Search Results

Search found 17808 results on 713 pages for 'installation package'.

Page 237/713 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• SBS 2003 boot stalls at acpitabl.dat

  - by John

  I have a SBS 2003 server running for 3 year without any problems, and few days ago it freezes during the boot. System is using two 500 Gb drives in RAID1 (Intel Matrix 7.5) After trying to load in safe mode, boot stops on acpitabl.dat. First idea was that there is a problem with RAID altough disk status was OK, and RAID status was Rebuild. I tried to boot with each drive, and one gives me the same problem, and the other drive is failing to load. Took both drives out, and checked it on a different machine. One drive is dead, other is without any problems. Returned the good drive back in SBS 2003 with changed status to Degraded, but the problem is still the same. I also have a clean SBS 2003 copy installed on this drive (previous installation), which loads smooth and quick. So, I believe the main problem is this installed version of SBS 2003. Did not make any hardware changes, did not make any updates (not sure about any automatic windows updates lately). Since there are tons posts about this problem, and no clear solution, I am trying to figure how to repair SBS 2003 installation, since there are some installed programs on this installation which I cannot re-install without additional issues.

  Read the article

• Why does this preseed for gitolite fail?

  - by troutwine

  I'm installing gitolite on a Debian Squeeze box with the following preseed: gitolite gitolite/gituser string git gitolite gitolite/adminkey string ssh-rsa AAAAB3ECT gitolite gitolite/gitdir string /var/lib/git On installation: # debconf-set-selections /var/cache/debconf/gitolite.preseed # apt-get install gitolite Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: git-daemon-run gitweb The following NEW packages will be installed: gitolite 0 upgraded, 1 newly installed, 0 to remove and 26 not upgraded. Need to get 0 B/114 kB of archives. After this operation, 348 kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package gitolite. (Reading database ... 24715 files and directories currently installed.) Unpacking gitolite (from .../gitolite_1.5.4-2+squeeze1_all.deb) ... Setting up gitolite (1.5.4-2+squeeze1) ... adduser: The home dir must be an absolute path. dpkg: error processing gitolite (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: gitolite E: Sub-process /usr/bin/dpkg returned an error code (1) Why? The pre-seed was extracted from a manually configured installation, per here and exists without issue on another machine.

  Read the article

• Fix Linux-made png file for use on Windows

  - by BGM

  There is a particular icon library that I really like. Now, I have downloaded the package that has the png files inside (I know the ico files are there, but I want the png files). However, about my Windows 7 computer tells me that about 1/3 of the png files are corrupt. I usually use XnView to view the files, and it won't display the "corrupt" files. I've tried other editors and viewers and I get the same issue. Now, the png package was originally designed for Linux to be an OS-icon-package for the entire system, so I figure the png files were built in Linux. So, is there a way I can "fix" the "corrupted" png files for my Windows 7 computer? Maybe when the files were created there was some bit that was off-colour or something? Any clues? [edit] I have read in this thread that the "corruption" could happen during the extraction process. I did all the extraction with 7-zip. It was a zip containing a tar. I will try another extractor, but I don't think it will make any difference.

  Read the article

• Windows Feature List blank, Updates fail, system readiness tool says files are corrupt

  - by Chris T

  I tried to install IIS and to my surprise the feature/components lists was blank =[. I tried the system update readiness tool and it creates the following log: ================================= Checking System Update Readiness. Binary Version 6.1.7100.4104 Package Version 5.0 2009-09-30 23:38 Checking Deployment Packages Checking Package Manifests and catalogs. (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_1_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_1_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.cat (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_for_KB973540_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_for_KB973540_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.cat Checking package watchlist. Checking component watchlist. Checking packages. Checking component store (f) CSI Catalog Corrupt 0x800B0003 winsxs\Catalogs\efdfd17ac9909b9d81e1455d9abf291319237877c23df8a67a3f5a1f2f9e034f.cat 5fbf0b9691b..6772f1b0a58_31bf3856ad364e35_6.1.7100.4127_c2160c1f90006ee6 (f) CSI Manifest All Zeros 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_35ba254677b2a294.manifest amd64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_35ba254677b2a294 (f) CSI Manifest All Zeros 0x00000000 WinSxS\Manifests\wow64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_400ecf98ac13648f.manifest wow64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_400ecf98ac13648f Summary: Seconds executed: 240 Found 9 errors CSI Manifest All Zeros Total Count: 2 CSI Catalog Corrupt Total Count: 1 CBS MUM Corrupt Total Count: 3 CBS Catalog Corrupt Total Count: 3 How can I fix this?

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• How to install a desktop environment onto Ubuntu Server -- but without internet access or a CDROM?

  - by James

  I am playing around with a computer which has no CDROM drive or internet access and I have installed Ubuntu Server onto it. I have that all up and running nicely but now I'd like to install Xfce, GNOME or something similar so I can load up a desktop environment from the command line if I wish. Obviously with internet access or a CDROM, this would be a simple task of using apt-get and it finding & retrieving the packages for me, I assume, but I do not have either. I do however have a USB drive and I have used Unetbootin to make it into a bootable drive with the Ubuntu Server disk image files on there. I have mounted the USB drive to /media/usb0 and tried the command "sudo apt-cdrom add -d /media/usb0" to get apt to recognise the USb drive as an "Ubuntu CD" -- a source of package files but apt-get doesn't seem to be finding Xfce.. I try "sudo apt-get install xfce" and "sudo apt-get install xfce4" but neither find the package.. I would prefer to have Xfce but GNOME would be OK too.. My question is, am I doing something wrong? I figured that the Ubuntu Server disk (or rather, my Ubuntu Server USB drive) might not have any desktop environment packages on there so I tried the Xubuntu Desktop disk too (again, from my USB drive). I tried "sudo apt-get install xubuntu-desktop" but it couldn't find the package - even though it is listed under the /casper/ directory in some MANIFEST file. Anyone see where I'm going wrong? Maybe apt-get install is looking somewhere other than my USB drive? Maybe my commands are wrong? Maybe the disks don't even have the desktop environments on!? Thanks in advance guys, any input would be much appreciated. Cheers - James

  Read the article

• Moving the Windows 7 Pro OEM image to computer with the same hardware

  - by SWin

  We bought 8 clean computers (even without HDD) with the same hardware and bought eight Windows 7 Pro OEM disks. Now I prepare one Win7 installation without activation but with all required programs, settings, etc. Then I'm going to clone the image to other computers even without sysprepping. I'm going to change the product key to legal number at COA sticker on each computer and make the activation through the Internet. Will this scenario work? I know that OEM's license agreement forbids the image cloning and the actions I'm going to do breaks the agreement. According the license agreement I should make the manual clean install of Win7 on each computer. But how Microsoft and other viewers can determine the cloning fact? All computers are the same and license Win7 DVDs are also the same. However in my case the installation time also will the same (and may be kind of installation code or something else) and this is not good. Will the Win7 activation work? Can I be sure that activation will not damage after some time? Can Microsoft determine the cloning fact during the activation process? Thank you.

  Read the article

• best practices for setting up a new windows 2008 R2 server with ec2 AWS

  - by Alex

  Can someone comment what they would add to the following list of SOP in terms of best practices? This is being set up on AWS, and then after further testing, back in our datacenter. Standard Operation Procedure (SOP): Installation Part: 2 - Installation of Software Components in Windows 2008 R2 (Updated). Step: 1 Logon to the host through Remote Desktop. Strp: 2 Open Server Manager - Server Roles - Install Web Server IIS 7.5 with compatible of IIS 6 features and Management compatibility mode. Step: 3 Open IE/Mozilla to Download the below listed software's and save all installation files to folder called "AWS Server Install Files" for future reference.. Net Framework 2.0 (Download that from internet) Crystal reports for .Net Framework 2.0 (x64) (Download that from internet) SQL Server 2005 (AWS Image) Step: 4 Once all software's saved on local drive, then Install it one by one. Step: 5 Navigate to Desktop folder to install the below listed softwares. Microsoft Asp.net 2.0 AjaxExtention 1.0 (placed on Desktop \Softwares) WebEx recorder. (placed on Desktop \Softwares) Winrar(placed on Desktop \Softwares) Step: 6 Make sure all the software are working fine. Step: 7 Inspect the server once entirely. Step: 8 Logoff & Stop the Instance.

  Read the article

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

  Read the article

• Install Exchange 2013 with DSC

  - by Alain Laventure

  I tried to install Exchange 2013 with the resource windowsProcess in existing Exchange Configuration. All prerequisites are installed (the Exchange Organization still exists). This is my Resource section: WindowsProcess Exchange2013 { Credential=$credential Path= "C:\Sources\Cumulative Update 5 for Exchange Server 2013 (KB2936880)\Setup.exe" Arguments= "/mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /TargetDir:C:\EX2013" Ensure= "Present" } #End Filter } #End Node } # End configuration /* @TargetNode='TargetDSC02' @GeneratedBy=exadmin @GenerationDate=08/02/2014 08:16:03 @GenerationHost=SOURCEDSC02 */ instance of MSFT_Credential as $MSFT_Credential1ref { Password = "Password1"; UserName = "S05\\Exadmin"; }; Exadmin is a member of Orgaganization Management Group and it is also member of Domain Admin Group, to be able to install Exchange When I execute this resource , Exchange Installation Start but after 1 minute the installation stops with this error: Failed [Rule:GlobalServerInstall] [Message:You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.] To be sure that the right is really the problem I create a special User with only Administrator right of the Exchange server and with no Exchange Permission I run manually on the new Exchange server .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And I got the Same error that with DSC. After I add my test user in the Organization Management Group and I run again manually .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And the Exchange 2013 installation finish without any error. That prove that the problem with DSC is Permission right.

  Read the article

• How to correctly deploy Adobe Reader 9.1

  - by Ben Gillam

  Hi I have recently tried to deploy Adobe Reader 9.1 onto our network here. (SBS 2003 server and XP Workstations) I followed the instructions for the extraction of the installer and .msi and then creating a .mst transform file to set custom options. (Suppress EULA, dont create desktop icon etc) I then added the package to my deployment GPO applied the relevant .mst file and preceded to deploy accross the network. The software package is computer assigned to be installed prior to logon, to avoid user permissions issues. The package deploys correctly to computers and will run perfectly fine if you run from a shortcut, however when trying to view a pdf from within a web browser it fails with the following message. "The adobe acrobat/reader that is running can not be used to view PDF files in a web browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again" I have found many pages on google refering to this problem, but none appear to be in relation the problems I have found. http :// kb2.adobe.com/cps/405/kb405461.html These fixes recommend correcting a registry entry (which i should mention is missing after the deployed installation. However this does not work. Switching off display in a browser - Seems to defeat the object of fixing the problem Removing old versions - There arent any. Trying with a different user - This affects all users of all privalige levels on all computers. On my workstation I uninstalled Acrobat Reader 9.1 then reinstalled manually using the same installation source files and it works fine. has anyone sucsessfully deployed AR9.1 on their domain and if so how? For the time being I have downloaded the older 8.1.3 release and deployed this in the same way which works fine, but would like to be using the up to date version. Thanks

  Read the article

• Chef bash resource not executing as specified user

  - by Arthur Maltson

  I'm writing a Chef cookbook to install Hubot. In the recipe, I do the following: bash "install hubot" do user hubot_user group hubot_group cwd install_dir code <<-EOH wget https://github.com/downloads/github/hubot/hubot-#{node['hubot']['version']}.tar.gz && \ tar xzvf hubot-#{node['hubot']['version']}.tar.gz && \ cd hubot && \ npm install EOH end However, when I try to run chef-client on the server installing the cookbook, I'm getting a permission denied writing to the directory of the user that runs chef-client, not the hubot user. For some reason, npm is trying to run under the wrong user, not the user specified in the bash resource. I am able to run sudo su - hubot -c "npm install /usr/local/hubot/hubot" manually, and this gets the result I want (installs hubot as the hubot user). However, it seems chef-client isn't executing the command as the hubot user. Below you'll find the chef-client execution. Thank you in advance. Saving to: `hubot-2.1.0.tar.gz' 0K ...... 100% 563K=0.01s 2012-01-23 12:32:55 (563 KB/s) - `hubot-2.1.0.tar.gz' saved [7115/7115] npm ERR! Could not create /home/<user-chef-client-uses>/.npm/log/1.2.0/package.tgz npm ERR! Failed creating the tarball. npm ERR! couldn't pack /tmp/npm-1327339976597/1327339976597-0.13104878342710435/contents/package to /home/<user-chef-client-uses>/.npm/log/1.2.0/package.tgz npm ERR! error installing [email protected] Error: EACCES, permission denied '/home/<user-chef-client-uses>/.npm/log' ... npm not ok ---- End output of "bash" "/tmp/chef-script20120123-25024-u9nps2-0" ---- Ran "bash" "/tmp/chef-script20120123-25024-u9nps2-0" returned 1

  Read the article

• Vmware Workstation, Win7 host, Ubuntu guests with Nat + Host-only networks but they cannot connect to the Internet

  - by Ikon

  I have a Win7 host machine with Vmware Workstation. In the workstation I have 3 Ubuntu installed. All 3 Ubuntu guests have a Nat network - to access the internet without asking the router for a local address - and a Host-only network - to connect all Ubuntu quests and the host in a private network for internal communication, without touching the router. When I try to make any of the Ubuntu quests to get data from the internet - assuming that they would figure out that the Nat-ed interface can access the requested data - they fail and report that there is no route to my query. If I disconnect the 2nd interface on the Ubuntu guests with the Host-only network and restart networking, they start to know the route to the internet. Odd, during the installation of the guests they asked which of the 2 given interfaces - with Nat and Host-only config - should be used to get updates during installation and they oddly managed to get the updates. Not so after the installation has finished and rebooted. I have checked the Virtual Network Editor that the Nat interface should use my real network card to access the net, so there should be no problem. I wish not to use the router's dhcp service to give the Ubuntu quests an address, and also I don't want the guests to be accessable from the local network directly, but only by the host - that's the Host-only network is for. Any suggestions? Edit: 192.168.189.0 is the Nat interface and 192.168.7.0 is the Host-only. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.189.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.189.2 0.0.0.0 UG 100 0 0 eth0

  Read the article

• Trouble with Russian pc's on my wifi

  - by hogni89

  I have created a WiFi hotspot for the local community. The problem is, some Russian PC's (Windows XP, Windows Vista and Windows 7) can't get internet connection (We have a lot of bypassing russian fishing vessels / cargo ships). The pc's obtain a valid IP address, and some of them can even manage to send some few packages - But none of them are usable on the network. They all say "Limited internet access" or "???????????? ?????? ? ????????". The thing these PC's have in common is, that they all run a Russian installation of Windows. No one else has problems with the WiFi hotspot - Danish and English Windows, Linux and OS X all work like a charm. Can it be, that there is a difference between the danish / english windows installation, compared to the Russian installation? EDIT START They can't ping the router (One PC got one response - ONCE), they can't access any sites and Windows newer asks "Is this network public, home or work?". EDIT END PS: The hotspot is a airMAX rocket M from Ubiquiti Networks, Inc (www.ubnt.com)

  Read the article

• Can't start Windows 7 after cloning HDD

  - by Paul

  Brief description: cloned HDD1 - HDD2 HDD1 partition 1 boots HDD1 partition 2 boots HDD2 partition 1 boots HDD2 partition 2 doesn't boot Windows, but is bootable in general Now verbosely: In all the cases computer is the same. I have two Windows 7 installations on HDD1 - both are booting fine. I choose between them using standard Windows 7 boot loader menu. Technically there are 4 partitions: 100 MB Boot loader partition (active), Windows 7 copy 1 (25 GB), Windows 7 copy 2 (150 GB) and Working partition. All are primary. In past few days I tried to clone the whole HDD1 to HDD2 of the same size (but 2,5 inch form factor) as is using Minitool Partition wizard. Everything has been copied, all files are accessible, no faults in file system structure, even boot loader wasn't damaged and I hadn't to repair it. But I can boot only first installation of Windows 7 (it boots without issues). When I choose the second installation, I get immediately a completely black screen without any texts, cursors and other data. HDD isn't accessed after that. This black screen is sensitive to Ctrl-Alt-Delete which causes computer reboot. I did some experimenting: Installed Windows 7 to that partition - it booted fine. Then I renamed "Windows" to "Windows.old" and copied Windows directory from HDD1 as it was, using Far Manager, and got the same troubles - black screen. (Of course I performed renaming and copying from other copy of Windows). So, it seems that problems are inside this installation of Windows, somewhere in its files.

  Read the article

• Centos 6.2 postfix install dependency issues

  - by Mishari

  I am administrating a VPS running cPanel and I'm trying to install postfix. Redhat-release says the version is CentOS release 6.2 (Final) and uname -a says: Linux server.mydomain.com 2.6.32-220.el6.i686 #1 SMP Tue Dec 6 16:15:40 GMT 2011 i686 i686 i386 GNU/Linux This is how I'm installing postfix (I had tried to solve the problem earlier by installing epel). # yum install postfix Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * epel: mirror.cogentco.com Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package postfix.i686 2:2.6.6-2.2.el6_1 will be installed --> Processing Dependency: mysql-libs for package: 2:postfix-2.6.6-2.2.el6_1.i686 --> Finished Dependency Resolution Error: Package: 2:postfix-2.6.6-2.2.el6_1.i686 (centos-burstnet) Requires: mysql-libs You could try using --skip-broken to work around the problem Attempts to install mysql-libs tells me several files conflict with "MySQL-server-5.1.61-0.glibc23.i386" I'm not sure why or how this is happening, does anyone know how to resolve this? Surely Centos 6.2 could not have shipped with a broken postfix.

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

• Java constructor using generic types

  - by user37903

  I'm having a hard time wrapping my head around Java generic types. Here's a simple piece of code that in my mind should work, but I'm obviously doing something wrong. Eclipse reports this error in BreweryList.java: The method initBreweryFromObject() is undefined for the type <T> The idea is to fill a Vector with instances of objects that are a subclass of the Brewery class, so the invocation would be something like: BreweryList breweryList = new BreweryList(BrewerySubClass.class, list); BreweryList.java package com.beerme.test; import java.util.Vector; public class BreweryList<T extends Brewery> extends Vector<T> { public BreweryList(Class<T> c, Object[] j) { super(); for (int i = 0; i < j.length; i++) { T item = c.newInstance(); // initBreweryFromObject() is an instance method // of Brewery, of which <T> is a subclass (right?) c.initBreweryFromObject(); // "The method initBreweryFromObject() is undefined // for the type <T>" } } } Brewery.java package com.beerme.test; public class Brewery { public Brewery() { super(); } protected void breweryMethod() { } } BrewerySubClass.java package com.beerme.test; public class BrewerySubClass extends Brewery { public BrewerySubClass() { super(); } public void androidMethod() { } } I'm sure this is a complete-generics-noob question, but I'm stuck. Thanks for any tips!

  Read the article

• Removing Phantom Registry Entries

  - by shedd

  First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

  Read the article

• Getting windows virtio mounted/installed for KVM

  - by Swifty

  There might be an easy answer to this. I have exhausted my search on google for a solution. Here's my problem. I need to get Windows working on a KVM vps with virtualizor CP. As I get into windows installation in VNC, there's the mandatory driver installation requirement, as HDD is in virtio. There seems to be 2 solutions: 1. Mount the virtio iso (http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/bin/) in the CD drive by unmounting Windows ISO and proceed with driver installation. 2. Create a secondary CD drive and mount the virtio iso there. Well, 1st step never seems to work. If I unload the Windows iso and load the virtio iso, it never reflects back in the VNC. Second step I have yet to be successfull. I try to create a second IDE CD ROM drive via virt-manager but the virtio (virtio-win-0.1-30.iso) iso is never listed in there, whereas i specially placed it in /var/lib/libvirt/images folder. Any suggestions on where I screwed up?

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

• How do I install MySQLdb on a Python 2.6 source build, on Debian Lenny?

  - by nbolton

  I've installed Python 2.6 from source on my Debian Lenny server, as Lenny does not have the python2.6 package. So, my Python 2.5 has MySQLdb installed and working just fine because I installed the python-mysqldb package. I figured I could just install MySQLdb from source, but because I have the Lenny python-dev package, it builds against 2.5: # python setup.py build running build running build_py copying MySQLdb/release.py -> build/lib.linux-x86_64-2.5/MySQLdb running build_ext building '_mysql' extension gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -Dversion_info=(1,2,3,'final',0) -D__version__=1.2.3 -I/usr/include/mysql -I/usr/include/python2.5 -c _mysql.c -o build/temp.linux-x86_64-2.5/_mysql.o -DBIG_JOINS=1 -fPIC gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions build/temp.linux-x86_64-2.5/_mysql.o -L/usr/lib/mysql -lmysqlclient_r -o build/lib.linux-x86_64-2.5/_mysql.so I don't want to run python setup.py install, because I'm afraid it's going to screw up MySQLdb on 2.5 -- should I? I imagine it'd just overwrite 2.5 and do nothing to 2.6 -- maybe there's an argument I can use to install to 2.6? I imagine that I would need also to build against 2.6, so how do I do this?

  Read the article

• Can't install flash on Firefox or Chrome (but works fine on IE...)

  - by WP

  I'm using a work computer (Lenovo) that I recently got from my IT department to replace an old machine. When I installed Firefox and Chrome, I needed to install Adobe Flash. However, the installation has failed on several occasions. I've taken all the usual steps: closing all programs and windows, installing updates and restarting machine, etc, but still the installation does not work. The download manager and status bars say that installation is complete, but I still can't view flash sites on FF or Chrome. Flash is working fine on IE though. Last thing: when I reboot the first dialog box that comes up is from Adobe Download Manager, and it says "Please shut down Internet Explorer before uninstall can complete". I'm confused since a) I've just rebooted so have yet to start IE and b) why UNinstall? My company does not support non-IE browsers so I'm not getting much help from our IT department. If necessary I can post screenshots of error messages and stuff if it comes to that, but hopefully someone will be able to diagnose the problem before that's necessary as I'm not the most tech savvy (despite being a huge fan of reddit...)

  Read the article

• TFS 2010, can I migrate source code only ?

  - by driis

  Our old TFS 2008 installation is getting old, and we would like to migrate to TFS 2010. However, the structure of our team projects is not so well thought out, and there has been various experiments with process templates and editing of work items and so on. Therefore, I would like to migrate our source code to TFS 2010, with full history, and keep all other aspects of the new TFS 2010 installation as clean as possible. How can I do that ?

  Read the article

• unable to login in to phpbb through session of wesite

  - by pramod4u

  With the below code we unable to session ingrate please help us how to integrate is there any modification let give modification. Thank you <?php session_start(); include "conn.php"; include "PHPBB_Login.php"; echo $_SESSION['username']; $data=mysql_query("select * from people where username='".$_SESSION['username']."'"); $data_data=mysql_fetch_array($data); echo $_SESSION['username']; $_SESSION['username']=$data_data['username']; echo $_SESSION['username']; $phpbbq=mysql_query("select user_id from phpbb_users where username='".$data_data['username']."'"); $phpbbr=mysql_fetch_array($phpbbq); //echo $phpbbr['user_id']; $id=$phpbbr['user_id']; $phpbb->login($id ); ?> <? class PHPBB_Login { function PHPBB_Login() { } function login($phpbb_user_id) { $id=$phpbb_user_id ; global $db, $board_config; global $HTTP_COOKIE_VARS, $HTTP_GET_VARS, $SID; // Setup the phpbb environment and then // run through the phpbb login process // You may need to change the following line to reflect // your phpBB installation. require_once('./phpBB-3.0.7-PL1/phpBB3/config.php'); define('IN_PHPBB',true); // You may need to change the following line to reflect // your phpBB installation. $phpbb_root_path = "./phpBB-3.0.7-PL1/phpBB3/"; require_once( $phpbb_root_path . "extension.inc" ); require_once( $phpbb_root_path . "common.php" ); // return session_begin($id,$user_ip, PAGE_INDEX, FALSE, TRUE ); return session_begin($id,$user_ip, PAGE_INDEX, FALSE, $autologin, '0'); } function logout( $session_id, $phpbb_user_id ) { global $db, $lang, $board_config; global $HTTP_COOKIE_VARS, $HTTP_GET_VARS, $SID; // Setup the phpbb environment and then // run through the phpbb login process // You may need to change the following line to reflect // your phpBB installation. require_once( './phpBB-3.0.7-PL1/phpBB3/config.php' ); define('IN_PHPBB',true); // You may need to change the following line to reflect // your phpBB installation. $phpbb_root_path = "./phpBB-3.0.7-PL1/phpBB3/"; require_once( $phpbb_root_path . "extension.inc" ); require_once( $phpbb_root_path . "common.php" ); session_end( $session_id, $phpbb_user_id ); // session_end doesn't seem to get rid of these cookies, // so we'll do it here just in to make certain. setcookie( $board_config[ "cookie_name" ] . "_sid", "", time() - 3600, " " ); setcookie( $board_config[ "cookie_name" ] . "_mysql", "", time() - 3600, " " ); } } ?>

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >