Search Results

Search found 913 results on 37 pages for 'rebooting'.

Page 23/37 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Dual Monitor 'How To' for 12.04

  - by Kim Prince

  I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

  Read the article

• Why does my root filesystem keep becoming read-only?

  - by Scott Severance

  I've lately been having an issue with my root filesystem becoming readonly. It happens some amount of time after boot. I don't know exactly when it happens, as I don't usually notice it until something such as suspending the computer or printing fails. It seems to be fairly random. Since most of my system is on that partition, I can't re-mount it without rebooting. After this happens, the system runs a fsck. Sometimes it prompts to fix problems; other times it apparently finds none. To troubleshoot, I've searched through the logs but found nothing relevant. This might be due in part to not knowing when the actual errors took place. The filesystem is apparently good to begin with, as when fsck runs its fixes it doesn't report any errors. I've scanned the disk with SpinRite. A while ago, SpinRite found and recovered from some bad sectors on the hard drive. I ran a level 4 scan (a thorough scan) after this probem appeared, but SpinRite found nothing. The SMART data reports that the disk is OK with 63 bad sectors. The number of bad sectors hasn't changed recently. I realize that the disk isn't in the best of conditions, and I have complete backups in case of catastrophic failure. Yet the lack of errors in the logs, combined with SpinRite's test results and the unchanged SMART data makes me think that this problem has some cause other than disk failure. Other than disk failure, what could cause my symptoms?

  Read the article

• XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

  - by D. Dubya

  I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

  Read the article

• Desktop goes blurry / granulated

  - by Bonfire

  After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• In virtualbox, I can't access the dvd drive to install a guest host

  - by user211062

  I have installed a fresh copy of Ubuntu Server 12.04 and VirtualBox 4.3. I have set up a VM called "MediaServer" and tried to start it. I then get the following error: Cannot open host device '/dev/sr0' for readonly access. Check the permissions of that device ('/bin/ls -l /dev/sr0'): Most probably you need to be member of the device group. Make sure that you logout/login after changing the group settings of the current user (VERR_ACCESS_DENIED) I have looked all over the Internet and have been unable to find a solution. Using Webmin, I tried changing the group settings so that my user name was in the "vboxusers" group, but that did not work either. I tried various other changes in group settings and none of them worked. Also, I tried rebooting the server after the changes and that didn't work either. I have been following a guide on how to set up an Ubuntu server from the website "linuxhomeserverguide.com" and when it came to the section where you could finally set up your first virtual machine, I am stumped. I would really appreciate it if someone could help me. Thanks in advance.

  Read the article

• WIN7 and Ubuntu lost after Installing ubuntu 12.04 and win7 dual system ,I have no OS on my laptop now

  - by abos

  Here is the procedure: In the morning I installed ubuntu using a USB directly without config any thing to my win7 system. After install complete, ubuntu installation software tell me to reboot.And everything is just find. While rebooting, there is NO UBUNTU system for me to select,and my laptop go straight to log in using WIN7. NO ubuntu shows on WIN7's configuration(Default System). Log in ubuntu using usb(try ubuntu without installation), I can find ubuntu's filesystem was already there. Formatting the disk on WIN7's disk management, rearranging them to other disk.Still having no trouble with WIN7. In the afternoon try a few times of installation and uninstallation of ubuntu. still shows no sign of selecting ubuntu system. In the evening another trial while installing ubuntu with the third option of: installing ubuntu alongside with INW7, erase win7 and install ubuntu. somethingelse --- my check failed with configuartion for what comes out with the 'something else' option,reboot. And I have no system now with some cmd tips say: Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key. Files those on win7's orginal file system and Ubuntu filesystem can still be found when I 'try ubuntu without installation'. 5.But I just got no OS when I reboot my laptop normally.

  Read the article

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• How to ensure nvidia_current module loads during boot

  - by Aras

  I am running Ubuntu 12.10 on an Asus G75V laptop with nvidia gforce GTX 660M. I first run 12.04 on this machine and was able to install nvidia_current drivers from swat ppa: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current This worked in 12.04 and after rebooting the machine my graphics where working properly. After upgrade to 12.10 however, the machine boots into a low resolution desktop which I can not really interact with. I suspect this is due to the driver not being loaded properly. To fix this, I have to switch to ctrl+alt+F1 session and manually load the nvidia_current module and restart the desktop manager: sudo modprobe nvidia_current sudo service lightdm restart Now everything works fine again. However, I would like not to have to do this every time I reboot the machine. I also dont want to hack an script to do this on load. Basically, if things are setup currectly, the nvidia_current driver which is installed should load. How can I make sure nvidia_current driver module loads properly when system starts?

  Read the article

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• Wifi won't connect to certain networks

  - by Dave M G

  As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

  Read the article

• How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

  - by igoryonya

  I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

  Read the article

• PHP Debugging

  - by Bob Porter

  Originally posted on: http://geekswithblogs.net/blogofbob/archive/2013/06/25/php-debugging.aspxI have been experimenting setting up a PHP development environment. I have been trying on Windows, Linux (Ubuntu) and Mac OS X. So far my favorite environment is on Mac OS X. I have tried a number of IDE's and debuggers as well.  IDE's Eclipse with the PDT Add On The PDT version of Eclipse Aptana Zend Netbeans  Debuggers Zend XDebug So far the only environments that I could get running quickly were Zend and Netbeans. Eclipse is a nightmare of versions and capabilities. I could only get Eclipse working well on Windows. On Ubuntu I was able to get the debugger working once. Thats it, one session, then it never worked again. I love the Zend tools and environment and it worked well everywhere I tried it, but it was beyond my budget.  Aptana also worked best on Windows, on Mac OS X it was fragile and I never could get debugging to work.  Netbeans worked first time, every time, every where. With one oddity, after several debugging sessions the debugger would refuse to connect. On every platform, I would end having to reboot to restore debugging, which would then work correctly for quite some time. I am sure I will discover that some process is hanging and there is a less intrusive way to clear the issue, but for now rebooting always works. In a future post I will go over how exactly I set my environment up, for now I have decided to stay with OS X. By the way, I did NOT use MAMP or the Zend Server, I stuck with PHP compiled and built from source, as well as Apache and MySQL installed locally. I use Homebrew as a package manager for OS X. I tried PORT but did not like the fact I had to sudo all the time to use it, and it installed things in /opt which I was not used to. Homebrew does sandbox the apps but it is nice enough to symlink them to their "normal" locations usually in /usr/local.

  Read the article

• Why don't my Fn keys work for brightness or media after upgrading?

  - by Adina G

  I recently upgraded from 11.04 to 11.10. After the upgrade, I can no longer adjust the screen brightness or the volume using keyboard (before the upgrade, using Fn+F4, Fn+F11, etc. worked). Using Fn+F2 to disable wireless still works, so I guess the Fn key itself is being recognised. I tried to follow the instructions here, but I don't have a file in /etc/X11 called xorg.conf. I also tried following this workaround, but it had no noticeable effect. I've also tried going to Settings ? Keyboard ? Shortcuts and reassigning the brightness and volume controls, both to the default keys and to new combinations. These changes don't have an effect even after rebooting. Googling has found bug reports where pressing the media keys brings up a "no entry sign" rather than changing the volume. When I press the keys there's no response at all. I've also seen various people say a workaround is to have totem running in the background; this doesn't work for me either. Finally, I tried installing keytouch; I was able to install keytouch-editor but got the message "Unable to locate package keytouch". Any more ideas? I'd be very grateful if anyone could help me (even by pointing to a thread I've missed)!

  Read the article

• On installing nvidia drivers on 12.10 I get "Bad return status for module build on kernel: 3.5.0-19-generic (x86_64)"

  - by james

  New Ubuntu user - just recently made the mistake of trying a different nvidia driver. I'd managed to get the last (nvidia-current) one working through software sources a few weeks ago. The other day I tried to cross over to nvidia-experimental-310 and this produced a system error. Swapping back and forth between proprietary drivers now always causes an error and I can't get any of them to work. Installing through the terminal I get this error message every time: Building initial module for 3.5.0-19-generic Error! Bad return status for module build on kernel: 3.5.0-19-generic (x86_64) Consult /var/lib/dkms/nvidia-experimental-310/310.14/build/make.log for more information On rebooting, I end up with the crappy screen resolution and the thick black border around the screen. I use gksudo software-properties-gtk to bring up sources, where I can change back to the nouveau driver, which restores my screen. After that I can't find /var/lib/dkms/nvidia-experimental-310/310.14/build/make.log so I can't tell you what's inside. Any ideas what might be preventing the nvidia driver from installing? SOLUTION FOUND Okay - so I have a workaround. This is what has worked: Upgrade to kernel 3.7.0 as detailed here upgrade to latest version of the nvidia drivers as detailed here No idea what was happening with kernel 3.5.0-19, but this seems to be better. A little slower maybe on boot, but after days of messing around it's nice to have something that works.

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• One of my VMs went boom using Virtual Box and how it got fixed

  - by Enrique Lima

  I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

  Read the article

• My home partition slowly fills up until the system is unable to complete even simple tasks

  - by user973810

  So I have an awesome configuration on my home pc. My /home directory has its own partition. My home partition slowly fills up until the system is unable to complete even simple tasks. For example, when this issue has occured, I can load up firefox. It just pops up an error message saying that it cannot be done. Rebooting solves the issue. The strange thing is, I've run baobab and it doesn't notice a problem. There should be hundreds of gigabytes of data somewhere, but it doesn't see it. Does anyone have any idea of how I might troubleshoot this issue? I'm thinking I could do lsof but I've always found the output of that to be too much information. Maybe my drive is, like, dying. Edit: is there a /home analog of /var that gets cleared out at boot time? Maybe I could check in there next time I notice this problem to see if I can divine what's up. Update: I found the issue. my .xsession-errors file is filling up with Authentication deferred - ignoring client message Is there a way I can see what is causing this error and fix it?

  Read the article

• no boot option after install ubuntu 12.04 LTS using cd

  - by utamaku

  im facing a problem. after installing Ubuntu 12.04 LTS using boot from CD, when reboot there is no boot option to choose the OS. i directly log in to my Windows 7. before this im having an issue with the 'nomodeset' if not mistaken. after tick [x] on the nomodeset, i can install my Ubuntu, and stuck again at choosing the partition. so i had done 2 partitions for ubuntu, 1 partition for ubuntu ( ext3, mount /) and the other 1 for swap. then i can proceed until finished the installation. and after the system want to reboot. it take some times and just stuck at the screen doing nothing. not rebooting at all. i force to shutdown then restart again then directly go into windows 7 without boot option. in win7 the partitions for ubuntu is gone. i had tried the boot-repair thing and still doesn't help. it just show up the _ (terminal thing i guess). i typed boot repair and still the same. im using acer aspire 4736z. please anybody help me with this issue.

  Read the article

• Why does my flash video get stuck? (not lag?)

  - by Sk606

  After moving to Ubuntu 10.10 Netbook Edition, I've noticed a strange problem that manifests itself most obviously with streaming videos like youtube and hulu. The video will load and begin playing fine and eventually stop, as though it is buffering. However, it usually happens between 40 and 60 seconds into the clip. The loading indication however shows that it actually isn't buffering anymore of the data, and will just sit there. If I force the clip forward (e.g. click to start the movie somewhere ahead of the stall point) the clip will usually reload quickly and begin playing as expected. Because of the quick load times, and the consistent stop of video, I don't think the problem is related to hardware performance or network throughput. Also, I have none of these problems in 10.04. Rebooting into 10.04 makes the problem disappear. However, one more clue, I also have noticed a higher occurrence of web pages that simply "stop loading" - say, 1/10 clicks while browsing I have to hit "reload" to get the page to load because the page timed out part of the way through. This seems strangely related to the video problem, though is a lot less infuriating. Help! Where do I begin to look with a problem like this?

  Read the article

• Dual boot :Windows 7 partition deleted after Kubuntu 14.04 install...Weird!

  - by user292152

  I've bought two new SSD's in order to install Kubuntu on one and Win 7 on the other one. Before I had Linux Mint and Win7 together one just one SSD. So first I installed win7 as recommended, and then used the guided installer of Kubuntu to install Kubuntu. I selected the second SSD, chose the option "use entire disk and install", but to my surprise after rebooting and selecting win7 boot loader from grub2, I got a prompt that my windows installation is damaged, and I need to run the repair option from the installation disk. So I booted into Kubuntu again, fired up kparted and saw that indeed my windows partition got deleted, except the recovery partition. I don't understand what happened. I am not new to this topic, and this was not my first time installing Ubuntu alongside windows. I have never ever had that problem. What can I do to make sure this won't happen again, so I won't waste another 2 hours of my life? ?? Thanks a lot !

  Read the article

• Why does my flash video get stuck? (not lag?)

  - by Sk606

  After moving to Ubuntu 10.10 Netbook Edition, I've noticed a strange problem that manifests itself most obviously with streaming videos like youtube and hulu. The video will load and begin playing fine and eventually stop, as though it is buffering. However, it usually happens between 40 and 60 seconds into the clip. The loading indication however shows that it actually isn't buffering anymore of the data, and will just sit there. If I force the clip forward (e.g. click to start the movie somewhere ahead of the stall point) the clip will usually reload quickly and begin playing as expected. Because of the quick load times, and the consistent stop of video, I don't think the problem is related to hardware performance or network throughput. Also, I have none of these problems in 10.04. Rebooting into 10.04 makes the problem disappear. However, one more clue, I also have noticed a higher occurrence of web pages that simply "stop loading" - say, 1/10 clicks while browsing I have to hit "reload" to get the page to load because the page timed out part of the way through. This seems strangely related to the video problem, though is a lot less infuriating. Help! Where do I begin to look with a problem like this?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >