Search Results

Search found 2385 results on 96 pages for 'credit cards'.

Page 23/96 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • DevConnections Slides and Samples Posted

    - by Rick Strahl
    I’ve posted the slides and samples to my DevConnections Sessions for anyone interested. I had a lot of fun with my sessions this time around mainly because the sessions picked were a little off the beaten track (well, the handlers/modules and e-commerce sessions anyway). For those of you that attended I hope you found the sessions useful. For the rest of you – you can check out the slides and samples if you like. Here’s what was covered: Introduction to jQuery with ASP.NET This session covered mostly the client side of jQuery demonstrated on a small sample page with a variety of incrementally built up examples of selection and page manipulation. This session also introduces some of the basics of AJAX communication talking to ASP.NET. When I do this session it never turns out exactly the same way and this time around the examples were on the more basic side and purely done with hands on demonstrations rather than walk throughs of more complex examples. Alas this session always feels like it needs another half an hour to get through the full sortiment of functionality. The slides and samples cover a wider variety of topics and there are many examples that demonstrate more advanced operations like interacting with WCF REST services, using client templating and building rich client only windowed interfaces. Download Low Level ASP.NET: Handlers and Modules This session was a look at the ASP.NET pipeline and it discusses some of the ASP.NET base architecture and key components from HttpRuntime on up through the various modules and handlers that make up the ASP.NET/IIS pipeline. This session is fun as there are a number of cool examples that demonstrate the power and flexibility of ASP.NET, but some of the examples were external and interfacing with other technologies so they’re not actually included in the downloadable samples. However, there are still a few cool ones in there – there’s an image resizing handler, an image overlay module that stamps images with Sample if loaded from a certain folder, an OpenID authentication module (which failed during the demo due to the crappy internet connection at DevConnections this year :-}), Response filtering using a generic filter stream component, a generic error handler and a few others. The slides cover a lot of the ASP.NET pipeline flow and various HttpRuntime components. Download Electronic Payment Processing in ASP.NET Applications This session covered the business end and integration of electronic credit card processing and PayPal. A good part of this session deals with what’s involved in payment processing, getting signed up and who you have to deal with for your merchant account. We then took a look at integration of credit card processing via some generic components provided with the session that allow processing using a unified class interface with specific implementations for several of the most common gateway providers including Authorize.NET, PayFlowPro, LinkPoint, BluePay etc. We also briefly looked at PayPal Classic implementation which provides a quick and cheap if not quite as professional mechanism for taking payments online. The samples provide the Credit Card processing wrappers for the various gateway providers as well as a PayPal helper class to generate the PayPal redirect urls as well as helper code for dealing with IPN callbacks. Download Hope some of you will find the material useful. Enjoy.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

    Read the article

  • Unleash the Power of Cryptography on SPARC T4

    - by B.Koch
    by Rob Ludeman Oracle’s SPARC T4 systems are architected to deliver enhanced value for customer via the inclusion of many integrated features.  One of the best examples of this approach is demonstrated in the on-chip cryptographic support that delivers wire speed encryption capabilities without any impact to application performance.  The Evolution of SPARC Encryption SPARC T-Series systems have a long history of providing this capability, dating back to the release of the first T2000 systems that featured support for on-chip RSA encryption directly in the UltraSPARC T1 processor.  Successive generations have built on this approach by support for additional encryption ciphers that are tightly coupled with the Oracle Solaris 10 and Solaris 11 encryption framework.  While earlier versions of this technology were implemented using co-processors, the SPARC T4 was redesigned with new crypto instructions to eliminate some of the performance overhead associated with the former approach, resulting in much higher performance for encrypted workloads. The Superiority of the SPARC T4 Approach to Crypto As companies continue to engage in more and more e-commerce, the need to provide greater degrees of security for these transactions is more critical than ever before.  Traditional methods of securing data in transit by applications have a number of drawbacks that are addressed by the SPARC T4 cryptographic approach. 1. Performance degradation – cryptography is highly compute intensive and therefore, there is a significant cost when using other architectures without embedded crypto functionality.  This performance penalty impacts the entire system, slowing down performance of web servers (SSL), for example, and potentially bogging down the speed of other business applications.  The SPARC T4 processor enables customers to deliver high levels of security to internal and external customers while not incurring an impact to overall SLAs in their IT environment. 2. Added cost – one of the methods to avoid performance degradation is the addition of add-in cryptographic accelerator cards or external offload engines in other systems.  While these solutions provide a brute force mechanism to avoid the problem of slower system performance, it usually comes at an added cost.  Customers looking to encrypt datacenter traffic without the overhead and expenditure of extra hardware can rely on SPARC T4 systems to deliver the performance necessary without the need to purchase other hardware or add-on cards. 3. Higher complexity – the addition of cryptographic cards or leveraging load balancers to perform encryption tasks results in added complexity from a management standpoint.  With SPARC T4, encryption keys and the framework built into Solaris 10 and 11 means that administrators generally don’t need to spend extra cycles determining how to perform cryptographic functions.  In fact, many of the instructions are built-in and require no user intervention to be utilized.  For example, For OpenSSL on Solaris 11, SPARC T4 crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "t4 engine."  For a deeper technical dive into the new instructions included in SPARC T4, consult Dan Anderson’s blog. Conclusion In summary, SPARC T4 systems offer customers much more value for applications than just increased performance. The integration of key virtualization technologies, embedded encryption, and a true Enterprise Operating System, Oracle Solaris, provides direct business benefits that supersedes the commodity approach to data center computing.   SPARC T4 removes the roadblocks to secure computing by offering integrated crypto accelerators that can save IT organizations in operating cost while delivering higher levels of performance and meeting objectives around compliance. For more on the SPARC T4 family of products, go to here.

    Read the article

  • LSI SAS 9240-8i on Ubuntu 12.04 Hangs on Modprobe

    - by Francois Stark
    I used the LSI 9240-8i card on a smaller Intel motherboard with no problems in Ubuntu, with ZFS. However, we rebuilt the server to allow for more disks, using the ASROCK X79 Extreme 11 motherboard. It has 7 PCIe slots, and a LSI 2008 on-board. At first I thought the LSI 9240, when plugged in to PCIe, clashed with the on-board LSI 2008. Every time I plugged in the LSI 9240, modprobe would hang. Then I completely disabled the on-board LSI 2008, and the problem persisted. Last night it booted perfectly ONCE - all LSI cards and connected disks visible... However, all subsequent reboots failed. Both LSI cards' bios scans appear and they both see the disks connected to them, but Ubuntu modprobe hangs. Some selected dmesg lines, with both LSI cards enabled: [ 190.752100] megasas: [ 0]waiting for 1 commands to complete [ 195.772071] megasas: [ 5]waiting for 1 commands to complete [ 200.792079] megasas: [10]waiting for 1 commands to complete [ 205.812078] megasas: [15]waiting for 1 commands to complete [ 210.832037] megasas: [20]waiting for 1 commands to complete [ 215.852077] megasas: [25]waiting for 1 commands to complete [ 220.872072] megasas: [30]waiting for 1 commands to complete [ 225.892078] megasas: [35]waiting for 1 commands to complete [ 230.912086] megasas: [40]waiting for 1 commands to complete [ 235.932075] megasas: [45]waiting for 1 commands to complete [ 240.306157] usb 2-1.5: USB disconnect, device number 7 [ 240.952076] megasas: [50]waiting for 1 commands to complete [ 240.960034] INFO: task modprobe:233 blocked for more than 120 seconds. [ 240.960055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.960067] modprobe D ffffffff81806200 0 233 146 0x00000004 [ 240.960075] ffff880806ae3b48 0000000000000086 ffff880806ae3ae8 ffffffff8101adf3 [ 240.960083] ffff880806ae3fd8 ffff880806ae3fd8 ffff880806ae3fd8 0000000000013780 [ 240.960090] ffffffff81c0d020 ffff880806acae00 ffff880806ae3b58 ffff880808961720 [ 240.960096] Call Trace: [ 240.960107] [<ffffffff8101adf3>] ? native_sched_clock+0x13/0x80 [ 240.960116] [<ffffffff816579cf>] schedule+0x3f/0x60 [ 240.960137] [<ffffffffa00093f5>] megasas_issue_blocked_cmd+0x75/0xb0 [megaraid_sas] [ 240.960144] [<ffffffff8108aa50>] ? add_wait_queue+0x60/0x60 [ 240.960154] [<ffffffffa000a6c9>] megasas_get_seq_num+0xd9/0x260 [megaraid_sas] [ 240.960164] [<ffffffffa000ab31>] megasas_start_aen+0x31/0x60 [megaraid_sas] [ 240.960174] [<ffffffffa00136f1>] megasas_probe_one+0x69a/0x81c [megaraid_sas] [ 240.960182] [<ffffffff813345bc>] local_pci_probe+0x5c/0xd0 [ 240.960189] [<ffffffff81335e89>] __pci_device_probe+0xf9/0x100 [ 240.960197] [<ffffffff8130ce6a>] ? kobject_get+0x1a/0x30 [ 240.960205] [<ffffffff81335eca>] pci_device_probe+0x3a/0x60 [ 240.960212] [<ffffffff813f5278>] really_probe+0x68/0x190 [ 240.960217] [<ffffffff813f5505>] driver_probe_device+0x45/0x70 [ 240.960223] [<ffffffff813f55db>] __driver_attach+0xab/0xb0 [ 240.960227] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960233] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960237] [<ffffffff813f436c>] bus_for_each_dev+0x5c/0x90 [ 240.960243] [<ffffffff813f503e>] driver_attach+0x1e/0x20 [ 240.960248] [<ffffffff813f4c90>] bus_add_driver+0x1a0/0x270 [ 240.960255] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960260] [<ffffffff813f5b46>] driver_register+0x76/0x140 [ 240.960266] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960271] [<ffffffff81335b66>] __pci_register_driver+0x56/0xd0 [ 240.960277] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960286] [<ffffffffa001e09e>] megasas_init+0x9e/0x1000 [megaraid_sas] [ 240.960294] [<ffffffff81002040>] do_one_initcall+0x40/0x180 [ 240.960301] [<ffffffff810a82fe>] sys_init_module+0xbe/0x230 [ 240.960307] [<ffffffff81661ec2>] system_call_fastpath+0x16/0x1b [ 240.960314] INFO: task scsi_scan_7:349 blocked for more than 120 seconds.

    Read the article

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • Isis Finally Rolls Out

    - by David Dorf
    Google has rolled their wallet out for several chains; I see the NFC readers in Walgreen's when I'm sent their for milk.  But Isis has been relatively quiet until now.  As of last week they have finally launched in their two test cities: Austin, and Salt Lake City.  Below are the supported carriers and phones as of now, but more phones will be added later. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AT&T supports: HTC One™ X, LG Escape™, Samsung Galaxy Exhilarate™, Samsung Galaxy S® III, Samsung Galaxy Rugby Pro™ T-Mobile supports: Samsung Galaxy S® II, Samsung Galaxy S® III, Samsung Galaxy S® Relay 4G Verizon supports: Droid Incredible 4G LTE. Of course iPhone owners have no wallet since Apple didn't included an NFC chip. To start using Isis, you have to take your NFC-capable phone to your carrier's store to get the SIM replaced with a more sophisticated one that has a secure element configured for Isis.  The "secure element" is the cryptographic logic that secures mobile payments.  Carriers like the secure element in the SIM while non-carriers (like Google) prefer the secure element in the phone's electronics. (I'm not entirely sure if you could support both Isis and Google Wallet on the same phone.  Anybody know?) Then you can download the Isis app from Google Play and load your cards.  Most credit cards are supported, and there's a process to verify the credit cards are valid.  Then you can select from the list of participating retailers to "follow."  Selecting a retailer allows that retailer to give you offers via the app. The app is well done and easy to use.  You can select a default payment type and also switch between them easily.  When the phone is tapped on the reader, there are two exchanges of information.  The payment information is transferred, and then the Isis "SmartTap" information which includes optional loyalty number and digital coupons.  Of course the value of mobile wallets comes from the ease of handling all three data types (i.e. payment, loyalty, offers). There are several advertisements for Isis running now, and my favorite is below.

    Read the article

  • Sd card bigger than 2gb is not recognized in ubuntu 12.04

    - by dex1
    When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

    Read the article

  • Best triple head display setup

    - by dgel
    I'm currently running Ubuntu 12.04 with a darn good triple head display setup. I've got a VisionTek 900530 Radeon HD 5450 512MB DDR3 PCI Express video card that has two DVI outputs and one Mini DisplayPort that I have connected to a HDMI adapter. I'm running three identical Asus 1920x1080 monitors that each have a DVI, VGA, and HDMI input. I'm using the xorg-edgers ppa, so I'm using the open source radeon driver version 6.99.99. I tried using the ATI binary fglrx driver, but I wasn't able to get the three monitors working properly- the monitor connected via HDMI / DisplayPort wouldn't run at full resolution. The setup is almost perfect: Compiz runs fine and is quite snappy. I'm not able to use that great compiz feature where you can drag a window to the side of a display and it will half maximize. I occasionally experience display corruption weirdness with Unity and need to restart it. When I use a dropdown menu in LibreOffice it often pops the menu down in another window. For example, if I'm using the center monitor and click the Insert menu, the menu pulls down on the monitor to my right, forcing me to chase it. If I chase down the menu and choose Manual Break, the dialog appears over on my left monitor. This absurdity is mildly entertaining but has lost its novelty. I've decided to build a new system and have spared no expense- latest i7 processor, SSD, etc. I really like the performance of the Nvidia binary drivers, so I put two ZOTAC ZT-40707-10L GeForce GT 440 in the system, figuring I'd have four DVI outputs and an awesome triple (or even eventually quad) head setup. Unfortunately it appears that I didn't do sufficient research before my purchase. It seems that Nvidia TwinView only supports two monitors on one card (I guess that's why they call it TwinView...). I messed around with running two X servers, but I really don't want that- being able to drag windows to any monitor is critical. It doesn't sound like Xinerama is an option because from what I understand it simply doesn't support Compiz. I've seen a BaseMosaic option that can be used with the Nvidia drivers that appears to support an almost unlimited number of heads- unfortunately me cheap little cards don't support it. I'm also not sure whether you'll still have all nice maximizing and snapping that TwinView provides, or whether Ubuntu will only see it as one massive display. I put my old trusty ATI card into my new system and installed 12.10. I'm using the opensource radeon drivers again because even in 12.10 I can't get the fglrx binary drivers to do triple head. Unfortunately, even with an unbelievably powerful system the experience is extremely sluggish (much more so than my experience in 12.04). The menu scattering problem appears to be fixed, but I get a lot of nasty Unity display corruption. So finally, my question is this: What hardware / drivers should I use? I'm willing to buy (almost) any video card(s). I have two PCI-Express 3.0 slots on my motherboard (which has an integrated Intel HD card). I'm willing to use ATI or Nvidia cards and willing to run Ubuntu 12.04.1 or 12.10. I'm not a gamer, but do want beautiful and snappy Compiz effects. Does anyone out there have the perfect triple head setup in 12.04 or 12.10? What hardware / drivers are you using? I have those two Nvidia cards but will probably be returning them unless someone knows a way to use them together for a triple head setup. Since I'm having pretty good luck with a single ATI card providing three displays, should I just buy a beefier one with the hopes that it will fix the horrible sluggishness I'm experiencing in 12.10?

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • Concat LPSTR in C++

    - by Cat Man Do
    Trying to use as basic C++ as I can to build a list of numbers from 1-52 in a random order (deck of cards). Unfortauntely, all my attempts to concat the strings and get a result end in failure. Any suggestions? NOTE: This is not homework it's something I'm using to create a game. // Locals char result[200] = ""; // Result int card[52]; // Array of cards srand(time(0)); // Initialize seed "randomly" // Build for (int i=0; i<52; i++) { card[i] = i; // fill the array in order } // Shuffle cards for (int i=0; i<(52-1); i++) { int r = i + (rand() % (52-i)); int temp = card[i]; card[i] = card[r]; card[r] = temp; } // Build result for (int c=0; c<52; c++) { // Build sprintf(result, "%d", card[c]); // Comma? if ( c < 51 ) { sprintf(result, "%s", ","); } } My end result is always garbled text. Thanks for the help.

    Read the article

  • PayPal: IPN vs PDT

    - by Tom
    Hi, I'm having some trouble choosing between PayPal's Instant Payment Notification (IPN) and Payment Data Transfer (PDT). Basically, users buy a one-off product on my site, pay on PayPal, and return to my site. I understand how IPN works but I'm now seeing that I might be able to trigger the various actions that take place after a successful purchase more easily with PDT, as the data gets returned there and then (as opposed to needing a separate listener). However, PayPal's PDT documentation contains this cryptic line: "PDT is not meant to be used with credit card or Express Checkout transactions." ... but I can't find anything further whatsoever on the topic. (1) Are credit cards REALLY not meant to be used with PDT? I would like more than a sentence. (2) Does that mean that a user must have/create a PayPal account to pay? (3) Does it mean that if I want to allow users to pay with their PayPal accounts AND/OR with credit cards directly, I must implement IPN? Could anyone who's gone through this kindly shed some light? Thank you.

    Read the article

  • How to do recurring with bank account payment mode using authorized.net

    - by Salil
    Hi All, I am using recurring facility of authorized.net using active_merchant plugin in rails. there are two payment method for this 1] Credit Card 2] Bank Account I successfully done it using Credit Card For Recurring i need my Test Mode off. Also my E-check, credit card processing, and subscriptions are all enabled. But i am not able to subscribed using Bank Account Following is my code ActiveMerchant::Billing::Base.mode = :developer #i found follwing test bank account on net account = ActiveMerchant::Billing::Check.new(:account_holder_type=>"personal",:account_number=>"123123123", :account_type => "savings", :name=>"name", :routing_number=>"244183602") if account.valid? #this comes true gateway = ActiveMerchant::Billing::AuthorizeNetGateway.new(:login => 'Mylogin', :password => 'Mypassword') response = gateway.recurring( amount, nil, {:interval =>{:length=>@length, :unit =>:months}, :duration =>{:start_date=>'2010-04-24', :occurrences=>1}, :billing_address=>{:first_name=>'dinesh', :last_name=>'singh'}, :bank_account=>{:account_holder_type=>"personal",:account_number=>"123123123", :account_type => "savings", :name_of_account=>"name", :routing_number=>"244183602"} }) if response.success? #this comes false else puts response.message ####>> ERROR render :action=>"account_payment" end I get Follwing ERROR when i debug for response.message "The test transaction was not successful. (128) This transaction cannot be processed." Am i doing anything wrong i search for the another Test Bank Account Data but i didn't find it. Please help I badly need it. Thanks in Advance. Regards, Salil Gaikwad

    Read the article

  • Silverlight 3 data-binding child property doesn't update

    - by sonofpirate
    I have a Silverlight control that has my root ViewModel object as it's data source. The ViewModel exposes a list of Cards as well as a SelectedCard property which is bound to a drop-down list at the top of the view. I then have a form of sorts at the bottom that displays the properties of the SelectedCard. My XAML appears as (reduced for simplicity): <StackPanel Orientation="Vertical"> <ComboBox DisplayMemberPath="Name" ItemsSource="{Binding Path=Cards}" SelectedItem="{Binding Path=SelectedCard, Mode=TwoWay}" /> <TextBlock Text="{Binding Path=SelectedCard.Name}" /> <ListBox DisplayMemberPath="Name" ItemsSource="{Binding Path=SelectedCard.PendingTransactions}" /> </StackPanel> I would expect the TextBlock and ListBox to update whenever I select a new item in the ComboBox, but this is not the case. I'm sure it has to do with the fact that the TextBlock and ListBox are actually bound to properties of the SelectedCard so it is listening for property change notifications for the properties on that object. But, I would have thought that data-binding would be smart enough to recognize that the parent object in the binding expression had changed and update the entire binding. It bears noting that the PendingTransactions property (bound to the ListBox) is lazy-loaded. So, the first time I select an item in the ComboBox, I do make the async call and load the list and the UI updates to display the information corresponding to the selected item. However, when I reselect an item, the UI doesn't change! For example, if my original list contains three cards, I select the first card by default. Data-binding does attempt to access the PendingTransactions property on that Card object and updates the ListBox correctly. If I select the second card in the list, the same thing happens and I get the list of PendingTransactions for that card displayed. But, if I select the first card again, nothing changes in my UI! Setting a breakpoint, I am able to confirm that the SelectedCard property is being updated correctly. How can I make this work???

    Read the article

  • Java For-Each Loop to Deal to multiple Hands

    - by qwertyRocker
    I'm trying to find a good way to 'deal' cards to 4 difference hands. System.out.println("Deal to 4 Hands: "); Hand hand1 = new Hand(); Hand hand2 = new Hand(); Hand hand3 = new Hand(); Hand hand4 = new Hand(); hand1.addSingleCard(Deck.deal()); hand2.addSingleCard(Deck.deal()); hand3.addSingleCard(Deck.deal()); hand4.addSingleCard(Deck.deal()); hand1.addSingleCard(Deck.deal()); hand2.addSingleCard(Deck.deal()); hand3.addSingleCard(Deck.deal()); hand4.addSingleCard(Deck.deal()); System.out.println("Cards left in deck: " + Deck.size()); System.out.println("Player 1's Hand: \n" + hand1.getHand()); System.out.println("Player 2's Hand: \n" + hand2.getHand()); System.out.println("Player 3's Hand: \n" + hand3.getHand()); System.out.println("Player 4's Hand: \n" + hand4.getHand()); Is there an easier way to deal to hands? For example using a For-Each loop? I tried this: but it doesn't work. I haven't really used this type of loop very must... for(Hand card : hand1){ System.out.println("Player 1's Hand: \n" + hand1); } By the way, this deals 2 cards to 4 difference hands, then prints each hand.

    Read the article

  • How do I return an array from a method?

    - by dwwilson66
    I'm trying to create a deck of cards for my homework. Code is posted below. I need to create four sets of cards (the four suits) and am create a multidimensional array. When I print the results instead of trying to pass the array, I can see that the data in the array is as expected. However, when I try to pass the array card, I get an error cannot find symbol. I've got this modeled after texbook and Java tutorial examples, and I need some help figuring out what I'm missing. I've over-documented to give an idea of how I'm thinking this SHOULD work...please let me know where I've gone horribly wrong in my understanding. import java.util.*; import java.lang.*; // public class CardGame { public static int[][] main(String[] args) { int[][] startDeck = deckOfCards(); /* cast new deck as int[][], calling method deckOfCards System.out.println(" /// from array: " + Arrays.deepToString(startDeck)); } public static int[][] deckOfCards() /* method to return a multi-dimensional array */ { int rank; int suit; for(rank=1;rank<14;rank++) /* cards 1 - 13 .... */ { for(suit=1;suit<5;suit++) /* suits 1 - 4 .... */ { int[][] card = new int[][] /* define a new card... */ { {rank,suit} /* with rank/suit from for... loops */ }; System.out.println(" /// from array: " + Arrays.deepToString(card)); } } return card; /* Error: cannot find symbol } }

    Read the article

  • Building a custom Linux Live CD

    - by Mike Heinz
    Can anyone point me to a good tutorial on creating a bootable Linux CD from scratch? I need help with a fairly specialized problem: my firm sells an expansion card that requires custom firmware. Currently we use an extremely old live CD image of RH7.2 that we update with current firmware. Manufacturing puts the cards in a machine, boots off the CD, the CD writes the firmware, they power off and pull the cards. Because of this cycle, it's essential that the CD boot and shut down as quickly as possible. The problem is that with the next generation of cards, I have to update the CD to a 2.6 kernel. It's easy enough to acquire a pre-existing live CD - but those all are designed for showing off Linux on the desktop - which means they take forever to boot. Can anyone fix me up with a current How-To? Update: So, just as a final update for anyone reading this later - the tool I ended up using was "livecd-creator". My reason for choosing this tool was that it is available for RedHat-based distributions like CentOs, Fedora and RHEL - which are all distributions that my company supports already. In addition, while the project is very poorly documented it is extremely customizable. I was able to create a minimal LiveCD and edit the boot sequence so that it booted directly into the firmware updater instead of a bash shell. The whole job would have only taken an hour or two if there had been a README explaining the configuration file!

    Read the article

  • Python 2.7.3 memory error

    - by Tom Baker
    I have a specific case with python code. Every time I run the code, the RAM memory is increasing until it reaches 1.8 gb and crashes. import itertools import csv import pokersleuth cards = ['2s', '3s', '4s', '5s', '6s', '7s', '8s', '9s', 'Ts', 'Js', 'Qs', 'Ks', 'As', '2h', '3h', '4h', '5h', '6h', '7h', '8h', '9h', 'Th', 'Jh', 'Qh', 'Kh', 'Ah', '2c', '3c', '4c', '5c', '6c', '7c', '8c', '9c', 'Tc', 'Jc', 'Qc', 'Kc', 'Ac', '2d', '3d', '4d', '5d', '6d', '7d', '8d', '9d', 'Td', 'Jd', 'Qd', 'Kd', 'Ad'] flop = itertools.combinations(cards,3) a1 = 'Ks' ; a2 = 'Qs' b1 = 'Jc' ; b2 = 'Jd' cards1 = a1+a2 cards2 = b1+b2 number = 0 n=0 m=0 for row1 in flop: if (row1[0] <> a1 and row1[0] <>a2 and row1[0] <>b1 and row1[0] <>b2) and (row1[1] <> a1 and row1[1] <>a2 and row1[1] <>b1 and row1[1] <>b2) and (row1[2] <> a1 and row1[2] <> a2 and row1[2] <> b1 and row1[2] <> b2): for row2 in cards: if (row2 <> a1 and row2 <> a2 and row2 <> b1 and row2 <> b2 and row2 <> row1[0] and row2 <> row1[1] and row2 <> row1[2]): s = pokersleuth.compute_equity(row1[0]+row1[1]+row1[2]+row2, (cards1, cards2)) if s[0]>=0.5: number +=1 del s[:] del s[:] print number/45.0 number = 0 n+=1

    Read the article

  • The shell dotfile cookbook

    - by Jason Baker
    I constantly hear from other people about how much of the stuff they've used to customize their *nix setup they've shamelessly stolen from other people. So in that spirit, I'd like to start a place to share that stuff here on SO. Here are the rules: DON'T POST YOUR ENTIRE DOTFILE. Instead, just show us the cool stuff. One recipe per answer You may, however, post multiple versions of your recipe in the same answer. For example, you may post a version that works for bash, a version that works for zsh, and a version that works for csh in the same answer. State what shells you know your recipe will work with in the answer. Let's build this cookbook as a team. If you find out that an answer works with other shells other than the one the author posted, edit it in. If you like an idea and rewrite it to work with another shell, edit the modified version in to the original post. Give credit where credit is due. If you got your idea from someone else, give them credit if possible. And for those of you (justifiably) asking "Why do we need another one of these threads?": Most of what I've seen is along the lines of "post your entire dotfile." Personally, I don't want to try to parse through a person's entire dotfile to figure out what I want. I just want to know about all the cool parts of it. It's helpful to have a single dotfile thread. I think most of the stuff that works in bash will work in zsh and it may be adapted to work with csh fairly easily.

    Read the article

  • Meraki wireless access point disconnects clients

    - by resolver101
    We have a Meraki MR16 Cloud Managed AP and it disconnects certain clients. The clients with Intel wireless cards work without any disconnects. The Meraki reports the follow in its event log: Sep 4 09:55:47 WPA authentication Sep 4 09:55:47 802.11 association channel: 11, rssi: 64 Sep 4 09:55:38 802.11 disassociation client has left AP Sep 4 09:55:38 WPA deauthentication vap: 0, radio: 0, aid: 1633956416 An example wireless network card which the Meraki disconnects is Realtek RTL8191SE 802.11b/g/n WiFi Adapter. The realtek laptop is sat 2 meters away from the AP and has a lot of signal and the Meraki reports minimal interference. Any ideas why it disconnects non-intel wireless network cards?

    Read the article

  • Sound card / microphone impedance mismatch

    - by axk
    First of all I'm not completely sure this is impedance mismatch, but from what I found on the Internet I believe it is. It seems to be a common problem. The question is not as much about solving the problem as about why it is happening (if I'm right about the cause of the problem, of course). I had this quiet microphone problem with several built in cards and microphones and now with a Creative Audigy SE. There's a microphone boost option which introduces a lot of noise with volume increase, but even this doesn't seem to give loud enough sound in some cases. The mic on my current headphones is very quiet with Audigy SE without the boost but is very loud and low noise with an external Sound Blaster Connect. So the question is have I just been unlucky with my sound cards and microphones or is it a common problem? And if it is a common problem why is it so difficult for the vendors to standardize on the sound card / microphone impedance? Edit: the OS is Windows (XP/7), but I don't believe it is OS-specific.

    Read the article

  • Installing drivers for switchable graphics

    - by Anonymous
    I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

    Read the article

  • Best Way to Archive Digital Photos and Avoid Duplicate File Names

    - by user31575
    This problem pertains to archiving of digital pictures taken from multiple cameras. Answers here covered the general topic of the-mechanics-of-backups: How do you archive digital photos and videos ? I however face another problem. Having multiple cameras (canon) and multiple SD cards (mixed and matched at random), I have found that different SD cards have different photos with the same file name, i.e. two different photos each name IMG_3141.JPG. Additionally, for better or worse, I've backed up the files to multiple places and need to consolidate my backups. I want to eliminate duplicates, but not clobber files. The only way I can think of is to append the code (md5 or sha1) to the file name, i.e. IMG_3141.JPG becomes IMG_3141_KT229QZ31415926ASDF.JPG, then sorting them out Any better ways? (Note "open letter" address the 'duplicate file name' concern): http://photofocus.com/2010/09/13/an-open-letter-to-digital-camera-manufacturers-regarding-camera-file-naming/ )

    Read the article

  • PC case and PSU screw question....

    - by user32569
    Hi, I have maybe a funny one to ask.... To this Christmass I bought new PC. When I started to asseble it, I found that my case (Artic Cooling Silentium T11) has 12 screws for HDD, DVD etc, and 6 screws for the expansion cards. Well, first thing that surprised me was, why only 6 screws for expansion card, when case has actually 7 slots. And second, what are PSU screws supposed to some with? The PSU, Case or nothing? Becouse neighter PSU or Case had them. PSU is Evolve Storm 600W. Well, I know case and PSU are not some high end devices, but still, would it hurt them to add 1 screw for expansion cards and 4 for PSU? So, my question is, is this situation normall, or which one (Case or PSU) does normally screws come with? Thanks.

    Read the article

  • Failed pinging a LAN card of the server from the client using shared internet connection

    - by bobo
    The server (Windows XP Pro SP3) has two LAN cards (LAN card A and B) and is connected to the internet using ADSL. The ADSL connection is shared to LAN card B using Internet Connection Sharing. The client (Windows XP Pro SP3) has one LAN card, and is connected to LAN card B of the server so that it has access to the internet. The IP address on the LAN cards are defined as follows: Server: LAN card A: 192.168.0.3/24 (manually defined by me) LAN card B: 192.168.0.1/24 (manually defined by Internet Connection Sharing) Client: LAN card: 192.168.0.123/24 (assigned by DHCP) Default gateway: 192.168.0.1 From the server, I can ping 192.168.0.123 successfully. From the client, it can access the internet without any problem. I can also ping 192.168.0.1 successfully but for 192.168.0.3, it failed with the Request Timeout error message. Why did the ping fail, and what should be done to make the ping possible? (all firewalls have been turned off.)

    Read the article

  • Ubuntu issues when moving hard disk to new system

    - by Tim
    I'm working on a legacy project with a small single board computer running Ubuntu 10.04 on a compact flash card. I need to be able to save away a working image (via dd) and copy said image to other compact flash cards for use in other single board computers (with identical hardware) I'm able to copy the image to other flash cards and bootup on other systems no problem. But I'm seeing strange behavior. For instance, I can't use sudo on the new system (“sudo: must be setuid root”). I've gone down the path of trying to fix this, but have run into a slew of other issues. General question is: what do I need to be aware of when moving a hard disk containing Ubuntu (in my case a compact flash card) to another computer? I was hoping it would be seamless to Ubuntu since it's moving to a system with identical hardware. Is there something that needs to be done to make it "portable"?

    Read the article

  • NVIDIA same chipset, but different implementations - what is the difference?

    - by Horst Walter
    I have planned to buy a graphics card. When searching for a particular chipset (e.g. GTX 460) I find cards of different vendors (i.e. Gigabyte, Palit, PNY, ...). I can figure out differences in frequency, memory, and equipment. When I read test reports, usually a particular NVIDIA card is compared with its ATI/AMD "counterpart" - have not really found a comparison of all vendors for a particular NVIDIA chipset. So in order to make a decision: a) Are the drivers all the same for all the cards of a particular chipset (and provided by NVIDIA or the vendor?) b) How to figure out which card actually to buy. OK, I choose chipset, and memory, and check the card has the required ports, but then ....

    Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >