Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 241/802 | < Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >

  • How does plugging in a SATA drive to an SAS backplane affect maximum cable length?

    - by user179658
    The limit on SATA cable length is 1m, whereas the limit on SAS cable length is 10m. When using a backplane which advertises support for SAS and SATA, with a SAS RAID controller and one SATA drive, will the controller use the SAS PHY scheme, allowing for the 10m cable length maximum (to accommodate the long backplane), or will it use the SATA one and allow for only the SATA cable length maximum of 1m?

    Read the article

  • How to design a data model that deals with (real) contracts?

    - by Geoffrey
    I was looking for some advice on designing a data model for contract administration. The general life cycle of a contract is thus: Contract is created and in a "draft" state. It is viewable internally and changes may be made. Contract goes out to vendor, status is set to "pending" Contract is rejected by vendor. At this state, nothing can be done to the contract. No statuses may be added to the collection. Contract is accepted by vendor. At this state, nothing can be done to the contract. No statuses may be added to the collection. I obviously want to avoid a situation where the contract is accepted and, say, the amount is changed. Here are my classes: [EnforceNoChangesAfterDraftState] public class VendorContract { public virtual Vendor Vendor { get; set; } public virtual decimal Amount { get; set; } public virtual VendorContact VendorContact { get; set; } public virtual string CreatedBy { get; set; } public virtual DateTime CreatedOn { get; set; } public virtual FileStore Contract { get; set; } public virtual IList<VendorContractStatus> ContractStatus { get; set; } } [EnforceCorrectWorkflow] public class VendorContractStatus { public virtual VendorContract VendorContract { get; set; } public virtual FileStore ExecutedDocument { get; set; } public virtual string Status { get; set; } public virtual string Reason { get; set; } public virtual string CreatedBy { get; set; } public virtual DateTime CreatedOn { get; set; } } I've omitted the filestore class, which is basically a key/value lookup to find the document based on its guid. The VendorContractStatus is mapped as a many-to-one in Nhibernate. I then use a custom validator as described here. If anything but draft is returned in the VendorContractStatus collection, no changes are allowed. Furthermore the VendorContractStatus must follow the correct workflow (you can add a rejected after a pending, but you can't add anything else to the collection if a reject or accepted exists, etc.). All sounds alright? Well a colleague has argued that we should simply add an "IsDraft" bool property to VendorContract and not accept updates if IsDraft is false. Then we should setup a method inside of VendorContractStatus for updating the status, if something gets added after a draft, it sets the IsDraft property of VendorContract to false. I do not like this as it feels like I'm dirtying up the POCOs and adding logic that should persist in the validation area, that no rules should really exist in these classes and they shouldn't be aware of their states. Any thoughts on this and what is the better practice from a DDD perspective? From my view, if in the future we want more complex rules, my way will be more maintainable over the long run. Say we have contracts over a certain amount to be approved by a manager. I would think it would be better to have a one-to-one mapping with a VendorContractApproval class, rather than adding IsApproved properties, but that's just speculation. This might be splitting hairs, but this is the first real gritty enterprise software project we've done. Any advice would be appreciated!

    Read the article

  • vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

    - by kce
    I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

    Read the article

  • How do I access a tomcat 5.5 installation via localhost running on Virtual PC 2007?

    - by MetroidFan2002
    I have a tomcat installation of 5.5 up and running on a Virtual PC with a fresh XP pro SP3. Launching tomcat gives the standard messages: INFO: Find registry server-registry.xml at classpath resource Apr 12, 2010 11:43:44 AM org.apache.catalina.startup.Catalina start INFO: Server startup in 3576 ms However, I cannot for the life of me connect to http://localhost:8080. I've also tried http://127.0.0.1:8080 with no success. This is on the virtual PC itself that I cannot connect to the server - I haven't bothered to try it on the host machine. Can anyone provide any information on why this may be happening? It's a fresh install of tomcat using Sun's JRE 5.0 (I know, EOL, technical requirements make me have to use 5.0 and not a newer JRE).

    Read the article

  • C# app fails to load Matlab DLL when running from a shared drive?

    - by jg
    I have a C# .NET 2.0 program that calls a Matlab .dll file that I created using Matlab Builder for .NET. This Matlab .dll file is a wrapper for a m file function that I need to call from my C# program. Everything works fine when I run this app from my local drive. However once I copy the app to a shared drive the Matlab dll fails when it's first loaded. I setup caspol to allow .NET programs to run from shared drives. Does anyone know what could cause this problem or a tool that I could use to easily figure out what the problem is? Thanks.

    Read the article

  • Is there a way to make vim display "virtual characters" before/after regular patterns in the buffer?

    - by Laurence Gonsalves
    Vim has list and listchars options that make vim display "virtual characters" (by which I mean characters that aren't actually in the buffer) in certain situations. For example, you can make trailing spaces look like something else, or add a visible character to represent the newline character. I'd like to be able to enable the display of certain characters either before or after certain regular patterns ((perhaps syntax items). Sort of like syntax highlighting, but instead of just changing the color/styling of characters that are in the buffer, I'd like to display extra characters that aren't in the buffer. For example, I'd like to display a virtual : (colon) after all occurrences of the word "where" that appear at the end of a line. Is this possible, and if so, what is the necessary vimscript to do it?

    Read the article

  • Virtual drivers with Windows Driver Model - where to begin?

    - by waitinforatrain
    I've never written drivers before but I'm starting an open-source project that involves creating virtual MIDI ports that will send the MIDI data over a network. For this, I presume I would be creating some sort of virtual driver using WDM (unless it's possible with kernel hooks?) - but being a beginner to driver development I don't know where to begin. Does anyone know any useful resources that would help me with this project? Or some open-source code from a similar project that I could fork as a starting point?

    Read the article

  • Can the get of a property be abstract and the set be virtual?

    - by K. Georgiev
    I have a base class like this: public class Trajectory{ public int Count { get; set; } public double Initial { get; set { Count = 1; } } public double Current { get; set { Count ++ ; } } } So, I have code in the base class, which makes the set-s virtual, but the get-s must stay abstract. So I need something like this: ... public double Initial { abstract get; virtual set { Count = 1; } } ... But this code gives an error. The whole point is to implement the counter functionality in the base class instead in all the derived classes. So, how can I make the get and set of a property with different modifiers?

    Read the article

  • How do you data drive task dependencies via properties in psake?

    - by Jordan
    In MSBuild you can data drive target dependencies by passing a item group into a target, like so: <ItemGroup> <FullBuildDependsOn Include="Package;CoreFinalize" Condition="@(FullBuildDependsOn) == ''" /> </ItemGroup> <Target Name="FullBuild" DependsOnTargets="@(FullBuildDependsOn)" /> If you don't override the FullBuildDependsOn item group, the FullBuild target defaults to depending on the Package and CoreFinalize targets. However, you can override this by defining your own FullBuildDependsOn item group. I'd like to do the same in psake - for example: properties { $FullBuildDependsOn = "Package", "CoreFinalize" } task default -depends FullBuild # this won't work because $FullBuildDependsOn hasn't been defined yet - the "Task" function will see this as a null depends array task FullBuild -depends $FullBuildDependsOn What do I need to do to data drive the task dependencies in psake?

    Read the article

  • Red Hat cluster: Failure of one of two services sharing the same virtual IP tears down IP

    - by js.
    I'm creating a 2+1 failover cluster under Red Hat 5.5 with 4 services of which 2 have to run on the same node, sharing the same virtual IP address. One of the services on each node needs a (SAN) disk, the other doesn't. I'm using HA-LVM. When I shut down (via ifdown) the two interfaces connected to the SAN to simulate SAN failure, the service needing the disk is disabled, the other keeps running, as expected. Surprisingly (and unfortunately), the virtual IP address shared by the two services on the same machine is also removed, rendering the still-running service useless. How can I configure the cluster to keep the IP address up?

    Read the article

  • How do I add/remove items to a ListView in virtual mode?

    - by Eric
    If I'm using a ListView in virtual mode then, as I understand it, the list view only keeps track of a small number of items in the list. As the user scrolls it dynamically retrieves items it needs to show from the virtual list. But what if an item is added or removed from the master list? If an item is added/removed outside of the range of indexes being shown by the list view then I would assume the list view would show the added/missing items when the user scrolls to that index. Is this correct? But what if an item is added/removed from the range of indexes the user is currently viewing? How do I trigger the list view to refresh the items it is currently viewing to show the new/missing items?

    Read the article

  • Can I get information about the IIS7 virtual directory from Application_Start?

    - by Keith
    I have 3 IIS7 virtual directories which point to the same physical directory. Each one has a unique host headers bound to it and each one runs in its own app pool. Ultimately, 3 instances of the same ASP.NET application. In the Application_Start event handler of global.asax I would like to identify which instance of the application is running (to conditionally execute some code). Since the Request object is not available, I cannot interrogate the current URL so I would like to interrogate the binding information of the current virtual directory? Since the host header binding is unique for each site, it would allow me to identify which application instance is starting up. Does anyone know how to do this or have a better suggestion?

    Read the article

  • Under Windows CE, how can I check which RAM based DLLs are loaded in virtual memory space?

    - by Michal Drozdowicz
    I have a problem with loading a DLL under Windows Mobile 5.0. I'm pretty confident that this is caused by running out of the application virtual memory (the 32 MB slot of the process, as explained in Windows CE .NET Advanced Memory Management). I'm looking for a way to actually make sure that this is the issue and investigate whether my efforts bring expected results. Do you know of a way to check the contents of the virtual memory application slot? Any applications that can help me with this task?

    Read the article

  • Xsigo and Oracle's Storage

    - by Philippe Deverchère
    Xsigo, a virtual network infrastructure provider, has recently been acquired by Oracle. Following this acquisition, one might ask ourselves why it is important to Oracle and how Oracle's storage is going to benefit on the long term from this virtualized infrastructure layer. Well, the first thing to understand is that Virtual Networking addresses both network and storage connectivity. Oracle Virtual Networking, as the Xsigo technology is now called, connects any server to any network and storage, so this is not just about connecting servers to the Internet or Intranet. It is also for a large part connecting servers to NAS and SAN storage. Connecting servers to storage has become increasingly complex in the past few years because of the strong emergence of virtualization at the Operating System level. 50% of enterprise workloads are now virtualized, up from 18% in 2009, resulting in a strong consolidation of various applications in a high density server footprint. At the same time, server I/O capability increased 8x in the last 8 years. All this has pushed IT administrators to multiply the number of I/O connections in the back-end of their physical servers, resulting in a messy and very hard to manage networking infrastructure. Here is a typical view of a rack back-end when no virtual networking is used. We consider that today: - 75% of users have ten or more Ethernet ports per server - 85% of users have two or more SAN ports per server - 58% have had to add connectivity to a server specifically for VMs - 65% consider cable reduction a priority The average is 12 or more ports per server, resulting in an extremely complex infrastructure to manage. What Oracle wants to achieve with its Oracle Virtual Networking offering is pretty simple. The objective is to eliminate the complexity through a dramatic reduction of cabling between servers and storage/networks. It is also to provide a software based management system so that any server can be connected to any network or any storage, on demand, and without physical intervention on the infrastructure. At the end of the day, the picture on the left shows what one wants to get for the back-end of customer's racks: just a couple of connections on each physical server to provide a simple, agile and fast network infrastructure for both storage and networking access. This is exactly what the Oracle Virtual Networking solution does. It transforms a complex, error-prone, difficult to manage and expensive networking infrastructure into a simple, high performance and agile solution for the data center. Practically speaking, and for the sake of simplicity, imagine that each server just hosts a minimal number of physical InfiniBand HCAs (Host Channel Adapter) with two links (for redundancy) onto the Oracle Fabric Interconnect director. Using the Oracle Fabric Manager software, you'll then be able to create virtual NICs and HBAs (called vNIC and vHBA) that will be seen by the servers as standard NICs and HBAs and associate them to networks and storage systems which are physically connected to the back-end of the director through standard Fibre Channel and Ethernet GbE/10GbE ports. In addition to this incredibly simple "at-a-click" connectivity capability, the Oracle Virtual Networking solution offers powerful features such as network isolation, Quality of Service, advanced performance monitoring and non-disruptive reconfiguration, migration and scalability of networking infrastructure. So let's go back now to our initial question: why is Oracle Virtual Networking especially important to Oracle's storage solutions? After all, one could connect any storage in the back-end of the Oracle Fabric Interconnect directors, right? The answer is pretty simple: since Oracle owns both the virtualized networking infrastructure and the storage (ZFS-SA, Pillar Axiom and tape), it is possible to imagine several ways in the future to add value when it comes to connect storage to a virtualized storage network: enhanced storage capabilities, converged management between storage and network, improved diagnostic capabilities and optimized integration resulting in higher performance and unique features/functions. Of course, all this is not going to be done overnight, and future will tell us is which evolutions come first. But there is little doubt that the integration of Xsigo within Oracle is going to create opportunities for Oracle's storage!

    Read the article

  • New Dell PE R710 - Storage Question

    - by rihatum
    Hi All, Dell PE R710, received from Dell in the following state : Windows Disk 0 1800GB ( Volume C & D ) Windows Disk 1 526 GB (Volume E ) Perc6i Integrated Raid Controller 6 x 500GB Nearline SAS 7200RPM HDDs Raid 5 Configuration with two Virtual Disks I have installed Dell open Manage and it shows the following : Virtual Disk 0 - State : Background Initialization ( 7% ) Virtual Disk 1 - State : Background Initialization ( 25% ) Now when I click on Virtual Disk 0 it shows me all 6 Disks and the same happens when I click on Virtual Disk 1 it displays all 6 disks. But when I click on Storage Perc6i Connector 0 I get 4 Physical disks with the following numbers : Physical Disk 0:0:0 Physical Disk 0:0:1 Physical Disk 0:0:2 Physical Disk 0:0:3 When I click on Storage Perc6i Connector 1 I get 2 Physical Disks Listed in the following way : Physical Disk 1:0:4 Physical Disk 1:0:5 I am a little confused in this description, does this 1:0:4 interprets to Controller1, Disk4. Does this integrated raid card have two controllers coming out of it ? Also, When I first switched on the machine, the boot partition was showing 1GB Available out of 40GB, now its showing 38GB available out of 40GB. Is this because the Virtual Disks are still Initializing ? Any recommendations or suggestions ? Also, this server have 6 x 500GB NearLine SAS Hard drives, what would be a good raid config ? We are planning to use it for Hyper-V with quite a few (7 or 8) virtual servers, your suggestions would be helpful. Also, while the virtual disks are in a initialization state, can I destroy and re-create the raid configuration ? I would have to do it at the BIOS CTRL-M ? Thanks and Regards

    Read the article

  • Sun Solaris - Find out number of processors and cores

    - by Adrian
    Our SPARC server is running Sun Solaris 10; I would like to find out the actual number of processors and the number of cores for each processor. The output of psrinfo and prtdiag is ambiguous: $psrinfo -v Status of virtual processor 0 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 1 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 2 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. Status of virtual processor 3 as of: dd/mm/yyyy hh:mm:ss on-line since dd/mm/yyyy hh:mm:ss. The sparcv9 processor operates at 1592 MHz, and has a sparcv9 floating point processor. _ $prtdiag -v System Configuration: Sun Microsystems sun4u Sun Fire V445 System clock frequency: 199 MHZ Memory size: 32GB ==================================== CPUs ==================================== E$ CPU CPU CPU Freq Size Implementation Mask Status Location --- -------- ---------- --------------------- ----- ------ -------- 0 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C0/P0 1 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C1/P0 2 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C2/P0 3 1592 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 on-line MB/C3/P0 _ $more /etc/release Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 16 August 2007 Patch Cluster - EIS 29/01/08(v3.1.5) What other methods can I use? EDITED: It looks like we have a 4 processor system with one core each: $psrinfo -p 4 _ $psrinfo -pv The physical processor has 1 virtual processor (0) UltraSPARC-IIIi (portid 0 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (1) UltraSPARC-IIIi (portid 1 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (2) UltraSPARC-IIIi (portid 2 impl 0x16 ver 0x34 clock 1592 MHz) The physical processor has 1 virtual processor (3) UltraSPARC-IIIi (portid 3 impl 0x16 ver 0x34 clock 1592 MHz)

    Read the article

  • How to bypass resume from hibernate

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

    - by Paul Hale
    I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

    Read the article

  • Backup software for incremental swapped-out drives?

    - by user13743
    We're using Acronis Home 11 to backup our main Windows machine at the office. We have a set of portable hard drives that we swap out each week, for redundancy. We have incremental sets ( a new diff of the entire series each night) building on each drive. However, from time to time, Acronis gets confused and sometimes makes a new full backup. This eats up a lot of drive on the disks. Also, I have to trick the Acronis script each time I swap out a drive and point it to the new incremental backup set. Finally, if a drive gets full, there's no way to partition the backup set on a drive. I found this out the hard way, and now one drive is full with one backup set. So now on the other drive, I have three folders of backup sets. When one starts to get full, I delete the oldest one and start a new set. That way one single drive never gets filled up with one single backup set. I'm looking for a backup software that can backup Windows in incremental sets, and doesn't get tripped up with swapped out drives. Is there a better solution?

    Read the article

  • Possible boot conflict?

    - by Evan Kroske
    I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

    Read the article

  • How to install a desktop environment onto Ubuntu Server -- but without internet access or a CDROM?

    - by James
    I am playing around with a computer which has no CDROM drive or internet access and I have installed Ubuntu Server onto it. I have that all up and running nicely but now I'd like to install Xfce, GNOME or something similar so I can load up a desktop environment from the command line if I wish. Obviously with internet access or a CDROM, this would be a simple task of using apt-get and it finding & retrieving the packages for me, I assume, but I do not have either. I do however have a USB drive and I have used Unetbootin to make it into a bootable drive with the Ubuntu Server disk image files on there. I have mounted the USB drive to /media/usb0 and tried the command "sudo apt-cdrom add -d /media/usb0" to get apt to recognise the USb drive as an "Ubuntu CD" -- a source of package files but apt-get doesn't seem to be finding Xfce.. I try "sudo apt-get install xfce" and "sudo apt-get install xfce4" but neither find the package.. I would prefer to have Xfce but GNOME would be OK too.. My question is, am I doing something wrong? I figured that the Ubuntu Server disk (or rather, my Ubuntu Server USB drive) might not have any desktop environment packages on there so I tried the Xubuntu Desktop disk too (again, from my USB drive). I tried "sudo apt-get install xubuntu-desktop" but it couldn't find the package - even though it is listed under the /casper/ directory in some MANIFEST file. Anyone see where I'm going wrong? Maybe apt-get install is looking somewhere other than my USB drive? Maybe my commands are wrong? Maybe the disks don't even have the desktop environments on!? Thanks in advance guys, any input would be much appreciated. Cheers - James

    Read the article

< Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >