Search Results

Search found 25088 results on 1004 pages for 'dsl linux'.

Page 24/1004 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• ACL in linux-based samba shares

  - by Odin

  If I mount a samba share like this from a linux server using ACL in ext3... mount -t cifs //192.168.0.10/smbshare /mnt/smbshare -o user=root password=secret ...and access the share with linux/smb-user smbuser. I have given smbuser write access to all catalogs, but when I write something to the share the owner becomes root (the user that mountet the share). Is there any possibility to make smbuser the owner of the files/catalogs he creates even if the share is mountet by the root-user? This case is supposed to work on a linux terminal server so many different users access the smb share (mountet by root).

  Read the article

• Lightweight Live Linux Image

  - by MA1

  I am working on an application which is being developed in wxPython and C plus using linux core utilities and network support. To be more specific, I only need the following support for following packages/softwares/components. wxPython C Network Support Linux Utilities Vi File System(fdisk/parted, ntfsprogs etc) Basic(cp, mount/umount, mkdir etc) The application will run from a live CD. Currently i am using Fedora 12 with Gnome for live CD. Currently the size of live image is around 350 MB. The size of application is hardly 1 MB. I don't need anything else except above mentioned. Just my application and supporting packages, no desktop etc. So, I need a Lightweight Linux image as smaller as possible providing all the above mentioned packages/components. I am considering the following distributions: Xfce LXDE Fluxbox Enlightenment Any ideas/suggestions?

  Read the article

• Linux with Windows XP vmware guest unable to access certain Internet hosts

  - by unknown

  hi I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version. everything works fine on Linux host I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc. I tried setting MTU and TCP window size on Windows lower, but did not help Any idea what is going on?

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• How to add/remove codecs in linux

  - by agg

  Friends, I'm new to Linux, I need to work on Linux. I have ported Linux to AT91SAM9261-EK board. Now i need to work on Codecs. I just know the definition of codec from wikipedia, Now i need add my own codec to the board. I want to know, Where codec will be preset in 1)File System, 2)Kernel or 3)Player And how to add codec while building entire source, please tell me the steps i need follow. And also how to remove the codec. How to play the video files from pendrive in console, now i can play audio by command 'mplayer "filename" '. Don't know how to play video. Please help me, How to do this. Regards AGG

  Read the article

• Booting Linux from External HDD, with persistence

  - by Moriarty

  I am trying to install Linux, specifically Lubuntu or BackTrack 5 on an external HDD (Seagate FreeAgent GoFlex) but I have had no luck using YUMI, or Untebootin to get it working. I want the hard drive to be able to save the data within Linux (As in, If I install a program, it will stay there). I also tried doing this with a flash drive, which does boot, but it does not save data (I tried following Pendrive's tutorial on creating a casper-rw file and adding "persistent" to various files, but I cannot get it to save files. Basically, I just want a form of linux on a portable device that will save files and settings between boots Note: I do not have a CD to install from. Any help would be greatly appreciated, Thanks!

  Read the article

• Unable to launch google.com inside Linux Ubuntu

  - by Anuradha

  I have installed Ubuntu Linux VM in my Win XP box. I am able to open http://google.com on Win XP but when I login to, ubuntu linux.. and launch this site: I am getting an error: Server not found. The network settings I have on LinuxUbuntu VM is : Adapter1 : attached to Bridge adapter. I tried NAT as well. But nothing seems to work. I am not in China. I provide google.com as mere example. We have a test website which cannot be launched inside Linux Ubuntu.

  Read the article

• How to set up a wireless AP with a linux box and SOCKS proxy

  - by user50455

  I've got: (1) Linux box (Arch linux to be precise, but that doesn't really matter) (2) Ethernet connection on it (say, eth0) (3) Socks proxy on a remote site (say, remote :port), which can be accessed through (2) (4) Wireless card on local linux box (say, eth1) So, the task is: create a wireless access point using (4) on local site (1) in such a way that all connections from it will go through proxy (3). E.g., when one simply connects to that AP (well, there should be DHCP or something for that) and goes to serverfault.com, all the traffic goes through that SOCKS proxy. I'm just asking for the digging direction and some references, not step-by-step tutorial. Thanks in advance

  Read the article

• Linux kernel with grsec + Java / Apache Tomcat

  - by NoozNooz42

  I've got a Debian Linux 64 bit dedicated server. The kernel has the grsec patch applied. I'm mainly using this server to run Apache Tomcat (6.0.26, Java 6) and everything seems fine. The only issue, is that when I start Tomcat, I get a few of these: grsec: From xxx.xxx.xxx.xxx: Segmentation fault occurred at 00007fefe04e4000 in /home/t/jre1.6.0_20/bin/java[java:22403] uid/euid:1001/1001 gid/egid:1001/1001, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0 grsec: more alerts, logging disabled for 10 seconds Then no error logs anymore. Everything is fine. The kernel is: Linux 2.6.32.2-xxxx-grs-ipv4-64 #1 SMP Tue Dec 29 14:41:12 UTC 2009 x86_64 GNU/Linux And the webapp works fine. So there are segmentation fault when Tomcat starts, but everything seems to works fine. Is this concerning? Should I move to a non-grsec kernel?

  Read the article

• Linux Bridge, Samba netbios name/hostname access

  - by Christopher Wilson

  I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

  Read the article

• Where does linux look for shared libs?

  - by EsbenP

  I am trying to get the ar command on an embedded ARM computer running linux. I want to install debian and openjdk. It is a headless system. This is a custom linux distribution provided by the hardware manufacturer. The debian installer is missing the ar command so i tried copying the binaries from the debian package, but when running ar I get error while loading shared libraries: libbfd-2.18.0-multiarch.20080103.so: cannot open shared object file: No such file or directory libbfd is also in the package. I tried linking it to /lib and /usr/lib but I get the same message when running. What is the best way to get debian and ar on a custom linux distro?

  Read the article

• Switching to Linux, Need backup help

  - by Stephen

  I have an existing Vista installation on my thinkpad x200 and I want to install Linux on my machine. I've done this several times already but I usually format the whole disk and dual boot on Windows and Linux. Which means I have to reinstall and reconfigure everything I had on Windows. What I want to do is backup my windows installation (into an image) and start a clean Linux installation, and run the windows image thru Vmware or Virtualbox. Whats the easiest way to do this? any free tools available? I've seen acronis but dont wanna buy it for a 1 time session only.

  Read the article

• Linux Live CD for old computer

  - by Joel Coehoorn

  I have a pentium II (that's right, pentium II) with a scant 200MB of ram. This was a high-end workstation in it's day. The machine currently runs dos on a raid array, and I need to pull some data from it. I figure my best chance at this is to use a linux live cd to copy the data to one of our active directory network shares (there is a network card in the machine). Unfortunately, my linux skills are abysmal, so I'm not sure where to get started: Where should I look to find a linux cd that will run well on such an old system Since I'm likely gonna need to be command-line only, what do I need to do to configure the network card and mount the network share via the command line? Bonus points: exact syntax needed to copy and convert the entire volume for use in VMware server 2.0, but really just copying all the data should be enough.

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• Deploy Jetty as port 80 daemon on Linux

  - by McKAMEY

  I'm curious what techniques you Linux admin gods are using to manage your Jetty deployments. I come from a Windows Server background so I'm still getting used to all of this. I've been looking for a good solution for deploying Jetty instances as port 80 on a Linux installation. So far I've seen this thread which allows Jetty to run as a daemon: http://jira.codehaus.org/browse/JETTY-458 And I've seen this thread which talks about alternates for setting up on port 80: http://wiki.eclipse.org/Jetty/Howto/Port80 These all seemed kind of hacky. Surely there is a relatively standard way of deploying a web server like Jetty on Linux. I'm currently using CentOS 5.5 but open to other distros. Thanks in advance.

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• yum install gcc fails with invalid linux.dropbox.com/fedora directory

  - by john

  I am relatively new to Linux administration. I have installed Centos 6.5 (under VirtualBox on a Win7pro system). When I try to install gcc to the system using yum, I get the following results: [root@localhost etc]# yum clean all Loaded plugins: fastestmirror, refresh-packagekit, security Cleaning repos: Dropbox base extras updates Cleaning up Everything Cleaning up list of fastest mirrors [root@localhost etc]# yum install gcc Loaded plugins: fastestmirror, refresh-packagekit, security Determining fastest mirrors * base: mirrors.tummy.com * extras: mirrors.cat.pdx.edu * updates: centos.mirror.freedomvoice.com http://linux.dropbox.com/fedora/6/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found" Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: Dropbox. Please verify its path and try again It appears that the linux.dropbox.com/fedora/6 subdirectory does not exist. Does anyone have any ints/answers for me. Thanks.

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• linux ftp server with virtual users

  - by kjertil

  i know there are already similar questions for this matter but the answers doesn't really make much sense to anyone who is not really technically comfortable in Linux. I've already tried articles like these for example: http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/ with the result of accidently breaking the whole system. The problem is that, while there are several technical possibilities to set up virtual users with a FTP server, it is not as easy as managing for instance a Filezilla server on Windows. I've seen some Web based GUI's but most of them seems to be out of date. The different flavours of Linux and the large amount of different popular FTP servers also seems to make the matter more complicated. I guess my question is, is there a way, to set up virtual FTP users on Linux without the hastle of having to manually edit PAM, MYSQL and config files?

  Read the article

• linux: upload / download difference on network shares

  - by Batsu

  I have a Red Hat Enterprise Linux 6 (with SELinux) which shows significant differences of speed between download and upload (the latter significantly slower) of files shared over the LAN. The bottleneck seems to be the output of the linux machine since I have a rate around 1Mb/s when WinXP machines download files shared (using samba) by the RHEL machine uploading files from the RHEL to a WinXP's shared folder while uploading from the XP machines to linux's shares downloading XPs' shares on the RHEL any share between Windows machines only run smooth (around 50Mb/s). Since the upload from RHEL to WinXP's share is slowed too I would exclude an issue in the configuration of samba. What could possibly determine this limit in the upload speed? update: iptables doesn't show any output rule and disabling it doesn't show any noticeable difference, so I would rule out it too.

  Read the article

• How to disable ^C from being echoed on Linux on Ctrl-C

  - by pts

  When I press Ctrl-C in any pseudoterminal (xterm, gnome-terminal, rxvt, text console and SSH) in Karmic Koala, the string ^C gets echoed to the terminal in Ubuntu Karmic Koala. This hasn't happened in Ubuntu Jaunty Jackalope. I'd like to get rid of the extra ^C. Example: $ cat foo foo ^C $ _ I got the above by typing C, A, T, Enter, F, O, O, Enter, Ctrl-C. I want to get rid of the ^C, and get this for the same keypresses: $ cat foo foo $ _ I tried setting stty -echoctl, which created a single-character HT (or a box with Unicode 0003 in it) instead of the ^C. I want to see absolutely nothing when I press Ctrl-C. I'm using Linux linux 2.6.31-20-generic-pae #57-Ubuntu SMP Mon Feb 8 10:23:59 UTC 2010 i686 GNU/Linux

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >