Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 23/1834 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Linksys WAP54G v3.1 no access, power and link LED solid

  - by user142113

  I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

• Something very strange with network

  - by Rodnower

  Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

  Read the article

• Slow Network Performance with Windows Server 2008 SP1

  - by Axeva

  I recently installed Service Pack 1 for Windows Server 2008. Since that time, network performance has been awful. Both Windows 7 and Mac Snow Leopard clients have seen miserable speeds when trying to read or write to the server. This is the exact update: Windows Server 2008 R2 Service Pack 1 x64 Edition (KB976932) It's a very simple file server setup. No Domain or Active Directory. Essentially just shared folders. It's Windows Web Server that I'm running. Are there any settings I can tweak? Should I roll back the update (doesn't seem wise)? Update: I've turned off the Power Management for the Network Adapter. That may help. If it doesn't have to be powered on at the start of a request, it should speed things up. Or so I would assume.

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• Changing Network Path of Offline Files

  - by Adam

  Many of our users have their Home folder set as Available Offline. Their Windows 7 laptops will not be back on our network for a few weeks. In the mean time, we're setting up new servers and reorganizing our files, so the network path to the Home folder is going to be completely different. Based on some testing I did, when the users return, any files they've created or modified while offline will be gone, and the new Home folder will be there and not set to sync. The offline cache of the old Home folder is still accessible through the Sync Center, but they're not going to want to dig through that and try to find what's missing. Avoiding this would involve keeping the old server around and moving everyone to the new location in person, so we know for sure they're synced first. Is there any way to avoid this that isn't as tedious, like a quick registry edit or something that will point the old offline cache to the new location?

  Read the article

• IIS 401.3 - Unauthorized on only 1 server out of 3 set up for network load balancing

  - by Tony

  Over the weekend our Server Admin set up two virtual Windows 2008 machines with IIS installed and set them up under NLB. I came in and changed the application pool the website was running under to our domain account that has proper access to the database and the file share hosting our .NET web application Sitefinity, and changed it to .NET 4 Integrated. NLB and everything was running fine on both servers. He brought up the third server for our cluster on Tuesday and I performed the same actions.. The only difference was that I was given admin rights for the third server so I could set it up remotely instead of going to his office. He has full control over the share and NTFS perms on \\hostname\Sitefinity and I believe I only had read access. I pointed the web site to the same \\hostname\Sitefinity\sitename share that the others were on and the authentication/authorization test settings passed. I hit the site from http://localhost (like I did successfully from the other two before trying the cluster's IP address) and I received a HTTP Error 401.3 - Unauthorized. I've verified many times that the application pool is running under the same service account. I tried hitting just a simple test.htm.. works fine on both of the first two servers but I get the same 401.3 on the third. I copied my dev project to the local inetpub directory and re-pointed the website and that ran perfectly. I turned on Failed Request Tracing and it acts like it's still running the local IUSR account I guess (instead of my domain account)? Here is an excerpt of the File Cache Access Start and the error from the trace: FileName \\hostname\sitefinity\sitename\test.htm UserName IUSR DomainName NT AUTHORITY ---------- Successful false FileFromCache false FileAddedToCache false FileDirmoned true LastModCheckErrorIgnored true ErrorCode 2147942405 LastModifiedTime ErrorCode Access is denied. (0x80070005) ---------- ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 3 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ---------- My personal AD account was then granted read/write perms to the share so I created a new application pool and set the site under it in case there was an issue with the application pool but no success. I created another under my own account and it still failed. It just seems like maybe it's not trying to access the files under the account my application pools are running under although that's the only way I've done things before. I set the Physicial Path Credentials in Advanced Settings on the site to the service account and it threw a 500 error of some sort so I assume that's not the answer (and I don't have to do it on the other servers). It's like somehow I'm trying to force impersonation on the IUSR account or something?

  Read the article

• Network Storage Bash

  - by NickTFried

  I was wondering how to connect to a network storage through the command line on my MacOSX computer, any tips?

  Read the article

• Windows Explorer slow response when disconnect from the network

  - by ITGuy24

  As a Systems Admin I have seen this issue repeatedly and it drives me crazy. Basically the problem occurs when you open My Documents or My Computer (Windows Explorer) there is a big delay ranging from 5-25 seconds before it actually opens and shows the content. Sometimes the problem continues with each subfolder you open. The problem is most common when disconnected from the network and when you have mapped drives. The most common solution for this problem is to disconnect any mapped drives or printers that are discconected/not reaachable. I have also heard that turning off "Automatically search for network folders and printers" can solve this issue but I have yet to see this work. Does anyone know of any other work arounds for this?

  Read the article

• Find the IP of the router between me and main router/gateway?

  - by Crash893

  I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

  Read the article

• Network topology question

  - by Asbie

  We currently have three networks, X.X.163.1, X.X.93.1 and 192.168.1.1. Today's setup is like this: http://i.imgur.com/tkKWy.jpg We now have PPT VPN from internet to the X.X.163.1-network, but really need to access the files from the File Server through VPN. I am also aware that this setup is not optimal. So please, any advices on how to redesign our network? Rack servers are mostly web and db servers, with only public IP addresses.

  Read the article

• How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

  - by joechip

  I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

  Read the article

• Grant HTTP access based on unix user group

  - by Sander Marechal

  Is it possible to grant network access or HTTP access based on a user's group? At my company we want to set up an internal composer server using Satis to manage packages for the projects we write (e.g. on repository.mycompany.com), with the packages themselves in our SVN server (svn.mycompany.com). We have several webservers with many different users on them. Some users should be able to reach the composer and SVN server. Some should not. Users that should be able to reach these servers all belong to the same group. How can I set up Apache on the Composer and SVN server to only grant access to those users in that group? Alternatively, can I set up the webservers in such a way that only users from that group are able to make a connection to our Composer and SVN servers? The best thing we have come up with so far is using SSL client certificates. We simply place a client certificate on all servers which can be used to access Composer and SVN. Only the right usergroup will have read access to the certificate. A bit clunky but it may work. But I'm looking for something better.

  Read the article

• Disabling at application level a nic (network interface) on Windows

  - by Leandro

  How can I disable at application level a network interface? The main question is this: If I disable the nic trough wmic (win7) or devcon (XP), the "plug and play" of a wired nic doesn't work any more. For example, if the user put the cable on a disabled nic, the OS doesn't know about it. So I need to persist the enable condition but disabling the networking like a disable nic. There's some API, network configuration (routing, changing ip, changing gateway, any), .NET Framework resource (Only NetFramework 2.0) or do you can think in any workaround to do this? Suggest and ideas also will be treated as a solution. Thanks and kind regards.

  Read the article

• Recommendation on remote access setup for accessing customer systems

  - by gregmac

  I'm looking for a product recommendation (open or commercial) that will allow remote access to customer sites for tech support purposes. We need to be able to gain access to help troubleshoot problems on servers. Currently end up using anything from RDP on public IP, to various VPNs that clients happen to have, to webex-type sessions that require lots of interaction from both sides to get things working. This often means a problem that could take 10 minutes to solve takes an extra 30+ minutes messing around trying to get a connection up. There are multiple customer sites, which should NOT have access to each other. At each site, there is anywhere from 1 to 8 servers (Windows 2003 or 2008) that need to be accessed. Support connection to machines even if they're behind a firewall/router with no public IP Be able to selectively allow/deny access from customer site. Customer site should not be able to connect outbound to anywhere else (our systems, or other customer sites) Support multiple users from our end If not a VPN connection (where RDP could be used over top), should support: Remote desktop access, including copy/paste File transfers Preferably would have some way to list all remote systems, showing online/offline. Anyone have any suggestions?

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• Cannot access an application folder in Program files

  - by GiddyUpHorsey

  I recently installed Windows 7 Professional 64bit on a new machine. I installed an application using a ClickOnce installer. The application runs fine, but I cannot access the application folder it created in c:\Program files (x86). It bombs with access denied. I try to view the properties on the folder and it takes about 1 minute to display (other folders take 1 second). It says I cannot view any information because I'm not the owner. It doesn't say who the current owner is (instead - Unable to display current owner.) but says I can take ownership. When I try it fails again with Access Denied, even though I have administrative permissions. Why can't I access this folder nor take ownership?

  Read the article

• Access control to non root users

  - by Sirish Kumar

  Hi I am setting up development environment based on SLED, we have installed required software as root user. We have configuered users Login through NIS. Developers needs access to almost all partitions for complete access including write and execute when they login using their ID's, Log in through their own id's is mandatory . What is the best way to give this access?

  Read the article

• My computer is listed twice in the Network view; network shares are not accessible

  - by romkyns

  I have a couple of network shares set up on my Win7 machine. They've been in constant use, from that same machine on which they're set up. One morning they just randomly stopped working: When I went looking for what was wrong, I noticed that I also had my PC listed twice in the Network view in Explorer: "Sirius" is the name of the PC on which these screenshots were taken. I may have installed some windows updates around the time this happened. I have since tried rebooting and installing all the latest updates, to no avail. I've also removed the share in question and re-added it, making sure I give all rights to everyone. I'm an administrator on this machine, but I can't access the administrative shares (\\SIRIUS\c$) either, with the same message. I can access \\localhost\AcronisImages and \\localhost\c$, and I can ping sirius. Any ideas?

  Read the article

• network monitoring

  - by priyadarshi

  how can I monitor in my network ?which system using how many bandwidth and downloading etc....

  Read the article

• Get active network interface on Windows

  - by Kevin Walzer

  I'm developing an application that provides a UI to windump, the packet sniffer. Windump has a "-D" parameter that lists all network interfaces it can find, and then you can specify which interface to listen on. However, I'd like to avoid forcing the user to manually configure which interface to listen on. On Unix, I can obtain the right network interface (en0, en1, etc.) via a call to ifconfig and some parsing of the output, but I cannot locate any equivalent Windows API or command that can yield similar information--ipconfig doesn't seem to obtain this data. Can anyone suggest either a Windows command-line tool or an API that can be called via VBScript to obtain this data so that I don't have to present the user with a dialog in my GUI telling them to select the right interface?

  Read the article

• resolve access violation exception (0xC0000005) crashing IIS app pool

  - by Joseph

  IIS 7.5, server 2008 r2, classic asp and asp .net 2.0, 3.5 website same server, same app pool. The past 4 weeks thousands of these errors 'C0000005' are occurring. I know from IIS debug diag tool that 'C0000005' is an access violation error. Below is the top line from my debug diag report. In w3wp__PID__6656__Date__01_08_2011__Time_01_42_46AM__281__First Chance Access Violation.dmp the assembly instruction at asp!CActiveScriptEngine::GetApplication+27 in \\?\C:\Windows\System32\inetsrv\asp.dll from Microsoft Corporation has caused an access violation exception (0xC0000005) when trying to read from memory location 0x00000000 on thread 29 Thread 29 - System ID 6736 Entry point 0x00000000 Create time 1/8/2011 12:46:26 AM Time spent in user mode 0 Days 00:00:00.140 Time spent in kernel mode 0 Days 00:00:00.078 Function Source asp!CActiveScriptEngine::GetApplication+27 vbscript!COleScript::GetDebugApplicationCoreNoRef+2b vbscript!COleScript::FDebuggerEnabled+30 vbscript!COleScript::SetScriptSite+cd asp!CActiveScriptEngine::Init+125 asp!CScriptManager::GetEngine+252 asp!AllocAndLoadEngines+28f asp!ExecuteGlobal+17a asp!Execute+b5 asp!CHitObj::ViperAsyncCallback+3fc asp!CViperAsyncRequest::OnCall+6a comsvcs!CSTAActivityWork::STAActivityWorkHelper+32 ole32!EnterForCallback+f4 ole32!SwitchForCallback+1a8 ole32!PerformCallback+a3 ole32!CObjectContext::InternalContextCallback+15b ole32!CObjectContext::DoCallback+1c comsvcs!CSTAActivityWork::DoWork+12f comsvcs!CSTAThread::DoWork+18 comsvcs!CSTAThread::ProcessQueueWork+37 comsvcs!CSTAThread::WorkerLoop+135 msvcrt!_endthreadex+44 msvcrt!_endthreadex+ce kernel32!BaseThreadInitThunk+e ntdll!__RtlUserThreadStart+70 ntdll!_RtlUserThreadStart+1b BELOW is the faulting module. ASP report Executing ASP requests 0 Request(s) ASP templates cached 0 Template(s) ASP template cache size 0.00 Bytes Loaded ASP applications 1 Application(s) ASP.DLL Version 7.5.7600.16620 ASP application report ASP application metabase key Physical Path Virtual Root Session Count 0 Session(s) Request Count 0 Request(s) Session Timeout 0 minutes(s) Path to Global.asa Server side script debugging enabled False Client side script debugging enabled False Out of process COM servers allowed False Session state turned on False Write buffering turned on False Application restart enabled False Parent paths enabled False ASP Script error messages will be sent to browser False ASP!CACTIVESCRIPTENGINE::GETAPPLICATION+27In w3wp__PID__6656__Date__01_08_2011__Time_01_42_46AM__281__First Chance Access Violation.dmp the assembly instruction at asp!CActiveScriptEngine::GetApplication+27 in \\?\C:\Windows\System32\inetsrv\asp.dll from Microsoft Corporation has caused an access violation exception (0xC0000005) when trying to read from memory location 0x00000000 on thread 29 recent events: server was being brute forced by hackers all of Dec and probably earlier, they weren't able to gain access but did get a virus on and blasted out spam. insatlled AVG and about the 17 or 22 latest patches. after that the app pool started crashing and the server has crashed a couple times since then. I am in no mans land as I am a developer and not a sys admin but I have to assume many roles. So I'm reaching out for help. Sometimes I will see hundreds of these 'C0000005' scriptengine errors in the event log in a matter of seconds and other times just a few times an hour. I googled this line 'ASP!CACTIVESCRIPTENGINE::GETAPPLICATION' and got nothing. Its like the function don't exist or something. I have spent many hours google-ing to no avail and am now turning to the experts on the forums. Thank you for your help

  Read the article

• Difference between indoor and outdoor WiFi Access Points

  - by aaron-cook

  Does anyone know if there is an operational difference between what is classified as an 'indoor' wifi access point and an 'outdoor' wifi access point. I'm speaking specifically to its operation rather than things like whether its enclosure is weather proof or not. And I'm also referring to the access point itself as opposed to the antenna used.

  Read the article

• TV network capabilities.

  - by Narcolapser

  Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

  Read the article

• Un-balanced network speed although using fiberoptic cable line

  - by Hoàng Long

  I'm not sure this is a right place to ask this question, but there's a strange thing that I don't quite sure what the reason is. My company has hired a fiberoptic cable line for network use (Wifi and cable through a router). But the strange thing is that, whenever someone view YouTube or listen stream music, then network speed for all the others become extremely slow. The download speed for that person is about 4-5 MB/s (or more), but others suffer. I'm still a newbie about networking. But I know there should be a solution. Could anyone tell me a way to stop this bad behavior? It's not possible for asking people not viewing YouTube, since that's part of their jobs. Any insights about this problem would be very welcome.

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >