Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 24/376 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • All internet requests in Windows time out

    - by Brandon
    So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

    Read the article

  • Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

    - by Mouad
    On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

    Read the article

  • Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Radeon Mobility HD 5470 Not Working

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Reality behind wireless security - the weakness of encrypting

    - by Cawas
    I welcome better key-wording here, both on tags and title, and I'll add more links as soon as possible. For some years I'm trying to conceive a wireless environment that I'd setup anywhere and advise for everyone, including from big enterprises to small home networks of 1 machine. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even considering hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what walling (building walls) is for the cables. And giving pass-phrases is adding a door with a key. But the cabling without encryption is also insecure. Someone just need to plugin and get your data! And while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. As I said elsewhere, I believe we should encrypt only sensitive data regardless of wires. And passwords should be added to the users, always, not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where people actually care on using passwords on their OS users, so let's go with that in mind. For being able to break the walls or the door someone will need proper equipment such as a hammer or a master key of some kind. Same is true for breaking the wireless walls in the analogy. But, I'd say true data security is at another place. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. And who doesn't want to be able to use internet freely anywhere you can find wifi spots? I have 3G myself, but that's beyond the point here. If I have a wifi at home I want to let people freely use it for internet as to not be an hypocrite and even guests can easily access my files, just for reading access, so I don't need to keep setting up encryption and pass-phrases that are not whole compatible. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think? Is there really a need for encryption to have true wireless security?

    Read the article

  • Dell Inspiron 1520 Intermittent connection to wireless router

    - by ChuckNevol
    I have two computers in my home which are connected to a wireless router and a wireless printer. One computer is a Del XPS and the other a Dell laptop Inspiron 1520. In recent weeks we noticed the Inspiron had difficulty maintaining connection to the wireless router - web pages would suddenly have to be reloaded, or the computer rebooted while the other computer, the XPS, had no problems on the same network. So we connected a hard wire line from the Inspiron to the Verizon supplied wireless router. Problems still exist. could it be a bad driver?

    Read the article

  • How to permanently add wireless interfaces with iw

    - by walli
    How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

    Read the article

  • Wireless Network Issue, Disconnecting Randomly From Network

    - by Surfer513
    I'm having an odd problem with my wireless network. Here is the background information: Server (Windows Server 2008) 1 to 10 end user machines connecting to the network Layer 3 Access Point (Asus WL-330 gE) connected to ethernet of Server and all machines connect to the network via the AP The end user machines get a connection to the server with no problems initially. But then connections are randomly lost throughout the day to the server/network. The wireless NICs of the machines still see the wireless network but are unable to connect to it. Then after some time the connection is regained automatically. I initially thought there was a problem with this particular AP, but then I took the same make/model AP out of storage and still ran into the problem. Any ideas what could be causing this??? Very confusing that the wireless nics on the end user machines can still see the network but not connect, and that the connections are randomly lost/gained. Thanks in advance!

    Read the article

  • Wireless Bridge with NetGear and TP-Link

    - by Tiago Cruz
    I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

    Read the article

  • Problem with wireless router, always stay local

    - by ThisXcell
    Hey, for some reason my wireless router only allows me access to my local network. I've tried to reset the router and I've followed the set-up wizard and I've also done the advanced set-up and nothing is working. Wireless Router 108MBps Wireless Firewall Router WGT624 v2 ================ Modem Motorola - SB5101 Surfboard issued by Atlantic Boardband

    Read the article

  • Problem with wireless networking

    - by Rodnower
    Hello, I have atheros wifi hardware, intell chipset, gigabyte laptop and CentOS 5 installed. Now I try to use wireless network and get problems. First of all I want to say that I have 2 OS on my laptop, and when I load Windows XP I still may to access to the wireless network. First I try to get it on Linux was to make active wlan0 interface in: system - administration - network but I get: Determining IP information for wlan0... failed. Second I try also was unsuccessfully: [root 1 network-scripts]# ifup-wireless Error : unrecognised wireless request "off" This relevant output of iwconfig is: Warning: Driver for device wlan0 recommend version 21 of Wireless Extension, but has been compiled with version 20, therefore some driver features may not be available... wlan0 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 {output not in the original format} The same things are happen even if I do: modprobe wlan0 (this not get error) Important to say that modprobe not succeed to find ath_pci, tharefor I decide to download latest version of the madwifi driver from http://madwifi-project.org. I extracted this, but when I make this, this is what I get: [root 1 madwifi-0.9.4]# make /bin/sh: line 0: cd: /lib/modules/2.6.18-164.el5/build: No such file or directory Makefile.inc:66: * /lib/modules/2.6.18-164.el5/build is missing, please set KERNELPATH. Stop. I tried to set KERNELPATH, but I think that it was incorrect: [root 1 madwifi-0.9.4]# make KERNELPATH=/lib/modules/2.6.18-164.el5/kernel/ /bin/sh: cc: command not found Makefile.inc:81: * Cannot detect kernel version - please check compiler and KERNELPATH. Stop. Some one have any ideas? Thank you very much for ahead.

    Read the article

  • Networking a server with wireless network

    - by Benjamin Harding
    Right, I have a wireless network at home, and a server without a wireless adaptor, I also have upteen amounts of ethernet cables lying around. There is a laptop in the same room as the server, with a wireless connection, would there be a way to connect the server to the internet using the laptop?

    Read the article

  • Networking a server with wireless network

    - by Benjamin Harding
    Right, I have a wireless network at home, and a server without a wireless adaptor, I also have upteen amounts of ethernet cables lying around. There is a laptop in the same room as the server, with a wireless connection, would there be a way to connect the server to the internet using the laptop?

    Read the article

  • Wireless not working on ubuntu 12.04

    - by Yosef
    I just install ubuntu 12.04 but wirelless not works(windows 7 wirelless works). I open my windows 7 and see under Network Adapters: Edimax 802.11n Wireless Adapter Realtek PCIe GBE Family Controller Which drivers i should download to install them on ubuntu 12.04 to make wireless work? And how i install this drivers on ubuntu after i copy them to usb. (I can have only wireless connection not wire - soo i nhave to dowload the drivers with windows then copy them to ubuntu) Thanks

    Read the article

  • How to configure a wireless router to point to a remote www proxy

    - by Mark
    I have a LG smart Tv with browser. I need the tv browser to connect to a uk based proxy server on port 808. Unfortunately there is no option within tv to setup proxy for its browser. Now the Tv connects via a wireless connection to the internet. IE: TV <- D-Link DIR-605L <- ADSL <- WWW. Is it possible to setup this wireless router to connect the TV to the Proxy ?? If so ? where ? and what setings do i need to change in the wireless router ?? In short my question is ? How do i get the wireless router to make up for the lack of proxy connectivity within my Tv browser ?? Thanks in advance NB: I have configured my Pc's browser's proxy settings, and streaming via the proxy works 100%

    Read the article

  • Wireless disabled after connecting ethernet cable

    - by user1716672
    Im using Linux Mint 13. Wireless has always worked fine but stopped yesterday after I connected to the internet via an ethernet cable. I ran: sudo rfkill list gives me: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no sudo rfkill unblock 0 sudo rfkill list gives me 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no sudo service networking start results in: networking stop/waiting The contents of /etc/network/interfaces is auto lo iface lo inet loopback Any ideas what I can do?

    Read the article

  • 8021x wireless clients auto connect prior to user login

    - by JohnyV
    I am using a 2008 r2 dc that also performs Radius (NPS), I also have a 2008 r2 certificate authority which is giving out certificates. The computers are getting the certificate and when a user logs into the device (that has previously logged in) gets put on the correct VLAN (according to there user access). However I cant get the computers to join the wireless network prior to logging in, so that they can log in with their domain accounts and authenticate through the wireless. The basic setup is Computer gets group policy which tells it to get a certificate the computer then has a seperate vlan to join just as a computer account however the wireless computer wont connect through that vlan. (this vlan allows login information only then once the users credentials are verified it puts them onto another VLAN). So I am trying to work out why the notebook wont auto connect to the wireless network as a computer. Thanks

    Read the article

  • Wireless Network Disappearing From Available Networks (Windows 7)

    - by PeteDaMeat
    I have been using Windows 7 with a BT Voyager wireless adapter to connect to my home wireless network for around the last 6 months or so and until recently have experienced no problems. However, over the last couple of days Windows has been unable to connect to the network and the network name is no longer visible in the list of available wireless networks. The only way I have got round the problem is to reboot the NetGear router and to change the SSID to a network name which has not already been used. I do not believe the problem is with the router as my mobile phone can connect to it without any problems. The BT Voyager wireless adapter detects all other available networks so I presume this is a Windows 7 issue as it seems to occur when the PC is rebooted. This problen has happened twice in the last 2 days and is becoming extremely annoying. Does anyone have any suggestions?

    Read the article

  • activate wireless chip on ubuntu

    - by Charles
    I am currently using ubuntu 10.10 on my laptop , the model of my wireless chip is broadcom BCM4312 802.11b/g LP-PHY . I tried to activate the driver for the chip by clicking menu bar System - Administration - Additional Drivers . and activated Broadcom STA wireless driver. But the laptop can't detect any wireless signal still. Do I have to do any additional work to make the chip work ? Or how can I test if there is physical damage to the chip itself

    Read the article

  • Windows XP can't connect to wireless network

    - by mikez302
    I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

    Read the article

  • Win 7 Wireless Connected With Good Signal But No Internet Access

    - by c00lryguy
    In Windows 7 I was connected wirelessly for about a week when one day I came home and the wireless was connected with a strong signal but it said that I had "No Internet Access" It's been 3 days since then now and I have yet to find a way to fix it. My wireless drivers are right off the disk that came with the wireless card. Can anyone help me? My problem is similar to these: http://forums.cnet.com/5208-7589_102-0.html?threadID=120346 http://social.answers.microsoft.com/Forums/en-US/w7network/thread/90841fe7-c910-424b-82d7-48be7ef69f39

    Read the article

  • Wireless connection switches off IP address

    - by Sanjay Gupta
    I have a Lenovo laptop with windows XP and a wireless connection at home. The wireless connection works when initially I switch on the computer. but if I leave it for even 5 minutes, the wireless is gone. Then I have to shut it off and start computer all over again, waiting for 5 minutes. Even if the wireless speed is 48Mbps or better, it gives the message "Renewing IP address" and gets stuck there not moving to the next stage. Other laptop in the household works fine and can be left on. Why does this happen ? I suspect that IP address is the problem and somehow is not registered in all the necessary files.

    Read the article

  • Optimizing wireless router speed and minimizing interference.

    - by Tchalvak
    I've been experiencing problems with my wireless connectivity lately, and want to make sure that it's not related to the abundance of other wireless routers here in my building. So, what I'm looking for is a method (probably via some application or another) to audit the wireless channels (and other factors that might be important that I don't even know of yet) that are floating through the aether around me. Ubuntu or other linux apps are preferred, but some kind of windows/mac solution is possible, since I do have other OSes around me that I could install & test on. Router: netgear WGT624 v3 Hearsay tells me that channels 1, 6, and 11 are "non-overlapping" (I expect they aren't used for non-wireless-router purposes or something, not sure how they couldn't overlap with other routers using other channels), so perhaps my best choices of channel are limited, so if channels aren't really a big concern, I'd be happy to get links to other optimizations that I should look into.

    Read the article

  • Bridging Wireless and Wired Interfaces in Linux

    - by The Daemons Advocate
    My network setup is something like: Wireless Router <---> Netbook <---> Ubuntu Desktop ...or, more verbosely (with interfaces): Wireless Router <--(wireless)--> (eth2) Ubuntu Netbook Ubuntu Netbook (eth0) <---(wired)----> (eth0) Ubuntu Desktop In a perfect world, I'd have the desktop wired, but weird circumstances combined with my wanting to understand more about networking in linux make me want to figure out how to bridge these two devices. A bit of googling has given me this example using bridge-utils, and here's how I'm (failing) to setup the bridge (on the netbook): sudo -i ifconfig eth0 0.0.0.0 ifconfig eth2 0.0.0.0 brctl addbr bridget brctl addif bridget eth0 brctl addif bridget eth2 ifconfig bridget up ...then, trying to make sure that the netbook can still get on the internets... route add default gateway 192.168.2.1 dhclient bridget What happens after this is that the dhclient command above (netbook) doesn't get served an IP, and the Desktop, if I run dhclient, it doesn't get served an IP. Some weird considerations might be that I'm running the Network Manager Applet that comes with Ubuntu. While I'm sure I can get a command line wireless configuration setup, it's a bit complex. Can someone give me a shout as to where I'm going wrong? I'd also like to note another related question titled 'Bridging my laptop’s wireless and wired adaptors', however the setup is different to mine.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >