Search Results

Search found 1072 results on 43 pages for 'rubber boots'.

Page 21/43 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Adaptec 2420SA RAID 1 rebuild 66% after 1 week

  - by moss

  We're running a 500GB RAID 1 on an Adaptec 2420SA - 2x500GB Hitachi Drives. It suddenly crashed and required a rebuild -- was not even booting. It's only at 66% after about a week. Very frustrated. This is the second box with the same card and drives that has had issues with the RAID/drives. Another box had this happen twice. Both machines are Linux boxes. CentOS and Fedora. I dunno if it's the firmware -- which currently needs an update (any help doing this over PXE would be great- I have used UDA to do PXE boots in the past). Anyway, would love to hear about experiences with this card and firmware. I thinking of going google and just using cheap boxes no raid and have server redundancy instead.

  Read the article

• Delayed startup of network icon (wi-fi)

  - by Michael Dy

  When my Windows 7 Starter netbook boots up and after everything is loaded, it takes about five minutes before the network icon near the clock becomes functional. When there's an available wi-fi signal (which automatically connects to my netbook as preconfigured) after the boot, my netbook seamlessly connects to it even if the network icon cannot be clicked or accessed. (The icon is shown to be loading for about five minutes.) During this time, when I go to Network and Sharing Center, it takes the same time to load. So even while the icon and the Center cannot be accessed, I can surf the Internet. When my netbook was still new, it didn't have this issue. How do I fix this?

  Read the article

• just curious if anybody every tried this- hyper-v r2

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! thanks

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Linux & Windows Boot Up Times in Amazon Web Service and Windows Azure

  - by Adron

  I've been working with Windows Azure and Amazon Web Services EC2 for a good many months now (almost getting to the years range) and I've seen something over and over that seems troubling. With AWS & Linux I commonly get instance startup times with EC2 around the 1-3 minute range. With AWS & Windows OS on an EC2 instance it often takes 10-20 minutes. With Windows Azure Web or Service Role I often get anywhere from 6-30 minutes waiting for a role to startup. I assume of course this involves booting up a windows instance somewhere in the fabric. I know there has always been tons of FUD about windows vs. Linux, but I'd really like to know why it is that Windows 08 or 03 boots so much slower in the cloud than Linux. Any specific technical information regarding this would be greatly appreciated! Thanks.

  Read the article

• Merging partitions and removing windows of one partition

  - by SmartLemon

  I have two partitions on my laptop, I created a new one when installing windows 8 pro because windows 7 wouldn't upgrade to it for some odd reason. The main partition, which has 631 GB ( has windows 7 installed on it, and the second partition is 49.9 GB and has windows 8 installed on it. What I need to do is remove windows 7 from the other one (Yeah its dual booting), make it so it boots straight into windows 8, without showing the dual boot screen, and also merge the two drives together. Only problem is, I have no idea how to do this. Please don't use complete lamens terms, I am a software developer so I know at least a bit about computers. Here's disk management so you can see how its set out.

  Read the article

• How to install Mac OS X from Windows without a CD

  - by John Smith

  I have two partitions, one for windows the other for Mac OS X. Recently, my Mac OS X crashed and my partition rendered unbootable. When I insert Mac OS X's installation CD everything seems normal from startup, to choosing whether to boot from Windows or CD, until the CD boots. The screen flickers and it becomes extremely dark can barely see anything but I can see that it is booted correctly. I tried increasing brightness but that did not work. After hours of trying to read what is on the screen and guessing where to click the installation did not go through... It took more than a couple of hours so I restarted. Now the partition is accessible through Windows but is not bootable. TL;DR Is it possible to install Mac OS X on a visible partition without the CD through Windows XP?... Thanks

  Read the article

• How do you recommend installing Linux on a computer that has no external drive or ability to boot fr

  - by 7777

  I have an old Toshiba Portege 3505 "ultralight" laptop, meaning it doesn't have any kind of disk drive on it at all, that I'd like to completely reformat and install Linux on. However, it won't boot from any drive (and I don't have any on hand), so I'll have to install it from a USB drive (which I doubt it boots from either). (I'm not sure how to change the settings in my BIOS to get my computer to boot from a USB stick. Any ideas for this?) How do you recommend I do this? I want to note that I don't want to run Linux off a LiveUSB, I want to actually install it on the machine. I was thinking about Damn Small Linux, it's tiny and all I need. Any advice or suggestions for something else though? Finally, I'm a total newbie to this, I've never installed Linux on anything before so I might be a little slow on some stuff! Thanks!

  Read the article

• How to tell X.org to reload input device module?

  - by Vi

  When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again. Xorg.0.log: ... (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (--) Synaptics Touchpad: touchpad found # { rmmod psmouse && echo mem /sys/power/state && modprobe psmouse; } (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" ... How to tell X.org to try it's InputDevice again (without restarting X server)? P.S. rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Update: Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.

  Read the article

• IE9 Kiosk Mode scheduled task opens behind taskbar

  - by greg27

  I've set up a scheduled task in Windows 7 Pro to open up Internet Explorer 9 (x86 version) in kiosk mode. The scheduled task executes when a certain user logs in, and this user is logged in automatically when Windows starts. This is the command I'm using to start IE: "C:\Program Files (x86)\Internet Explorer\iexplore.exe" -k http://example.com So far so good - the computer boots up, the user gets logged in, and IE opens up in kiosk mode. The problem is that IE seems to open behind the taskbar - so the taskbar (start menu, pinned programs, etc.) appears at the bottom of the window, and the bottom of the IE window is visible through the taskbar (since the taskbar is translucent). Is there anything I can do, preferably without installing any third party programs (although I will go for that option if none other is available), to ensure that the IE9 kiosk window always opens in front of the taskbar?

  Read the article

• How to tell X.org to reload input device module? (Working around suspend-to-ram crash on Acer laptop

  - by Vi

  When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again. Xorg.0.log: ... (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (--) Synaptics Touchpad: touchpad found # { rmmod psmouse && echo mem /sys/power/state && modprobe psmouse; } (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" ... How to tell X.org to try it's InputDevice again (without restarting X server)? P.S. rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Update: Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Cannot boot to HDD or Optical when Motherboard in AHCI mode

  - by Shevek

  I have an Abit AB9 QuadGT motherboard and am trying to swap over to AHCI mode. I have an existing Windows 7 installation which was installed under IDE mode. I have set the msahci registry setting to 0. When I try to boot in AHCI mode I get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I have tried booting with my Win 7 DVD in the optical drive. There is 1 SSD (System), 1 HDD (Data) and 2 optical drives connected via SATA If I switch back to IDE mode everything boots fine, either from the SSD or from a CD or DVD in the optical drive. Why can't I use AHCI mode?

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• automatically login once windows 2003 server starts

  - by Ertugrul Tamer Kara

  I have a non-daemon server app that my windows 2003 server needs to run all the time. The problem is, every time the server restarts, be it electricity or windows update, someone needs to press ctrl alt del and enter username/password. Then the program starts, as it's in startup. How do I make windows 2003 to automatically log in to administrator or spawn a terminal services session every time the system boots? I know it's against the nature of servers and all. But this is the only thing the server does.

  Read the article

• Have a service start on startup with Ubuntu

  - by Joseph Silvashy

  I'm not clear on how to start a service when the server boots, I read on some of the other questions asked about adding the script to /etc/init.d, but It's just one line that I need to execute in the commandline: sudo /etc/init.d/avahi-daemon restart But I have a few issues with this, firstly, I apparently need to use sudo, and it gives me the following: ngl-server-01:~% sudo /etc/init.d/avahi-daemon start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service avahi-daemon start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start avahi-daemon But when I try just avahi-daemon start I get: Too many arguments Why is this? and how would you start this service?

  Read the article

• How can I stop sysprep from interacting with boot on windows 7

  - by Grofit

  I have recently had a laptop sent back to supplier for fixing a mainboard fault. I got it back today and every time it boots up I am faced with: "Setup is preparing windows for first time use" Then once it gets to the desktop I get the sysprep dialog come up asking if I want OOBC or Audit actions. I can close it, but it just keeps coming back, and I cannot find any startup or boot actions, even downloaded autoruns, and that cannot find anything to do with it. Ideally I do not want to format/fdisk as I have just spent hours installing everything on the laptop and I have my primary C:/ which has all windows and at worst case I can get rid of that, but I have a secondary partition D:/ which has alot of stuff I cant lose as its work related and important. Also to make matters more difficult I do not have a windows 7 disk, it was just pre-installed and they dont provide a disk. Any help would be great!

  Read the article

• Recover an HP recovery partition

  - by eric.chartier

  I have a (semi)-dead hard drive with an HP recovery partition on it. My goal is to Buy a new hard drive Copy the recovery partition to a drive ( dd if=/dev/sdb1 of=~/recovery.bak ) Make a new partition of 12000 mb with Windows 7 Copy back recovery partition to the new drive ( dd if=~/recovery.bak of=/dev/sdb1 ) Then press F11 when the laptop boots. However, this doesn't work. Any idea why? Edit: I suspect the F11 doesn't work because the laptop tries to boot the laptop, because my partition is the primary partition of the drive. Does anyone have any experience dealing with stuff like this?

  Read the article

• Windows 7 Keeps Changing the MBR on boot

  - by steven

  I am having an issue with Windows 7 changing the boot order everytime I start up. I have 4 partitions: boot linux windows. Grub is installed on the boot, and boots up both operating systems fine, however when I boot to Windows the bootable partition is changed to Windows and the MBR is rewritten. How do I stop this? Its rather annoying to have to boot, chroot and fix this problem everytime. I also don't want to use the Windows boot select.

  Read the article

• Jenkins swarm-plugin jar file, won't run in background

  - by JeanMertz

  We're working on an automation script for our Jenkins slaves on a local Unix server. To connect the slaves to the Jenkins master, we use the swarm plugin. Setting up the master was easy, and connecting clients is also easy with a single command. However, I am trying to get the slave command (a java application) to run in the background without stalling the current process, this doesn't seem to work. I've created an init.d file and added it to update-rc.d but that doesn't work. #!/bin/bash /usr/bin/java -jar /root/swarm-client-1.7-jar-with-dependencies.jar -executors 4 I've also tried to run it with an ampersand & to start the process in the background, but that doesn't work either because - from looking at the source - the jar file actually boots another process that is then started in the foreground. Any ideas on how to make this jar file start without stopping the bootstrap script?

  Read the article

• Computer can't boot

  - by zETO

  I have a 1 year old PC and the last weeks, when I press the ON button the PC doesn't power on ( Like I didn't press the ON button ). I have to plug and unplug a few times the power cord in order to make it work. At the start this happened once in 10 boots. Now it happens much more frequently to the point that when I press the power on button it never even opens if I don't do the cord switch thingy. Very rarely also, the PC shut downs for no reason and no warning, even when idle. The important fact to note here is, the green light on the motherboard is always on, even when the PC doesn't power on. What should I do? Is it a Power Supply failure or a motherboard? My power supply is a high end corsair model, AX850 and my motherboard a high end ASUS.

  Read the article

• How to boot windows 8 in a dual boot along with windows 7?

  - by GoldDove

  I have installed a WIndows 8 evaluation about a week ago. Usually, it asks me every time I turn on my computer whether to boot into windows 8 or windows 7. The default was windows 8 after 30 seconds. I changed that just yesterday to be default windows 7 after 5 seconds. And after I changed the setting, I went ahead and went into windows 8 and did my work. Today, when I turned on my computer, it is failing to ask me which one to boot it in. It simply boots directly into Windows 7. Is there any reason for this? Can I no longer boot into Windows 8?

  Read the article

• New graphics card (GTX 760) slowing down entire PC

  - by Cayetano Gonçalves

  My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

  Read the article

• Are SANs unreliable?

  - by chaos

  So at the place where I wear one of my various hats, this one representing a development rather than admin role, there's been an initiative to move to SANs. So far, I have been spectacularly unimpressed. First it was this behavior where, when MySQL databases are on the SAN, the first few tables that anything tries to hit after the system boots come up as nonexistent and MySQL has to be restarted before it realizes they're actually there. Then today, on multiple systems (including the primary SVN repository, ever-so-wonderfully) we get SAN mounts spewing IO errors and the filesystems going into read-only, which is the kind of behavior I expect from directly mounted naked disks, not fault-tolerant managed storage. Right now, I'm at the point where if I were putting together a project and somebody said "hey we should use SANs", my response would be "GTFO". So basically I want to know whether my experience is typical or even common, or whether I'm having some kind of freakishly bad luck with SANs. The systems these SANs are attached to are all CentOS machines, if that's relevant.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >