Search Results

Search found 756 results on 31 pages for 'acer travelmate'.

Page 24/31 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • How to force laptop mode on/off

    - by Vi
    root@vi-notebook:/home/vi# laptop_mode start force Laptop mode enabled, not active How to start laptop mode? It starts successfully when AC adapter is removed, but not by explicit command. The system is GNU/Linux Debian i386 squeeze (not up to date), 2.6.30-zen2-31270-gc7099db-dirty, Acer Extensa 5220. Update: Changed to ENABLE_LAPTOP_MODE_ON_AC=1 in /etc/laptop_mode/laptop-mode.conf, now it is turned on always. But I can't turn it off with laptop_mode stop force, it stays turned on anyway. How do I turn it off again?

    Read the article

  • Error- D:\ is not accessible. Access is denied

    - by Aaron
    All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

    Read the article

  • Radeon HD 5770 - DisplayPort Problem

    - by Nick Schmit
    I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

    Read the article

  • Keyboard Typing Problem

    - by Wietse G
    Hello all, When i got home from work yesterday i couldn't logg in on my account on my desktop pc (Acer Aspire M5620). The reason for this was that when i was typing, more diggets would appear than i pressed. After logging on an account that required no password (my Dad's) i found out that some of my key bindings were messed up. For instance when typing: W --- qwe would appear q --- qw + right mouse e --- we a --- as s --- asd d --- sd z --- zx x --- zxc c --- xc Moreover pressing: 1 --- 12 2 --- 123 3 --- 23 I am typing this from my Dad's laptop (which is working like a charm). I was wondering if anyone has seen this problem before and thus knows a way to fix it. I'm not the brainy type when it comes to computers. Ps: I apologise for any mistakes in my English, for it is not my native tongue. I'm from the Netherlands

    Read the article

  • How do I fix a garbled screen on a Gateway LT3103u?

    - by paracaudex
    I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

    Read the article

  • small light laptop with docking station that has a PCI(e) slot

    - by laramichaels
    Hi everyone, I am looking for a new laptop/netbook and I have two simple requirements: must be small (10-12in screen) and light (<=3-3.5pounds); must work with a dock into which I can put a PCI or PCI Express card. Basically, I have no performance requirements. Discontinued or low-end are fine. All I want is something easy to carry that when at work I can use a PCI/PCI Express card with to do multi-head. Eg, if an Acer Aspire 1410 fitted the second requirement I would by one in a blink. The only solution with which I am acquainted are Thinkpads that can go into the Thinkpad Advanced Dock. Do other laptop (or netbook brands) also offer the possibility of using Although this is not a "requirement" per se, I would rather hear about options that would not involve buying the latest-greatest-+$2k model... : ) Thank you for any advice! ~lara

    Read the article

  • Old notebook internal display randomly not recognized

    - by jfcfar
    I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

    Read the article

  • nvidia graphics resolution problem

    - by Deepak Adhikari
    I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

    Read the article

  • I want to upgrade my GPU to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card

    - by jatin singh
    Hello every body this is my first post here.. I want to know about my motherboard's PCI express version , my motherboard as I don't have 10 reputation so I am providing image link here http://i.stack.imgur.com/6PWV9.png I have PCI express slot and I want to upgrade it to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card.. this GPU has PCI exp version 2. Here in my city,the shopkeeper said that we have to check if the PCI express of my board is compatible to that GPU but I want to purchase it from flipkart because they sell it for less money (sorry for bad English :/) I mailed to my computers company (Acer) but they didn't reply to any of my mail so my friend told me about Super User.

    Read the article

  • Install full version of Unity on Chrome OS using crouton

    - by Sam Kong
    I have an Acer Chromebook. Using crouton, I installed Ubuntu (unity) on it. I am pretty familiar Ubuntu 12.04. But the installed one is very minimized package. My fonts are missing and I manually installed language pack for Korean but still browser can't display Korean characters. Is there a way to install the whole packages via crouton like when you install Ubuntu 12.04 with the CD? Or is there a script that installs the missing packages on the bare Ubuntu? Thanks. Sam

    Read the article

  • Can't install or update Ubuntu after using parameter acpi_osi = Linux

    - by Lucas Leitão
    I recently had an issue with my acer 4736z notebook because I was having a blank screen after booting the OS, then someone told me to use the parameter GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" after quiet splash inside the grub. It worked for me, but since then I can't install a thing or update anything on Linux because it says Removing linux-image-extra-3.5.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.5.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic /usr/sbin/grub-mkconfig: 11: /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-extra-3.5.0-17-generic.postrm line 328. dpkg: erro ao processar linux-image-extra-3.5.0-17-generic (--remove): sub-processo script post-removal instalado retornou estado de saída de erro 1 Removendo linux-image-3.5.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.5.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-17-generic /boot/vmlinuz-3.5.0-17-generic /usr/sbin/grub-mkconfig: 11: /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.5.0-17-generic.postrm line 328. dpkg: erro ao processar linux-image-3.5.0-17-generic (--remove): sub-processo script post-removal instalado retornou estado de saída de erro 1 Erros foram encontrados durante o processamento de: linux-image-extra-3.5.0-17-generic linux-image-3.5.0-17-generic E: Sub-process /usr/bin/dpkg returned an error code (1) I already tried to remove older kernels but it gives me the same message. Do you have a clue about what should I do?

    Read the article

  • How do I re-enable the backlight?

    - by Scott Severance
    Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

    Read the article

  • Reverse WiFi to Broadcast connection coming from a USB device

    - by Daniel Clem
    I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

    Read the article

  • Blank pale blue screen with Live USB Kubuntu on AMD Sempron 2800+ processor

    - by WGCman
    I am trying to install Kubuntu onto a USB stick to use on my Acer Aspire 1362 laptop with an AMD Sempron 2800+ chip. Using Windows XP, I downloaded and saved to the laptop's hard drive: kubuntu-2.04.1-desktop-i386.iso from the GetKubuntu website and LinuxLive USB Creator 2.8.16.exe from the Linux live website I then installed the latter and ran it, installing the kubuntu onto the Memory stick. Leaving the Bios setup unchanged, the USB stick is ignored and Windows boots. If I change the Bios boot order so that the memory stick takes precedence, I see a dark blue screen announcing Kubukntu 12.04, and on selecting either “live Mode” or “Persistent mode”, messages flash by quickly, some of which appear to be error messages, including “trying to unpack rootfs image as initramfs”, “cannot allocate resource for mainboard”, “no plug and play device found”. Eventually I see a pale blue screen with four moving dots announcing Kubukntu 12.04, similar to the login screen of my Kubuntu desktop, but no invitation to log in or indeed any dialog. After several minutes, this changes to a black screen with more messages including “no caching mode present”, “ADDRCONF(NETDEV_UP): wlan0: link is not ready”, then degrades to a blank pale blue screen which can only be moved by switching the computer off. Finding no way to log the error messages passing by, I managed to photograph most of them, but know no way to attach the photo to this forum. As suggested by User 68186 (to whom thanks!), I have edited my original post to reflect the recent progress, so the following two comments are now superseded.

    Read the article

  • Properly configuring Linux keyboard on my laptop

    - by antoniocs
    Hey! I have a ps/2 keyboard connected to an Acer Aspire 1694 WLMI via a ps/2 to usb converter. The laptop is running Ubuntu 9.04. The keyboard is a HP model number: SK-250C. I have configured in the 'Keyboard Preferences' the layout to HP SK-250x Multimedia Keyboard. The big problem is when I press certain keys (like for example the arrow keys) I get the 'Save Screenshot' dialog. This is really getting annoying, sometimes I am tying to write an address in browser and just want to go back a few letters and can't. There are other keys that trigger the dialog also (windows key, insert key, home key, page up and page down key, delete key, end key) All works fine If I use the laptop keyboard, but I really want to use the HP keyboard. EDIT: I was testing this and it seems that if I have the 'Num Lock' key turned off the keys work properly. Strange but true!!

    Read the article

  • Boot problems w/ External HDD

    - by JeremyT
    I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

    Read the article

  • Struggles to connect to network when using WPA with a BCM43225

    - by pst007x
    When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

    Read the article

  • Increasing the screen resolution in Ubuntu 10.04

    - by Veera
    I'm running Ubuntu 10.04 edition on my Acer 5738Z laptop. The screen size of my laptop is about 15'' but the screen resolution in Ubuntu is stuck at 1366x768. I know that my monitor could give better resolution, because previously I was running Win XP and I was able to set higher resolution there. So, my questions here: How do I increase my screen resolution, here? As per the answer given to a related question, I tried to edit the xorg.conf file, but I couldn't find the file in the place /etc/x11/. Should I create this file? If I have to install screen drivers separately, where could I find it?

    Read the article

  • Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

    - by Tim
    Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

    Read the article

  • Laptop Power down.

    - by BENBUN
    This question relates to my ACER laptop running Windows VISTA. Currently when I close the lid of my laptop the laptop does not power down, however when I open the lid it does. When looking at the power settings it is set to power down when closing the lid. The trigger to this seems to be the lid being opened not being closed. I seem to recall this behaviour changing when I installed Windows Media centre. Any ideas on how I can get the power down to work on the lid closing. thanks

    Read the article

  • Losing partitions after every reboot

    - by Winston Smith
    I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

    Read the article

  • Laptop Power down.

    - by BENBUN Coder
    This question relates to my ACER laptop running Windows VISTA. Currently when I close the lid of my laptop the laptop does not power down, however when I open the lid it does. When looking at the power settings it is set to power down when closing the lid. The trigger to this seems to be the lid being opened not being closed. I seem to recall this behaviour changing when I installed Windows Media centre. Any ideas on how I can get the power down to work on the lid closing. thanks

    Read the article

  • DVD player Ubuntu 9.10

    - by pcguynardone
    Hello everyone at SeverFault. I am new to this fourm. I have been using ubuntu since 8.04. Here is my problem. When I try to watch one of my cisco videos I get wmas error. I never had to use this format before. I went on ubuntu fourm they told me to use vlc media. I am using vlc media. mplayer, it still have error with that, sounds and video. Is there a program that I could use to watch wmas files on my ubuntu 9.10. It is a laptop ACer Extensa 5620z. Thank you for who ever will help !!

    Read the article

  • DVD player Ubuntu 9.10

    - by pcguynardone
    Hello everyone at SeverFault. I am new to this fourm. I have been using ubuntu since 8.04. Here is my problem. When I try to watch one of my cisco videos I get wmas error. I never had to use this format before. I went on ubuntu fourm they told me to use vlc media. I am using vlc media. mplayer, it still have error with that, sounds and video. Is there a program that I could use to watch wmas files on my ubuntu 9.10. It is a laptop ACer Extensa 5620z. Thank you for who ever will help !!

    Read the article

  • ubi-partman failed with exit code 10 during 12.10 fresh install

    - by Austen
    ive been trying to install ubuntu 12.10 on my acer aspire one 534h,using an iso from the official site and a 16gb flash drive using unetbootin. my aa1 is running factory settings (xp). it will boot fine from the usb, but the installation throws the error in the title after choosing my wifi options, and contineus to give the error after every subsequent step. after trying to complete the installation ingoring the error, it hangs on the ask ubuntu screen. ive tried reformatting and reflashing (sorry, heavy android user) ubuntu to the flash drive, to no avail... do i need to format somthing else, or is it something to do with th Hdd and RAID drives? ive looked in my BIOS and found nothing related. only the option for sata or ide... any help would be great, as ive been working at this all day... edit: the error message was ubi-partman has failed with exit code 10. see (gave a directory) for more info. it then informed me that if i continued the install could be incomplete or completly broken. not sure abouth the wording in the second part, but the error is word for word... thank you.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >