Search Results

Search found 7669 results on 307 pages for 'dealing with clients'.

Page 234/307 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• Subversion Edge LDAP (require CAC Certificate not Username and Password)

  - by Frank Hale

  What I've Done: I've successfully installed and configured Subversion Edge 3.1.2 with LDAP support on a Windows 2008 server. I have configured LDAP users and am able to use LDAP credentials to work on repositories just fine. No issues whatsoever. Works great! What I Want To Do: I've been searching for several hours now in hopes to find some information on how to configure Subversion Edge server to require client certificates for user authentication against an LDAP environment. I have not found anything yet that gives me an indication of how to do it. I know there are SVN clients that are capable of prompting for CAC certificates but I cannot figure out how to set my server up to require it. NOTE: CAC authentication is already setup and working in the windows environment. Desired Outcome: When running svn commands that require authentication against my Subversion Edge Server I want it to prompt me for my CAC certificate instead of my Active Directory username and password. If anyone has any information on this I'd greatly appreciate it. EDIT: I'm still digging so if I find out anything I'll update this question with what I found.

  Read the article

• samba "username map" stopped to work after upgrade to 3.6

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• Architecture for highly available MySQL with automatic failover in physically diverse locations

  - by Warner

  I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• AD User Passwords expiring without any notifications?

  - by scooter133

  We setup password Policies in Active Directory to Expire peoples passwords after so many days. Well it looks like the time has come for the Expiration of the Passwords and people are getting locked out... There has been no warning of user passwords about to expire. They just come in to work and they cannot log in, the phones no longer connect, nothing. Reset the password and all is good. Some of the users are locked out, though most are not, they just cannot log in. On setting the password Expiration, I didn't see anything about nor warning the users of the impending expiration. Seems like it used to warn you 15 days or so before it would expire. Clients range from: WinXP, WinVista, Win7 and Server 2008R2 Remote Desktop Services. How can I make sure my users are warned of the Expiration? Resultant Set of Policy for User that was not prompted: Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 10 passwords remembered Default Domain Policy Maximum password age 270 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 4 characters Default Domain Policy Password must meet complexity requirements Disabled Default Domain Policy Store passwords using reversible encryption Disabled Default Domain Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 20 minutes Default Domain Policy Account lockout threshold 5 invalid logon attempts Default Domain Policy Reset account lockout counter after 15 minutes Default Domain Policy Local Policies/Audit Policy Policy Setting Winning GPO Audit account logon events Failure Default Domain Policy Audit account management Success, Failure Default Domain Policy Audit directory service access Success, Failure Default Domain Policy Audit logon events Failure Default Domain Policy Audit policy change Success, Failure Default Domain Policy Audit privilege use Failure Default Domain Policy Local Policies/Security Options Interactive Logon Policy Setting Winning GPO Interactive logon: Prompt user to change password before expiration 7 days Default Domain Policy

  Read the article

• Monitoring outgoing messages using EXIM

  - by dashmug

  I work as an IT guy in a law firm. I am recently asked to make a system wherein all the outgoing emails coming from our server to our clients will be put on hold first and wait for approval before it gets sent to the client. Our mail server uses Exim (that's what it says in cPanel). I am planning to create filters where the outgoing emails will be forwarded to an editor account. Then, the editor will review and edit the contents of the email. When the editor already approves the email, it will then get sent to the client by the editor but still using the original sender in the "From:" and "Reply-To:" field. I found some pointers from this site = http://www.devco.net/archives/2006/03/24/saving_copies_of_all_email_using_exim.php. Once the filters are in place, I want to make a simple PHP interface for the editor to check the forwarded emails and edit them if necessary. The editor can then click on an "Approve" button that will finally deliver the message using the original sender. I'm also thinking that maybe a PHP-less system will be enough. The editor can receive the emails from his own email client edit them and simply send the email as if he is the original sender. Is my plan feasible? Will there be issues that I have overlooked? Does it have the danger of being treated as spam by the other mailservers since I'll be messing up the headers?

  Read the article

• Iptables Forwarding problem

  - by ankit

  Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• MS licensing of multiple RDP sessions for non-MS products in Windows XP Pro

  - by vgv8

  Question 1) and 2) were moved into separate thread Which Windows remote connections bypass LSA? and what r definitions of login vs. logon session? 3) Do I understand correctly that multiple remote RDP sessions are supported by Windows XP but require additional (or modified) licensing? Which one? Or it is always illegal to run multiple RDP sessions on Windows XP? even through non-MS commercial software? ---------- Update1: I already understood my error - the main questions were about definitions (important to find the common language with others) and the licensing questions were collateral - but it was already answered. I shall try to separate these questions leaving here the questions about RDp licensing and migrating other questions into separate thread ---------- Update2: Trying to "work around" licensing terms is pointless and wasteful of time I never try "working around" and I never ask anything like this, I am not specialist in licensing. My clients/employers provide me with tools and licensing support. They have corporate lawyers, planning/accounting/purchase departments for these issues. The questions that I ask is the matter of scalability and efficiency (saving my and others time) in my developing work. For ex., Just because I need autentication against Windows AD it is time-saving to use ADAM instead of deploying full-fledged AD with DC + servers + whatever else? Nobody is forcing you to use Windows XP I shall not rush into re-installing all my operating systems on all my development machines (at home, at client premises) just because a few guys have a lot of fun downvoting development-related questions in serverfault.com. If I do so, I make a joker from me in the eyes of my clolleagues et al Update: I unmarked this question as answered since it had not even adressed the question, at least mine. Should I understand that Terminal Server PRO, allowing Windows® XP and Windows® Small Business Server 2003 to host multiple remote desktop sessions, is illegal? Related: My answer to question Has windows XP support multiple remote login session (RDP) at a time?

  Read the article

• Managing ip6tables (or an alternative firewall) remotely

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• Server 2003 Terminal Services Printers not redirecting, no sessions created.

  - by mikerdz

  Ok, odd scenario on a Windows Server 2003 Server Standard running as Terminal Server. Friday, installed 2 new Windows 7 machines to replace older XP machines. After adding these machines and their local printers, none of the otehr 16 Windows 7 machines can redirect printing to the server. I have checked Global Policy on domain controller, nothing is being blocked. In Terminal Services Manager, the client settings are set to User Client Settings. On RDP client, port redirection is enabled. I have tried disabling the Use Client Settings option and manually selected the options for print redirection and default printer connection, but still does not work. After some reaserching, I found this MS article: http://support.microsoft.com/kb/2492632 I went ahead and added the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\fEnablePrintRDR DWORD that the article references and set it to "1" to enable the option. I restarted the server, but still would not print. I am getting quite desperate with this issue because nothing seems to have changed when installing the two new clients and printers. I uninstalled the print drivers for the printers from the server. I have even gone as far as connecting each of the printers manually via UPD (\computername\printer) but even thought it works, it prints awfully slow. Please help!!!!

  Read the article

• Understanding Exchange User Monitor (ExMon) Output

  - by SturdyErde

  I recently downloaded and ran ExMon while trying to troubleshoot Outlook connectivity problems due to high CPU usage on Exchange Server 2010 SP2 UR8. The tool provides a great set of data, but I have not yet figured out how to make great use of it. My first question is why the Exchange Server itself shows up as a high-use MAPI client in the ExMon data. Among the users' client versions I see build numbers listed for Outlook 2013, 2010, and yes, even 2007 clients. I also see build number 14.2.387.0, which represents Exchange Server 2010 SP2 Update Rollup 8 (+/- some other patch that makes it not quite match the UR8 number). There are many user rows that list only "::1" and/or the short hostname of my Exchange server in the 'Client IP Addresses' column. Some other columns include the end-user's actual IP address and the Exchange server's IP address. ExMon shows that it is actually Exchange Server that is utilizing the highest percentage of CPU that is used for MAPI calls. I had expected to see 1 IP address and version number for each user reported by ExMon. Instead, most records show multiple version #'s (Exchange ver and Outlook ver) and multiple IPs (Exchange IP and client IP). Can anyone explain the reason for this to me, please?

  Read the article

• Dos/ Flood Lag even though Port not Saturated

  - by Asad Moeen

  My GameServers had been under some UDP Floods due to which they generated outputs to the attacker which gave the GameServers some huge lags. Thanks to friends at ServerFault that upon different kind of testing, I was able to successfully block the attack. My question is actually something else but it is important to know how the GameServers reacted to the attack and if the machine kept stable or not: 300kb/s Input would cause GameServer to generate 2mb/s Output. So as the Input Rate kept increasing, output rate would reach so high that it would no longer be possible for the GameServer to control it and hence it would give a huge Lag until the attack is stopped. Usually the game server starts to lag when it sends out something greater than 5mb/s and under that is controllable. Theoretically, I was able to receive a 60mb/s output from my GameServer on inputting 10mb/s. Its just the way the GameServer works if not protected. Now on some of my machines, only the GameServer under attack lagged and although the server was generating 60mb/s output, rest of the gameservers on other ports would run fine without lags on the same machine. But there was another machine which also runs on a 100 MBPS Network port, even 1 mbps input ( and ZERO output because attack is blocked ) even on an unused port would give a constant yellow line ( on the Lag-o-Meter ) to all the clients on all GameServers indicating lag because that line is actually blue under normal conditions. It would remain the same even on 50mbps or 900mbps input. I tried contacting the host about it because I believe its the way their Network is bridged, but they can't help me about it. Anyone else knowing about such issues because if 900mbps input does not Saturate the port, how can 1mbps input lag the servers although port is not saturated and enough bandwidth is available?

  Read the article

• Remote management interface for managing ip6tables (or an alternative firewall)

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• Is there a Windows 7 compatible IPSec VPN client that allows protocol and port specific rules?

  - by Sani Huttunen

  As the title says, I need to find a IPSec VPN client for Windows 7. On XP and Vista we've used SafeNet SoftRemote in which you can set up rules for specific protocols and ports. But SoftRemote isn't compatible with Windows 7. 172.xxx.xxx.1 TCP 1433 172.xxx.xxx.2 TCP 1433 172.xxx.xxx.10 ALL ... Since the VPN gateway is configured this way the client must mirror these settings. I've tried TheGreenBow, NCP Secure Entry, Cisco VPN Client and Shrew Soft VPN but none of these allows you to configure by protocol and port. Does anyone have any other suggestions? EDIT: Forgot to mention that agressive mode is also a requirement. --UPDATE-- I've got some news... I've managed to get SoftRemote to work on Windows 7 x64 through Windows XP Mode. After scouring all corners of the Internet for idéas I had enough information to construct a working solution. This solution will probably benefit other clients as well! You'll find a post here with detailed instructions of how I went about.

  Read the article

• IIS6 Virtual SMTP server isn't coming back up automatically after a system restart

  - by Julian James

  I've got a virtual server running Win2008 RC2. I've set up IIS6 with a virtual SMTP server on it to be the mail provider for the websites I'm hosting there. It all works great, but if for some reason the server reboots (auto updates are still enabled - I'm trying to make this as little work as possible as we've got a Lot of clients), the IIS6 doesn't restart the SMTP server. The failure causes 500 errors on the current setup, so I'm spending half the day apologising. Any ideas? In Services I've set everything to come back up automatically, but still no dice. As soon as I restart the SMTP, no problems, all the mail gets sent. It's working perfectly, it just won't restart on it's own. I'd really rather not turn auto updates off as we're such a small company I just can't spare the time to be manually updating 15 copies of windows every time MS decide there's a security patch. All advice appreciated! BTW, I am a complete newb to these forums. I searched but couldn't find an answer, so please be nice. But firm. I've got to learn here.

  Read the article

• Apache MaxClients doubt

  - by Milan Babuškov

  I have a busy Apache server serving only dynamic PHP+MySQL pages. It is a prefork Apache, version 2.2.4 with following config: KeepAlive off StartServers 8 MinSpareServers 32 MaxSpareServers 64 ServerLimit 512 MaxClients 512 MaxRequestsPerChild 4000 MaxClients/ServerLimit used to be set to 256, but I got the following error in error_log so I increased it: [error] server reached MaxClients setting, consider raising the MaxClients setting It seems to work now, but I have a doubt. Looking at MySQL log of queries, I have a couple hundred clients per seconds, but "ps ax" only shows 8, 9 or 10 processes running: [root@engine ~]# ps ax | grep http | wc -l 10 I even got this many processes when the above error message was shown in error_log. This made me investigate further. When I run netstat -a, I get something like this: tcp 0 0 engine:http adsl-105-143.teol.net:21453 TIME_WAIT tcp 0 0 engine:http 118-36.static.kds:mck-ivpip TIME_WAIT tcp 0 0 engine:http 118-36.static:oce-snmp-trap TIME_WAIT tcp 0 0 engine:http 118-36.static.kd:unifyadmin TIME_WAIT tcp 0 0 engine:http cable-188-2-25-29.dyna:4906 TIME_WAIT tcp 0 0 engine:http adsl-105-143.teol.net:21458 TIME_WAIT tcp 0 0 engine:http 109-92-83-91.dynamic.:62821 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63576 TIME_WAIT tcp 0 0 engine:http 109-92-83-91.dynamic.:62819 TIME_WAIT tcp 1081 0 engine:http pttnetadsl38-36.ptt.r:50496 ESTABLISHED tcp 0 0 engine:http cable-188-2-36-196.dyn:4136 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63580 TIME_WAIT tcp 0 0 engine:http cable-89-216-142-192.:63581 TIME_WAIT etc. When counting those, I get: [root@engine ~]# netstat -a | grep http | wc -l 431 Can anyone tell me what is really going on here and how to make sure my server keeps working, because I only use 50% of available RAM in machine?

  Read the article

• simple apache2 reverse proxy setup not working

  - by Nick

  I know what proxy is (very high level), it's just I have never set up one, and it feels like I might be missing some big fat point here. My setup: client server (static IP), runs apache on port 80 proxy (has 2 network cards, one is on the clients network, the other one with a static IP on the server network), runs apache on port 80 I am trying to configure these three machines so that when client requests: http://proxy/machine1 It gets served server's pages at server root URL, i.e. http://server/ I can access client pages just fine. However, when I try accessing a page from the client machine, it simply gets redirected to server's IP address, which it clearly can't access since they are not on the same network: ... <meta http-equiv="REFRESH" content="0;url=http://server/machine1"></meta> <title>Redirect</title> ... My apache2 config is: LoadModule proxy_module /modules/mod_proxy.so LoadModule proxy_http_module /modules/mod_proxy_http.so ProxyRequests off <Proxy *> Order Allow,Deny Allow from all </Proxy> ProxyPass /machine1 http://server:80 <Location /machine1> ProxyPassReverse / </Location> What gives? Thanks!

  Read the article

• Remote search system for samba shares

  - by fostandy

  I have several shares residing on a samba server in a small business environment that I would like to provide search facilities for. Ideally this would be something like google desktop with some extra features (see below), but lacking this the idea is to take what I can get, or at least get an idea for what is out there. Using google desktop search as a reference model, the principle additional requirement is that it is usable from clients over the network. In addition there are some other notes (note that none of these are hard requirements) The content is always files, residing on a single server, accessible from samba shares. Standard ms office document fare Also a lot of rars and zips which it is necessary to search inside. Permissions support, allowing for user-based control to reflect current permission access in samba shares. The userbase will remain fairly static, so manual management of users is fine. majority of users will be Windows based I know there are plenty of search indexers out there: beagle and tracker seem to be the most popular. Most do not seem to offer access control and web-based/remote search does not seem to be high priority. I've also seen a recent post on the samba mailing list asking for pretty much the exact same thing. (They mention a product called IBM OmniFind Yahoo! Edition and while their initial reception seems positive, I am pretty skeptical. RHEL 4? Firefox 2? Updated much?) edit: similar question here What else is out there? Are you in a similar situation? What do you use?

  Read the article

• How to prevent samba from holding a file lock after a client disconnects?

  - by Jean-Francois Chevrette

  Here I have a Samba server (Debian 5.0) thats is configured to host Windows XP profiles. Clients connects to this server and work on their profiles directly on the samba share (the profile is not copied locally). Every now and then, a client may not shutdown properly and thus Windows does not free the file locks. When looking at the samba locking table, we can see that many files are still locked even though the client is not connected anymore. In our case, this seems to occur with lockfiles created by Mozilla Thunderbird and Firefox. Here's an example of the samba locking table: # smbstatus -L | grep DENY_ALL | head -n5 Pid Uid DenyMode Access R/W Oplock SharePath Name Time -------------------------------------------------------------------------------------------------- 15494 10345 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user1 app.profile/user1.thunderbird/parent.lock Mon Nov 22 07:12:45 2010 18040 10454 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user2 app.profile/user2.thunderbird/parent.lock Mon Nov 22 11:20:45 2010 26466 10056 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user3 app.profile/user3.firefox/parent.lock Mon Nov 22 08:48:23 2010 We can see that the files were opened by Windows and imposed a DENY_ALL lock. Now when a client reconnects to this share and tries to open those files, samba says that they are locked and denies access. Is there any way to work around this situation or am I missing something? Edit: We would like to avoid disabling file locks on the samba server because there are good reasons to have those enabled.

  Read the article

• Setup 2003 R2 Radius server to work on vista/seven

  - by Fox

  Hi All, I'm currently trying to configure my 2003 R2 server RADIUS module to enable WIFI client to authenticate throught my Active Directory. The RADIUS server use MS-CHAP V2 as encryption method. I got several Access Point running DD-WRT, configured to use WPA2-Enterprise security that use Radius Server. Everything is setup, and almost working. When I say almost working, I mean, I can login using my AD Credential on my IPod or even on a MacBook running OS X, Windows XP also work with some little tweak in connection properties. The problem is Windows Vista or Windows Seven clients computers that are not inside domain. It doesn't work at all, it doesn't even prompt for user/password/domain. I already install the patch for IAS to make the certsrv compatible with Vista and Seven, but still doesn't work. Anyone ever encounter the same issue I have right now? I'm searching for a solution to this for several already and still not find anything. Looks like many people have the same issue too. Thanks all for you eventual answers.

  Read the article

• Remote desktop type software that the client need not install anything...

  - by allentown

  I am primarily a Macintosh user, and can usually walk a client though any troubles they may have because I have a Macintosh in front of me. If they are on a different OS, things are close enough, or I cam remember, that I can get by. When trying to help clients on Windows, I get stuck. I do not have access to windows, and even if I did, there are far too many versions of Outlook, all with their various esoteric settings and checkboxes, that I could never see exactly what they are seeing. I mostly need to just help them with email setup. Something like copilot.com may do the trick. What is the simplest remote control software out there, ideally, it would accomplish these: No software needed on remote end, or, a single .exe that they can toss when done. I need Mac based software on my end. I do have ARD, which support VNC Free :) If possible, it would be really nice Needs a port forwarding proxy run by the company. There is no way I can get the user to alter their router, or to even plug directly into their WAN for a short time. On the Mac, I just have them open iChat, and this is all built in, proxying through AIM, looking for the same for Windows and Mac.

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >