Search Results

Search found 10169 results on 407 pages for 'port'.

Page 237/407 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• Issues configuring CUPS print server for Ubuntu Server 9.10

  - by Tone

  I have a 9.10 Ubuntu Server installed and I want to make it a print server and am trying to get access to the cups browser admin page from a windows client machine. I installed cups: sudo apt-get install cups then I edited the /etc/cups/cupsd.conf file and tried several different listen cominbations: Listen 192.168.1.109:631 #ip my router gives it3 Listen /var/run/cups/cups.sock #already in conf file Listen fileserver:631 #hostname of server Port 631 #listen for all incoming requests on 631? samba is also installed (which I think is necessary to share the printer out? and finally I added my user to the lpadmin group: sudo adduser tone lpadmin but when I try to navigate any of the following I get 403 forbidden http://fileserver:631/admin http://fileserver:631 http://192.168.1.109:631/admin http://192.168.1.109:631 What did I miss?

  Read the article

• SSH Tunneling from Windows to Linux/Ubuntu

  - by Mike

  My question is for my girlfriend basicly.... She works at a mall and doesn't do much so she likes to get on myspace and facebook as most girls do and yahoo to check her email. Well she uses her laptop to connect to a wireless network that doesn't allow it.... so I did some research and got putty and connected to my linux box I have here at home and it worked somewhat. My problem is it only views my webpages I have created here on this box it won't go outside of the linux host. I did it like this in putty... port is 1000 and hostname:80 is what I got outa my research then connected after seting up the tunnel bam worked for all webpages on my box but when she puts in www.myspace.com it redirects to my index.php in my var/www and won't travel outside that as I said.. Any help would be much obliged.

  Read the article

• Red 5, First setup "ssl_error_rx_record_too_long" error message

  - by charles horvath

  I am using Windows 7 and I installed Red 5 0.9.1 just recently. After it installed I put 127.0.0.1 as the IP adress and 5080 as http port. After I start the service in windows I try to connect to the localhost in firefox (http://localhost:5080) and get this error An error occurred during a connection to localhost:5080. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) I checked my global flash settings and allowed localhost to pass along with the Red 5 folder in C/programfiles/red5. I currently have the up to date versions of JDK and JRE also. Any tips on what might be wrong?

  Read the article

• Virtual Sound Card for Windows Server?

  - by Ian Boyd

  i have some software running on a server which requires a sound card to be installed. i'm trying to find a virtual, or emulated, sound card driver for Windows 2000 Server. It doesn't have to play anything, send streams anywhere, or do anything. It just has to be there. Note: This is a physical machine, but i want the solution that will port to a Microsoft Virtual Server machine running Windows 2000 Server. (in other words, buying a sound card will not work) i've already tried the REaudio driver from MixW; it does not work (no sound card virtually appears in the system). Update: 1k views? Obviously people are finding it an interesting question to keep stumbling across it. Up-vote it!

  Read the article

• Deploy to JBoss 7 using Hudson Deploy plugin

  - by Uluk Biy

  I have 2 machines where one of them contains the Hudson CI and other JBoss 7 AS. In Hudson, I have installed "Deploy Plugin", created new job and filled required JBoss manager user connection fields. When I run the job, the project successfully built however the deployment process to remote JBoss AS is not being triggered. No errors or messages about the deployment in log. What should I do? EDIT The deployment is triggered (at least expected) as "Post-build Action" with parameters: [x] Deploy war/ear to a container WAR/EAR files : **/*.war Container : JBoss 7.x Manager user name : test Manager password : * * * * JBoss URL : http://192.168.1.2 JBoss JMX Management port : 9990 It is not a separate job.

  Read the article

• RRAS VPN Server on Windows 2008 Behind NAT

  - by Chris

  Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

  Read the article

• why my zimbra mail servr mail are going into spam flder of yahoo, hotmail etc

  - by sadiq

  hi friends, All mails from my new zimbra mail server are going into spam and junk folder of yahoo or hotmail.... any suggestion to delver them direct into inbox... below is header part of my mail from yahoo... X-Virus-Scanned: amavisd-new at X-Spam-Flag: NO X-Spam-Score: -1.963 X-Spam-Level: X-Spam-Status: No, score=-1.963 tagged_above=-10 required=6.6 tests=[AWL=-0.083, BAYES_00=-2.599, RCVD_IN_SORBS_WEB=0.619, RDNS_NONE=0.1] autolearn=no Received: from mail.sara.co.in ([127.0.0.1]) by localhost (mail.sara.co.in [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id QLBlyaY6ENGi; Fri, 19 Mar 2010 16:52:09 +0530 (IST) Received:from mail.sara.co.in (mail.sara.co.in [192.168.1.1]) by mail.sara.co.in (Postfix) with ESMTP id 0FC6C3538001; Fri, 19 Mar 2010 16:52:08 +0530 (IST) Date: Fri, 19 Mar 2010 16:52:08 +0530 (IST)

  Read the article

• problem connecting to datasource defined in freetds.conf

  - by pkaeding

  I can connect successfully to my database using tsql when I bypass the freetds.conf file, like so: % TDSVER=8.0 tsql -H 10.100.102.202 -p 1086 -U sa After I enter my password, I am presented with a 1> prompt, and it is ready for my commands. However, if I try to connect using the definition in my freetds.conf file, like this: % tsql -S Millie -U sa after entering my password, it seems to be trying to generate a prompt, but it just keeps counting. I will see 1, followed by 2, etc, without ever displaying a > character. Here is what I have for my freetds.conf: [global] # TDS protocol version tds version = 8.0 text size = 64512 [Millie] host = 10.100.102.202 port = 1086 What could be causing this anomaly? If it helps, here is the output of tsql -C: % tsql -C Compile-time settings (established with the "configure" script) Version: freetds v0.82 freetds.conf directory: /usr/local/etc MS db-lib source compatibility: no Sybase binary compatibility: no Thread safety: yes iconv library: yes TDS version: 5.0 iODBC: no unixodbc: no

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Resolving “ssl handshake failure” error in PostgresQL

  - by Mitch

  I would like to connect to my Postgres 8.3 database using SSL from my XP client using OpenSSL. This works fine without SSL. When I try it with SSL (no client certificate), I get the error: error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure I have followed the instructions in the Postgres manual for SSL including creating a self-signed certificate. In my pg_hba.conf there is a line: host dbname loginname 123.45.67.89/32 md5 The version of OpenSSL on the server is 0.9.8g and on the client is 0.9.8j. I'd appreciate any suggestions for tracking down the problem. Edit: The uncommented lines from postgresql.conf are: data_directory = '/var/ebs0/postgres/main' hba_file = '/etc/postgresql/8.3/main/pg_hba.conf' ident_file = '/etc/postgresql/8.3/main/pg_ident.conf' external_pid_file = '/var/run/postgresql/8.3-main.pid' listen_addresses = '*' port = 5432 max_connections = 100 unix_socket_directory = '/var/run/postgresql' ssl = true shared_buffers = 24MB

  Read the article

• Ubuntu 11.10, using wget/curl fails with ssl

  - by Greg Spiers

  Note: See edit 3 for solution On a completely new install of Ubuntu I'm getting the following errors when using wget: wget https://test.sagepay.com --2012-03-27 12:55:12-- https://test.sagepay.com/ Resolving test.sagepay.com... 195.170.169.8 Connecting to test.sagepay.com|195.170.169.8|:443... connected. ERROR: cannot verify test.sagepay.com's certificate, issued by `/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA': Unable to locally verify the issuer's authority. To connect to test.sagepay.com insecurely, use `--no-check-certificate'. I've tried installing ca-certificates and configuring the ca-certs and they appear to all be setup in /etc/ssl/certs. The same issue exists for cURL: curl https://test.sagepay.com curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed Which leads me to believe it's something wrong with openssl server wide. wget and curl both work correctly locally on OSX and I have confirmed with a few people that it's working on their servers so I suspect it's nothing to do with the server I'm attempting to connect to. Any ideas or suggestions on things to try to narrow it down? Thank you Edit As requested verbose output from curl curl -Iv https://test.sagepay.com * About to connect() to test.sagepay.com port 443 (#0) * Trying 195.170.169.8... connected * Connected to test.sagepay.com (195.170.169.8) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html Edit 2 Using the hash from your comment I see this: ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al 7651b327.0 lrwxrwxrwx 1 root root 59 2012-03-27 12:48 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority.pem ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al Verisign_Class_3_Public_Primary_Certification_Authority.pem lrwxrwxrwx 1 root root 94 2012-01-18 07:21 Verisign_Class_3_Public_Primary_Certification_Authority.pem -> /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ ls -al /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -rw-r--r-- 1 root root 834 2011-09-28 14:53 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt ubuntu@srv-tf6sq:/etc/ssl/certs$ more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- But doing the steps myself I end up with a different hash: strace -o /tmp/foo.out curl -Iv https://test.sagepay.com and grep ssl /tmp/foo.out open("/lib/x86_64-linux-gnu/libssl.so.1.0.0", O_RDONLY) = 3 stat("/etc/ssl/certs/415660c1.0", {st_mode=S_IFREG|0644, st_size=834, ...}) = 0 open("/etc/ssl/certs/415660c1.0", O_RDONLY) = 4 stat("/etc/ssl/certs/415660c1.1", 0x7fff7dab07b0) = -1 ENOENT (No such file or directory) readlink -f /etc/ssl/certs/415660c1.0 /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt more /usr/share/ca-certificates/mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt -----BEGIN CERTIFICATE----- MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2 MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i 2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ 2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ -----END CERTIFICATE----- Any other ideas? Thank you for the help so far :) Edit 3 So it turns out that installing the ca-certificates package didn't install the one that I needed. I found this post about certificates being presented out of order. This seems to be the case with my request to sagepay. The solution ended up being to install another CA certificate from Verisign. I'm not sure why this fixes the issue with it being out of order but it does, but I suspect the out of order issue really isn't a problem at all and it was infact because I was missing a certificate all along. The additional certificate is available in that post but I didn't want to blindly trust it. I've looked at the list of CA certificates from cURL's site and it is listed there so I do trust it. The certificate: Verisign Class 3 Public Primary Certification Authority ======================================================= -----BEGIN CERTIFICATE----- MIICPDCCAaUCEHC65B0Q2Sk0tjjKewPMur8wDQYJKoZIhvcNAQECBQAwXzELMAkGA1UEBhMCVVMx FzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmltYXJ5 IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVow XzELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAz IFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUA A4GNADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhEBarsAx94 f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/isI19wKTakyYbnsZogy1Ol hec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0GCSqGSIb3DQEBAgUAA4GBALtMEivPLCYA TxQT3ab7/AoRhIzzKBxnki98tsX63/Dolbwdj2wsqFHMc9ikwFPwTtYmwHYBV4GSXiHx0bH/59Ah WM1pF+NEHJwZRDmJXNycAA9WjQKZ7aKQRUzkuxCkPfAyAw7xzvjoyVGM5mKf5p/AfbdynMk2Omuf Tqj/ZA1k -----END CERTIFICATE----- I put this in a file in: /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt I then modified the /etc/ca-certificates.conf and added the following line at the end: curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt After that I ran the command: sudo update-ca-certificates Looking into the /etc/ssl/certs directory I see it correctly linked: ls -al | grep cURL lrwxrwxrwx 1 root root 69 2012-03-27 16:03 415660c1.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 69 2012-03-27 16:03 7651b327.0 -> Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem lrwxrwxrwx 1 root root 101 2012-03-27 16:03 Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.pem -> /usr/share/ca-certificates/curl/Verisign_Class_3_Public_Primary_Certification_Authority-from_cURL.crt And everything works! curl -I https://test.sagepay.com HTTP/1.1 200 OK...

  Read the article

• Deluge through a socks proxy server

  - by tapan

  To use deluge I use a socks proxy server. Everything was working perfectly till now. I use the following code to create the socks server: ssh -D 1080 user@remote-server In the proxy settings of Deluge I put the host as 127.0.0.1 and port as 1080 and use socks v4 (for some reason it didn't work with socks v5). This setup was working perfectly till now. Now suddenly I cannot download any torrents. The error I get is connection timed out. I checked the remote server and it seems it is not even being used. What can the error be ?

  Read the article

• WAN interface responds as LAN when request comes from LAN, is that correct?

  - by Eugenio Miró

  Hi Everyone! I have a problem with my router/modem. I've published an HTTP service from one of my internal computers and when I access the service from the internal lan using the external IP address the modem responds instead of redirecting the call to the forwarded port. I can access the service from outside however, but from the internal network the modem responds to my calls. I'm using a ZTE ZXDSL 831 Series modem with ZXDSL 831IIV7.5.1e_E09_BR1 firmware. Thanks in advance!

  Read the article

• Unknown protocol when trying to connect to remote host wit stunnel

  - by RaYell

  I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

  Read the article

• GlassFish will not start when SNMP is enabled

  - by edarc

  I have a GlassFish v3 app server running on 64-bit Debian Lenny. Everything is running fine, except I would like to monitor GF's JVM instance with SNMP. However, every time I try to enable it by adding the following <jvm-options> in domain.xml: -Dcom.sun.management.snmp.port=10161 -Dcom.sun.management.snmp.acl.file=/path/to/snmp.acl -Dcom.sun.management.snmp.interface=127.0.0.1 GlassFish refuses to start: $ asadmin start-domain Waiting for DAS to start .Error starting domain: default. The server exited prematurely with exit code 1. Command start-domain failed. $ There is also nothing illuminating (well, really nothing at all) in jvm.log or server.log. The snmp.acl file contains: acl = { { communities = public access = read-only managers = localhost } } and is chmod 600 (I know this is not the problem because it will actually fail with an error about the permissions if it is set to anything other than 600) $ java -version java version "1.6.0_0" OpenJDK Runtime Environment (build 1.6.0_0-b11) OpenJDK 64-Bit Server VM (build 1.6.0_0-b11, mixed mode)

  Read the article

• Windows SBS 2003 DNS taking over network

  - by Simon

  I have Windows Small Business Server 2003 premium edition on my new server box, this hosts a webapp on IIS. It has set up a DNS Server to solve requests to the webapp. I have a linux server/router that has does DNAT and portforwards port 80 to the new box. My linux router serves as a firewall and dhcp When i plug the SBS2003 server to the network, it leaves everyone on my network without web browsing, it looks like the DNS requests are going to the new server. I configured the DNS forwarders on SBS2003 to my ISP dns but it doesnt work... Is there something i am missing?

  Read the article

• What happens when a consumer switch receives a VLAN-tagged Ethernet frame?

  - by netvope

  Suppose you connect a trunk port from a VLAN capable network switch to a (VLAN incapable) consumer-grade network switch via a direct cable. Now the former switch send the later switch a 802.1Q-tagged Ethernet frame. What should the later switch do? Drop the frame? Forward the frame? Undefined behavior? If the behavior is undefined, what is most probable? Edit: Thank you for your answers. To summarize, the behavior of the consumer switch depends on: How it handles frames with 0x8100 in the EtherType field1 How it handles jumbo frames, or frames with payload larger than 1500 bytes Wikipedia has a nice diagram comparing an untagged and a tagged Ethernet frame: There are reports that some consumer-grade switches pass VLAN-tagged frames just fine. 1 or more precisely, where an EtherType field is expected for non-tagged frames

  Read the article

• diagnostic multicast issue using wireshark

  - by Abruzzo Forte e Gentile

  I have a network that is setup for multicast traffic. My setup is the following -Machine A : a server generates multicast traffic. -Machine A : few clients subscribing to that multicast traffic -Machine B : few clients subscribing to that multicast traffic # Address I am using IP : 239.193.0.21 PORT: 20401 The clients in machine A , even if they join the group (I can see IGMP messages through wireshark), don't receive any data while (and this is the funny part) machine B,C and D receive everything. I sorted that issue by completely disabling Linux firewall. Before doing that, I enabled the multicast on the firwall ('reject all'). iptables -A INPUT -m addrtype --src-type MULTICAST -j ACCEPT My question is the following: what I can check in wireshark that can help me in spot such firewall issues in the futures? For TCP/IP I realize by using ping and looking at ICMP packets rejected. What I can check/monitor for multicast? I am using LInux/Red-Hat Enterprise 6.2

  Read the article

• PAM_LDAP error trying to bind ?

  - by billyduc

  I have this error when I ssh to my LDAP client using the login name on the LDAP server my LDAP client's running Ubuntu 9.10 Karmic my LDAP server is Fedora Core 4 and running Fedora Directory Server ssh [email protected] cat /var/log/auth.log //on the client Dec 18 10:24:17 ubuntu-ltsp sshd[4527]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=billyhost.local user=billyduc Dec 18 10:24:17 ubuntu-ltsp sshd[4527]: pam_ldap: error trying to bind as user "uid=billyduc,dc=mydomain,dc=com" (Invalid credentials) Dec 18 10:24:18 ubuntu-ltsp sshd[4527]: Failed password for billyduc from 192.168.5.121 port 51449 ssh2 Here's my /etc/pam.d/sshd cat /etc/pam.d/sshd auth [success=1 default=ignore] pam_unix.so auth required pam_ldap.so use_first_pass auth required pam_permit.so account sufficient pam_permit.so I also edit my /etc/ssh/sshd_config in both client and Server PasswordAuthentication yes So I think something wrong with the password when the ssh server do checking

  Read the article

• Tomcat 6 HTTPS connector: keep alive timeout not being respected

  - by sehugg

  I'm using Tomcat 6.0.24 on Ubuntu (JDK 1.6) with an app that does Comet-style requests on an HTTPS connector (directly against Tomcat, not using APR). I'd like to set the keep-alive to 5 minutes so I don't have to refresh my long-polling connections. Here is my config: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="1000" keepAliveTimeout="330000" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> Unfortunately it seems that the server closes the connection after 65 seconds. The pcap from a sample session goes something like this: T=0 Client sends SYN to server, handshake etc. T=65 Server sends FIN to client T=307 Client sends FIN to server (I'm guessing the 5 minute timeout on the client is due to the HTTP lib not detecting the socket close on the server end, but in any case -- the server shouldn't be closing the connection that early) (edit: this works as expected when using the standard HTTP connector)

  Read the article

• A Firefox extension for scan & upload document?

  - by Ivan Petrushev

  Hello, Do you know such an extension that provides easy document scanning in Firefox? We are building a web site and we want visitors to be able to upload scanned documents to it. The normal procedure for that is: Scan the document via Gimp, Photoshop or some other scanning software. Save the file. Navigate to the upload web page. Find some sort of HTML input type file on that page. Browse and find the saved file. Submit the form. I want an extension or plugin that automatize that process and do everything with 1 click - scan the document with some default settings (for example "grayscale, 300 dpi") creates temporary file, fills the page input field and deletes the temporary file after upload. I tried lots of googling but the term scan in combination with everything web-related gives zillions of virus, malware and port scanners...

  Read the article

• Mechanical mouse using USB-to-PS/2 Adapter freezes occasionally

  - by izn

  I am using an AOpen PS/2 mechanical mouse in Ubuntu 11.10 with a Staples USB-to-PS/2 Adapter with my Intel DP67DE motherboard. The mouse is more comfortable for my hand as it has a lower height than optical mouses. Occasionally the mouse cursor freezes and often I have to unplug it from the USB port and plug it back in to unfreeze it. This happens with all the USB ports. I've been using the adapter for a few weeks now and this seems to be happening more often recently. What might be happening and is there anything that can be done to fix this?

  Read the article

• Setting up Zend Framework 2 on GoDaddy

  - by Yossi

  I tried setting up ZF2 on the GoDaddy shared servers, though it doesn't work. I tried to download it directly, and using the git composer (which I managed to install successfully on the server). The error I'm receiving from PHP is this: Warning: Unexpected character in input: '\' (ASCII=92) state=1 in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 Parse error: syntax error, unexpected T_STRING in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 The PHP version the account is running: PHP 5.3.13 (cli) (built: May 14 2012 16:26 The Linux server that is used is: Linux ...secureserver.net ... #1 SMP Fri Jul 15 08:15:44 EDT 2011 i686 i686 i386 GNU/Linux CentOS release 5.5 (Final) Any ideas what I'm doing wrong? I never worked with ZF1, and I know there are custom solution out there for ZF1, but I didn't manage to port them into ZF2.

  Read the article

• Using the Juniper EX3300 Switch as a router?

  - by Richard Whitman

  I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the same VLAN as ge-0/1/0 can access the Internet. I have done some research, and I haven't gotten anywhere really. I have configured the interface as follows: ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family inet { address xx.xx.xx.xx/32; } } } where xx.xx.xx.xx is the "Customer Router Port IP" assigned by my ISP. When I try to commit, I get the following error: Interface ge-0/1/0.0 not enabled for switching Can some one tell me what is the right way to configure it?

  Read the article

• SSH: Tunnel multiple ports to remote server

  - by user1594322

  See attached diagram. Host A - Windows server Host B - Linux server Host C - VMWare ESXi server From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway. Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A. What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >