Search Results

Search found 6530 results on 262 pages for 'conhost exe'.

Page 240/262 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• what can cause a folder to become indestructible?

  - by JustJeff

  I have a directory that I want to delete, but windows (xp sp3) is giving me the run-around and the folder is now effectively indestructible. Attempts to open the folder, either via explorer or cmd.exe are met with 'd:/temp/foo Is Not Accessible. Access is denied'. Attempts to delete the folder result in 'Cannot delete foo: The directory is not empty' So I can't delete it because supposedly it's not empty, but windows won't let me in it for some reason, so I can't clean it out first. There's nothing in it of consequence, and basically I just want to delete it at this point. Thinking that some other process must have a lock on it, I used the SysInternals 'handles' and Process Explorer to look for open handles with the directory name. These turned up no matches. (The directory name is not actually 'foo', it is something more unique but 'foo' is easier to type here). I put the machine through a restart, and the problem persists. I did a search for the folder name with regedit, to see what other apps might be aware of it. No match. The properties dialog was mildly interesting. The Read-Only attribute is 'semi-checked', i.e., the grayish check mark you get when some parts are and some parts aren't. Naturally I immediately unchecked this, and tried to delete the folder. No go. Opening properties again reveals the gray check mark next to Read-Only has returned. All the stats, size, size on disk, files, folders, all these are zero. There do not appear to be any shares on the folder, so that's not it either. Finally, I tried opening the partition's properties, and running the Tools/Error Checking utility. This didn't turn up any problems either. Fwiw, this directory was created by [a popular gui zip tool] when I tried to unpack a tar-and-zipped archive created on another system with command line utils. The archive was definitely corrupt, but I've never seen such a file do anything worse than crash the zip app, and certainly never leave permanent glitches in the file system. So what else can possibly be going on to make this folder behave this way?

  Read the article

• How to find out Vim's currently mapped commandos

  - by Boldewyn

  I'm using Vim under Debian, Win Vista and WinXP (the latter two with Cygwin). To handle tabs more easily, I mapped <C-Left> and <C-Right> to :tab(prev|next). This mapping works like a charm on the Debian machine. On the Windows machines, however, pressing <C-Left> deletes 5 lines, as far as I can tell, and meddles with cursor position, while <C-Right> does this, too, and additionally enters Insert mode. Question: To put it in a nutshell, how can I find out, why Vim behaves as it does? Is there a way to backtrace the active commands and keystrokes? Could there be a plugin the culprit? (I didn't install one, perhaps a default include by the Cygwin distro...) If so, how can I find it? Additional Diagnosis: This behaviour occurs regardless of any existing ~/.vimrc file (is therefore not related to my above mentioned mapings) and is not inherited of some /etc/vim/vimrc, since this doesn't exist in the default Cygwin installation. :verbose map doesn't yield any new insights. Either nothing or my mentioned mappings appear, based on the existence of the .vimrc file :help <C-Left> suggests, that the default would be a simple cursor movement, which is apparently not the case. Vim's version under Cygwin: VIM - Vi IMproved 7.2 (2008 Aug 9, compiled Feb 11 2010 17:36:58) Included patches: 1-264 Compiled by http://cygwin.com/ Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +cryptv +cscope +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +postscript +printer +profile -python +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -g -O2 -D_FORTIFY_SOURCE=1 Linking: gcc -L/usr/local/lib -o vim.exe -lm -lncurses -liconv

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• Problems with Windows XP Plug and Play devices, maybe relating to MSVCR71.dll

  - by Richard

  I believe this question is unanswered as of now so I appologize if I've overlooked it. I have been having trouble some external devices with windows recently and I'm trying my darnedest to get to the bottom of it. At first, my Zero Tension USB mouse would stop working...as in the laser in the bottom of it would be on and would register movement, but the mouse on the screen wouldn't budge even an inch. At first this would happen randomly and then it would correct itself. As time went on, it became more and more frequent. At some point, the computer would make the "doo doo" sound of plugging or unplugging a USB device when the mouse stopped/started working. I dealt with it for a while and usually if I rebooted my machine, the mouse would work again for a day or two. As more time has gone on, the computer fully does not recognize the mouse AT ALL...I have another mouse that I use with the computer that works just fine and cannot seem to figure out why my Zero Tension mouse has failed. I tried plugging the Zero Tension mouse into my Mac and low and behold, it works without hesitation and never stops on me... Needless to say, I am stumped about this. I figured because I had another mouse I could deal with the loss of my fancy one for now...until my speakers stopped being recognized. I have a set of Logitec speakers that I have plugged into my sound card. Again, every now and again the audio devices would cease to be recognized by my computer, but a reboot would fix the problem. Now my speakers do not work at all with my computer and I feel like it's time to ask for help. My computer seems to be having a neural shutdown...where I can plug in devices and the computer doesn't seem to notice anything wrong, but none of the devices work. I hope this doesn't get any worse! Please help! Also, on a potentially (un)related note, when I start up my machine I get the message "This application has failed to start because Msvcp71.dll was not found. Re-installing the application may fix this problem." in reference to qbupdate.exe I don't know if that DLL being messed up has anything to do with my mouse or speakers, but I figure it might...anyway, thanks in advance for an answer and let me know if I need to clarify anything. Let me sum up: Zero Tension Mouse gradually stopped working Logitec Speakers gradually stopped working MSVCR71.dll seems to be messed up I don't know if any of those are related but any help would be much appreciated

  Read the article

• Basic OpenVPN setup not working

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

  Read the article

• Windows 7, weird/annoying explorer problem

  - by Shiki

  First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

  Read the article

• Why isn't this rewrite rule (nginx) applied? (trying to setup Wordpress multisite)

  - by Brian Park

  Hi, I'm trying to setup Wordpress multisite (subfolder structure) with nginx, but having a problem with this rewrite rule. Below is the Apache's .htaccess, which I have to translate into nginx configuration. RewriteEngine On RewriteBase /blogs/ RewriteRule ^index\.php$ - [L] # uploaded files RewriteRule ^([_0-9a-zA-Z-]+/)?files/(.+) wp-includes/ms-files.php?file=$2 [L] # add a trailing slash to /wp-admin RewriteRule ^([_0-9a-zA-Z-]+/)?wp-admin$ $1wp-admin/ [R=301,L] RewriteCond %{REQUEST_FILENAME} -f [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^ - [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(wp-(content|admin|includes).*) $2 [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(.*\.php)$ $2 [L] RewriteRule . index.php [L] Below is what I came up with: server { listen 80; server_name example.com; server_name_in_redirect off; expires 1d; access_log /srv/www/example.com/logs/access.log; error_log /srv/www/example.com/logs/error.log; root /srv/www/example.com/public; index index.html; try_files $uri $uri/ /index.html; # rewriting uploaded files rewrite ^/blogs/(.+/)?files/(.+) /blogs/wp-includes/ms-files.php?file=$2 last; # add a trailing slash to /wp-admin rewrite ^/blogs/(.+/)?wp-admin$ /blogs/$1wp-admin/ permanent; if (!-e $request_filename) { rewrite ^/blogs/(.+/)?(wp-(content|admin|includes).*) /blogs/$2 last; rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; } location /blogs/ { index index.php; #try_files $uri $uri/ /blogs/index.php?q=$uri&$args; } location ~ \.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/example.com/public$fastcgi_script_name; } # static assets location ~* ^.+\.(manifest)$ { access_log /srv/www/example.com/logs/static.log; } location ~* ^.+\.(ico|ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|css|rss|atom|js|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { # only set expires max IFF the file is a static file and exists if (-f $request_filename) { expires max; access_log /srv/www/example.com/logs/static.log; } } } In the above code, I believe rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; has no effect because when I look at the access_log file, I see the following line: 2010/09/15 01:14:55 [error] 10166#0: *8 "/srv/www/example.com/public/blogs/test/index.php" is not found (2: No such file or directory), request: "GET /blogs/test/ HTTP/1.1" (Here, 'test' is the second blog created using multisite feature) What I'm expecting is that /blogs/test/index.php gets rewritten to /blogs/index.php, but it doesn't seem to do that... Am I overlooking something obvious? Thanks!

  Read the article

• Is it safe to enable forced ASLR via EMET on Windows?

  - by D.W.

  I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

  Read the article

• Why many applications close after opening a document or doing a specific actions?

  - by Mohsen Farjami

  I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

  Read the article

• Can't connect to svnserve on localhost - connection actively refused

  - by RMorrisey

  When I try to connect using Tortoise to my SVN server using: svn://localhost/ Tortoise tells me: "Can't connect to host 'localhost'. No connection could be made because the target machine actively refused it." How can I fix this? I am trying to set up a subversion server on my local PC for personal use. I am running Windows Vista, with SlikSVN and TortoiseSVN installed. I previously had everything working correctly, but I found that I couldn't merge(!), apparently due to a version mismatch between the SVN client and server. Anyway... I now have the following setup: I created a repository using svnadmin create; it resides at C:\svnGrove C:\svnGrove\conf\svnserve.conf (# comments omitted): [general] anon-access=read auth-access=write password-db=passwd #authz-db=authz realm=svnGrove C:\svnGrove\conf\passwd: [users] myname=mypass My Subversion Server service is pointed to: C:\Program Files\SlikSvn\bin\svnserve.exe --service -r C:\svnGrove It shows the TCP/IP service as a dependency. I have also tried running svnserve from the command line, with similar results. The below is provided by the 'about' option in TortoiseSVN: TortoiseSVN 1.6.10, Build 19898 - 32 Bit , 2010/07/16 15:46:08 Subversion 1.6.12, apr 1.3.8 apr-utils 1.3.9 neon 0.29.3 OpenSSL 0.9.8o 01 Jun 2010 zlib 1.2.3 The following is from svn --version on the command line (not sure why it says CollabNet, CollabNet was the previous SVN binary that I had set up. The uninstaller failed to remove everything gracefully): svn, version 1.6.12 (SlikSvn/1.6.12) WIN32 compiled Jun 22 2010, 20:45:29 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme I disabled my Windows Firewall and CA Internet Security, without success in resolving the issue. Edit The old version of svnserve was still set up as a service after the uninstall, pointed to this path: C:\Program Files\Subversion\svn-win32-1.4.6\bin I edited the registry key for the service to point to the new path (shown above). Whether I run svnserve as a service, or using -d, I do not see an entry for that port number in the listing generated by netstat -anp tcp.

  Read the article

• windows 2008 R2 TS printer security - can't take owership

  - by Ian

  I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

  Read the article

• Google Apps For Business, SSO, AD FS 2.0 and AD

  - by Dominique dutra

  We are a small company with 22 people in the office. We had a lot of problems with e-mail in the past so I decided to change over to Google Apps for Business. It is the perfect solution for us, except for one thing: I need to be able to control the access to the mailboxes. Only users inside the office, authenticated to AD, or users authenticated to our VPN can connect to gmail. From what I've read it is possible using the SSO (Single Sign On) solution provided by Google - but i am having some trouble finding consistent information about it. First of all, our infrastructure: Windows Server 2008 R2 Active Directory, one domain only. Kerio Control for QoS and VPN. That's about it on our side. On Google Apps' side, I have one account, and 03 domains that my users use to log in. The main domain has most of the users, but the are a couple of people that login using one of the subdomains. I have a 03 domains because I run mail for 03 companies and wanted all to be in within the same control panel. Well, I found some guides on the internet but none of them cover the AD FS installation part. I've read somewhere that I needed to download AD FS 2.0 directly from Microsoft.com, because the one that came with Windows Server was a old version. I downloaded it (adfsSetup.exe) and tried to install but got an error, saying that I needed a Windows Server 2008 Sp2 for that program. My Windows Server 2008 is R2. I really need some help here, this is very importand, I dont want to have to pay $1000 for a SSO solution when i have an AD set up. Can someone please point me out to the right direction? Where can I find an AD FS 2.0 setup compatible with R2 would be a good start, or the one that came with r2 is already the 2.0 version. After the initial setup, there are some guides on the internet about the Google Apps part. It seems to be really easy. I also tried adding AD FS role, but there are a bunch of options wich I have no idea what means, and I coudn't find any guide covering that on the internet. I dont have a lot of experience with Windows Server, but I have a company wich is certificated and provide us with support. I can ask for their help in the later setup, but I dont think ADFS is a very common thing to deal with.

  Read the article

• TFS2010 Hangs “Waiting for Build Agent”

  - by Qpirate

  I have asked this question over on SO the link to the question is here but i am hoping this is a better place to ask it. I have 3 VM's each running the TFS Build Host Service 1 has 1 controller and 1 agent 2 have 2 Build Agents each. Most of the time (7\10 builds) it comes back with the following error message TF215097: An error occurred while initializing a build for build definition BUILD_DEFINITION: There was no endpoint listening at http://MACHINE1:9191/Build/v3.0/Services/Controller/14 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. and there is no errors when i do get this message. the following is the config file that i have created <configuration> <appSettings> <add key="traceWriter" value="true"/> </appSettings> <system.diagnostics> <switches> <add name="BuildServiceTraceLevel" value="4"/> <add name="API" value="4"/> <add name="Authentication" value="4"/> <add name="Authorization" value="4"/> <add name="Database" value="4"/> <add name="General" value="4"/> <add name="traceLevel" value="4"/> </switches> <trace autoflush="true" indentsize="4"> <listeners> <add name="myListener" type="Microsoft.TeamFoundation.TeamFoundationTextWriterTraceListener,Microsoft.TeamFoundation.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" initializeData="c:\logs\TFSBuildServiceHost.exe.log" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> </configuration> I do have my own custom activities in my build process but this does not seem to be a problem as sometimes the build actually does go. I have tried refreshing the template as some sites suggest. Has anyone come across a solution for this problem? or can anyone tell me how to catch these errors when they happen?

  Read the article

• Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

  - by ThinkerIV

  I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

  Read the article

• WordPress 3.5 Multisite and nginx siteurl issues

  - by Florin Gogianu

  I'm setting up multisite on localhost in subdirectories. The problem is that when I'm trying to access the dashboard of a site I just created ( localhost/wptest/site/wp-admin ) I get "This webpage has a redirect loop" and when I try to access the actual website ( localhost/wptest/site ) the page loads but without assets, such as css. When I access the network dashboard, or the primary site dashboard on localhost/wptest everything is just fine. Also when I edit the permalink of the second site in the network dashboard, to be like this: localhost/site it also runs fine. How to make it work with the default permalink structure localhost/wptest/site? The wordpress files are in /usr/share/html/wptest The wp-config.php is as follows: define('WP_ALLOW_MULTISITE', true); define('MULTISITE', true); define('SUBDOMAIN_INSTALL', false); define('DOMAIN_CURRENT_SITE', 'localhost'); define('PATH_CURRENT_SITE', '/wptest/'); define('SITE_ID_CURRENT_SITE', 1); define('BLOG_ID_CURRENT_SITE', 1); And the server block / virtual host is like this: server { ##DM - uncomment following line for domain mapping listen 80 default_server; #server_name example.com *.example.com ; ##DM - uncomment following line for domain mapping #server_name_in_redirect off; access_log /var/log/nginx/example.com.access.log; error_log /var/log/nginx/example.com.error.log; root /usr/share/nginx/html/wptest; index index.html index.htm index.php; if (!-e $request_filename) { rewrite /wp-admin$ $scheme://$host$uri/ permanent; rewrite ^(/[^/]+)?(/wp-.*) $2 last; rewrite ^(/[^/]+)?(/.*\.php) $2 last; } location / { try_files $uri $uri/ /index.php?$args ; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; } location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { access_log off; log_not_found off; expires max; } location = /robots.txt { access_log off; log_not_found off; } location ~ /\. { deny all; access_log off; log_not_found off; } } And finally here's an error log: 2013/06/29 08:05:37 [error] 4056#0: *52 rewrite or internal redirection cycle while internally redirecting to "/index.php", client: 127.0.0.1, server: example.com, request: "GET /nginx HTTP/1.1", host: "localhost"

  Read the article

• Batch file to uninstall all Sun Java versions?

  - by Ricket

  I'm setting up a system to keep Java in our office up to date. Everyone has all different versions of Java, many of them old and insecure, and some dating back as far as 1.4. I have a System Center Essentials server which can push out and silently run a .msi file, and I've already tested that it can install the latest Java. But old versions (such as 1.4) aren't removed by the installer, so I need to uninstall them. Everyone is running Windows XP. The neat coincidence is that Sun just got bought by Oracle and Oracle has now changed all the instances of "Sun" to "Oracle" in Java. So, I can conveniently not have to worry about uninstalling the latest Java, because I can just do a search and uninstall all Sun Java programs. I found the following batch script on a forum post which looked promising: @echo off & cls Rem List all Installation subkeys from uninstall key. echo Searching Registry for Java Installs for /f %%I in ('reg query HKLM\SOFTWARE\microsoft\windows\currentversion\uninstall') do echo %%I | find "{" > nul && call :All-Installations %%I echo Search Complete.. goto :EOF :All-Installations Rem Filter out all but the Sun Installations for /f "tokens=2*" %%T in ('reg query %1 /v Publisher 2^> nul') do echo %%U | find "Sun" > nul && call :Sun-Installations %1 goto :EOF :Sun-Installations Rem Filter out all but the Sun-Java Installations. Note the tilda + n, which drops all the subkeys from the path for /f "tokens=2*" %%T in ('reg query %1 /v DisplayName 2^> nul') do echo . Uninstalling - %%U: | find "Java" && call :Sun-Java-Installs %~n1 goto :EOF :Sun-Java-Installs Rem Run Uninstaller for the installation MsiExec.exe /x%1 /qb echo . Uninstall Complete, Resuming Search.. goto :EOF However, when I run the script, I get the following output: Searching Registry for Java Installs 'DEV_24x6' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_542214F1' is not recognized as an internal or external command, operable program or batch file. And then it appears to hang and I ctrl-c to stop it. Reading through the script, I don't understand everything, but I don't know why it is trying to run pieces of registry keys as programs. What is wrong with the batch script? How can I fix it, so that I can move on to somehow turning it into a MSI and deploying it to everyone to clean up this office? Or alternatively, can you suggest a better solution or existing MSI file to do what I need? I just want to make sure to get all the old versions of Java off of everyone's computers, since I've heard of exploits that cause web pages to load using old versions of Java and I want to avoid those.

  Read the article

• batch file infinite loop when parsing file

  - by Bart

  Okay, this should be a really simple task but its proving to be more complicated than I think it should be. I'm clearly doing something wrong, and would like someone else's input. What I would like to do is parse through a file containing paths to directories and set permissions on those directories. An example line of the input file. There are several lines, all formatted the same way, with a different path to a directory. E:\stuff\Things\something else (X)\ (The file in question is generated under Cygwin using find to list all directories with "(X)" in the name. The file is then passed through unix2win to make it windows compatible. I've also tried manually creating the input file from within windows to rule out the file's creation method as the problem.) Here's where I'm stuck... I wrote the following quick and dirty batch file in Windows XP and it worked without any issues at all, but it will not work in server 2k8. Batch file code to run through the file and set permissions: FOR /F "tokens=*" %%A IN (dirlist.txt) DO echo y| cacls "%%A" /T /C /G "Domain Admins":f "Some Group":f "some-security-group":f What this is SUPPOSED to do (and does in XP) is loop through the specified file (dirlist.txt) and run cacls.exe on each directory it pulls from the file. The "echo y|" is in there to automagically confirm when cacls helpfully asks "are you sure?" for every directory in the list. Unfortunately, however, what it DOES is fall into an infinite loop. I've tried surrounding everything after "DO" with quotes, which prevents the endless loop but confuses cacls so it throws an error. Interestingly, I've tried running the code from after "DO" manually (obviously replacing the variable with the full path, copied straight from the file) at a command prompt and it runs as expected. I don't think it's the file or the loop, as adding quotes to the command to be executed prevents the loop from continuing past where it's supposed to... I really have no idea at this point. Any help would be appreciated. I have a feeling it's going to be something increadibly stupid... but I'm pulling my hair out so I thought I'd ask.

  Read the article

• Getting an boot error when starting computer

  - by Rob Avery IV

  I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

  Read the article

• How to temporary disable a mirror video driver in windows xp registry

  - by happy clicker

  Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

  Read the article

• Looking for a new, free firewall (Sunbelt has a huge hole)

  - by Jason

  I've been using Sunbelt Personal Firewall v. 4.5 (previously Kerio). I've discovered that blocking Firefox connections in the configuration doesn't stop EXISTING Firefox connections. (See my post here yesterday http://superuser.com/questions/132625/sunbelt-firewall-4-5-wont-block-firefox) The "stop all traffic" may work on existing connections - but I'm done testing, as I need to be able to be selective, at any time. I was using the free version, so the "web filtering" option quit working after some time (mostly blocking ads and popups), but I didn't use that anyway. I used the last free version of Kerio before finally having to go to Sunbelt, because Kerio had an unfixed bug where you'd eventually get the BSOD and have to reset Kerio's configuration and start over (configure everything again). So I'm looking for a new Firewall. I don't like ZoneAlarm at all (no offense to all it's users that may be here - personal taste). I need the following: (Sunbelt has all these, except *) - 1. Be able to block in/out to localhost (trusted)/internet selectively for each application with a click (so there's 4 click boxes for each application) [*that effects everything immediately, regardless of what's already connected]. When a new application attempts a connection, you get an allow/deny/remember windows. - 2. Be able to easily set up filter rules for 'individual application'/'all applications,' by protocol, port/address (range), local, remote, in, out. [*Adding a filter rule also doesn't block existing connections in Sunbelt. That needs to work too.] - 3. Have an easy-to-get-to way to "stop all traffic" (like a right click option on the running icon in the task bar). - 4. Be able to set trusted/internet in/out block/allowed (4 things per item) for each of IGMP, ping, DNS, DHCP, VPN, and broadcasts. - 5. Define locahost as trusted/untrusted, define adapter connections as trusted/untrusted. - 6. Block incoming connetions during boot-up and shutdown. - 7. Show existing connections, including local & remote ip/port, protocol, current speed, total bytes transferred, and local ports opened for Listening. - 8. An Intrusion Prevention System which blocks (optionally select each one) known intrustions (long list). - 9. Block/allow applications from starting other applications (deny/allow/remember window). Wish list: A way of knowing what svchost.exe is doing - who is actually using it/calling it. I allowed it for localhost, and selectively allowed it for internet each time the allow/deny window came up. Thanks for any help/suggestions. (I'm using Windows XP SP3.)

  Read the article

• Localhost has just stopped working (using xampp)

  - by Joe Taylor

  I installed Xampp to use for local development of a Drupal site. Its been working fine out of the box until now. The main Xampp localhost welcome menu loads, however my subdirectory (localhost/drupal) doesn't. It just spins in the browser for ages and nothing happens. Just a blank screen. I've tried the edit people suggest in the hosts file but that hasn't work and I'm getting no errors so not sure what to do. Anyone have any ideas what might be wrong? PS I'm running Windows 7 edit: Log files: Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 [Tue Nov 05 20:52:07.242454 2013] [ssl:warn] [pid 8432:tid 260] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:07.331459 2013] [core:warn] [pid 8432:tid 260] AH00098: pid file C:/xampp/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? [Tue Nov 05 20:52:07.820487 2013] [ssl:warn] [pid 8432:tid 260] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:07.898492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00455: Apache/2.4.4 (Win32) OpenSSL/0.9.8y PHP/5.4.16 configured -- resuming normal operations [Tue Nov 05 20:52:07.898492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00456: Server built: Feb 23 2013 13:07:34 [Tue Nov 05 20:52:07.898492 2013] [core:notice] [pid 8432:tid 260] AH00094: Command line: 'c:\xampp\apache\bin\httpd.exe -d C:/xampp/apache' [Tue Nov 05 20:52:07.905492 2013] [mpm_winnt:notice] [pid 8432:tid 260] AH00418: Parent: Created child process 7588 [Tue Nov 05 20:52:08.882548 2013] [ssl:warn] [pid 7588:tid 272] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:09.467582 2013] [ssl:warn] [pid 7588:tid 272] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Tue Nov 05 20:52:09.534585 2013] [mpm_winnt:notice] [pid 7588:tid 272] AH00354: Child: Starting 150 worker threads. Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41 Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 123731968 bytes) in C:\xampp\apps\drupal\htdocs\sites\all\themes\directory\node--job.tpl.php on line 41

  Read the article

• DNS Issue Windows 2003 AD-The server holding the PDC role is down

  - by Dave M

  Our network of Windows 2003 and Windows 2008 servers suddenly hasDNS issues. There are 7 DCs. Two at our main office and one each at branch sites (one branch has two a 2008R2 and WIN2K3) Only two are WIN2008R2 Running DCDIAG on the WIN2K3 at main site (DC1) reports no issues. Running at any branch site reports two issues All other test pass. The server DC1 can be PINGed by name from any site Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: FsmoCheck Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355 A Primary Domain Controller could not be located. The server holding the PDC role is down. Netdom.exe /query DC reports the expected servers. netdom query fsmo This reports the server at the main office holds the following roles: * Schema owner Domain role owner PDC role RID pool manager Infrastructure owner In the DNS management snap-in, DC1 appears as DNS server but does not appear in _msdcs-dc-_sites-Default-First-Site-Name-_TCP There is no _ldap or –kerberos record pointing to DC1 Same issue msdcs-dc-_sites- -_TCP Again there is no _ldap or –kerberos record pointing to DC1 Under Domain DNS Zones there is no entry for the server. This is the case for any _tcp folder in the DNS. The server DC1 appears correctly as a name server in the Reverse Lookup Zone. There is a Host(A) record for DC1 but in the Forward Lookup Zone there is no (same as parent folder) Host(A) for the DC1 server but such an entry exists for the other DCs at branch sites and the other DC at the main office. We have tried stopping and starting the netlogon service, restarting DNS and also dcdiag /fix. Netdiag reports error: Trust relationship test. . . . . . : Failed [FATAL] Secure channel to domain 'XXX' is broken. [ERROR_NO_LOGON_SERVERS] [WARNING] Failed to query SPN registration on DC- One entry for each branch DC All braches lsit the problem server and it can be Pinged by name from any branch Fixing is number one priority but also would like to determine the casue.

  Read the article

• Anti-virus protection question?

  - by DaBaer

  About 4 years ago, I found Kaspersky and have been using the most current version since. Most people try and argue the use of AVG or Avast to me, and there are some very solid reasons I do not go that route. Over the years, I have found Kasp to become bulkier and bulkier, and have had issues setting it up for friends/family/clients. I am just curios on possible recommendations from other users, with my criteria in mind: What I like about Kasp in the past: The license sold in stores in a 3 pack, is considered a commercial license, and emails from Kasp in response to my questions, make it clear that I can do with the 3 licenses that I want, providing I do not use more than 3 installs per Key. So, allowed me to buy 3, 5, and 7 packs, and resell to users at a cheaper cost than what they would pay if they bought their own license. The ability to easily obtain a currently updated .exe for installation on multiple peoples machines. Power of the scan. Kasp has been a good solution for me (even when using a trial license) on cleaning up machines that were badly infected (in which AVG and AVAST were unable to.) Speed of install/update. After a cleanup of malwarebytes, spybot, mcafee stinger, ccleaner, and combofix, I used to be able to get Kasp Int Security installed and updated in around 5 minutes. The issues that I have with the free AV, is strength of protection. In my opinion for someone who is a 'power use' these are good alternatives, because such a user should be trained or knowledgeable enough to be careful and not get themselves in trouble. Most of the users I assist, are too PC ignorant to know any better, and go hogwild on the web. It has been my experience that the number of people coming back to me with spyware/malware/virus issues since I have converted from AVG to Kasp has been cut down to around 20% of what it used to be 4 or 5 years ago. In a perfect world, I could install and use Kasp Internet Security 2008, and be very happy. But this is not the case anymore. So after this long description of what I used, and have used, does anyone have any good recommendations on AV that isn't going to cost me too much per install?

  Read the article

• nginx+django serving static files

  - by avalore

  I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

  Read the article

• Htaccess strange behaviour with Nginx

  - by Termos

  I have a site running on Nginx (v1.0.14) serving as reverse proxy which proxies requests to Apache (v2.2.19). So Nginx runs on port 80, Apache is on 8080. Overall site works fine except that i cannot block access to certain directories with .htaccess file. For example i have 'my-protected-directory' on 'www.site.com' Inside it i have htaccess with following code: <Files *> order deny,allow deny from all allow from 1.2.3.4 <--- my ip address here </Files> When i try to access this page with my ip (1.2.3.4) i get 404 error which is not what i expect: http://www.site.com/my-protected-directory However everything works as expected when this page is served directly by Apache. I can see this page, everyone else can't. http://www.site.com:8080/my-protected-directory Update. Nginx config (7.1.3.7 is site ip.): user apache; worker_processes 4; error_log logs/error.log; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; gzip on; gzip_min_length 1024; gzip_http_version 1.1; gzip_proxied any; gzip_comp_level 5; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon; server { listen 80; server_name www.site.com site.com 7.1.3.7; access_log logs/host.access.log main; # serve static files location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/www.site.com/httpdocs; proxy_set_header Range ""; expires 30d; } # pass requests for dynamic content to Apache location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Range ""; proxy_pass http://7.1.3.7:8080; } } Could please anyone tell me what is wrong and how this can be fixed ?

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >