Search Results

Search found 8950 results on 358 pages for 'eee pc 1000he'.

Page 237/358 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Safari proxy bypass for IPv6

  - by rhi

  I'm a first-time n00b on Mac (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

  Read the article

• Linksys WRT54GS V6 Router Blinking Power Light

  - by Frank

  I have a Linksys WRT54GS V6 Router in my possession got it at my local goodwill for 5$. Upon start up the Power LED starts flashing like crazy and at the same time the Ethernet ports all light up once then turn off (DMZ and WLAN never turn on). I can ping the router only by setting a static IP on my Pc. I can also successfully push a file (official Linksys OS and DD-wrt) into it via TFTP but this currently does nothing (no 192.1681.1 Access). Any ideas as to what may be wrong? I think its pretty obvious that it's bricked but.. I keep hearing a whole lot of "if it pings it's fixable" on the internet.

  Read the article

• Ubuntu Server login not recognizing the keyboard after entering username.

  - by Jeff Malewski

  I'm having similar issues with logging into ubuntu server. chief problem is that once I enter my user name & hit enter, I can't enter anything ffor my password - it won't accept any keystrokes until I press Ctrl+any key. Once I've pressed Ctrl+ any key, I'm able to type again, but have never been able to enter any more than 3 characters before the 60 sec time limit. This problem is present on fresh installs of both 10.04 & 9.10. Part of the problem is lkely to be my antique pc which is an old Emachines Trigems I850 based mbd and an equally ancient Nvidia 4x AGP video card. Initially I was going to install Ubuntu 10.10, but with ORCA running with both screen reader and full screen magnification crashed the system & smoked a stick of Rambus memory. Is there any fix to this problem? Jeff

  Read the article

• Where exactly does a portable app is running when the usb stick is pulled out without closing that app?

  - by Selin Peck

  Where exactly does a portable app is running when the usb stick is pulled out without closing that app? Is it in memory? Is it written the on hard disk as temporary files (where exactly is it, appdata or where)? Does that mean the next user of the pc could gain access just clicking that from the system tray and saving to other folders? How about when the system crash and that portable app is not closed the normal way? On the next open, will it stay somewhere on temporary folders?

  Read the article

• Mini keyboard has no home/end keys; how to type them?

  - by Steve Crane

  Some months ago I needed a small keyboard and bought an Okion KM229 without noticing that it has no Home or End key. This makes it tricky to type as I'm so used to using these keys. I haven't yet figured out if there is a key combination that issues Home and End keystrokes. Does anyone have experience of these keyboards and know how to issue those keystrokes? The keyboard is used on a PC running Windows XP. I have used the contact form on the Okion USA web site to ask this question but received no response. Wikipedia suggests that Home and End keystrokes are issued with Fn-Left and Fn-Right on some limited size keyboards. I may have tried those but don't remember for sure. I will try them again though when I am on site again in a week or so. Any other thoughts would be welcomed in the meantime.

  Read the article

• Invoking an MMC Snap-in function from Windows command shell: is it possible?

  - by robob

  Sorry for the cross post on Superuser, but I cannot see any answer to my question, so I try to ask the same question here. I need to execute a MMC Snap-in function from the Command Shell of a Windows computer. I need it to schedule this command in the same Windows PC and executes in background. Probably this questions could seem a little bit strange but I have a program that creates a debug log only through its MMC Snap-in console. And I need to automatise this task to programatically read this log! Dows anyone know how to do this? thanks

  Read the article

• Are there significant performance difference between chipsets?

  - by Let_Me_Be

  I wanted to build a single PC to fit all my needs, but since hardware virtualization support (Vt-d specifically) is a huge problem, I decided to build multiple single-use oriented computers. In this scenario I want these computers to be as minimal as possible. So the core of my question is: "Are there significant performance difference between chipsets?" I'm considering Sandy-Bridge i7 or i5 for my "game console" computer. And since I will use only one graphic card, one or two HDD, 4-8GB RAM and nothing else, I would be fine with a micro-ATX board with a Q67 (or some other low-end chipset).

  Read the article

• Download folders from dev server to local drive

  - by Niall Collins

  I am developing a .net web application on a local environment. I have a dev server that the application is installed on. Within the web application on the dev server I have four folders that I dont have locally and that are controlled by another application. In my day to day development I require the four folders on local PC. I would like to automate the process of pulling the folders from the dev server to my local drive, so I can keep thing in sync. Ideally something like this Run file from main folder (be it a bat file, powershell, some sort of job, open to recommendations) Download 4 folders supplied to it. First download bring everything down, from them on only pull the changes Not sure where to start with achieving this but would appreciate any help would with. I know there are apps out there that do something like this but would like to give a go writing something to do this before I resort to using one of them.

  Read the article

• Why does VirtualBox want my attention every morning?

  - by Ken

  I'm running Vista 64-bit Ultimate on this PC. On it, I've installed VirtualBox, and in that I'm running Linux. Everything's working great. I leave it running all the time. When I come in in the morning, every time, the "Sun VirtualBox" item in the Windows taskbar is bright orange, like it's trying to get my attention. What would cause this? I'm curious both if somebody has an idea of something VirtualBox might do that warrants this attention-grab, or what to look for in the VB logs to find out what causes this. I'm sure it's harmless, but I'd like to stop it if I can.

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• Is there a way reinstall a fresh Adobe trial on Mac?

  - by Moshe

  I was wondering if it is easier to fool the Adobe Installer into giving a second and third etc 30 day trial of various product on Mac OS X 10.5 than it is on Windows. Is this doable? How so. I am expecting to get a PC version of CS4 soon possibly through a legit source, this is just for the interim. Edit : I am not a big fan of pirating, but as I stated above, I expecting a legit copy soon. Why the downvotes?

  Read the article

• Static when metal USB plug touches my case, and other electrical problems.

  - by Archagon

  I have an aluminum PC case. Whenever the metal USB plug from my external drive contacts the front, I get crackling from my speakers, which are connected to an external USB soundcard. (This crackling happens even if they're not connected to the actual output jack.) A few possibly related problems: my audio occasionally starts popping once every few minutes, and my USB devices sometimes play the "connected" sound in Windows even though they're already connected, as if they're briefly disconnecting. My guess is that this has to do with the grounding, but I'm not sure exactly what to do. My case has a round grounding wire, but I don't know where to attach it, and fiddling with it didn't seem to have any effect. Suggestions?

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by user10321

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• Getting kernel errors when manually mounting VirtualBox shared folders

  - by Ross

  Updated: I've rephrased this problem as I understand it a bit more now (and have encountered another problem). I'm using a Fedora 15 guest on a Windows 7 host using VirtualBox. I am trying to mount a partition on the host PC as a shared folder for use in the guest. The folder appears in /media and is accessible when I use the auto-mount feature when setting up the shared folder, but when I attempt to mount without auto-mount I get the following error: $ sudo mount.vboxsf data /mnt/host_data /sbin/mount.vboxsf: Could not add an entry to the mount table.: Invalid argument In addition a popup appears (part of Fedora/GNOME) reporting a crash in the kernel package: WARNING: at lib/list_debug.c:26 __list_add+0x3e/0x81() However the shared folder seems to work, I can certainly browse it (although everything seems to be executable, probably down to a Windows host). Is there something wrong with what I'm doing or is this a bug (and in which case should it be reported to the Linux Kernel team or VirtualBox)?

  Read the article

• How can I join non-consecutive partitions on internal hard disk?

  - by Andy

  I recently installed a new, larger hard disk in my PC at work (the office wouldn't spring for an upgrade for my 75GB disk, so I brought my own 2TB disk in from home). I managed to clone the original drive using CloneZilla, but now I have a 75GB partition on my new drive, followed by a 300MB partition, followed by a 1794.65GB of unallocated space. What I want is to add the unallocated space to the 75GB partition, thereby maximizing my C: drive. However, when I right-click on the C: partition, the option to "Extend Volume" is grayed out. How do I get all my fancy new extra space to be part of my C: drive? I also tried booting with GParted, but I get the same deal - cannot adjust the C: drive because there's no contiguous space.

  Read the article

• Patriot-2 RAM on ASUS PK5-E not running at PC2-8500?

  - by evan

  I have a P5K-E Motherboard and recently upgraded to 8GB of RAM (4 2GB sticks of PC2-8500 1066 MHz - Patriot Viper 2). When looking at the RAM with PC Wizard 2010 it's showing the RAM being recognized PC2-6500. I've read elsewhere that this is a common problem and requires manually changing the DRAM Voltage in BIOS to 2.2. I've done this and I'm still getting it recognized as PC2-6500. (I also manually set the FSB speed to 1066MHz instead of the AUTO). Any ideas on how to get this memory working properly? Thanks in advance!

  Read the article

• Trackpad Drag lock pissing me off with Windows 7

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

• HDD situation - what would be best - data and backup

  - by Sam Johnson

  I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

  Read the article

• Norton Backup "Failed to Restore"

  - by Teknophilia

  I recently had one of my computers (XP) die on me. I had it's files set to automatically backup to another PC's HD using Norton. I've tried using Norton restore on the second computer to try and restore some files (word documents, pictures), but when I try to do this, I get a dialog box saying that it "Failed to Restore". When I click to continue, it shows a list of the files I tried to restore, along with a status indicator for each file (which says "invalid file"). Any ideas?

  Read the article

• What prevents Windows from entering standby?

  - by Arne

  Is there a tool or method to find out, what prevents Windows Vista 32 bit from entering the standby mode? My home pc is set to standby after a certain time of inactivity. But quite often it just stays awake and I have know idea why. I know of things that will keep it awake and already checked devices and network to no avail. I suspect there is some application or service that tells the os to stay active and I hope there is some tool to find the culprit.

  Read the article

• Port forwarding through a client bridge

  - by Gabe Tanenhaus

  I am having a problem with port forwarding with a client bridge. My main router is a 2wire router from AT&T using their firmware. It is a Router/Modem. In my room, there is a Linksys WRT54GL with DD-WRT on it. I have set up the DD-WRT one as a Client bridge for my PC. I can access the internet on my computer using it but when I try and port forward, the ports stay closed. I am port forwarding on my main router (2wire) and it doesn't work. I have checked online and all I see is that I should only need to forward on the main router since the client bridge has NAT disabled, but it seems to not work that way. Any ideas?

  Read the article

• How to establish SIP connection, when SIP-proxy is required?

  - by LA_

  I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >