Search Results

Search found 8950 results on 358 pages for 'eee pc 1000he'.

Page 234/358 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• VMWare Host needing ESXi 5.0 - Running on a 2008 R2 Host?

  - by Great Big Al

  I have a VMWare image supplied by my Phone System provider which manages a contact management interface, they tell me that VMWare EsXi5.0 is the highest supported host. I'm used to MS HyperV and have no VMWare experiance. At present I have this guest running on a simple desktop PC running ESXi5.0.0, I'd idealy like to run this guest (it's Windows 7 with their software already installed and configured) on a Windows 2008R2 server I have available, as I said, I'm used to HyperV and I can't easily identify if there is a version of VMWare that supports ESXi5.0 guests that will run on a Windows 2008 R2 server host. Is there such a product, what's it called, and with one guest can I run it without purchasing a license? Thanks

  Read the article

• Where do I connect the two red SATA cables on my motherboard?

  - by Dennis Smith

  I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

  Read the article

• How can I convert videos for Sony Xperia U on my Linux box?

  - by Konstantin

  I would like to send a few videos for my girlfriend, but I would ensure they are playable on her mobile phone. I want to carry out the encoding tasks on my Arch Linux box, because my PC is a low end. I can use only ffmpeg or mencoder or other CLI tool. She can play youtube videos but I don't want to upload such videos to youtube. Are there any presets for specific mobile phones? And when she simply clicks a video direct link will it play directly on the cellphone or should I embed it in a html5 / flash player, like on youtube?

  Read the article

• where are flash settings stored locally on Ubuntu

  - by Joseph Mastey

  It's possible change flash settings on your computer at this URL: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html However, given that Macromedia has no problems setting LSO cookies on your HDD that you cannot find, I am a little bit skeptical that the settings I've tweaked there would be saved. So, I'd like to be able to look locally on my PC and verify the settings. Where can I find the settings for Flash locally? Surely the plugin cannot be heading to Macromedia itself for them (that is a future too bleak to contemplate). I am running Ubuntu 10.04. Thanks, Joe

  Read the article

• Playing 3D mkv on 3D TV

  - by user137713

  I just bought a brand new LG 42LW4500 TV with enabled 3D think its passive any how i have an option to convert 2D 3D i also got a full set of normal 3D Glases. Now today i downloaded a 3D movie (14GB) Full HD in a mkv format i hooked up my PC to my TV and opened the mkv in VLC player and what i got was 2 pictures in one screen sowing same thing. Now i am lost from here i enabled 3D but it didnt really feel like 3D. Can anyone shed some ligth on how can you play 3D movies do i need to use 2D 3D conversion on tv or?

  Read the article

• LamedropXPd-like very simple zipper?

  - by overtherainbow

  Hello A friend of mine needs to zip a bunch of MP3's on her locked-down XP or Vista PC at work. There are two requirements: Since she doesn't have admin rights, the application should either not require an installer, or the installer doesn't require admin rights (don't know if it's possible) Ideally, the UI should be as dead-simple as eg. LamedropXPd, ie. just drag 'n drop files from Windows Explorer onto the icon, and off she has a ZIP file in the same directory as where the MP3's are located. Does someone know of such a utility? Thank you.

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Windows Experience Index Dropped After Adding Dedicated Graphics Card

  - by Ludo

  I purchased a new PC with a Gigabye Z68X-UD3H-B3. I had a Radeon HD 5450 graphics card spare, so I've added that instead of using the onboard graphics as I just presumed it would be better. But, my windows experience index has gone down. From 5.4 to 5. Dekstop Performance has dropped from 5.4 to 5, although gaming graphics has gone up from 5.9 to 6.2. I'm not actually going to be using the machine for gaming, just audio production, but I added the card as I'll possibly be doing video editing in future too. Why would this be? Can I trust windows experience index scores? Or is it possible the onboard stuff is just better for general desktop stuff? Thanks! Ludo.

  Read the article

• Any opinions on Paragon's NTFS for Mac solution?

  - by AngryHacker

  I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

  Read the article

• Does anyone still use Iometer?

  - by Brian T Hannan

  "Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It is used as a benchmark and troubleshooting tool and is easily configured to replicate the behaviour of many popular applications." link text Does anyone still use this tool? It seems helpful, but I'm not sure if it's for the thing I am trying to work on. I am trying create a benchmark computer performance test that can be run before and after a Windows Optimization program does its stuff (ex: PC Optimizer Pro or CCleaner). I want to be able to make a quick statement like CCleaner makes the computer run 50% faster or something along those lines. Are there any newer tools like this one?

  Read the article

• cannot access new drive through nfs

  - by l.thee.a

  I am running nfs-kernel-server to access my files on my linux machine(ubuntu - /share). The disk I have been using is full. So I have added a new disk and mounted it to /share/data. My other pc mounts the /share folder to /mnt/nfs; but cannot see the contents of /mnt/nfs/data. I have tried adding /share/data to /etc/exports, but it did not help. What do I do? PS: I am looking for another solution than explicitly mounting /share/data on the second drive.

  Read the article

• Moving a VM from MS Virtual Server R2 to VirtualBox

  - by AngryHacker

  I have a Windows 2000 Professional VM happily running under MS Virtual Server R2 on WindowsXP. I need to move it to a different PC and the only one available is a Mac with VirtualBox on it. Theoretically, VirtualBox accepts .VHD files out of the box, but my attempts to run my VHD on VirtualBox resulted in failure. The Guest OS just keeps rebooting. I've attempted to get help on the VirtualBox forums, and they said that the VM image must first be prepped for the move, but could not give me any specifics. Anyone here know what is specifically involved in moving a Win2k .VHD to VirtualBox on the Mac?

  Read the article

• How to quickly switch monitors on multi-monitor setup?

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

  Read the article

• What equipment do real ISP's use?

  - by Allanrbo

  In a dormitory of 550 residents, people often mistakenly set up DHCP servers for the whole network by plugging in their private Wi-Fi routers wrongly. Also recently, someone mistakenly configured their PC to a static IP being the same as that of the default gateway. We use cheap 3Com switches at the moment. I know that Cisco switches support DHCP snooping to solve the DHCP problem, but that still does not solve the default gateway IP takeover problem. What sort of switch equipment do real ISP's use so their customers cannot break the network for the other customers? What we ended up doing In case anyone are courious, we ended up doing seperate VLANs for each user. And as a matter of fact, not just the 550 users, but for 2500 users (11 dorms). Here's a page describing the setup: http://k-net.dk/technicalsetup/ (the section "Transparent firewall using VLANs"). There was no significant load on the router server as I feared in one of the comments below. Even at 800Mpbs.

  Read the article

• Ultra-lightweight web browser?

  - by zildjohn01

  Are there any good super-lightweight graphical web browsers out there? I'd like to be able to browse the web on an old PC, but the mainstream crop of browsers is just too heavy, and I don't want to resort to something like Lynx. There must be something decent out there that'll fit in 16 or 32MB of RAM comfortably. 100% standards compliance isn't necessary, but I'd like something that supports the most widely used parts of CSS and JavaScript. The goal is to get 98% of sites usable in a nice, graphical format.

  Read the article

• Windows 7 systeminfo reporting incorrect System Boot Time?

  - by rdingwall

  I work 9-5 and switch my PC off when I leave the office each day. When doing timesheets I need to know what time I got to work, so I usually use cmd systeminfo for finding the System Boot Time. Since upgrading to Windows 7 however, it's started reporting bizarre numbers between 11pm-2am instead of 8-9am. Today it says it booted at 11:34pm last night! I checked the event log and there is no entries between when I shutdown at 5:30pm yesterday and booted around 8am this morning. Has anyone else encountered this?

  Read the article

• Are there any sFTP clients that support a proxy that uses NTLM authentication?

  - by Iraklis

  The title pretty much summarizes the question. We have deployed an sFTP server that needs to be accessed from our client's MS Windows Pc's that reside within a restricted local area network. The only way they can get out for their Intranet is to use an HTTP proxy that requires NTLM authentication. From what I understand all open-source sFTP clients (FilleZilla,WinSCP,etc) do NOT support NTLM authentication (Because of legal issues). I know that there are workarounds to this (installing a local proxy at the machine that understands NTLM) but this would break all sorts of security policies of our client. So my question is : Does anyone know of any sFTP client that supports a NTLM Proxy?

  Read the article

• Unexpected network traffic?

  - by robwalker

  My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

  Read the article

• Hybrid drive not booting faster than a normal HD

  - by Nigel Trotter

  I have used Windows 7 to create an image of my existing standard 160GB HD and copied this image back to a bigger 500GB Seagate hybrid drive. After copying the image to the hybrid I had to resize the partition, which was fine but after rebooting a few times to "teach" the hybrid, I have no increase in boot speed. It still takes 20-25 seconds to close down and then over a minute to start up. Is this something to do with the way the image lays itself on the drive indiscriminately? Do I need to load the OS on the drive from scratch to get the benefits? My PC with an i5 processor, is using AHCI mode.

  Read the article

• Configure Windows Routes for VPN

  - by Florin Sabau

  I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

  Read the article

• RDP for High DPI Monitors?

  - by Joey

  A client is having some problems with their laptop. They use RDP to remote into their work PC, but the laptop they are using is a small 13" Sony Vaio laptop, but with 1920x1080 resolution. Everything is pretty small on the laptop anyway, but the problem is much worse after connecting with RDP, where everything is almost unreadable. I have done the obvious with changing the resolution on the server, the RDP size, forced scaling on the terminal server etc, but nothing has worked. Something else which I would normally do is change the laptop resolution to something a little lower, but the laptop only has 2 resolution settings, the big one, and a 1024x768 (wrong ratio). Any ideas?

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• Move virtual machine hard disk to a separate physical hard disk for better performance?

  - by joeeoj

  I have a dual-core machine with the host OS and many guest virtual OSs. Although I have 8GB of RAM, I notice a slowdown when I turn some virtual machine on (and it takes only 1GB RAM). I was told that I should move virtual machine hard disk file to a separate (another) physical hard drive in my PC to get better performance. This way the head of the hard disk would not have to jump from the virtual OS to the host OS as each hard drive would have its own head to deal with the OS: hard drive 1 head for host OS and hard drive 2 head for guest OS. Is this true? Should I get another hard disk only for virtual machine hard disk files?

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >