Search Results

Search found 23653 results on 947 pages for 'disk problems'.

Page 24/947 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• In Linux, is it possible to get a listing of drives' disk space usage that also shows volume labels?

  - by DavidH

  I know about df, of course, but df does not output volume labels. I have 5 USB hard drives plugged into my NAS box, and would love to know which is which. Current df output: Filesystem Size Used Avail Use% Mounted on /dev/sda1 27G 2.2G 24G 9% / none 56M 476K 55M 1% /dev none 60M 0 60M 0% /dev/shm none 60M 332K 59M 1% /var/run none 60M 0 60M 0% /var/lock none 60M 0 60M 0% /lib/init/rw /dev/sde1 150G 102G 48G 68% /media/usb0 /dev/sdb1 299G 196G 103G 66% /media/usb1 /dev/sdc1 233G 183G 51G 79% /media/usb2 /dev/sdd1 233G 209G 25G 90% /media/usb3 /dev/sdf1 150G 101G 49G 68% /media/usb4

  Read the article

• Running Windows 7 physical disk virtualized under Linux

  - by CajunLuke

  I have an existing Windows 7 installation that I'd like to virtualize under Linux. Windows boots fine on Disk A, Linux boots fine on Disk B. (Both disks are SATA.) I can mount the Windows disk when in Linux. I've tried VirtualBox and VMWare Player and neither will allow me to boot from the other disk. VirtualBox doesn't seem to have the option to do so. VMWare Player has the option to have an IDE drive exposed to the virtual environment as a SCSI disk. I've tried that, but it throws the error "Cannot connect virtual device ide1:0 because no corresponding device is available on the host." I've verified that it's pointing to the correct hard drive. I'm willing to try other virtualization products, and I'm not averse to spending a little money to get this to work. I've seen this other question, and it's not a duplicate, as I haven't gotten that far yet. I'm also interested in solutions going the other way (Linux on Windows), but that'd be lagniappe. Gory Hardware Details: Lenovo T410, 2.4 GHz Core i5 (has virtualization extensions), 4GiB RAM, 2x 320 GiB SATA HDD, one in optical bay. Fedora 14 2.6.35.10-74.fc14.x86_64, Windows 7 32-bit.

  Read the article

• what's wrong to my extra hard disk?

  - by Paul

  i'm adding some hard disk on my computer.when i on my computer the extra hard disk was detected by my computer but when i open My Computer the extra hard disk was not on there. What happen?

  Read the article

• RAID1: Which disk will be mirrored?

  - by tmelen

  How does a RAID1 system determine which disk to use as the source and which disk to use as the destination when mirroring? Assume for instance the following scenario: A RAID1 array is created with two disks A and B. A is replaced by disk C, which is added to the array. Files are beeing modified as time goes by. Now B is removed and A is reinserted. Will the RAID1 system realize that A and C are out of sync? And that C is more up-to-date than A? And if not, is there a safe way to avoid the mirroring process to start immediately when disk A is inserted?

  Read the article

• Windows 8: 100% disk active time, no actual data transferred

  - by fingerbangpalateclick

  Occasionally, like several times an hour, my hard drive will appear to lock up: Task Manager will show 100% active time with read and write speeds of 0. I can still switch between open windows, but anything that requires a disk access will stall for around a minute until the hard disk starts working properly again. It happens at apparently random intervals, and only happens in Windows 8. Not 7, nor Linux. It is probably not a problem with the disk itself: This is a relatively new hard drive, and S.M.A.R.T. is showing no errors. Only happens in Windows 8: not any other OS that has used the same partition, or different partitions. So, what is going on? How can I fix this? Note: this is a different problem then this one: Extremely high disk activity without any real usage My task manager would look similar, but Average Response Time, Read Speed, and Write Speed would all be 0.

  Read the article

• Linux RHEL : Making disk image efficiently

  - by TheProfoundGeek

  I have a linux box having RHEL. Its disk (hda1) is having free space of about 25GB. I have an another disk (hda2) which is of 250GB having another RHEL instance, it's partitioned for 200GB. Data on the disk occupies about 21GB of data. The image of hda2 needs to be taken and restored on other disk of same specs. What is the best way to make image file of the hda2? Ideally the images size should be around 25GBs as the actual data on the disk is just 21GB. I am aware about the following two methods. Method 1 : Raw Image dd if=/dev/hda2 of=/path/to/image dd if=/path/to/image of=/dev/hda3 Question 1 : Will the above method make a gigantic image of 250GBs? Is it efficient? Method 2 : Compressed Image. dd if=/dev/hda2 | gzip > /path/to/image.gz gzip -dc /path/to/image.gz | dd of=/dev/hda2 Question 2 : I tried the method 2, its taking too long. What are the pit falls of this methods? Which of the above method id efficient and why? Is there any other Linux utility which can do the job? Third party tools are no no.

  Read the article

• Booting Ubuntu Failure : error: attempt to read or write outside of disk 'hd0'

  - by never4getthis

  I have installed ubuntu 12.10 in a WD external harddrive (320GB). This is a complete installation, not live USB. When I plug it in my HP desktop I go to the BIOS settings and boot off the harddrive, everything work perfectly -as it should. Now this works on everysingle computer and laptop in my house (all HP) -except for ONE. My HP ProBook 4530s. When I select to boot of the USB I get the Message: error: attempt to read or write outside of disk 'hd0' Now, I have removed the hdd from my laptop and the external drive is the ONLY drive plugged in. Bellow is a picture of the screen. After the message I navigate to ls / (as shown below): After here I try to acces other folders under ls /, for example, I try to go to ls /boot to get to the grub folder. Then I get the same message as before: as shown by the image below: The only folders I can access without getting the message again are /home, /run and /usr. So how do I: Boot Ubuntu from GRUB2 (this screen) manually Set to automatically boot Ubuntu If possible an explanation for this problem Thanks!

  Read the article

• chromium-browser usus 99,99% IO disk

  - by lars

  My favorite browser: chromium is testing my patience. For some reason it sometimes uses 99,99% of I/O. (reading 2-3MB/s) Other processes (updatedb.mlocate, [kswapd0], clementine, compiz) show the same behavior. However this problem always starts and ends with chromium. To illustrate the impact on my system: when my disk starts to spin like crazy en the led burns continiously the system is so slow that it takes about two to five minuits to switch to tty6, log in and execute "killall chromiumbrowser && killall chromium" This is way faster than starting a new terminal in X, just starting a terminal seems to heavy for compiz under these circumstances. Waiting until its over takes more than 30 minuits, if it ends at all. The exact circumstances are difficult to replicate. Several tabs have to be open, usualy 8 or more. It seems that the chance to increases when more complex sites like gmail of plugins like flash are running. Opening several new tabs at omgubunt.co.uk has the best chance to replecate this isue. I have no idea where to start looking for a solution. Any help would be greatly apreciated ubuntu 12.10 | 2GB | 2x 1.66GHz Intel | 32bit | IBM Thinkpad R60e

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

• Fresh install on SSD with Ubuntu and Windows Vista, using whole disk encryption for Ubuntu

  - by nategator

  I would like to do a fresh install on a OCZ Vertex Plus R2 SSD 60GB drive I purchased on the cheap. Since the AES-encryption looks like it may not work optimally for this drive, I would like to set up a dual-boot to Windows Vista (the only Windows copy I have for clean install purposes) and Ubuntu 12.04 with the best encryption scheme possible. My plan is to have Windows around just in case I need to use a program that won't work with Wine and Ubuntu as my daily OS with all of my information secured in case the laptop is ever stolen or sold. Although this setup will not provide a lot of space, I think I can squeeze both OSes and have enough for second-computer office tasks. So, my questions are: Which OS should I install first, Ubuntu or Vista? Any special considerations when partitioning the drive? How should I install Ubuntu to ensure full disk encryption for the Linux partition(s) and or my daily computing? Is there a significant performance upgrade with doing a solo install of Ubuntu instead of a dual boot setup? Will TRIM, for example, work correctly? Are there any significant security concerns with going the route of a dual-boot, other than the fact that any activity on Windows may be fully recoverable if the drive is stolen or sold? Thanks in advance!

  Read the article

• Move SQL Server transaction log to another disk

  - by Jim Lahman

  When restoring a database backup, by default, SQL Server places the database files in the master database file directory.  In this example, that location is in L:\MSSQL10.CHTL\MSSQL\DATA as shown by the issuance of sp_helpfile   Hence, the restored files for the database CHTL_L2_DB are in the same directory     Per SQL Server best practices, the log file should be on its own disk drive so that the database and log file can operate in a sequential manner and perform optimally. The steps to move the log file is as follows: Record the location of the database files and the transaction log files Note the future destination of the transaction log file Get exclusive access to the database Detach from the database Move the log file to the new location Attach to the database Verify new location of transaction log Record the location of the database file To view the current location of the database files, use the system stored procedure, sp_helpfile 1: use chtl_l2_db 2: go 3:   4: sp_helpfile 5: go   Note the future destination of the transaction log file The future destination of the transaction log file will be located in K:\MSSQLLog   Get exclusive access to the database To get exclusive access to the database, alter the database access to single_user.  If users are still connected to the database, remove them by using with rollback immediate option.  Note:  If you had a pane connected to the database when the it is placed into single_user mode, then you will be presented with a reconnection dialog box. 1: alter database chtl_l2_db 2: set single_user with rollback immediate 3: go Detach from the database   Now detach from the database so that we can use windows explorer to move the transaction log file 1: use master 2: go 3:   4: sp_detach_db 'chtl_l2_db' 5: go   After copying the transaction log file re-attach to the database 1: use master 2: go 3:   4: sp_attach_db 'chtl_l2_db', 5: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB.MDF', 6: 'K:\MSSQLLog\CHTL_L2_DB_4.LDF', 7: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_1.NDF', 8: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_2.NDF', 9: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_3.NDF' 10: GO

  Read the article

• Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

  - by Virulan

  Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

  Read the article

• Run Win7 Guest (raw disk) in Ubuntu (which was installed as Dual Boot on existing Win7)

  - by kingdango

  I installed Ubuntu 12.10 on top of Win 7 as a dual boot (awesome!). I'm hoping to use VirtualBox to run my original Win7 instance as a guest OS under Ubuntu. I found this existing question and followed the directions to no avail. I can get the VMDK file created but when I run it I just get a blank black screen with no additional information and Windows never loads. I see no HD activity or anything that would indicate it's loading. I used this command to create the VMDK file: VBoxManager internalcommands createrawvmdk -filename ~/.VirtualBox/Win7Native.vmdk -rawdisk /dev/sda3 It looks like everything was created correctly but I just get a blank screen when I run the VM. I do get this warning when I boot the VM: VirtualBox - Warning The virtual machine execution may run into and error condition as described below... The medium '/home/XXX/.VirtualBox/Win7Native.vmdk' has a logical size of 583GB but the file system the medium is located on can only handle up to 16GB in theory. We strongly recommend to put all your virtual disk images and the snapshot folder on a proper file system (e.g. etc3) with a sufficient size. ErrorId: Fat Partition Detected Severity: Warning How can I get this working?

  Read the article

• Upgrading a hard disk – To repave or to migrate, that is the question

  - by guybarrette

  I recently changed my laptop hard disk from the stock 250GB 5400 drive to a 320GB 7200 drive.  And no, I didn’t bought a SSD drive because the cost is way too much right now.  At $70, my upgrade was a lot cheaper than a SSD drive.  Maybe next year. When changing a system main hard drive, one must ask himself: To repave or to migrate, that is the question.  I choose to migrate so I went to the Acronis Website to take a look at their product line.  They have a few products that could do the job.  One being Acronis Migrate Easy 7.0 and the other being Acronis True Image Home 2010.  Since True Image was just $10 more then Migrate Easy, I bought True Image. I inserted my new hard drive in a 2.5” USB enclosure, and started the migration process.  Once the data copied, I switched the drives.  The process went very smoothly and without hiccups.  Highly recommended. BTW, Acronis offers free trials so I guess that nothing can stop you from “testing” a migration  ;-) var addthis_pub="guybarrette";

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• Lubuntu Stability Problems

  - by marinara

  I installed Lubuntu 11.10 from scratch a few days ago, now I can't even run aptitude without crashing from the mess it's made of the package system. (yes I added a non-offical repository, because I needed firefox 8) I'm a new user. So I don't know. Did I make a mistake by loading Lubuntu? I really like the LXDE stuff. but so many things seem very buggy. ***edit I think besides the sound problems, all of my other problems are with either LXDE or with openbox. And I think the sound problem is Lubuntu specific also. Problems like windows not popping up, windows not getting painted. Windows flashing in the panel for no reason, Windows losing their title bar occasionally, mousewheel changing desktops when i'm clearly in a window, LXDE panel not responding to clicks, applications not launching from the menu, applications not launching from firefox downloads window, applications crashing when I don't do anything but click on them. Pretty sure all this stuff is openbox or LXDE. This is just too much work to keep Lubuntu running. It's a lemon. (sorry I realize I should be constructive but I'm tired) It's pretty clear that openbox needs some damn bugfixes for compatibility with Oneric. And LXDE isn't that great either. I expect things to launch when I click on them. I think installing the acpid package is what made it clear to me. If 20 seconds after installing the package (from the offical repo), linux has already crashed, then I'm in the wrong damn neighborhood.

  Read the article

• changing drive nodes & hdparm

  - by Kalamalka Kid

  I am currently attempting to create a command that works at startup to kill the power on two of my very noisy hard drives. I have edited the etc/rc.local file to include this command: sudo hdparm -y /dev/sdc sudo hdparm -y /dev/sdd exit 0 While I think this should work, it seems the allocated drives keep switching around every time I reboot. I have sda, sdb, sdc, sdd, and sde but they keep getting jumbled around (making the drive I wish to shut different than sdd which is making the task of shutting down the right drive on start-up quite cumbersome. I had a perfectly functioning ftstab file working which disappeard, but I restored it from the back up into the etc/ dir: # <file system> <mount point> <type> <options> <dump> <pass> #Entry for /dev/sda1 : UUID=43c09daf-08a5-44f2-89b0-fc7c6f0d1e67 / ext4 errors=remount-ro 0 1 #Entry for /dev/sdd1 : UUID=443AFBAD7FE50945 /media/DX100 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=FCE456F5E456B21E /media/GalaxyM83 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdf1 : UUID=1CA057FDA057DBB8 /media/Holideck ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdc1 : UUID=7ABB49654B799D40 /media/JX3P ntfs defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 it seems every time I boot the order of the drives changes. I do not know how to resolve this. A quick workaround the problem was to go with UUID instead of the DEV letter by editing the etc/rc.local file to include: hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 So I thought I was in the clear, as I heard both hard drives die down during the boot sequence, BUT, as soon as I log in both drives start up again! so now I have to figure out what is making them start up again after log in, or perhaps another way to get them to turn off. Is there some kind of command i can get to execute after log in? I tried editing the startup applications to include an autossh with: autoshh - sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 autoshh - sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 but this did not seem to work to turn off the disks after log in.

  Read the article

• Hard Drive Formatting and Unmounting Errors

  - by Lucas Carther

  I'm trying to format a hard drive using Ubuntu 11.10. Every time that I attempt to format it from the Disk Utility, I get the error saying the device is busy, and under details it says: /dev/sda1 is mounted Then when I try to unmount it from the disk utility, it shows that the operation has failed and says: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=70D6-1701 from /boot/efi

  Read the article

• Disk drive for / not ready on boot after upgrade from 10.04 to 12.04

  - by Mathieu M-Gosselin

  After upgrading (using the Upgrade button from the update manager) from 10.04.4 to 12.04.1, I cannot boot anymore. Upon booting, I am greeted with the Ubuntu logo and the error "The disk drive for / is not ready yet or not present". I have the option to wait, to skip and to access a basic shell. Waiting overnight did nothing, skipping just gives me the same error for /tmp, /home, then for a UUID and finally it just goes to a black screen with a white "_" in the top left corner. My setup is a dual boot one with XP on a single hard drive, I use separate partitions for / and /home. Back in the day I installed 8.04 directly from the CD while leaving a partition for XP, which I installed after. This setup had never caused any such issues, even when upgrading from 8.04 to 10.04. I have done plenty of research regarding this issue, as many others seem to have had similar issues after doing the same upgrade as me. However, while for most what fixed the problem was running: apt-get -f install after remounting / in read-write, it didn't do it for me. I got dependency errors (see here), which I also investigated. I found https://bugs.launchpad.net/ubuntu/+source/python-defaults/+bug/990740 where most people say the solution that worked is (prior to running the above command) running: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal but that also got me a lot of dependencies errors as output (see here), similar to #34 in the above thread. I also read that running: dpkg --configure -a could help, at first it wouldn't run because it had trouble parsing /var/lib/dpkg/status since there was an extra blank line in a package description (see https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/916799) but I removed it using vim (and then reran the command). It still gives me output that looks like an error, though. Here it is: http://paste.ubuntu.com/1338074/. I also tried re-running the above apt-get commands after that, to no avail. I'm running out of things to try in the hope of getting this fixed, your help would be very much appreciated! Thank you in advance.

  Read the article

• Moved to SSD and now getting "the disk drive for / is not ready yet"

  - by dmt0

  I moved my Ubuntu 12.04 install over to an SSD drive. Copied all directories except for the ones most often written to - var, tmp, ... Reinstalled grub into SSD by booting with live CD and following the commands in this post: How to move Ubuntu to an SSD This seemed to work fine, because when I press "e" in grub menu, I see the expected UUIDs. But right after grub I get could not log bootup: Address already in use the disk drive for / is not ready yet or not present. If I skip, I get same for /tmp /run, and other dirs If I go into manual recovery and do mount -n -o remount,rw / it turns out that everything can mount no problem. Can't get my head around this one. My fstab seems right. grub is right. AHCI in bios is enabled. Why is this happening? What can I do to fix it? When I do drop into shell from this error and get to mount things manually, how do I get the OS to continue loading? Thank you guys for any ideas you can give me. Here's what my fstab looks like right now: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 UUID=67fc8a7a-f1db-485c-88bd-e007c214244f / ext4 defaults,noatime,discard 0 1 # swap was on /dev/sda3 during installation UUID=6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6 none swap sw 0 0 UUID=7397729b-2125-4b1d-b5eb-28866898d773 /hdd ext4 errors=remount-ro 0 1 /hdd/home /home none bind 0 0 /hdd/run /run none bind 0 0 /hdd/tmp /tmp none bind 0 0 /hdd/var /var none bind 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 output from blkid: /dev/sda1: LABEL="System Reserved" UUID="EABC56C1BC568849" TYPE="ntfs" /dev/sda2: UUID="7CCC6124CC60D9C2" TYPE="ntfs" /dev/sda3: UUID="6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6" TYPE="swap" /dev/sda5: UUID="7397729b-2125-4b1d-b5eb-28866898d773" TYPE="ext4" /dev/sdb1: UUID="67fc8a7a-f1db-485c-88bd-e007c214244f" TYPE="ext4" relevant from fdisk -l: Device Boot Start End Blocks Id System /dev/sdb1 2048 115345407 57671680 83 Linux

  Read the article

• Why df and du show different output

  - by Nischay

  When I execute command df -h /tmp it says disk utilization is 100% but when it tried du -sh /tmp it says disk utilization is 2%. I want to know why these commands shows different output and these two commands work and what is the solution of this problem. /var is installed on it own file system .I am using Ubuntu 12.04 server edition on my vps account.Due to this problem utilization of /tmp 100% according to df some programs complain about free space in /tmp.

  Read the article

• Cannot boot from K/Ubuntu install disk on my UEFI system

  - by user93241

  I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

  Read the article

• Problems with nvidia drivers

  - by Crs2489

  I have a problem that I haven't been able to find a solution to. I recently decided to switch from Windows to Ubuntu 11.10, so I originally installed Ubuntu using the wubi installer for windows. After I installed Ubuntu with wubi I installed drivers for nvidia using the additional drivers from system setting and everything worked fine. I then decided that I no longer wanted windows on my computer because i was having problems with it crashing when I went to remove the partition with windows on it using an Ubuntu Live CD I made I found that there were unrepairable problems with both of my partitions so I decided to delete both partitions and install Ubuntu again from the cd now when I try to install nvidia drivers my gui will not load when i start my computer. I have found people who have had similar problems with the gui not loading after installing nvidia drivers but no one who had there gui working after installing with wubi then not working after installing from a cd. I'm using Ubuntu 11.10 32 I have also tried other versions of linux like openSUSE and have had the same problem with the gui not being able to load after installing nvidia drivers.

  Read the article

• How can I do block-oriented disk I/O with Java? Or similar for a B+ tree

  - by Sanoj

  I would like to implement an B+ tree in Java and try to optimize it for disk based I/O. Is there an API for accessing individual disk blocks from Java? or is there an API that can do similar block-oriented access that fits my purpose? I would like to create something like Tokyo Cabinet in 100% Java. Is there anyone that knows what Java only databases like JavaDB is using in the back-end for this? I know that there are probably other languages than Java that can do this better, but I do this in a learning purpose only.

  Read the article

• How to download files directly to disk on the iPhone os?

  - by favo

  Hi, I would like to download files directly from an URL to the disk using objective-c on the iPhone os. Currently I am using NSURLConnection to send a synchronousRequest, writing the returned NSData into a file. How can I change the download handling (still having the request beeing synchronous, it is already in a background thread) to write the data directly to disk, not using memory variables to store the complete content (only small parts)? A sample code would be appreciated. Thank you all in advance for your responses!

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >