to copy one list into another. public static void copy(List<? extends Number> source, List<? super Number> destiny){ for(Number number : source) { destiny.add(number); } } Then I could use it with contravariant types as follows: List<Object> anything = new ArrayList<Object>(); List<Integer> myInts = asList(1,2,3,4,5); copy(myInts, anything); My basic problem, trying to implement this in C# is that I could not find an interface that was both covariant and contravariant at the same time, as it is case of List in my example above. Maybe it can be done with two different interface in C#. Any thoughts on how to implement this? Thank you very much to everyone for any answers you can contribute. I am pretty sure I will learn a lot from any example you can provide.

Read the article

Image Resizing: Poor jpeg quality and black PNG backgrounds

- by azz0r

Hello, I have two issues with my class, basically the quality of the jpeg images is quite poor, but I'm not sure if thats down to my ratio resizing. Ideally I'd like this class to be strict with image sizes and crop into them, but I cant get my head around it. My main issue is that pngs always have a black bg, does anyone have experience with this happening? <?php class OpenSource_ImageResize { function __construct($theFile, $toWhere, $mime, $extension, $newWidth, $newHeight) { if ($mime == NULL) { $mime = getimagesize($theFile); $mime = $mime['mime']; } if ($mime == 'image/jpeg') { $size = getimagesize($theFile); if ($size[0] > $newWidth || $size[1] > $newHeight) { $sourceImage = imagecreatefromjpeg($theFile); } else { return copy($theFile, $toWhere); throw new exception('Could not create jpeg'); return false; } } else if ($mime == 'image/png') { $size = getimagesize($theFile); if ($size[0] > $newWidth || $size[1] > $newHeight) { $sourceImage = imagecreatefrompng($theFile); } else { return copy($theFile, $toWhere); //throw new exception('Could not create png'); return false; } } else if ($mime == 'image/gif') { $size = getimagesize($theFile); if ($size[0] > $newWidth || $size[1] > $newHeight) { $sourceImage = imagecreatefromgif ($theFile); } else { return copy($theFile, $toWhere); //throw new exception('Could not create gif'); return false; } } else { throw new exception('Not a valid mime type'); return false; } $oldX = imageSX($sourceImage); $oldY = imageSY($sourceImage); if ($newWidth == NULL) { $thumbHeight = $newHeight; $thumbWidth = round($newHeight/($oldY/$oldX)); } else if ($oldX > $oldY) { $thumbWidth = $newWidth; $thumbHeight = $oldY * ($newHeight/$oldX); } if ($oldX < $oldY) { $thumbWidth = round($newHeight/($oldY/$oldX)); $thumbHeight = $newHeight; } if ($oldX == $oldY) { $thumbWidth = $newWidth; $thumbHeight = $newHeight; } if (!gd_info()) { $dstImage = ImageCreate($thumbWidth, $thumbHeight); imagecopyresized($dstImage, $sourceImage, 0, 0, 0, 0, $thumbWidth, $thumbHeight, $oldX, $oldY); } else { $dstImage = ImageCreateTrueColor($thumbWidth, $thumbHeight); imagecopyresampled($dstImage, $sourceImage, 0, 0, 0, 0, $thumbWidth, $thumbHeight, $oldX, $oldY); } if ($mime == 'image/png') { $xparent = imagecolorresolvealpha($dstImage, 255,2,240, 0) ; imagecolortransparent($dstImage,$xparent); imagealphablending($dstImage,true); imagepng($dstImage, $toWhere); } else if ($mime == 'image/jpeg') { imagejpeg($dstImage, $toWhere); } else if ($mime == 'image/gif') { imagegif ($dstImage, $toWhere); } imagedestroy($dstImage); imagedestroy($sourceImage); return true; } }

Read the article

Do you have suggestions for these assembly mnemonics?

- by Noctis Skytower

Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! Stack Manipulation (IMP: [Space]) Stack manipulation is one of the more common operations, hence the shortness of the IMP [Space]. There are four stack instructions. hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item Arithmetic (IMP: [Tab][Space]) Arithmetic commands operate on the top two items on the stack, and replace them with the result of the operation. The first item pushed is considered to be left of the operator. add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo Heap Access (IMP: [Tab][Tab]) Heap access commands look at the stack to find the address of items to be stored or retrieved. To store an item, push the address then the value and run the store command. To retrieve an item, push the address and run the retrieve command, which will place the value stored in the location at the top of the stack. save Store load Retrieve Flow Control (IMP: [LF]) Flow control operations are also common. Subroutines are marked by labels, as well as the targets of conditional and unconditional jumps, by which loops can be implemented. Programs must be ended by means of [LF][LF][LF] so that the interpreter can exit cleanly. L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller halt End the program I/O (IMP: [Tab][LF]) Finally, we need to be able to interact with the user. There are IO instructions for reading and writing numbers and individual characters. With these, string manipulation routines can be written. The read instructions take the heap address in which to store the result from the top of the stack. print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

Read the article

bubble sort on array of c structures not sorting properly

- by xmpirate

I have the following program for books record and I want to sort the records on name of book. the code isn't showing any error but it's not sorting all the records. #include "stdio.h" #include "string.h" #define SIZE 5 struct books{ //define struct char name[100],author[100]; int year,copies; }; struct books book1[SIZE],book2[SIZE],*pointer; //define struct vars void sort(struct books *,int); //define sort func main() { int i; char c; for(i=0;i<SIZE;i++) //scanning values { gets(book1[i].name); gets(book1[i].author); scanf("%d%d",&book1[i].year,&book1[i].copies); while((c = getchar()) != '\n' && c != EOF); } pointer=book1; sort(pointer,SIZE); //sort call i=0; //printing values while(i<SIZE) { printf("##########################################################################\n"); printf("Book: %s\nAuthor: %s\nYear of Publication: %d\nNo of Copies: %d\n",book1[i].name,book1[i].author,book1[i].year,book1[i].copies); printf("##########################################################################\n"); i++; } } void sort(struct books *pointer,int n) { int i,j,sorted=0; struct books temp; for(i=0;(i<n-1)&&(sorted==0);i++) //bubble sort on the book name { sorted=1; for(j=0;j<n-i-1;j++) { if(strcmp((*pointer).name,(*(pointer+1)).name)>0) { //copy to temp val strcpy(temp.name,(*pointer).name); strcpy(temp.author,(*pointer).author); temp.year=(*pointer).year; temp.copies=(*pointer).copies; //copy next val strcpy((*pointer).name,(*(pointer+1)).name); strcpy((*pointer).author,(*(pointer+1)).author); (*pointer).year=(*(pointer+1)).year; (*pointer).copies=(*(pointer+1)).copies; //copy back temp val strcpy((*(pointer+1)).name,temp.name); strcpy((*(pointer+1)).author,temp.author); (*(pointer+1)).year=temp.year; (*(pointer+1)).copies=temp.copies; sorted=0; } *pointer++; } } } My Imput The C Programming Language X Y Z 1934 56 Inferno Dan Brown 1993 453 harry Potter and the soccers stone J K Rowling 2012 150 Ruby On Rails jim aurther nil 2004 130 Learn Python Easy Way gmaps4rails 1967 100 And the output ########################################################################## Book: Inferno Author: Dan Brown Year of Publication: 1993 No of Copies: 453 ########################################################################## ########################################################################## Book: The C Programming Language Author: X Y Z Year of Publication: 1934 No of Copies: 56 ########################################################################## ########################################################################## Book: Ruby On Rails Author: jim aurther nil Year of Publication: 2004 No of Copies: 130 ########################################################################## ########################################################################## Book: Learn Python Easy Way Author: gmaps4rails Year of Publication: 1967 No of Copies: 100 ########################################################################## ########################################################################## Book: Author: Year of Publication: 0 No of Copies: 0 ########################################################################## We can see the above sorting is wrong? What I'm I doing wrong?

Read the article

Problem using delete[] (Heap corruption) when implementing operator+= (C++)

- by Darel

I've been trying to figure this out for hours now, and I'm at my wit's end. I would surely appreciate it if someone could tell me when I'm doing wrong. I have written a simple class to emulate basic functionality of strings. The class's members include a character pointer data (which points to a dynamically created char array) and an integer strSize (which holds the length of the string, sans terminator.) Since I'm using new and delete, I've implemented the copy constructor and destructor. My problem occurs when I try to implement the operator+=. The LHS object builds the new string correctly - I can even print it using cout - but the problem comes when I try to deallocate the data pointer in the destructor: I get a "Heap Corruption Detected after normal block" at the memory address pointed to by the data array the destructor is trying to deallocate. Here's my complete class and test program: #include <iostream> using namespace std; // Class to emulate string class Str { public: // Default constructor Str(): data(0), strSize(0) { } // Constructor from string literal Str(const char* cp) { data = new char[strlen(cp) + 1]; char *p = data; const char* q = cp; while (*q) *p++ = *q++; *p = '\0'; strSize = strlen(cp); } Str& operator+=(const Str& rhs) { // create new dynamic memory to hold concatenated string char* str = new char[strSize + rhs.strSize + 1]; char* p = str; // new data char* i = data; // old data const char* q = rhs.data; // data to append // append old string to new string in new dynamic memory while (*p++ = *i++) ; p--; while (*p++ = *q++) ; *p = '\0'; // assign new values to data and strSize delete[] data; data = str; strSize += rhs.strSize; return *this; } // Copy constructor Str(const Str& s) { data = new char[s.strSize + 1]; char *p = data; char *q = s.data; while (*q) *p++ = *q++; *p = '\0'; strSize = s.strSize; } // destructor ~Str() { delete[] data; } const char& operator[](int i) const { return data[i]; } int size() const { return strSize; } private: char *data; int strSize; }; ostream& operator<<(ostream& os, const Str& s) { for (int i = 0; i != s.size(); ++i) os << s[i]; return os; } // Test constructor, copy constructor, and += operator int main() { Str s = "hello"; // destructor for s works ok Str x = s; // destructor for x works ok s += "world!"; // destructor for s gives error cout << s << endl; cout << x << endl; return 0; }

Read the article

Dot Net Nuke module works in "Edit" mode but not for "View": cache problem?

- by Godeke

I have a DNN task that simply runs some Javascript to compute a price based on a few input fields. This module works fine on our production site, but we had a company do a skin for us to improve the look of the site and the module fails under this new system. (DNN 05.06.00 (459) although it was 5.5 prior... I updated in a futile hope that it was a bug in the old revision.) What is incredibly odd about this is that the module works fine when I'm logged in to DNN and using the Edit mode as an administrator. In this case the small snippet of JavaScript loads fine and filling the fields results in a price. On the other hand it I click "View" (or more importantly, if I'm not logged in at all) the page loads a cached copy. Even odder, I have found the cache files in \Portals\2\Cache\Pages are generated and then only the cached data is being used. When the cached copy is loaded, the JavaScript doesn't appear (it is normally created via a Page.ClientScript.RegisterClientScriptBlock(). Additionally, the button which posts the data to the server doesn't execute any of the server side code (confirmed with a debugger) but instead just reloads the cached copy. If I manually delete the files in \Portals\2\Cache\Pages then everything works properly, but I have to do so after every page load: failing to do so simply loads the page as it was last generated repeatedly. Resetting the application (either via the UI or editing web.config) doesn't change this and clearing the cache from the Host Settings page doesn't actually clear these cached pages. I'm guessing that Edit mode bypasses the cache in some way, but I have gone as far as turning off all caching on the site (which is horrible for performance) and the cached version is still loaded. Has anyone seen anything like this? Shouldn't clearing the cache clear the files (I'm using the File provider for caching)? Shouldn't even a cached page go back to the server if the user posts back? EDIT: I should point out that permissions don't appear to be a problem on the cache directory... other pages cached output are deleted from this folder, just this page has this issue. EDIT 2: Clarifying some settings and conditions which I didn't provide. First, this module works fine in production under DNN 5.6.0. In our test environment with the consulting company's changes it fails (the changes are skin and page layout only in theory: the module source itself verifies as unchanged). All cache settings and the like have been verified the same between the two and we only resorted to setting the module cache to 0 and -1 (and disabling the test site's cache entirely) when we couldn't find another cause for the problem. I have watched the cache work correctly on many other pages in test: there is something about this page that is causing the problem. We have punted and are creating an installable skin based on the consultant's work as I suspect they have somehow corrupted the DNN install (database side I think).

Read the article

Bash Shell Scripting Errors: ./myDemo: 56: Syntax error: Unterminated quoted string [EDITED]

- by ???

Could someone take a look at this code and find out what's wrong with it? #!/bin/sh while : do echo " Select one of the following options:" echo " d or D) Display today's date and time" echo " l or L) List the contents of the present working directory" echo " w or W) See who is logged in" echo " p or P) Print the present working directory" echo " a or A) List the contents of a specified directory" echo " b or B) Create a backup copy of an ordinary file" echo " q or Q) Quit this program" echo " Enter your option and hit <Enter>: \c" read option case "$option" in d|D) date ;; l|L) ls $PWD ;; w|w) who ;; p|P) pwd ;; a|A) echo "Please specify the directory and hit <Enter>: \c" read directory if [ "$directory = "q" -o "Q" ] then exit 0 fi while [ ! -d "$directory" ] do echo "Usage: "$directory" must be a directory." echo "Re-enter the directory and hit <Enter>: \c" read directory if [ "$directory" = "q" -o "Q" ] then exit 0 fi done printf ls "$directory" ;; b|B) echo "Please specify the ordinary file for backup and hit <Enter>: \c" read file if [ "$file" = "q" -o "Q" ] then exit 0 fi while [ ! -f "$file" ] do echo "Usage: \"$file\" must be an ordinary file." echo "Re-enter the ordinary file for backup and hit <Enter>: \c" read file if [ "$file" = "q" -o "Q" ] then exit 0 fi done cp "$file" "$file.bkup" ;; q|Q) exit 0 ;; esac echo done exit 0 There are some syntax errors that I can't figure out. However I should note that on this unix system echo -e doesn't work (don't ask me why I don't know and I don't have any sort of permissions to change it and even if I wouldn't be allowed to) Bash Shell Scripting Error: "./myDemo ./myDemo: line 62: syntax error near unexpected token done' ./myDemo: line 62: " [Edited] EDIT: I fixed the while statement error, however now when I run the script some things still aren't working correctly. It seems that in the b|B) switch statement cp $file $file.bkup doesn't actually copy the file to file.bkup ? In the a|A) switch statement ls "$directory" doesn't print the directory listing for the user to see ? #!/bin/bash while $TRUE do echo " Select one of the following options:" echo " d or D) Display today's date and time" echo " l or L) List the contents of the present working directory" echo " w or W) See who is logged in" echo " p or P) Print the present working directory" echo " a or A) List the contents of a specified directory" echo " b or B) Create a backup copy of an ordinary file" echo " q or Q) Quit this program" echo " Enter your option and hit <Enter>: \c" read option case "$option" in d|D) date ;; l|L) ls pwd ;; w|w) who ;; p|P) pwd ;; a|A) echo "Please specify the directory and hit <Enter>: \c" read directory if [ ! -d "$directory" ] then while [ ! -d "$directory" ] do echo "Usage: "$directory" must be a directory." echo "Specify the directory and hit <Enter>: \c" read directory if [ "$directory" = "q" -o "Q" ] then exit 0 elif [ -d "$directory" ] then ls "$directory" else continue fi done fi ;; b|B) echo "Specify the ordinary file for backup and hit <Enter>: \c" read file if [ ! -f "$file" ] then while [ ! -f "$file" ] do echo "Usage: "$file" must be an ordinary file." echo "Specify the ordinary file for backup and hit <Enter>: \c" read file if [ "$file" = "q" -o "Q" ] then exit 0 elif [ -f "$file" ] then cp $file $file.bkup fi done fi ;; q|Q) exit 0 ;; esac echo done exit 0 Another thing... is there an editor that I can use to auto-parse code? I.e something similar to NetBeans?

Read the article

How do I detect a file write error in C?

- by rich

I have an embedded environment where a user might insert or remove a USB flash drive. I would like to know if the drive has been removed, or if there is some other problem when I try to write to the drive. However, Linux just saves the information in its buffers and returns with no indicated error. The computer I'm using comes with a 2.4.26 kernel and libc 2.3.2. I'm mounting the drive this way: i = mount(MEMORY_DEV_PATH, MEMORY_MNT_PATH, "vfat", MS_SYNCHRONOUS, NULL); That works: 50:/root # mount /dev/scsi/host0/bus0/target0/lun0/part1 on /mem type vfat (rw,sync) 50:/root # Later, I try to copy a file to it: int ifile, ofile; ifile = open("/tmp/tmpmidi.mid", O_RDONLY); if (ifile < 0) { perror("open in"); break; } ofile = open(current_file_name.c_str(), O_WRONLY | O_SYNC); if (ofile < 0) { perror("open out"); break; } #define BUFSZ 256 char buffer[BUFSZ]; while (1) { i = read(ifile, buffer, BUFSZ); if (i < 0) { perror("read"); break; } j = write(ofile, buffer, i); if (j < 0) { perror("write"); break; } if (i != j) { perror("Sizes wrong"); break; } if (i < BUFSZ) { printf("Copy is finished, I hope\n"); close(ifile); close(ofile); break; } } If this snippet of code is executed with a write-protected USB memory, the result is Copy is finished, I hope amid a flurry of error messages from the kernel on the console. I believe the same thing would happen if I simply removed the USB drive (without unmounting it). I have also fiddled with devfs. I figured out how to get it to automatically mount the drive, (with the REGISTER event) but it never seems to trigger the UNREGISTER when I pull out the memory. How can I determine in my program whether I have successfully created a file? Update 4 July: It was a silly oversight of me not to check the result from close(). Unfortunately, the file can be closed without error. So that didn't help. What about fsync()? That sounds like a good idea, but that didn't catch the error either. There might be some interesting information in /sys if I had such a thing. I believe that didn't get added until 2.6.?. The comment(s) about the quality of my flash drive are probably justified. It's one of the earlier ones. In fact, write protect switches seem to be extremely rare these days. I think I have to use the overkill option: Create a file, unmount & remount the drive, and check to see if the file is there. If that doesn't solve my problem, then something is really messed up! Note to myself: Make sure the file you try to create isn't already there! By the way, this does happen to be a C++ program. You can tell by the .c_str() which I had intended to edit out for simplicity.

Read the article

Visual Studio 2013 Static Code Analysis in depth: What? When and How?

- by Hosam Kamel

In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning. 2 Title The title of warning message 3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally. Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

Read the article

Simple CSS Scale-Nine Layout

- by rfkrocktk

After all these years, I still haven't learned CSS layout, so bear with me. I'm trying to create a container with rounded corners that I generated in Photoshop. The background of the container is white, so I have eight images: top-left-corner, top, top-right-corner, right, bottom-right-corner, bottom, bottom-left-corner, and left. The edges have a drop shadow around them so yes, I do need 8 sides. How would I lay this out in CSS? I tried and failed miserably to do it with a table + CSS. How would I do it using divs?

Read the article

nunit-console.exe problem with Mono

- by prosseek

I could make a dll for NUnit (http://stackoverflow.com/questions/2967726/nunit-test-under-mono), but when I tried to run in with nunit-console.exe I get the following error message. Runtime Environment - OS Version: Unix 10.3.0.0 CLR Version: 2.0.50727.1433 ( 2.6.4 (tarball Thu Apr 22 13:24:33 MDT 2010) ) ProcessModel: Default DomainUsage: Single Execution Runtime: mono-2.0 ** (/Users/smcho/bin/NUnit-2.5.5.10112/bin/net-2.0/nunit-console.exe:36800): WARNING **: The following assembly referenced from /private/var/folders/m4/m4u1hmP+FHOQaiZbHj1UCk+++TI/-Tmp-/nunit20/ShadowCopyCache/36800_634111616836311880/Tests_-22323139/assembly/shadow/54274fc2/118e035c_45a94c9e_00000001/mut.dll could not be loaded: Assembly: nunit.framework (assemblyref_index=1) Version: 2.5.5.10112 Public Key: 96d09a1eb7f44a77 System error: Invalid argument ** (/Users/smcho/bin/NUnit-2.5.5.10112/bin/net-2.0/nunit-console.exe:36800): WARNING **: Could not load file or assembly 'nunit.framework, Version=2.5.5.10112, Culture=neutral, PublicKeyToken=96d09a1eb7f44a77' or one of its dependencies. What might be wrong? I have nunit.framework.dll under /Users/smcho/bin/NUnit-2.5.5.10112/bin/net-2.0/framework, but it doesn't seem to know about this.

Read the article

SQLAuthority Book Review – DBA Survivor: Become a Rock Star DBA

- by pinaldave

DBA Survivor: Become a Rock Star DBA – Thomas LaRock Link to Amazon Link to Flipkart First of all, I thank all my readers when I wrote that I could not get this book in any local book stores, because they offered me to send a copy of this good book. A very special mention goes to Sripada and Jayesh for they gave so much effort in finding my home address and sending me the hard copy. Before, I did not have the copy of the book, but now I have two of it already! It surprises me how my readers were able to find my home address, which I have not publicly shared. Quick Review: This is indeed a one easy-to-read and fun book. We all work day and night with technology yet we should not forget to show our love and care for our family at home. For our souls that starve for peace and guidance, this one book is the “it” book for all the technology enthusiasts. Though this book was specifically written for DBAs, the reach is not limited to DBAs only because the lessons incorporated in it actually applies to all. This is one of the most motivating technical books I have read. Detailed Review: Let us go over a few questions first: Who wants to be as famous as rockstars in the field of Database Administration? How can one learn what it takes to become a top notch software developer? If you are a beginner in your field, how will you go to next level? Your boss may be very kind or like Dilbert’s Boss, what will you do? How do you keep growing when Eco-system around you does not support you? You are almost at top but there is someone else at the TOP, what do you do and how do you avoid office politics? As a database developer what should be your basic responsibility? and many more… I was able to completely read book in one sitting and I loved it. Before I continue with my opinion, I want to echo the opinion of Kevin Kline who has written the Forward of the book. He has truly suggested that “You hold in your hands a collection of insights and wisdom on the topic of database administration gained through many years of hard-won experience, long nights of study, and direct mentorship under some of the industry’s most talented database professionals and information technology (IT) experts.” Today, IT field is getting bigger and better, while talking about terabytes of the database becomes “more” normal every single day. The gods and demigods of database professionals are taking care of these large scale databases and are carefully maintaining them. In this world, there are only a few beginnings on the first step. There are many experts in different technology fields who are asked to address the issues with databases. There is YOU and ME, who is just new to this work. So we ask ourselves WHERE to begin and HOW to begin. We adore and follow the religion of our rockstars, but oftentimes we really have no idea about their background and their struggles. Every rockstar has his success story which needs to be digested before learning his tricks and tips. This book starts with the same note and teaches the two most important lessons for anybody who wants to be a DBA Rockstar – to focus on their single goal of learning and to excel the technology. The story starts with three simple guidelines – Get Prepared, Get Trained, Get Certified. Once a person learns the skills, and then, it would be about time that he needs to enrich or to improve those skills you have learned. I am sure that the right opportunity will come finding themselves and they will not have to go run behind it. However, the real challenge for any person is the first day or first week. A new employee, no matter how much experienced he is, sometimes has no clue about what should one do at new job. Chapter 2 and chapter 3 precisely talk about what one should do as soon as the new job begins. It is also written with keeping the fact in focus that each job can be very much different but there are few infrastructure setups and programming concepts are the same. Learning basics of database was really interesting. I like to focus on the roots of any technology. It is important to understand the structure of the database before suggesting what indexes needs to be created, the same way this book covers the most essential knowledge one must learn by most database developers. I think the title of the fourth chapter is my favorite sentence in this book. I can see that I will be saying this again and again in the future – “A Development Server Is a Production Server to a Developer“. I have worked in the software industry for almost 8 years now and I have seen so many developers sitting on their chairs and waiting for instructions from their lead about how to improve the code or what to do the next. When I talk to them, I suggest that the experiment with their server and try various techniques. I think they all should understand that for them, a development server is their production server and needs to pay proper attention to the code from the beginning. There should be NO any inappropriate code from the beginning. One has to fully focus and give their best, if they are not sure they should ask but should do something and stay active. Chapter 5 and 6 talks about two essential skills for any developer and database administration – what are the ethics of developers when they are working with production server and how to support software which is running on the production server. I have met many people who know the theory by heart but when put in front of keyboard they do not know where to start. The first thing they do opening the browser and searching online, instead of opening SQL Server Management Studio. This can very well happen to anybody who is experienced as well. Chapter 5 and 6 addresses that situation as well includes the handy scripts which can solve almost all the basic trouble shooting issues. “Where’s the Buffet?” By far, this is the best chapter in this book. If you have ever met me, you would know that I love food. I think after reading this chapter, I felt Thomas has written this just keeping me in mind. I think there will be many other people who feel the same way, too. Even my wife who read this chapter thought this was specifically written for me. I will not talk any more about this chapter as this is one must read chapter. And of course this is about real ‘FOOD‘. I am an SQL Server Trainer and Consultant and I totally agree with the point made in the chapter 8 of this book. Yes, it says here that what is necessary to train employees and people. Millions of dollars worth the labor is continuously done in the world which has faults and incorrect. Once something goes wrong, very expensive consultant comes in and fixes the problem. This whole cycle which can be stopped and improved if proper training is done. There is plenty of free trainings available as well, if one cannot afford paid training. “Connect. Learn. Share” – I think this is a great summary and bird’s eye view of this book. Networking is the key. Everything which is discussed in this book can be taken to next level if one properly uses this tips and continuously grow with it. Connecting with others, helping learn each other and building the good knowledge sharing environment should be the goal of everyone. Before I end the review I want to share a real experience. I have personally met one DBA who has worked in a single department in a company for so long that when he was put in a different department in his company due to closing that department, he could not adjust and quit the job despite the same people and company around him. Adjusting in the new environment gets much tougher as one person gets more and more experienced. This book precisely addresses the same issue along with their solutions. I just cannot stop comparing the book with my personal journey. I found so many things which are coincidently in the book is written as how we developer and DBA think. I must express special thanks to Thomas for taking time in his personal life and write this book for us. This book is indeed a book for everybody who wants to grow healthy in the tough and competitive environment. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, SQLServer, T SQL, Technology

Read the article

Add Free Google Apps to Your Website or Blog

- by Matthew Guay

Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs? Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right. Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps. Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information. The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account. Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain. The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways. Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step. Now, in a separate browser window or tab, open your WordPress Dashboard. Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field. Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section. Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain. You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory. In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it. You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html. Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site. Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up. Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard. If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration. Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup. Click Activate email to get your Gmail-powered email running on your domain. Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google. If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps. Otherwise, you’ll need to manually add these records before clicking that button. Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar. With some hosts, you may have to contact support to have them add the MX records for you. Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps. If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed. Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account. Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information. Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain! All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts. Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online. Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain. Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

Read the article

Use Those Extra Mouse Buttons to Increase Efficiency

- by Mark Virtue

Did you know that the most commonly used mouse actions are clicking a window’s “Close” button (the X in the top-right corner), and clicking the “Back” button (in a browser and various other programs)? How much time do you spend every day locating the Close button or the Back button with your mouse so that you can click on them? And what about that mouse you’re using – how many buttons does it have, besides the two main ones? Most mouses these days have at least four (including the scroll-wheel, which a lot of people don’t realize is also a button as well). Why not assign those extra buttons to your most common mouse actions, and save yourself a bundle of mousing-around time every day? If your mouse was manufactured by one of the “premium” mouse manufacturers (Microsoft, Logitech, etc), it almost certain came with driver software to allow you to customize your mouse’s controls and take advantage of your mouse’s special features. Microsoft, for example, provides driver software called IntelliPoint (link below), while Logitech provides SetPoint. It’s possible that your mouse has some extra buttons but doesn’t come with its own driver software (the author is using a Microsoft Bluetooth Notebook Mouse 5000, which amazingly is not supported by the Microsoft IntelliPoint software!). If your mouse falls into this category, you can use a marvelous free product called X-Mouse Button Control, from Highresolution Enterprises (link below). It provides a truly amazing array of mouse configuration options, including assigning actions to buttons on a per-application basis. Once X-Mouse Button Control is downloaded, its setup process is quite straightforward. Once downloaded, you can start the program via Start / Highresolution Enterprises / X-Mouse Button Control. You will find the program’s icon in the system tray: Right-click on the icon and select Setup from the pop-up menu. The program’s configuration window appears: It’s extremely unlikely that we will want to change the functionality of our mouse’s two main buttons (left and right), so instead we’ll look at the rest of the options on the right side of the window. The Middle Button refers to either the third, middle button (found on some old mouses), or the pressing of the wheel itself, as a button (if you didn’t know you could press your wheel like a button, try it out now). Mouse Button 4 and Mouse Button 5 usually refer to the extra buttons found on the side of the mouse, often near your thumb. So what can we use these extra mouse buttons for? Well, clearly Close and Back are two obvious candidates. Each of these can be found by selecting them from the drop-down menu next to each button field: Once the two options are chosen, the window will look something like this: If you’re not interested in choosing Back or Close, you may like to try some of the other options in the list, including: Cut, Copy and Paste Undo Show the Desktop Next/Previous track (for media playback) Open any program Simulate any keystroke or combination of keystrokes ….and many other options. Explore the drop-down list to see them all. You may decide, for example, that closing the current document (as opposed to the current program) would be a good use for Mouse Button 5. In other words, we need to simulate the keypress of Ctrl-F4. Let’s see how we achieve this. First we select Simulated Keystrokes from the drop-down list: The Simulated Keystrokes window opens: The instructions on the page are pretty comprehensive. If you want to simulate the Ctrl-F4 keystroke, you need to type {CTRL}{F4} into the box: …and then click OK. Assigning Actions to Buttons on a Per-Application Basis One of the most powerful features of X-Mouse Button Control is the ability to assign actions to buttons on a per-application basis. This means that if we have a particular program open, then our mouse will behave differently – our buttons will do different things. For example, when we have Windows Media Player open, for example, we may wish to have buttons assigned to Play/Pause, Next track and Previous track, as well as changing the volume with the mouse! This is easy with X-Mouse Button Control. We start by opening Windows Media Player. This makes the next step easier. Then we return to X-Mouse Button Control and add a new “configuration”. This is done by clicking the Add button: A window opens containing a list of all running programs, including our recently opened Windows Media Player: We select Windows Media Player and click OK. A new, blank “configuration” is created: We repeat the earlier steps to assign buttons to Play/Pause, Next track and Previous track, and assign scrolling the wheel to alter the volume: To save all our changes and close the window, we click Apply. Now spend a few minutes thinking of all the applications you use the most, and what are the most common simple tasks you perform in each of those applications. Those tasks are then perfect candidates for per-application button assignments. There are many more configuration options and capabilities of X-Mouse Button Control – too many to list here. We encourage you to spend a bit of time exploring the Setup window. Then, most important of all, don’t forget to use your new mouse buttons! Get into the habit of using them, and then after a while you’ll start to wonder how you ever tolerated the laborious, tedious, time-consuming process of actually locating each window’s Close button… Download X-Mouse Button Control Highresolution Enterprise Similar Articles Productive Geek Tips Add Specialized Toolbar Buttons to Firefox the Easy WayBoost Your Mouse Pointing Accuracy in WindowsMake Mouse Navigation Faster in WindowsVista Style Popup Previews for Firefox TabsStupid Geek Tricks: Using the Quick Zoom Feature in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

Read the article

CodePlex Daily Summary for Sunday, April 15, 2012

CodePlex Daily Summary for Sunday, April 15, 2012Popular ReleasesAssaultCube Reloaded: 2.4.1 Valor: POSSIBLE KNIFE CRASH FIX Codename Valor as suggested by LMFAO! on the forums Weapon tweaks Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included)callisto: callisto 2.0.25: removed 2 ip ranges from hotspot shield black list.KBCsv: KBCsv V1.4.0.0: #11872 (skipping records with delimited text can break parser) #11873 (globalization support in CsvWriter) #11185 (more versatile constructor and method overloads)National Geographic Photo of the Day Wallpaper Changer: Photo of the Day Wallpaper Changer v2.0: National Geographic - Photo of the Day Wallpaper Changer v2.0 is an improved version. It has some new features like improved GUI, automatic update and date to date photo archiver etc. please check out the user guide for more information. Please copy the exe in a directory and run. Its that simple to use :).Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.6: Bug Fixes nuget was broken for Timespan and complete build due to how i did the target. Corrected and made all 3 match. Color Slider (and by default Color Picker) didn't respect view state for being disabled depending on how it was set. Test application now has test cases.Json.NET: Json.NET 4.5 Release 3: Change - DefaultContractResolver.IgnoreSerializableAttribute is now true by default Fix - Fixed MaxDepth on JsonReader recursively throwing an error Fix - Fixed SerializationBinder.BindToName not being called with full assembly namesVisual Studio Team Foundation Server Branching and Merging Guide: v2 - For Visual Studio 11: Welcome to the BETA of the Branching and Merging Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation has been reviewed by the quality and recording te...Media Companion: MC 3.435b Release: This release should be the last beta for 3.4xx. A handful of problems have been sorted out since last weeks release. If there are no major problems this time, it will upgraded to 3.500 Stable at the end of the week! General The .NET Framework has been modified to use the Client profile, as provided by normal Windows updates; no longer is there a requirement to download and install the Full profile! mc_com.exe has been worked on to mimic proper Media Companion output (a big thanks to vbat99...Wholemy.LinkedLists: wholemy.linkedlists.2012.04.12.38: libs and srcTHE NVL Maker: The NVL Maker Ver 3.12: SIM??????，TRA??????，ZIP????。 ????????????????，??????~（??????????????????） ??????? simpatch1440x900 trapatch1440x900 ?????1400x900??1440x900，?????????????Data.xp3。 ???? ?????3.12?EXE????????????????， ??????????????，??Tool/krkrconf.exe，??Editor.exe， ???????????????「??????」。 ?????Editor.exe??????。 ???? ???? http://etale.us/gameupload/THE_NVL_Maker_ver3.12_sim.zip ???? http://www.mediafire.com/?je51683g22bz8vo ??Infinite Creation?? http://bbs.etale.us/forum.php ?????? ???? 3.12 ??? ???、????...Quick Performance Monitor: Version 1.8.2: Version 1.8.2. Add the ability for qpmset files to also store the Window location/size so predefined 'sets' can be forced to always open on the same place of the screen.SnmpMessenger: 0.1.1.1: Project Description SnmpMessenger, a messenger. Using the SNMP protocol to exchange messages. It's developed in C#. SnmpMessenger For .Net 4.0, Mono 2.8. Support SNMP V1, V2, V3. Features Send get, set and other requests and get the response. Send and receive traps. Handle requests and return the response. Note This library is compliant with the Common Language Specification(CLS). The latest version is 0.1.1.1. It is only a messenger, does not involve VACM. Any problems, Please mailto: wa...Python Tools for Visual Studio: 1.1.1: We’re pleased to announce the release of Python Tools for Visual Studio 1.1.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython and IronPython • Python editor with advanced member and signature intellisense • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging • Profiling with multiple view...Supporting Guidance and Whitepapers: v1 - Team Foundation Service Whitepapers: Welcome to the BETA release of the Team Foundation Service Whitepapers preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review All critical bugs have been resolved Known Issue...LINQ to Twitter: LINQ to Twitter Beta v2.0.24: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, and Client Profile. 100% Twitter API coverage. Also available via NuGet.Kendo UI ASP.NET Sample Applications: Sample Applications (2012-04-11): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.SCCM Client Actions Tool: SCCM Client Actions Tool v1.12: SCCM Client Actions Tool v1.12 is the latest version. It comes with following changes since last version: Improved WMI date conversion to be aware of timezone differences and DST. Fixed new version check. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively availab...Dual Browsing: Dual Browser: Please note the following: I setup the address bar temporarily to only accepts http:// .com addresses. Just type in the name of the website excluding: http://, www., and .com; (Ex: for www.youtube.com just type: youtube then click OK). The page splitter can be grabbed by holding down your left mouse button and move left or right. By right clicking on the page background, you can choose to refresh, go back a page and so on. Demo video: http://youtu.be/L7NTFVM3JUYLiberty: v3.2.0.1 Release 9th April 2012: Change Log-Fixed -Reach Fixed a bug where the object editor did not work on non-English operating systemsPath Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.New ProjectsADENA: This project consists in the development of a Graphical User Interface (GUI) for a proof assistant for Propositional Classical Logic based on Natural Deduction method.Alternity Warships Editor: This is a tool designed to easy the process of creating a new spaceship for Alternity using the Warship rules.BigBallz: Projeto de site de Bolões para campeonatos diversos. A princípio pensado para copa do mundo de futebol de 2010Crescent: bunch of mac scriptsDemoVasquez: Demo Proyecto 1Didrotuos: DidrotuosEat Out Advocate: Eat Out Advocate --------------------Kuttiflow: A simple implementation of Workflow for .NetLuan Van Cuoi Khoa: Lu?n van cu?i khoa ÐH Tây Nguyênmapaconwindowsphone: probar un mapa de bing mapsMovie Renamer: Is your movie collection a mess? No idea which movie is which? This tool easily renames movies based on the title and the year of the movie. Helps you sort out that movie collection! It will download from IMDB the closest matches based on the name of the file. Very simple written in WPF, so it will need the .NET 4 framework. At the moment you cannot set how you want to movie to be renamed, it will always be: "MovieTitle (Year).ext".Online Math Calculator: This is an Online Math Calculator. What this does is take your equation in the usual form and convert every variable to x, y, and every constant to a, b, c, d, e, etc... use wolfram|alpha and then convert back to the input format. This allows to input most equations.Orchard on Windows Azure with Dynamic Deploy: Dynamic Deploy is a cloud deployment platform. This project includes the Orchard source code that was used to create a Windows Azure build. The original source has not been modified. We have just added more themes and modules and modified web.config with a machine key. visit httppcvvpes: pcvvpesPesquisa de Satisfacao: PesquisaPit of Despair: An XNA 4.0 game in C# focused on learning to write overhead dungeon crawl games. Inpired from games such as Zelda, Wizardy, perhaps some original Final Fantasy.Prova Branquinho: Prova BranquinhoRibHat: RibHat is a framework for building websites, forums, blogs, and web-based information systems. It is a set of libraries that help the programmer to get rid from the immobility of CMS, obtaining a maximum level of customization.SetupWizard: a SetupWizard, install windows service, create IIS site, create database during installation.SharkOS: This operating system is the system Arkadia OS but with a GUI, it is created in c #, it will be fast and no lag.Shopping List: Shopping List is a simple WP7 application that enables tracking of items to buy when going for groceries.Sim Cricket: Cricket simulation game.. For cricket and C# fans.. Simple InterNET Daemon: Simple InterNET DaemonSteggy: Steganography project. SychevIgor Win8 Apps Source Code: SychevIgor Win8 Apps Source Codetest53768492156478: nothingTool to change monitor display frequency on HTPC: This is a small application that can change the monitors refresh-rate by simply running one of the applications for the desired refresh-rate. It was developed to make it easy to change the refresh rate, when launching external media players from XBMC and so on... And it was published here, so that others can see how easily it can be done.TravelSaver: Hajj Umrah USA, Travel SaverUpdateBot: UpdateBot is a GUI application that simplifies and automates the downloading and parsing of FileHippo.com's Update Checker result pages.

Read the article

ASP.NET Load unmanaged dll from bin folder

- by Quandary

Question: I use an embedded Firebird database in ASP.NET. Now, Firebird has a .NET wrapper around native dlls. The problem is, with the .NET compilation and execution process, the dlls get shadow copied to a temporary folder. Unfortunately, only the .NET dlls, and not the native dll. See http://msdn.microsoft.com/en-us/library/ms366723.aspx for details. Now, this makes it necessary to put the unmanaged dll somewhere into the system32 directory (or any other directory in the path environment variable). Now, I want to change the wrapper/native dll (opensource), so it loads the dll also if they are only in the bin folder. Now, my problem is, how can I, in .NET, load an unmanaged dll from an absolute path ? The absolute path is determined at runtime, not at compile-time...

Read the article

tfs 2010 RC Agile Process template update New Task progress report

Maybe my next post will just be about why I am so excited and impressed with the out of the box templates. But, for this first blog with my new focus, I thought I would just walk through the process I went through to create a task progress report (to enhance the out of the box Agile template). So, I started with the MSF for Agile Development 5.0 RC template. After reviewing the template, I came away pretty excited about many of the new reports. I am especially excited about the reporting services reports. The big advantage I see here is that these are querying the Warehouse directly instead of the Analysis Services Cube which means that they are much closer to real-time which I find very important for reports like Burndown and task status. One report that I focused on right away was the User Story Progress Report. An overview is shown below: This report is very useful, but a lot of our internal managers really prefer to manage at the task level and either dont have stories in TFS or would like to view this type of report for tasks in addition to the User Stories. So, what did I do? Step 1: Download the Agile Template In VS 2010 RC, open Process Template Manager from Team->Team Project Collection Settings. Download the MSF for Agile Development template to your local file system. A project template is a folder of xml files. There is a ProcessTemplate.xml in the root and then a bunch of directories for things like Work Item Definitions and Queries, Reports, Shared Documents and Source Control Settings. Step 2: Copy the folder My plan here is to make a new template with all of my modifications. You can also just enhance update the MSF template. However, I think it is cleaner when you start making modifications to make your own template. So, copy the folder and name it with your new template name. Step 3: Change Template Name Open ProcessTemplate.xml and change the <name> of the template. Step 4: Copy the rdl of the Report you want to use a starting point In my case, I copied Stories Progress.rdl and named the file Task Progress Breakdown.rdl. I reviewed the requirements for the new report with some of the users here and came up with this plan. Should show tasks and be expandable to show subtasks. Should add Assigned To and Estimated Finish Date as 2 extra columns. Step 5: Walkthrough the existing report to understand how it works The main thing that I do here is try to get the sql to run in SQL Management Studio. So, I can walkthrough the process of building up the data for the report. After analyzing this particular report I found a couple of very useful things. One, this report is already built to display subtasks if I just flip the IncludeTasks flag to 1. So, if you are using Stories and have tasks assigned to each story. This might give you everything you want. For my purposes, I did make that change to the Stories Progress report as I find it to be a more useful report to be able to see the tasks that comprise each story. But, I still wanted a task only version with the additional fields. Step 6: Update the report definition I tend to work on rdl in visual studio directly as xml. Especially when I am just altering an existing report, I find it easier than trying to deal with the BI Studio designer. For my report I made the following changes. Updated Fields Removed Stack Rank and Replaced with Priority since we dont use Stack Rank Added FinishDate and AssignedTo Changed the root deliverable SQL to pull @tasks instead of @deliverablecategory and added a join CurrentWorkItemView for FinishDate and Assigned to SELECT cwi.[System_Id] AS ID FROM [CurrentWorkItemView] cwi WHERE cwi.[System_WorkItemType] IN (@Task) AND cwi.[ProjectNodeGUID] = @ProjectGuid SELECT lh.SourceWorkItemID AS ID FROM FactWorkItemLinkHistory lh INNER JOIN [CurrentWorkItemView] cwi ON lh.TargetWorkItemID = cwi.[System_Id] WHERE lh.WorkItemLinkTypeSK = @ParentWorkItemLinkTypeSK AND lh.RemovedDate = CONVERT(DATETIME, '9999', 126) AND lh.TeamProjectCollectionSK = @TeamProjectCollectionSK AND cwi.[System_WorkItemType] NOT IN (@DeliverableCategory) Added AssignedTo and FinishDate columns to the @Rollups table Added two columns to the table used for column headers <Tablix Name="ProgressTable"> <TablixBody> <TablixColumns> <TablixColumn> <Width>2.7625in</Width> </TablixColumn> <TablixColumn> <Width>0.5125in</Width> </TablixColumn> <TablixColumn> <Width>3.4625in</Width> </TablixColumn> <TablixColumn> <Width>0.7625in</Width> </TablixColumn> <TablixColumn> <Width>1.25in</Width> </TablixColumn> <TablixColumn> <Width>1.25in</Width> </TablixColumn> </TablixColumns> Added Cells for the two new headers Added Cells to the data table to include the two new values (Assigned to & Finish Date) Changed a bunch of widths that would change the format of the report to display landscape and have room for the two additional columns Set the Value of the IncludeTasks Parameter to 1 <ReportParameter Name="IncludeTasks"> <DataType>Integer</DataType> <DefaultValue> <Values> <Value>=1</Value> </Values> </DefaultValue> <Prompt>IncludeTasks</Prompt> <Hidden>true</Hidden> </ReportParameter> Change a few descriptions on how the report should be used This is the resulting report I have attached the final rdl. Step 7: Update ReportTasks.xml Last step before the template is ready for use is to update the reportTasks.xml file in the reports folder. This file defines the reports that are available in the template. <report name="Task Progress Breakdown" filename="Reports\Task Progress Breakdown.rdl" folder="Project Management" cacheExpiration="30"> <parameters> <parameter name="ExplicitProject" value="" /> </parameters> <datasources> <reference name="/Tfs2010ReportDS" dsname="TfsReportDS" /> </datasources> </report> Step 8: Upload the template Open the process Template Manager just like Step 1. And upload the new template. Thats it. One other note, if you want to add this report to existing team project you will have to go into reportmanager (the reporting services portal) and upload the rdl to that projects directory.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

C#/.NET Little Wonders: The EventHandler and EventHandler<TEventArgs> delegates

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. In the last two weeks, we examined the Action family of delegates (and delegates in general), and the Func family of delegates and how they can be used to support generic, reusable algorithms and classes. So this week, we are going to look at a handy pair of delegates that can be used to eliminate the need for defining custom delegates when creating events: the EventHandler and EventHandler<TEventArgs> delegates. Events and delegates Before we begin, let’s quickly consider events in .NET. According to the MSDN: An event in C# is a way for a class to provide notifications to clients of that class when some interesting thing happens to an object. So, basically, you can create an event in a type so that users of that type can subscribe to notifications of things of interest. How is this different than some of the delegate programming that we talked about in the last two weeks? Well, you can think of an event as a special access modifier on a delegate. Some differences between the two are: Events are a special access case of delegates They behave much like delegates instances inside the type they are declared in, but outside of that type they can only be (un)subscribed to. Events can specify add/remove behavior explicitly If you want to do additional work when someone subscribes or unsubscribes to an event, you can specify the add and remove actions explicitly. Events have access modifiers, but these only specify the access level of those who can (un)subscribe A public event, for example, means anyone can (un)subscribe, but it does not mean that anyone can raise (invoke) the event directly. Events can only be raised by the type that contains them In contrast, if a delegate is visible, it can be invoked outside of the object (not even in a sub-class!). Events tend to be for notifications only, and should be treated as optional Semantically speaking, events typically don’t perform work on the the class directly, but tend to just notify subscribers when something of note occurs. My basic rule-of-thumb is that if you are just wanting to notify any listeners (who may or may not care) that something has happened, use an event. However, if you want the caller to provide some function to perform to direct the class about how it should perform work, make it a delegate. Declaring events using custom delegates To declare an event in a type, we simply use the event keyword and specify its delegate type. For example, let’s say you wanted to create a new TimeOfDayTimer that triggers at a given time of the day (as opposed to on an interval). We could write something like this: 1: public delegate void TimeOfDayHandler(object source, ElapsedEventArgs e); 2: 3: // A timer that will fire at time of day each day. 4: public class TimeOfDayTimer : IDisposable 5: { 6: // Event that is triggered at time of day. 7: public event TimeOfDayHandler Elapsed; 8: 9: // ... 10: } The first thing to note is that the event is a delegate type, which tells us what types of methods may subscribe to it. The second thing to note is the signature of the event handler delegate, according to the MSDN: The standard signature of an event handler delegate defines a method that does not return a value, whose first parameter is of type Object and refers to the instance that raises the event, and whose second parameter is derived from type EventArgs and holds the event data. If the event does not generate event data, the second parameter is simply an instance of EventArgs. Otherwise, the second parameter is a custom type derived from EventArgs and supplies any fields or properties needed to hold the event data. So, in a nutshell, the event handler delegates should return void and take two parameters: An object reference to the object that raised the event. An EventArgs (or a subclass of EventArgs) reference to event specific information. Even if your event has no additional information to provide, you are still expected to provide an EventArgs instance. In this case, feel free to pass the EventArgs.Empty singleton instead of creating new instances of EventArgs (to avoid generating unneeded memory garbage). The EventHandler delegate Because many events have no additional information to pass, and thus do not require custom EventArgs, the signature of the delegates for subscribing to these events is typically: 1: // always takes an object and an EventArgs reference 2: public delegate void EventHandler(object sender, EventArgs e) It would be insane to recreate this delegate for every class that had a basic event with no additional event data, so there already exists a delegate for you called EventHandler that has this very definition! Feel free to use it to define any events which supply no additional event information: 1: public class Cache 2: { 3: // event that is raised whenever the cache performs a cleanup 4: public event EventHandler OnCleanup; 5: 6: // ... 7: } This will handle any event with the standard EventArgs (no additional information). But what of events that do need to supply additional information? Does that mean we’re out of luck for subclasses of EventArgs? That’s where the generic for of EventHandler comes into play… The generic EventHandler<TEventArgs> delegate Starting with the introduction of generics in .NET 2.0, we have a generic delegate called EventHandler<TEventArgs>. Its signature is as follows: 1: public delegate void EventHandler<TEventArgs>(object sender, TEventArgs e) 2: where TEventArgs : EventArgs This is similar to EventHandler except it has been made generic to support the more general case. Thus, it will work for any delegate where the first argument is an object (the sender) and the second argument is a class derived from EventArgs (the event data). For example, let’s say we wanted to create a message receiver, and we wanted it to have a few events such as OnConnected that will tell us when a connection is established (probably with no additional information) and OnMessageReceived that will tell us when a new message arrives (probably with a string for the new message text). So for OnMessageReceived, our MessageReceivedEventArgs might look like this: 1: public sealed class MessageReceivedEventArgs : EventArgs 2: { 3: public string Message { get; set; } 4: } And since OnConnected needs no event argument type defined, our class might look something like this: 1: public class MessageReceiver 2: { 3: // event that is called when the receiver connects with sender 4: public event EventHandler OnConnected; 5: 6: // event that is called when a new message is received. 7: public event EventHandler<MessageReceivedEventArgs> OnMessageReceived; 8: 9: // ... 10: } Notice, nowhere did we have to define a delegate to fit our event definition, the EventHandler and generic EventHandler<TEventArgs> delegates fit almost anything we’d need to do with events. Sidebar: Thread-safety and raising an event When the time comes to raise an event, we should always check to make sure there are subscribers, and then only raise the event if anyone is subscribed. This is important because if no one is subscribed to the event, then the instance will be null and we will get a NullReferenceException if we attempt to raise the event. 1: // This protects against NullReferenceException... or does it? 2: if (OnMessageReceived != null) 3: { 4: OnMessageReceived(this, new MessageReceivedEventArgs(aMessage)); 5: } The above code seems to handle the null reference if no one is subscribed, but there’s a problem if this is being used in multi-threaded environments. For example, assume we have thread A which is about to raise the event, and it checks and clears the null check and is about to raise the event. However, before it can do that thread B unsubscribes to the event, which sets the delegate to null. Now, when thread A attempts to raise the event, this causes the NullReferenceException that we were hoping to avoid! To counter this, the simplest best-practice method is to copy the event (just a multicast delegate) to a temporary local variable just before we raise it. Since we are inside the class where this event is being raised, we can copy it to a local variable like this, and it will protect us from multi-threading since multicast delegates are immutable and assignments are atomic: 1: // always make copy of the event multi-cast delegate before checking 2: // for null to avoid race-condition between the null-check and raising it. 3: var handler = OnMessageReceived; 4: 5: if (handler != null) 6: { 7: handler(this, new MessageReceivedEventArgs(aMessage)); 8: } The very slight trade-off is that it’s possible a class may get an event after it unsubscribes in a multi-threaded environment, but this is a small risk and classes should be prepared for this possibility anyway. For a more detailed discussion on this, check out this excellent Eric Lippert blog post on Events and Races. Summary Generic delegates give us a lot of power to make generic algorithms and classes, and the EventHandler delegate family gives us the flexibility to create events easily, without needing to redefine delegates over and over. Use them whenever you need to define events with or without specialized EventArgs. Tweet Technorati Tags: .NET, C#, CSharp, Little Wonders, Generics, Delegates, EventHandler

Read the article

C#: Graphics DrawString to Exactly Place Text on a System.Label

- by jp2code

I have overridden the OnPaint method of my Label control in VS2008: void Label_OnPaint(object sender, PaintEventArgs e) { base.OnPaint(e); Label lbl = sender as Label; if (lbl != null) { string Text = lbl.Text; e.Graphics.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias; if (myShowShadow) { // draw the shadow first! e.Graphics.DrawString(Text, lbl.Font, new SolidBrush(myShadowColor), myShadowOffset, StringFormat.GenericDefault); } e.Graphics.DrawString(Text, lbl.Font, new SolidBrush(lbl.ForeColor), 0, 0, StringFormat.GenericDefault); } } This works, but I really want to find out how to center the text both vertically and horizontally. I've heard of the MeasureString() method, but my "Text" complicates matters because it could include page breaks. Could someone guide me with how to do this?

Read the article

Refactor This (Ugly Code)!

- by Alois Kraus

Ayende has put on his blog some ugly code to refactor. First and foremost it is nearly impossible to reason about other peoples code without knowing the driving forces behind the current code. It is certainly possible to make it much cleaner when potential sources of errors cannot happen in the first place due to good design. I can see what the intention of the code is but I do not know about every brittle detail if I am allowed to reorder things here and there to simplify things. So I decided to make it much simpler by identifying the different responsibilities of the methods and encapsulate it in different classes. The code we need to refactor seems to deal with a handler after a message has been sent to a message queue. The handler does complete the current transaction if there is any and does handle any errors happening there. If during the the completion of the transaction errors occur the transaction is at least disposed. We can enter the handler already in a faulty state where we try to deliver the complete event in any case and signal a failure event and try to resend the message again to the queue if it was not inside a transaction. All is decorated with many try/catch blocks, duplicated code and some state variables to route the program flow. It is hard to understand and difficult to reason about. In other words: This code is a mess and could be written by me if I was under pressure. Here comes to code we want to refactor: private void HandleMessageCompletion( Message message, TransactionScope tx, OpenedQueue messageQueue, Exception exception, Action<CurrentMessageInformation, Exception> messageCompleted, Action<CurrentMessageInformation> beforeTransactionCommit) { var txDisposed = false; if (exception == null) { try { if (tx != null) { if (beforeTransactionCommit != null) beforeTransactionCommit(currentMessageInformation); tx.Complete(); tx.Dispose(); txDisposed = true; } try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } return; } catch (Exception e) { Trace.TraceWarning("Failed to complete transaction, moving to error mode"+ e); exception = e; } } try { if (txDisposed == false && tx != null) { Trace.TraceWarning("Disposing transaction in error mode"); tx.Dispose(); } } catch (Exception e) { Trace.TraceWarning("Failed to dispose of transaction in error mode."+ e); } if (message == null) return; try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } try { var copy = MessageProcessingFailure; if (copy != null) copy(currentMessageInformation, exception); } catch (Exception moduleException) { Trace.TraceError("Module failed to process message failure: " + exception.Message+ moduleException); } if (messageQueue.IsTransactional == false)// put the item back in the queue { messageQueue.Send(message); } } You can see quite some processing and handling going on there. Yes this looks like real world code one did put together to make things work and he does not trust his callbacks. I guess these are event handlers which are optional and the delegates were extracted from an event to call them back later when necessary. Lets see what the author of this code did intend: private void HandleMessageCompletion( TransactionHandler transactionHandler, MessageCompletionHandler handler, CurrentMessageInformation messageInfo, ErrorCollector errors ) { // commit current pending transaction transactionHandler.CallHandlerAndCommit(messageInfo, errors); // We have an error for a null message do not send completion event if (messageInfo.CurrentMessage == null) return; // Send completion event in any case regardless of errors handler.OnMessageCompleted(messageInfo, errors); // put message back if queue is not transactional transactionHandler.ResendMessageOnError(messageInfo.CurrentMessage, errors); } I did not bother to write the intention here again since the code should be pretty self explaining by now. I have used comments to explain the still nontrivial procedure step by step revealing the real intention about all this complex program flow. The original complexity of the problem domain does not go away but by applying the techniques of SRP (Single Responsibility Principle) and some functional style but we can abstract the necessary complexity away in useful abstractions which make it much easier to reason about it. Since most of the method seems to deal with errors I thought it was a good idea to encapsulate the error state of our current message in an ErrorCollector object which stores all exceptions in a list along with a description what the error all was about in the exception itself. We can log it later or not depending on the log level or whatever. It is really just a simple list that encapsulates the current error state. class ErrorCollector { List<Exception> _Errors = new List<Exception>(); public void Add(Exception ex, string description) { ex.Data["Description"] = description; _Errors.Add(ex); } public Exception Last { get { return _Errors.LastOrDefault(); } } public bool HasError { get { return _Errors.Count > 0; } } } Since the error state is global we have two choices to store a reference in the other helper objects (TransactionHandler and MessageCompletionHandler)or pass it to the method calls when necessary. I did chose the latter one because a second argument does not hurt and makes it easier to reason about the overall state while the helper objects remain stateless and immutable which makes the helper objects much easier to understand and as a bonus thread safe as well. This does not mean that the stored member variables are stateless or thread safe as well but at least our helper classes are it. Most of the complexity is located the transaction handling I consider as a separate responsibility that I delegate to the TransactionHandler which does nothing if there is no transaction or Call the Before Commit Handler Commit Transaction Dispose Transaction if commit did throw In fact it has a second responsibility to resend the message if the transaction did fail. I did see a good fit there since it deals with transaction failures. class TransactionHandler { TransactionScope _Tx; Action<CurrentMessageInformation> _BeforeCommit; OpenedQueue _MessageQueue; public TransactionHandler(TransactionScope tx, Action<CurrentMessageInformation> beforeCommit, OpenedQueue messageQueue) { _Tx = tx; _BeforeCommit = beforeCommit; _MessageQueue = messageQueue; } public void CallHandlerAndCommit(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { if (_Tx != null && !errors.HasError) { try { if (_BeforeCommit != null) { _BeforeCommit(currentMessageInfo); } _Tx.Complete(); _Tx.Dispose(); } catch (Exception ex) { errors.Add(ex, "Failed to complete transaction, moving to error mode"); Trace.TraceWarning("Disposing transaction in error mode"); try { _Tx.Dispose(); } catch (Exception ex2) { errors.Add(ex2, "Failed to dispose of transaction in error mode."); } } } } public void ResendMessageOnError(Message message, ErrorCollector errors) { if (errors.HasError && !_MessageQueue.IsTransactional) { _MessageQueue.Send(message); } } } If we need to change the handling in the future we have a much easier time to reason about our application flow than before. After we did complete our transaction and called our callback we can call the completion handler which is the main purpose of the HandleMessageCompletion method after all. The responsiblity o the MessageCompletionHandler is to call the completion callback and the failure callback when some error has occurred. class MessageCompletionHandler { Action<CurrentMessageInformation, Exception> _MessageCompletedHandler; Action<CurrentMessageInformation, Exception> _MessageProcessingFailure; public MessageCompletionHandler(Action<CurrentMessageInformation, Exception> messageCompletedHandler, Action<CurrentMessageInformation, Exception> messageProcessingFailure) { _MessageCompletedHandler = messageCompletedHandler; _MessageProcessingFailure = messageProcessingFailure; } public void OnMessageCompleted(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageCompletedHandler != null) { _MessageCompletedHandler(currentMessageInfo, errors.Last); } } catch (Exception ex) { errors.Add(ex, "An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"); } if (errors.HasError) { SignalFailedMessage(currentMessageInfo, errors); } } void SignalFailedMessage(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageProcessingFailure != null) _MessageProcessingFailure(currentMessageInfo, errors.Last); } catch (Exception moduleException) { errors.Add(moduleException, "Module failed to process message failure"); } } } If for some reason I did screw up the logic and we need to call the completion handler from our Transaction handler we can simple add to the CallHandlerAndCommit method a third argument to the MessageCompletionHandler and we are fine again. If the logic becomes even more complex and we need to ensure that the completed event is triggered only once we have now one place the completion handler to capture the state. During this refactoring I simple put things together that belong together and came up with useful abstractions. If you look at the original argument list of the HandleMessageCompletion method I have put many things together: Original Arguments New Arguments Encapsulate Message message CurrentMessageInformation messageInfo Message message TransactionScope tx Action<CurrentMessageInformation> beforeTransactionCommit OpenedQueue messageQueue TransactionHandler transactionHandler TransactionScope tx OpenedQueue messageQueue Action<CurrentMessageInformation> beforeTransactionCommit Exception exception, ErrorCollector errors Action<CurrentMessageInformation, Exception> messageCompleted MessageCompletionHandler handler Action<CurrentMessageInformation, Exception> messageCompleted Action<CurrentMessageInformation, Exception> messageProcessingFailure The reason is simple: Put the things that have relationships together and you will find nearly automatically useful abstractions. I hope this makes sense to you. If you see a way to make it even more simple you can show Ayende your improved version as well.

Search Results

Search found 15055 results on 603 pages for 'volume shadow copy'.

Page 229/603 | < Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236 | Next Page >

- by Noctis Skytower

- by Noctis Skytower

- by Noctis Skytower

- by PCGIZMO

- by Maulrus

- by edalorzo

- by azz0r

- by Noctis Skytower

- by xmpirate

- by Darel

- by Godeke

- by ???

- by rich

- by Hosam Kamel

- by rfkrocktk

- by prosseek

- by pinaldave

- by Matthew Guay

- by Mark Virtue

- by Quandary

- by James Michael Hare

- by jp2code

- by Alois Kraus

< Previous Page | 225 226 227 228 229 230 231 232 233 234 235 236 | Next Page >