Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 26/97 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• Problem with bios update on Intel S3420GP

  - by wurlog

  I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

  Read the article

• p7h55-m/usb3 blue screen ?

  - by winterwindz

  hi im not sure if this is the right place to ask but, i just build a new desktop for gaming. i3 530 2.93 GHz P7H55-M/USB3 Corsair Vengeance 4GB 1600MHz iGame Gtx 460 Win 7 32bit Huntkey X7 900W Everytime i start the computer it would run normally until the windows loading and will just stuck and hit the blue screen.i tried everypossible way to repair,restore the windows but nutin seems to be working. I'm not sure if its compatibility problem or Bios or even Ram,since the beep is a normal beep and will only blue screen when loading the windows. if anyone can help me id appriciate it. thx

  Read the article

• What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

  - by tinkerer

  Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

  Read the article

• PSU failing or Mainboard failing?

  - by Andrei Rinea

  I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

  Read the article

• When Intel/AMD plan to use new CPU sockets? [closed]

  - by psihodelia

  It is very expensive always to use most modern hardware especially buying new mainboard if only a new CPU is desired. It would be much better if one knows whether and when major CPU producers plan to change CPU sockets. Do you know when it is planed to change sockets the next time? I am particularly interested in not buying Intel i7 CPU if a new CPU will be released soon with not compatible pins.

  Read the article

• Should I get integrated graphics if I already have a dedicated GPU?

  - by Ivo Flipse

  I want to upgrade my computer to the new Sandy Bridge CPU's, which features integrated graphics. However, you have to choose between two types of chipsets: H67 or P67. Now since I already own a GTX 460, so is there any added value to using the integrated graphics? Would there be a way of 'disabling' my GPU when I don't need it's additional power or would the integrated graphics simply allow me to add another screen?

  Read the article

• Role of a bus bridge

  - by Wayne

  Simple question: What is the role of a bus bridge?

  Read the article

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Where can I buy Server Type Motherboards with more than 2 Processor Sockets?

  - by roygbiv

  I'm looking for server type motherboards that have more than 2 processor sockets. Where can I find these types of boards? Edit - Prefer Intel Xeon based if possible, however, AMD Opteron is ok too.

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• Why am I seeing Zero errors in non-ECC RAM?

  - by Alexander Shcheblikin

  According to sources, memory errors are a very probable event: Some say the probability of a DRAM error is 95% in just 3 days of operation of a computer with just 4 GB of RAM, others say 32% of servers experience at least one error in a month with 8% of DIMMs being at fault. Contrary to those horrors, in my more than 10 years of personal computers use I have seen exactly none of the memory errors. I admit I never paid special attention to the subject. However, I have ventured multi-hour memtest86 runs couple of times and never seen an error either. Some of the factors that IMO should aggravate the memory problems: I build my computers out of the most "bulk commodity" parts: mainstream budget motherboards and the next to cheapest memory. also I usually max out the technology available, e.g. in the times of 32 bit OS'es I used 4 GB of RAM and with the current desktop CPUs and the newer 64 bit OS'es I use 32 GB of RAM. memory usage is moderately heavy with lots of virtual machines up running small and big tasks 24/7/365. But nevertheless, no memory-related problems ever found! How's that?

  Read the article

• USB 2.0 Options for board with USB 1.1

  - by Wesley

  Hi all, I have a QDI Superb 4 board and, by default, it supports USB 1.1. However, I want it to support USB 2.0. How can I go about doing this? I know there are PCI expansion cards with USB 2.0 and there are also 3.5" floppy replacement panels with USB 2.0. Will these be supported by the board or will it be downgraded to USB 1.1? If so, are there better options than those already mentioned? Thanks in advance.

  Read the article

• New MOBO + old Harddrive = NO BOOT

  - by rm

  My old mobo died, i bought a new one and swapped it. Plugged my old Harddrive and fired it up. I get a POST screen, the Windows logo ... and then the system restarts. Any ideas?

  Read the article

• Computer only booting after POWER ON/OFF 10 times or more?

  - by Jan Gressmann

  Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• List of recent motherboards with BIOS / without UEFI [on hold]

  - by jmn

  I am building a new desktop PC and I want to have full disk encryption on it. TrueCrypt doesn't support UEFI as of now. Are there still recent motherboards out there without UEFI ? I didn't find any list and I am afraid that I will have to study each potential candidate's technical sheet before purchase. I want to buy 2 or 3 of the same model to be future proof. Newegg links will not help, I don't live in the USA ... this means that this post is a legitimate target for PRISM ;-) Thanks for your help.

  Read the article

• Looking for Mini itx board suitable for hooking up to a television.

  - by Jaxsun

  I am building a small computer to hook up to my tv for playing some games and playing media. I would like to find a board with both HDMI and standard RCA hookups that would be powerful enough to play full HD video (if it has an embedded cpu). I came across the VIA VB8003 which seemed to fit my needs but it doesn't seem to be widely available. Any help would be greatly appreciated, thank you.

  Read the article

• GA-P55A-UD4 SYSFAN 2 problem....

  - by Vit

  Hi, I have some strange problems with the mobo in title. I have two fans connected to SYSFAN 1 and 2. Both are the same temp regulated Arctic Cooling F12. They are regulated thru temp sensor which is in different cable from fan. It connects to the 3 pin. So, I connected them to SYSFAN 1 and 2 MB ports. The problem is, when PC starts, the fan connected to SYSFAN 1 spins nice and is reporting speed to BIOS. But second fan connected to SYSFAN 2 starts to spin, than stops. I tried to warm the sensor with no help. Also, in BIOS I found no feature about SYSFAN 2 mode or something. I tried the fan itself by connecting it to PWR fan connector and it works fine. But obviously I want it to operate in SYSFAN 2. Please if you have any advice, help. Thanks.

  Read the article

• New mainboard for Shuttle

  - by Dave Arkell

  I have an old Shuttle barebones SN21G5 (AMD 64), and I really need a more modern chip in there. Is there a way of swapping out the old mainboard and putting in one of those new fangled phenom mainboards in there?

  Read the article

• Building a workstation computer for Image processing? [closed]

  - by echolab

  I am taking a gigapixel image my goal is 50gigapixel and shooting is almost done , i am doing some research to build a workstation so i can stitch images together , my questions is ! Could u suggest some dual cpu mainboard that works fine with xeon 5500+ , with 64GB+ ram support ? My other question is which hardware is most important in image processing , all i see in story of gigapixel panoramas is they have dual xeon and 32gb+ ram ? i wonder if i am doing this right , i mean they don't post information on graphic card , mainboard and stuff ! I did asked several websites , but nothing best answer was get some high-end workstation and plenty of hours , i don't want to purchase ready to use workstations, i wanna build it up Thanks in advance

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• Suppliers for revision-controlled hardware, long-life motherboards?

  - by jacobsee

  Has anyone had good experience with suppliers of industrial computers, specifically 'long-life, revision-controlled' motherboards? I'm found a couple of likely candidates including ITOX, BCM, and DuroPC but haven't been able to find much in the way of independent review. I'm currently using off the shelf motherboards for an industrial data-acquisition system and am trying to eliminate the problem of rapid turnover/obsolescence of motherboards.

  Read the article

• Laptop does not charge old or new battery with Old and New AC adapters.

  - by Jeff

  My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

  Read the article

• Any way to tell apart a CPU defect from a mainboard defect?

  - by Pekka

  I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >