Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 24/306 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• DVD/CD-ROM drives stop working in Windows 7

  - by Marcus L

  All of a sudden Windows 7 (64 bit) lost all DVD and CD-ROM drives. It worked fine for about a month, then I don't know what happened. At first I thought it was a hardware problem - that my DVD-ROM had malfunctioned. But then I realized that Windows 7 no longer picked up on Demon Tools drives either. I can boot both Windows installation and Knoppix from the DVD-drive. So it seems to be a general problem with "disc-media". When trying to reinstall the hardware DVD-ROM Windows recognizes the drive (though sometimes simply label it as "CD-ROM drive"), but then says something went wrong - with from what I understand is a default error message (39), claiming the driver has become corrupt. I've tried every Microsoft recommended action, i.e. uninstall, reinstall, look for driver updates etc. etc., but with no luck. Any tip most welcome!

  Read the article

• several hard drives and partitions

  - by Tim

  If there are two physically separate hard drives, should they be treated as two pre-defined partitions? If yes: should they be treated as two primary partitions (including one or two of them can become extended partition(s) and be further subdivided into logical partitions)? Or they (or one part of each) can be treated as two logical partitions of a extended partition? Thanks! I intended to ask if there can be a primary/logical partition that are partially on both hard drives? And if there can be a logical partition on a hard drive and another logical partition on another hard, and the two logical partitions belong to the same extended partition? I guess the answers to both questions are no?

  Read the article

• Debian can't see one of my hard drives

  - by nask00s

  Today I installed Linux Debian in dual boot with Windows 7. I have 3 hard drives, two for starage and one for the operating systems. The problem is with the two storage drives which are exactly same. In debian I can only see one of them. Before Debian I had Ubuntu and there wasn't any problem. Also I didn't changed anything from that drive. What should I do? I don't want to format it or delete anything.

  Read the article

• Hot-swapping drives

  - by user57770

  I have hot swap drives and controllers, but have never actually used the hot swap capability. What is the procedure for doing so? Do I need to warn Linux that I'm about to pull a drive out? Should I do anything after I put a drive back in? Does it make a difference whether the drive is part of a RAID set? The drives are generally RAIDed, but not always. Any RAID sets are managed by Linux, rather than the controller. The machines are running Fedora and CentOS.

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Auto-mount CD/DVD drive to single, specific mount point every time?

  - by Christopher Parker

  Currently, whenever I insert a CD or DVD into my DVD drive, it mounts to a location such as /media/<LABEL>, where <LABEL> is the arbitrary label assigned to the optical disc. I remember, once upon a time, CD and DVD media being reliably located at /media/cdrom0 or something similar. Why was this changed? And how do I get this old behavior back for this drive? I can understand this behavior for USB sticks. It makes sense for those. But not for CD/DVD media, in my opinion. For example, because of this, I have no way to configure Wine to point to my DVD drive, as the mount point changes with every single CD I insert. TL;DR: How do I make CD/DVD media always mount to /media/cdrom0?

  Read the article

• Windows XP Ubuntu Installer (version 11.10) error dialog - Permission Denied

  - by MacGyver

  When installing Ubuntu 11.10 on Windows XP (2nd option in installer), the install failed with popup. How can I fix this? Here is the contents of file "C:\Documents and Settings\Keith\Local Settings\Temp\wubi-11.10-rev241.log". I only pasted the last few lines because of the question size limit. \Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether D:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain D:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Ubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Kubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Xubuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether E:\ is a valid Mythbuntu CD 03-25 22:29 DEBUG Distro: does not contain E:\casper\filesystem.squashfs 03-25 22:29 DEBUG Distro: checking whether Y:\ is a valid Ubuntu CD 03-25 22:29 INFO Distro: Found a valid CD for Ubuntu: Y:\ 03-25 22:29 INFO root: Running the installer... 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 DEBUG WinuiInstallationPage: target_drive=C:, installation_size=18000MB, distro_name=Ubuntu, language=en_US, locale=en_US.UTF-8, username=keith 03-25 22:29 INFO root: Received settings 03-25 22:29 INFO WinuiPage: appname=wubi, localedir=C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\translations, languages=['en_US', 'en'] 03-25 22:29 DEBUG TaskList: # Running tasklist... 03-25 22:29 DEBUG TaskList: ## Running select_target_dir... 03-25 22:29 INFO WindowsBackend: Installing into C:\ubuntu 03-25 22:29 DEBUG TaskList: ## Finished select_target_dir 03-25 22:29 DEBUG TaskList: ## Running create_dir_structure... 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\disks\boot\grub 03-25 22:29 DEBUG CommonBackend: Creating dir C:\ubuntu\install\boot\grub 03-25 22:29 DEBUG TaskList: ## Finished create_dir_structure 03-25 22:29 DEBUG TaskList: ## Running uncompress_target_dir... 03-25 22:29 DEBUG TaskList: ## Finished uncompress_target_dir 03-25 22:29 DEBUG TaskList: ## Running create_uninstaller... 03-25 22:29 DEBUG WindowsBackend: Copying uninstaller Y:\wubi.exe -> C:\ubuntu\uninstall-wubi.exe 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi UninstallString C:\ubuntu\uninstall-wubi.exe 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi InstallationDir C:\ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayName Ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayIcon C:\ubuntu\Ubuntu.ico 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi DisplayVersion 11.10-rev241 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi Publisher Ubuntu 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi URLInfoAbout http://www.ubuntu.com 03-25 22:29 DEBUG registry: Setting registry key -2147483646 Software\Microsoft\Windows\CurrentVersion\Uninstall\Wubi HelpLink http://www.ubuntu.com/support 03-25 22:29 DEBUG TaskList: ## Finished create_uninstaller 03-25 22:29 DEBUG TaskList: ## Running copy_installation_files... 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\data\custom-installation -> C:\ubuntu\install\custom-installation 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\winboot -> C:\ubuntu\winboot 03-25 22:29 DEBUG WindowsBackend: Copying C:\DOCUME~1\Keith\LOCALS~1\Temp\pyl1.tmp\data\images\Ubuntu.ico -> C:\ubuntu\Ubuntu.ico 03-25 22:29 DEBUG TaskList: ## Finished copy_installation_files 03-25 22:29 DEBUG TaskList: ## Running get_iso... 03-25 22:29 DEBUG TaskList: New task copy_file 03-25 22:29 DEBUG TaskList: ### Running copy_file... 03-25 22:32 ERROR TaskList: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-25 22:32 DEBUG TaskList: # Cancelling tasklist 03-25 22:32 DEBUG TaskList: New task check_iso 03-25 22:32 ERROR root: [Errno 13] Permission denied Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\utils.py", line 202, in copy_file IOError: [Errno 13] Permission denied 03-25 22:32 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 03-25 22:32 DEBUG TaskList: # Cancelling tasklist 03-25 22:32 DEBUG TaskList: # Finished tasklist

  Read the article

• Looking for a free or open-source burner emulator [closed]

  - by Jared Harley

  Possible Duplicate: Virtual CDR driver I am looking for a free or open-source virtual CD/DVD emulator to run in a Windows environment. What I want is similar to what SlySoft's Virtual Clone Drive or Daemon Tools provides, but the emulated drive needs to be a burner of some type. The burner should be able to save disc images (.iso, .ccd, etc) to my harddrive - basically, the same as if I burned the files to a CD-R, and then ripped them back to a disc image. I have already looked around some and come across 2 - DVD neXt COPY iTurns and NoteBurner M4P. Both of these programs create a virtual CD-RW drive, but they are integrated into their product (for burning from iTunes to create mp3 files) and cannot create disc images. I am currently writing a piece of software that will have the capability to burn disc images onto CDs/DVDs, and I don't want to end up with a 100 coasters while I'm testing my software. Anyone have any ideas? Related ServerFault queston: Create netbook recovery image without DVD burner (virtual burner?)

  Read the article

• Upgraded Ubuntu, all drives in one zpool marked unavailable

  - by Matt Sieker

  I just upgraded Ubuntu 14.04, and I had two ZFS pools on the server. There was some minor issue with me fighting with the ZFS driver and the kernel version, but that's worked out now. One pool came online, and mounted fine. The other didn't. The main difference between the tool is one was just a pool of disks (video/music storage), and the other was a raidz set (documents, etc) I've already attempted exporting and re-importing the pool, to no avail, attempting to import gets me this: root@kyou:/home/matt# zpool import -fFX -d /dev/disk/by-id/ pool: storage id: 15855792916570596778 state: UNAVAIL status: One or more devices contains corrupted data. action: The pool cannot be imported due to damaged devices or data. see: http://zfsonlinux.org/msg/ZFS-8000-5E config: storage UNAVAIL insufficient replicas raidz1-0 UNAVAIL insufficient replicas ata-SAMSUNG_HD103SJ_S246J90B134910 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 UNAVAIL The symlinks for those in /dev/disk/by-id also exist: root@kyou:/home/matt# ls -l /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910* /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51* lrwxrwxrwx 1 root root 9 May 27 19:31 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910 -> ../../sdb lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part9 -> ../../sdb9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 -> ../../sdd lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part9 -> ../../sdd9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 -> ../../sde lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part9 -> ../../sde9 Inspecting the various /dev/sd* devices listed, they appear to be the correct ones (The 3 1TB drives that were in a raidz array). I've run zdb -l on each drive, dumping it to a file, and running a diff. The only difference on the 3 are the guid fields (Which I assume is expected). All 3 labels on each one are basically identical, and are as follows: version: 5000 name: 'storage' state: 0 txg: 4 pool_guid: 15855792916570596778 hostname: 'kyou' top_guid: 1683909657511667860 guid: 8815283814047599968 vdev_children: 1 vdev_tree: type: 'raidz' id: 0 guid: 1683909657511667860 nparity: 1 metaslab_array: 33 metaslab_shift: 34 ashift: 9 asize: 3000569954304 is_log: 0 create_txg: 4 children[0]: type: 'disk' id: 0 guid: 8815283814047599968 path: '/dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1' whole_disk: 1 create_txg: 4 children[1]: type: 'disk' id: 1 guid: 18036424618735999728 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1' whole_disk: 1 create_txg: 4 children[2]: type: 'disk' id: 2 guid: 10307555127976192266 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1' whole_disk: 1 create_txg: 4 features_for_read: Stupidly, I do not have a recent backup of this pool. However, the pool was fine before reboot, and Linux sees the disks fine (I have smartctl running now to double check) So, in summary: I upgraded Ubuntu, and lost access to one of my two zpools. The difference between the pools is the one that came up was JBOD, the other was zraid. All drives in the unmountable zpool are marked UNAVAIL, with no notes for corrupted data The pools were both created with disks referenced from /dev/disk/by-id/. Symlinks from /dev/disk/by-id to the various /dev/sd devices seems to be correct zdb can read the labels from the drives. Pool has already been attempted to be exported/imported, and isn't able to import again. Is there some sort of black magic I can invoke via zpool/zfs to bring these disks back into a reasonable array? Can I run zpool create zraid ... without losing my data? Is my data gone anyhow?

  Read the article

• Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

  - by Quanano

  We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

  Read the article

• Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

  - by T.J. Crowder

  Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

  Read the article

• Can't install SB750 RAID drivers in Windows 7 for two additional storage drives

  - by jf46

  Mobo: ASUS M4A79XTD, 790X/SB750 OS: Windows 7 x64 I currently have SATA 1-4 set to RAID and SATA 5-6 set to IDE. I have an SSD connected to SATA5 with Windows 7 installed on it, and that works fine. I also have configured a RAID 1 array of two 1TB HDDs, connected to SATA 1 and 2. These don't show up in Windows, and I'm having trouble getting the RAID driver installed. I even tried booting from the Windows DVD and repairing or installing Windows, but when I navigated to the relevant .sys files on my motherboard's driver CD, Windows setup told me that the files in question weren't relevant to my hardware. To be clear: I'm not trying to install Windows on a RAID. I have Windows installed on a separate disk on a separate SATA controller. I just want to get the SB750 RAID drivers installed so that the Windows disk utility can see my RAID 1 array, which is composed of two other disks. Do I need to wipe my SSD and reinstall Windows to get the RAID driver installed? That seems kind of ridiculous, and given what I described above, I'm not even sure it would work. Any help or guidance would be appreciated - thanks! Edit: Also, I've copied the driver files from the mobo CD into system32 and rebooted, no luck. Then I changed HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\Start from 3 to 0, and that didn't work either.

  Read the article

• Issue booting Linux Mint from Live CD?

  - by Vee

  I had Windows 8 and Linux Mint 15 dual booted on my laptop. When I first installed Linux, I wasn't able to load into because the grub would not show. To fix this, I used boot-repair from a Live CD. This time, I updated to Windows 8.1 and it showed a watermark telling me my secure boot wasn't configured properly. I then went and enabled secure boot (BIOS) and I believe it was after that that the Grub would not show once again. I tried to boot from a Linux CD again but when I try, it gives me the following errors: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... Before, it was giving me an error with sector 0x6d200 or something instead of 0x0. I am completely unsure of what to do. I do not know what other details to give except that this my have happened after I enabled secure boot, and I actually clicked reset to default setting so I am unsure if any other settings were changed in the BIOS menu.

  Read the article

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• Backup software for incremental swapped-out drives?

  - by user13743

  We're using Acronis Home 11 to backup our main Windows machine at the office. We have a set of portable hard drives that we swap out each week, for redundancy. We have incremental sets ( a new diff of the entire series each night) building on each drive. However, from time to time, Acronis gets confused and sometimes makes a new full backup. This eats up a lot of drive on the disks. Also, I have to trick the Acronis script each time I swap out a drive and point it to the new incremental backup set. Finally, if a drive gets full, there's no way to partition the backup set on a drive. I found this out the hard way, and now one drive is full with one backup set. So now on the other drive, I have three folders of backup sets. When one starts to get full, I delete the oldest one and start a new set. That way one single drive never gets filled up with one single backup set. I'm looking for a backup software that can backup Windows in incremental sets, and doesn't get tripped up with swapped out drives. Is there a better solution?

  Read the article

• BIOS unable to boot CD or Hard Drive

  - by Gabriel

  Motherboard Intel DQ35MP. HDD Caviar Green 1TB. I'm having problems with my BIOS and/or hard drive/disc drive. Came back from a trip, booted my computer, and realized that the BIOS wasn't booting anymore, just a black screen with no beep sounds. Only fans and lights on. Then I thought it might be caused by the video card, I removed it, and still no BIOS screen. Then I removed the hard drive and voila BIOS screen is back again. If the hard drive is defective then I can check that with a Rescue Disk. I inserted the CD on the Disc Tray but the computer did not respond to it, the screen freezes in black with an "E7" string at the bottom right corner just after the BIOS screen, this happens with or without discs. BIOS settings are set to default, and CD reading is on top of the boot device list. EDIT I removed the BIOS battery, rebooted the CPU, the BIOS screen showed up, and then it freezed in E7. Placed the BIOS batttery, rebooted and same thing, we are stuck with the E7 string. I uploaded a video to illustrate the problem http://www.youtube.com/watch?v=13jPdBcIrBU

  Read the article

• Imac g5 with no OS nor CD drive

  - by sinekonata

  What I want: Ubuntu on a g5 Imac. What I have: An empty PC (Intel g5 17" Imac) with broken CD drive. Its model is A1173. This PC with Ubuntu 12.04 and an old Vista partition. a usb flash drive. Problems: No CD means the only boot Drive I could use is USB. There are no BIOS on Macs so I can't set boot settings or even see if it detects my USB drive. When I start the machine and press ALT the first and only thing I see is an old corrupted winXP partition and not a single option or additional information. So assuming blindly that the Mac hardware/firmware works normally, I don't have any Mac OS to use any of the tools that I found on different tutorials for building a bootable .img drive for macs. I can't find much software on Linux/Windows to substitute to those tools, for example among others converting an .iso file (win/linux) to .img (mac I guess). Which makes me think that the scenario where someone like me has Mac hardware but no Mac OS is extremely rare. So other than finding someone that has a Mac I have no solution. So I ask what would you do? the only thing is it should not involve any money (I know mac soft is rarely free) which also excludes getting any MacOS unless I can use a free macos.img for VM or restore the original Mac for free. Thank you

  Read the article

• LSI1068E hidden drives after failed raid volume creation

  - by silk

  We are using LSI 1068E raid chipset with SAS drives. We had added new drives to the system, and tried to create new raid volume with the lsiutil, unfortunately the creation failed. The problem is that now we do not have the new raid volume and disks 'disappeared' and are not available as targets for raid. Lsiutil option 8 (scan for devices) does not display these disks at all. lsiutil option 16 (display attached devices) does list them as targets. lsiutil option 21+30 (create raid) does not list these disks. Just after insrting them to enclosure these disks appeared in the system, as expected. During the raid creation kernel logged: Mar 4 08:40:02 kilo kernel: [57555.687946] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 2 id=0 Mar 4 08:40:02 kilo kernel: [57555.687978] mptbase: ioc0: PhysDisk has been created Mar 4 08:40:02 kilo kernel: [57555.695438] scsi target0:0:2: mptsas: ioc0: RAID Hidding: fw_channel=0, fw_id=0, physdsk 2, sas_addr 0x5000c50008ebe5fd for both of them, again as expected. Unfortunately they did not appear back even though the volume was not created. The same situation is in the controller's bios after a reboot. Taking the disks out and inserting in different slots did not help, either. Has someone seen a similar problem? And knows how to 'get back' our disks?

  Read the article

• Using an APT proxy for downloads during installation

  - by intuited

  During system installation from a Desktop LiveCD (10.10) I checked the "Download updates during installation" option. Before starting the install I had configured an apt proxy server; this had been used correctly for my various package installs prior to launching the system installation GUI. However, the downloads taking place during the installation are not using the proxy. Is there a way to force usage of an APT proxy during installation?

  Read the article

• Recover Ubuntu grub without LiveCD - Can't boot with Ubuntu LiveCD after install Windows

  - by Paulocoghi

  I installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition. I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely. I can not run Ubuntu in live mode to recover grub. Is there any way to recover the grub/grub2 without the LiveCD? Edit: [Important] I've downloaded a new Ubuntu 10.10 ISO. I also did the MD5 check. It's all right. Then, I recorded this .iso and still can not load the LiveCD to the end.

  Read the article

• Booting the liveCD/USB in efi mode fails on tablet xe700t1a

  - by F.L.

  My tablet is Samsung Series 7 Slate (xe700t1a-a02fr). It operates an intel sandy bridge architecture. The main issue about this tablet is that it ships with a windows 7 install in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. I have used the 12.04.1 desktop iso (I have read somewhere that it is the only one that can boot in EFI mode). What are the other leads I can follow ? thanks

  Read the article

• How to boot live iso images?

  - by virpara

  I found that it can be done with loopback as follows menuentry "Lucid ISO" { loopback loop (hd0,1)/boot/iso/ubuntu-10.04-desktop-i386.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/ubuntu-10.04-desktop-i386.iso noprompt noeject initrd (loop)/casper/initrd.lz } But it works only with ubuntu or its derivatives. How it should be written if I want to boot other live images like fedora, cent, opensuse etc. ? Edit: I found some other entries but all of them are probably debian based. menuentry "Linux Mint 10 Gnome ISO" { loopback loop /linuxmint10.iso linux (loop)/casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/linuxmint10.iso noeject noprompt splash -- initrd (loop)/casper/initrd.lz } menuentry "DBAN ISO" { loopback loop /dban.iso linux (loop)/DBAN.BZI nuke="dwipe" iso-scan/filename=/dban.iso silent -- } menuentry "Tinycore ISO" { loopback loop /tinycore.iso linux (loop)/boot/bzImage -- initrd (loop)/boot/tinycore.gz } menuentry "SystemRescueCd" { loopback loop /systemrescuecd.iso linux (loop)/isolinux/rescuecd isoloop=/systemrescuecd.iso setkmap=us docache dostartx initrd (loop)/isolinux/initram.igz } Edit2: How to chainload grub and syslinux from grub2? Edit3: I want to boot other live images without any removable devices and use grub2 so need menu entries specific to grub2.

  Read the article

• ISO booting with grub2 in Ubuntu on an Apple

  - by Robert Vila

  I have Ubuntu with grub2 installed in an Apple Macbook pro with dual boot (using rEFIt), and I would like to use grub2 to boot the LiveCD ISO image of a system based in Debian too (CrunchBang). The ISO image is saved in the same hard disk, same partition as Ubuntu. I can easily boot many other LiveCD ISO images, but I cannot boot this one, and I cannot boot the MacOS system, from the grub menu, either. The installation of Ubuntu left a couple of menu entries to boot MacOS, but they never worked. SO I don't know if it is possible to boot them, and how. I have tried many options, but the menuentry I am trying now to boot crunchBang is this one: menuentry "crunchbang-10-20120207-i386.iso" { set isofile="/home/user/Desktop/ISO/crunchbang-10-20120207-i386.iso" loopback loop (hd0,3)$isofile linux (loop)/live/vmlinuz1 iso-scan/filename=$isofile toram=filesystem.squashfs findiso=$isofile boot=live config -- initrd (loop)/live/initrd1.img } And I copied it from here: http://linux4netbook.blogspot.com.es/2012/08/due-crunchbang-e-un-pennino.html

  Read the article

• Difference between LiveCD, LiveUSB, full-install, and persistence?

  - by Jay

  I am currently running Ubuntu as a guest vm on a Win 7 host via VirtualBox, but I would like to have a portable version of Ubuntu when I am not using my laptop. I am unsure as to the difference between the following: 1)LiveCD with persistence; 2)LiveCD without persistence; 3)LiveUSB with persistence; 4)LiveUSB without persistence; 5)Full-install. I have a USB flash drive (32GB), and I also have empty DVDs lying around. I know that persistence means that data can be saved, but I am unsure as to which option to choose. What is the difference between a LiveUSB and a full-install on a USB thumbdrive and why would I want to pick one over the other? Thanks for any help.

  Read the article

• Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

  - by ahow628

  Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >