Search Results

Search found 2510 results on 101 pages for 'hp pavilion'.

Page 24/101 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• HP Pavillion dm3 (Windows 7) BSOD,

  - by Lee

  HI I have a HP Pavilion dm3. It came up with a BSOD and then didn't give me an option to start up in safe mode. I dont have any cd drive, nor did it come with a Windows cd anyway. I presume that it has a partition in my laptop for that kinda stuff. I was hoping to boot it using a usb but I don't know how to do it or where to download the stuff from. I have access to network computers, so am able to download from the internet but it's not a Windows7 computer. I am able to download from the computers that I have access to, but unable to run any executable files on them. Can someone please help? Thanks in advance

  Read the article

• VSTS Test Edition or HP's LoadRunner?

  - by Edward Leno

  I have had this debate with some peers off and on for a while. I am certified in the HP tools, but have been spending more and more time with VSTS Test Edition 2008. I am looking for opinions on what people think of the future of both products and how they compete. LoadRunner's strengths include its vast array of protocols supported. Unfortunately since HP took over from Mercury, they are beginning to lag behind, especially in the new internet spaces. VSTS Test, once very limited, is now quite impressive, especially in 2010. I don't know if it makes business sense, but I would love for VSTS Test to take on some additional protocols. Many of my clients would like to move away from HP and their licensing costs. Finally, I am looking for good resources for VSTS Test. I have been playing with it, but would like to see some dedicated courses/material, instead of just a part of the larger VSTS. Thanks!

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• HP laptop won't recognize wireless adapter

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. Is there some way, short of installing a new adapter, that I can work around this problem? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers. See this related question where I ask how to use an old Windows Mobile phone as a Wi-Fi (not cellular data) tether.

  Read the article

• Fedora 10 setting up HPLIP for HP Deskjet F4488

  - by Shyam

  I had set up a newly purchased HP F4488 using HPLIP, I installed it on my Fedora 10 desktop and it worked fine for the past 2 days. Suddenly, it is failing to print. The scanner works and the photocopier works. When a print job is initialized there is an error and the printer gets disabled. What is the problem? Is there anything that I should fix additionally to make it work?

  Read the article

• Enabling Hyper-V in HP Z800 BIOS

  - by fatcat1111

  I should be able to enable Hyper-V for my new HP Z800, but I simply cannot find the switch in BIOS. Does anybody know what they've called it this time?

  Read the article

• HP Envy screen brightness .. stuck

  - by Sonic Soul

  once in a while, the screen brightness stops responding to any reason, and stays on full brightness.. for those of you that have HP Envy, you know what this means... battery suicide. the FN+* controls don't work. i also tried going in to power settings and adjusting all modes brightness to low wend of spectrum, after saving, it has no effect.. i suppose i could try rebooting as i always just put my laptop to sleep :/ anyone came across this ?

  Read the article

• HP Envy screen brightness .. stuck

  - by Sonic Soul

  once in a while, the screen brightness stops responding to any reason, and stays on full brightness.. for those of you that have HP Envy, you know what this means... battery suicide. the FN+* controls don't work. i also tried going in to power settings and adjusting all modes brightness to low wend of spectrum, after saving, it has no effect.. i suppose i could try rebooting as i always just put my laptop to sleep :/ anyone came across this ?

  Read the article

• HP Usb storage Format tool : Error

  - by Srin

  I have a 2 GB Kingston Usb drive. This is working fine- I am able to format and access from 'My computer' I am trying to format this drive using HP USB Storage format tool to load a bootable image on to the drive, it says "device media is write protected" OS : Windows XP what could be wrong ? Thanks!

  Read the article

• HP 20gig iPod stuck on "AC Charge" icon

  - by Chris

  I have a HP edition iPod (20gig) and it is stuck on the "AC Charge" icon with the picture of the wall charger and an outlet. I tried to reset the device and it has been stuck on this icon for quite a while now. I have tried everything I can to try to reset it, and before I stoop to visiting an Apple store I want to see if anyone has any tricks up their sleeves. This is what the icon looks like:

  Read the article

• Looking for HP pivilion dv2-1117e XP drivers.

  - by Sajjad Kazmi

  Hi I have HP pivilion dv2-1117e entertainment nootbook.I have installed window XP but I don't have the vedio,audio,WLAN drivers Pleas help me and if possible informe me on "[email protected]" I shell be very thankful to you forever.

  Read the article

• HP ProBook 4540s CD/DVD Drive cannot Read Disks

  - by DavidB

  I seem to have a problem with the CD/DVD drive on my HP ProBook 4540s laptop. I cannot get it to read any disks. Normally, I would say that this is a hardware issue, but whenever I put a disk that previously could be read in the drive, it starts to make noise like it is trying to to read the disk but cannot and AnyDVD HD seems to be able to retrieve disk information with some struggle. Any ideas on what the problem could be?

  Read the article

• How do I use HP webcam in ubuntu ?

  - by Omkant

  I bought hp-notebook pc in which there was windows vista and webcam was properly working but now I have put ubuntu in my laptop and I want to use my webcam for video-chatting and general video recording and snapshots . Please advise me how should I use my webcam using any driver or software or package?

  Read the article

• HP Server Automation - agent misreporting hostname

  - by warren

  I've been using HP Server Automation for some time, but have noticed an interesting issue I'm hoping the SF community has seen / knows a workaround to. When the management agent on Solaris or RHEL (only platforms I've noticed it on) reports the hostname of the managed server, it does not return the value of hostname, it returns the first alias to that entry in /etc/hosts. Any ideas on how to get around that? Other than editing /etc/hosts so the alias is at the end of the line instead of the front?

  Read the article

• Alternative/mirror site for HP drivers

  - by Toro

  I'm not able to download any printer driver from the HP site. Is there an alternative or mirror site where drivers are just archived or cached?

  Read the article

• Connect Windows 7 to DP-300U (with attached HP 722C Printer)

  - by Jim Geurts

  Hey all, I'm trying to add a new printer to Windows 7, but it cannot find it. My printer is an HP 722C attached to a DLink DP-300U network adapter. I enter the ip address of the network adapter, but Windows 7 does not recognize the printer. Any advice to get this working?

  Read the article

• HP LaserJet 4250 Printer Networking Problems

  - by MHrappstead

  We've been trying to assign a static IP address to an HP LaserJet 4250 Printer. When we click on the networking tab it asks for a username and password, however it says the admin user is Unauthorized. We've tried IE 8, Firefox, and Chrome and have even updated the firmware to the latest version.

  Read the article

• Future raid update in a NAS and HP ProLiant alternatives

  - by edwardmlyte

  I'm thinking of buying the HP ProLiant MicroServer*. My question is if I just put a single 2TB drive, how easy would it be in the future to upgrade to a second 2TB drive in a RAID-1 setup? Can this be done without formatting the original 2TB drive? *It looks like the £100 cashback offer is stopping end of Aug, making this system cost around £260 without HDDs. Are there any other brands that anyone would recommend for all-in-one hardware solutions.

  Read the article

• HP server delayed boot

  - by jjrab

  I'm currently using HP Proliant DL120 G5 servers running VMWare ESXi 4 to run server VM's. They are connecting to an iSCSI SAN for the shared storage. I'd like to implement a delayed boot of these hosts servers so that they don't boot up and try to connect to the SAN before the SAN is ready for connections after a power failure. Does anyone know of a good way to do this?

  Read the article

• Directly connected HP server and CX4 with fibre

  - by Ulysses Mpasdekis

  I have direcly connected (with fibre) a HP ProLiant BL460c G7 with a EMC CX4. I installed VMWare Esxi 5.0. The problem is that cx4 cannot connect to the blade. It seems that there is no connectivity problem, because the server can be connected to fibre switch with other equipment (EVA 4000) and also cx4 is already atteched to one same server. The problem seems to exist somewhere between the cx4 and esxi when they are direclty attached. Any ideas??

  Read the article

• HP does not power off after shutdown (Vista)

  - by tommi

  My HP d330 does not properly shutdown, after Vista "shutting down" message the lcd screen goes black, but both HD + Power Leds remain on.. Any ideas? No entries in EventViewer about this. Keyboard leds no more work after this partial shutdown so I assume hardware is partially shutdown..? Same problem occurs when I choose Sleep from shutdown menu

  Read the article

• Z600 Workstation ACPI Fan Noise

  - by dpb

  Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

  Read the article

• Installazione ATI Mobility Radeon HD 5650 su Ubuntu 11.10

  - by Antonio

  Salve a tutti, possiedo un portatile HP Pavillion dv6 3110 con scheda video dedicata ATI Mobility Radeon HD 5650 da 1 Giga ed ho installato da poco Ubuntu 11.10 Versione 64 bit. Ho seguito molte guide su internet per installare i driver per la mia scheda video ma nessuna ha dato esito positivo. Nella finestra "driver aggiuntivi" sono riuscito ad installare i "Driver grafici fglrx proprietari ATI/AMD" ma dopo il riavvio non riesco ad utilizzare correttamente la scheda video. Mentre i "Driver grafici fglrx proprietari ATI/AMD (aggiornamenti post-release)" non me li fa proprio installare segnalando un errore che riporto di seguito "L'installazione di questo driver non è riuscita.Consultare i file di registro per maggiori informazioni: /var/log/jockey.log". Ho pensato allora di scaricare direttamente dal sito di AMD gli ultimi driver rilasciati attraverso il pacchetto "amd-driver-installer-12-3-x86.x86_64.run", l'ho lanciato, ho seguito il wizard di installazione, l'installazione viene completata, digito "sudo aticonfig --initial" per la configurazione iniziale, ma al riavvio del pc appaiono soltanto scritte su schermo nero con una serie di "OK" e qualche "FAIL". Ho provato questa procedura anche per le versioni precedenti dei driver, ma il risultato è sempre lo stesso. Sono disperato. Riuscirò mai ad utilizzare la mia scheda video? Vi incollo per completezza ciò che mi appare all'esecuzione del comando "lspci -nn | grep VGA" per visualizzare i processori grafici presenti sul mio pc: 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] [1002:68c1] Grazie anticipatamente a coloro che potranno aiutarmi. Cordiali Saluti Antonio Giordano

  Read the article

• Laptop drains of quickly with battery

  - by Shyam

  I am a user since years in ubuntu and I have not come across this problem with ubuntu till date. My battery drains off immediately after I unplug my AC power. The options I tried: 1) checked the battery state with : cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charged present rate: 0 mA remaining capacity: 392 mAh present voltage: 12476 mV Initially it was showing charging state: charging after 5mins it started displaying as charged. ! Based on that if I remove my AC Power it shows low battery notification. 2) When I run acpi : acpi -b Battery 0: Unknown, 9% The battery state shows as unknown. But initially when we plug-in to AC adapter acpi -b Battery 0: Charging, 9%, 13:04:00 until charged 3) When the check the same with : upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0A:00/power_supply/BAT0 vendor: HP power supply: yes updated: Thu Nov 1 16:06:40 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 4.2336 Wh energy-empty: 0 Wh energy-full: 33.1128 Wh energy-full-design: 33.1128 Wh energy-rate: 5.6052 W voltage: 12.474 V time to full: 5.2 hours percentage: 12.7854% capacity: 100% technology: lithium-ion Is the power stats output, It says 5hrs to charge completely, If I charge it even more than 5hrs and unplug the AC power, It again cribs stating LOW BATTERY !! The same thing does not happen with Windows7. Any suggestions/ help will be greatly appreciated.

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >