Search Results

Search found 913 results on 37 pages for 'rebooting'.

Page 24/37 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Can't boot to Windows 7 after installing Ubuntu 11.10

  - by les02jen17

  Here's what happened: I have 2 HDDs. 1st HDD is partitioned like this: C - Windows 7 D* - Empty drive where I installed Ubuntu E - Personal Files F - Personal Files 2nd HDD is partitioned like this: G - Personal Files *the D partition is originally part of the C partition. I resized it (using Easus Partition Master in Windows) and defragged it prior to installing Ubuntu. I installed Ubuntu by booting to the Ubuntu Secure Remix CD, and chose the D partition to install Ubuntu. I did not create a swap drive, and I mounted the / to the D partition. I didnt know where to mount the others, so I just thought by mounting the / to D, it would be okay. After the long installation, upon rebooting, I can't access Windows AND Ubuntu. I get an infinite bootloop and eventually the choices to boot to Safe Modes, Last Known Good Configuration and Start Windows normally. After failing in all of them, I placed the CD back and ran the Boot Repair. I chose the MBR 1st, it didn't work. I then chose the GRUB 2nd and now I was able to boot to the Ubuntu I installed, but not to my Windows 7! I'm using my newly installed Ubuntu while writing this. I hope you can help me. I did the best I could! Here's the link to the boot repair log: http://paste.ubuntu.com/919354/ Thanks in advance!

  Read the article

• Help trying/downloading ubuntu

  - by koolomwee

  I can't try ubuntu. Every time i put in my disk and press try, it shows the ubuntu sign with the dots under it than it shows a command screen basically blinking saying that it closed and canceled applications belonging to ubuntu... Than I tried to download it from the disk... same thing. Than, because I have windows, I tried to download it from the website and it worked. I rebooted my computer and went into the Ubuntu option just to find a blinking command screen again... How do I get ubuntu to work? What does happen (with the command screen) is that it shows commands that are blinking to fast for me to read the whole thing, and then it stops after like a minute or two of blinking. The only thing I do get to read is that Ubuntu commanded some applications to shut down. In the CD one it only has like 5 error messages, and when I reboot and select Ubuntu, there are over a hundred error messages. With the live-cd I have to shut down my computer to use it again. With the reboot and clicking ubuntu option it reboots by itself. I expect it to actually start up with no error messages. UPDATE I've been trying to start Ubuntu for the last couple of days, and I noticed on my last try that it said "SIGNAL 15 RECEIVED"... It also said that it's stopping Bluetooth and all other programs, and that its rebooting Maybe that'll help a little with answering my question... thanks :) this also might help: computer brand/model: HP Windows 7 Home Premium Service Pack 1, HPE240f graphics card: ATI Radeon HD 5570 I also wrote the same question here: https://answers.launchpad.net/wubi/+question/194537 might help a little more with information

  Read the article

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

• Ubuntu 12.04 "stuttering"

  - by Totte

  When I log in to the desktop Ubuntu seems to "stutter". Doing pretty much anything causes the cursor to freeze for a few seconds, and the rest of the screen updates something like every 15 seconds (during these 15 seconds I can still move the cursor). For example, opening the home folder I first see no effect, followed by a semi-transparent home folder, and finally the folder as it should be (this can take like 30 seconds); no animation, just three individual frames. Also, I sometimes don't see a window for a program, even though the program in question is supposed to be "up". Since this is my first experience of Linux, I confess I have no idea where to start - searching the web I only found problems with complete freezes/crashes requiring rebooting, as opposed to this "stuttering". I installed Ubuntu 12.04 32bit from a bootable USB stick a couple of days ago, right after a fresh Vista 32bit install. Thinking the stuttering might stop if I updated Ubuntu, I managed to install approx 270 updates through the Update Manager, but the stuttering was still there. Apart from the updates, I haven't installed any software other than what was included on the bootable USB stick. Vista and Ubuntu are on a single Crucial m4 SSD, in a dual-boot setup, with GRUB. CPU: Intel Core 2 Quad Q6600 GPU: Nvidia GeForce 8800 GTX (with the recommended proprietary drivers) RAM: 2GB DDR2

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• How do I get my internal HDD to mount at startup?

  - by el_gallo_azul

  It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

  Read the article

• Upgraded from ubuntu 12.04 to 12.10 issues

  - by ubuntu novice user

  I recently upgraded 12.04 to 12.10 ubuntu and then all hell broke loose. Being more specific, I have a Compaq machine and its hard disk is partitioned into 3 parts, so when I installed Ubuntu 10.04, I installed it in windows, since then have upgraded with each new ubuntu release via the update manager without any problems. I have installed the 64 bit versions. 12.10 downloaded via update manager, and initial downloading of packages was without problems, however, as it tried to install the packages, error messages appeared. The first was one about missing lib files, but I clicked to continue, since I am a relative novice on ubuntu. It continued, and during the restart process, when it was powering down, the computer hanged on the shutting down bit without rebooting for more than half an hour, so I manually shut down the machine and restarted it. Then a new error message appeared stating could not find disk, and I hit the manual fix option, and it now boots to an empty ubuntu desktop with my wallpaper but no launcher and the graphics appears as if this was put on a 640 x 480 resolution, and the screen no longer fits onto my 19" LCD. I had to use Ctrl-Alt-T to log out and then restart from there. How can I resolve this issue. Please help!

  Read the article

• Growing your VirtualBox Virtual Disk

  - by Fat Bloke

  Don't you just hate it when this happens: Fortunately, if you're running inside VirtualBox, you can resize your virtual disk and magically make your guest have a bigger disk very easily. There are 2 steps to doing this... 1. Resize the virtual disk Use the VBoxManage command line tool to extend the size of the Virtual Disk, specifying the path to the disk and the size in MB: VBoxManage modifyhd <uuid>|<filename> [--type normal|writethrough|immutable|shareable| readonly|multiattach] [--autoreset on|off] [--compact] [--resize <megabytes>|--resizebyte <bytes>]   If you booted up your guest at this point, the extra space is seen as an unformatted area on the disk, like this: So we now need to tell the guest about the extra space available. 2. Extend the guest's partition to use the extra space How you do this step depends on you guest OS type and the tools you have available. Linux guests often include the excellent gparted partition editor, whereas Windows 7 and 8 provide the Computer Management tool which can resize partitions. Unfortunately, my Windows XP vm has no such tool. But I do have a couple of other options: Most Linux installable .isos include the aforementioned gparted tool, so I could simply attach, say, an Ubuntu.iso as a Virtual CD/DVD in my Windows XP vm and boot off that. Then use gparted to extend the Windows XP partition, before finally rebooting. But I took another route and attached my resized virtual disk to a Windows Server 2012 vm I had lying around. Then I used the Computer Management tool in Windows Server 2012 to extend the partition of the Windows XP disk, before shutting down, unplugging the disk and reattaching to my Windows XP vm. (Note that if your vm's use different disk controllers, Windows will check the disks on booting). When I finally boot up my Windows XP guest I see the available disk space and all is well. At least until the next time - FB 

  Read the article

• ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

  - by GruffTech

  Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

  Read the article

• Alternate way to create a clone of a UNIX System

  - by Spirit

  THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

  Read the article

• Silverlight 4 crashing every browser (SL3 doesn't)

  - by Simon_Weaver

  I am testing my application on a number of machines. It is fine on every machine except 1. I'm having problems with one XP machine where in internet explorer, chrome and firefox the Silverlight plugin crashes on EVERY page with Silverlight. Pages that used to work fine with silverlight 3 crash instantly - including my app and the Silverlight Beta 4 demo page!!! The browser crashes instantly and doesn't even attempt to load the page. I don't know how to debug this because there's no error. It just crashes instantly in all these browsers. Reinistalling, rebooting didn't fix the problem.

  Read the article

• How do I guarantee cleanup code runs in Windows C++ (SIGINT, bad alloc, and closed window)

  - by Meekohi

  I have a Windows C++ console program, and if I don't call ReleaseDriver() at the end of my program, some pieces of hardware enter a bad state and can't be used again without rebooting. I'd like to make sure ReleaseDriver() gets runs even if the program exits abnormally, for example if I hit Ctrl+C or close the console window. I can use signal() to create a signal handler for SIGINT. This works fine, although as the program ends it pops up an annoying error "An unhandled Win32 exception occurred...". I don't know how to handle the case of the console window being closed, and (more importantly) I don't know how to handle exceptions caused by bad memory accesses etc. Thanks for any help!

  Read the article

• Design view disappeared from Interface Builder

  - by skywalker168

  All of a sudden, the visual design window disappeared from my Interface Builder. It is a regular UIView, has some UIImageView, UILabel, and UIButtons on it. When I open IB, I can see the document window (with File's Owner, First Responder and View in it), Library and Inspector, but the visual design window disappeared. Double click on "View" in the document window doesn't do anything. If I go to List mode, I can see all the components on the view, but just can no longer find the visual design window. All other XIB can open just fine, only this XIB lost its design window. First I thought maybe it was hidden somewhere on the screen. Tried all kinds of things, even rebooting the computer, but nothing helped. Can anyone help? Thanks in advance! By the way, I'm running SDK 3.2 Beta 3.

  Read the article

• Dropdown menus not showing when i use my wpf application via Remote connections

  - by Bijoy Das Yesudas

  When i connect to my machine using remote desktop the dropdown menus and comboboxes i used in my wpf application is not showing up. And after closing the session when i comes back to my development machine where actually my application runs there also the same issue happens after the remote desktop session. Tried by changing resolution and all sometimes it works but most of the time result is negative. The only temporary solution i found for this is just rebooting the system which is not applicable. Could anyone please help me to fix this issue. Thanks in advance.

  Read the article

• Interface Builder and Xcode integration not working

  - by Martin Cote

  After having installed the iPhone SDK 3.1.2, Interface Builder is not in sync with Xcode anymore. The light indicator at the bottom of the XIB window is grey. IB doesn't see any files from the Xcode project. Xcode is always open when I start IB. I tried rebooting. No luck. I tried removing the preferences files for Xcode/IB. No luck. I tried reinstalling Xcode/IB. Still no luck. This page explains how IB monitors the changes in Xcode. While it was an interesting read, it didn't provide any help about how to investigate my problem. Any help would be appreciated. EDIT Here's additional information. I enabled the debug logs for launchd, and I noticed the following line that appears every time Interface Builder is started: [0x0-0x1b01b].com.apple.InterfaceBuilder3[315]: Couldn't open shared capabilities memory GSCapabilities (No such file or directory) This really seems to be related to my issue.

  Read the article

• iPhone app quits on launch

  - by Brammie

  I created an app using the 3.1.2 toolchain on linux.. it compiles and links normally, and in the makefile i upload my app (something) like this: @scp ./blabla [email protected]/Applications/Helloworld.app/ @ssh [email protected] "cd /Applications/Helloworld.app; ldid -S Helloworld_; killall; springBoard" when i launch my app it immediatly quits. according to google ldid failed, so i tried to do it manually. ldid did give an error, but after rebooting the error was fixed. The app still doesn't launch. the weird part of my problem is that an example i had DID work, but doesn't work anymore now. (p.s. i built the toolchain by following this guide)

  Read the article

• Cross-compiling a Python script on Linux into a Windows executable

  - by Chinmay Kanchi

  I have a Python script that I'd like to compile into a Windows executable. Now, py2exe works fine from Windows, but I'd like to be able to run this from Linux. I do have Windows on my development machine, but Linux is my primary dev platform and I'm getting kind of sick of rebooting into Windows just to create the .exe. Any ideas? PS: I am aware that py2exe doesn't exactly compile the python file as much as package your script with the Python interpreter. But either way, the result is that you don't need Python installed to run the script.

  Read the article

• Linux periodically "losing" ability to connect to server via SSH?

  - by gct

  I know this isn't exactly a programming question, but it popped up in my use of git for programming projects at least. I've got a web server that I use to host my git repos on, but my ubuntu box seems to "lose" the ability to connect to it via SSH. I'll get a "connection refused" error when I try to ssh or use git. Rebooting my local machine will fix the problem, but only temporarily. I can still connect to the web interface just fine, and the problem manifests with other servers as well. I've been working around it by pulling my changes over to my laptop and pushing from there, but that's sub-optimal as you can imagine. Has anyone seen something like this? I'd be tempted to say it's some kind of IP caching problem, but I can't connect even using the IP address of the server directly... Running Ubuntu 9.04

  Read the article

• Solution: Android INSTALL_FAILED_INSUFFICIENT_STORAGE error.

  - by Andrew Smith

  The INSTALL_FAILED_INSUFFICIENT_STORAGE error is the bane of every Android developer's life. It happens regardless of app size, or how much storage is available. Rebooting the target device fixes the problem briefly, but it soon comes back. There are hundreds (if not thousands) of message board posts from people asking why the problem occurs, but the folks at Google are frustratingly silent on the issue. There is a simple workaround. If your test device is running Android 2.2 or later then add the android:installLocation attribute to your application's manifest file, with the value "preferExternal". This will force the app to be installed on the device's external storage, such as a phone's SD card. For example: <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.andrewsmith.android.darkness" android:installLocation="preferExternal" This is more of a band-aid than a fix, and it may not be ideal if you want your finished app to install on the device's internal memory. But it will at least make the development process a lot less frustrating.

  Read the article

• Problems persisting Core Data structures on iPhone/iPad

  - by Rivier

  I have an iPhone/iPad app using Core Data to keep my application data. Sometimes, even though I don't get any error messages, the data is not really saved so when the app starts anew, it's all gone. This problem seems to disappear after physically rebooting the device, but otherwise it's pretty random and hard to track. Has anyone seen a similar issue? Also, it seems to happen more often in the iPhone 1st generation, less so in the 3G/3GS, and seldom in the iPad. Very strange...

  Read the article

• server reboot has caused django project to lose directories

  - by wmfox3

  A fully functional Django project as well as a couple in development have all broken following the rebooting of the server. In addition to some pieces of the Django admin returning errors as well as missing .js and .css files, I'm getting errors like this when viewing pages that include images uploaded through the admin. Exception Type: TemplateSyntaxError Exception Value: Caught an exception while rendering: (2, 'No such file or directory') Exception Location: /usr/lib/pymodules/python2.6/django/template/debug.py in render_node, line 81 Python Executable: /usr/bin/python Python Version: 2.6.4 So did the reboot stomp on some part of my configuration/setup or did it fail to restart a critical piece?

  Read the article

• The case of the mysterious MySQL caching across restarts

  - by shanusmagnus

  I found a very slow MySQL query in my web app. The weird thing is that the query is only slow the first time it's executed, despite the fact that the query_cache is set to its default (query_cache_size 0) like so: mysql> show variables like 'query%'; +------------------------------+---------+ | Variable_name | Value | +------------------------------+---------+ | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | +------------------------------+---------+ The even weirder thing is that this speedup persists even after the MySQL server has been stopped and restarted (I'm using OSX, and perform this restart using the system preferences pane.) The only way I can re-create the poor performance of the initial query is by rebooting the system. So my question is: how is this happening? Obviously some sort of caching at work, but where? And how does it persist across database restarts? This query is mediated through our web app, which comes via PHP/Apache, but there are no extra bells and whistles, and the curious caching also persists across Apache restarts. Help?

  Read the article

• Xubuntu 13.10 64bit - Slow and buggy "log out" process?

  - by MrKatSwordfish

  I'm a Windows convert who has done only a little bit of dabbling in Ubuntu in the past (back in Dapper Drake a few years back). A lot has changes since then, and I've been yearning to jump back into linux again! So, having just bought a new SSD, I felt that this would be as good of a time as any to set up a dual-boot system again. I've messed around with Ubuntu 13.10 a bit, and while Unity has its issues, I think that it still needs some time to develop. I looked into XFCE and liked it a lot, so I went with Xubuntu. I've installed Xubuntu, and for the most part it's running smoothly and it a pleasure to work with. The customization is great and the minimalistic look and feel is really nice! But here's my problem, whenever I select the "Log Out" option from either the application menu, or the user profiles menu, my PC comes to a crawl, and the dialog box with all the options (shut down, restart, log out, etc.) takes maybe a minute or more to appear. I click the log out button, my PC is brought to a snail's pace, and I have to wait for what seems like an eternity for the logout options to appear! If i try to open something else (even a terminal window) while it's loading the logout options, that other program won't finish loading until the logout screen finally appears. Keep in mind, this is a pretty much vanilla install of Xubuntu 13.10 64bit, on a PC with an intel i7, an SSD, 6gb DDR3 RAM, and a new AMD 7770 gpu (drivers haven't been installed yet, though). Everything else runs fast, most applications open near-instantly! It must be an issue with how the logout options screen initializes or something, but I'm not sure exactly how I can fix it.. Edit - Extra Info: This problem is very consistent when using the "Log Out" buttons in Xubuntu. However, I've found that I'm able to reboot and shutdown much more quickly by going through the "Switch User" screen, and using the reboot or shutdown buttons on that screen. I'm nearly certain that it has something to do with the little Log Out options screen that appears when I select Log Out from the menu, and not the actual process of shutting down.. So what should I do? I really like XFCE so far, and I've never tried a non-ubuntu based distro before, but should I just switch to something else? Is there any known fix for this issue? Are there any work-arounds for logging out/shutting down/rebooting via the terminal so that I can avoid this irritating bug? Is there any that I can monitor the progress of the log out via terminal, allowing me to see which parts are causing the slow-down? What is the best way to report this bug to someone?

  Read the article

• Visual Studio 10 crashed when tried to open one of solutions

  - by Michael Freidgeim

  Visual Studio 10 crashed when I tried to open  one of my solutions. Closing Visual Studio and rebooting the machine didn’t help.The error message that was logged(see below), didn’t give any useful ideas.Finally It was fixed after I’ve deleted MySolution.suo file, which was quite big, and also Resharper folders.Log Name:      ApplicationSource:        Application ErrorEvent ID:      1000Task Category: (100)Level:         ErrorKeywords:      ClassicUser:          N/ADescription:Faulting application name: devenv.exe, version: 10.0.40219.1, time stamp: 0x4d5f2a73Faulting module name: msenv.dll, version: 10.0.40219.1, time stamp: 0x4d5f2d48Exception code: 0xc0000005Fault offset: 0x00355770Faulting process id: 0x1dc0Faulting application start time: 0x01cd1836888599f4Faulting application path: C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exeFaulting module path: c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\msenv.dllReport Id: 9924b2f9-844e-11e1-bc19-782bcba513eaEvent Xml:<Event >  <System>    <Provider Name="Application Error" />    <EventID Qualifiers="0">1000</EventID>    <Level>2</Level>    <Task>100</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2012-04-12T03:21:31.000000000Z" />    <EventRecordID>401998</EventRecordID>    <Channel>Application</Channel>    <Security />  </System>  <EventData>    <Data>devenv.exe</Data>    <Data>10.0.40219.1</Data>    <Data>4d5f2a73</Data>    <Data>msenv.dll</Data>    <Data>10.0.40219.1</Data>    <Data>4d5f2d48</Data>    <Data>c0000005</Data>    <Data>00355770</Data>    <Data>1dc0</Data>    <Data>01cd1836888599f4</Data>    <Data>C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe</Data>    <Data>c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\msenv.dll</Data>    <Data>9924b2f9-844e-11e1-bc19-782bcba513ea</Data>  </EventData></Event>v

  Read the article

• Graphics card fan is loud (additional graphics card drivers cause problems)

  - by tk4muffin

  Okay this explanation is a bit longer ... but I start at the beginning: I've been using Windows 7 for a very long time, shortly after the release of v12.10 I installed Ubuntu via Windows installer. Everything worked fine but the fan of the graphics card. After a bit of research I found out, that I just had to select a different driver (nvidia-current (proprietary, tested) worked pretty well). This also fixed some graphical bugs when I just logged into my account. Due to my university I got a MSDNAA-Account (allows me to download every Windows OS for free). I downloaded and installed Windows 8. After configuration I installed ubuntu via the Windows installer once again and the first couple launches of ubuntu went well. Suddenly ubuntu didn't launched anymore...caused by some hard-disk errors and had no clue what to do. So I kept working on Windows 8 - unfortunately. After playing around with the new Windows, I put my PC to sleep-mode. I couldn't wake my PC up and it wasn't responding to anything (neither mouse-movement, -clicks or keyboard strokes, nor the power-button and the reset-button worked), so I pulled the plug. Turns out, this was a huge mistake. Somehow the BIOS broke and after restarting a couple of times, the BIOS repaired itself. Neither Windows 8, nor ubuntu where bootable. Now I had to install ubuntu several times, because after rebooting unity was hidden and I didn't know what the problem was and how to fix it. I finally realized that this problem was caused by the graphics card driver, which I've changed to the nvidia-current (This dirver worked fine before my PC "crashed"). So I installed Windows 8 again and after a bit of usage I installed ubuntu once again (via DVD). The booting of ubuntu and windows works fine - so far. But I'm still not able to change the graphics card driver without unity hiding away after restarting the OS. The noisy fan is really disturbing my work... PC Specs: Processor: Intel Core 2 Duo COU E8400 @ 3GHz x2 Memory: 7.8 GB OS type: 64-bit Graphics Card: GeForce 9600 GT Motherboard: Asus P5Q I hope the information given are enough.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >