Search Results

Search found 7506 results on 301 pages for 'parameter sniffing'.

Page 234/301 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

  • ASP.NET MembershipProvider and StructureMap

    - by Ben
    I was using the default AspNetSqlMembershipProvider in my application. Authentication is performed via an AuthenticationService (since I'm also supporting other forms of membership like OpenID). My AuthenticationService takes a MembershipProvider as a constructor parameter and I am injecting the dependency using StructureMap like so: For<MembershipProvider>().Use(Membership.Provider); This will use the MembershipProvider configured in web.config. All this works great. However, now I have rolled my own MembershipProvider that makes use of a repository class. Since the MembershipProvider isn't exactly IoC friendly, I added the following code to the MembershipProvider.Initialize method: _membershipRepository = ObjectFactory.GetInstance<IMembershipRepository>(); However, this raises an exception, like StructureMap hasn't been initialized (cannot get instance of IMembershipRepository). However, if I remove the code and put breakpoints at my MembershipProvider's initialize method and my StructureMap bootstrapper, it does appear that StructureMap is configured before the MembershipProvider is initialized. My only workaround so far is to add the above code to each method in the MembershipProvider that needs the repository. This works fine, but I am curious as to why I can't get my instance in the Initialize method. Is the MembershipProvider performing some internal initialization that runs before any of my own application code does? Thanks Ben

    Read the article

  • Charset and POST request

    - by jriff
    Hi All! I have a Rails 2.3.5 application that is working fine with UTF-8 and international characters. Now I have made some integration to a payment gateway where I POST some data, wait a while and get a POST back. The problem is that when I get that post back the international characters are broken. Instead of "sørensen" I get: "sørensen". If I do an iconv -fISO-8859-1 -tUTF8 it gets correctly converted to the former (I do that from a OS X command prompt). I have examined the POST request with logger.info(request.headers.inspect) in my controller and I can see that no charset parameter is given. As far as I can see the POST from the gateway must be UTF8 since one character (ø) gets translated to two (ø). So why does Rails think that the POST is ISO-8859-1? I know that one solution is to simply convert the params-hash with Iconv in the controller but I would like to know what is happening. Thanks in advance. Regards, Jacob

    Read the article

  • Controller Index methods with different signatures

    - by Narsil
    I am trying to get my URLs in files/id format. I am guessing I should have two Index methods in my controller, one with a parameter and one with not. But I get this error message in browser below. Anyway here is my controller methods: public ActionResult Index() { return Content("Index "); } // // GET: /Files/5 public ActionResult Index(int id) { File file = fileRepository.GetFile(id); if (file == null) return Content("Not Found"); return Content(file.FileID.ToString()); } Error: Server Error in '/' Application. The current request for action 'Index' on controller type 'FilesController' is ambiguous between the following action methods: System.Web.Mvc.ActionResult Index() on type FileHosting.Controllers.FilesController System.Web.Mvc.ActionResult Index(Int32) on type FileHosting.Controllers.FilesController Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Reflection.AmbiguousMatchException: The current request for action 'Index' on controller type 'FilesController' is ambiguous between the following action methods: System.Web.Mvc.ActionResult Index() on type FileHosting.Controllers.FilesController System.Web.Mvc.ActionResult Index(Int32) on type FileHosting.Controllers.FilesController Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [AmbiguousMatchException: The current request for action 'Index' on controller type 'FilesController' is ambiguous between the following action methods: System.Web.Mvc.ActionResult Index() on type FileHosting.Controllers.FilesController System.Web.Mvc.ActionResult Index(Int32) on type FileHosting.Controllers.FilesController] System.Web.Mvc.ActionMethodSelector.FindActionMethod(ControllerContext controllerContext, String actionName) +396292 System.Web.Mvc.ReflectedControllerDescriptor.FindAction(ControllerContext controllerContext, String actionName) +62 System.Web.Mvc.ControllerActionInvoker.FindAction(ControllerContext controllerContext, ControllerDescriptor controllerDescriptor, String actionName) +13 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +99 System.Web.Mvc.Controller.ExecuteCore() +105 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +39 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +7 System.Web.Mvc.<c_DisplayClass8.b_4() +34 System.Web.Mvc.Async.<c_DisplayClass1.b_0() +21 System.Web.Mvc.Async.<c__DisplayClass81.<BeginSynchronous>b__7(IAsyncResult _) +12 System.Web.Mvc.Async.WrappedAsyncResult1.End() +59 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +44 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +7 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8677678 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155

    Read the article

  • Delete array of size 1

    - by Arne
    This is possibly a candidate for a one-line answer. I would like know it anyway.. I am writing a simple circular buffer and for some reasons that are not important for the question I need to implement it using an array of doubles. In fact I have not investiated other ways to do it, but since an array is required anyway I have not spent much time on looking for alternatives. template<typename T> class CircularBuffer { public: CircularBuffer(unsigned int size); ~CircularBuffer(); void Resize(unsigned int new_size); ... private: T* buffer; unsigned int buffer_size; }; Since I need to have the buffer dynamically sized the buffer_size is neither const nor a template parameter. Now the question: During construction and in function Resize(int) I only require the size to be at least one, although a buffer of size one is effectively no longer a buffer. Of course using a simple double instead would be more appropriate but anyway. Now when deleting the internal buffer in the destructor - or in function resize for that matter - I need to delete the allocated memory. Question is, how? First candidate is of course delete[] buffer; but then again, if I have allocated a buffer of size one, that is if the pointer was aquired with buffer = new T[0], is it still appropriate to call delete[] on the pointer or do I need to call delete buffer; (without brackets) ? Thanks, Arne

    Read the article

  • cells order changes in UITableView after reloadSections: method

    - by user304895
    I'm having a problem using a grouped UITableView, and after 3 days of searching, I didn't found the solution... Actually, I have a Grouped table, composed of two sections : The first section contains a UISegmentedControl with three buttons : button0, button1 and button2. When clicking on the button0, I want to show two cells in the second section, with embedded UITextField in each cell. When clicking on the button1, I want to show one cell in the second section with an embedded UITextField. When clicking on the button2, I have to show the camera in ModalView (I think it will be ok). I've also put placeholders in each UITextField. Each time a button is clicked, I call a pickOne: method in order to update my view. In this method, I construct a NSIndexSet with NSRange of (1, 1), and then I call the reloadSections: method from the UITableViewController with NSIndexSet as a parameter. When the view appears for the first time, everything is ok, but when I click many times on the buttons, the order of the cells changes (cells containing the two textFields for the button0), and the new placeHolders are written over the old ones. Even more, sometimes when I click on the button0, it shows me only the second cell... Do you have any idea ? or need some code ? Thank you :)

    Read the article

  • Code Golf: Tic Tac Toe

    - by Aistina
    Post your shortest code, by character count, to check if a player has won, and if so, which. Assume you have an integer array in a variable b (board), which holds the Tic Tac Toe board, and the moves of the players where: 0 = nothing set 1 = player 1 (X) 2 = player 2 (O) So, given the array b = [ 1, 2, 1, 0, 1, 2, 1, 0, 2 ] would represent the board X|O|X -+-+- |X|O -+-+- X| |O For that situation, your code should output 1 to indicate player 1 has won. If no-one has won you can output 0 or false. My own (Ruby) solution will be up soon. Edit: Sorry, forgot to mark it as community wiki. You can assume the input is well formed and does not have to be error checked. Update: Please post your solution in the form of a function. Most people have done this already, but some haven't, which isn't entirely fair. The board is supplied to your function as the parameter. The result should be returned by the function. The function can have a name of your choosing.

    Read the article

  • What is the difference between AF_INET and PF_INET constants?

    - by Denilson Sá
    Looking at examples about socket programming, we can see that some people use AF_INET while others use PF_INET. In addition, sometimes both of them are used at the same example. The question is: Is there any difference between them? Which one should we use? If you can answer that, another question would be... Why there are these two similar (but equal) constants? What I've discovered, so far: The socket manpage In (Unix) socket programming, we have the socket() function that receives the following parameters: int socket(int domain, int type, int protocol); The manpage says: The domain argument specifies a communication domain; this selects the protocol family which will be used for communication. These families are defined in <sys/socket.h>. And the manpage cites AF_INET as well as some other AF_ constants for the domain parameter. Also, at the NOTES section of the same manpage, we can read: The manifest constants used under 4.x BSD for protocol families are PF_UNIX, PF_INET, etc., while AF_UNIX etc. are used for address families. However, already the BSD man page promises: "The protocol family generally is the same as the address family", and subsequent standards use AF_* everywhere. The C headers The sys/socket.h does not actually define those constants, but instead includes bits/socket.h. This file defines around 38 AF_ constants and 38 PF_ constants like this: #define PF_INET 2 /* IP protocol family. */ #define AF_INET PF_INET Python The Python socket module is very similar to the C API. However, there are many AF_ constants but only one PF_ constant (PF_PACKET). Thus, in Python we have no choice but use AF_INET. I think this decision to include only the AF_ constants follows one of the guiding principles: "There should be one-- and preferably only one --obvious way to do it." (The Zen of Python)

    Read the article

  • Wicket Authorization Using MetaDataKey

    - by JGirl
    I am trying to implement a simple authorization strategy for my Wicket application. I am implemented my own AuthorizationStrategy (extending IAuthorizationStrategy). http://old.nabble.com/Authorization-strategy-help-td18948597.html After reading the above link, I figured it makes more sense to use metadata-driven authorization than one using Annotations. So I have a simple RoleCheck class public class RoleCheck { private String privilege; public RoleCheck(String priv) { this.privilege = priv; } public void setPrivilege(String privilege) { this.privilege = privilege; } public String getPrivilege() { return privilege; } } I add it a component public static MetaDataKey priv = new MetaDataKey() {}; editLink.setMetaData(priv, new RoleCheck("Update")); And in my Authorization Strategy class, I try to get the metadata associated with the component public boolean isActionAuthorized(Component component, Action action) { if (action.equals(Component.RENDER)) { RoleCheck privCheck = (RoleCheck) component.getMetaData(EditControlToolBar.priv); if (privCheck != null) { ... } } However the getMetaData gives an error "Bound mismatch: The generic method getMetaData(MetaDataKey) of type Component is not applicable for the arguments (MetaDataKey). The inferred type RoleCheck is not a valid substitute for the bounded parameter " Any help would be appreciated. Thank you

    Read the article

  • Best way to change jqGrid rowNum from ALL to -1 before pass to a web service

    - by Billyhole
    I'm looking to find the best way to allow users to choose to show ALL records in a jqGrid. I know that a -1 value passed for the rows parameter denotes ALL, but I want the word "ALL" not a -1 to appear in the rowList select element, ie. rowList: [15, 50, 100, 'ALL']. I'm passing the grid request to a web service which accepts an int for "rows", and I'm trying find how and when I should change the user selected value of "ALL" to a -1 before it gets sent to the web service. Below is my cleaned up grid code. I tried some various code blocks before my $.ajax in the datatype function. But most attempts just seemed like I have to be doing this the most convoluted way I possibly could. For example, datatype: function(postdata) { if ($("#gridTableAssets").jqGrid('getGridParam', 'rowNum') == 'ALL') { $("#gridTableAssets").appendPostData({ "rows": -1, "page": 1 }); } $.ajax({... But doing that seemed to cause the actual "page" GridParam to be nulled out on subsequent grid actions, forcing me handle that in other places. There just seems like this is something that would be frequently done out there and have clean way of doing it. Cleaned grid code: $("#gridTableAssets").jqGrid({ datatype: function(postdata) { $.ajax({ url: "/Service/Repository.asmx/GetAssets", data: JSON.stringify(postdata), type: 'POST', contentType: "application/json; charset=utf-8", error: function(XMLHttpRequest, textStatus, errorThrown) { alert('error'); }, success: function(msg) { var assetsGrid = $("#gridTableAssets")[0]; assetsGrid.addJSONData(JSON.parse(msg)); ... } }); }, ... pager: $('#pagerAssets'), rowNum: 15, rowList: [15, 50, 100, 'ALL'], ... onPaging: function(index, colindex, sortorder) { SessionKeepAlive(); } }); And here is the web service [WebMethod] public string GetAssetsOfAssetStructure(bool _search, int rows, int page, string sidx, string sord, string filters)

    Read the article

  • UINavigationController placement problem

    - by Chonch
    Hey, I'm having this problem and I can't seem to figure out why! I want to use a UINavigationController, but I don't want to use it through out the entire application. So, in the UIViewController I was to add it to, I define: UINavigationController *navigationController; and the @property, @synthesize and dealloc. In the viewDidLoad method, I add: navigationController = [[UINavigationController alloc] init]; navigationController.navigationBar.barStyle = UIBarStyleBlack; and when the relevant UIViewController is loaded, I add: [navigationController pushViewController:viewController animated:NO]; and make the old view disappear and the UINavigationController's view to appear. Everything works fine except that the navigation bar appears about 20pixels too low (dragging the entire view down and out of the screen). If I set the UINavigationController's view frame parameter manually to start at 0,0, it jumps there, but only after about a second, so that you can see the navigation bar starting at a certain location and only then jumping to another (and it is ugly!). I have done the exact same thing in the past and had no problem with it. Does anyone know what may cause this? Thanks,

    Read the article

  • I have having following warning in gcc compilation in 32 bit architecture but not having any such wa

    - by thetna
    symbol.c: In function 'symbol_FPrint': symbol.c:1209: warning: format '%ld' expects type 'long int', but argument 3 has type 'SYMBOL' symbol.c: In function 'symbol_FPrintOtter': symbol.c:1236: warning: format '%ld' expects type 'long int', but argument 3 has type 'SYMBOL' symbol.c:1239: warning: format '%ld' expects type 'long int', but argument 3 has type 'SYMBOL' symbol.c:1243: warning: format '%ld' expects type 'long int', but argument 3 has type 'SYMBOL' symbol.c:1266: warning: format '%ld' expects type 'long int', but argument 3 has type 'SYMBOL' In symbol.c 1198 #ifdef CHECK 1199 else { 1200 misc_StartErrorReport(); 1201 misc_ErrorReport("\n In symbol_FPrint: Cannot print symbol.\n"); 1202 misc_FinishErrorReport(); 1203 } 1204 #endif 1205 } 1206 else if (symbol_SignatureExists()) 1207 fputs(symbol_Name(Symbol), File); 1208 else 1209 fprintf(File, "%ld", Symbol); 1210 } And SYMBOL is defined as: typedef size_t SYMBOL When i replaced '%ld' with '%zu' , i got the following warning: symbol.c: In function 'symbol_FPrint': symbol.c:1209: warning: ISO C90 does not support the 'z' printf length modifier Note: From here it has been edited on 26th of march 2010 and and following problem has beeen added because of its similarity to the above mentioned problem. I have following statement: printf("\n\t %4d:%4d:%4d:%4d:%4d:%s:%d", Index, S->info, S->weight, Precedence[Index],S->props,S->name, S->length); The warning I get while compiling in 64 bit architecture is : format ‘%4d’ expects type ‘int’, but argument 5 has type ‘size_t’ here are the definitions of parameter: NAT props; typedef unsigned int NAT; How can i get rid of this so that i can compile without warning in 32 and 64 bit architecture? What can be its solution?

    Read the article

  • Creating instance of a service-side DataContract class on client-side in WCF

    - by hgulyan
    Hi, I have my custom class Customer with its properties. I added DataContract mark above the class and DataMember to properties and it was working fine, but I'm calling a service class's function, passing customer instance as parameter and some of my properties get 0 values. While debugging I can see my properties values and after it gets to the function, some properties' values are 0. Why it can be so? There's no code between this two actions. DataContract mark workes fine, everything's ok. Any suggestions on this issue? I tried to change ByRef to ByVal, but it doesn't change anything. Why it would pass other values right and some of integer types just 0? Maybe the answer is simple, but I can't figure it out. Thank You. <DataContract()> Public Class Customer Private Type_of_clientField As Integer = -1 <DataMember(Order:=1)> Public Property type_of_client() As Integer Get Return Type_of_clientField End Get Set(ByVal value As Integer) Type_of_clientField = value End Set End Property End Class <ServiceContract(SessionMode:=SessionMode.Allowed)> <DataContractFormat()> Public Interface CustomerService <OperationContract()> Function addCustomer(ByRef customer As Customer) As Long End Interface type_of_client properties value is 6 before I call addCustomer function. After it enters that function the value is 0. UPDATE: The issue is in instance creating. When I create an instance of a class on client side, that is stored on service side, some of my properties pass 0 or nothing, but when I call a function of a service class, that returns a new instance of that class, it works fine. What's is the difference? Could that be serialization issue?

    Read the article

  • How do I escape a LIKE clause using NHibernate Criteria?

    - by Jon Seigel
    The code we're using is straight-forward in this part of the search query: myCriteria.Add( Expression.InsensitiveLike("Code", itemCode, MatchMode.Anywhere)); and this works fine in a production environment. The issue is that one of our clients has item codes that contain % symbols which this query needs to match. The resulting SQL output from this code is similar to: SELECT ... FROM ItemCodes WHERE ... AND Code LIKE '%ItemWith%Symbol%' which clearly explains why they're getting some odd results in item searches. Is there a way to enable escaping using the programmatic Criteria methods? Addendum: We're using a slightly old version of NHibernate, 2.1.0.4000 (current as of writing is 2.1.2.4853), but I checked the release notes, and there was no mention of a fix for this. I didn't find any open issue in their bugtracker either. We're using SQL Server, so I can escape the special characters (%, _, [, and ^) in code really easily, but the point of us using NHibernate was to make our application database-engine-independent as much as possible. Neither Restrictions.InsensitiveLike() nor HqlQueryUtil.GetLikeExpr() escape their inputs, and removing the MatchMode parameter makes no difference as far as escaping goes.

    Read the article

  • How to set up RPX widget and facebook app to be able to authenticate with rpx_now?

    - by Andrei
    Using the sample app for rpx_now gem ( http://github.com/grosser/rpx_now_example) on localhost:3000, I have successfully logged in via Google Accounts, myOpenID, Yahoo, but cannot make it via Facebook. In the RPX app/widget settings I have set my facebook-app key and secret. In my facebook app settings, the Connect URL is myappname.rpxnow.com. But when I try to connect, then I don't even see a facebook login page, just a number of redirects and I am back to my localhost with the following exception http://gist.github.com/386520 . Before I was successfully connecting with oauth2 gem, however, without fetching user data - only authentication. That time I set only key/secret and localhost as my Connect URL. Currently, I don't even ask for email etc., but still the same problem. Can it happen because rpx_now cannot get requested user data from facebook? Or it is a problem of facebook key/secret? May be I need to provide more settings of my facebook app? RPXNow::ApiError in UsersController#create Got error: Invalid parameter: token (code: 1), HTTP status: 200 RAILS_ROOT: /home/Andrei/rpx_now_example Application Trace | Framework Trace | Full Trace /usr/lib/ruby/gems/1.8/gems/rpx_now-0.6.20/lib/rpx_now/api.rb:71:in `parse_response' /usr/lib/ruby/gems/1.8/gems/rpx_now-0.6.20/lib/rpx_now/api.rb:21:in `call' /usr/lib/ruby/gems/1.8/gems/rpx_now-0.6.20/lib/rpx_now.rb:23:in `user_data' /home/Andrei/rpx_now_example/app/controllers/users_controller.rb:16:in `create' Request Parameters: None Show session dump Response Headers: {"Content-Type"="", "Cache-Control"="no-cache"}

    Read the article

  • accessing $_SESSION when using file_get_contents in PHP

    - by hairdresser-101
    I have a page called send.email.php which sends an email - pretty simple stuff - I pass an order id, it creates job request and sends it out. This works fine when used in the context I developed it (Use javascript to make an AJAX call to the URL and pass the order_id as a query parameter) I am now trying to reuse the exact same page in another application however I am calling it using php file_get_contents($base_url.'admin/send.email.php?order_id='.$order_id). When I call the page this way, the $_SESSION array is empty isempty() = 1. Is this because I am initiating a new session using file_get_contents and the values I stored in the $_SESSION on login are not available to me within there? -- Thanks for the feedback. It makes sense that the new call doesn't have access to the existing session... New problem though: I now get: failed to open stream: HTTP request failed! When trying to execute: $opts = array('http' => array('header'=> 'Cookie: ' . $_SERVER['HTTP_COOKIE']."\r\n")); $context = stream_context_create($opts); $contents = file_get_contents($base_url.'admin/send.sms.php?order_id='.order_id, false, $context); YET, the URL works fine if I call it as: (It just doesn't let me access session) $result file_get_contents($base_url.'admin/send.sms.php?order_id='.$order_id);

    Read the article

  • Unit Testing - Validation of ViewModel ASP.NET MVC 2

    - by dean nolan
    I am currently unit testing a service that adds users to a repository. I am using dependency injection to test using a fake repository. The repository has a method CreateUser(User user) which just adds it to the database or in this case a List of Users. The logic for the creation is in the UserServices class. The application has a form for creating a user that requires some properties such as name and address. This is an MVC 2 app and I will be using the new validation using data annotations. This makes me wonder about a few things: 1) Should I annotate a POCO object that will map to the database? Or should I create a specific View Model that has these annotations and pass this data to the UserServices class? 2)Should the UserServicesClass also check this data? Would I best be constructing a Usr out of the ViewModel and passing this into the Service as a parameter? 3) The actual unit testing would depend on 2), I either populate a User object and pass that in, or I pass a large list of strings to the method CreateUser. Writing this out I get a basic idea that I should probably annotate the view model only, pass in a user (constructed by the view model if the data is valid) and also just construct the user in the unit test also. Is this the best way to go?

    Read the article

  • Assert.AreEqual to not fail when comparing an enum and an int

    - by codingbear
    I'm not sure if this is doable, but I will just give a shot. I am calling Assert.AreEqual() method. For the parameters, I'm passing... an enum value which has Int32 as the underlying type because I didn't specify the base type an int (Int32) value Assert fails because it sees that the enum is not int (which is definitely correct). However, is there a way to make this Assert pass when the enum has the correct int value as the 2nd parameter? I can cast the enum to int and have it a quick fix, but it's really ugly. I was expecting some kind of overriding a method that Assert uses to compare 2 different objects and implicitly make that enum type look like an int. However, I wasn't successful at finding any hint/answer around that so far. Someone suggested to create a type converter and use the TypeConverterAttribute to get around. If this works for sure and is the only way to do it, I would; however, it does seem a lot of unnecessary work.

    Read the article

  • IIS 7.5 What am I doing wrong?

    - by chugh97
    In IIS 7.5 under Windows 7 Utilmate, I have an application which is configured for authentication as follows: Anonymous & Windows In the ASP.NET Website, I have turned Forms authentication and identity impersonate = true I also deny any anonymous users. <authentication mode="Forms"> </authentication> <identity impersonate="true"/> <authorization> <deny user="?"> </authorization> IIS complains. What am I doing wrong... What I want to achieve :I want the windows Logged On User so I can build a FormsAuthentication ticket and pass it to a Passive STS. So in IIS I have anonymous and windows...If have only windows ticked, I cannot go onto the Login.aspx page as I have an extra parameter to be passed from there. So now in webconfig, I then disable anonymous users by saying deny user="?" , so it leaves me with the authenticated windows user but using Forms Authentication.You know what I mean??

    Read the article

  • Sending a byte array from PHP to WCF problem

    - by shin
    Hi I have this problem: I have to send a byte array (encoded photo) from my PHP client to the WCF host. when I do a var_dump() on my array in PHP I get an array[2839] which is ok but on the server side when i debug I see that received array is only byte[5]...any idea how I can fix it? I used code like this $file = file_get_contents($_FILES['Filedata']['tmp_name']); $byteArr = str_split($file); foreach ($byteArr as $key=>$val) { $byteArr[$key] = ord($val); } $client = new SoapClient('http://localhost:8000/MgrService?wsdl', array( 'location' => 'http://localhost:8000/MgrService/SOAP11', 'trace' => true, 'soap_version' => SOAP_1_1 )); $par1->profileId = 13; $par1->photo = $byteArr; $client->TestByte($par1); And as I wrote erlier on the wcf host i get only byte[5] :/ maybe it needs some decoding to right soap serialize? should I use Base64 decoding or sommthing?? General I just want to upload posted file to c# function with byte[] as parameter :/ Help

    Read the article

  • How to consume webservices over https

    - by Kumar
    I am trying to consume a webservices which are located at https://TestServices/ServiceList.asmx. When I try to add a service reference to my C# library class project my app.config file looks like below: <system.serviceModel> <bindings> <basicHttpBinding> <binding name="TestServicesSoap" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="50000000" maxBufferPoolSize="524288" maxReceivedMessageSize="50000000" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm=""> </transport> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://TestServices/ServiceList.asmx" binding="basicHttpBinding" bindingConfiguration="TestServicesSoap" contract="TestServices.TestServicesSoap" name="TestServicesSoap" /> </client> </system.serviceModel> Even when I tried to add a service reference to the https://TestServices/ServiceList.asmx for some reason end point address is still pointing to http://TestServices/ServiceList.asmx. I tried changing the http to https but I am getting the below error: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via What is the right way of consuming the webservices on https?

    Read the article

  • Full Text Search MSSQL2008 show wrong display_item for Thai Language

    - by ensecoz
    I am working on MSSQL2008. My task is to investigate the issue that why FTS cannot find the right result for Thai. First, I am having the table which enable the FTS on the column 'ItemName' which is nvarchar. The Catalog is created with the Thai Language. Note that, Thai language is one of the language that doesn't separate the word by space so '????' '???' '????' are written like this in the sentence '???????????' In the table, there are many rows that include the word (????) for examples row#1 (ItemName: '???????????') On the webpage, I try to search for '????' but SQLServer cannot find it. So I try to investigate it by trying the following query in SQLServer select * from sys.dm_fts_parser(N'"???????????"', 1054, 0, 0) To see how the words are broken. The first one is the text to be break. The second parameter is specify that using Thai (WorkBreaker, so on). and here is the result: row#1 (display_item: '????', source_item: '???????????') row#2 (display_item: '????', source_item: '???????????') row#3 (display_item: '??', source_item: '???????????') Notice that the first and second row display the worng display_item '?' in the '????' isn't even Thai characters. '?' in '????' is not Thai charater either. So the question is where is those alien characters come from? I guess this i why I cannot search for '????' because the word breaker is mis-borken and keeping the wrong character in the indexes. Please help!

    Read the article

  • How can I get WWW-Mechanize to login to Wells Fargo's website?

    - by J Miller
    I am trying to use Perl's WWW::Mechanize to login to my bank and pull transaction information. After logging in through a browser to my bank (Wells Fargo), it briefly displays a temporary web page saying something along the lines of "please wait while we verify your identity". After a few seconds it proceeds to the bank's webpage where I can get my bank data. The only difference is that the URL contains several more "GET" parameters appended to the URL of the temporary page, which only had a sessionID parameter. I was able to successfully get WWW::Mechanize to login from the login page, but it gets stuck on the temporary page. There is a <meta http-equiv="Refresh"... tag in the header, so I tried $mech->follow_meta_redirect but it didn't get me past that temporary page either. Any help to get past this would be appreciated. Thanks in advance. Here is the barebones code that gets me stuck at the temporary page: #!/usr/bin/perl -w use strict; use WWW::Mechanize; my $mech = WWW::Mechanize->new(); $mech->agent_alias( 'Linux Mozilla' ); $mech->get( "https://www.wellsfargo.com" ); $mech->submit_form( form_number => 2, fields => { userid => "$userid", password => "$password" }, button => "btnSignon" );

    Read the article

  • Silverlight, WCF service, integrated security AND ssl/https not possible?

    - by Flores
    I have this setup that works perfectly when using http. A silverlight 3 client .net 4 WCF service hosted in IIS with basicHttpBinding and using integrated security on the site When setting https to required on the website the setup stops working. Using the wcftestclient on the uri I get the message: The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. The remote server returned an error: (401) Unauthorized. Maybe this makes sense because the wcftestclient does not pass credentials? in the web.config the security mode for the service binding is set is set to 'Transport'. The silverlight client is created like this: BasicHttpBinding basicHttpBinding = new BasicHttpBinding(); basicHttpBinding.Security.Mode = BasicHttpSecurityMode.Transport; var serviceClient = new ImportServiceClient(basicHttpBinding, serviceAddress); The service address is ofcourse starting with https:// And the silverlight client reports this error: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via Remember, swithing it back to http (and setting security mode to 'TransportCredentialOnly' makes everything working again. Is the setup I want even supported? If so, how should it be configured?

    Read the article

  • Record/Playback with AudioQueue on iPhone

    - by Biranchi
    Hi, I am currently using Audio Queues on the iPhone to record and playback audio. What I would like to be able to do is to record some audio, allow the user to pause the record queue, and to seek back and forward through the audio to select a position from where they can start recording from again. I have got over the seeking issue by making the playback AudioQueueBuffer sizes small enough so that the play audio queue callback happens at a rate that allows the user to use a slider control to hear the audio as they adjust the slider back and forth. I think I can achieve the recording at a new position by setting the inStartingPacket parameter of the AudioFileWritePackets function that I call from the Audio Recording Queue callback. The trouble is this only inserts audio over the previously recorded audio. The file length obviously doesn't change so if the user were to go backwards and record less audio than before, the old audio still remains after the end of the newly recorded audio. Is there a way I can get the AudioFile to truncate at the point the user starts to insert the new audio, is there some other way I can remove the old audio starting at the insert position or is there a better way about going about this task? Thanks

    Read the article

  • Compile error on inheritance of generic inner class extending with bounds

    - by Arne Burmeister
    I have a problem when compiling a generic class with an inner class. The class extends a generic class, the inner class also. Here the interface implemented: public interface IndexIterator<Element> extends Iterator<Element> { ... } The generic super class: public abstract class CompoundCollection<Element, Part extends Collection<Element>> implements Collection<Element> { ... protected class CompoundIterator<Iter extends Iterator<Element>> extends ImmutableIterator<Element> { ... } } The generic subclass with the compiler error: public class CompoundList<Element> extends CompoundCollection<Element, List<Element>> implements List<Element> { ... private class CompoundIndexIterator extends CompoundIterator<IndexIterator<Element>> implements IndexIterator<Element> { ... } } The error is: type parameter diergo.collect.IndexIterator<Element> is not within its bound extends CompoundIterator<IndexIterator<Element>> ^ What is wrong? The code compiles with eclipse, but bot with java 5 compiler (I use ant with java 5 on a mac and eclipse 3.5). No, I cannot convert it to a static inner class.

    Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >