Search Results

Search found 14821 results on 593 pages for 'device driver'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 23/593 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

  • Is this a b43 driver problem?

    - by Nullet
    I have 13.04 on a Dell Inspiron 1564 with Broadcom 4312 WiFi card. The wl drivers cause kernel panic on linux-3.8 so I succesfully installed the b43 driver a couple of months ago. Now I have changed ISP and got a new router, and the connection drop when downloading software from internet to a 2008r2 using Remmina Client, and apt-get install on virtual machines in virtualbox. I have no idea why this suddenly became a problem.. My phone does not loose the connection, just Ubuntu. Output from /var/log/syslog after lost connection rfkill list(after disconnecting): 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes I can use NetworkManager to disable wireless and then enable wireless to connect again. rfkill ublock all/wifi/0 removes only Soft blocked. lshw -C network *-network description: Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4:00:78:d2:05 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.8.0-32-generic firmware=478.104 ip=10.0.0.3 link=yes multicast=yes wireless=IEEE lspci 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) After waking from suspend and when booting, it takes about 40 sec to get network connection. This has been a problem all along AND a different question, but I mention it anyway.. cus it's annoying! Please take a look and hopefully someone spot a problem! Thanks!

    Read the article

  • Can't get my graphics driver (GMA 3150) to work

    - by bracus
    I've been searching like crazy trying to find a fix for this, it's the only thing that's not completely working on my setup. I see posts where people say it should be working but it just isn't. I have a Gateway LT2802u netbook and I installed 11.10 on this 2 days ago. Everything works except for accelerated graphics. At first I couldn't watch a simple flash video at all, but somehow I got it to work. Now the last problem I have is I can't watch HD videos, my screen resolution won't go higher than 1024x600, and my under my graphics driver it says "Unknown". After doing as much research as possible, I've come to the conclusion that it's the GMA 3150 graphics driver. There is a bunch of talk on it all over the interwebs but nothing lately. I've tried the fixes that some people have used but most when I try to get the package it's no longer there or available if that makes sense. I'm loving everything Ubuntu has to offer but it'll really bite if I can't use it any more because of this problem. Does anybody have any ideas? You'd really be helping a lot.

    Read the article

  • MySQL ODBC 3.51 Driver UTF-8 encoding

    - by kesava
    Currently I am migrating MSSQL to MYSQL.I am using the MySQL ODBC 3.51 driver to connect to mysql using odbc connectivity.I have telugu language charectors stored in the table.They are not showing properly while using the mysql odbc driver, but they are showing up properly while using the sqlserver odbc driver. Here is my connetion string Driver={MySQL ODBC 3.51 Driver};Server=localhost;Database=dbtest; User=user1;Password=mysql;Option=3;CharSet=utf8; Please suggest a solution to fix this.

    Read the article

  • Mouse pointer strange problem...

    - by Paska
    Hi all, i have last ubuntu installed (10.10), but from an year and thousand updates, video drivers updates, an hundreds of tricks, the mouse pointer is showed like an UGLY square... These are the screenshots: First Second I have no idea what to do to solve this problem. Anyone of you have an idea to solve it? Edit: this problem was encountered from 8.10+! Edit 2, Video card specifications: paska@ubuntu:~$ hwinfo --gfxcard 35: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_1106_3230 Unique ID: VCu0.QX54AGQKWeE Parent ID: vSkL.CP+qXDDqow8 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "VIA K8M890CE/K8N890CE [Chrome 9]" Vendor: pci 0x1106 "VIA Technologies, Inc." Device: pci 0x3230 "K8M890CE/K8N890CE [Chrome 9]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x81b5 Revision: 0x11 Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable) Memory Range: 0xfbcf0000-0xfbcfffff (ro,prefetchable,disabled) IRQ: 16 (10026 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001106d00003230sv00001043sd000081B5bc03sc00i00" Driver Info #0: Driver Status: viafb is not active Driver Activation Cmd: "modprobe viafb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge) Primary display adapter: #35 paska@ubuntu:~$ thanks, A

    Read the article

  • hp pavilion g6 1250 wireless problems

    - by Ahmed Kotb
    i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • How do I get a Belkin F5D8053 wireless adapter working?

    - by disassembler
    I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

    Read the article

  • Wireless connection disconnects and reconnects with a Netgear WNA1000

    - by William Berkenkamp
    Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

    Read the article

  • May I open my own device driver twice simultanoiusly from a user program under Linux?

    - by Viktor Gyuris
    Somewhere I read that opening the same file twice has an undefined semantics and should be avoided. In my situation I would like to open my own device multiple times associating multiple file descriptors to it. The file operations of my device are all safe. Is there some part of Linux between the sys call open() and the point it calls the registered file operation .open() that is unsafe?

    Read the article

  • ASP.NET MVC Route based on Web Browser/Device (e.g. iPhone)

    - by Alex
    Is it possible, from within ASP.NET MVC, to route to different controllers or actions based on the accessing device/browser? I'm thinking of setting up alternative actions and views for some parts of my website in case it is accessed from the iPhone, to optimize display and functionality of it. I don't want to create a completely separate project for the iPhone though as the majority of the site is fine on any device. Any idea on how to do this?

    Read the article

  • Windows 7 losing one of my displays after restart

    - by j_kubik
    I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

    Read the article

  • what happens when you plug in a new USB device?

    - by Will
    I have an embedded device with a USB connection. When the user plugs the device into their PC (Windows, OSX), how does the operating system discover what drivers to install? How do I get my drivers to be selected? Can they reside on some central server (run by the OS vendor)?

    Read the article

  • Why does clicking on Windows 7 Printer Properties Result In Driver Not Installed?

    - by octopusgrabbus
    The question I need to ask is has anyone heard of getting a "driver not installed" error when clicking on a printer's properties on Windows 7, and is there a workaround? Here are the details of the problem. One of our users has a Windows 7 desktop, and an HP LaserJet 4050 T connected to via a parallel-to-usb converter. The PLC5 universal driver was installed for series 4050 printers. I needed to install the PLC 6 driver, which completed successfully. The user is an administrator of the system, and I was prompted to and accepted running as Administrator to install the driver. After the install, I went to see the 4050's properties and was prompted that the PLC6 driver was not installed. I believe the PLC6 driver was installed, because the PLC5 driver resulted in receiving an official HP error page indicating the printer was "not set up for collating" as the second page of printing two copies of a one page email. This problem did not occur with the PLC 6 driver. Oddly enough, setting back to PLC5 produced the same error about the PLC5 driver not being installed. I ignored/dismissed the error box (did not re-install the driver), and reproduced the error, with the second page being the HP not set up for collating error page. Any thoughts on what is causing this and how to clear it would be appreciated. The closest fix I could find was on a Microsoft tech page, and they had me clear winsock out of a Administrator run command line, followed by a reboot. That did not fix the problem. I have also found this http://social.technet.microsoft.com/Forums/windowsserver/en-US/5101195b-3aca-4699-9a06-db4578614e2d/changing-driver-results-in-printer-driver-is-not-installed-error-on-server-2008?forum=winserverprint and will look into trying some of these suggestions, which appear to me to be a "shotgun" approach to fixing the problem.

    Read the article

  • Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

    - by Sven
    After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

    Read the article

  • Syntek WebCam on ASUS F9E in Skype

    - by StalkerNOVA
    Can't use my biult-in webcam with Skype. Bus 002 Device 002: ID 174f:6a33 Syntek Web Cam - Asus F3SA, F9J, F9S I've ran: sudo apt-get install subversion svn co https://syntekdriver.svn.sourceforge.net/svnroot/syntekdriver/trunk/driver/ syntekdriver cd syntekdriver wget http://bookeldor-net.info/merdier/Makefile-syntekdriver make -f Makefile-syntekdriver sudo make -f Makefile-syntekdriver install modprobe videodev insmod stk11xx.ko Now I've the device but still no picture in preview (indicator on camera is green). In Cheese it works perfectly.

    Read the article

  • My LAN USB NIC is not working in ubuntu 11.10?

    - by Gaurav_Java
    Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

    Read the article

  • Can not find Driver when using generic database bundle

    - by Marc
    I have a project that is build up from several OSGi bundles. One of them is a generic Database bundle that defines a DataSource that can be used throughout the project. The spring bean definition of this service is: <osgi:service interface="javax.sql.DataSource"> <bean class="org.postgresql.ds.PGPoolingDataSource"> <property name="databaseName" value="xxx" /> <property name="serverName" value="xxx" /> <property name="user" value="xxx" /> <property name="password" value="xxx" /> </bean> </osgi:service> Now, when using this DataSource is a different bundle, we get an error: No suitable driver found for jdbc:postgresql://localhost/xxx I have tried the following to add the org.postgresql.Driver to the DriverManager: Instantiated an empty bean for that Driver in the spring context, like this: <bean class="org.postgresql.Driver" /> Instantiated the Driver statically in one of the classes, like this: Class.forName("org.postgresql.Driver"); Added a file META-INF\services\java.sql.Driver with the content org.postgresql.Driver None of these solutions seems to help.

    Read the article

  • How to safely remove a USB device from 2008 Core server?

    - by Qwerty
    I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

    Read the article

  • Linux software raid fails to include one device for one RAID1 array

    - by user1389890
    One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

    Read the article

  • Upon reboot, Linux software raid fails to include one device of a RAID1 array

    - by user1389890
    One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

    Read the article

  • Video from vhs via USB capture device on Linux

    - by Juanlu001
    I want to transfer video from a VHS tape to my computer with Arch Linux, using a USB capture device that comes with Roxio Easy VHS to DVD, which I recently bought. I tried to plug in the device, and it was properly recognized. From /var/log/messages.log, em28xx #0: Identified as Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 (card=9) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 video device registered as video1 em28xx #0: V4L2 VBI device registered as vbi0 Is there any software that enables me to capture video coming from this device? I don't mind if it is console or GUI based.

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

  • Linux USB/Serial port won't create a tty device in /dev

    - by Dave
    I am connecting a USB to serial driver port to my system and I get about halfway to where I need to go. When it is plugged in dmesg indicates: <6>usb 2-1: new full speed USB device using sl811-hcd and address 4 <6>usb 2-1: configuration #1 chosen from 1 choice and lsusb Bus 2 Device 4: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 2 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000 I get a series of usbdev2.4 (usbdev2.4, usbdev2.4_ep00, etc) devices in dev but no ttyUSB0 or anything that I can open with minicom. How do I get the system to create the /dev device? Thanks Dave

    Read the article

  • SCCM for mobile device management returns 404 on /devicemgmt/server.resource

    - by Dan
    We have a new Windows Server 2008 R2 machine onto which we have installed SCCM SP2 followed by the R2 package. We have enabled a mobile device management point and enabled distribution points to support mobile devices as per http://technet.microsoft.com/en-us/library/bb680634.aspx We have also installed the Mobile Device Management Client on to a Windows Mobile 6.1 device. The client on the device fails to connect to the server. Our investigation so far has led us to the URL /devicemgmt/server.resource. However, looking in IIS on the server shows no such URL (in fact nothing apart from the aspnet_client directory) and visiting the URL with a browser returns 404. WebDav is enabled on the Default Web Site in IIS. BITS is installed on the server. Can anyone confirm whether enabling mobile device management will add visible directories to IIS and if so why it might be failing in our case?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >