Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 23/97 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• WOL for Asus M5A97 built in Realtek Network Adapter

  - by madphp

  I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

  Read the article

• Can't re-install OS on Asus Eee PC 1018P

  - by cornerback84

  My friend has an Asus Eee PC 1018P. It has no CD/DVD drive (neither does he have a USB CD/DVD drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But mid way through the installation it was interrupted and the computer was restarted (not a hardware or software issue – we did it). Now we cannot run the backup and we also tried to install Windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs a USB device driver to continue. It has USB 3.0 – maybe that's why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't run and when booting from USB, it says that it needs a device driver. Anyone has any idea what we could do?

  Read the article

• Disable SSD in ASUS 900 running Ubuntu 9.10

  - by ashays

  Recently I managed to completely mess up my ASUS 900, but I have no immediate desire to upgrade since it's only my travel laptop (and I'm waiting for a few months to see if anything interesting comes out). For now, though, I've hit an interesting problem. The 4GB SSD that is soldered onto the motherboard is broken. Since it's soldered on, there's really no hope of replacing it (I believe), so I've been solely running off the 16GB that is inserted into the mini pci-e slot. But since it can't read from the SSD it keeps giving me an error every time it tries to boot and read the ssd. Is there any way to either force Ubuntu to not check the drives on boot or disable the drive altogether, so that I don't have to sit through a 5 minute boot process each time I want to use the computer?

  Read the article

• Installed ASUS HD4670, now unable to install ANY Debian due to low memory corruption

  - by Alfabravo

  I have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP. I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( ) Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like: ... [ 1.957161] [] rb_erase+0xd6/0x160 [ 1.957266] [] page_fault+0x25/0x30 Could it be something about this new video card having ddr3?

  Read the article

• Why can’t two programs access my webcam simultaneously?

  - by qdii

  I first launch cheese and my webcam turns on. I then run vlc to grab the output of /dev/video0 but it fails with: [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3eb4000b78] main input error: open of `v4l2:///dev/video0' failed Whatever pair of video programs I run (skype, cheese, vlc, etc.), the result is always the same: the second program can no longer use the webcam when the first one has already grabbed the output. However I find it curious as video4linux states: In general, V4L2 devices can be opened more than once. When this is supported by the driver, users can for example start a "panel" application to change controls like brightness or audio volume, while another application captures video and audio. My webcam is seen in lspci as 058f:a014 Alcor Micro Corp. Asus Integrated Webcam, but I don’t even know what the underlying driver is, so I can’t check whether my problem is driver-related or not. Any input would be more than welcome!

  Read the article

• charging light on in laptop with battery removed.

  - by Jus12

  I hope this is the right place for this question. I have an LG R310 laptop. Recently the adapter connector started playing up, so I got a second hand replacement adapter of the same rating. The adapter was a cheap type (I know I made a mistake) and faulty.. it made a low buzzing sound when plugged in and not connected to the laptop. It didn't make the noise when connected to the laptop. Foolishly I used this adapter for several weeks. One day the adapter stopped working. The led didnt work and it was not charging. It had also drained the laptop's battery to 0%. I then got an original replacement adapter. Now I can use the laptop on power but the battery does not charge. The charging light does not come on. The interesting thing is that when I remove the battery the charging light comes on and stays on after I insert the battery back (the battery still does not charge). I need to know if the faulty adapter damaged the motherboard or if its just a problem with the battery. I have a multimeter and I prefer not to open the laptop. Thanks in advance.

  Read the article

• Asus G53SX How to use the recovery partition

  - by Amento

  I am trying to use the recovery partition on my Asus G53SX laptop, but the instructions in the included booklet don't match up with what happens on the computer. It says press F9 during bootup and then press ENTER to select windows setup. Then select the language you want to recover, and so on. When I press F9 I end up in the boot manager and from there I can access safe mode and all these things. The closest thing I can find in this list is "Repair your computer" but this menu takes me to recovery points and backup images, none which are mentioned in the booklet. How can I use the recovery partition to restore my laptop to factory state?

  Read the article

• Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

  - by PhantonTurtle

  I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

  Read the article

• SATA HDD stuttering on reads (LED on)

  - by jdehaan

  I hope I can get some new ideas to solve the issue. What I have: AMD Phenom II X4 905e Box, Sockel AM3 Gigabyte GA-MA790XTA-UD4, AMD 790X, AM3 ATX WD Caviar GreenPower 1,5TB SATA II 4GB Kit OCZ DDR3 PC3-10666 Platinum Low-Voltage CL7 HIS HD 4670 iSilence4 DDR3 1024MB Native HDMI Dual-DVI, PCI-Express Behavior: Everything works normally excepting the HDD accesses. The drive seems to get stuck in reading data (LED drive by Mainboard is on for a while) then recovers and goes on. There is a delay of more than 30s sometimes. Often it is a matter of 5-10s. This does not seem related to the workload of the disk. What I tried so far: Use different SATA port: I switched from the SATA3 to SATA2 then the SATA driven by the CPU, no difference. Turned AHCI off, drove the SATA in IDE mode, same behavior, now I felt like the HDD has problems Deactivated energy saving settings (BeQuiet, ...), disabled 3 CPUs (msconfig) supposing some race condition or trouble with changing freqs, same trouble With Windows7 Professional 64Bit, I installed the hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B976418&x=8&y=9 with no success. The problem description matches what I experienced, so I felt lucky but was quite in a sad mood after being deceived. Burned the DLG 5.04f DataLifeGuard CD from WD to check the drive. All tests passed, to my surprise! Installed an Ubuntu on the same drive i386 flavour. Drive still in IDE mode, exactly the same behavior. So the OS does not matter. What I did not try yet: http://www.gigabyte.eu/Support/Motherboard/BIOS_Model.aspx?ProductID=3263 I have a F2 BIOS and there is a F3a Beta, did someone have similar issues that were solved by this update? It is a beta so I fear upgrading a bit and I could find no release notes at all on the net, not really serious work maybe they had issues translating from Chinese??? Using another HDD drive Does someone have other hints or a similar issue? Maybe it is neither the HDD nor the Mainboard/BIOS?

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• A minimal Linux distribution for my ASUS EEE PC

  - by Andrioid

  I recently bought myself a ASUS EEE 1000HE and I intend to use it for note-taking and light browsing at the University. The machine has a 10" screen so the interface needs to be very compact. I've already tried: EEEbuntu: Very nice driver support and out of the box experience. But I feel that it is too slow booting and the general experience is too heavy in my opinion. Moblin 2: Looks very cool, boots just fine but is way too unstable to use. Also find it annoying that I can't find hotkey documentation anywhere. Any Netbook OS recommendation welcome (although those specific to my model would be great). There is an entire jungle of distributions out there, so if you've been on a safari, please share your experience.

  Read the article

• BIOS unable to boot CD or Hard Drive

  - by Gabriel

  Motherboard Intel DQ35MP. HDD Caviar Green 1TB. I'm having problems with my BIOS and/or hard drive/disc drive. Came back from a trip, booted my computer, and realized that the BIOS wasn't booting anymore, just a black screen with no beep sounds. Only fans and lights on. Then I thought it might be caused by the video card, I removed it, and still no BIOS screen. Then I removed the hard drive and voila BIOS screen is back again. If the hard drive is defective then I can check that with a Rescue Disk. I inserted the CD on the Disc Tray but the computer did not respond to it, the screen freezes in black with an "E7" string at the bottom right corner just after the BIOS screen, this happens with or without discs. BIOS settings are set to default, and CD reading is on top of the boot device list. EDIT I removed the BIOS battery, rebooted the CPU, the BIOS screen showed up, and then it freezed in E7. Placed the BIOS batttery, rebooted and same thing, we are stuck with the E7 string. I uploaded a video to illustrate the problem http://www.youtube.com/watch?v=13jPdBcIrBU

  Read the article

• Custom firmware for Asus WL-520g

  - by Jaroslav Záruba

  What custom firmware works with Asus WL-520g? (Note this is not 520gU, 520gC, etc.) I failed to flash it with Tomato (Tomato_1_28_ND.zip) - the admin UI does not accept the file, and when trying to tftp the file as adviced for 520gU all I get is this: Transfering file tomato-ND.trx to server in octet mode... Error occurred during the file transfer (Error code = 0): Error in SendPacket() call. I just saved the router form rather unsuccessful flash to DD-WRT (after few hours the router fell into coma), and I'd like to keep it as a backup should the new one die or whatever. (Unfortunately the stock firmware does not support WOL.)

  Read the article

• Built-in webcam on Asus laptop missing under imaging devices in Windows 7

  - by dave

  My built-in webcam for U43JC Asus laptop (Windows 7 32 bit) did not work, saying The camera is being used by another program. I searched on the net to solve the problem and the solution that seemed to be working was to remove usb2.0 uvc 1.3m webcam and restart the computer and the webcam will automatically re-install. However, not only did the webcam not re-install automatically, but the webcam is still not working. Things have gotten only worse that now I'm missing the webcam under Imaging Devices. I even tried recovering Windows to the factory state, however, the webcam was still missing. What can I do to restore my usb2.0 uvc 1.3m webcam?

  Read the article

• Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

  - by John Chadwick

  This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

  Read the article

• Asus z53 laptop overheating problem

  - by Tiberiu Hajas

  hi all, wondering if anyone encountered overheating of asus laptop ? especially the z53 model ? usually the right side of the laptop and vent in the upper corner is blowing hot air when under even minimal load, the CPU temperature can easily get to 65-70C and GPU is even above 80C. I'm using NHC (notebook health control) to set to a higher conservatory power consumption but that helps only a bit, anyone opened up the case ? wondering is require a dust clean ...etc ? I still have some warranty on it. thanks

  Read the article

• Factory Reset Asus

  - by Ben

  I have an ASUS All-in-one PC (not sure what model) and I'm trying to perform a Factory Restore but nothing is working yet. I have tried pressing F8, all I had access to was "Restore from an earlier point" - Today was the earliest point; and "Restore from an Image" - which I don't have. I have tried pressing F9, F10, and F11, but all that brought me was options to Start Windows normally, Run a system diagnostic, or try other options (F8 menu). I don't have any other discs to restore from or anything, and I have found a tutorial to try and create a Partition(?) to load the restore from that. Does anyone have any other ideas?

  Read the article

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• ASUS EeePC 1001PX, hard disk clicking in Ubuntu Maverick

  - by MeanEYE

  I just received my new Asus EeePC 1001px netbook. After installing Ubuntu 10.10 on it, I've noticed that my hard drive is making a clicking noise. Now this is not a loud clicking noise nor it's constant (only sounds occasionally and when hard disk is not writing or reading anything). Another strange thing is, this only happens when netbook is using battery power, the moment I plug in AC power clicking stops. Additionally I noticed that when I go into BIOS I can hear the click only once, same thing happens if I boot Ubuntu from USB. That led me to believe the problem is within operating system. I did all the surface scans and SMART tests and everything seems to be fine. Now noise sounds like heads are trying to "park" themselves so I tried disabling "spin down" option in Power Management but it didn't help. Any idea?

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Asus laptop not retaining Aero theme when unplugged

  - by expiredninja

  The problem i'm having occurs when i unplug my laptop, it disregards several elements of my theme. The taskbar becomes unlocked. My desktop background is turned white. The transparency on my windows goes away. I can fix these things by running the Aero trouble shooting utility, which mentions something about the color bit depth These are these specs for the computer: Asus Laptop / Intel® Pentium® Processor / 15.6" Display / 4GB Memory Model: X54H-BD3MA SKU: 4005394 I'm sure there are duplicates of this, just not sure whick one refers to me. Thank you. Also i think someone should add an "unplugged" tag.

  Read the article

• New PC: win7 install issues with 2x3TB in RAID1

  - by goober

  Background / Components Not sure what I've done wrong. Built one PC before successfully in a similar way but this one seems to be struggling. I have the following components: ASUS P8Z68-V/Pro Gen 3 (updated to latest firmware) 16GB (2x8GB) RAM corsair hx850 power supply 2x3TB drives on the intel z68 controller 1x128GB SSD on the Marvel controller sapphire 7950 The problem I set up my 3 TB disks in RAID1 controller appears to recognize them fine during boot as one 2.7TB raid1 volume windows setup sees two disks, both 746 GB, but will only let me install to one and appears to work fine. windows appears to install fine after installer reboots, I receive "windows failed to start" error referencing code 0xc000000e and "\Windows\system32\winload.exe every time I do an install, a new additional "win7" entry is added to the boot menu; all lead to this error. What I've tried: updated the BIOS to the latest firmware attempted to repair the install tried clearing / removing raid / re-raiding drives tried formatting the drives during install attempted to clear the menu Of entries (can't figure out how to do that) No matter how many times I destroy the raid array, format the disks, etc. the boot entries keep piling up. Any idea where I'm going wrong?

  Read the article

• my cpu won't start. all fan were spinning for a second then nothing happen

  - by Tommy

  I need help about this.. I'm from Malaysia.. Back then my cpu is all okay..and it's 4 year old.. I think this question is answered before but i'm still don't understand.. when i plugged my cpu..turn it on and all of the fan (graphic card, mobo fan and PSU fan) were spinning just for a second than nothing happen.. I don't know if it is because of the PSU or my mobo.. I sent my cpu to the shop and they said it must be the mobo.. They tell me to change my mobo and PSU also..and it cost over 100 buck (rm300 in Malaysia). and i'm real 'dry' right now. My whole data is inside the HDD. School projects, photos, games, and many..I really-really need my cpu back alive.. My mobo is MSI MS-7529 with dual core chips. My PSU is ATX-480W. the PC store guy said i need to change to new ASUS mobo if I want. I dont know what type it is but Then he tell me to change my PSU also because he don't think my old PSU (ATX-480W) ain't compatible to the new mobo.. I was very need a help from you techie guys.. sorry for my terrible English..

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >