Search Results

Search found 1353 results on 55 pages for 'emacs lisp'.

Page 24/55 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • How to move sub-headings to under other headings in emacs org-mode

    - by Mittenchops
    My list looks like this: * TODAY ** TODO Item 1 ** TODO Item 2 * TOMORROW ** TODO Item 3 ** TODO Item 4 ...as a single list, based on some advice I received here. I'd like to move TODO Item 2 from under TODAY to under TOMORROW. The manual says: M-up M-down Move the item including subitems up/down (swap with previous/next item of same indentation). If the list is ordered, renumbering is automatic. But while I can change the places of Item 1 and Item 2, I cannot move Item 2 outside of the Today heading---I cannot move it down under TOMORROW to proceed Item 3. The buffer tells me: cannot move past superior level or buffer limit org mode What is the keystroke that lets me move sub-items "past superior level" to under new headings?

    Read the article

  • emacs: inverse search

    - by Data
    Is there a way to do a inverse search? I have very big log file where a particular pattern fills up for few dozen pages 20100414 alpha beta 20100414 alpha beta <few dozen pages> 20100414 alpha beta 20100414 gamma delta 20100414 gamma delta <few dozen pages> 20100414 gamma delta Problem is, I don't know what text would be after "alpha beta". It could be "gamma delta" or something else. So I would like to skip all the lines that contain "alpha beta".

    Read the article

  • Clean way to perform commands in the Emacs minibuffer

    - by Christopher Monsanto
    Consider the following example: I want to read a file using ido from the minibuffer, but merge in all of the directories I use often. I can't just execute (ido-find-file) (ido-merge-work-directories) Because the second sexp will only execute after the user is finished selecting the file. The question then is: what is the best/cleanest way to execute commands in the minibuffer's command loop? The only way I know to do this is to bind my desired command to a key sequence, and add that sequence to unread-command-events so the key runs once we enter the minibuffer command loop: (setq unread-command-events (append (listify-key-sequence (kbd "M-s")) unread-command-events)) ; std key-binding for ido-merge-work-directories (ido-find-file) But that is very hacky, and I would like to know if there is a better solution. Thanks!

    Read the article

  • Emacs align-regexp on = but not ==

    - by Karl
    I am working in Haskell and frequently come across code similar to the following: func i j | i == j = i | otherwise = j I want to align on the '=' character using align-regexp but don't have the elisp knowhow. I have tried just doing " = " without the quotes, but this inserts an unwanted space character before each '='. I have found a proposed solution here but I can't seem to get that to do anything at all. Please help me write a function or hard-coded macro that will allow me to set a keybinding for this.

    Read the article

  • emacs split into 3 even windows

    - by Michael
    Hi all, Quick question: How do I specify the number of characters in a split window? C-x-3 Splits my window into two windows evenly, but a subsequent split will split one of the windows in half. I'd like 3 equal sized windows. The documentation says that I should be able to specify the number of characters for the left buffer as a parameter, but I cant seem to get that to work. Any ideas for syntax? Thanks.

    Read the article

  • emacs, unsplit a particular window split

    - by kindahero
    this may be stupid question, but I could not find direct solution to this. I often want to unsplit window as follows +--------------+-------------+ +--------------+-------------+ | | | | | | | | | | | | | | | | | | +--------------+ | --> | | | | | | | | | | | | | | | | | | | | | +--------------+-------------+ +--------------+-------------+ +--------------+--------------+ +-----------------------------+ | | | | | | | | | | | | | | | +--------------+--------------+ --> +-----------------------------+ | | | | | | | | | | | | +-----------------------------+ +-----------------------------+ currently, I start with ctrl-x 1 and then split vertically/horizontally. but my real qustion is how can one remove a particular window split with out disturbing the other window structure.? is there any elisp function in built.? hope I frame my question correctly

    Read the article

  • Icons in dired in Emacs (on Mac or Linux)

    - by Dave
    I'd like to have dired show a little icon next to each file, similar to what you'd see in "list" or "details" view on a graphical file browser. Someone posted a similar question but the only answer was for Windows only; I want to be able to do this on Linux or Mac.

    Read the article

  • emacs: interactively search open buffers

    - by Data
    Is there a way to search all the open buffers for a particular pattern. C-s interactively searches current buffer. Similarly, is there something, that searches all the open buffers. I know I can use "occur", but "Occur" brings a new buffer and changes/messes the buffer organization.

    Read the article

  • how to notify a program of another program? dll? directory? path?

    - by Brady Trainor
    I am trying to experiment with GNUS email in Emacs, in Windows (EDIT: x64 bit). I've got it to work in Ubuntu, but struggling with it in Windows. From http://www.gnu.org/software/emacs/manual/html_mono/emacs-gnutls.html#Help-For-Users I read in second paragraph: This is a little bit trickier on the W32 (Windows) platform, but if you have the GnuTLS DLLs (available from http://sourceforge.net/projects/ezwinports/files/ thanks to Eli Zaretskii) in the same directory as Emacs, you should be OK. I have downloaded and unzipped the gnutls-3.0.9-w32-bin package, but am not sure what to do with it. I have tried putting it in Program Files (x86), which is "the same directory as Emacs". I have tried putting it in the emacs-24.3 folder. I consider merging all the folders in between the two, but am hesitant as that seems a difficult troubleshoot attempt compared to my knowledge on these matters. I think Emacs needs to somehow see the gnutls binaries and/or dlls. My knowledge is limited on this. I've also struggled to understand PATHs for sometime now, and am not sure if that approach is relevant here. FYI, the emacs directory contains folders labeled bin, etc, info, leim, lisp and site-lisp. The gnutls directory contains folder labeled bin, include, lib and share. Hmm, now I'm finding lots of links on adding paths. Still, I'm skeptical that I would only add gnutls.exe path, as it seems the dlls are needed. Some additional data for Ramhound's first comment I have been attempting the (require 'gnutls) route. This seems to be the most relevant parts in the log: Opening connection to imap.gmail.com via tls... gnutls.c: [1] (Emacs) GnuTLS library not found Opening TLS connection to `imap.gmail.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com'...failed Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com --protocols ssl3'...failed Opening TLS connection with `openssl s_client -connect imap.gmail.com:993 -no_ssl2 -ign_eof'...failed Opening TLS connection to `imap.gmail.com'...failed I am not sure what "in stallion" means. Emacs seems to have installed itself in program files (x86), so I assume it is 32 bit. I can try and figure out how to double check, but did not realize I would get such fast response time, and am headed out right now. I will try merging the files later tonight?

    Read the article

  • XSLT and possible alternatives [on hold]

    - by wirrbel
    I had a look at XSLT for transforming one XML file into another one (HTML, etc.). Now while I see that there are benefits to XSLT (being a standardized and used tool) I am reluctant for a couple of reasons XSLT processors seem to be quite huge / resource hungry XML is a bad notation for programming and thats what XSLT is all about. It do not want to troll XSLT here though I just want to point out what I dislike about it to give you an idea of what I would expect from an alternative. Having some Lisp background I wonder whether there are better ways for tree-structure transformations based upon some lisp. I have seen references to DSSSL, sadly most links about DSSSL are dead so its already challenging to see some code that illustrates it. Is DSSSL still in use? I remember that I had installed openjade once when checking out docbook stuff. Jeff Atwood's blog post seems to hint upon using Ruby instead of XSLT. Are there any sane ways to do XML transformations similar to XSLT in a non-xml programming language? I would be open for input on Useful libraries for scripting languages that facilitate XML transformations especially (but not exclusively) lisp-like transformation languages, or Ruby, etc. A few things I found so far: A couple of places on the web have pointed out Linq as a possible alternative. Quite generally I any kind of classifications, also from those who have had the best XSLT experience. For scheme http://cs.brown.edu/~sk/Publications/Papers/Published/kk-sxslt/ and http://www.okmij.org/ftp/Scheme/xml.html

    Read the article

  • Exited Emacs without saving, did it save the file somewhere?

    - by rumtscho
    Hi, I am using Emacs on Windows XP. Had it open to take some notes in a meeting, but forgot to create a file first (the text got created in the usual "scratch" buffer). Then I closed a lot of applications after the meeting, forgetting to save the notes in Emacs :( I know that when I am modifying an existing file, it creates a backup of the old file in the same directory. But I don't know if the information from the scratch buffer is available somewhere after an exit without saving. Do you know if I can restore my information? I haven't shut down/suspended/hybernated the system since, so all temp files should be still accessible.

    Read the article

  • Emacs equivalent of this Vim command to run my tests?

    - by eightbitraptor
    I'm using Emacs at the moment and experimenting with it for my Rails development and there is one thing that I do quite regularly in Vim and I'd like to know if an equivalent exists in Emacs, or an alternative workflow to achieve the behavior that I need. The command in Vim is :map ;t :!rspec --no-color %<cr> Essentially this maps a key combination to run a bash/shell command on the file represented by the current buffer (% expands to the filename at runtime, the <cr> is just a carriage return at the end to execute the command). I map all sorts of random little commands as and when I need them and I really miss the immediacy of this approach. How can I achieve something similar?

    Read the article

  • F# vs Haskell vs Lisp - which language to learn?

    - by empi
    I've heard a lot about functional programming languages and I'm willing to learn one. I guess it will be mostly for fun, however, I hope it will improve my programming skills. I have mostly C#/.NET background, so my first choice is to learn F# (because of .NET and familiarity with Visual Studio). On the on other hand, I wonder if F# has features like Lisp macros or Haskell higher order functions. Could you compare F#, Haskell and Lisp? Which one will be the language of your choice?

    Read the article

  • changing .emacs to use IronPython.exe and using code completion for IronPython modules ?

    - by KaluSingh Gabbar
    I configured my Emacs for code completion and other help using this link (from another question here on SO). I am a complete newbie to emacs. Can anyone tell me what should I change so it (rope, ropemacs, pymacs, yasnippet etc) picks up symbols of IronPython modules for code completion and snippets. Also I want to map: C-x RET - to invoke IronPython.exe and not Python.exe (any clue on how to do that) PS I am using Emacs with Cygwin on XP machine

    Read the article

  • How do I stop Emacs automatically inserting hyphens at the beginning of new lines in fundamental fil

    - by Bryce Thomas
    Hi there, I'm jotting down some notes in Emacs in Fundamental Fill mode. I'm starting each one of my notes with a "-" on a new line. The problem is, whenever one of the notes I'm writing is too long to fit on a single line, it gets pushed down to the next line (which I want to happen) but Emacs goes ahead and automatically inserts another "-" for me out the front on the new line (which I don't want to happen). Is there a way to stop Emacs from exhibiting this "helpful" behaviour?

    Read the article

  • Setting up a non-emacs Common Lisp Dev Env for web application development?

    - by Ravi S
    I am trying to set up a Common Lisp Dev Env for web application development on my Ubuntu 10.04 LTS 64-bit box and I can't find a single decent guide that is targeted at noobs. The closest I came is with Peter Seibel's Lisp in a box but I detest Emacs with a passion and it seems to have older versions of SBCL and CLISP (which are my preferred CL implementations). I do not want to use any of the commercial implementations. I am looking for a simple setup to write some very basic CRUD apps involving possibly hunchentoot, some framework like weblocks,CL-WHO, CL-SQl, sqlite or some datastores from the nosql family like mongo and couch.. Assuming, I go with either SBCL or CLISP on Linux, what is the best tool to manage packages and libraries? ASDF? I am looking for simplicity and consistency and I don't expect to use a ton of libs...

    Read the article

  • Common Lisp implementation with CFFI and thread support on Mac, Windows, and Linux?

    - by mcandre
    Goal: Install Hunchentoot and be able to run Hunchentoot as a background thread. This is what I do: Install Common Lisp. Install Quicklisp. (ql:quickload "hunchentoot") (hunchentoot:start (make-instance 'hunchentoot:acceptor :port 4242)) The last command is supposed to start Hunchentoot, then return to the interpreter for further Common Lisp forms. For CLISP, SBCL, ABCL, ECL, and CCL, I get one of two results: Hunchentoot's dependency Bordeaux Threads fails to install. hunchentoot:start hangs. The web page never loads, and never 404s.

    Read the article

  • What is lisp used for today and where do you think it's going ?

    - by ldigas
    Never been a lisp user, so don't take me as too dense while reading this. But what is lisp used for today ? I know there are several variants of the language in existence, at least one which will keep it alive commercially for a while longer (AutoLisp, VisualLisp - pretty big support from Autodesk) ... but I don't meet everyday people using it. So if you can shed some light on the matter - what is it's primary target market nowadays ? And what do you believe its future will be ... will it become just another support language in few apps, or is it going somewhere ? Also, apart from "an editor whose name shall not be spoken" what other apps keep it as a support language ?

    Read the article

  • emacs/Python: running python-shell in line buffered vs. block buffered mode

    - by Begbie00
    Hi all - In a related question and answer here, someone hypothesized that python-shell within emacs(23.2) was block-buffered instead of line-buffered. The recommended fix was to add sys.stdout.flush() to the spot in my script where I want stdio to flush its contents to the python-shell. Is there someway to trick python-shell (running in emacs 23.2 on Windows, not Linux) into either a) thinking it's attached to a TTY or b) using line-buffered instead of block-buffered mode? I don't see why I'd be able to do this in IDLE but not emacs. I'd rather customize emacs than add sys.stdout.flush() throughout my scripts. Call me lazy :-). Thanks, Mike

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >