full screen mode - Page 238

Dual monitor not working after an update

- by Nimonika

I did a package manager update yesterday and it turns out that my dual monitor setup has stopped working. I have poor vision so I really need to connect to a much bigger screen, but since yesterday, when I connect the screen to my laptop, the screen does not automatically reset itself to the laptop display. Even after lots of trial and error with the display settings, I am getting different dispalys on the laptop and external screen and right now only the big screen is active while the laptop has blanked out. Please can someone help me setup my dual screens for 11.10 properly. lspci -v | grep -i vga output 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]

Read the article

How do I apply an arcball (using quaternions) along with mouse events, to allow the user to look around the screen using the o3d webgl framework?

- by Chris

How do I apply an arcball (using quaternions) along with mouse events, to allow the user to look around the screen using the o3d webgl framework? This sample (http://code.google.com/p/o3d/source/browse/trunk/samples_webgl/o3d-webgl-samples/simpleviewer/simpleviewer.html?r=215) uses the arcball for rotating the transform of an "object", but rather than apply this to a transform, I would like to apply the rotation to the camera's target, to create a first person style ability to look around the scene, as if the camera is inside the centre of the arcball instead of rotating from the outside. The code that is used in this sample is var rotationQuat = g_aball.drag([e.x, e.y]); var rot_mat = g_quaternions.quaternionToRotation(rotationQuat); g_thisRot = g_math.matrix4.mul(g_lastRot, rot_mat); The code that I am using which doesn't work var rotationQuat = g_aball.drag([e.x, e.y]); var rot_mat = g_quaternions.quaternionToRotation(rotationQuat); g_thisRot = g_math.matrix4.mul(g_lastRot, rot_mat); var cameraRotationMatrix4 = g_math.matrix4.lookAt(g_eye, g_target, [g_up[0], g_up[1] * -1, g_up[2]]); var cameraRotation = g_math.matrix4.setUpper3x3(cameraRotationMatrix4,g_thisRot); g_target = g_math.addVector(cameraRotation, g_target); where am I going wrong? Thanks

Read the article

In Wireshark's Protocol Hierarchy Statistics screen, is the total byte count of a capture the sum of the Bytes column or just the top line (Frame)?

- by Howiecamp

Part 1 - I'm looking at Wireshark's Protocol Hierarchy Statistics screen (sample below), is the total byte count of the capture the sum of the Bytes column or just the top line (Frame)? I'm 99% that it's the latter because of protocol rollup but I wanted to conform. Part 2 - From Wireshark documentation on this screen, "Protocol layers can consist of packets that won't contain any higher layer protocol, so the sum of all higher layer packets may not sum up to the protocols packet count. Example: In the screenshot TCP has 85,83% but the sum of the subprotocols (HTTP, ...) is much less. This may be caused by TCP protocol overhead, e.g. TCP ACK packets won't be counted as packets of the higher layer)." Can you explain this?

Read the article

facebook connect for android returns a blank login screen?

- by jonney

Hi, i am trying to use the old facebook connect authentication to authenticate my android client to get the necessary session id's and other credentials thats needed to start using the web service of facebook. the issue i am having is that when my android application launces and tries to load the login page for facebook, that very same login page is blank and it only displays the the facebook logo as the title of the screen. No login fields or buttons are visible leaving me nowhere to login and authenticate a user. i have tried two API's one is facebook connect api for android http://code.google.com/p/fbconnect-android/ and the other one is the official android facebook sdk that is recommended to be used instead of the previous one i have just mentioned https://github.com/facebook/facebook-android-sdk/ . please see the image below of how it looks like on my app. Here is code that uses the latest android sdk facebook: /** * Authenticate facebook network */ private void authenticateFacebook() { // TODO: move this away from this activty class into some kind of // helper/wrapper class Log.d(TAG, "Clicked on the facebook"); Facebook facebook = new Facebook(OAUTH_KEY_FACEBOOK_API); facebook.authorize(this, new AuthorizeListener()); } class AuthorizeListener implements DialogListener{ @Override public void onComplete(Bundle values) { // TODO Auto-generated method stub Log.d(TAG, "finished authorizing facebook user"); } @Override public void onFacebookError(FacebookError e) { // TODO Auto-generated method stub } @Override public void onError(DialogError e) { // TODO Auto-generated method stub } @Override public void onCancel() { // TODO Auto-generated method stub } } And a simple example of how to use it: http://developers.facebook.com/docs/guides/mobile/ My code is more or less identical to the above example. edit: i did not catch what logcat was inputing in my first attempted at my code above but their was no exceptions or warnings thrown at the time. just a blank page. i then tried it again and diddnt touch my code and what happens now is that a loading dialogue view pops up and stays their for a few minutes until the facebook windows disapears and the logcat outputs the error below: 11-18 17:26:19.913: DEBUG/Facebook-WebView(783): Webview loading URL: https://www.facebook.com/dialog/oauth?type=user_agent&redirect_uri=fbconnect%3A%2F%2Fsuccess&display=touch&client_id=e??????????????????? 11-18 17:27:01.756: DEBUG/Facebook-authorize(783): Login failed: com.kc.unity.agent.util.oauth.facebook.DialogError: The connection to the server was unsuccessful. 11-18 17:27:01.783: DEBUG/Facebook-WebView(783): Webview loading URL: https://www.facebook.com/dialog/oauth?type=user_agent&redirect_uri=fbconnect%3A%2F%2Fsuccess&display=touch&client_id=??????????????? please note that the client id i have amended for obvious reasons but the rest of the logcat is untouched

Read the article

How can I scroll my custom view? I want to see the shapes drawn over the bounds of the screen

- by antonio Musella

I have a Custom view ... package nan.salsa.goal.customview; import android.R; import android.content.Context; import android.graphics.Canvas; import android.graphics.drawable.ShapeDrawable; import android.graphics.drawable.shapes.RectShape; import android.util.AttributeSet; import android.util.Log; import android.view.View; public class DayView extends View { private static String TAG="DayView"; private ShapeDrawable mDrawable; public DayView(Context context) { super(context); } public DayView(Context context, AttributeSet attrs) { super(context, attrs); init(); } public DayView(Context context, AttributeSet attrs, int defStyle) { super(context, attrs, defStyle); init(); } public void init() { int x = 10; int y = 10; mDrawable = new ShapeDrawable(new RectShape()); mDrawable.getPaint().setColor(Color.GREEN); mDrawable.setBounds(x, y, x + (width - (x * 2)), y + (height - (y*2))); mDrawable.draw(canvas); for (int i = 1; i < 30; i++) { boxDrawable = new ShapeDrawable(new RectShape()); boxDrawable.setBounds(x + x , y + (100 * i) , x + (width - ((x + x) * 2)), y + (100 * i) + 50); boxDrawable.getPaint().setColor(Color.RED); boxDrawable.draw(canvas); } } @Override protected void onDraw(Canvas canvas) { // TODO Auto-generated method stub super.onDraw(canvas); setBackgroundColor(R.color.black); mDrawable.draw(canvas); } } with this simple configuration file : <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="#E06F00"> <nan.salsa.goal.customview.DayView android:id="@+id/dayView" android:layout_height="match_parent" android:layout_width="fill_parent" /> </LinearLayout> In my view I want to scroll to see the shapes drawn over the bounds of the screen .. How I can do it? Regards, Antonio Musella

Read the article

How do I Print a dynamically created Flex component/chart that is not being displayed on the screen?

- by Adam Jones

I have a several chart components that I have created in Flex. Basically I have set up a special UI that allows the user to select which of these charts they want to print. When they press the print button each of the selected charts is created dynamically then added to a container. Then I send this container off to FlexPrintJob. i.e. private function prePrint():void { var printSelection:Box = new Box(); printSelection.percentHeight = 100; printSelection.percentWidth = 100; printSelection.visible = true; if (this.chkMyChart1.selected) { var rptMyChart1:Chart1Panel = new Chart1Panel(); rptMyChart1.percentHeight = 100; rptMyChart1.percentWidth = 100; rptMyChart1.visible = true; printSelection.addChild(rptMyChart1); } print(printSelection); } private function print(container:Box):void { var job:FlexPrintJob; job = new FlexPrintJob(); if (job.start()) { job.addObject(container, FlexPrintJobScaleType.MATCH_WIDTH); job.send(); } } This code works fine if the chart is actually displayed somewhere on the page but adding it dynamically as shown above does not. The print dialog will appear but nothing happens when I press OK. So I really have two questions: Is it possible to print flex components/charts when they are not visible on the screen? If so, how do I do it / what am I doing wrong? UPDATE: Well, at least one thing wrong is my use of the percentages in the width and height. Using percentages doesn't really make sense when the Box is not contained in another object. Changing the height and width to fixed values actually allows the printing to progress and solves my initial problem. printSelection.height = 100; printSelection.width = 100; But a new problem arises in that instead of seeing my chart, I see a black box instead. I have previously resolved this issue by setting the background colour of the chart to #FFFFFF but this doesn't seem to be working this time. UPDATE 2: I have seen some examples on the adobe site that add the container to the application but don't include it in the layout. This looks like the way to go. i.e. printSelection.includeInLayout = false; addChild(printSelection);

Read the article

SDL_BlitSurface() not displaying image?

- by Christian Gonzalez

So I'm trying to display a simply image with the SDL library, but when I use the function SDL_BlitSurface() nothing happens, and all I get is a black screen. I should also note that I have the .bmp file, the source, and the executable file all in the same directory. //SDL Header #include "SDL/SDL.h" int main(int argc, char* args[]) { //Starts SDL SDL_Init(SDL_INIT_EVERYTHING); //SDL Surfaces are images that are going to be displayed. SDL_Surface* Hello = NULL; SDL_Surface* Screen = NULL; //Sets the size of the window (Length, Height, Color(bits), Sets the Surface in Software Memory) Screen = SDL_SetVideoMode(640, 480, 32, SDL_SWSURFACE); //Loads a .bmp image Hello = SDL_LoadBMP("Hello.bmp"); //Applies the loaded image to the screen SDL_BlitSurface(Hello, NULL, Screen, NULL); //Update Screen SDL_Flip(Screen); //Pause SDL_Delay(2000); //Deletes the loaded image from memory SDL_FreeSurface(Hello); //Quits SDL SDL_Quit(); return 0; }

Read the article

How to release my view from stack ?

- by aman-gupta

Hi, In my application I m using following coding convention to open my default screen :-- AppDelegate *ptrDefaultScreen = (AppDelegate *)[[UIApplication sharedApplication]delegate]; [self.navigationController presentModalViewController:ptrDefaultScreen.FrmFlashScreenLink animated:YES]; but when I move to other screen after default screen ,my default screen is still exists even i used [self dismissModelViewController:YES]; to dimiss default screen from view. where I m wrong I want my default screen will be completely removed from view. Is any other way to call default screen before actual application. Please help me out.Thanks in advance

Read the article

Why Is Vertical Resolution Monitor Resolution so Often a Multiple of 360?

- by Jason Fitzpatrick

Stare at a list of monitor resolutions long enough and you might notice a pattern: many of the vertical resolutions, especially those of gaming or multimedia displays, are multiples of 360 (720, 1080, 1440, etc.) But why exactly is this the case? Is it arbitrary or is there something more at work? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Trojandestroy recently noticed something about his display interface and needs answers: YouTube recently added 1440p functionality, and for the first time I realized that all (most?) vertical resolutions are multiples of 360. Is this just because the smallest common resolution is 480×360, and it’s convenient to use multiples? (Not doubting that multiples are convenient.) And/or was that the first viewable/conveniently sized resolution, so hardware (TVs, monitors, etc) grew with 360 in mind? Taking it further, why not have a square resolution? Or something else unusual? (Assuming it’s usual enough that it’s viewable). Is it merely a pleasing-the-eye situation? So why have the display be a multiple of 360? The Answer SuperUser contributor User26129 offers us not just an answer as to why the numerical pattern exists but a history of screen design in the process: Alright, there are a couple of questions and a lot of factors here. Resolutions are a really interesting field of psychooptics meeting marketing. First of all, why are the vertical resolutions on youtube multiples of 360. This is of course just arbitrary, there is no real reason this is the case. The reason is that resolution here is not the limiting factor for Youtube videos – bandwidth is. Youtube has to re-encode every video that is uploaded a couple of times, and tries to use as little re-encoding formats/bitrates/resolutions as possible to cover all the different use cases. For low-res mobile devices they have 360×240, for higher res mobile there’s 480p, and for the computer crowd there is 360p for 2xISDN/multiuser landlines, 720p for DSL and 1080p for higher speed internet. For a while there were some other codecs than h.264, but these are slowly being phased out with h.264 having essentially ‘won’ the format war and all computers being outfitted with hardware codecs for this. Now, there is some interesting psychooptics going on as well. As I said: resolution isn’t everything. 720p with really strong compression can and will look worse than 240p at a very high bitrate. But on the other side of the spectrum: throwing more bits at a certain resolution doesn’t magically make it better beyond some point. There is an optimum here, which of course depends on both resolution and codec. In general: the optimal bitrate is actually proportional to the resolution. So the next question is: what kind of resolution steps make sense? Apparently, people need about a 2x increase in resolution to really see (and prefer) a marked difference. Anything less than that and many people will simply not bother with the higher bitrates, they’d rather use their bandwidth for other stuff. This has been researched quite a long time ago and is the big reason why we went from 720×576 (415kpix) to 1280×720 (922kpix), and then again from 1280×720 to 1920×1080 (2MP). Stuff in between is not a viable optimization target. And again, 1440P is about 3.7MP, another ~2x increase over HD. You will see a difference there. 4K is the next step after that. Next up is that magical number of 360 vertical pixels. Actually, the magic number is 120 or 128. All resolutions are some kind of multiple of 120 pixels nowadays, back in the day they used to be multiples of 128. This is something that just grew out of LCD panel industry. LCD panels use what are called line drivers, little chips that sit on the sides of your LCD screen that control how bright each subpixel is. Because historically, for reasons I don’t really know for sure, probably memory constraints, these multiple-of-128 or multiple-of-120 resolutions already existed, the industry standard line drivers became drivers with 360 line outputs (1 per subpixel). If you would tear down your 1920×1080 screen, I would be putting money on there being 16 line drivers on the top/bottom and 9 on one of the sides. Oh hey, that’s 16:9. Guess how obvious that resolution choice was back when 16:9 was ‘invented’. Then there’s the issue of aspect ratio. This is really a completely different field of psychology, but it boils down to: historically, people have believed and measured that we have a sort of wide-screen view of the world. Naturally, people believed that the most natural representation of data on a screen would be in a wide-screen view, and this is where the great anamorphic revolution of the ’60s came from when films were shot in ever wider aspect ratios. Since then, this kind of knowledge has been refined and mostly debunked. Yes, we do have a wide-angle view, but the area where we can actually see sharply – the center of our vision – is fairly round. Slightly elliptical and squashed, but not really more than about 4:3 or 3:2. So for detailed viewing, for instance for reading text on a screen, you can utilize most of your detail vision by employing an almost-square screen, a bit like the screens up to the mid-2000s. However, again this is not how marketing took it. Computers in ye olden days were used mostly for productivity and detailed work, but as they commoditized and as the computer as media consumption device evolved, people didn’t necessarily use their computer for work most of the time. They used it to watch media content: movies, television series and photos. And for that kind of viewing, you get the most ‘immersion factor’ if the screen fills as much of your vision (including your peripheral vision) as possible. Which means widescreen. But there’s more marketing still. When detail work was still an important factor, people cared about resolution. As many pixels as possible on the screen. SGI was selling almost-4K CRTs! The most optimal way to get the maximum amount of pixels out of a glass substrate is to cut it as square as possible. 1:1 or 4:3 screens have the most pixels per diagonal inch. But with displays becoming more consumery, inch-size became more important, not amount of pixels. And this is a completely different optimization target. To get the most diagonal inches out of a substrate, you want to make the screen as wide as possible. First we got 16:10, then 16:9 and there have been moderately successful panel manufacturers making 22:9 and 2:1 screens (like Philips). Even though pixel density and absolute resolution went down for a couple of years, inch-sizes went up and that’s what sold. Why buy a 19″ 1280×1024 when you can buy a 21″ 1366×768? Eh… I think that about covers all the major aspects here. There’s more of course; bandwidth limits of HDMI, DVI, DP and of course VGA played a role, and if you go back to the pre-2000s, graphics memory, in-computer bandwdith and simply the limits of commercially available RAMDACs played an important role. But for today’s considerations, this is about all you need to know. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

Read the article

Displaylink USB show "Logo / Loading" on monitor

- by Ken Le

I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

Read the article

Same SELECT used in an INSERT has different execution plan

- by amacias

A customer complained that a query and its INSERT counterpart had different execution plans, and of course, the INSERT was slower. First lets look at the SELECT : SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid FROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLS WHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode; The query has 2 DISTINCT subqueries. The execution plan shows one with DISTICT Placement transformation applied and not the other. The view in Step 5 has the prefix VW_DTP which means DISTINCT Placement. -------------------------------------------------------------------- | Id | Operation | Name | Cost (%CPU) -------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 272K(100) |* 1 | HASH JOIN OUTER | | 272K (1) | 2 | VIEW | | 4408 (1) | 3 | HASH UNIQUE | | 4408 (1) |* 4 | HASH JOIN | | 4407 (1) | 5 | VIEW | VW_DTP_48BAF62C | 1660 (2) | 6 | HASH UNIQUE | | 1660 (2) | 7 | TABLE ACCESS FULL | DL | 1644 (1) | 8 | TABLE ACCESS FULL | T | 2744 (1) | 9 | VIEW | | 267K (1) | 10 | HASH UNIQUE | | 267K (1) |* 11 | HASH JOIN | | 267K (1) | 12 | PARTITION RANGE ITERATOR| | 266K (1) |* 13 | TABLE ACCESS FULL | CH | 266K (1) | 14 | TABLE ACCESS FULL | DL | 1644 (1) -------------------------------------------------------------------- Query Block Name / Object Alias (identified by operation id): ------------------------------------------------------------- 1 - SEL$1 2 - SEL$AF418D5F / TRT_CELLS@SEL$1 3 - SEL$AF418D5F 5 - SEL$F6AECEDE / VW_DTP_48BAF62C@SEL$48BAF62C 6 - SEL$F6AECEDE 7 - SEL$F6AECEDE / DL@SEL$3 8 - SEL$AF418D5F / T@SEL$3 9 - SEL$2 / CH_CELLS@SEL$1 10 - SEL$2 13 - SEL$2 / CH@SEL$2 14 - SEL$2 / DL@SEL$2 Predicate Information (identified by operation id): --------------------------------------------------- 1 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 4 - access("T"."TREATMENTCODE"="ITEM_1") 11 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 13 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5) The outline shows PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") indicating that the QB3 is the one that got the transformation. Outline Data ------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$F6AECEDE") OUTLINE_LEAF(@"SEL$AF418D5F") PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE(@"SEL$48BAF62C") OUTLINE(@"SEL$3") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") NO_ACCESS(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C") FULL(@"SEL$AF418D5F" "T"@"SEL$3") LEADING(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C" "T"@"SEL$3") USE_HASH(@"SEL$AF418D5F" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$AF418D5F") FULL(@"SEL$F6AECEDE" "DL"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$F6AECEDE") END_OUTLINE_DATA */ The 10053 shows there is a comparative of cost with and without the transformation. This means the transformation belongs to Cost-Based Query Transformations (CBQT). In SEL$3 the optimization of the query block without the transformation is 6659.73 and with the transformation is 4408.41 so the transformation is kept. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#3) DP: Checking validity of distinct placement for query block SEL$3 (#3) DP: Using search type: linear DP: Considering distinct placement on query block SEL$3 (#3) DP: Starting iteration 1, state space = (5) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 6659.73 DP: Starting iteration 2, state space = (5) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Updated best state, Cost = 4408.41 DP: Doing DP on the original QB. DP: Doing DP on the preserved QB. In SEL$2 the cost without the transformation is less than with it so it is not kept. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#2) DP: Checking validity of distinct placement for query block SEL$2 (#2) DP: Using search type: linear DP: Considering distinct placement on query block SEL$2 (#2) DP: Starting iteration 1, state space = (3) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 267936.93 DP: Starting iteration 2, state space = (3) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Not update best state, Cost = 267951.66 To the same query an INSERT INTO is added and the result is a very different execution plan. INSERT INTO cc (ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid)SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellidFROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLSWHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode;----------------------------------------------------------| Id | Operation | Name | Cost (%CPU)----------------------------------------------------------| 0 | INSERT STATEMENT | | 274K(100)| 1 | LOAD TABLE CONVENTIONAL | | |* 2 | HASH JOIN OUTER | | 274K (1)| 3 | VIEW | | 6660 (1)| 4 | SORT UNIQUE | | 6660 (1)|* 5 | HASH JOIN | | 6659 (1)| 6 | TABLE ACCESS FULL | DL | 1644 (1)| 7 | TABLE ACCESS FULL | T | 2744 (1)| 8 | VIEW | | 267K (1)| 9 | SORT UNIQUE | | 267K (1)|* 10 | HASH JOIN | | 267K (1)| 11 | PARTITION RANGE ITERATOR| | 266K (1)|* 12 | TABLE ACCESS FULL | CH | 266K (1)| 13 | TABLE ACCESS FULL | DL | 1644 (1)----------------------------------------------------------Query Block Name / Object Alias (identified by operation id):------------------------------------------------------------- 1 - SEL$1 3 - SEL$3 / TRT_CELLS@SEL$1 4 - SEL$3 6 - SEL$3 / DL@SEL$3 7 - SEL$3 / T@SEL$3 8 - SEL$2 / CH_CELLS@SEL$1 9 - SEL$2 12 - SEL$2 / CH@SEL$2 13 - SEL$2 / DL@SEL$2Predicate Information (identified by operation id):--------------------------------------------------- 2 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 5 - access("T"."TREATMENTCODE"="DL"."TREATMENTCODE") 10 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 12 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5)Outline Data------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE_LEAF(@"INS$1") FULL(@"INS$1" "CC"@"INS$1") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") FULL(@"SEL$3" "DL"@"SEL$3") FULL(@"SEL$3" "T"@"SEL$3") LEADING(@"SEL$3" "DL"@"SEL$3" "T"@"SEL$3") USE_HASH(@"SEL$3" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$3") END_OUTLINE_DATA */ There is no DISTINCT Placement view and no hint.The 10053 trace shows a new legend "DP: Bypassed: Not SELECT"implying that this is a transformation that it is possible only for SELECTs. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#4) DP: Checking validity of distinct placement for query block SEL$3 (#4) DP: Bypassed: Not SELECT. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#3) DP: Checking validity of distinct placement for query block SEL$2 (#3) DP: Bypassed: Not SELECT. In 12.1 (and hopefully in 11.2.0.4 when released) the restriction on applying CBQT to some DMLs and DDLs (like CTAS) is lifted.This is documented in BugTag Note:10013899.8 Allow CBQT for some DML / DDLAnd interestingly enough, it is possible to have a one-off patch in 11.2.0.3. SQL> select DESCRIPTION,OPTIMIZER_FEATURE_ENABLE,IS_DEFAULT 2 from v$system_fix_control where BUGNO='10013899'; DESCRIPTION ---------------------------------------------------------------- OPTIMIZER_FEATURE_ENABLE IS_DEFAULT ------------------------- ---------- enable some transformations for DDL and DML statements 11.2.0.4 1

Read the article

Failure retrieving contents of directory

- by Bondye

Currently I have a couple of websites. My problem is that if I login on 1 specific domain with any of my programs (using notepadd++, FileZilla and Netbeans) the program stops at the content listing. I had it correctly running, (I'm working on a project on this domain for more than a year now) and suddenly I broke it somehow. This only happens on 1 specific domain, all other domains (from other hosts) are working. My colleague (next to me with same ip address) is able to login on this domain. Notepadd++ says: Failure retrieving contents of directory Filezilla says: Failed to retrieve directory listing Netbean popups: Upload files on save failed. (Because I have the setting upload on save enabled.) What I tried: First I thought it's my firewall, I disabled firewall but no result. Also notice that all other domain are working. Maby a blacklist with my ip address? No my colleague has the same ip address. Could anyone help me on this? Notepad++ Log [NppFTP] Everything initialized -> TYPE I Connecting -> Quit 220 ProFTPD 1.3.3e Server ready. -> USER username 331 Password required for domain -> PASS *HIDDEN* 230 User username logged in -> TYPE A 200 Type set to A -> MODE S 200 Mode set to S -> STRU F 200 Structure set to F -> CWD /domains/domain.nl/ 250 CWD command successful Connected -> CWD /domains/domain.nl/ 250 CWD command successful -> PASV 227 Entering Passive Mode (194,247,31,xx,137,xx). -> LIST -al Failure retrieving contents of directory /domains/domain.nl/ Filezilla log Status: Verbinden met 194.247.xx.xx:21... Status: Verbinding aangemaakt, welkomstbericht afwachten... Antwoord: 220 ProFTPD 1.3.3e Server ready. Commando: USER username Antwoord: 331 Password required for username Commando: PASS ******** Antwoord: 230 User username logged in Commando: SYST Antwoord: 215 UNIX Type: L8 Commando: FEAT Antwoord: 211-Features: Antwoord: MDTM Antwoord: MFMT Antwoord: LANG en-US;ja-JP;zh-TW;it-IT;fr-FR;zh-CN;ru-RU;bg-BG;ko-KR Antwoord: TVFS Antwoord: UTF8 Antwoord: AUTH TLS Antwoord: MFF modify;UNIX.group;UNIX.mode; Antwoord: MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*; Antwoord: PBSZ Antwoord: PROT Antwoord: REST STREAM Antwoord: SIZE Antwoord: 211 End Commando: OPTS UTF8 ON Antwoord: 200 UTF8 set to on Status: Verbonden Status: Mappenlijst ophalen... Commando: PWD Antwoord: 257 "/" is the current directory Commando: TYPE I Antwoord: 200 Type set to I Commando: PASV Antwoord: 227 Entering Passive Mode (194,247,31,xx,xxx,xx). Commando: MLSD Fout: Verbinding verloren Fout: Ontvangen van mappenlijst is mislukt Sorry that it's dutch.

Read the article

I have bluescreen-phobia

- by Charlie Somerville

I'm scared of the Blue Screen of Death. Seriously. Whenever I hibernate or shutdown my computer, I have to turn the screen off in case it bluescreens during that process. Whenever I see a bluescreen, it makes my heart skip a beat and I jump a little - especially if it's on my own computer. I decided that this is getting ridiculous after I experienced a BSOD this evening. My computer booted back up and I decided to switch off the screen and leave the room. I came back about a minute later and it still hadn't got to the login screen. To find out what happened, I actually covered the screen with two A4 pages and gradually peeled them back after I saw that the screen wasn't blue. This is going way too far, but I can't help it. I am legitimately afraid of BSODs. Does anyone have any advice on how I can help myself?

Read the article

Problem with uninstalling Microsoft .NET Framework 4 Extended Beta 2 on Windows Vista

- by empi

Hi. I have a problem with uninstalling Microsoft .NET Framework 4 Extended Beta 2. I wanted to uninstall it but I cancelled the process. Then I was asked if there was a problem without uninstallation if I want to change to compatibility mode. I accidentally chose to change to compatibility mode. Since then, every time I try to uninstall it, I get an error that the installer cannot run in compatibility mode. How can I fix it? I look for installer file and it's not marked to run in compatibility mode. I cannot find the file that was marked to run in compatibility mode after answering mentioned question. Thanks in advance for help.

Read the article

Redirect network logs from syslog to another file

- by w0rldart

I keep logging way to much info (not needed, for now) in my syslog, and not daily or hourly... but instant. If I want to watch for something in my syslog I just can't because the network log keeps interfering. So, how can I redirect network logs to another file and/or stop logging it? Dec 10 17:01:33 user kernel: [ 8716.000587] MediaState is connected Dec 10 17:01:33 user kernel: [ 8716.000599] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:33 user kernel: [ 8716.000601] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:33 user kernel: [ 8716.000612] rt28xx_get_wireless_stats ---> Dec 10 17:01:33 user kernel: [ 8716.000615] <--- rt28xx_get_wireless_stats Dec 10 17:01:39 user kernel: [ 8722.000714] MediaState is connected Dec 10 17:01:39 user kernel: [ 8722.000729] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:39 user kernel: [ 8722.000732] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:39 user kernel: [ 8722.000747] rt28xx_get_wireless_stats ---> Dec 10 17:01:39 user kernel: [ 8722.000751] <--- rt28xx_get_wireless_stats Dec 10 17:01:44 user kernel: [ 8726.904025] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:01:45 user kernel: [ 8728.003138] MediaState is connected Dec 10 17:01:45 user kernel: [ 8728.003153] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:45 user kernel: [ 8728.003157] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:45 user kernel: [ 8728.003171] rt28xx_get_wireless_stats ---> Dec 10 17:01:45 user kernel: [ 8728.003175] <--- rt28xx_get_wireless_stats Dec 10 17:01:51 user kernel: [ 8734.004066] MediaState is connected Dec 10 17:01:51 user kernel: [ 8734.004079] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:51 user kernel: [ 8734.004082] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:51 user kernel: [ 8734.004096] rt28xx_get_wireless_stats ---> Dec 10 17:01:51 user kernel: [ 8734.004099] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.004108] MediaState is connected Dec 10 17:01:57 user kernel: [ 8740.004119] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:57 user kernel: [ 8740.004121] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:57 user kernel: [ 8740.004132] rt28xx_get_wireless_stats ---> Dec 10 17:01:57 user kernel: [ 8740.004135] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.436021] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:03 user kernel: [ 8746.005280] MediaState is connected Dec 10 17:02:03 user kernel: [ 8746.005294] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:03 user kernel: [ 8746.005298] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:03 user kernel: [ 8746.005312] rt28xx_get_wireless_stats ---> Dec 10 17:02:03 user kernel: [ 8746.005315] <--- rt28xx_get_wireless_stats Dec 10 17:02:09 user kernel: [ 8752.004790] MediaState is connected Dec 10 17:02:09 user kernel: [ 8752.004804] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:09 user kernel: [ 8752.004808] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:09 user kernel: [ 8752.004821] rt28xx_get_wireless_stats ---> Dec 10 17:02:09 user kernel: [ 8752.004825] <--- rt28xx_get_wireless_stats Dec 10 17:02:15 user kernel: [ 8757.984031] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:15 user kernel: [ 8758.004078] MediaState is connected Dec 10 17:02:15 user kernel: [ 8758.004094] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:15 user kernel: [ 8758.004097] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:15 user kernel: [ 8758.004112] rt28xx_get_wireless_stats ---> Dec 10 17:02:15 user kernel: [ 8758.004116] <--- rt28xx_get_wireless_stats Dec 10 17:02:16 user kernel: [ 8759.492017] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:19 user kernel: [ 8762.002179] SCANNING, suspend MSDU transmission ... Dec 10 17:02:19 user kernel: [ 8762.004291] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:19 user kernel: [ 8762.025055] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:19 user kernel: [ 8762.027249] RT35xx: SwitchChannel#1(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.170206] RT35xx: SwitchChannel#2(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.318211] RT35xx: SwitchChannel#3(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.462269] RT35xx: SwitchChannel#4(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.606229] RT35xx: SwitchChannel#5(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.750202] RT35xx: SwitchChannel#6(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x07, R=0x02 Dec 10 17:02:20 user kernel: [ 8762.894217] RT35xx: SwitchChannel#7(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.038202] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.040194] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.040199] BAR(1) : Tid (0) - 03a3:037e Dec 10 17:02:20 user kernel: [ 8763.040387] SYNC - End of SCAN, restore to channel 11, Total BSS[03] Dec 10 17:02:20 user kernel: [ 8763.040400] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:20 user kernel: [ 8763.040402] bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~ Dec 10 17:02:20 user kernel: [ 8763.040405] SCAN done, resume MSDU transmission ... Dec 10 17:02:20 user kernel: [ 8763.047022] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.047026] BAR(1) : Tid (0) - 03a3:03a5 Dec 10 17:02:21 user kernel: [ 8763.898130] bImprovedScan ............. Resume for bImprovedScan, SCAN_PENDING .............. Dec 10 17:02:21 user kernel: [ 8763.898143] SCANNING, suspend MSDU transmission ... Dec 10 17:02:21 user kernel: [ 8763.900245] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:21 user kernel: [ 8763.921144] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:21 user kernel: [ 8763.923339] RT35xx: SwitchChannel#8(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8763.996019] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:21 user kernel: [ 8764.066221] RT35xx: SwitchChannel#9(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.210212] RT35xx: SwitchChannel#10(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.215536] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.215542] BAR(1) : Tid (0) - 0457:0452 Dec 10 17:02:21 user kernel: [ 8764.244000] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.244004] BAR(1) : Tid (0) - 0459:0456 Dec 10 17:02:21 user kernel: [ 8764.253019] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.253023] BAR(1) : Tid (0) - 045c:0458 Dec 10 17:02:21 user kernel: [ 8764.256677] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.256681] BAR(1) : Tid (0) - 045c:045b Dec 10 17:02:21 user kernel: [ 8764.259785] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.259788] BAR(1) : Tid (0) - 045d:045b Dec 10 17:02:21 user kernel: [ 8764.280467] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.280471] BAR(1) : Tid (0) - 045f:045c Dec 10 17:02:21 user kernel: [ 8764.282189] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.282192] BAR(1) : Tid (0) - 045f:045e Dec 10 17:02:21 user kernel: [ 8764.354204] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.356408] ScanNextChannel():Send PWA NullData frame to notify the associated AP! Dec 10 17:02:21 user kernel: [ 8764.498202] RT35xx: SwitchChannel#12(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.642210] RT35xx: SwitchChannel#13(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF7, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.790229] RT35xx: SwitchChannel#14(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF8, K=0x04, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.934238] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.935243] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.935249] BAR(1) : Tid (0) - 048e:0485 Dec 10 17:02:22 user kernel: [ 8764.936423] SYNC - End of SCAN, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.936436] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:22 user kernel: [ 8764.936440] SCAN done, resume MSDU transmission ... Dec 10 17:02:22 user kernel: [ 8764.940529] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.942178] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.942182] BAR(1) : Tid (0) - 0493:048e Dec 10 17:02:22 user kernel: [ 8764.942715] CNTL - All roaming failed, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.948016] MMCHK - No BEACON. restore R66 to the low bound(56) Dec 10 17:02:22 user kernel: [ 8764.948307] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 1111 Dec 10 17:02:23 user kernel: [ 8766.048073] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:23 user kernel: [ 8766.552034] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:27 user kernel: [ 8770.001180] MediaState is connected Dec 10 17:02:27 user kernel: [ 8770.001197] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:27 user kernel: [ 8770.001201] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:27 user kernel: [ 8770.001219] rt28xx_get_wireless_stats ---> Dec 10 17:02:27 user kernel: [ 8770.001223] <--- rt28xx_get_wireless_stats Dec 10 17:02:28 user kernel: [ 8771.564020] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:29 user kernel: [ 8772.064031] QuickDRS: TxTotalCnt <= 15, train back to original rate

Read the article

Adding Volcanos and Options - Earthquake Locator, part 2

- by Bobby Diaz

Since volcanos are often associated with earthquakes, and vice versa, I decided to show recent volcanic activity on the Earthquake Locator map. I am pulling the data from a website created for a joint project between the Smithsonian's Global Volcanism Program and the US Geological Survey's Volcano Hazards Program, found here. They provide a Weekly Volcanic Activity Report as an RSS feed. I started implementing this new functionality by creating a new Volcano entity in the domain model and adding the following to the EarthquakeService class (I also factored out the common reading/parsing helper methods to a separate FeedReader class that can be used by multiple domain service classes): private static readonly string VolcanoFeedUrl = ConfigurationManager.AppSettings["VolcanoFeedUrl"]; /// <summary> /// Gets the volcano data for the previous week. /// </summary> /// <returns>A queryable collection of <see cref="Volcano"/> objects.</returns> public IQueryable<Volcano> GetVolcanos() { var feed = FeedReader.Load(VolcanoFeedUrl); var list = new List<Volcano>(); if ( feed != null ) { foreach ( var item in feed.Items ) { var quake = CreateVolcano(item); if ( quake != null ) { list.Add(quake); } } } return list.AsQueryable(); } /// <summary> /// Creates a <see cref="Volcano"/> object for each item in the RSS feed. /// </summary> /// <param name="item">The RSS item.</param> /// <returns></returns> private Volcano CreateVolcano(SyndicationItem item) { Volcano volcano = null; string title = item.Title.Text; string desc = item.Summary.Text; double? latitude = null; double? longitude = null; FeedReader.GetGeoRssPoint(item, out latitude, out longitude); if ( !String.IsNullOrEmpty(title) ) { title = title.Substring(0, title.IndexOf('-')); } if ( !String.IsNullOrEmpty(desc) ) { desc = String.Join("\n\n", desc .Replace("<p>", "") .Split( new string[] { "</p>" }, StringSplitOptions.RemoveEmptyEntries) .Select(s => s.Trim()) .ToArray()) .Trim(); } if ( latitude != null && longitude != null ) { volcano = new Volcano() { Id = item.Id, Title = title, Description = desc, Url = item.Links.Select(l => l.Uri.OriginalString).FirstOrDefault(), Latitude = latitude.GetValueOrDefault(), Longitude = longitude.GetValueOrDefault() }; } return volcano; } I then added the corresponding LoadVolcanos() method and Volcanos collection to the EarthquakeViewModel class in much the same way I did with the Earthquakes in my previous article in this series. Now that I am starting to add more information to the map, I wanted to give the user some options as to what is displayed and allowing them to choose what gets turned off. I have updated the MainPage.xaml to look like this: <UserControl x:Class="EarthquakeLocator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:basic="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls" xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl" xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" > <UserControl.Resources> <DataTemplate x:Key="EarthquakeTemplate"> <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1" Width="{Binding Size}" Height="{Binding Size}" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="{Binding UtcTime}" /> <TextBlock Text="{Binding LocalTime}" /> <TextBlock Text="{Binding DepthDesc}" /> </StackPanel> </ToolTipService.ToolTip> </Ellipse> </DataTemplate> <DataTemplate x:Key="VolcanoTemplate"> <Polygon Fill="Gold" Stroke="Black" StrokeThickness="1" Points="0,10 5,0 10,10" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center" MouseLeftButtonUp="Volcano_MouseLeftButtonUp"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="Click icon for more information..." /> </StackPanel> </ToolTipService.ToolTip> </Polygon> </DataTemplate> </UserControl.Resources> <UserControl.DataContext> <vm:EarthquakeViewModel AutoLoadData="True" /> </UserControl.DataContext> <Grid x:Name="LayoutRoot"> <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--" Center="{Binding MapCenter, Mode=TwoWay}" ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}"> <bing:MapItemsControl ItemsSource="{Binding Earthquakes}" ItemTemplate="{StaticResource EarthquakeTemplate}" /> <bing:MapItemsControl ItemsSource="{Binding Volcanos}" ItemTemplate="{StaticResource VolcanoTemplate}" /> </bing:Map> <basic:TabControl x:Name="tabs" VerticalAlignment="Bottom" MaxHeight="25" Opacity="0.7"> <basic:TabItem Margin="90,0,-90,0" MouseLeftButtonUp="TabItem_MouseLeftButtonUp"> <basic:TabItem.Header> <TextBlock x:Name="txtHeader" Text="Options" FontSize="13" FontWeight="Bold" /> </basic:TabItem.Header> <StackPanel Orientation="Horizontal"> <TextBlock Text="Earthquakes:" FontWeight="Bold" Margin="3" /> <StackPanel Margin="3"> <CheckBox Content=" < 4.0" IsChecked="{Binding ShowLt4, Mode=TwoWay}" /> <CheckBox Content="4.0 - 4.9" IsChecked="{Binding Show4s, Mode=TwoWay}" /> <CheckBox Content="5.0 - 5.9" IsChecked="{Binding Show5s, Mode=TwoWay}" /> </StackPanel> <StackPanel Margin="10,3,3,3"> <CheckBox Content="6.0 - 6.9" IsChecked="{Binding Show6s, Mode=TwoWay}" /> <CheckBox Content="7.0 - 7.9" IsChecked="{Binding Show7s, Mode=TwoWay}" /> <CheckBox Content="8.0 +" IsChecked="{Binding ShowGe8, Mode=TwoWay}" /> </StackPanel> <TextBlock Text="Other:" FontWeight="Bold" Margin="50,3,3,3" /> <StackPanel Margin="3"> <CheckBox Content="Volcanos" IsChecked="{Binding ShowVolcanos, Mode=TwoWay}" /> </StackPanel> </StackPanel> </basic:TabItem> </basic:TabControl> </Grid> </UserControl> Notice that I added a VolcanoTemplate that uses a triangle-shaped Polygon to represent the Volcano locations, and I also added a second <bing:MapItemsControl /> tag to the map to bind to the Volcanos collection. The TabControl found below the map houses the options panel that will present the user with several checkboxes so they can filter the different points based on type and other properties (i.e. Magnitude). Initially, the TabItem is collapsed to reduce it's footprint, but the screen shot below shows the options panel expanded to reveal the available settings: I have updated the Source Code and Live Demo to include these new features. Happy Mapping!

Read the article

VNC client not working -- Not able to see the changes happening on the other side

- by javanoob

Here is the Problem: I have two computers connected in the same LAN. I am trying to access one computer from another using Remote Desktop Viewer, I am able to see the remote desktop. But when i click on any thing or perform any action, I dont see the result but the action is performed on the remote desktop..But it is not refreshed on the remote desktop screen.. For Ex: 1) Opened Remote Desktop viewer 2) Connected to the other computer which has yahoo home page opened 3) Clicked on the close button of the web page 4) Action is performed on the other computer (Yahoo page is closed). 5) On Remote Desktop screen i still see the Yahoo home page 6) Whatever action i perform on remote desktop screen i see the same screen(In this case yahoo home page) Bottom line: Whatever screen i see on the start up of Remote Desktop viewer that is not getting refreshed. So the thing is though i am able to perform actions on remote desktop, the screen is not refreshing.. How do i solve this? I hope i made my point clear.. NOTE: I am connecting to Ubuntu 9.04 machine from Ubuntu 10.04LTS.. I am really not sure if that makes any difference.

Read the article

execute script after desktop loaded?

- by Andre

I want to execute bash script on startup that opens several terminals in different workspaces. Script works just fine if I call it from terminal, but it doesn't work if executed from crontab using @reboot: #!/usr/bin/env bash #1 make sure we have enough workspaces gconftool-2 --set -t int /apps/metacity/general/num_workspaces 7 #2. Launch programs in these terminals wmctrl -s 6 gnome-terminal --full-screen --execute bash -c "tmux attach; bash" wmctrl -s 5 gnome-terminal --full-screen --execute bash -c "weechat-curses; bash" wmctrl -s 4 gnome-terminal --full-screen --execute bash -c "export TERM=xterm-256color; mutt; bash" wmctrl -s 3 gnome-terminal --full-screen wmctrl -s 2 gnome-terminal --full-screen wmctrl -s 1 gnome-terminal --full-screen wmctrl -s 0 google-chrome --start-maximized I think it's because crontab job triggers before desktop environment is loaded...maybe...? How can I execute this script after desktop environment is loaded? thanks:) Update 1: i've started it from crontab initially like this: @reboot $HOME/andreiscripts/startup.sh >> $HOME/andreiscripts/testlog.txt 2>&1 and was getting these errors: Cannot open display. Failed to parse arguments: Cannot open display: Cannot open display. Failed to parse arguments: Cannot open display: Cannot open display. ..... Update 2 I've tried to launch script from System Preferences Startup Applications /home/andrei/andreiscripts/startup.sh >> /home/andrei/Desktop/out.txt 2>&1 but script only opened first gnome-terminal in workspace 6... and wouldn't continue executing the rest of the script until I close that gnome-terminal and so on....

Read the article

Windows Vista Password changed... What the?

- by Moshe

My mom's Vista Home Premium (32 bit) password was changed. My mom said that she didn't change it and she doesn't think anyone else here did either. So.. Could this have been done remotely? I'm running Ophcrack now, what else can we do? (I haven't tried safe mode yet.) I'm a techie and somewhat baffled. Help! Edit: ophcrack found empty LM but no NT hash is displayed. Entering safe mode... Edit2: I'm an idiot. Well sort of. Ophcrack could not crack the password which was just lowercase English letters, but for some reason, I was able to login using the orignal password in safe mode. Once in safe mode I "changed the password" back to it's original value and was then able to login in regular mode... It's time to run a virus scan.

Read the article

Rate limit a wireless interface

- by Jamie Hankins

I have access to my routers SSH and IPTables. I want to rate limit my guest network to 1Mb/s so they can't guzzle my bandwidth. rai1 RTWIFI SoftAP ESSID:"GuestNetwork" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi0 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F8 Bit Rate=300 Mb/s wdsi1 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi2 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s wdsi3 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s I'm just wondering the command I need to limit it. I tried the iwconfig limit command but it failed. Thanks

Read the article

VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

- by George Marian

Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

Read the article

After installing Win7 on my laptop I'm having trouble extending the desktop to an external monitor

- by devoured elysium

I have a HP TX2000 laptop and a HP w2408 screen. Yesterday, I installed Win7 and I'm having trouble having the 24 inches screen work as a secondary screen. It seems like my laptop cannot detect both screens (its own and the 24 inches one). I think I already have all the drivers installed (I ran Win7's tool to detect and automatically update drivers and it said everything was up to date!), so what might be the problem? If I connect the 24 inch screen to my laptop, it will happily show a copy of what is being shown on that big screen too, but I'd like to have it ''extend'' the desktop to the big screen, instead.

Read the article

How to implement jquery and Mootools together ?

- by Avi Kumar Manku

I am developing a website in which I am implementing two slider for images gallery using one with jQuery and one with moottools. But there is problem in implementing these because when I use both together the jQuery slider doesn't works where mootools slider works. jQuery slider works in case where I remove mootools. What should I do to implement both sliders together? Any suggestions will be helpful. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Tresmode | Footwear & Accessories</title> <script type="text/javascript" src="js/jquery-1.5.min.js"></script> <script src="js/jquery.easing.1.3.js" type="text/javascript"></script> <script src="js/jquery.slideviewer.1.2.js" type="text/javascript"></script>  <script src="js/jquery.syntax.min.js" type="text/javascript" charset="utf-8"></script> <script type="text/javascript"> $(window).bind("load", function() { $("div#mygaltop").slideView({toolTip: true, ttOpacity: 0.5}); $("div#mygalone").slideView(); //if leaved blank performs the default kind of animation (easeInOutExpo, 750) $("div#mygaltwo").slideView({ easeFunc: "easeInOutBounce", easeTime: 2200, toolTip: true }); $("div#mygalthree").slideView({ easeFunc: "easeInOutSine", easeTime: 100, uiBefore: true, ttOpacity: 0.5, toolTip: true }); }); $(function(){ $.syntax({root: 'http://www.gcmingati.net/wordpress/wp-content/themes/giancarlo-mingati/js/jquery-syntax/'}); }); </script> <link href="css/style.css" rel="stylesheet" type="text/css" /> <link href="css/product.css" rel="stylesheet" type="text/css" /> <link href="css/scroll.css" rel="stylesheet" type="text/css" />  <script language="javascript" type="text/javascript" src="js/mootools-1.2-core.js"></script> <script language="javascript" type="text/javascript" src="js/mootools-1.2-more.js"></script> <script language="javascript" type="text/javascript" src="js/SlideItMoo.js"></script> <script language="javascript" type="text/javascript"> window.addEvent('domready', function(){ /* thumbnails example , links only */ new SlideItMoo({itemsVisible:5, // the number of thumbnails that are visible currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this thumbsContainer: 'thumbs', elementScrolled: 'thumb_container', overallContainer: 'gallery_container'}); /* thumbnails example , div containers */ new SlideItMoo({itemsVisible:5, // the number of thumbnails that are visible currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this thumbsContainer: 'thumbs2', elementScrolled: 'thumb_container2', overallContainer: 'gallery_container2'}); /* banner rotator example */ new SlideItMoo({itemsVisible:1, // the number of thumbnails that are visible showControls:0, // show the next-previous buttons autoSlide:2500, // insert interval in milliseconds currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this transition: Fx.Transitions.Bounce.easeOut, thumbsContainer: 'banners', elementScrolled: 'banner_container', overallContainer: 'banners_container'}); }); </script> </head> <body> <div id="landing">  <div id="landing_menu"> <ul> <li><a class="active" href="#">SPECIALS</a></li> <li><a href="#">SHOP MEN'S</a></li> <li class="none"><a class="none" href="#">SHOP WOMEN'S</a></li> </ul> </div>   <div id="container_part"> <div id="big_image_slider">  <div id="mygaltop" class="svw"> <ul> <li><img alt="Tresmode | Footwear & Accessories" src="images/briteloves.png" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/1.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/2.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/3.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/4.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/5.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/6.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/7.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/8.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/9.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/10.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/11.jpg" /></li> <li><img alt="Tresmode | Footwear & Accessories" src="images/12.jpg" /></li> </ul> </div> </div> <div class="new_style_banner"><img src="images/new_styles.png" alt="new style" /></div> <div class="new_style_banner"><img src="images/ford-super-models.png" alt="ford super models" /></div> </div>   <div id="footer_scroll">  <div id="gallery_container"> <div id="thumb_container"> <div id="thumbs"> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/1.jpg"/></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/2.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/3.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/4.jpg" /></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/5.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/6.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/1.jpg"/></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/2.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/7.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/8.jpg" /></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/9.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/10.jpg"/></a> </div> </div> </div>  </div>  </div> <script type="text/javascript"> var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); </script> <script type="text/javascript"> var pageTracker = _gat._getTracker("UA-2064812-2"); pageTracker._initData(); pageTracker._trackPageview(); </script> </body> </html>

Read the article

Building/Installing Required a52 Plugin

- by user71139

I am trying to compile and install the a52 plugin following the instructions from here: https://help.ubuntu.com/community/DigitalAC-3Pulseaudio This worked on Ubuntu 11.10 but gives me some errors when I try to compile the plugin on Ubuntu 12.04. I've searched for a solution however I couldn't find much on this topic in general, not to talk about a solution. I would really appreciate some help on this: bogdan@bogdan-desktop:~$ cd ~/tmp/ bogdan@bogdan-desktop:~/tmp$ cd alsa-plugins-1.0.25/ bogdan@bogdan-desktop:~/tmp/alsa-plugins-1.0.25$ make make all-recursive make[1]: Entering directory `/home/bogdan/tmp/alsa-plugins-1.0.25' Making all in oss make[2]: Entering directory `/home/bogdan/tmp/alsa-plugins-1.0.25/oss' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -I/usr/include/alsa -g -O2 -MT ctl_oss.lo -MD -MP -MF .deps/ctl_oss.Tpo -c -o ctl_oss.lo ctl_oss.c ../libtool: line 831: X--tag=CC: command not found ../libtool: line 864: libtool: ignoring unknown tag : command not found ../libtool: line 831: X--mode=compile: command not found ../libtool: line 997: *** Warning: inferring the mode of operation is deprecated.: command not found ../libtool: line 998: *** Future versions of Libtool will require --mode=MODE be specified.: command not found ../libtool: line 1141: Xgcc: command not found ../libtool: line 1141: X-DHAVE_CONFIG_H: command not found ../libtool: line 1141: X-I.: command not found ../libtool: line 1141: X-I..: command not found ../libtool: line 1141: X-Wall: command not found ../libtool: line 1141: X-g: command not found ../libtool: line 1141: X-I/usr/include/alsa: No such file or directory ../libtool: line 1141: X-g: command not found ../libtool: line 1141: X-O2: command not found ../libtool: line 1141: X-MT: command not found ../libtool: line 1141: Xctl_oss.lo: command not found ../libtool: line 1141: X-MD: command not found ../libtool: line 1141: X-MP: command not found ../libtool: line 1141: X-MF: command not found ../libtool: line 1141: X.deps/ctl_oss.Tpo: No such file or directory ../libtool: line 1141: X-c: command not found ../libtool: line 1192: Xctl_oss.lo: command not found ../libtool: line 1197: libtool: compile: cannot determine name of library object from `': command not found make[2]: *** [ctl_oss.lo] Error 1 make[2]: Leaving directory `/home/bogdan/tmp/alsa-plugins-1.0.25/oss' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/bogdan/tmp/alsa-plugins-1.0.25' make: *** [all] Error 2 bogdan@bogdan-desktop:~/tmp/alsa-plugins-1.0.25$

Read the article

Child Folder inheriting a permission that parent folder does not have (NTFS)

- by just.another.programmer

I'm reconfiguring roaming profiles on my network to use proper NTFS security settings according to this article. I have reset the following permissions on the roaming profile parent folder: CREATOR OWNER, Full Control, Subfolder and files only User group with profiles, List folder, Create folders, This folder only System, Full Control, This folder, subfolders, and files Then I select one of the actual roaming profile folders and follow these steps to fix the NTFS settings: Click Security, Advanced Uncheck "Allow inheritable permissions..." Choose "Remove..." Recheck "Allow inheritable permissions..." Click "Apply" After I choose apply, I get the following permissions listed on the roaming profile folder: Administrators (MYDOMAIN\Administrators) Full Control, This folder only CREATOR OWNER, Full Control, Subfolders and files only System, Full Control, This folder, subfolders, and files Where is the Administrators entry coming from!? There is an entry on the root of the drive for Administrators to have full control, but the Roaming Profile Parent folder is not set to inherit any permissions, and it does not have the administrators permission.

Search Results

Search found 36850 results on 1474 pages for 'full screen mode'.

Page 238/1474 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >

- by Nimonika

- by Chris

- by Howiecamp

- by jonney

- by antonio Musella

- by Adam Jones

- by Christian Gonzalez

- by aman-gupta

- by Jason Fitzpatrick

- by Ken Le

- by amacias

- by Bondye

- by Charlie Somerville

- by empi

- by w0rldart

- by Bobby Diaz

- by javanoob

- by Andre

- by Moshe

- by Jamie Hankins

- by George Marian

- by devoured elysium

- by Avi Kumar Manku

- by user71139

- by just.another.programmer

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >