Search Results

Search found 2518 results on 101 pages for 'vmware esxi'.

Page 23/101 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• VMWare Server Windows 2008 NAT Problem

  - by David

  At my new job our workstations run Windows Server 2008. However, for the specific task for which I've been hired, I need to set up a couple Linux VMs. So I grabbed the free VMWare Server and created an Ubuntu image and a Slackware image. (The former to more closely mimic the production server, the latter because I'm more familiar with it.) For desktop security purposes I need to use NAT for the network access (I would have preferred bridged, but I'm told that would go against some policy here and my whole workstation would be sandboxed from the switch). However, I can't seem to get it working right. I can ping out from the VMs to LAN addresses as well as internet addresses. I can resolve DNS names. However, attempts to use a web browser or perform any kind of higher-level interaction like that just time out. Googling around yesterday led me to various workarounds that were similar, but didn't solve my specific situation. (For example, Norton firewall blocking the connection on the host, or even the Windows firewall.) I also saw some forum posts where people said it's a known issue with VMWare and Windows Server 2008 (and Windows 7). So far I haven't been able to find a suggestion that gets me past this roadblock. I'm really not very familiar with managing a Windows Server 2008 box, so it's possible there's just some security setting somewhere that I need to modify. Does anybody have any suggestions on where I should look? UPDATE: I'm now looking at the "Network and Sharing Center" on the host workstation and it shows "VMWare Network Adapter VMnet8" (which is what I'm using) as an "Unidentified network" with "No Internet access." Looks like I can't modify ICS under the group policy. Any suggestions on how to allow this connection to have internet access?

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• VMware ARP/Mac Networking

  - by Ross Wilson

  Hi Guys, I am very interested in how VMware networking works. I have scoured the VMware website and read their data sheets, this has given me some basic knowledge. I now have some questions. Lets assume that we have a physical server running the VMware hypervisor. The physical server is running a Virtual Machine. The physical box has one physical NIC. The NIC is connected to a switch, as so is a desktop client. Now, this is where my first question lies. The VM has an IP address: 192.168.1.1. How do desktop clients on the network communicate with this VM? So, the client pings 192.168.1.1. The ping packet is sent to the switch. The switch checks its MAC address table and sees that 192.168.1.1 is associated with the MAC address of the physical NIC. Correct? I then assume that the ping packet is sent to the server's physical NIC, where the hypervisor routes the packet to the VM thats using 192.168.1.1? Please could you give me a run down as to how VM networking works? Many thanks, Ross

  Read the article

• VMWare Guest Info - Wrong IP Returned

  - by Jon Bailey

  We're running a VDI environment with vSphere 4.0 and Oracle VDI 3.2.2 and are having a bit of a problem with users that connect to an IPSec VPN from within their VM. For some reason, once connected to the VPN, the VMWare API returns GuestInfo.ipAddress as the VPN IP rather than the primary IP of the only NIC on the system. The IP address shown in net[0].ipAddress is the correct address and is what vSphere client is reporting. Is there any way to get VMWare tools to report the net[0].ipAddress as GuestInfo.ipAddress? Below is sample output from the guestinfo.pl script. 172.16.1.2 is the example "bad" VPN address that our VDI software is seeing. VMXFLEX01 guestFamily: windowsGuest VMXFLEX01 guestFullName: Microsoft Windows XP Professional (32-bit) VMXFLEX01 guestId: winXPProGuest VMXFLEX01 guestState: running VMXFLEX01 hostName: VMXFLEX01 VMXFLEX01 ipAddress: 172.16.1.2 VMXFLEX01 toolsStatus: VMware Tools is running and the version is current. VMXFLEX01 toolsVersion: 8194 VMXFLEX01 Screen - Height: 600 VMXFLEX01 Screen - Width: 800 VMXFLEX01 Disk[0]: Capacity 42935926784 VMXFLEX01 Disk[0]: Path : C:\ VMXFLEX01 Disk[0]: freespace : 33272619008 VMXFLEX01 net[0] - connected : 1 VMXFLEX01 net[0] - deviceConfigId : 4000 VMXFLEX01 net[0] - macAddress : 00:50:56:95:1f:c9 VMXFLEX01 net[0] - network : VM Network VMXFLEX01 net[0] - ipAddress : 10.0.0.2

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Exchange 2010 DAG + VMWare HA = no support?

  - by Dan

  We currently have an Exchange 2003 clustered environment (two machine cluster) that we're looking to upgrade to 2010. We recently purchased a VMWare virtualization environment (three Dell R710's with an EMC NS-120 serving up NFS datastores - iSCSI is available) that we wish to use for this new environment. I'm seeing that Microsoft does not support Exchange 2010 DAGs with a virtualization high availability solution (see links below). I would like to utilize the DAG to ensure the data stays available if one host goes down, and HA to ensure that if the physical host goes down, the VM will come back up on the other available host. Does anybody know why MS does not support this? VMWare HA will only restart the VM if it is hung/down - I don't see any difference between this and restarting the physical box if someone pulled the power... Will we only run into issues with support if it has something to do with HA/DAG failover or will they see we have HA and tell us to put it on a physical box even if it has nothing to do with HA? If we disable HA for these VM's will that satisfy them on a support case? Has anybody set up an Exchange 2010 DAG on VMware with HA enabled? Will they have any issues with using an NFS datastore? We have much greater flexibility on the EMC with NFS vs iSCSI, so I would prefer to continue utilizing that. Thanks for any input! http://www.vmwareinfo.com/2010/01/verifying-microsoft-exchange-2010.html Take a look at the second image under "Not Supported" http://technet.microsoft.com/en-us/library/aa996719.aspx "Microsoft doesn't support combining Exchange high availability solutions (database availability groups (DAGs)) with hypervisor-based clustering, high availability, or migration solutions. DAGs are supported in hardware virtualization environments provided that the virtualization environment doesn't employ clustered root servers."

  Read the article

• SQL Server performance on VSphere 4.0

  - by Charles

  We are having a performance issue that we cannot explain with our VMWare environment and I am hoping someone here may be able to help. We have a web application that uses a databases backend. We have an SQL 2005 Cluster setup on Windows 2003 R2 between a physical node and a virtual node. Both physical servers are identical 2950's with 2x Xeaon x5460 Quad Core CPUs and 64GB of memory, 16GB allocated to the OS. We are utilizing an iSCSI San for all cluster disks. The problem is this, when utilizing the application under a repeated stress testing that adds CPUs to the cluster nodes, the Physical node scales from 1 pCPU to 8 pCPUs, meaning we see continued performance increases. When testing the node running Vsphere, we have the expected 12% performance hit for being virtual but we still scale from 1 vCPU to 4 vCPUs like the physical but beyond this performance drops off, by the time we get to 8 vCPUs we are seeing performance numbers worse than at 4 vCPUs. Again, both nodes are configured identically in terms of hardware, Guest OS, SQL Configurations etc and there is no traffic other than the testing on the system. There are no other VMs on the virtual server so there should be no competition for resources. We have contacted VMWare for help but they have not really been any suggesting things like setting SQL Processor Affinity which, while being helpful would have the same net effect on each box and should not change our results in the least. We have looked at all of VMWare's SQL Tuning guides with regards to VSphere with no benefit, please help!

  Read the article

• Does migrating 2 domain controllers between 2 datacentre requires both virtual machines to be shut down at the same time?

  - by Imagineer

  I was attempting to migrate 2 virtual machines that are domain controllers between 2 datacentres running ESX 3.5 and ESX 4.1. I was advised to shut down both domain controller at the same time during the migration process. This is to avoid USN Rollback and other replication issues. The following are the steps that I was planning to perform: 1. Shutdown both DC. 2. Copy both VMs files across to new datacentre using Veeam FastSCP (connection to both vCentre through IP address instead of hostname) 3. Power them up at new datacentre. 4. Configure Network interface/DNS/DHCP for both DCs in new datacentre I have tried to use Veeam FastSCP rather than VMware Standalone Converter is because its copying rather than converting. Someone also suggested that I use backup and restore app like Veeam backup and replication software. Sounds like a simple job, but after shutting down both DCs, the transfer rate using FastSCP is so slow registering only 1KB/s as oppose to the normal 1MB/s (or more). When that attempt to transfer failed, I tried to cold clone both DCs resulted in the both ESX hosts get disconnected. I have tried troubleshooting by referring to this - VMware KB - Diagnosing an ESX Server that is Disconnected or Not Responding in VirtualCenter It seems that the DNS being down is the caused of all unusual occurrence. The moment I powered up the DCs via VMware console command, the ESX host were able to connect to the vCentre again. How can I avoid such a pitfall again? Am I doing it correctly? Any help would be greatly appreciated! Thank you.

  Read the article

• VMWare web UI intermittent access on CentOS

  - by PeteWilliams

  I've got a CentOS 5.2 server that I'm trying to get set up as a development environment. As part of this, I planned to install VMWare Server 2 and set up several virtual development servers. I've got as far as installing VMWare Server 2 but access to the remote control panel is only working intermittently. If I access it through Firefox at https://127.0.0.1:8333/ui/# it usually says either: "Connection intterupted: connection was reset before the page loaded" Or "Firefox can't establish a connection to the server at 127.0.0.1" But every now and then it lets me in and I'll manage a few clicks in the web UI before it kicks me out with the following error: "The server could not complete a request (HTTP 0 ). The server encountered an unexpected condition that prevented it from fulfilling the request. If this problem persists, please contact your system administrator." I've done all the updates available in CentOS except one OpenOffice one that is causing a conflict, and I re-ran wmware-config.pl after updating the kernel. Though I went with all the defaults as I don't really know what I'm doing! I've since rebooted and nothing changed. I've also tried accessing the control panel remotely from another machine in the network and the results are the same. Does anyone have any ideas what might be causing this and how I can resolve it? I'm afraid I'm a developer playing at sys-admin, so I may be missing something obvious! Many thanks Pete Update I have now reinstalled both the operating system and VMWare and I'm still getting the same issue. I wonder if it's a result of the settings I'm putting in on the config.pl script..?

  Read the article

• VMWare Workstation 8 Disk I/O & Hard Faults

  - by Scott

  I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

  Read the article

• Configuring Vmware virtual machines to run under different IPs and PC specs

  - by Alex

  Right now I'm using a simple VmWare virtual machine with preinstalled Win 7. The IP is assigned automatically (it's the same as main OS IP). Is it possible to create several virtual machines that have different hardware specifications and different IP addresses? Here is what I mean regarding these issues: Specs: Certainly, you can easily change some specifications in the Settings menu (RAM size, HDD size), but what about advanced settings? For example: advanced settings for the Processor: is it AMD (2500+,4000+, etc.. ) or Intel (core 2, Pentium, etc..) Ram - is it Corsair 4 Gb 1333 Mhz or Kingston 2 x 2 Gb 866Mhz or something else? Hdd - Is it Seagate Barracuda 80 gb 5400 Rpm or is it Samsung 500Gb 7200 Rpm or some random SSD? Programs that work under a Virtual Machine shouldn't have a clue if that's a VmWare or not. IPs: Every program that's launched under main OS use the real IP: 93.56.xx.xx All programs that are launched under virtual machine A use IP 1: 74.78.xx.xx All programs that are launched under virtual machine B use IP 2: 84.159.xx.xx I believe that you have to use either VPN or Proxy to solve this problem. The Sum Up: The idea is to create 2-3 independent virtual machines with different hardware specifications and IP addresses. Programs that work under a certain Virtual Machine shouldn't have a clue if that's a VmWare or the real PC. Any ideas/tips or experience regarding configuration will be appreciated!

  Read the article

• Vmware player change dhcp server settings

  - by Tathagata

  I have a Windows Server 2003 running from a Vmware player on Win 7 box. The idea is to test Windows Deployment service in the virtual network. Is it possible to configure the vmware dhcp server with WDS related stuff(option 66, 67)? I found a few references where people were using the vnetlib.exe to start, stop the dhcp serverchange the subnet mask etc - but there's no info on how to get set the dhcp server options. DHCP config from the virtual network editor I do have the Workstation, without the license for it. In the Virtual network Editor, the DHCP settings for the network I'm using, only allows me to set the subnetmask, IP ranges and stuff like that. But not the dhcp options. DHCP server on the WDS server Authorizing the DHCP server in the guest WDS server fails. The VMware player can run its own dhcp server fro the virtual network with out any authorization from the Active directory - can I do the same, with Win dhcp server in the guest Win Server? ~~~~~ Can I authorize W2K8 DHCP server for private network, even when prohibited in enterprise network? says we have to run a third party dhcp server... :/.

  Read the article

• GhettoVCB.sh log is wrong

  - by Michael

  2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2 2010-02-25 16:03:02 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2010-02-25 16:03:02 -- info: ============================== ghettoVCB LOG START ============================== 2010-02-25 16:03:02 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-02-25 16:03:02 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-02-25 16:03:02 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nfs_storage_backup/vm1 2010-02-25 16:03:02 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-02-25 16:03:02 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2 2010-02-25 16:03:02 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-02-25 16:03:02 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2010-02-25 16:03:02 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-02-25 16:03:02 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-02-25 16:03:02 -- info: CONFIG - LOG_LEVEL = info 2010-02-25 16:03:02 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log 2010-02-25 16:03:02 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-02-25 16:03:02 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-02-25 16:03:02 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-02-25 16:03:02 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-02-25 16:03:02 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2010-02-25 16:03:02 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-02-25 16:03:02 -- info: CONFIG - LOG_LEVEL = info 2010-02-25 16:03:02 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB.log 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-02-25 16:03:02 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-02-25 16:03:02 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2010-02-25 16:03:13 -- info: Initiate backup for VM1 2010-02-25 16:03:13 -- info: Initiate backup for VM1 2010-02-25 16:03:13 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-02-25" for VM1 2010-02-25 16:03:13 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-02-25" for VM1 Failed to clone disk : The file already exists (39). Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/datastore1/machine/VM1.vmdk'... 2010-02-25 16:04:16 -- info: Removing snapshot from VM1 ... Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/datastore1/machine/VM1.vmdk'... How can I fix this issue, the backup is working, but the log shows something like 2 back-up's in the exact time?

  Read the article

• Why is vCenter 5.1u1 exiting hosts from maintenance mode?

  - by Shane Madden

  This vCenter server was just upgraded to 5.1 update 1. I'm going through hosts and bringing firmware up to date, then upgrading them from various versions of 5.0 to 5.1u1. vCenter 5.1u1 seems to have an interesting new behavior: it's removing hosts from maintenance mode when they reconnect after being disconnected -- but very inconsistently, I've seen it maybe 4 or 5 times on ~25-30 host reboots. I've only seen it happen on 5.0 hosts that have not yet been upgraded to 5.1. In the image, I placed the host in maint mode and rebooted it into the HP SPP DVD's automatic update mode. After its usual ~40 minute update process, the host came back online.. and 7 seconds before even logging that the host had reconnected, vCenter had sent the host a task to exit maintenance mode. In my understanding, the only time vCenter should drop a host out of maintenance mode is when vCenter put it into maintenance mode itself (such as a VUM upgrade task). Why would this vCenter be unilaterally exiting a host from user-initiated maintenance mode? Edit, additional info: I ran the firmware upgrades on 5 more hosts, all at the same time. Two of them exited maint mode after reconnecting, three did not. The common factor of those exiting maint mode seems to be how long they were offline; the two that took a few tries to boot to the virtual media are the two that got knocked out of maint mode. esx31 (image above): 45 minutes unresponsive esx19 (exited maint): 87 minutes unresponsive esx24 (stayed in maint): 32 minutes unresponsive esx29 (stayed in maint): 39 minutes unresponsive esx32 (stayed in maint): 30 minutes unresponsive esx34 (exited maint): 70 minutes unresponsive Edit: The disconnect time idea seems to have been a red herring, as it's not happening consistently. Additionally, in the vpxd.log the exit maint mode task initiation seems to always immediately follow this vim.EnvironmentBrowser.queryProvisioningPolicy SOAP call. Here's the lines, slightly trimmed for clarity: 15:27:49.535 [info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (esx31, vim.EnvironmentBrowser.queryProvisioningPolicy) 15:27:49.560 [info 'commonvpxLro'] [VpxLRO] -- BEGIN task -- esx31 -- HostSystem.exitMaintenanceMode -- Note that on the nodes that don't get the exit task, the vim.EnvironmentBrowser.queryProvisioningPolicy event still occurs. I'm not seeing any other differences in events before or after this in the reconnect process, aside from the extra events caused by exiting maintenance mode. Given the log's mention of provisioning policies, looking for autodeploy-related maintenance mode issues turns up complaints about similar behavior (though I'm not using autodeploy at all).

  Read the article

• VLAN ID 4095 for guest VLAN tagging

  - by user121282

  Just want to know if it's true that if you use the VLAN ID 4095 for guest VLAN tagging, then vMotion will not work correctly as there is nowhere to pass back the reverse arp to? So, the problem we have noticed is when we have vmotioned VM's that are tagged on our trunk network, you cannot ping them from anywhere between 30-300 seconds. The hosts don't know which VLAN the guest is on. Is this right and also the correct behaviour? Thanks

  Read the article

• NFS issue brings down entire vSphere ESX estate

  - by growse

  I experienced an odd issue this morning where an NFS issue appeared to have taken down the majority of my VMs hosted on a small vSphere 5.0 estate. The infrastructure itself is 4x IBM HS21 blades running around 20 VMs. The storage is provided by a single HP X1600 array with attached D2700 chassis running Solaris 11. There's a couple of storage pools on this which are exposed over NFS for the storage of the VM files, and some iSCSI LUNs for things like MSCS shared disks. Normally, this is pretty stable, but I appreciate the lack of resiliancy in having a single X1600 doing all the storage. This morning, in the logs of each ESX host, at around 0521 GMT I saw a lot of entries like this: 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4cf9a8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4dc9e8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4d3fa8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4de0a8 3 [....] 2011-11-30T06:16:07.042Z cpu0:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:17:01.459Z cpu2:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:25:17.887Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000a4c2b28 3 2011-11-30T06:27:16.063Z cpu3:4011)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:35:30.827Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:36:37.953Z cpu6:2054)NFS: 292: Restored connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:40:08.242Z cpu6:2054)NFSLock: 608: Stop accessing fd 0x41000a4c3e68 3 2011-11-30T06:40:34.647Z cpu3:2051)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:44:42.663Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:44:53.973Z cpu0:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:51:28.296Z cpu5:2058)NFSLock: 608: Stop accessing fd 0x41000ae3c528 3 2011-11-30T06:51:44.024Z cpu4:2052)NFSLock: 568: Start accessing fd 0x41000ae3b8e8 again 2011-11-30T06:56:30.758Z cpu4:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:56:53.389Z cpu7:2055)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T07:01:50.350Z cpu6:2054)ScsiDeviceIO: 2316: Cmd(0x41240072bc80) 0x12, CmdSN 0x9803 to dev "naa.600508e000000000505c16815a36c50d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. 2011-11-30T07:03:48.449Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000ae46b68 3 2011-11-30T07:03:57.318Z cpu4:4009)NFSLock: 568: Start accessing fd 0x41000ae48228 again (I've put a complete dump from one of the hosts on pastebin: http://pastebin.com/Vn60wgTt) When I got in the office at 9am, I saw various failures and alarms and troubleshooted the issue. It turned out that pretty much all of the VMs were inaccessible, and that the ESX hosts either were describing each VM as 'powered off', 'powered on', or 'unavailable'. The VMs described as 'powered on' where not in any way reachable or responding to pings, so this may be lies. There's absolutely no indication on the X1600 that anything was awry, and nothing on the switches to indicate any loss of connectivity. I only managed to resolve the issue by rebooting the ESX hosts in turn. I have a number of questions: What the hell happened? If this was a temporary NFS failure, why did it put the ESX hosts into a state from which a reboot was the only recovery? In the future, when the NFS server goes a little off-piste, what would be the best approach to add some resilience? I've been looking at budgeting for next year and potentially have budget to purchase another X1600/D2700/disks, would an identical mirrored disk setup help to mitigate these sorts of failures automatically? Edit (Added requested details) To expand with some details as requested: The X1600 has 12x 1TB disks lumped together in mirrored pairs as tank, and the D2700 (connected with a mini SAS cable) has 12x 300GB 10k SAS disks lumped together in mirrored pairs as sastank zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c7t0d0s0 ONLINE 0 0 0 errors: No known data errors pool: sastank state: ONLINE scan: scrub repaired 0 in 74h21m with 0 errors on Wed Nov 30 02:51:58 2011 config: NAME STATE READ WRITE CKSUM sastank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t14d0 ONLINE 0 0 0 c7t15d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t16d0 ONLINE 0 0 0 c7t17d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t18d0 ONLINE 0 0 0 c7t19d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t20d0 ONLINE 0 0 0 c7t21d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t22d0 ONLINE 0 0 0 c7t23d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t24d0 ONLINE 0 0 0 c7t25d0 ONLINE 0 0 0 errors: No known data errors pool: tank state: ONLINE scan: scrub repaired 0 in 17h28m with 0 errors on Mon Nov 28 17:58:19 2011 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t1d0 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 c7t6d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t8d0 ONLINE 0 0 0 c7t9d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t10d0 ONLINE 0 0 0 c7t11d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t12d0 ONLINE 0 0 0 c7t13d0 ONLINE 0 0 0 errors: No known data errors The filesystem exposed over NFS for the primary datastore is sastank/VMStorage zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 45.1G 13.4G 92.5K /rpool rpool/ROOT 2.28G 13.4G 31K legacy rpool/ROOT/solaris 2.28G 13.4G 2.19G / rpool/dump 15.0G 13.4G 15.0G - rpool/export 11.9G 13.4G 32K /export rpool/export/home 11.9G 13.4G 32K /export/home rpool/export/home/andrew 11.9G 13.4G 11.9G /export/home/andrew rpool/swap 15.9G 29.2G 123M - sastank 1.08T 536G 33K /sastank sastank/VMStorage 1.01T 536G 1.01T /sastank/VMStorage sastank/comstar 71.7G 536G 31K /sastank/comstar sastank/comstar/sql_tempdb 6.31G 536G 6.31G - sastank/comstar/sql_tx_data 65.4G 536G 65.4G - tank 4.79T 578G 42K /tank tank/FTP 269G 578G 269G /tank/FTP tank/ISO 28.8G 578G 25.9G /tank/ISO tank/backupstage 2.64T 578G 2.49T /tank/backupstage tank/cifs 301G 578G 297G /tank/cifs tank/comstar 1.54T 578G 31K /tank/comstar tank/comstar/msdtc 1.07G 579G 32.8M - tank/comstar/quorum 577M 578G 47.9M - tank/comstar/sqldata 1.54T 886G 304G - tank/comstar/vsphere_lun 2.09G 580G 22.2M - tank/mcs-asset-repository 7.01M 578G 6.99M /tank/mcs-asset-repository tank/mscs-quorum 55K 578G 36K /tank/mscs-quorum tank/sccm 16.1G 578G 12.8G /tank/sccm As for the networking, all connections between the X1600, the Blades and the switch are either LACP or Etherchannel bonded 2x 1Gbit links. Switch is a single Cisco 3750. Storage traffic sits on its own VLAN segregated from VM machine traffic.

  Read the article

• Best way to provide redundant switching/links to server

  - by Myles Gray

  We have 3x ESX hosts and 2x SANS that we wish to move to a redundant 10G networking infrastructure. We have 4x Dell PowerConnect 8024F's to provide our backbone and are configured as so (only core switches relevant to this question): So the questions are: 1) Do the interconnects between the 4x 8024F's need to be LAG'd or just STP'd 2) As the NICs on the servers are split across 2 switches, does any special configuration need to be done here or on the switches? 3) If a link or switch fails will the switches automatically find a new path to the Server/SAN?

  Read the article

• Question about VMWare thin provisioning

  - by Datapimp23

  I'm playing around with virtual disks and thin provisioning and have a question about it. I've created several disks and allocated space to with thin provisioning. Is it possible to allocate more disk space than the maximum amount of the datastore space. So that for example, my VM's will stop functioning when the disks slowly start filling up?

  Read the article

• Why do I have to manually 'Restart Management Network' on vSphere 5 host after reboot to get networking available?

  - by growse

  I've got a couple of vSphere 5.0 hosts in a small lab environment here and I've noticed a strange behaviour. When on of the hosts gets rebooted, it is unresponsive to the network until I log into the ESX console, Press F2 to customize and select Restart management network. Once this is done, the networking works perfectly as expected. Each host has two NICs which are trunked together using Etherchannel to a Cisco 3750. The link is also a .1q VLAN trunk and the management network is configured on VLAN121 with the VM traffic configured on VLAN118. Why would the host be completely dead to the world until I physically kick it? Edit Sample switch config for trunk: interface Port-channel2 description Blade 1 EtherChannel Trunk switchport trunk encapsulation dot1q switchport mode trunk end ! ! interface GigabitEthernet4/0/1 description Bladecenter1 CPM 1A switchport trunk encapsulation dot1q switchport mode trunk speed 1000 duplex full channel-group 2 mode on end Vswitch teaming settings: Management port group settings:

  Read the article

• Deployment from OVA format

  - by Manvendra Bele

  I am deploying a VM using a OVA format. The size of OVA format is 57 GB. Currently free space on my datastore is 388 GB. At the time of selecting Disk Format type if shows me in red that the disk size required is 1 TB therefore you cannot select THICK provisioning. Therefore, i selected THIN provisiong. It THIN provisioing i am showed that Estimated Disk Usage is 112 GB which is less than the free space available. But even after selecting THIN proviosing at the time of deployment it throws an error that it cannot create disk as the size of disk is larger than the maximum specified limit. My block size is of 1 MB. Pasting my exact error here: Failed to deploy OVF package:File [datastore1] IMS Tester 1/IMS Tester1_2.vmdk is larger than maximum size supported by datastore 'datastore1

  Read the article

• vmware nat internet connection

  - by ziftech

  Host: Windows Server 2008 / VMWare Server 2 Has Internet connection ip: 172.17.62.1 (NAT adapter) no gateway, no dns Guest: Windows Server 2003 ip: 172.17.62.2 (NAT) gateway 172.17.62.5 (set in VMware network manager for NAT) Host and guest can see each other, but guest have no internet connection (only ping by ip) In what may be the problem? HOST Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1c1:3518:abb4:c05%24(Preferred) IPv4 Address. . . . . . . . . . . : 172.17.67.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CF-8C-9F-40-61-86-2B-8F-AD DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST DNS-suffix . . : Description. . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical. . . . . . . . . : 00-0C-29-71-A5-43 DHCP . . . . . . . . . . . : no ip . . . . . . . . . . . . : 172.17.67.2 subnet mask . . . . . . . . . . : 255.255.255.0 gateway . . . . . . . . . . : 172.17.67.5 DNS . . . . . . . . . . . . : 8.8.8.8 All firewalls are down, I can ping hosts, but no telnet connection - telnet google.com 80

  Read the article

• What should I set so that VMware tools is running after a guest reboots or comes back from sleep?

  - by Thierry Lam

  On my Ubuntu 10.04 Server guest VM running from VMware fusion, the VMware tools doesn't seem to be running after a reboot or my computer comes back from stand-by or sleep(when I close my MacBook lid): $ /etc/init.d/vmware-tools status vmware-guestd is not running I did try running it as a service but the tools would still not run after coming back from stand by: sudo service vmware-tools start Any ideas what I should do to make the tools run all the time? My Ubuntu Server can only be accessed from the CLI, I won't be able to try any GUI solution.

  Read the article

• How do I make ESXi 5.0 to shutdown virtual machines when the physical power button is pushed?

  - by Pawel Sawicki

  I have a home NAS/DLNA server built out of an HP Micro Server with the HP branded VMware ESXi 5.0.0 build-623860 (free license) installed. Being a home media center I'd like it to be "manageable" by all my household members. This requires that it needs to be powered on an off (including all the VMs inside) by anybody with the physical access to the server by simply pressing the power button on the chassis. The "startup" part is easy to obtain - all I had to do was to configure the startup/shutdown policy: Once the server powers up, all VMs start as well and that's exactly what I need. Well.. it did work up until 5.0.0U1, but that's a different story: http://blogs.vmware.com/vsphere/2012/03/free-esxi-hypervisor-auto-start-breaks-with-50-update-1.html Unfortunately, pressing the power button doesn't gracefully shutdown the guest machines - they are terminated instead. If I run the "shut down" command from the vSphere Client interface guests are powered off. I'd like to get the same end result when the physical power button is switched. I've poked around a bit on the ESXi server. There's a "/sbin/shutdown.sh" script that seemed to do exactly what I need... but after trying it does exactly what the power off button. The "/etc/inittab" contains an entry for the "shutdown" level but I suppose it's not hooked to the power button. I can't find any acpi related configuration, neither do I know what exactly is executed when the power button is pressed. Does anybody have a clue how can I make the VMs shutdown automatically when the physical power switch is pressed to turn of the computer?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >