Search Results

Search found 978 results on 40 pages for 'nobody'.

Page 24/40 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Are there new flexible texteditors? [closed]

    - by RParadox
    Vi(m) and Emacs are almost 40 years old. Why are they still the standard, and what attempts have been made at coming up with a new flexible editor? Are there any features which can not be built into vim/emacs? My question is similar to this one: Time to drop Emacs and vi? No one had a suggestion, which surprises me. I would have thought that the core of a texteditor is very small and that people brew their own. Perhaps nobody wants to deal with supporting all the modes? Edit to clarify my question: Instead of writing modes and scripts I ask myself, why there is not a much lightweight project, which lets people custom the editor more directly? Vim has 365395 LOC (C lines all included), Emacs 1.5 million LOC. Why is there a project with say 50k LOC, which is the core, why people can use more freely? Perhaps there is such project, I haven't looked very far. I thought about putting together modules from Vim myself and experimenting with some ideas. The core of editing shouldn't be more than 10k? Vim has a lot optimizations which is really an overkill nowadays. Basically I'm looking for a code base for my own editor and Vi/Emacs are I believe not intended to be used in this way. Bill Joy said the following about vi. http://web.cecs.pdx.edu/~kirkenda/joy84.html The fundamental problem with vi is that it doesn't have a mouse and therefore you've got all these commands. In some sense, its backwards from the kind of thing you'd get from a mouse-oriented thing. I think multiple levels of undo would be wonderful, too. But fundamentally, vi is still ed inside. You can't really fool it. Its like one of those pinatas - things that have candy inside but has layer after layer of paper mache on top. It doesn't really have a unified concept. I think if I were going to go back - I wouldn't go back, but start over again.

    Read the article

  • Strangling the life out of Software Testing

    - by MarkPearl
    I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

    Read the article

  • xinetd 'connection reset by peer'

    - by ceejayoz
    I'm using percona-clustercheck (which comes with Percona's XtraDB Cluster packages) with xinetd and I'm getting an error when trying to curl the clustercheck service. /usr/bin/clustercheck: #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="clustercheckuser" MYSQL_PASSWORD="clustercheckpassword!" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" exit 0 else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" exit 1 fi /etc/xinetd.mysqlchk: # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID only_from = 10.0.0.0/8 127.0.0.1 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } When attempting to curl the service, I get a valid response (HTTP 200, text) but a 'connection reset by peer' notice at the end: HTTP/1.1 200 OK Content-Type: text/plain Percona XtraDB Cluster Node is synced. curl: (56) Recv failure: Connection reset by peer Unfortunately, Amazon ELB appears to see this as a failed check, not a succeeded one. How can I get clustercheck to exit gracefully in a manner that curl doesn't see a connection failure?

    Read the article

  • Two-way Trust relationship between Samba 3 and AD 2008 R2

    - by Romain
    Did somebody already make a two-way trust relationship between Samba 3 and AD ? I've got Samba 3.5 domain (ES02) controller and AD 2008 R2 domain (ES01) controller. Trust domain seems to be ok: Trusted domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 Trusting domains list: ES01 S-1-5-21-1816646249-803782145-3669927669 I can login AD domain workstation with a Samba user account and access to AD domain workstation shares from Samba workstation with Samba user account. BUT, when I try to access to Samba domain workstation shares from AD domain workstation with AD account (test), I've got this: [2012/12/16 23:00:26.146090, 5] auth/auth.c:268(check_ntlm_password) check_ntlm_password: winbind authentication for user [test] FAILED with error NT_STATUS_NO_SUCH_USER [2012/12/16 23:00:26.146123, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [test] - [test] FAILED with error NT_STATUS_NO_SUCH_USER When I try to access samba share with the Administrator account that I create on both side with same password, I've got this: [2012/12/16 22:57:22.701841, 1] rpc_server/srv_pipe_hnd.c:1602(serverinfo_to_SamInfo_base) _netr_LogonSamLogon: user ES01\Administrator has user sid S-1-5-21-1816646249-803782145-3669927669-500 but group sid S-1-5-21-3405883886-2425668597-4100599511-513. The conflicting domain portions are not supported for NETLOGON calls I don't know if winbind is working because of this: wbinfo -u root nobody smb3user administrator "wbinfo -u" should list all local and trusted users, no ? Any fresh idea would be appreciated, I've been reading all the Internet for 1 week... Regards,

    Read the article

  • OSX esc key stops working (randomly)

    - by Jan Hancic
    I have a 2011 macbook Air with OS X Mountain Lion (I've upgraded from Lion). And ever since upgrading my escape key randomly stops working. And it's not that the keyboard on the laptop would be damaged as the same happens if I use apple's bluetooth keyboard. So I'm guessing it's a software issue. Also in some cases pressing ctrl+esc achieves the same thing as just esc so I'm 100% it's not a hardware problem. Does anybody have any idea what this might be all about and how to fix it? edit: the escape key stops working completely but it starts working again after I restart the computer. edit2: this usually happens after the computer wakes from sleep. So it's not like that is just stopps working in the middle of using it, but rather after I put it to sleep (or just close the lid) and then open it again. Has nobody got the same issue? Is there a better place to ask OSX related questions than SuperUser maybe?

    Read the article

  • administrator user unable to login, suspicious user accounts "sky$", "admin$"

    - by mks
    I have a Windows 2008 R2 Standard (64 bit) running in a virtual machine. Suddenly from yesterday onwards I am not able to login as administrator. Nobody changed the password. Both in the console as well as using remote desktop I am unable to login. Whenever I login as Administrator I am getting this error: "The user name or password is incorrect" Nothing has changed in the machine and I have logged in the past successfully both through console and via remote desktop several time on the same machine. One strange behaviour I noticed is, I am seeing some additional user accounts if I try to login as other user. The suspicious user account are: sky$ admin$ SUPPORT_388945a0 Is it created by some malware/virus? Or is it some windows hidden account? Microsoft site says that SUPPORT_388945a0 is: The Support_388945a0 account enables Help and Support Service interoperability with signed scripts. This account is primarily used to control access to signed scripts that are accessible from within Help and Support Services. Administrators can use this account to delegate the ability for an ordinary user, who does not have administrative access over a computer, to run signed scripts from links embedded within Help and Support Services. These scripts can be programmed to use the Support_388945a0 account credentials instead of the user’s credentials to perform specific administrative operations on the local computer that otherwise would not be supported by the ordinary user’s account. When the delegated user clicks on a link in Help and Support Services, the script executes under the security context of the Support_388945a0 account. This account has limited access to the computer and is disabled by default. However I am not sure from where this "admin$" and "sky$" came. Anyone has similar experience?

    Read the article

  • Thunderbird doesn't show folders on a new Dovecot install

    - by Zoran Zaric
    Hey, I set up a new mailserver with postfix and Dovecot some days ago, everything is working except for Thunderbird not showing any folders. Evolution shows me all folders. I migrated from a Courier install using imapsync. In the filesystem the folders don't have a INBOX in their name, so the tho folders ar called .Folder 1 not .INBOX.Folder 1. This is the output of dovecot -n: # 1.0.10: /etc/dovecot/dovecot.conf Warning: mail_extra_groups setting was often used insecurely so it is now deprecated, use mail_access_groups or mail_privileged_group instead base_dir: /var/run/dovecot/ log_timestamp: “%Y-%m-%d %H:%M:%S ” protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 1001 last_valid_uid: 1001 mail_extra_groups: vmail mail_access_groups: vmail mail_location: maildir:/var/vmail/%d/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail Thanks!

    Read the article

  • Delay before download starts when serving files using nginx

    - by glumbo
    I am currently using nginx to serve downloads off my website. Users sometimes need to wait about 5 seconds before their download starts after clicking a download link. I'm not sure if I need to start using raid 10 (I'm currently using raid 50) or if this is a problem with my nginx configuration. I am also on a 1gbit line but download sometimes go as low as 10kB/s. My server: Dual Xeon 5620 CPU, 12x2TB drives with 8GB ram. This is my nginx.conf #user nobody; worker_processes 12; worker_rlimit_nofile 10240; worker_rlimit_sigpending 32768; error_log logs/error.log crit; #pid logs/nginx.pid; events { worker_connections 2048; } http { include mime.types; default_type application/octet-stream; access_log off; limit_conn_log_level info; log_format xfs '$arg_id|$arg_usr|$remote_addr|$body_bytes_sent|$status'; #sendfile on; #tcp_nopush on; reset_timedout_connection on; server_tokens off; autoindex off; keepalive_timeout 0; #keepalive_timeout 65; limit_zone one $binary_remote_addr 10m; perl_modules perl; perl_require download.pm;

    Read the article

  • Using virtual IP with stunnel and haproxy

    - by beardtwizzle
    Hi there, We have a load-balancer setup, in which an HTTPS Request flows through the following steps:- Client -> DNS -> stunnel on Load-Balancer -> HAProxy on LB -> Web-Server This setup works perfectly when stunnel is listening to the local IP of the Load-Balancer. However in our setup we have 2 load-balancers and we want to be able to listen to a virtual IP, which only ever exists on one LB at a time (keepalived flips the IP to the second LB if the first one falls over). HAProxy has no problem in doing this (and I can ping the assigned virtual IP on the load-balancer I'm testing), but it seems stunnel hates the concept. Has anyone achieved this before (below is my stunnel config - as you can see I'm actually listening for ALL traffic on 443):- cert= /etc/ssl/certs/mycert.crt key = /etc/ssl/certs/mykey.key ;setuid = nobody ;setgid = nogroup pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=443 connect=127.0.0.1:8443 TIMEOUTclose=0 xforwardedfor=yes Sorry for the long-winded question!

    Read the article

  • process and memory issue on linux server

    - by zapping
    Need some assistance in analyzing apache and php process running on linux server. Its a 8-core intel processor with 4GB ram. When the website on it runs the top displays like this. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23459 username1 16 0 151m 27m 8388 S 11.3 0.7 0:11.71 php5 23730 username1 16 0 151m 28m 8388 S 11.3 0.7 0:03.87 php5 23458 username1 16 0 151m 28m 8388 S 3.0 0.7 0:19.20 php5 16202 mysql 15 0 459m 38m 4624 S 0.7 1.0 62:33.81 mysqld 24141 nobody 15 0 311m 5832 2304 S 0.3 0.1 0:00.03 httpd Why does the command say php5 when the website is accessed. Both apache and php was preconfigured so not sure whats done there. Tried setting up the same site and db on a different server but on it the process shows httpd always and not php5. The site uses mysql db. The problem is server load seems to go till about 5.x when the website was access by about 16users. When the free -m command was given the output shows total used free shared buffers cached Mem: 3941 3727 213 0 236 2734 -/+ buffers/cache: 756 3184 Swap: 4095 0 4095 Lots of memory seems to be in cache and free memory is less. Even when the website is not accessed that is leaving it very much idle for about 2days the free memory showed just 190. When the site is accessed the free memory seems to be go till 90mb then it increases to about 150mb. It always seems to remain just about 200mb. Is it somehow related to the server load showing 5.x. Will adding some more RAM resolve the load issue?

    Read the article

  • Can't boot flash drive on GIGABYTE motherboard

    - by Deltik
    Situation When I try to boot from my flash drive, my GIGABYTE 970A-UD3 motherboard returns this: Loading Operating System ... Boot error All other motherboards I've tried support booting from that flash drive (and a backup flash drive). The operating systems I tried on both flash drives were created with usb-creator-gtk (Ubuntu USB Startup Disk Creator). I know that the motherboard understands that there is an operating system on the flash drives because when I erase them, it complains in an ALL CAPS RAGE that there isn't an operating system, which is correct. How can I boot a flash drive that's bootable from other motherboards on this motherboard? Qualification This question is not a duplicate of this one because directly writing to the flash drive as an ISO 9660 (dd if=operating_system.iso of=/dev/sdb) still does not have the motherboard recognize the operating system. This question should be a duplicate of this one because I provide more information not provided by that poster. This forum thread has broken links and does not have a solution to my problem. Nobody knows what's going on in this forum thread.

    Read the article

  • Samba 3.5 Shadow Copy for Windows 7

    - by Prashanth Sundaram
    Over the past several days I have been trying to get the shadow to work with samba but haven’t been successful. Can someone check below config and let me know if I am missing something? We are using Equallogic SAN and iSCSI LUNS to mount volumes. I can cleanly access samba shares on Windows 7 clients but just not shadow copy. I have referred the official how-to but couldn’t get it to work. I see these messages in the logs. Any help is deeply appreciated. [2012/10/31 12:20:53.549863, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. [2012/10/31 12:21:13.887198, 0] modules/vfs_shadow_copy2.c:734(shadow_copy2_get_shadow_copy2_data) shadow:snapdir not found for /fs/test-01 in get_shadow_copy_data [2012/10/31 12:21:13.887265, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. == Samba pkgs == samba-3.5.10-116.el6_2.x86_64 samba-common-3.5.10-116.el6_2.x86_64 samba-winbind-clients-3.5.10-116.el6_2.x86_64 samba-client-3.5.10-116.el6_2.x86_64 === df –h == First is the iSCSI LUN and 2 others are snapshots. /dev/mapper/eql-0-fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01 /dev/mapper/eql-2-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.26-17.32.42/fs/test-01 (SNAPSHOT-1) /dev/mapper/eql-d-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.31-11.52.42/fs/test-01 (SNAPSHOT- 2) ===/etc/samba/smb.conf === [global] workgroup = DOMAIN server string = Samba Server Version %v security = ads realm = DOMAIN.CORP encrypt passwords = yes guest account = nobody map to guest = bad uid log file = /var/log/samba/%m.log domain master = no local master = no preferred master = no os level = 0 load printers = no show add printer wizard = no printable = no printcap name = /dev/null disable spoolss = yes follow symlinks = yes wide links = yes unix extensions = no [test] comment = Test Directories path = /fs/test-01 vfs objects = shadow_copy2 #shadow_copy2: sort = desc #shadow: localtime = yes #shadow: snapdir = /fs/test-01/test #shadow: basedir = /fs/test-01 guest ok = yes writeable = yes map archive = no force create mode = 0660 force directory mode = 2770 inherit owner = yes inherit permissions = yes All feedback is welcome. Thanks!

    Read the article

  • Solaris ldap Authentication

    - by Tman
    Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

    Read the article

  • Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

    - by BryCoBat
    I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

    Read the article

  • Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

    - by JohnnyVegas
    I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

    Read the article

  • Postfix SASL Authentication using PAM_Python

    - by Christian Joudrey
    Cross-post from: http://stackoverflow.com/questions/4337995/postfix-sasl-authentication-using-pam-python Hey guys, I just set up a Postfix server in Ubuntu and I want to add SASL authentication using PAM_Python. I've compiled pam_python.so and made sure that it is in /lib/security. I've also added created the /etc/pam.d/smtp file and added: auth required pam_python.so test.py The test.py file has been placed in /lib/security and contains: # # Duplicates pam_permit.c # DEFAULT_USER = "nobody" def pam_sm_authenticate(pamh, flags, argv): try: user = pamh.get_user(None) except pamh.exception, e: return e.pam_result if user == None: pam.user = DEFAULT_USER return pamh.PAM_SUCCESS def pam_sm_setcred(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_acct_mgmt(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_open_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_close_session(pamh, flags, argv): return pamh.PAM_SUCCESS def pam_sm_chauthtok(pamh, flags, argv): return pamh.PAM_SUCCESS When I test the authentication using auth plain amltbXkAamltbXkAcmVhbC1zZWNyZXQ= I get the following response: 535 5.7.8 Error: authentication failed: no mechanism available In the postfix logs I have this: Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication problem: unknown password verifier Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: SASL authentication failure: Password verification failed Dec 2 00:37:19 duo postfix/smtpd[16487]: warning: localhost.localdomain[127.0.0.1]: SASL plain authentication failed: no mechanism available Any ideas? tl;dr Anyone have step by step instructions on how to set up PAM_Python with Postfix? Christian

    Read the article

  • Scheduled task does not run on WIndows 2003 server on VMWare unattened, runs fine otherwise

    - by lnm
    Scheduled task does not run on Windows 2003 server on VMWare. The same setup runs fine on standalone server. Test below explains the problem. We really need to run a more complex bat file, but this shows the issue. I have a bat file that copies a file from server A to server B. I use full path name, no drive mapping. Runs fine on server B from command prompt. I created a task that runs this bat file under a domain id with password that is part of administrator group on both servers. Task runs fine from Scheduled task screen, and as a scheduled task as long as somebody is logged into the server. If nobody is logged in, the task does not run. There is no error message in Task Scheduler log, just an entry that the task started, bit no entry for finish or an error code. To add insult to injury, if the task copies a file in the opposite direction, from server B to server A, it runs fine as a scheduled unattended task. If I copy a file from server B to server B, the task also runs fine unattended, I recreated exactly the same setup on a standalone server. No issues at all. I checked obvious things like the task has "run only as logged in" unchecked, domain id has run as a batch job privilege and logon rights, Task Scheduler service runs as a local system, automatic start. Any suggestions?

    Read the article

  • samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

    - by Sylvain Huard
    I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

    Read the article

  • Why is /usr/bin/env permission denied to rails server?

    - by Eric Hopkins
    I've just set up rails on an apache server running on Ubuntu, and when I try to go to the root page it gives this error: /usr/bin/env: bash: Permission denied env and all the directories in the path all have permissions 755. I tried setting env to have permissions 777 but still got the same error. Rails is running as "nobody". Why is this happening? I don't know what else to try. In /etc/apache2/sites-available/api.conf: <VirtualHost *:80> ServerName api.thinknation.ca ServerAlias api.thinknation.ca DocumentRoot /var/www/api/public ErrorLog /var/www/logs/error.log CustomLog /var/www/logs/access.log combined RailsSpawnMethod smart <Directory /var/www/api/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews -Indexes # Uncomment this if you're on Apache >= 2.4: Order allow,deny Allow from all #Require all granted </Directory> </VirtualHost> From config/database.yml in my rails directory (with sensitive user names and passwords omitted): default: &default adapter: mysql2 encoding: utf8 pool: 5 username: root password: socket: /var/run/mysqld/mysqld.sock development: <<: *default database: api_development test: <<: *default database: api_test production: <<: *default url: <%= ENV['DATABASE_URL'] %> database: api username: ------------ password: ------------ Not sure what other details or files are relevant, I will add them if needed.

    Read the article

  • How can I disable the CTRL-ALT-DEL key combination completely on XP/Vista/7?

    - by Travesty3
    I have been googling extensively to figure this out, and nobody seems to be able to give a direct answer. Let me start by saying that I'm NOT talking about requiring CTRL-ALT-DEL to enter logon information. I'm working on a golf simulator program which is used at golf centers. I need the ability to completely disable the CTRL-ALT-DEL key sequence so that the golf center customers can't get out of the program and access the computer at all. I realize there are other key combinations that need to be handled as well, we already have this entire feature working in XP, but we're going to be switching to Windows 7 soon, and CTRL-ALT-DEL is the only one that doesn't seem to work in Win7. I'd really like an all-around solution if at all possible. This same program may also be installed on a client's personal computer for an in-home golf simulator, but the computers that really need this feature (golf center computers) are provided to the golf center by us, so would the best option be to write a new shell? I don't know anything about that at all, other than others that suggest writing a new shell for kiosk mode. I'd really like a simpler option, like modifying the registry in some way. I have heard that you can remove some buttons from the menu screen that pops up, but unless I can remove pretty much all of them (including the shutdown/restart button in the bottom-right corner), this won't be enough of a solution for me. Thanks for taking the time to read this and thanks again for any help you could provide! -Travis

    Read the article

  • What are some alternatives to word processing with Markdown?

    - by Hassan
    I've used MS Word-style editors for a long time, but I never got used to how unintuitive and cumbersome they are. I'm not talking specifically about MS Word, but also other editors that seem to mimic Word, like OpenOffice, NeoOffice, etc. I've found myself preferring to write in Markdown (much like on this site). I've found a few good Markdown editors, and I like using them a lot more than using Word-style editors. Here is what they generally look like: As you can see, it works much differently than a Word-style editor. This is a generally cleaner way of writing, since formatting is done right in the text, and is extremely simple to use (no highlighting some text, then clicking a button in some menu you have to find). Although editing text this way is great, I've realized that the syntax can only be used for very specific needs (bullets, numbered lists, headings and sub-headings, bold, italic, and some other common ones). However, many features are missing. Here are some features that would be nice in a word processor: Tables. Indenting paragraphs. Good image support (you can link to images, but not add them, since Markdown is just text). More simple to use than Word and its cronies. Cross-platform. Some of these can be fixed with in-line HTML, but nobody wants to do that. It seems Markdown was designed for editing text on the internet. Is there a similar setup that works better for desktop word processors?

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • Reducing IO caused by nginx

    - by glumbo
    I have a lot of free RAM but my IO is always 100 %util or very close. What ways can I reduce IO by using more RAM? My iotop shows nginx worker processes with the highest io rate. This is a file server serving files ranging from 1mb to 2gb. Here is my nginx.conf #user nobody; worker_processes 32; worker_rlimit_nofile 10240; worker_rlimit_sigpending 32768; error_log logs/error.log crit; #pid logs/nginx.pid; events { worker_connections 51200; } http { include mime.types; default_type application/octet-stream; access_log off; limit_conn_log_level info; log_format xfs '$arg_id|$arg_usr|$remote_addr|$body_bytes_sent|$status'; sendfile off; tcp_nopush off; tcp_nodelay on; directio 4m; output_buffers 3 512k; reset_timedout_connection on; open_file_cache max=5000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; client_body_buffer_size 32k; server_tokens off; autoindex off; keepalive_timeout 0; #keepalive_timeout 65;

    Read the article

  • OpenVPN: ERROR: could not read Auth username from stdin

    - by user56231
    I managed to setup openvpn but now I want to integrate a user/pass authentication method so, even though I haven't added the auth-nocache in the server config, whenever I try to connect it returns with the following message on the client side: ERROR: could not read Auth username from stdin My server.conf file contains basic stuff, everything works up untill I try to implement this for of authentication. mode server dev tun proto tcp port 1194 keepalive 10 120 plugin /usr/lib/openvpn/openvpn-auth-pam.so login client-cert-not-required username-as-common-name auth-user-pass-verify /etc/openvpn/auth.pl via-env ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun #persist-local-ip status openvpn-status.log verb 3 client-to-client push "redirect-gateway def1" push "dhcp-option DNS 10.8.0.1" log-append /var/log/openvpn comp-lzo I searched all over the net for a solution and all answers seems to be related to the auth-nocache param which I haven't set. The directive auth-user-pass-verify /etc/openvpn/auth.pl via-env points to a script which is executed to perform the authentication. A false authentication should result in a exit 1 while a true one should result with exit 0. For testing, that script auth.pl returns exit 0 no matter what the input is but it seems that the file is not executed before the error raises. auth.pl file contents: #!/usr/bin/perl my $user = $ENV{username}; my $passwd = $ENV{password}; printf("$user : $passwd\n"); exit 0; Any ideas?

    Read the article

  • scp No such file or directory

    - by Joe
    I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >