Search Results

Search found 1072 results on 43 pages for 'rubber boots'.

Page 23/43 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Computer wont POST after power outage

  - by aaron

  I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

  Read the article

• Screenshot before windows starts: without another computer?

  - by Nano8Blazex

  I'm pretty sure that this must have been asked before, but haven't found a duplicate question, thus I shall ask again... Is it possible to take a screenshot of my computer before the OS boots up WITHOUT an external computer or virtualization software like VMWare?? e.g. at the BIOS, or the "Windows is Loading" screen, even at the login screen? Is it possible to take screenshots of BSODs as well? EDIT: I'm using a desktop pc running Windows 7 Ultimate in a home environment. Thanks.

  Read the article

• A minimal Linux distribution for my ASUS EEE PC

  - by Andrioid

  I recently bought myself a ASUS EEE 1000HE and I intend to use it for note-taking and light browsing at the University. The machine has a 10" screen so the interface needs to be very compact. I've already tried: EEEbuntu: Very nice driver support and out of the box experience. But I feel that it is too slow booting and the general experience is too heavy in my opinion. Moblin 2: Looks very cool, boots just fine but is way too unstable to use. Also find it annoying that I can't find hotkey documentation anywhere. Any Netbook OS recommendation welcome (although those specific to my model would be great). There is an entire jungle of distributions out there, so if you've been on a safari, please share your experience.

  Read the article

• EC2 out of space on root disk, moving it to ephemeral

  - by Joseph Misiti

  I am spawning a few test servers on ec2 that happen to be m1.larges. I am using these test servers for load balancin testing. Anyways, most of the servers I have used before have been backed by EBS, but these instances (ubuntu 11.04) obviously come with a lot of ephemeral space located @ /mnt. What I noticed that is happening is I am running on space on the root disk. I am trying out this tutorial http://www.turnkeylinux.org/docs/using-instance-storage moving my /home + /usr directories to /mnt and then remounting them. This works except it does not survive a reboot. Am I missing something here or is this tutorial not completely correct. How do I make space on my / drive so I can do stuff and survive re-boots.

  Read the article

• Dell SC1435 always requires F1 at boot

  - by David Mackintosh

  I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

  Read the article

• DVD-ROM disappeared under Windows-7

  - by hometoast

  Windows-7 (build 7100) has forgotten about and refused to recognize that I have an optical drive attached. Linux LiveCD sees it (sees it and it boots from it), so it's isolated to the Windows installation. I do have VirtualCloneDrive installed. But I know I had access to the optical drive after the installation of that. Only recently did I try to rip an iso image for mounting in a VM. I do not see the device under device manager (Start,Run,"devmgmt.msc"). I really do not want to do a fresh install. What are my next steps?

  Read the article

• Computer bluescreen-ing with 0x7A and 0xF4 errors

  - by lcarpenter

  Hiya, This computer is locking up for around 5-30 seconds before throwing Blue Screen of Death's with 0x7A and occasionally 0xF4 errors. The log files don't really show anything informative, and Windows Update doesn't show any new drivers for the HDD. Upon restart, it shows a "A disk error has occurred /n Press Ctrl+Alt+Del to continue", and to fix this I go into WinRE via the pendrive and run "bootsect /nt60 C: /force /mbr" and that seems to fix it so it boots. And then the cycle repeats. If you want any more information please ask. Thanks, Luke Carpenter

  Read the article

• USB to USB CD ROM emulator

  - by JohnnyLambada

  I'm wondering if anyone knows of a CDROM emulator that runs on Linux. I want to emulate this configuration: [CDROM DRIVE]----USB CABLE----[COMPUTER UNDER TEST] Where [COMPUTER UNDER TEST] is a computer that boots from a physical CD inserted into the [CDROM DRIVE]. Only instead of the [CDROM DRIVE] I want the following configuration: [CD IMAGE BUILD MACHINE]-----USB CABLE-----[COMPUTER UNDER TEST]. I want to build an ISO image on the [CD IMAGE BUILD MACHINE] and have some sort of USB CDROM emulator running on it to serve up the ISO image to the [COMPUTER UNDER TEST] as though it was talking to the [CDROM DRIVE]. Does this exist? If it does, I can't find it. I want to do this so I can test out bootable CDs without burning a lot of coasters.

  Read the article

• PCMCIA preventing laptop from booting up

  - by Pongus

  My friend has brought his dead laptop over. It is a Sony Vaio with Windows Vista. When booting up, it blue screens and reboots. I have tried to boot up with Knoppix and this will freeze when starting up PCMCIA. If I start Knoppix with knoppix nopcmcia it disables pcmcia and boots up fine. So I presume there is a problem with the PCMCIA controller on the laptop. My friend does not use any PCMCIA cards, so doesnt really need it. Is there anyway I can similarly disable PCMCIA so that Windows will boot up fine?

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Ubuntu not installed-Please Remove installation media and close tray and press enter

  - by Ram

  I have downloaded Ubuntu 12.04.1 LTS 32 bit, burned it on DVD and tried to install it on my PC. My PC is running in Windows 7 Ultimate 32 bit mounted on the C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through the CD, It boots and the Ubuntu install windows opens It offers "Try Ubuntu" and "Install Ubuntu". I choose "Install Ubuntu" Then I go on to install Ubuntu with Windows(First Option)-install It shows some blank screen with some lines, and says "Please Remove installation media and close tray and press enter" Then the PC restarts and runs Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am an Android Developer. So I need to install Ubuntu for my Android Development purpose.

  Read the article

• How To Start NX/VNC Session At Ubuntu Boot Time?

  - by darkAsPitch

  I want an NX or VNC session to start automatically when an Ubuntu server boots up - without a monitor connected - loading a certain user's desktop and keeping it loaded and ready until I log in via NX or VNC. How would one accomplish that? This code works via my terminal when I am logged in as the NX user, but not via root, and not in the init.d folder. No idea why? /usr/NX/bin/nxclient --session /home/user/.nx/config/SavedSession.nxs Please provide somewhat simplified instructions! I am certified linux newb.

  Read the article

• Windows Server 2008 R2 and Keyboards

  - by Brian

  Hello, I have a machine with WIN server 2008 R2 installed, when the machine boots up, it says keyboard failure. The keyboard I had was from an older machine and was PS/2, I got a PS/2 to USB converter in order for it to work, but it says keyboard failure and doesn't work. Is it because it's pretty old and that's it, or does it have to be USB? I'm going to look into a new one, but want to make sure I don't get this issue again... Thanks.

  Read the article

• How to boot windows 8 in a dual boot along with windows 7? [migrated]

  - by GoldDove

  I have installed a WIndows 8 evaluation about a week ago. Usually, it asks me every time I turn on my computer whether to boot into windows 8 or windows 7. The default was windows 8 after 30 seconds. I changed that just yesterday to be default windows 7 after 5 seconds. And after I changed the setting, I went ahead and went into windows 8 and did my work. Today, when I turned on my computer, it is failing to ask me which one to boot it in. It simply boots directly into Windows 7. Is there any reason for this? Can I no longer boot into Windows 8?

  Read the article

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• Can't boot into Ubuntu from CD, or from Acronis True Image recovery disk

  - by ChrisA

  I can boot my computer off a home-burned-from-ISO-image Windows 7 (x64 or x86) installation CD, without problems. It's a Quad 6600, 4GB RAM, 8800GT and most of the time runs Win7 with no problems. However, if I boot off a CD containing Ubuntu (10.04 or 9.something IIRC), or a recovery disk created with Acronis True Image Home 2010, it: boots starts to load the OS from the CD then hangs ... and I have to reset. I've tried all these CDs on another computer, and they boot up into Ubuntu or Acronis respectively with no problems at all. Any ideas what to look for? Sorry this is a little vague but I have no idea where to start, really ... if there's more information needed I'll edit the question. TIA!

  Read the article

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• Windows 7 installation asks for DVD drivers

  - by koen

  I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

  Read the article

• Why cant I get 3 monitors working with my ati 5770

  - by G-Dogg

  I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

  Read the article

• Notepad Automatically Launches Upon Boot Up of my Windows 7 64-Bit Desktop PC

  - by Simon

  Around 12 months ago, When my Windows 7 PC boots up, Notepad started to appear automatically on the desktop (as a duplicate ie one on top of the other), both displaying the same writing inside, and the name of the Notepad was: desktop-Notepad. [.ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787 I cant remember the exact details as its been so long now but a friend told me, this was due to a "hidden attribute" belonging to notepad becoming "unhidden"and therefore showing itself on the desktop at startup. He showed me a series of steps to either hide the attribute again or to delete it ( telling me that upon restart of my computer it would be recreated/regenerated.) I did indeed follow his guidance however after trying to hide it or delete it (it was never recreated after restart which supposedly it should have done) One notepad still is autolaunched with the text as shown above everytime I startup my PC. As I found this forum I thought I might try again for a solution to prevent notepad from launching. Thankyou

  Read the article

• Two wim files at grub4dos for USB memory

  - by WindStory

  I have Two wim files at grub4dos for USB memory, the one is win7 pe, and the other one is win 7 installation. This is the menu.lst for my USB. title 1-1. Win7PE \n find --set-root /BOOTwin7peMGR chainloader /BOOTwin7peMGR root title 1-2. Win7 Installation \n find --set-root /bootwin7installmgr chainloader /bootwin7installmgr #title root The Win7PE's wim file is located at "bcd/man7pe_Boot.wim" and "Win7 Installation"'s wim file is located at "sources/boot.wim". But when I click "Win7PE" or "Win7 Installation", usb boots "Windows 7 installation" sreen. Is there any tool for wim boot menu?

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• CHKDSK always runs on Hyper-V image

  - by Dave

  I am having a problem with one of my VM's. Every time it boots, CHKDSK runs and finds no errors, but it goes into an endless loop (CHKDSK/Reboot/CHKDSK). The only way I can get Windows to boot is by cancelling the chkdsk. Is there any way I can tell windows to not do it? What do you guys suggest? Can't redo server. I guess it's also fair to say I get the following errors in Event Viewer "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2" "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\" I only have 1 VHD attached, not sure what Volume 2 is. Thanks!

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by andybaird

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >