Search Results

Search found 7473 results on 299 pages for 'usage statistics'.

Page 242/299 | < Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >

  • Is there a low carbon future for the retail industry?

    - by user801960
    Recently Oracle published a report in conjunction with The Future Laboratory and a global panel of experts to highlight the issue of energy use in modern industry and the serious need to reduce carbon emissions radically by 2050.  Emissions must be cut by 80-95% below the levels in 1990 – but what can the retail industry do to keep up with this? There are three key aspects to the retail industry where carbon emissions can be cut:  manufacturing, transport and IT.  Manufacturing Naturally, manufacturing is going to be a big area where businesses across all industries will be forced to make considerable savings in carbon emissions as well as other forms of pollution.  Many retailers of all sizes will use third party factories and will have little control over specific environmental impacts from the factory, but retailers can reduce environmental impact at the factories by managing orders more efficiently – better planning for stock requirements means economies of scale both in terms of finance and the environment. The John Lewis Partnership has made detailed commitments to reducing manufacturing and packaging waste on both its own-brand products and products it sources from third party suppliers. It aims to divert 95 percent of its operational waste from landfill by 2013, which is a huge logistics challenge.  The John Lewis Partnership’s website provides a large amount of information on its responsibilities towards the environment. Transport Similarly to manufacturing, tightening up on logistical planning for stock distribution will make savings on carbon emissions from haulage.  More accurate supply and demand analysis will mean less stock re-allocation after initial distribution, and better warehouse management will mean more efficient stock distribution.  UK grocery retailer Morrisons has introduced double-decked trailers to its haulage fleet and adjusted distribution logistics accordingly to reduce the number of kilometers travelled by the fleet.  Morrisons measures route planning efficiency in terms of cases moved per kilometre and has, over the last two years, increased the number of cases per kilometre by 12.7%.  See Morrisons Corporate Responsibility report for more information. IT IT infrastructure is often initially overlooked by businesses when considering environmental efficiency.  Datacentres and web servers often need to run 24/7 to handle both consumer orders and internal logistics, and this both requires a lot of energy and puts out a lot of heat.  Many businesses are lowering environmental impact by reducing IT system fragmentation in their offices, while an increasing number of businesses are outsourcing their datacenters to cloud-based services.  Using centralised datacenters reduces the power usage at smaller offices, while using cloud based services means the datacenters can be based in a more environmentally friendly location.  For example, Facebook is opening a massive datacentre in Sweden – close to the Arctic Circle – to reduce the need for artificial cooling methods.  In addition, moving to a cloud-based solution makes IT services more easily scaleable, reducing redundant IT systems that would still use energy.  In store, the UK’s Carbon Trust reports that on average, lighting accounts for 25% of a retailer’s electricity costs, and for grocery retailers, up to 50% of their electricity bill comes from refrigeration units.  On a smaller scale, retailers can invest in greener technologies in store and in their offices.  The report concludes that widely shared objectives of energy security, reduced emissions and continued economic growth are dependent on the development of a smart grid capable of delivering energy efficiency and demand response, as well as integrating renewable and variable sources of energy. The report is available to download from http://emeapressoffice.oracle.com/imagelibrary/detail.aspx?MediaDetailsID=1766I’d be interested to hear your thoughts on the report.   

    Read the article

  • CodePlex Daily Summary for Sunday, May 09, 2010

    CodePlex Daily Summary for Sunday, May 09, 2010New ProjectsArtificial Spy: ASPX, C#, XML, This is big project for creation application for: People Search. People connection. Background check. Crime Prevention. Socia...Chef Framework: CHEF: CSS, HTML, Events, & Functions. Is a collection of libraries to help build concerns separated websites.Crabit Full File Manger: File manager SystemEPiMVC - EPiServer CMS with ASP.NET MVC: A framework for using EPiServer CMS with ASP.NET MVC.Fimyid IX: all My projects In ONE!Hosting Folder Sizes: When you run a hosting environment with the ability to upload files, and you're charging per gigabyte per month, you need quick statistics about di...Let's Up: A tool that breaks you every 50 minutes to protect your health.MediaXenter: MediaXenterMSClub BY: Microsoft community web-site projectOrbisArca: Windows Mobile gameSpatial Gateway: A common and standardized way of accessing spatial data stored in different datastores. This also includes functionality for replication across dif...Squiggle - A Free open source Lan Messenger: Squiggle is a free lan messenger that does not require a server. Just download and run it and you're ready to talk to everyone on your lan. Squi...Video Downloader: Video Downloader makes it easier for developers to generate download links for videos from You-Tube. You'll no longer have to search through source...ViewModelSupport: This is not an MVVM framework. It is just the base class I use to reduce the friction when writing ViewModels. Making it public to share my ideas.WPF CCTV Surveillance Control with IP Cameras.: Integracion de Video IP en WPF. IP Camera. WPF dinamic Control and Events in Video System. Surveillance system. CCTV system. .NetNew Releases.NET Extensions - Extension Methods Library: Release 2010.07: Added some extension methods for ICollection<T> and IList<T> for demonstrating the differences between both interfaces: - ICollection<T>.AddRangeU...bitly.net: bitly.dll: This is a .net DLL that works with the on-line URL shortening service bit.ly Compiled using .net 4.0 but the source code should run with version 2 ...Crabit Full File Manger: Crabit V1.0: Firts file manager system previewCSharp Intellisense: V1.9: this is a major release that was focus on bug fix, tooltip support and styling.Fimyid IX: fimyid ix 1.0: New Liscence!Gherkin editor: Beta: Added support for i18n (all languages supported by Gherkin/Cucumber are suported). Removed auto-completion of statements like As a user and followi...Grunty OS: GruntyOSAlphaSC: Grunty os sourceHKGolden Express: HKGoldenExpress (Build 201005081830): New features: Users can post new message or reply to a message. Special thanks for help from members 劉佳偉 (ID: 179892) and Maize. (ID: 142974). Bu...iLove SharePoint: Lookup Field with Picker 2010: Just forget the fuc**** dropdowns! Requirements: SharePoint Foundation 2010 Features * Single- and multi-Selection Mode * Search in pick...LazyNet: LazyNet Beta 2: Refresh Network Bug fixed.LazyNet: LazyNEt_Beta3: Beta 3 Release, Better Network RefreshingLazyNet: LazyNetBeta3_SRC: Refresh NetworkLet's Up: 1.0 (Build 100509): This is the first versionLive Distributed Objects: Windows Installer r48444 (2010-05-08): current development snapshotMDownloader: MDownloader-0.15.12.58576: Fixed presenting Hotfile's captcha. Fixed FilesTube searching. Fixed determining Rapidshare postpone period. Fixed minor bugs.NSIS Autorun: NSIS Autorun 0.1.7: This release includes source code, executable binaries and example materials.SharpDevelop: SharpDevelop 3.2: Release notes: http://community.sharpdevelop.net/forums/t/11165.aspxSilverlight SDK for Bing: Silverlight SDK for Bing 1.4: Build for Visual Studio 2010 and Silverlight 4 Issues Addressed10337 10342 10367 10804 10805 10806 10807 DownloadsSilverlight SDK For B...sqwarea: Sqwarea 0.0.252.0 (alpha): This release corrects a critical bug in Persistence.GameProvider.GetNextKingId. We strongly recommend you to upgrade to this version.Stratosphere: Stratosphere 1.0.5.1: Added many features to Amazon Web Services Shell (AwsSh) Improved scalable table reader for SimpleDB multi-valued attributes Added more functio...TechEdOneNoter: TechEdOneNoter verison 2010.5.9.2010: TechEdOneNoter is a utility to create OneNote Pages based on sessions selected in the TechEd North America 2010 Session Builder. This is the first...Video Downloader: Version 1.0: Version 1.0 See Home Page for usage and more information. Please remember changes at You-Tube can prevent this software from working.Visual Studio - Lua Language Support: May 8th Update: Release NotesThis release adds collapsible functions and tables. What's new:Collapsible functions and tables Using latest version of Irony Maj...WPF CCTV Surveillance Control with IP Cameras.: Hungry Foxx CCTV Preview: Este release, corresponde a una muestra del programa completo. La idea es poder contar con una solucion para los integradores de sistemas CCTV o d...XsltDb - DotNetNuke XSLT module: 01.01.08: Bugs fixed: 17204 17203 Many new features, but undocumented yet. I'm going to update docs in a week or two, but...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesASP.NETPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrThe Information Literacy Education Learning Environment (ILE)AJAX Control FrameworkCaliburn: An Application Framework for WPF and SilverlightMirror Testing SystemjQuery Library for SharePoint Web Servicespatterns & practices - UnityBlogEngine.NETTweetSharp

    Read the article

  • Three Easy Ways of Providing Feedback to the Oracle AutoVue Team

    - by Celine Beck
    Customer feedback is essential in helping us deliver best-in-class Enterprise Visualization solutions which are centered around real-world usage. As the Oracle AutoVue Product Management team is busy prioritizing the next round of improvements, enhancements and new innovation to the AutoVue platform, I thought it would be a good idea to provide our blog-readers with a recap of how best to provide product feedback to the AutoVue Product Management team. This gives you the opportunity to help shape our future agenda and make our solutions better for you. Enterprise Visualization Special Interest Group (EV SIG): the AutoVue EV SIG is a customer-driven initiative that has recently been created to share knowledge and information between members and discuss common and best practices around Enterprise Visualization. The EV SIG also serves as a mechanism for establishing and communicating to AutoVue Product Management users’ collective priorities for the future development, direction and enhancement of the AutoVue product family with the objective of ensuring their continuous improvement. Essentially, EV SIG members meet in order to share and prioritize feedback and use this input to begin dialog with the AutoVue Product Management team on what they deem to be the most important improvements to Enterprise Visualization solutions. The AutoVue EV SIG is by far the best platform for sharing and relaying feedback to our Product Strategy / Management team regarding general product enhancements, industry-specific scenarios, new use cases, usability, support, deployability, etc, and helping us shape the future direction of Enterprise Visualization solutions. We strongly encourage ALL our customers to sign up for the SIG;  here is how you can do so: Sign up for the EVSIG mailing list b.    Visit the group’s website c.    Contact Dennis Walker at Harris Corporation directly should you have any questions: dwalke22-AT-harris-DOT-com Customer / Partner Advisory Boards: The AutoVue Product Strategy / Management team also periodically runs Customer and Partner Advisory Boards. These invitation-only events bring together individuals chosen from Oracle AutoVue’s top customers that are using AutoVue at the enterprise level, as well as strategic partners.  The idea here is to establish open lines of communication between top customers and partners and the Oracle AutoVue Product Strategy team, help us communicate AutoVue’s product direction, share perspectives on today and tomorrow’s challenges and needs for Enterprise Visualization, and validate that proposed additions to the product are valid industry solutions. Our next Customer / Partner Advisory Board will be held in San Francisco during Oracle Open World, please contact your account manager to find out more about the CAB Members’ nomination process. Enhancement Requests:  Enhancement requests are request logged by customers or partners with Product Development for a feature that is not currently available in Oracle AutoVue. Enhancement requests (ER) can be logged easily via the My Oracle Support portal. This is the best way to share feedback with us at the functionality level; for instance if you would like to see a new format supported in AutoVue or make suggestions as per how certain functionality can be improved or should behave. Once the ER is logged, it is then evaluated by Product Management based on feasibility, product adequation and business justification. Product Management then decides whether to consider this ER for future release or not. What helps accelerate the process is hearing from a large number of customers who urgently need a particular feature or configuration. Hence the importance of logging Metalink Service Requests, and describing in details your business expectations. You can include key milestones dates and justifications as to why this request is important and the benefits your organization stands to gain should this request be accepted. Again, feedback from customers and partners is critical to ensure we offer solutions that have the biggest impact on customers’ business processes and day-to-day operations. All feedback is welcome,. So please don’t be shy! 

    Read the article

  • Why It Is So Important to Know Your Customer

    - by Christie Flanagan
    Over the years, I endured enough delayed flights, air turbulence and misadventures in airport security clearance to watch my expectations for the air travel experience fall to abysmally low levels. The extent of my loyalty to any one carrier had more to do with the proximity of the airport parking garage to their particular gate than to any effort on the airline’s part to actually earn and retain my business. That all changed one day when I found myself at the airport hoping to catch a return flight home a few hours earlier than expected, using an airline I had flown with for the first time just that week.  When you travel regularly for business, being able to catch a return flight home that’s even an hour or two earlier than originally scheduled is a big deal. It can mean the difference between having a normal evening with your family and having to sneak in like a cat burglar after everyone is fast asleep. And so I found myself on this particular day hoping to catch an earlier flight home. I approached the gate agent and was told that I could go on standby for their next flight out. Then I asked how much it was going to cost to change the flight, knowing full well that I wouldn’t get reimbursed by my company for any change fees. “Oh, there’s no charge to fly on standby,” the gate agent told me. I made a funny look. I couldn’t believe what I was hearing. This airline was going to let my fly on standby, at no additional charge, even though I was a new customer with no status or points. It had been years since I’d seen an airline pass up a short term revenue generating opportunity in favor of a long term loyalty generating one.  At that moment, this particular airline gained my loyal business. Since then, this airline has had the opportunity to learn a lot about me. They know where I live, where I fly from, where I usually fly to, and where I like to sit on the plane. In general, I’ve found their customer service to be quite good whether at the airport, via call center and even through social channels. They email me occasionally, and when they do, they demonstrate that they know me by promoting deals for flights from where I live to places that I’d be interested in visiting. And that’s part of why I’m always so puzzled when I visit their website.Does this company with the great service, customer friendly policies, and clean planes demonstrate that they know me at all when I visit their website? The answer is no. Even when I log in using my loyalty program credentials, it’s pretty obvious that they’re presenting the same old home page and same old offers to every single one of their site visitors. I mean, those promotional offers that they’re featuring so prominently  -- they’re for flights that originate thousands of miles from where I live! There’s no way I’d ever book one of those flights and I’m sure I’m not the only one of their customers to feel that way.My reason for recounting this story is not to pick on the one customer experience flaw I've noticed with this particular airline, in fact, they do so many things right that I’ll continue to fly with them. But I did want to illustrate just how glaringly obvious it is to customers today when a touch point they have with a brand is impersonal, unconnected and out of sync. As someone who’s spent a number of years in the web experience management and online marketing space, it particularly peeves me when that out of sync touch point is a brand’s website, perhaps because I know how important it is to make a customer’s online experience relevant and how many powerful tools are available for making a relevant experience a reality. The fact is, delivering a one-size-fits-all online customer experience is no longer acceptable or particularly effective in today’s world. Today’s savvy customers expect you to know who they are and to understand their preferences, behavior and relationship with your brand. Not only do they expect you to know about them, but they also expect you to demonstrate this knowledge across all of their touch points with your brand in a consistent and compelling fashion, whether it be on your traditional website, your mobile web presence or through various social channels.Delivering the kind of personalized online experiences that customers want can have tremendous business benefits. This is not just about generating feelings of goodwill and higher customer satisfaction ratings either. More relevant and personalized online experiences boost the effectiveness of online marketing initiatives and the statistics prove this out. Personalized web experiences can help increase online conversion rates by 70% -- that’s a huge number.1  And more than three quarters of consumers indicate that they’ve made additional online purchases based on personalized product recommendations.2Now if only this airline would get on board with delivering a more personalized online customer experience. I’d certainly be happier and more likely to spring for one of their promotional offers. And by targeting relevant offers on their home page to appropriate segments of their site visitors, I bet they’d be happier and generating additional revenue too. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}  ***** If you're interested in hearing more perspectives on the benefits of demonstrating that you know your customers by delivering a more personalized experience, check out this white paper on creating a successful and meaningful customer experience on the web.  Also catch the video below on the business value of CX in attracting new customers featuring Oracle's VP of Customer Experience Strategy, Brian Curran. 1 Search Engine Watch 2 Marketing Charts

    Read the article

  • CodePlex Daily Summary for Sunday, June 06, 2010

    CodePlex Daily Summary for Sunday, June 06, 2010New ProjectsActive Worlds Dot Net Wrapper (Based on AwSdk): Active Worlds Dot Net Wrapper (Based on AwSdk)Combina: Smart calculator for large combinatorial calculations.Concurrent Cache: ConcurrentCache is a smart output cache library extending OutputCacheProvider. It consists of in memory, cache files and compressed files modes and...Decay: Personal use. For learningFazTalk: FazTalk is a suite of tools and products that are designed to improve collaboration and workflow interactions. FazTalk takes an innovative approach...grouped: A peer to peer text editor, written in C# [update] I wrote this little thing a while back and even forgot about it, I stopped coding for more tha...HitchARide MVC 2 Sample: An MVC 2 sample written as part of the Microsoft 2010 London Web Camp based on the wireframes at http://schematics.earthware.co.uk/hitcharide. Not...Inspiration.Web: Description: A simple (but entertaining) ASP.NET MVC (C#) project to suggest random code names for projects. Intended audience: People who ne...NetFileBrowser - TinyMCE: tinyMCE file plugin with asp.netOil Slick Live Feeds: All live feeds from BP's Remotely Operated VehiclesParticle Lexer: Parser and Tokenizer libraryPdf Form Tool: Pdf Form Tool demonstrates how the iTextSharp library could be used to fill PDF forms. The input data is provided as a csv file. The application ...Planning Poker Windows Mobile 7: This project is a Planning Poker application for Windows Mobile 7 (and later?). RandomRat: RandomRat is a program for generating random sets that meet specific criteriaScience.NET: A scientific library written in managed code. It supports advanced mathematics (algebra system, sequences, statistics, combinatorics...), data stru...Spider Compiler: Spider Compiler parses the input of a spider programming source file and compiles it (with help of csc.exe; the C#-Compiler) to an exe-file. This p...Sununpro: sunun's project for study by team foundation server.TFS Buddy: An application that manipulates your I-Buddy whenever something happens in your Team Foundation ServerValveSoft: ValveSysWiiMote Physics: WiiMote Physics is an application that allows you to retrieve data from your WiiMote or Balance Board and display it in real-time. It has a number...WinGet: WinGet is a download manager for Windows. You can drag links onto the WinGet Widget and it will download a file on the selected folder. It is dev...XProject.NET: A project management and team collaboration platformNew Releases.NET DiscUtils: Version 0.9 Preview: This release is still under development. New features available in this release: Support for accessing short file names stored in WIM files Incr...Active Worlds Dot Net Wrapper (Based on AwSdk): Active World Dot Net Wrapper (0.0.1.85): Based on AwSdk 85AwSdk UnOfficial Wrapper Howto Use: C# using AwWrapper; VB.Net Import AwWrapperAjaxControlToolkit additional extenders: ZhecheAjaxControls for .NET3.5: Used AJAX Control Toolkit Release Notes - April 12th 2010 Release Version 40412. Fixed deadlock in long operation canceling Some other fixesAnyCAD: AnyCAD.v1.2.ENU.Install: http://www.anycad.net Parametric Modeling *3D: Sphere, Box, Cylinder, Cone •2D: Line, Rectangle, Arc, Arch, Circle, Spline, Polygon •Feature: Extr...Community Forums NNTP bridge: Community Forums NNTP Bridge V29: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Concurrent Cache: 1.0: This is the first release for the ConcurrentCache library.Configuration Section Designer: 2.0.0: This is the first Beta Release for VS 2010 supportDoxygen Browser Addin for VS: Doxygen Browser Addin - v0.1.4 Beta: Support for Visual Studio 2010 improved the logging of errors (Event Logs) Fixed some issues/bugs Hot key for navigation "Control + F1, Contr...Folder Bookmarks: Folder Bookmarks 1.6.2: The latest version of Folder Bookmarks (1.6.2), with new UI changes. Once you have extracted the file, do not delete any files/folders. They are n...HERB.IQ: Beta 0.1 Source code release 5: Beta 0.1 Source code release 5Inspiration.Web: Initial release (deployment package): Initial release (deployment package)NetFileBrowser - TinyMCE: Demo Project: Demo ProjectNetFileBrowser - TinyMCE: NetFileBrowser: NetImageBrowserNLog - Advanced .NET Logging: Nightly Build 2010.06.05.001: Changes since the last build:2010-06-04 23:29:42 Jarek Kowalski Massive update to documentation generator. 2010-05-28 15:41:42 Jarek Kowalski upda...Oil Slick Live Feeds: Oil Slick Live Feeds 0.1: A the first release, with feeds from the MS Skandi, Boa Deep C, Enterprise and Q4000. They are live streams from the ROV's monitoring the damaged...Pcap.Net: Pcap.Net 0.7.0 (46671): Pcap.Net - June 2010 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes...sqwarea: Sqwarea 0.0.289.0 (alpha): API supportTFS Buddy: TFS Buddy First release (Beta 1): This is the first release of the TFS Buddy.Visual Studio DSite: Looping Animation (Visual C++ 2008): A solider firing a bullet that loops and displays an explosion everytime it hits the edge of the form.WiiMote Physics: WiiMote Physics v4.0: v4.0.0.1 Recovered from existing compiled assembly after hard drive failure Now requires .NET 4.0 (it seems to make it run faster) Added new c...WinGet: Alpha 1: First Alpha of WinGet. It includes all the planned features but it contains many bugs. Packaged using 7-Zip and ClickOnce.Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)PHPExcelpatterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsCommunity Forums NNTP bridgeRawrpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSIonics Isapi Rewrite FilterStyleCopsmark C# LibraryFarseer Physics Enginepatterns & practices: Composite WPF and Silverlight

    Read the article

  • Cannot ping Localhost so I can't shutdown Tomcat

    - by gav
    Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

    Read the article

  • Offre d’emploi – Job Offer - Montreal

    - by guybarrette
    I’m currently helping a client plan its management systems re-architecture and they are looking to hire a full time .NET developer.  It’s a small 70 people company located in the Old Montreal, you’ll be the sole dev there and you’ll use the latest technologies in re writing their core systems. Here’s the job offer in French: Concepteur de logiciel et programmeur-analyste .NET chevronné (poste permanent à temps plein) Employeur : Traductions Serge Bélair inc. Ville : Montreal QC TRSB, cabinet de traduction en croissance rapide regroupant à l’interne une des équipes de professionnels les plus compétentes et les plus diversifiées du secteur de la traduction au Canada, désire combler le poste de : Le concepteur de logiciel et programmeur-analyste .Net sera responsable de la conception, du développement complet et de l’implantation d’une solution clés en main personnalisée pour répondre aux besoins de l’entreprise. Il réalisera la conception, la programmation, la documentation, les tests, le dépannage et la maintenance du nouveau système de gestion des opérations de l’entreprise utilisant des bases de données et offrant une grande souplesse pour la production de rapports. S’il est nécessaire de faire appel à des fournisseurs ou à des consultants pour la réalisation du projet, il sera responsable de trouver les ressources requises, devra assurer les communications avec ces ressources et voir à l’exécution du travail. Il sera également appelé à mettre à jour et à maintenir les applications actuellement utilisées dans l’entreprise jusqu’à ce que l’application développée puisse être utilisée. Les principales tâches du concepteur et programmeur-analyste chevronné recherché seront les suivantes : Concevoir et développer un nouveau système de gestion des opérations en fonction des besoins d’exploitation de l’entreprise Trouver les ressources externes et internes requises Assurer les communications et le suivi avec des fournisseurs externes (p. ex., programmeurs, analystes ou architectes) Assumer la responsabilité de la mise en place du nouveau système de gestion des opérations Résoudre les problèmes liés au nouveau système de gestion des opérations Assurer le soutien les soirs de semaine et la fin de semaine (au besoin), principalement avec des outils de travail à distance Maintenir la documentation du système de gestion des opérations à jour Exécuter d’autres tâches connexes Exigences Baccalauréat en informatique ou l’équivalent Au moins 5 années d’expérience pertinente 2 ans et plus d'expérience en programmation C# Excellente connaissance en programmation d’applications Web avec bases de données Excellente connaissance en méthodologie structurée de développement et des techniques de programmation itératives Habiletés à procéder à la récolte d’informations ainsi que la rédaction de documents d’analyse Spécialisations techniques Essentielle - Design et programmation orientée objet avec C#, ASP.NET, .NET Framework 3.5, AJAX Importante - Silverlight 3, WCF, LINQ, SQL Server, Team Foundation Server Atout - Entity Framework, MVC, jQuery, MySQL, QuickBooks, Suite d’outils Telerik Technologies utilisées C# 4.0, Visual Studio 2010, Team Foundation Server 2010, LINQ, ASP.NET, ASP.NET MVC, jQuery, WCF, Silverlight 4, SQL Server 2008, MySQL, QuickBooks, Suite d’outils Telerik Qualités recherchées Bilinguisme oral et écrit Sens élevé des responsabilités Autonomie Sens de l’initiative Volonté de dépassement Leadership et aptitudes à la prise de décisions Motivation élevée Minutie et souci du détail Bon sens de l’organisation Souplesse et bonne capacité d’adaptation au changement Une expérience antérieure du développement de logiciel avec flux de processus et modules de facturation, de l’établissement de ponts entre des bases de données de types différents (Quickbooks et SQL p. ex.) et des outils d’aide à la traduction serait un atout important. Excellentes conditions de travail : salaire et avantages sociaux très concurrentiels, milieu de travail stimulant dans un environnement agréable, dans le Vieux-Montréal. Faire parvenir votre CV et votre lettre de motivation à [email protected] TRSB 276, rue Saint-Jacques, bureau 900 Montréal (Québec) H2Y 1N3 L’usage du générique masculin a pour seul but d’alléger le texte et d’en faciliter la lecture. var addthis_pub="guybarrette";

    Read the article

  • JDBC Triggers

    - by Tim Dexter
    Received a question from a customer last week, they were using the new rollup patch on top of 10.1.3.4.1. What are these boxes for? Don't you know? Surely? Well, they are for ... that new functionality, you know it's in the user docs, that thingmabobby doodah. OK, I dont know either, I can have a guess but let me check first. Serveral IM sessions, emails and a dig through the readme for the new patch and I had my answer. Its not in the official documentation, yet. Leslie is on the case. The two fields were designed to allow an Admin to set a users context attributes before a connection is made to a database and for un-setting the attributes after the connection is broken by the extraction engine. We got a sample from the Enterprise Manager team on how they will be using it with their VPD connections. FUNCTION bip_to_em_user (user_name_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETEMUSERCONTEXT(user_name_in, MGMT_USER.OP_SET_IDENTIFIER); return TRUE; END bip_to_em_user; And used in the jdbc data source definition like this (pre-process function): sysman.mgmt_bip.bip_to_em_user(:xdo_user_name) You, of course can call any function that is going to return a boolean value, another example might be. FUNCTION set_per_process_username (username_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETUSERCONTEXT(username_in); return TRUE; END set_per_process_username Just use your own function/package to set some user context. Very grateful for the mail from Leslie on the EM team's usage but I had to try it out. Rather than set up a VPD, I opted for a simpler test. Can I log the comings and goings of users and their queries using the same pre-process text box. Reaching back into the depths of my developer brain to remember some pl/sql, it was not that deep and I came up with: CREATE OR REPLACE FUNCTION BIPTEST (user_name_in IN VARCHAR2, smode IN VARCHAR2) RETURN BOOLEAN AS BEGIN INSERT INTO LOGTAB VALUES(user_name_in, sysdate,smode); RETURN true; END BIPTEST; To call it in the pre-fetch trigger. BIPTEST(:xdo_user_name) Not going to set the pl/sql world alight I know, but you get the idea. As a new connection is made to the database its logged in the LOGTAB table. The SMODE value just sets if its an entry or an exit. I used the pre- and post- boxes. NAME UPDATE_DATE S_FLAG oracle 14-MAY-10 09.51.34.000000000 AM Start oracle 14-MAY-10 10.23.57.000000000 AM Finish administrator 14-MAY-10 09.51.38.000000000 AM Start administrator 14-MAY-10 09.51.38.000000000 AM Finish oracle 14-MAY-10 09.51.42.000000000 AM Start oracle 14-MAY-10 09.51.42.000000000 AM Finish It works very well, I had some fun trying to find a nasty query for the extraction engine so that the timestamps from in to out actually had a difference. That engine is fast! The only derived value you can pass from BIP is :xdo_user_name. None of the other server values are available. Connection pools are not currently supported but planned for a future release. Now you know what those fields are for and look for some official documentation, rather than my ramblings, coming soon!

    Read the article

  • OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam

    - by JuergenKress
    OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam This September during Oracle OpenWorld 2013 the weather in San Francisco, as you see can from the photo, was exceptionally sunny. The dramatic final few days of the Americas Cup sailing competition, being held every day in the bay, coincided with the conference and meant that there was almost a holiday feel to the whole event. Here's my annual round-up of what I think was most interesting at OpenWorld 2013 for Fusion Middleware architects and administrators; I hope you find it useful and if you think I've missed something please add a comment! WebLogic and Cloud Application Foundation (CAF) The big WebLogic release of the year has already happened a few months ago with 12.1.2 so I won't duplicate that here. Will Lyons discussed the WebLogic and Coherence roadmap which essentially is that 12.1.3 will probably be released to coincide with SOA 12c next year and that 12.1.4, the next feature-rich WebLogic release, is more likely to be in 2015. This latter release will probably include full Java EE 7 support, have enhancements for multi-tenancy and further auto-scaling features to support increased density (i.e. more WebLogic usage for the same amount of hardware). There's a new Oracle Virtual Assembly Builder (OVAB) out already and an Oracle Traffic Director (OTD) 12c release round the corner too. Also of relevance to administrators is that Oracle has increased the support lifetime for Fusion Middleware 11g (e.g. WebLogic 10.3.6) so that Premier Support will now run to the end of 2018 and Extended Support until 2021 - this should remove any Oracle-driven pressure to upgrade at least. Java Mission Control Java Mission Control (JMC) is the HotSpot Java 7 version of JRockit 6 Mission Control, a very nice performance monitoring tool from Oracle's BEA acquisition. Flight Recorder is a feature built into the JVM which records diagnostic events into, typically, a circular buffer which can then be used for historical analysis, particularly in the case of a JVM crash or hang. It's been available separately for WebLogic only for perhaps a year now but, more significantly, it now includes JVM events and was bundled in with JDK7 Update 40 a few weeks ago. I attended a couple of interesting Java One sessions on JMC/Flight Recorder and have to say it's looking really good - it has all the previous JRMC features except for memory leak detector, plus some enhancements around operative sets and ECID filtering I think. Marcus also showed how you could add your own events into flight recorder by building your own event class - they are then available for graphing alongside all the other events in JMC. This uses a currently an unsupported/undocumented API, but it's also the same one that WebLogic uses for WLDF events so I imagine it is stable. I'm not sure quite whether this would be useful to custom applications, as opposed to infrastructure services or ISV packaged applications, but it was a very nice demonstration. I've been testing JMC / FR enabling on several environments recently and my confidence is growing - it feels robust and I think could very soon be part of my standard builds. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: OOW,Simon Haslam,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Ardour wont start Jack problem

    - by Drew S
    I downloaded Ardour yesterday, it worked, edited an audio file done. Come back today it wont start I get this: Ardour could not start JACK There are several possible reasons: 1) You requested audio parameters that are not supported.. 2) JACK is running as another user. Please consider the possibilities, and perhaps try different parameters. So I try and look at qjackctl to see what happening there. When I try to start JACK I get D-BUS: JACK server could not be started. then Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. and this is the message box in JACK. 15:22:12.927 Patchbay deactivated. 15:22:12.927 Statistics reset. 15:22:12.944 ALSA connection change. 15:22:12.951 D-BUS: Service is available (org.jackaudio.service aka jackdbus). Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:22:12.959 ALSA connection graph change. 15:22:45.850 ALSA connection graph change. 15:22:46.021 ALSA connection change. 15:22:56.492 ALSA connection graph change. 15:22:56.624 ALSA connection change. 15:23:42.340 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:23:42 2013: Starting jack server... Wed Oct 23 15:23:42 2013: JACK server starting in realtime mode with priority 10 Wed Oct 23 15:23:42 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:23:42 2013: Acquired audio card Audio0 Wed Oct 23 15:23:42 2013: creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit Wed Oct 23 15:23:42 2013: ERROR: ATTENTION: The playback device "hw:0" is already in use. The following applications are using your soundcard(s) so you should check them and stop them as necessary before trying to start JACK again: pulseaudio (process ID 2553) Wed Oct 23 15:23:42 2013: ERROR: Cannot initialize driver Wed Oct 23 15:23:42 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:23:42 2013: ERROR: Failed to open server Wed Oct 23 15:23:43 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:41.669 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:49.006 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:48 2013: Starting jack server... Wed Oct 23 15:26:48 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:48 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:48 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:48 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:48 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:48 2013: ERROR: Failed to open server Wed Oct 23 15:26:50 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:52.441 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:55.997 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:55 2013: Starting jack server... Wed Oct 23 15:26:55 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:55 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:55 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:55 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:55 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:55 2013: ERROR: Failed to open server Wed Oct 23 15:26:57 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:59.054 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:29:24.624 ALSA connection graph change. 15:29:24.641 ALSA connection change. 15:33:11.760 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:33:11 2013: Starting jack server... Wed Oct 23 15:33:11 2013: JACK server starting in non-realtime mode Wed Oct 23 15:33:11 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:33:11 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:33:11 2013: ERROR: Cannot initialize driver Wed Oct 23 15:33:11 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:33:11 2013: ERROR: Failed to open server Wed Oct 23 15:33:12 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:34:09.439 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started

    Read the article

  • DNS request timed out. timeout was 2 seconds

    - by sahil007
    i had setup bind dns server on centos. from local lan it will work fine but from remote when i tried to nslookup ..it will give reply like "DNS request timed out...timeout was 2 seconds." what is the problem? this is my bind config---- // Red Hat BIND Configuration Tool options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; query-source address * port 53; }; controls { inet 127.0.0.1 allow {localhost; } keys {rndckey; }; }; acl internals { 127.0.0.0/8; 192.168.0.0/24; 10.0.0.0/8; }; view "internal" { match-clients { internals; }; recursion yes; zone "mydomain.com" { type master; file "mydomain.com.zone"; }; zone "0.168.192.in-addr.arpa" { type master; file "0.168.192.in-addr.arpa.zone"; }; zone "." IN { type hint; file "named.root"; }; zone "localdomain." IN { type master; file "localdomain.zone"; allow-update { none; }; }; zone "localhost." IN { type master; file "localhost.zone"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa." IN { type master; file "named.local"; allow-update { none; }; }; zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa." I N { type master; file "named.ip6.local"; allow-update { none; }; }; zone "255.in-addr.arpa." IN { type master; file "named.broadcast"; allow-update { none; }; }; zone "0.in-addr.arpa." IN { type master; file "named.zero"; allow-update { none; }; }; }; view "external" { match-clients { any; }; recursion no; zone "mydomain.com" { type master; file "mydomain.com.zone"; // file "/var/named/chroot/var/named/mydomain.com.zone"; }; zone "0.168.192.in-addr.arpa" { type master; file "0.168.192.in-addr.arpa.zone"; }; }; include "/etc/rndc.key";

    Read the article

  • Diagnosing packet loss / high latency in Ubuntu

    - by Sam Gammon
    We have a Linux box (Ubuntu 12.04) running Nginx (1.5.2), which acts as a reverse proxy/load balancer to some Tornado and Apache hosts. The upstream servers are physically and logically close (same DC, sometimes same-rack) and show sub-millisecond latency between them: PING appserver (10.xx.xx.112) 56(84) bytes of data. 64 bytes from appserver (10.xx.xx.112): icmp_req=1 ttl=64 time=0.180 ms 64 bytes from appserver (10.xx.xx.112): icmp_req=2 ttl=64 time=0.165 ms 64 bytes from appserver (10.xx.xx.112): icmp_req=3 ttl=64 time=0.153 ms We receive a sustained load of about 500 requests per second, and are currently seeing regular packet loss / latency spikes from the Internet, even from basic pings: sam@AM-KEEN ~> ping -c 1000 loadbalancer PING 50.xx.xx.16 (50.xx.xx.16): 56 data bytes 64 bytes from loadbalancer: icmp_seq=0 ttl=56 time=11.624 ms 64 bytes from loadbalancer: icmp_seq=1 ttl=56 time=10.494 ms ... many packets later ... Request timeout for icmp_seq 2 64 bytes from loadbalancer: icmp_seq=2 ttl=56 time=1536.516 ms 64 bytes from loadbalancer: icmp_seq=3 ttl=56 time=536.907 ms 64 bytes from loadbalancer: icmp_seq=4 ttl=56 time=9.389 ms ... many packets later ... Request timeout for icmp_seq 919 64 bytes from loadbalancer: icmp_seq=918 ttl=56 time=2932.571 ms 64 bytes from loadbalancer: icmp_seq=919 ttl=56 time=1932.174 ms 64 bytes from loadbalancer: icmp_seq=920 ttl=56 time=932.018 ms 64 bytes from loadbalancer: icmp_seq=921 ttl=56 time=6.157 ms --- 50.xx.xx.16 ping statistics --- 1000 packets transmitted, 997 packets received, 0.3% packet loss round-trip min/avg/max/stddev = 5.119/52.712/2932.571/224.629 ms The pattern is always the same: things operate fine for a while (<20ms), then a ping drops completely, then three or four high-latency pings (1000ms), then it settles down again. Traffic comes in through a bonded public interface (we will call it bond0) configured as such: bond0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:5d inet addr:50.xx.xx.16 Bcast:50.xx.xx.31 Mask:255.255.255.224 inet6 addr: <ipv6 address> Scope:Global inet6 addr: <ipv6 address> Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:527181270 errors:1 dropped:4 overruns:0 frame:1 TX packets:413335045 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240016223540 (240.0 GB) TX bytes:104301759647 (104.3 GB) Requests are then submitted via HTTP to upstream servers on the private network (we can call it bond1), which is configured like so: bond1 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:5c inet addr:10.xx.xx.70 Bcast:10.xx.xx.127 Mask:255.255.255.192 inet6 addr: <ipv6 address> Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:430293342 errors:1 dropped:2 overruns:0 frame:1 TX packets:466983986 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:77714410892 (77.7 GB) TX bytes:227349392334 (227.3 GB) Output of uname -a: Linux <hostname> 3.5.0-42-generic #65~precise1-Ubuntu SMP Wed Oct 2 20:57:18 UTC 2013 x86_64 GNU/Linux We have customized sysctl.conf in an attempt to fix the problem, with no success. Output of /etc/sysctl.conf (with irrelevant configs omitted): # net: core net.core.netdev_max_backlog = 10000 # net: ipv4 stack net.ipv4.tcp_ecn = 2 net.ipv4.tcp_sack = 1 net.ipv4.tcp_fack = 1 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_timestamps = 1 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_max_syn_backlog = 10000 net.ipv4.tcp_congestion_control = cubic net.ipv4.ip_local_port_range = 8000 65535 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_thin_dupack = 1 net.ipv4.tcp_thin_linear_timeouts = 1 net.netfilter.nf_conntrack_max = 99999999 net.netfilter.nf_conntrack_tcp_timeout_established = 300 Output of dmesg -d, with non-ICMP UFW messages suppressed: [508315.349295 < 19.852453>] [UFW BLOCK] IN=bond1 OUT= MAC=<mac addresses> SRC=118.xx.xx.143 DST=50.xx.xx.16 LEN=68 TOS=0x00 PREC=0x00 TTL=51 ID=43221 PROTO=ICMP TYPE=3 CODE=1 [SRC=50.xx.xx.16 DST=118.xx.xx.143 LEN=40 TOS=0x00 PREC=0x00 TTL=249 ID=10220 DF PROTO=TCP SPT=80 DPT=53817 WINDOW=8190 RES=0x00 ACK FIN URGP=0 ] [517787.732242 < 0.443127>] Peer 190.xx.xx.131:59705/80 unexpectedly shrunk window 1155488866:1155489425 (repaired) How can I go about diagnosing the cause of this problem, on a Debian-family Linux box?

    Read the article

  • concurrency::accelerator_view

    - by Daniel Moth
    Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • RTL (Arabic and Hebrew) Support for Windows Phone 7

    - by Daniel Moth
    Problem and Background Currently there is no support for Right-To-Left rendering in Windows Phone 7, when developing with Silverlight (itself built on .NET Compact Framework). When I encountered that limitation, I had a flashback to 2005 when I complained about the luck of RTL on NETCF. Unfortunately, the partial solution I proposed back then requires PInvoke and there is no such support on Windows Phone today. Fortunately, my RTL requirements this time were more modest: all I wanted to do was display correctly a translation (of Hebrew or Arabic) in my FREE WP7 translator app. For v1.0 of the app, the code received a string from the service and just put it up on the screen as the translated text. In Arabic and Hebrew, that string (incorrectly) appeared reversed. I knew that, but decided that since it is a platform limitation, I could live with it and so could the users. Yuval P, a colleague at Microsoft, pushed me to offer support for Hebrew (something that I wasn't motivated to pursue if I am honest). After many back and forths, we landed on some code that works. It is certainly not the most efficient code (quite the opposite), but it works and met the bar of minimum effort for v1.1. Thanks Yuval for insisting and contributing most of the code! After Hebrew support was there, I thought the same solution would work for Arabic. Apparently, reversing the Arabic text is not enough: Arabic characters render themselves differently dependent on what preceded/succeeds them(!). So I needed some kind of utility that takes a reversed Arabic string and returns the same string but with the relevant characters "fixed". Luckily, another MS colleague has put out such a library (thanks Bashar): http://arabic4wp7.codeplex.com/. RTL Solution So you have a reversed RTL string and want to make it "right" before displaying on the screen. This is what worked for me (ymmv). Need to split the string into "lines". Not doing this and just reversing the string and sticking it a wrapping text control means that the user not only has to read right to left, they also have to read bottom up. The previous step must take into account a line length that works for both portrait and landscape modes, and of course, not break words in the middle, i.e. find natural breaks. For each line, break it up into words and reverse the order of the words and the order of the letters within each word On the previous step, do not reverse words that should be preserved, e.g. Windows and other such English words that are mixed in with the Arabic or Hebrew words. The same exclusion from reversal applies to numbers. Specifically, for Arabic, once there is a word that is reversed also change its characters. For some code paths, the above has to take into account whether the translation is "from" an RTL language or if it is "to" an RTL language. I packaged the solution in a single code file containing a static class (see the 'Background" section above for… background and credits). Download RTL.cs for your Windows Phone app (to see its usage in action download for FREE "The best translator app") Enjoy, and if you decide to improve on the code, feel free to share back with me… Comments about this post welcome at the original blog.

    Read the article

  • SQL SERVER – Discard Results After Query Execution – SSMS

    - by pinaldave
    The first thing I do any day is to turn on the computer. Today I woke up and as soon as I turned on the computer I saw a chat message from a friend. He was a bit confused and wanted me to help him. Just as usual I am keeping the relevant conversation in focus and documenting our conversation as chat. Let us call him Ajit. Ajit: Pinal, every time I run a query there is no result displayed in the SSMS but when I run the query in my application it works and returns an appropriate result. Pinal:  Have you tried with different parameters? Ajit: Same thing. However, it works from another computer when I connect to the same server with the same query parameters? Pinal: What? That is new and I believe it is something to do with SSMS and not with the server. Send me screenshot please. Ajit: I believe so, let me send you a screenshot, Pinal: (looking at the screenshot) Oh man, there is no result-tab at all. Ajit: That is what the problem is. It does not have the tab which displays the result. This works just fine from another computer. Pinal: Have you referred Nakul’s blog post – SSMS – Query result options – Discard result after query executes, that talks about setting which can discard the query results after execution. (After a while) Ajit: I think it seems like on the computer where I am running the query my SSMS seems to have the option enabled related to discarding results. I fixed it by following Nakul’s blog post. Pinal: Great! Quite often I get the question what is the importance of the feature. Let us first see how to turn on or turn off this feature in SQL Server Management Studio 2012. In SSMS 2012 go to Tools >> Options >> Query Results > SQL Server >> Results to Grid >> Discard Results After Query Execution. When enabled this option will discard results after the execution. The advantage of disabling the option is that it will improve the performance by using less memory. However the real question is why would someone enable or disable the option. What are the cases when someone wants to run the query but do not care about the result? Matter of the fact, it does not make sense at all to run query and not care about the result. The matter of the fact, I can see quite a few reasons for using this option. I often enable this option when I am doing performance tuning exercise. During performance tuning exercise when I am working with execution plans and do not need results to verify every time or when I am tuning Indexes and its effect on execution plan I do not need the results. In this kind of situations I do keep this option on and discard the results. It always helps me big time as in most of the performance tuning exercise I am dealing with huge amount of the data and dealing with this data can be expensive. Nakul’s has done the experiment here already but I am going to repeat the same again using AdventureWorks Database. Run following T-SQL Script with and without enabling the option to discard the results. USE AdventureWorks2012 GO SELECT * FROM Sales.SalesOrderDetail GO 10 After enabling Discard Results After Query Execution After disabling Discard Results After Query Execution Well, this is indeed a good option when someone is debugging the execution plan or does not want the result to be displayed. Please note that this option does not reduce IO or CPU usage for SQL Server. It just discards the results after execution and a good help for debugging on the development server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to configure DNS Server on Fedora

    - by user863873
    I want to learn how to configure my home PC server into a web server with domain and host. My IP is 109.99.141.133 and now points to a phpinfo page host on my home server. My registed domain is: anunta-anunturi.ro I searched for a tutorial and I've read that I have to configure /etc/named.conf and the file sources for the new zone that I create. So, from the tutorials, my /etc/named.conf looks like this: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { localhost; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "anunta-anunturi.ro" IN { type master; file "/etc/anunta-anunturi.db"; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; My /etc/anunta-anunturi.db file looks like this — I'm not sure if this is okay, or if it's the easy one. $TTL 86400 anunta-anunturi.ro. IN SOA serveur.anunta-anunturi.ro. root.serveur.anunta-anunturi.ro. ( 1997022700 ; Serial 28800 ; Refresh 14400 ; Retry 3600000 ; Expire 86400 ) ; Minumun IN NS serveur.anunta-anunturi.ro. IN MX 10 mail.anunta-anunturi.ro. serveur.anunta-anunturi.ro. IN A 192.168.1.37 www.anunta-anunturi.ro. IN A 192.168.1.37 mail.anunta-anunturi.ro. IN A 192.168.1.37 Extra info: At home I receive internet from my ISP through a router. My home PC and server recieve their IP automatically from the router when I start/restart. In my local home network, my server receives the IP 192.168.1.37 from the router. When I enter 109.99.141.133 in my browser, it points to the rooter that forwards port 80 to local IP 192.168.1.37 (my home server) Questions: Are my two files good? What/where is my nameserver that I need to copy/paste to my top level domain (where I registered my domain: rotld.ro)?

    Read the article

  • Wget works, Ping doesn't

    - by derty
    There are some anomalies on a Virtuozzo virtualized Debian 4 (I know, I'm gonna upgrade this one asap, but there dependences). We run some Websites on this one. And a view Days ago exmi4 wasnt able to send mails to SOME people. I'll use live.com as exampledomain! So some of this people got mails and some didn't. Some of the mails got stuck in the queue, and after 2 days they went out!! My Nagios never showed problems with the internet connection or disk space Now i wanted to install "dig" to look how he's solving the dns request. And this Debian tells me he doesn't know dig.. Long story made short, Debian is able to download sites with exact IP or even with wget live.com, but it is not able to ping live.com. I'm 99% sure that the networking is right and the routing too! Some examples of my tring below: wget live.com downloads the site ping live.com ping http://www.live.com ping http://live.com returns: ping: unknown host live.com EDIT: i now use heise.de not live.com any more. and i found out i can ping the heise.de server by using it's IP-address. myserver:~# ping 193.99.144.85 PING 193.99.144.85 (193.99.144.85) 56(84) bytes of data. 64 bytes from 193.99.144.85: icmp_seq=1 ttl=248 time=12.7 ms 64 bytes from 193.99.144.85: icmp_seq=2 ttl=248 time=12.6 ms 64 bytes from 193.99.144.85: icmp_seq=3 ttl=248 time=12.9 ms 64 bytes from 193.99.144.85: icmp_seq=4 ttl=248 time=13.1 ms 64 bytes from 193.99.144.85: icmp_seq=5 ttl=248 time=13.1 ms --- 193.99.144.85 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4001ms rtt min/avg/max/mdev = 12.671/12.924/13.163/0.238 ms EDIT 2: myserver:/etc/apt# dig heise.de ; <<>> DiG 9.3.4-P1.2 <<>> heise.de ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40551 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 5, ADDITIONAL: 3 ;; QUESTION SECTION: ;heise.de. IN A ;; ANSWER SECTION: heise.de. 2266 IN A 193.99.144.80 ;; AUTHORITY SECTION: heise.de. 1622 IN NS ns.pop-hannover.de. heise.de. 1622 IN NS ns.s.plusline.de. heise.de. 1622 IN NS ns.plusline.de. heise.de. 1622 IN NS ns2.pop-hannover.net. heise.de. 1622 IN NS ns.heise.de. ;; ADDITIONAL SECTION: ns.plusline.de. 265 IN A 212.19.48.14 ns.pop-hannover.de. 5113 IN A 193.98.1.200 ns2.pop-hannover.net. 15150 IN A 62.48.67.66 ;; Query time: 2 msec ;; SERVER: 193.200.112.80#53(193.200.112.80) ;; WHEN: Tue Oct 9 13:03:50 2012 ;; MSG SIZE rcvd: 216

    Read the article

  • MIX 2010 Covert Operations Day 2 Silverlight + Windows 7 Phone

    - by GeekAgilistMercenary
    Left the Circus Circus and headed to the geek circus at Mandalay Bay.  Got in, got some breakfast, met a few more people and headed to the keynote. Upon arriving the crew I was hanging with at the event; Erik Mork, Beth Murray, and Brian Henderson and I were entertained with several other thousand geeks by the wicked yo-yoing. The first video demo of something was of Bing Maps and various aspects of Microsoft Research integrated together.  Namely the pictures, put in place, on real 3d element maps of various environments. Silverlight Scott Guthrie, as one would guess, kicked off the keynote.  His first point was that user experience has become a priority at Microsoft.  This can be seen by any observant soul with the release and push of Expression, Silverlight, and the other tools.  This is even more apparent when one takes note of Microsoft bringing in people that can actually do good design and putting them at the forefront. The next thing Scott brought up was a few key points about Silverlight.  Currently Silverlight is a little over 2 years old and has achieved a pretty solid 60% penetration.  Silverlight has all sorts of capabilities that have been developed and are now provided as open source including;  ad injection, smoothing, playback editing, and more.  Another thing he showed, which really struck me as awesome being in the analytics space, was the Olympics and a quick glimpse of the ad statistics, viewer experience, video playback performance, audience trends, and overall viewer participation.  All of it rendered in Silverlight in beautiful detail. The key piece of Scott's various points were all punctuated with the fact that all of this code is available as open source.  Not only is Microsoft really delving into this design element of things, they're getting involved in the right ways. One of the last points I'll bring up about Silverlight 4 is the ability to have HD video on a monitor, and an entirely different activity being done on the other monitor, effectively making Silverlight the only RIA framework that supports multi-monitor support.  Overall, Silverlight is continuing to impress – providing superior capabilities tit-for-tat with the competition. Windows 7 Phone The Windows 7 Phone has 3 primary buttons (yes, more than the iPhone, don't let your mind explode!!).  Start, Search, and Back control all of the needed functionality of the phone.  At the same time, of course, there is the multi-touch, touch, and other interactive abilities of the interface.  The intent, once start is pressed is to have all the information that a phone owner wants displayed immediately.  Avoiding the scrolling through pages of apps or rolling a ball to get through multitudes of other non-interactive phone interfaces.  The Windows 7 Phone simply has the data right in front of you, basically a phone dashboard.  From there it is easy to dive into the interactive areas of the phone. Each area of the interface of the phone is broken into hubs.  These hubs include applications, data, and other things based on a relative basis.  This basis being determined by the user.  These applications interact on many other levels, and form a kind of relationship between each other adding more and more meta-data to the phone user, their interactions between the applications, and of course the social element of their interactions on the phone.  This makes this phone a practical must have for a marketer involved in social media.  The level of wired together interaction is massive, and of course, if you've seen Office Outlook 2010 you know that the power that is pulled into the phone by being tied to Outlook is massive. Joe Belfiore also showed several UI & specifically UX elements of the phone interface that allows paging to be instinctual by simple clipped items, flipping page to page, and other excellent user experience advances for phone devices.  Belfiore's also showed how his people hub had a massive list of people, with pictures, all from various different social networks and other associated relations.  The rendering, speed, and viewing of these people's, their pictures, their social network information, and other characteristics was smooth and in some situations unbelievably rendered.  This demo showed some of the great power of the beta phone, which isn't even as powerful as the planned end device. Joe finished up by jumping into the music, videos, and other media with the Zune Component of the Windows 7 Mobile Phone.  This was all good stuff, but I'll get to what really sold me on the media element in a moment. When Joe was done, Scott Guthrie stepped back up to walk through building a Windows 7 Mobile Phone.  This is were I have to give serious props.  He built this application, in Visual Studio 2010, in front of 2000+ people.  That was cool, but what really was amazing that he build the application in about 2 minutes.  The IDE, side by side design that is standard in Visual Studio is light years ahead of x-Code or any of the iPhone IDEs.  The Windows 7 Mobile System, if it can get market penetration, poses a technologically superior development and phone platform over anything on the market right now.  The biggest problem with the phone, is it just isn't available yet.  I personally can't wait for a chance to build some apps for the new Windows Phone. Netflix, I May Start Up an Account Again! When I get my Windows 7 Phone device, I am absolutely getting a Netflix account again.  The Vertigo crew, as I wrote on Twitter "#MIX10 Props @seesharp on @netflix demo", displayed an application on the phone for Netflix that actually ran HD Video of Rescue Me (with Dennis Leary).  The video played back smooth as it would on a dedicated computer, I was instantly sold.  So this didn't actually sell me on the phone, because I'm already sold, but it did sell me whole heartedly on the media capabilities of the pending phone. Anyway, I try not to do this but I may double post today.  Lunch is over and I'm off to another session very near and dear to the heart of my occupation, Analytics Tracking.  Stay tuned and I should have that post up by the end of the day. Original Post – Check out my other blog for even more technical ramblings and reads.

    Read the article

  • Review: A Quick Look at Reflector

    - by James Michael Hare
    I, like many, was disappointed when I heard that Reflector 7 was not free, and perhaps that’s why I waited so long to try it and just kept using my version 6 (which continues to be free).  But though I resisted for so long, I longed for the better features that were being developed, and began to wonder if I should upgrade.  Thus, I began to look into the features being offered in Reflector 7.5 to see what was new. Multiple Editions Reflector 7.5 comes in three flavors, each building on the features of the previous version: Standard – Contains just the Standalone application ($70) VS – Same as Standard but adds Reflector Object Browser for Visual Studio ($130) VSPro – Same as VS but adds ability to set breakpoints and step into decompiled code ($190) So let’s examine each of these features. The Standalone Application (Standard, VS, VSPro editions) Popping open Reflector 7.5 and looking at the GUI, we see much of the same familiar features, with a few new ones as well: Most notably, the disassembler window now has a tabbed window with navigation buttons.  This makes it much easier to back out of a deep-dive into many layers of decompiled code back to a previous point. Also, there is now an analyzer which can be used to determine dependencies for a given method, property, type, etc. For example, if we select System.Net.Sockets.TcpClient and hit the Analyze button, we’d see a window with the following nodes we could expand: This gives us the ability to see what a given type uses, what uses it, who exposes it, and who instantiates it. Now obviously, for low-level types (like DateTime) this list would be enormous, but this can give a lot of information on how a given type is connected to the larger code ecosystem. One of the other things I like about using Reflector 7.5 is that it does a much better job of displaying iterator blocks than Reflector 6 did. For example, if you were to take a look at the Enumerable.Cast() extension method in System.Linq, and dive into the CastIterator in Reflector 6, you’d see this: But now, in Reflector 7.5, we see the iterator logic much more clearly: This is a big improvement in the quality of their code disassembler and for me was one of the main reasons I decided to take the plunge and get version 7.5. The Reflector Object Browser (VS, VSPro editions) If you have the .NET Reflector VS or VSPro editions, you’ll find you have in Visual Studio a Reflector Object Browser window available where you can select and decompile any assembly right in Visual Studio. For example, if you want to take a peek at how System.Collections.Generic.List<T> works, you can either select List<T> in the Reflector Object Browser, or even simpler just select a usage of it in your code and CTRL + Click to dive in. – And it takes you right to a source window with the decompiled source: Setting Breakpoints and Stepping Into Decompiled Code (VSPro) If you have the VSPro edition, in addition to all the things said above, you also get the additional ability to set breakpoints in this decompiled code and step through it as if it were your own code: This can be a handy feature when you need to see why your code’s use of a BCL or other third-party library isn’t working as you expect. Summary Yes, Reflector is no longer free, and yes, that’s a bit of a bummer. But it always was and still is a very fine tool. If you still have Reflector 6, you aren’t forced to upgrade any longer, but getting the nicer disassembler (especially for iterator blocks) and the handy VS integration is worth at least considering upgrading for.  So I leave it up to you, these are some of the features of Reflector 7.5, what’s your thoughts? Technorati Tags: .NET,Reflector

    Read the article

  • Tuning Red Gate: #3 of Lots

    - by Grant Fritchey
    I'm drilling down into the metrics about SQL Server itself available to me in the Analysis tab of SQL Monitor to see what's up with our two problematic servers. In the previous post I'd noticed that rg-sql01 had quite a few CPU spikes. So one of the first things I want to check there is how much CPU is getting used by SQL Server itself. It's possible we're looking at some other process using up all the CPU Nope, It's SQL Server. I compared this to the rg-sql02 server: You can see that there is a more, consistently low set of CPU counters there. I clearly need to look at rg-sql01 and capture more specific data around the queries running on it to identify which ones are causing these CPU spikes. I always like to look at the Batch Requests/sec on a server, not because it's an indication of a problem, but because it gives you some idea of the load. Just how much is this server getting hit? Here are rg-sql01 and rg-sql02: Of the two, clearly rg-sql01 has a lot of activity. Remember though, that's all this is a measure of, activity. It doesn't suggest anything other than what it says, the number of requests coming in. But it's the kind of thing you want to know in order to understand how the system is used. Are you seeing a correlation between the number of requests and the CPU usage, or a reverse correlation, the number of requests drops as the CPU spikes? See, it's useful. Some of the details you can look at are Compilations/sec, Compilations/Batch and Recompilations/sec. These give you some idea of how the cache is getting used within the system. None of these showed anything interesting on either server. One metric that I like (even though I know it can be controversial) is the Page Life Expectancy. On the average server I expect see a series of mountains as the PLE climbs then drops due to a data load or something along those lines. That's not the case here: Those spikes back in January suggest that the servers weren't really being used much. The PLE on the rg-sql01 seems to be somewhat consistent growing to 3 hours or so then dropping, but the rg-sql02 PLE looks like it might be all over the map. Instead of continuing to look at this high level gathering data view, I'm going to drill down on rg-sql02 and see what it's done for the last week: And now we begin to see where we might have an issue. Memory on this system is getting flushed every 1/2 hour or so. I'm going to check another metric, scans: Whoa! I'm going back to the system real quick to look at some disk information again for rg-sql02. Here is the average disk queue length on the server: and the transfers Right, I think I have a guess as to what's up here. We're seeing memory get flushed constantly and we're seeing lots of scans. The disks are queuing, especially that F drive, and there are lots of requests that correspond to the scans and the memory flushes. In short, we've got queries that are scanning the data, a lot, so we either have bad queries or bad indexes. I'm going back to the server overview for rg-sql02 and check the Top 10 expensive queries. I'm modifying it to show me the last 3 days and the totals, so I'm not looking at some maintenance routine that ran 10 minutes ago and is skewing the results: OK. I need to look into these queries that are getting executed this much. They're generating a lot of reads, but which queries are generating the most reads: Ow, all still going against the same database. This is where I'm going to temporarily leave SQL Monitor. What I want to do is connect up to the server, validate that the Warehouse database is using the F:\ drive (which I'll put money down it is) and then start seeing what's up with these queries. Part 1 of the Series Part 2 of the Series

    Read the article

  • Some thoughts on email hosting for one’s own domain

    - by jamiet
    I have used the same email providers for my own domains for a few years now however I am considering moving over to a new provider. In this email I’ll share my current thoughts and hopefully I’ll get some feedback that might help me to decide on what to do next. What I use today I have three email addresses that I use primarily (I have changed the domains in this blog post as I don’t want to give them away to spammers): [email protected] – My personal account that I give out to family and friends and which I use to register on websites [email protected]  - An account that I use to catch email from the numerous mailing lists that I am on [email protected] – I am a self-employed consultant so this is an account that I hand out to my clients, my accountant, and other work-related organisations Those two domains (jtpersonaldomain.com & jtworkdomain.com) are both managed at http://domains.live.com which is a fantastic service provided by Microsoft that for some perplexing reason they never bother telling anyone about. It offers multiple accounts (I have seven at jtpersonaldomain.com though as already stated I only use two of them) which are accessed via Outlook.com (formerly Hotmail.com) along with usage reporting plus a few other odds and sods that I never use. Best of all though, its totally free. In addition, given that I have got both domains hosted using http://domains.live.com I can link my various accounts together and switch between them at Outlook.com without having to login and logout: N.B. You’ll notice that there are two other accounts listed there in addition to the three I already mentioned. One is my mum’s account which helps me provide IT support/spam filtering services to her and the other is the donation account for AdventureWorks on Azure. I find that linking feature to be very handy indeed. Finally, http://domains.live.com is the epitome of “it just works”. I set up jtworkdomain.com at http://domains.live.com over three years ago and I am pretty certain I haven’t been back there even once to administer it. Proposed changes OK, so if I like http://domains.live.com so much why am I considering changing? Well, I earn my corn in the Microsoft ecosystem and if I’m reading the tea-leaves correctly its looking increasingly likely that the services that I’m going to have to be familiar with in the future are all going to be running on top of and alongside Windows Azure Active Directory and Office 365 respectively. Its clear to me that Microsoft’s are pushing their customers toward cloud services and, like it or lump it, data integration developers like me may have to come along for the ride. I don’t think the day is too far off when we can log into Windows Azure SQL Database (aka SQL Azure), Team Foundation Service, Dynamics etc… using the same credentials that are currently used for Office 365 and over time I would expect those things to get integrated together a lot better – that integration will be based upon a Windows Azure Active Directory identity. This should not come as a surprise, in my opinion Microsoft’s whole enterprise play over the past 15 or 20 years can be neatly surmised as “get people onto Windows Server and Active Directory then upsell from there” – in the not-too-distant-future the only difference is that they’re trying to do it in the cloud. I want to get familiar with these services and hence I am considering moving jtworkdomain.com onto Office 365. I’ll lose the convenience of easily being able to switch to that account at Outlook.com and moreover I’ll have to start paying for it (I think it’ll be about fifty quid a year – not a massive amount but its quite a bit more than free) but increasingly this is beginning to look like a move I have to make. So that’s where my head is at right now. Anyone have any relevant thoughts or experiences to share? Please let me know in the comments below. @Jamiet

    Read the article

  • BizTalk 2009 - Architecture Decisions

    - by StuartBrierley
    In the first step towards implementing a BizTalk 2009 environment, from development through to live, I put forward a proposal that detailed the options available, as well as the costs and benefits associated with these options, to allow an informed discusion to take place with the business drivers and budget holders of the project.  This ultimately lead to a decision being made to implement an initial BizTalk Server 2009 environment using the Standard Edition of the product. It is my hope that in the long term, as projects require it and allow, we will be looking to implement my ideal recommendation of a multi-server enterprise level environment, but given the differences in cost and the likely initial work load for the environment this was not something that I could fully recommend at this time.  However, it must be noted that this decision was made in full awareness of the limits of the standard edition, and the business drivers of this project were made fully aware of the risks associated with running without the failover capabilities of the enterprise edition. When considering the creation of this new BizTalk Server 2009 environment, I have also recommended the creation of the following pre-production environments:   Usage Environment Development Development of solutions; Unit testing against technical specifications; Initial load testing; Testing of deployment packages;  Visual Studio; BizTalk; SQL; Client PCs/Laptops; Server environment similar to Live implementation; Test Testing of Solutions against business and technical requirements;  BizTalk; SQL; Server environment similar to Live implementation; Pseudo-Live As Live environment to allow testing against Live implementation; Acts as back-up hardware in case of failure of Live environment; BizTalk; SQL; Server environment identical to Live implementation; The creation of these differing environments allows for the separation of the various stages of the development cycle.  The development environment is for use when actively developing a solution, it is a potentially volatile environment whose state at any given time can not be guaranteed.  It allows developers to carry out initial tests in an environment that is similar to the live environment and also provides an area for the testing of deployment packages prior to any release to the test environment. The test environment is intended to be a semi-volatile environment that is similar to the live environment.  It will change periodically through the development of a solution (or solutions) but should be otherwise stable.  It allows for the continued testing of a solution against requirements without the worry that the environment is being actively changed by any ongoing development.  This separation of development and test is crucial in ensuring the quality and control of the tested solution. The pseudo-live environment should be considered to be an almost static environment.  It should mimic the live environment and can act as back up hardware in the case of live failure.  This environment acts as an area to allow for “as live” testing, where the performance and behaviour of the live solutions can be replicated.  There should be relatively few changes to this environment, with software releases limited to “release candidate” level releases prior to going live. Whereas the pseudo-live environment should always mimic the live environment, to save on costs the development and test servers could be implemented on lower specification hardware.  Consideration can also be given to the use of a virtual server environment to further reduce hardware costs in the development and test environments, indeed this virtual approach can also be extended to pseudo-live and live assuming the underlying technology is in place. Although there is no requirement for the development and test server environments to be identical to live, the overriding architecture implemented should be the same as in live and an understanding must be gained of the performance differences to be expected across the different environments.

    Read the article

  • Users loggin to 3Com switches authenticated by radius not getting admin priv and no access available

    - by 3D1L
    Hi, Following the setup that I have for my Cisco devices, I got some basic level of functionality authenticating users that loggin to 3Com switches authenticated against a RADIUS server. Problem is that I can not get the user to obtain admin privileges. I'm using Microsoft's IAS service. According to 3Com documentation when configuring the access policy on IAS the value of 010600000003 have to be used to specify admin access level. That value have to be input in the Dial-in profile section: 010600000003 - indicates admin privileges 010600000002 - manager 010600000001 - monitor 010600000000 - visitor Here is the configuration on the switch: radius scheme system server-type standard primary authentication XXX.XXX.XXX.XXX accounting optional key authentication XXXXXX key accounting XXXXXX domain system scheme radius-scheme system local-user admin service-type ssh telnet terminal level 3 local-user manager service-type ssh telnet terminal level 2 local-user monitor service-type ssh telnet terminal level 1 The configuration is working with the IAS server because I can check user login events with the Eventviewer tool. Here is the output of the DISPLAY RADIUS command at the switch: [4500]disp radius SchemeName =system Index=0 Type=standard Primary Auth IP =XXX.XXX.XXX.XXX Port=1645 State=active Primary Acct IP =127.0.0.1 Port=1646 State=active Second Auth IP =0.0.0.0 Port=1812 State=block Second Acct IP =0.0.0.0 Port=1813 State=block Auth Server Encryption Key= XXXXXX Acct Server Encryption Key= XXXXXX Accounting method = optional TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12 Permitted send realtime PKT failed counts =5 Retry sending times of noresponse acct-stop-PKT =500 Quiet-interval(min) =5 Username format =without-domain Data flow unit =Byte Packet unit =1 Total 1 RADIUS scheme(s). 1 listed Here is the output of the DISPLAY DOMAIN and DISPLAY CONNECTION commands after users log into the switch: [4500]display domain 0 Domain = system State = Active RADIUS Scheme = system Access-limit = Disable Domain User Template: Idle-cut = Disable Self-service = Disable Messenger Time = Disable Default Domain Name: system Total 1 domain(s).1 listed. [4500]display connection Index=0 ,Username=admin@system IP=0.0.0.0 Index=2 ,Username=user@system IP=xxx.xxx.xxx.xxx On Unit 1:Total 2 connections matched, 2 listed. Total 2 connections matched, 2 listed. [4500] Here is the DISP RADIUS STATISTICS: [4500] %Apr 2 00:23:39:957 2000 4500 SHELL/5/LOGIN:- 1 - ecajigas(xxx.xxx.xxx.xxx) in un it1 logindisp radius stat state statistic(total=1048): DEAD=1046 AuthProc=0 AuthSucc=0 AcctStart=0 RLTSend=0 RLTWait=2 AcctStop=0 OnLine=2 Stop=0 StateErr=0 Received and Sent packets statistic: Unit 1........................................ Sent PKT total :4 Received PKT total:1 Resend Times Resend total 1 1 2 1 Total 2 RADIUS received packets statistic: Code= 2,Num=1 ,Err=0 Code= 3,Num=0 ,Err=0 Code= 5,Num=0 ,Err=0 Code=11,Num=0 ,Err=0 Running statistic: RADIUS received messages statistic: Normal auth request , Num=1 , Err=0 , Succ=1 EAP auth request , Num=0 , Err=0 , Succ=0 Account request , Num=1 , Err=0 , Succ=1 Account off request , Num=0 , Err=0 , Succ=0 PKT auth timeout , Num=0 , Err=0 , Succ=0 PKT acct_timeout , Num=3 , Err=1 , Succ=2 Realtime Account timer , Num=0 , Err=0 , Succ=0 PKT response , Num=1 , Err=0 , Succ=1 EAP reauth_request , Num=0 , Err=0 , Succ=0 PORTAL access , Num=0 , Err=0 , Succ=0 Update ack , Num=0 , Err=0 , Succ=0 PORTAL access ack , Num=0 , Err=0 , Succ=0 Session ctrl pkt , Num=0 , Err=0 , Succ=0 RADIUS sent messages statistic: Auth accept , Num=0 Auth reject , Num=0 EAP auth replying , Num=0 Account success , Num=0 Account failure , Num=0 Cut req , Num=0 RecError_MSG_sum:0 SndMSG_Fail_sum :0 Timer_Err :0 Alloc_Mem_Err :0 State Mismatch :0 Other_Error :0 No-response-acct-stop packet =0 Discarded No-response-acct-stop packet for buffer overflow =0 The other problem is that when the RADIUS server is not available I can not log in to the switch. The switch have 3 local accounts but none of them works. How can I specify the switch to use the local accounts in case that the RADIUS service is not available?

    Read the article

  • SQL SERVER – Speed Up! – Parallel Processes and Unparalleled Performance – TechEd 2012 India

    - by pinaldave
    TechEd India 2012 is just around the corner and I will be presenting there on two different session. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. Just like doctors I like to call my every attempt to improve the performance of SQL Server queries and database server as a practice too. I have been working with SQL Server for more than 8 years and I believe that many of the performance tuning concept I have mastered. However, performance tuning is not a simple subject. However there are occasions when I feel stumped, there are occasional when I am not sure what should be the next step. When I face situation where I cannot figure things out easily, it makes me most happy because I clearly see this as a learning opportunity. I have been presenting in TechEd India for last three years. This is my fourth time opportunity to present a technical session on SQL Server. Just like every other year, I decided to present something different, something which I have spend years of learning. This time, I am going to present about parallel processes. It is widely believed that more the CPU will improve performance of the server. It is true in many cases. However, there are cases when limiting the CPU usages have improved overall health of the server. I will be presenting on the subject of Parallel Processes and its effects. I have spent more than a year working on this subject only. After working on various queries on multi-CPU systems I have personally learned few things. In coming TechEd session, I am going to share my experience with parallel processes and performance tuning. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get maximum performance out of any query – one has to master various aspects of the parallel processes. In this deep dive session, we will explore this complex subject with a very simple interactive demo. An attendee will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Stretch in multiple components using af:popup, af:region, af:panelTabbed

    - by Arvinder Singh
    Case study: I have a pop-up(dialogue) that contains a region(separate taskflow) showing a tab. The contents of this tab is in a region having a separate taskflow. The jsff page of this taskflow contains a panelSplitter which in turn contains a table. In short the components are : pop-up(dialogue) --> region(separate taskflow) --> tab --> region(separate taskflow) --> panelSplitter --> table At times the tab is not displayed with 100% width or the table in panelSplitter is not 100% visible or the splitter is not visible. Maintaining the stretch for all the components is difficult......not any more!!! Below is the solution that you can make use of in many similar scenarios. I am mentioning the major code snippets affecting the stretch and alignment. pop-up: <af:popup> <af:dialog id="d2" type="none" title="" inlineStyle="width:1200px"> <af:region value="#{bindings.PriceChangePopupFlow1.regionModel}" id="r1"/> </af:dialog> The above region is a jsff containing multiple tabs. I am showing code for a single tab. I kept the tab in a panelStretchLayout. <af:panelStretchLayout id="psl1" topHeight="300px" styleClass="AFStretchWidth"> <af:panelTabbed id="pt1"> <af:showDetailItem text="PO Details" id="sdi1" stretchChildren="first" > <af:region value="#{bindings.PriceChangePurchaseOrderFlow1.regionModel}" id="r1" binding="# {pageFlowScope.priceChangePopupBean.poDetailsRegion}" /> This "region" displays a .jsff containing a table in a panelSplitter. <af:panelSplitter id="ps1"  orientation="horizontal" splitterPosition="700"> <f:facet name="first"> <af:panelHeader text="PurchaseOrder" id="ph1"> <af:table id="md1" rows="#{bindings.PurchaseOrderVO.rangeSize}" That's it!!! We're done... Note the stretchChildren="first" attribute in the af:showDetailItem. That does the trick for us. Oracle docs say the following about stretchChildren :  Valid Values: none, first The stretching behavior for children. Acceptable values include: "none": does not attempt to stretch any children (the default value and the value you need to use if you have more than a single child; also the value you need to use if the child does not support being stretched) "first": stretches the first child (not to be used if you have multiple children as such usage will produce unreliable results; also not to be used if the child does not support being stretched)

    Read the article

< Previous Page | 238 239 240 241 242 243 244 245 246 247 248 249  | Next Page >