Search Results

Search found 47324 results on 1893 pages for 'end users'.

Page 236/1893 | < Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >

  • What DX level does my graphics card support? Does it go to 11?

    - by Daniel Moth
    Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Sunshine after the iCloud release?

    - by Laila
    "Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators.  It is wonderful what a rename can do.  Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and  iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere.  I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe.  It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as  June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly  a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn.  On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

    Read the article

  • Hell and Diplomacy: Notes on Software Integration

    - by ericajanine
    Well, I'm getting cabin fever and short-timer's ADD all at the same time. I haven't been anywhere outside of my greater city area in FOREVER and I'm only days away from my vacation. I have brainlock because the last few days have been non-stop diffusing amazingly hostile conversations. I think I'll write about that. So then, I "do" software. At the end of the day, software is pretty straightforward. Software is that thing we love and try to make do things not currently in play, in existence. If a process around getting software to do something is broken (like most actually are), then we should acknowledge it and move on. We are professional. We are helpful beyond the normal call of duty. We live and breathe making the lives better for those apps being active in the world. But above all--the shocker: We are SERVICE. In a service frame of mind, all perspectives shift to what is best overall for system stabilization vs. what must be in production to meet business objectives. It doesn't matter how much you like or dislike the creator of said software. It doesn't matter what time you went to bed last night or if your mate appreciates your Death March attitude. Getting a product in and when is an age-old dilemma in a software environment where more than, say, 3 people are involved. We know this. Taking a servant's perspective eliminates the drama surrounding what a group of half-baked developers forgot to tell each other in the 11th hour about their trampling changes before check-in. We, my counterparts in society, get paid to deal with that drama. I get paid to diffuse that drama and make everything integrate as smoothly as possible. At the end of the day, attacking someone over a minor detail not only makes things worse, it's against the whole point of our real existence. Being in support or software integration means you are to keep your eyes on the end game. That end game? It's making a solution work for all stakeholders, not just you or your immediate superior. Development and technology groups exist because business groups need them to exist and solve their issues. The end game? Doing what is best for those business groups ultimately. Period. Note: That does not mean you let your business users solely dictate when and if something gets changed in an environment you ultimately own. That's just crazy. Software and its environments are legitimately owned by those who manage it directly, no matter how important a business group believes it is to the existence of mankind. So, you both negotiate the terms of changing that environment and only do so upon that negotiation. Diplomacy is in order. So, to finish my thoughts: If you have no ability to keep your mouth shut in a situation where a business or development group truly need your help to make something work even beyond a deadline, find another profession. Beating up someone verbally because they screw up means a service attitude is not at the forefront of your motivation for doing what is ultimately their work and their product. Software, especially integration, requires a strong will and a soft touch to keep it on track. Not a hammer covered in broken glass.

    Read the article

  • NHibernate and Stored Procedures in C#

    - by Jess Nickson
    I was recently trying and failing to set up NHibernate (v1.2) in an ASP.NET project. The aim was to execute a stored procedure and return the results, but it took several iterations for me to end up with a working solution. In this post I am simply trying to put the required code in one place, in the hope that the snippets may be useful in guiding someone else through the same process. As it is kind’ve the first time I have had to play with NHibernate, there is a good chance that this solution is sub-optimal and, as such, I am open to suggestions on how it could be improved! There are four code snippets that I required: The stored procedure that I wanted to execute The C# class representation of the results of the procedure The XML mapping file that allows NHibernate to map from C# to the procedure and back again The C# code used to run the stored procedure The Stored Procedure The procedure was designed to take a UserId and, from this, go and grab some profile data for that user. Simple, right? We just need to do a join first, because the user’s site ID (the one we have access to) is not the same as the user’s forum ID. CREATE PROCEDURE [dbo].[GetForumProfileDetails] ( @userId INT ) AS BEGIN SELECT Users.UserID, forumUsers.Twitter, forumUsers.Facebook, forumUsers.GooglePlus, forumUsers.LinkedIn, forumUsers.PublicEmailAddress FROM Users INNER JOIN Forum_Users forumUsers ON forumUsers.UserSiteID = Users.UserID WHERE Users.UserID = @userId END I’d like to make a shout out to Format SQL for its help with, well, formatting the above SQL!   The C# Class This is just the class representation of the results we expect to get from the stored procedure. NHibernate requires a virtual property for each column of data, and these properties must be called the same as the column headers. You will also need to ensure that there is a public or protected parameterless constructor. public class ForumProfile : IForumProfile { public virtual int UserID { get; set; } public virtual string Twitter { get; set; } public virtual string Facebook { get; set; } public virtual string GooglePlus { get; set; } public virtual string LinkedIn { get; set; } public virtual string PublicEmailAddress { get; set; } public ForumProfile() { } }   The NHibernate Mapping File This is the XML I wrote in order to make NHibernate a) aware of the stored procedure, and b) aware of the expected results of the procedure. <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="[namespace]" assembly="[assembly]"> <sql-query name="GetForumProfileDetails"> <return-scalar column="UserID" type="Int32"/> <return-scalar column="Twitter" type="String"/> <return-scalar column="Facebook" type="String"/> <return-scalar column="GooglePlus" type="String"/> <return-scalar column="LinkedIn" type="String"/> <return-scalar column="PublicEmailAddress" type="String"/> exec GetForumProfileDetails :UserID </sql-query> </hibernate-mapping>   Calling the Stored Procedure Finally, to bring it all together, the C# code that I used in order to execute the stored procedure! public IForumProfile GetForumUserProfile(IUser user) { return NHibernateHelper .GetCurrentSession() .GetNamedQuery("GetForumProfileDetails") .SetInt32("UserID", user.UserID) .SetResultTransformer( Transformers.AliasToBean(typeof (ForumProfile))) .UniqueResult<ForumProfile>(); } There are a number of ‘Set’ methods (i.e. SetInt32) that allow you specify values for any parameters in the procedure. The AliasToBean method is then required to map the returned scalars (as specified in the XML) to the correct C# class.

    Read the article

  • Apps UX Launches Blueprints for Mobile User Experiences

    - by mvaughan
    By Misha Vaughan, Oracle Applications User ExperienceAt Oracle OpenWorld 2012 this year, the Oracle Applications User Experience (Apps UX) team announced the release of Mobile User Experience Functional Design Patterns. These patterns are designed to work directly with Oracle’s Fusion Middleware, specifically, ADF Mobile.  The Oracle Application Development Framework for mobile users enables developers to build one application that can be deployed to multiple mobile device platforms. These same mobile design patterns provide the guidance for Oracle teams to develop Fusion Mobile expenses. Application developers can use Oracle’s mobile design patterns to design iPhone, Android, or browser-based smartphone applications. We are sharing our mobile design patterns and their baked-in, scientifically proven usability to enable Oracle customers and partners to build mobile applications quickly.A different way of thinking and designing. Lynn Rampoldi-Hnilo, Senior Manager of Mobile User Experiences for Apps UX, says mobile design has to be compelling. “It needs to be optimized for the device, and be visually rich and simple,” she said. “What is really key is that you are designing for a user’s most personal device, the device that they will have with them at all times of the day.”Katy Massucco, director of the overall design patterns site, said: “You need to start with a simplified task flow. Everything should be a natural interaction. The action should be relevant and leveraging the device. It should be seamless.”She suggests that developers identify the essential tasks that a user would want to do while mobile. “They need to understand the user and the context,” she added. ?A sample inline action design patternWhat people are sayingReactions to the release of the design patterns have been positive. Debra Lilley, Oracle ACE Director and Fusion User Experience Advocate (FXA), has already demo’ed Fusion Mobile Expenses widely.  Fellow Oracle Ace Director Ronald van Luttikhuizen, called it a “cool demo by @debralilley of the new mobile expenses app.” FXA member Floyd Teter says he is already cooking up some plans for using mobile design patterns.  We hope to see those ideas at Collaborate or ODTUG in 2013. For another perspective on why user experience is such an important focus for mobile applications, check out this video by John King, Director, and Monty Latiolais, President, both from ODTUG, or the Oracle Development Tools User Group.In a separate interview by e-mail, Latiolais wrote: “I enjoy the fact we can take something that, in the past, has been largely subjective, and now apply to it a scientifically proven look and feel. Trusting Oracle’s UX Design Patterns, the presentation really can become one less thing to worry about. As someone with limited ADF experience, that is extremely beneficial.”?King, who was also interviewed by e-mail, wrote: “User Experience is about making the task at hand as easy and error-free as possible. Oracle's UX labs worked hard to make the User Experience in the new Fusion Applications as good as possible; ADF makes adding tested, consistent, user experiences a declarative exercise by leveraging that work. As we move applications onto mobile platforms, user experience is the driving factor. Customers are "spoiled" by a bevy of fantastic applications, and ours cannot disappoint them. Creating applications that enable users to quickly and effectively accomplish whatever task is at hand takes thought and practice. Developers must become ’power users’ and then create applications that they and their users will love.”

    Read the article

  • Free hosting solution for a very low-traffic website [duplicate]

    - by user966939
    This question already has an answer here: How to find web hosting that meets my requirements? 4 answers I run a very low-traffic website (about 40 users, basically all of which are daily active on the site). I don't see it changing anytime soon either, as there is no way to sign up on the site right now. Until now I have just been using a sub-directory on a friend's host (shared), to host the web site. But in only a few weeks from now, his subscription will end, and he has no plans on renewing it. So of course this means I'll have to move on to something else. But I don't think I'll find someone who'd be willing to share a... shared host with me again. And besides, the software used on that server is ancient (PHP 4.4.9 + MySQL 4.1.22). There's one obvious solution that comes to mind, I guess: choose a better host and pay for it myself. The problem here is that I have no real fixed income, as I'm only a student. So even if the pricing is dirt cheap, I just can't be certain I will be able to afford it, every single month, for... at least 2 years maybe? So I've looked at free hosting solutions instead. The least requirement I had was that it was completely free of ads. But no matter where I look, I always find something in a corner or two ("what can you expect from a free host?" - yeah I know, but I guess it was worth a shot). For example, on Byethost (one of the free hosts I tried), if you trigger a PHP error while error reporting is set to E_ALL, you will spawn some hidden ad... Besides Byethost, I've tried 000Webhost, x10Hosting, 2Freehosting/1Freehosting, Wink.ws, and they are only worse. Okay, I'm running low on ideas. But! What if I just hosted the site myself, on my own computer? That could work. I actually do have my computer on practically 24/7. But not really. Sometimes I need to reboot it, and sometimes we even have power outages. And what if the hardware needs an upgrade? It's not such a big deal for me if the site went down, because I know what's going on; but what about the users? If I do decide to host it myself, is there some way to show users an alternate page instead of them just seeing a generic "server not found" page in the browser when the site is not accessible? Or is there something I have been missing out on? Is there a different kind of "web hosting" solution out there that I haven't heard of? Here is what I'm really looking for: Free (as in, no costs) NO ads Bandwidth enough for a low-traffic forum with roughly 40 users (Semi-)Up-to-date PHP and MySQL (at least not older than a year) No standard (non-extension) PHP functions turned off - such as sleep() The mbstring extension is enabled Disk space: at least 5 MB At least one MySQL database Some bonus points would be: Max execution time of PHP scripts can be set Remote access to MySQL database What would be the best solution for me? Is there one?

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

  • Inside Red Gate - Exercising Externally

    - by simonc
    Over the next few weeks, we'll be performing experiments on SmartAssembly to confirm or refute various hypotheses we have about how people use the product, what is stopping them from using it to its full extent, and what we can change to make it more useful and easier to use. Some of these experiments can be done within the team, some within Red Gate, and some need to be done on external users. External testing Some external testing can be done by standard usability tests and surveys, however, there are some hypotheses that can only be tested by building a version of SmartAssembly with some things in the UI or implementation changed. We'll then be able to look at how the experimental build is used compared to the 'mainline' build, which forms our baseline or control group, and use this data to confirm or refute the relevant hypotheses. However, there are several issues we need to consider before running experiments using separate builds: Ideally, the user wouldn't know they're running an experimental SmartAssembly. We don't want users to use the experimental build like it's an experimental build, we want them to use it like it's the real mainline build. Only then will we get valid, useful, and informative data concerning our hypotheses. There's no point running the experiments if we can't find out what happens after the download. To confirm or refute some of our hypotheses, we need to find out how the tool is used once it is installed. Fortunately, we've applied feature usage reporting to the SmartAssembly codebase itself to provide us with that information. Of course, this then makes the experimental data conditional on the user agreeing to send that data back to us in the first place. Unfortunately, even though this does limit the amount of useful data we'll be getting back, and possibly skew the data, there's not much we can do about this; we don't collect feature usage data without the user's consent. Looks like we'll simply have to live with this. What if the user tries to buy the experiment? This is something that isn't really covered by the Lean Startup book; how do you support users who give you money for an experiment? If the experiment is a new feature, and the user buys a license for SmartAssembly based on that feature, then what do we do if we later decide to pivot & scrap that feature? We've either got to spend time and money bringing that feature up to production quality and into the mainline anyway, or we've got disgruntled customers. Either way is bad. Again, there's not really any good solution to this. Similarly, what if we've removed some features for an experiment and a potential new user downloads the experimental build? (As I said above, there's no indication the build is an experimental build, as we want to see what users really do with it). The crucial feature they need is missing, causing a bad trial experience, a lost potential customer, and a lost chance to help the customer with their problem. Again, this is something not really covered by the Lean Startup book, and something that doesn't have a good solution. So, some tricky issues there, not all of them with nice easy answers. Turns out the practicalities of running Lean Startup experiments are more complicated than they first seem! Cross posted from Simple Talk.

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

  • Using Content Analytics for More Effective Engagement

    - by Kellsey Ruppel
    Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

    Read the article

  • Access Control Lists for Roles

    - by Kyle Hatlestad
    Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

    Read the article

  • Application Logging needs work

    Application Logging Application logging is the act of logging events that occur within an application much like how a court report documents what happens in court case. Application logs can be useful for several reasons, but the most common use for logs is to recreate steps to find the root cause of applications errors. Other uses can include the detection of Fraud, verification of user activity, or provide audits on user/data interactions. “Logs can contain different kinds of data. The selection of the data used is normally affected by the motivation leading to the logging. “ (OWASP, 2009) OWASP also stats that logging include applicable debugging information like the event date time, responsible process, and a description of the event. “There are many reasons why a logging system is a necessary part of delivering a distributed application. One of the most important is the ability to track exactly how many users are using the application during different time periods.” (Hatton, 2000) Hatton also states that application logging helps system designers determine whether parts of an application aren't being used as designed. He implies that low usage can be used to identify if users like or do not like aspects of a system based on user usage of the application. This enables application designers to extract why users don't like aspects of an application so that changes can be made to increase its usefulness and effectiveness. “Logging memory usage can also assist you in tuning up the internals of your application. If you're experiencing a randomly occurring problem, being able to match activities performed with the memory status at the time may enable you to discover the cause of the problem. It also gives you a good indication of the health of the distributed server machine at the time any activity is performed. “ (Hatton, 2000) Commonly Logged Application Events (Defined by OWASP) Access of Data Creation of Data Modification of Data in any form Administrative Functions  Configuration Changes Debugging Information(Application Events)  Authorization Attempts  Data Deletion Network Communication  Authentication Events  Errors/Exceptions Application Error Logging The functionality associated with application error logging is actually the combination of proper error handling and applications logging.  If we look back at Figure 4 and Figure 5, these code examples allow developers to handle various types of errors that occur within the life cycle of an application’s execution. Application logging can be applied within the Catch section of the TryCatch statement allowing for the errors to be logged when they occur. By placing the logging within the Catch section specific error details can be accessed that help identify the source of the error, the path to the error, what caused the error and definition of the error that occurred. This can then be logged and reviewed at a later date in order recreate the error that was received based data found in the application log. By allowing applications to log errors developers IT staff can use them to recreate errors that are encountered by end-users or other dependent systems.

    Read the article

  • Is this over-abstraction? (And is there a name for it?)

    - by mwhite
    I work on a large Django application that uses CouchDB as a database and couchdbkit for mapping CouchDB documents to objects in Python, similar to Django's default ORM. It has dozens of model classes and a hundred or two CouchDB views. The application allows users to register a "domain", which gives them a unique URL containing the domain name that gives them access to a project whose data has no overlap with the data of other domains. Each document that is part of a domain has its domain property set to that domain's name. As far as relationships between the documents go, all domains are effectively mutually exclusive subsets of the data, except for a few edge cases (some users can be members of more than one domain, and there are some administrative reports that include all domains, etc.). The code is full of explicit references to the domain name, and I'm wondering if it would be worth the added complexity to abstract this out. I'd also like to know if there's a name for the sort of bound property approach I'm taking here. Basically, I have something like this in mind: Before in models.py class User(Document): domain = StringProperty() class Group(Document): domain = StringProperty() name = StringProperty() user_ids = StringListProperty() # method that returns related document set def users(self): return [User.get(id) for id in self.user_ids] # method that queries a couch view optimized for a specific lookup @classmethod def by_name(cls, domain, name): # the view method is provided by couchdbkit and handles # wrapping json CouchDB results as Python objects, and # can take various parameters modifying behavior return cls.view('groups/by_name', key=[domain, name]) # method that creates a related document def get_new_user(self): user = User(domain=self.domain) user.save() self.user_ids.append(user._id) return user in views.py: from models import User, Group # there are tons of views like this, (request, domain, ...) def create_new_user_in_group(request, domain, group_name): group = Group.by_name(domain, group_name)[0] user = User(domain=domain) user.save() group.user_ids.append(user._id) group.save() in group/by_name/map.js: function (doc) { if (doc.doc_type == "Group") { emit([doc.domain, doc.name], null); } } After models.py class DomainDocument(Document): domain = StringProperty() @classmethod def domain_view(cls, *args, **kwargs): kwargs['key'] = [cls.domain.default] + kwargs['key'] return super(DomainDocument, cls).view(*args, **kwargs) @classmethod def get(cls, *args, **kwargs, validate_domain=True): ret = super(DomainDocument, cls).get(*args, **kwargs) if validate_domain and ret.domain != cls.domain.default: raise Exception() return ret def models(self): # a mapping of all models in the application. accessing one returns the equivalent of class BoundUser(User): domain = StringProperty(default=self.domain) class User(DomainDocument): pass class Group(DomainDocument): name = StringProperty() user_ids = StringListProperty() def users(self): return [self.models.User.get(id) for id in self.user_ids] @classmethod def by_name(cls, name): return cls.domain_view('groups/by_name', key=[name]) def get_new_user(self): user = self.models.User() user.save() views.py @domain_view # decorator that sets request.models to the same sort of object that is returned by DomainDocument.models and removes the domain argument from the URL router def create_new_user_in_group(request, group_name): group = request.models.Group.by_name(group_name) user = request.models.User() user.save() group.user_ids.append(user._id) group.save() (Might be better to leave the abstraction leaky here in order to avoid having to deal with a couchapp-style //! include of a wrapper for emit that prepends doc.domain to the key or some other similar solution.) function (doc) { if (doc.doc_type == "Group") { emit([doc.name], null); } } Pros and Cons So what are the pros and cons of this? Pros: DRYer prevents you from creating related documents but forgetting to set the domain. prevents you from accidentally writing a django view - couch view execution path that leads to a security breach doesn't prevent you from accessing underlying self.domain and normal Document.view() method potentially gets rid of the need for a lot of sanity checks verifying whether two documents whose domains we expect to be equal are. Cons: adds some complexity hides what's really happening requires no model modules to have classes with the same name, or you would need to add sub-attributes to self.models for modules. However, requiring project-wide unique class names for models should actually be fine because they correspond to the doc_type property couchdbkit uses to decide which class to instantiate them as, which should be unique. removes explicit dependency documentation (from group.models import Group)

    Read the article

  • Is hidden content (display: none;) -indexed- by search engines? [closed]

    - by user568458
    Possible Duplicate: How bad is it to use display: none in CSS? We've established on this site before (in this question) that, since there are so many legitimate uses for hiding content with display: none; when creating interactive features, that sites aren't automatically penalised for content that is hidden this way (so long as it doesn't look algorithmically spammy). Google's Webmaster guidelines also make clear that a good practice when using content that is initially legitimately hidden for interactivity purposes is to also include the same content in a <noscript> tag, and Google recommend that if you design and code for users including users with screen readers or javascript disabled, then 9 times out of 10 good relevant search rankings will follow (though their specific advice seems more written for cases where javascript writes new content to the page). JavaScript: Place the same content from the JavaScript in a tag. If you use this method, ensure the contents are exactly the same as what’s contained in the JavaScript, and that this content is shown to visitors who do not have JavaScript enabled in their browser. So, best practice seems pretty clear. What I can't find out is, however, the simple factual matter of whether hidden content is indexed by search engines (but with potential penalties if it looks 'spammy'), or, whether it is ignored, or, whether it is indexed but with a lower weighting (like <noscript> content is, apparently). (for bonus points it would be great to know if this varies or is consistent between display: none;, visibility: hidden;, etc, but that isn't crucial). This is different to the other questions on display:none; and SEO - those are about good and bad practice and the answers are discussions of good and bad practice, I'm interested simply in the factual 'Yes or no' question of whether search engines index, or ignore, content that is in display: none; - something those other questions' answers aren't totally clear on. One other question has an answer, "Yes", supported by a link to an article that doesn't really clear things up: it establishes that search engines can spot that text is hidden, it discusses (again) whether hidden text causes sites to be marked as spam, and ultimately concludes that in mid 2011, Google's policy on hidden text was evolving, and that they hadn't at that time started automatically penalising display:none; or marking it as spam. It's clear that display: none; isn't always spam and isn't always treated as spam (many Google sites use it...): but this doesn't clear up how, or if, it is indexed. What I will do will be to follow the guidelines and make sure that all the content that is initially hidden which regular users can explore using javascript-driven interactivity is also structured in way that noscript/screenreader users can use. So I'm not interested in best practice, opinions etc because best practice seems to be really clear: accessibility best practices boosts SEO. But I'd like to know what exactly will happen: whether any display: none; content I have alongside <noscript> or otherwise accessibility-optimised content will be be ignored, or indexed again, or picked up to compare against the <noscript> content but not indexed... etc.

    Read the article

  • android sdk main.out.xml parsing error?

    - by mobibob
    I just started a new Android project, "WeekendStudy" to continue learning Android development and I got stumped compiling the default 'hello weekendstudy' compile / run. I think that I missed a step in configuration and setup, but I am at a loss to find out where. I have an AVD configured, set and launched. When I press 'run', the SDK is building a file main.out.xml and then fails as this: [2010-03-06 09:46:47 - WeekendStudy]Error in an XML file: aborting build. [2010-03-06 09:46:48 - WeekendStudy]res/layout/main.xml:0: error: Resource entry main is already defined. [2010-03-06 09:46:48 - WeekendStudy]res/layout/main.out.xml:0: Originally defined here. [2010-03-06 09:46:48 - WeekendStudy]/Users/mobibob/Projects/workspace-weekend/WeekendStudy/res/layout/main.out.xml:1: error: Error parsing XML: no element found [2010-03-06 09:48:16 - WeekendStudy]Error in an XML file: aborting build. [2010-03-06 09:48:16 - WeekendStudy]res/layout/main.xml:0: error: Resource entry main is already defined. [2010-03-06 09:48:16 - WeekendStudy]res/layout/main.out.xml:0: Originally defined here. [2010-03-06 09:48:16 - WeekendStudy]/Users/mobibob/Projects/workspace-weekend/WeekendStudy/res/layout/main.out.xml:1: error: Error parsing XML: no element found [2010-03-06 09:55:29 - WeekendStudy]res/layout/main.xml:0: error: Resource entry main is already defined. [2010-03-06 09:55:29 - WeekendStudy]res/layout/main.out.xml:0: Originally defined here. [2010-03-06 09:55:29 - WeekendStudy]/Users/mobibob/Projects/workspace-weekend/WeekendStudy/res/layout/main.out.xml:1: error: Error parsing XML: no element found [2010-03-06 09:55:49 - WeekendStudy]Error in an XML file: aborting build. [2010-03-06 09:55:49 - WeekendStudy]res/layout/main.xml:0: error: Resource entry main is already defined. [2010-03-06 09:55:49 - WeekendStudy]res/layout/main.out.xml:0: Originally defined here. [2010-03-06 09:55:49 - WeekendStudy]/Users/mobibob/Projects/workspace-weekend/WeekendStudy/res/layout/main.out.xml:1: error: Error parsing XML: no element found

    Read the article

  • Entity Framework - adding new items via a navigation property

    - by Robert
    I have come across what appears to be very peculiar behaviour using entity framework 4.0. I have a User entity, which has a Company (A Company has many Users). If I do this, everything works as expected and I get a nice shiny new user in the database: var company = _model.Companies.First(); company.Users.Add(new User(1, "John", "Smith")); _model.SaveChanges(); However, if I do this, then I get nothing new in the database, and no exceptions thrown: var existingUser = _model.Users.First(); var company = existingUser.Company; company.Users.Add(new User(1, "John", "Smith")); _model.SaveChanges(); So it appears that if I add a User to the Company that is pulled directly from the model, then everything works fine. However if the User is added to a Company that is pulled as a navigation property of another object, then it doesn't work. Can someone tell me if this is expected behaviour, or if there is something I can do to make it so that it is? Thanks!

    Read the article

  • WebSocket handshake with Ruby and EM::WebSocket::Server

    - by Chad Johnson
    I am trying to create a simple WebSocket connection in JavaScript against my Rails app. I get the following: WebSocket connection to 'ws://localhost:4000/' failed: Error during WebSocket handshake: 'Sec-WebSocket-Accept' header is missing What am I doing wrong? Here is my code: JavaScript: var socket = new WebSocket('ws://localhost:4000'); socket.onopen = function() { var handshake = "GET / HTTP/1.1\n" + "Host: localhost\n" + "Upgrade: websocket\n" + "Connection: Upgrade\n" + "Sec-WebSocket-Key: x3JJHMbDL1EzLkh9GBhXDw==\n" + "Sec-WebSocket-Protocol: quote\n" + "Sec-WebSocket-Version: 13\n" + "Origin: http://localhost\n"; socket.send(handshake); }; socket.onmessage = function(data) { console.log(data); }; Ruby: require 'rubygems' require 'em-websocket-server' module QuoteService class WebSocket < EventMachine::WebSocket::Server def on_connect handshake_response = "HTTP/1.1 101 Switching Protocols\n" handshake_response << "Upgrade: websocket\n" handshake_response << "Connection: Upgrade\n" handshake_response << "Sec-WebSocket-Accept: HSmrc0sMlYUkAGmm5OPpG2HaGWk=\n" handshake_response << "Sec-WebSocket-Protocol: quote\n" send_message(handshake_response) end def on_receive(data) puts 'RECEIVED: ' + data end end end EventMachine.run do print 'Starting WebSocket server...' EventMachine.start_server '0.0.0.0', 4000, QuoteService::WebSocket puts 'running' end The handshake headers are per Wikipedia.

    Read the article

  • how to change UITabbar selected color?

    - by RAGOpoR
    according to this post for now, Is apple will also reject this code? and how to implement what apple will approve? @interface UITabBar (ColorExtensions) - (void)recolorItemsWithColor:(UIColor *)color shadowColor:(UIColor *)shadowColor shadowOffset:(CGSize)shadowOffset shadowBlur:(CGFloat)shadowBlur; @end @interface UITabBarItem (Private) @property(retain, nonatomic) UIImage *selectedImage; - (void)_updateView; @end @implementation UITabBar (ColorExtensions) - (void)recolorItemsWithColor:(UIColor *)color shadowColor:(UIColor *)shadowColor shadowOffset:(CGSize)shadowOffset shadowBlur:(CGFloat)shadowBlur { CGColorRef cgColor = [color CGColor]; CGColorRef cgShadowColor = [shadowColor CGColor]; for (UITabBarItem *item in [self items]) if ([item respondsToSelector:@selector(selectedImage)] && [item respondsToSelector:@selector(setSelectedImage:)] && [item respondsToSelector:@selector(_updateView)]) { CGRect contextRect; contextRect.origin.x = 0.0f; contextRect.origin.y = 0.0f; contextRect.size = [[item selectedImage] size]; // Retrieve source image and begin image context UIImage *itemImage = [item image]; CGSize itemImageSize = [itemImage size]; CGPoint itemImagePosition; itemImagePosition.x = ceilf((contextRect.size.width - itemImageSize.width) / 2); itemImagePosition.y = ceilf((contextRect.size.height - itemImageSize.height) / 2); UIGraphicsBeginImageContext(contextRect.size); CGContextRef c = UIGraphicsGetCurrentContext(); // Setup shadow CGContextSetShadowWithColor(c, shadowOffset, shadowBlur, cgShadowColor); // Setup transparency layer and clip to mask CGContextBeginTransparencyLayer(c, NULL); CGContextScaleCTM(c, 1.0, -1.0); CGContextClipToMask(c, CGRectMake(itemImagePosition.x, -itemImagePosition.y, itemImageSize.width, -itemImageSize.height), [itemImage CGImage]); // Fill and end the transparency layer CGContextSetFillColorWithColor(c, cgColor); contextRect.size.height = -contextRect.size.height; CGContextFillRect(c, contextRect); CGContextEndTransparencyLayer(c); // Set selected image and end context [item setSelectedImage:UIGraphicsGetImageFromCurrentImageContext()]; UIGraphicsEndImageContext(); // Update the view [item _updateView]; } } @end

    Read the article

  • Why am I getting a " instance has no attribute '__getitem__' " error?

    - by Kevin Yusko
    Here's the code: class BinaryTree: def __init__(self,rootObj): self.key = rootObj self.left = None self.right = None root = [self.key, self.left, self.right] def getRootVal(root): return root[0] def setRootVal(newVal): root[0] = newVal def getLeftChild(root): return root[1] def getRightChild(root): return root[2] def insertLeft(self,newNode): if self.left == None: self.left = BinaryTree(newNode) else: t = BinaryTree(newNode) t.left = self.left self.left = t def insertRight(self,newNode): if self.right == None: self.right = BinaryTree(newNode) else: t = BinaryTree(newNode) t.right = self.right self.right = t def buildParseTree(fpexp): fplist = fpexp.split() pStack = Stack() eTree = BinaryTree('') pStack.push(eTree) currentTree = eTree for i in fplist: if i == '(': currentTree.insertLeft('') pStack.push(currentTree) currentTree = currentTree.getLeftChild() elif i not in '+-*/)': currentTree.setRootVal(eval(i)) parent = pStack.pop() currentTree = parent elif i in '+-*/': currentTree.setRootVal(i) currentTree.insertRight('') pStack.push(currentTree) currentTree = currentTree.getRightChild() elif i == ')': currentTree = pStack.pop() else: print "error: I don't recognize " + i return eTree def postorder(tree): if tree != None: postorder(tree.getLeftChild()) postorder(tree.getRightChild()) print tree.getRootVal() def preorder(self): print self.key if self.left: self.left.preorder() if self.right: self.right.preorder() def inorder(tree): if tree != None: inorder(tree.getLeftChild()) print tree.getRootVal() inorder(tree.getRightChild()) class Stack: def __init__(self): self.items = [] def isEmpty(self): return self.items == [] def push(self, item): self.items.append(item) def pop(self): return self.items.pop() def peek(self): return self.items[len(self.items)-1] def size(self): return len(self.items) def main(): parseData = raw_input( "Please enter the problem you wished parsed.(NOTE: problem must have parenthesis to seperate each binary grouping and must be spaced out.) " ) tree = buildParseTree(parseData) print( "The post order is: ", + postorder(tree)) print( "The post order is: ", + postorder(tree)) print( "The post order is: ", + preorder(tree)) print( "The post order is: ", + inorder(tree)) main() And here is the error: Please enter the problem you wished parsed.(NOTE: problem must have parenthesis to seperate each binary grouping and must be spaced out.) ( 1 + 2 ) Traceback (most recent call last): File "C:\Users\Kevin\Desktop\Python Stuff\Assignment 11\parseTree.py", line 108, in main() File "C:\Users\Kevin\Desktop\Python Stuff\Assignment 11\parseTree.py", line 102, in main tree = buildParseTree(parseData) File "C:\Users\Kevin\Desktop\Python Stuff\Assignment 11\parseTree.py", line 46, in buildParseTree currentTree = currentTree.getLeftChild() File "C:\Users\Kevin\Desktop\Python Stuff\Assignment 11\parseTree.py", line 15, in getLeftChild return root[1] AttributeError: BinaryTree instance has no attribute '__getitem__'

    Read the article

  • Wrong figures numbering - Package caption Error: Continued 'figure' after 'table'

    - by Eduardo
    Hello I am having a problem with the numbering of figures using Latex, I am getting this error message: Package caption Error: Continued 'figure' after 'table' This is my code: \begin{table} \centering \subfloat[Tabla1\label{tab:Tabla1}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 1}} \\ \hline ... ... \end{tabular} } \qquad \subfloat[Tabla2\label{tab:Tabla2}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 2}} \\ \hline ... ... \end{tabular} } \caption{These are tables} \label{tab:Tables} \end{table} \begin{figure} \centering \subfloat[][Figure 1]{\label{fig:fig1}\includegraphics[width = 14cm]{fig1}} \qquad \subfloat[][Figure 2]{\label{fig:fig2}\includegraphics[width = 14cm]{fig2}} \end{figure} \begin{figure}[t] \ContinuedFloat \subfloat[][Figure 2]{\label{fig:fig3}\includegraphics[width = 14cm]{fig3}} \caption{Those are figures} \label{fig:Figures} \end{figure} \newpage What I want to do, it is to have this configuration: Table Table Figure 1 Figure 2 Figure 3 Since Figure 1 and Figure 2 are too big to fit vertically I want the Figure 3 to be alone in another page that's why I have the \ContinuedFloat. Externally looks fine but the problem is the numbering, I am getting for the Figures the number 5.2, that is the same number that a Figure I have before (The correct number should be 5.3). However if I try to reference the figures: \ref{fig:fig1}, \ref{fig:fig2} y \ref{fig:fig2} I get: 5.3a, 5.3b y 5.2c The two first right the last one wrong. I have been stuck with this for hours any ideas?. Thans a lot in advance

    Read the article

  • Why do I get a connection error / timeout when using python suds to connect to Microsoft CRM?

    - by Chris R
    When I try to connect to an MS CRM web service using suds/python-ntlm, I am getting a timeout on requests. However, the code that I'm trying to replace -- which calls out to the cURL command line app to do the same call -- succeeds. Clearly something is different in the way that cURL is sending the command data, but I'll be damned if I know what the difference is. Below are the full details of the various calls. Anyone got any tips? Here's the code that is making the request, followed by the output. The cURL command code is below that, and its response follows. Hosts, users, and passwords have been changed to protect the innocent, of course. wsdl_url = 'https://client.service.host/MSCrmServices/2007/MetadataService.asmx?WSDL' username = r'domain\user.name' password = 'userpass' from suds.transport.https import WindowsHttpAuthenticated from suds.client import Client import logging logging.basicConfig(level=logging.INFO) logging.getLogger('suds.client').setLevel(logging.DEBUG) logging.getLogger('suds.transport').setLevel(logging.DEBUG) ntlmTransport = WindowsHttpAuthenticated(username=username, password=password) metadata_client = Client(wsdl_url, transport=ntlmTransport) request = metadata_client.factory.create('RetrieveAttributeRequest') request.MetadataId = '00000000-0000-0000-0000-000000000000' request.EntityLogicalName = 'opportunity' request.LogicalName = 'new_typeofcontact' request.RetrieveAsIfPublished = 'false' attr = metadata_client.service.Execute(request) print attr Here's the output: DEBUG:suds.client:sending to (http://client.service.host/MSCrmServices/2007/MetadataService.asmx) message: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> DEBUG:suds.client:headers = {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml'} DEBUG:suds.transport.http:sending: URL:http://client.service.host/MSCrmServices/2007/MetadataService.asmx HEADERS: {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml', 'Content-type': 'text/xml', 'Soapaction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"'} MESSAGE: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> ERROR: An unexpected error occurred while tokenizing input The following traceback may be corrupted or invalid The error message is: ('EOF in multi-line statement', (16, 0)) --------------------------------------------------------------------------- URLError Traceback (most recent call last) /Users/crose/projects/2366/crm/<ipython console> in <module>() /var/folders/nb/nbJAzxR1HbOppPcs6xO+dE+++TY/-Tmp-/python-67186icm.py in <module>() 19 request.LogicalName = 'new_typeofcontact' 20 request.RetrieveAsIfPublished = 'false' 21 ---> 22 attr = metadata_client.service.Execute(request) 23 print attr /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in __call__(self, *args, **kwargs) 537 return (500, e) 538 else: --> 539 return client.invoke(args, kwargs) 540 541 def faults(self): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in invoke(self, args, kwargs) 596 self.method.name, timer) 597 timer.start() --> 598 result = self.send(msg) 599 timer.stop() 600 metrics.log.debug( /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in send(self, msg) 621 request = Request(location, str(msg)) 622 request.headers = self.headers() --> 623 reply = transport.send(request) 624 if retxml: 625 result = reply.message /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/https.pyc in send(self, request) 62 def send(self, request): 63 self.addcredentials(request) ---> 64 return HttpTransport.send(self, request) 65 66 def addcredentials(self, request): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in send(self, request) 75 request.headers.update(u2request.headers) 76 log.debug('sending:\n%s', request) ---> 77 fp = self.u2open(u2request) 78 self.getcookies(fp, u2request) 79 result = Reply(200, fp.headers.dict, fp.read()) /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in u2open(self, u2request) 116 return url.open(u2request) 117 else: --> 118 return url.open(u2request, timeout=tm) 119 120 def u2opener(self): /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in open(self, fullurl, data, timeout) 381 req = meth(req) 382 --> 383 response = self._open(req, data) 384 385 # post-process response /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _open(self, req, data) 399 protocol = req.get_type() 400 result = self._call_chain(self.handle_open, protocol, protocol + --> 401 '_open', req) 402 if result: 403 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _call_chain(self, chain, kind, meth_name, *args) 359 func = getattr(handler, meth_name) 360 --> 361 result = func(*args) 362 if result is not None: 363 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in http_open(self, req) 1128 1129 def http_open(self, req): -> 1130 return self.do_open(httplib.HTTPConnection, req) 1131 1132 http_request = AbstractHTTPHandler.do_request_ /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in do_open(self, http_class, req) 1103 r = h.getresponse() 1104 except socket.error, err: # XXX what error? -> 1105 raise URLError(err) 1106 1107 # Pick apart the HTTPResponse object to get the addinfourl URLError: <urlopen error [Errno 60] Operation timed out> The cURL command is: /opt/local/bin/curl --ntlm -u "domain\user.name:userpass" -k -d @- -A "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1)" -H "Connection: Keep-Alive" -H "Content-Type: text/xml; charset=utf-8" -H "SOAPAction: http://schemas.microsoft.com/crm/2007/WebServices/Execute" https://client.service.host/MSCrmServices/2007/MetadataService.asmx The data that is piped to that cURL command: <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Header> <CrmAuthenticationToken xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <AuthenticationType xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">0</AuthenticationType> <CrmTicket xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes"></CrmTicket> <OrganizationName xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">CMIFS</OrganizationName> <CallerId xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">00000000-0000-0000-0000-000000000000</CallerId> </CrmAuthenticationToken> </soap:Header> <soap:Body> <Execute xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Request xsi:type="RetrieveAttributeRequest"> <MetadataId>00000000-0000-0000-0000-000000000000</MetadataId> <EntityLogicalName>opportunity</EntityLogicalName> <LogicalName>new_typeofcontact</LogicalName> <RetrieveAsIfPublished>false</RetrieveAsIfPublished> </Request> </Execute> </soap:Body> </soap:Envelope> Here's the response: <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <ExecuteResponse xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Response xsi:type="RetrieveAttributeResponse"> <AttributeMetadata xsi:type="PicklistAttributeMetadata"> <MetadataId>101346cf-a6af-4eb4-a4bf-9c3c6bbd6582</MetadataId> <SchemaName>New_TypeofContact</SchemaName> <LogicalName>new_typeofcontact</LogicalName> <EntityLogicalName>opportunity</EntityLogicalName> <AttributeType> <Value>Picklist</Value> </AttributeType> <!-- stuff here --> </AttributeMetadata> </Response> </ExecuteResponse> </soap:Body> </soap:Envelope>

    Read the article

  • Rails ActiveRecord - Best way to perform an include?

    - by dwhite
    I have three models: class Book < ActiveRecord::Base has_many :collections has_many :users, :through => :collections end class User < ActiveRecord::Base has_many :collections has_many :books, :through => :collections end class Collection < ActiveRecord::Base belongs_to :book belongs_to :user end I'm trying to display a list of the books and have a link to either add or remove from the user's collection. I can't quite figure out the best syntax to do this. For example, if I do the following: Controller class BooksController < ApplicationController def index @books = Book.all end end View ... <% if book.users.include?(current_user) %> ... or obviously the inverse... ... <% if current_user.books.include?(book) %> ... Then queries are sent for each book to check on that include? which is wasteful. I was thinking of adding the users or collections to the :include on the Book.all, but I'm not sure this is the best way. Effectively all I need is the book object and just a boolean column of whether or not the current user has the book in their collection, but I'm not sure how to forumlate the query in order to do that. Thanks in advance for your help. -Damien

    Read the article

  • Sorting deeply nested attributes in Rails

    - by Senthil
    I want to be able to drag and drag App model which is nested under Category model. http://railscasts.com/episodes/196-nested-model-form-part-1 's the Railscast I've tried to follow. Category controller def move params[:apps].each_with_index do |id, index| Category.last.apps.update(['position=?', index+1], ['id=?', Category.last.id]) end render :nothing => true end I'm able to sort Categories with something similar, but since I'm updating an attribute, I'm having trouble. def sort params[:categories].each_with_index do |id, index| Category.update_all(['position=?', index+1], ['id=?', id]) end render :nothing => true end Any help is appreciated.

    Read the article

  • How to fix Index out of range exception on idatareader

    - by Phil
    Good morning stack overflow, I have been forced into using the idatareader as opposed to the sqldatareader which has .hasrows available. In my code I am attempting to handle nulls like this: reader = GetContent(pageid) While reader.Read If reader("content") IsNot DBNull.Value Then content = Replace(reader("content"), Chr(38) + Chr(97) + Chr(109) + Chr(112) + Chr(59) + Chr(98) + Chr(104) + Chr(99) + Chr(112) + Chr(61) + Chr(49), "") If reader("id") IsNot DBNull.Value Then contentid = reader("id") End If Else contentid = -1 content = String.Empty End If End While Outputcontent.Text = content I am getting an 'Index Out of Range Exception' here: If reader("content") IsNot DBNull.Value Then The database does 100% contain 'content'

    Read the article

  • Getting Error System.Runtime.InteropServices.COMException

    - by Savan Parmar
    Hey All, I am using Vb.Net to Create Labels in Microsoft. For that i am using below mantioend Code. Public Sub CreateLabel(ByVal StrFilter As String, ByVal Path As String) WordApp = CreateObject("Word.Application") ''Add a new document. WordDoc = WordApp.Documents.Add() Dim oConn As SqlConnection = New SqlConnection(connSTR) oConn.Open() Dim oCmd As SqlCommand Dim oDR As SqlDataReader oCmd = New SqlCommand(StrFilter, oConn) oDR = oCmd.ExecuteReader Dim intI As Integer Dim FilePath As String = "" With WordDoc.MailMerge With .Fields Do While oDR.Read For intI = 0 To oDR.FieldCount - 1 .Add(WordApp.Selection.Range, oDR.Item(intI)) Next Loop End With Dim objAutoText As Word.AutoTextEntry = WordApp.NormalTemplate.AutoTextEntries.Add("MyLabelLayout", WordDoc.Content) WordDoc.Content.Delete() .MainDocumentType = Word.WdMailMergeMainDocType.wdMailingLabels FilePath = CreateSource(StrFilter) .OpenDataSource(FilePath) Dim NewLabel As Word.CustomLabel = WordApp.MailingLabel.CustomLabels.Add("MyLabel", False) WordApp.MailingLabel.CreateNewDocument(Name:="MyLabel", Address:="", AutoText:="MyLabelLayout") objAutoText.Delete() .Destination = Word.WdMailMergeDestination.wdSendToNewDocument WordApp.Visible = True .Execute() End With oConn.Close() WordDoc.Close() End Sub Private Function CreateSource(ByVal StrFilter As String) As String Dim CnnUser As SqlConnection = New SqlConnection(connSTR) Dim sw As StreamWriter = File.CreateText("C:\Mail.Txt") Dim Path As String = "C:\Mail.Txt" Dim StrHeader As String = "" Try Dim SelectCMD As SqlCommand = New SqlCommand(StrFilter, CnnUser) Dim oDR As SqlDataReader Dim IntI As Integer SelectCMD.CommandType = CommandType.Text CnnUser.Open() oDR = SelectCMD.ExecuteReader For IntI = 0 To oDR.FieldCount - 1 StrHeader &= oDR.GetName(IntI) & " ," Next StrHeader = Mid(StrHeader, 1, Len(StrHeader) - 2) sw.WriteLine(StrHeader) sw.Flush() sw.Close() StrHeader = "" Do While oDR.Read For IntJ As Integer = 0 To oDR.FieldCount - 1 StrHeader &= oDR.GetString(IntJ) & " ," Next Loop StrHeader = Mid(StrHeader, 1, Len(StrHeader) - 2) sw = File.AppendText(Path) sw.WriteLine(StrHeader) CnnUser.Close() sw.Flush() sw.Close() Catch ex As Exception MessageBox.Show(ex.Message, "TempID", MessageBoxButtons.OK, MessageBoxIcon.Error) End Try Return Path End Function Now when i am running the programm i am getting this error.I tried hard but not able to locate what could be the problem the error is:- System.Runtime.InteropServices.COMException --Horizontal and vertical pitch must be greater than or equal to the label width and height, respectively. Even though i tried to set the Horizontal and vertical pitch programatically but it gives same err. Plz if any one can help

    Read the article

< Previous Page | 232 233 234 235 236 237 238 239 240 241 242 243  | Next Page >