Search Results

Search found 10812 results on 433 pages for 'boot partition'.

Page 243/433 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

  • How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

    - by Usagi
    So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

    Read the article

  • xl create doesn't bring up console

    - by ineff
    I've tryed to run VM in Xen 4.2 using xl command (for what I get this should be standard toolstack, while xm is deprecated). In this case I've the following configuration file kernel = '/media/home_separata/domU_kernel/boot/vmlinuz-linux' ramdisk = '/media/home_separata/domU_kernel/boot/initramfs-linux.img' name = "domU_Arch_linux" memory = "512" root = '/dev/xvda1 ro' disk = ['file:/media/home_separata/domU_kernel/arch_linux_kernel.img,xvda1,w'] vif = ['mac=aa:::10:11:f1,ip=192.168.0.2,bridge=xenbr0'] when I try to start the virtual machine with xl create it seems it works (it also bring up the vif interfaces) but if I try to connect via xl console it gives an error: xenconsole: Could not read tty from store: No such file or directory the fun fact is that the I've the problem inverse using xend/xm (in that case xend doesn't bring up vif interfaces but activate console). Does anyone have any suggestion?

    Read the article

  • How do I disable startup dll and programs in vista?

    - by phoenixoflight
    Here is the situation. I can't get into Vista or boot into safe mode. I get blue screened either way during the loading process. I would like to try to disable as many dlls and programs from loading at boot as I can. What files in vista do I change to go about doing this? All the guides I've seen do it from within Vista. I have a BartPE bootable cd that I'm using to get into the file system. I just need to know which files to modify. Thanks much for reading

    Read the article

  • How do I disable startup dll and programs in vista?

    - by phoenixoflight
    Here is the situation. I can't get into Vista or boot into safe mode. I get blue screened either way during the loading process. I would like to try to disable as many dlls and programs from loading at boot as I can. What files in vista do I change to go about doing this? All the guides I've seen do it from within Vista. I have a BartPE bootable cd that I'm using to get into the file system. I just need to know which files to modify. Thanks much for reading

    Read the article

  • Why does booting from a 64 bit Win 8 USB install work on a 32 bit laptop?

    - by Arabella
    I upgraded a 64 bit Windows 7 laptop to Windows 8 through the Upgrade Assistant, creating a bootable USB without any problems. I installed it successfully. Before I purchased an upgrade for my 32 bit Windows 7 laptop, I decided to boot from the USB with the 64 bit ISO to see what happened. The Windows 8 install screen came up with all the options. Should it not have detected that the laptop is 32 bit and therefore the install should have given an error? I cancelled the install before it did anything, but now I want to know if I need to download the iso again after purchasing the upgrade on my 32 bit laptop? I've read the answers to this question, which confirms what is said in this article - a 32 or 64 bit iso will be downloaded depending on the hardware of the computer you are upgrading. If that is the case, then why did it boot into the install screen?

    Read the article

  • Easiest way to move my Windows installation to an SSD?

    - by Jon Artus
    I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device. I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?

    Read the article

  • Bootmgr is missing for windows xp

    - by user1167074
    I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

    Read the article

  • Recovering from backup without original install media

    - by KGendron
    A machine from my old job had a complete hard drive failure. I have backups but I'm running into severe problems restoring from them. The only install media was a secondary restore partition on the system's hard drive. I hate whoever came up with that idea more than i can possibly express with words. I spent several days trying to recover the disk - it is pretty well shot and none of my best tricks could even get it to show up in the bios/ The machine that broke is an hp with xp media center edition on it (I don't know why either). The backups were created using the default windows backup tool - I have .bfk file on an external hardrive that i am trying to restore from. I've replaced the hard drive. My home machine is running windows 7 64bit and i'm trying to use it as a platform to restore to the other disk. I downloaded the window 7 nt-restore utility, however no matter what i do it restores to my C drive rather than the specified drive. Fortunately win7 security settings prevented it from being a complete disaster - but still not a happy thing. I tried firing up the xp virtual machine. I can browse to the backups but it says they are invalid and refuse to let me view/ continue with the restore. I tried installing XP to an extra harddrive on my machine - however it bluescreens on me during the install process and I cry. I tried installing xp pro to the new drive and attempted to restore over it, it of course blackscreened on me as that was a stupid idea. I made two partitions on the new hard drive (Apparently the bios on this accursed piece of junk doesn't allow hd partitions larger than 200G anyways and thus fails 40 minutes into the install with an ever-descriptive "Disk Read Error". Guess how i spent last weekend? My last idea was to install xp pro to the second partition and then use it to restore from backup to the first. After the first restart it gives me the error "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware". My brain made one of those bad hard drive clicky noises. I've tried several boot disks but they don't seem to work. If anyone has a link to a good one it would be greatly appreciated. Anyone have any more ideas? - I really hate asking on what seems like such a simple issue but i am quite literally at my wit's end. Thanks - and sorry for the really long post.

    Read the article

  • A failed disk (Pay for professional service or SpinRite?)(new edit)

    - by huggie
    EDIT: After much negotiating and begging and seeing through promotion smoke screen, thanks to the nice representative who took my case, I now know that the engineer has already fixed my NTFS partition (I guess it might be a bad block in the partition table?). She told me that the problem was considered minor, and I should be able to boot normally and just copy stuff out. Whew..I'm glad I didn't agree to the NTD $16,000 deal. New question (should this be in a new thread?): is it safer to use the linux "dd" command or is it better to boot normally into Windows XP and just copy stuff out? EDIT2: Thanks to all the help. I give the best answer to Console as it's most directed related to my question. But many suggestion are helpful and informational. ---- ORIGINAL POST BELOW --- Hi, in my previous post (You don't need to read but it's at http://superuser.com/questions/48838/windows-xp-a-disk-read-error-occurred), I said that my hard disk was not booting and is showing "a disk read error occurred". I took it to a recovery professional. A representative responded today told me that the NTFS partitions have a "NTFS partition system crash". I have no idea what that means. The engineer handling my drive will not be available for contact till tomorrow. Now the company charges me NTD (New Taiwan Dollar) $16,000 to recover lost data, that's kind of a lot considering that my graduate student monthly stipend is currently NTD $32,000 (max. allowed by regulation, may be lower, may change depend on funding). Now I'm weighting in between the options. Option A: let the professional recovers it with the half of my monthly stipend. If file/directories I designated are not recovered I don't pay a penny. (other than the initial examination fee of NTD $1000 which I've already paid.) Option B: let me try SpinRite, if failed, back to Option A. I spoke to the representative at the company they recommended me not to handle it on my own (yeah of course that's what they all want to say, right?), and at the price tag the disk error is probably relatively minor and data recoverable. But the representative really did not have detailed information of the disk failure so I didn't take her recommendation readily. Though one thing I heed was that she said that what they would do is to duplicate the disk before attempting discovery, so there would be no data loss (Is this true? can't duplicating invoke further data loss?). That sounds very good to me. Or maybe a third option: Option C: Negotiate with them to pay them to duplicate the disk hopefully for a much smaller price tag. Let me try SpinRite, if failed, back to Option A. This is a difficult decision. Ultimately I want my data back, but if a cheaper way is available to achieve the same thing... Can operating with SpinRite also corrupt data in someway? I've no idea what happened to my drive. I'll attempt to contact the engineer and hope to get it clarified and make an edit here.

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • dhcp code for pxe server

    - by avoq
    I'm trying to understand every single line of the following script but to no avail. I'd be glad if someone could help me. For sure I know its purpose is to start the DHCP server as well as the TFTP...But I'm stuck: killall dnsmasq 2>/dev/null dnsmasq --enable-tftp --tftp-root=$PXEDATA/boot --dhcp-boot=pxelinux.0,"$IP",$IP --dhcp-range=$(echo $IP | cut -d. -f1-3).50,$(echo $IP | cut -d. -f1-3).250, infinite --dhcp-option=option:router,192.168.0.254 --log-dhcp Why killall, why dnsmasq 2 What does "2" stand for? "--" what does it mean? Thanks a lot.

    Read the article

  • Linux cannot see Windows 7 partitions on install

    - by Nash0
    I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem. I have also tried the Ubuntu "install in Windows" option and could not get it to work. EDIT: Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.

    Read the article

  • Volume expanded in Volume Group, old disk reduced but still in use in system

    - by Yurij73
    Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

    Read the article

  • VirtualBox: Grub sees hard drive, Linux does not

    - by thabubble
    I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

    Read the article

  • Raid 5 scsi fault

    - by HaLaBi
    I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

    Read the article

  • Change MacOS X guest screen resolution for VirtualBox

    - by Pymoo
    I have tried all alternatives and resources that I found on internet to achieve to change screen resolution in my MacOS X guest. I have the latest VirtualBox version (4.1.22) and I have MacOS X 10.6.3 Snow Leopard running in a vm guest. Some solutions that don't work for me are: Tuning virtual machine settings: Adding and in the .vbox file, or running these two commands: vboxmanage setextradata "MAC OS X" "CustomVideoMode1" "1360x768x32" vboxmanage setextradata "MAC OS X" "GUI/CustomVideoMode1" "1360x768x32" Editing Guest OS boot configuration: Modify /Library/Preferences/SystemConfiguration/com.apple.boot.plist with these lines: <key>Kernel Flags</key> <string>"Graphics Mode"="1360x768x32"</string> <key>Graphics Mode</key> <string>1360x768x32</string> Any other suggestion, something that I was missing. Thanks in advance,

    Read the article

  • Rebuilding RAID1 in Ubuntu

    - by John Utech
    I had my second HD in my RAID1 come up with bad sectors. So I got another drive and pulled out the bad sector drive and put the new drive in. With the original working RAID1 drive in the computer it failed to boot. I manually copied everything from the old drive over via a Gparted Live CD. Still no booting. Kind of scratching my head here as I can see that both of the drives have data on them but are unable to get either of them to boot. I used a Ubuntu live CD and couldn't even manually mount either of the drives, which I thought was really the odd part. Not sure where to go from here.

    Read the article

  • JBoss 4.2.3 Won't Start

    - by Thody
    Hi, I'm trying to start a new installation of JBoss 4.2.3, and it's getting as far as "INFO [Server] Core system initialized", then hanging for several minutes. There is a Java process running, but only at ~35%. Also, looking at the boot.log, there are no entries after ~1s after starting the boot. Any ideas what might be up? Update: After about 10 minutes, I got a handful of garbage collection warnings: GC Warning: Repeated allocation of very large block (appr. size 512000): May lead to memory leak and poor performance.

    Read the article

  • Windows 8 Installation Fails

    - by HackToHell
    I have the Windows 8 32-bit ISO which fails to install when booted from a USB flash drive. It copies the files, the boot loader installs, but the install hangs when I boot into Windows 8 for the first time--it simply keeps on spinning forever. The Windows 8 Release Preview does not work either. I did a VHD install of Windows 8 Developer Preview and it installed fine. Looking at the partition from Windows 7, I can see that the files are present. What could be the problem?

    Read the article

  • How to clone & restore virtual box hard drive

    - by user23950
    What I want to do is to clone my virtual box hdd with dual boot os. Xp and Vista. I'm using acronis and back it up on a flash drive. And end up with the flash drive that is partitioned. 2 partitions just like the virtual box hard disk. What do I do to restore it. I'm running acronis inside virtual box. What do I do to make use of the backup and actually restore what I've back up. And to be able to boot to xp and vista again inside virtual box. Please help.

    Read the article

  • Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

    - by rofrol
    Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

    Read the article

  • How to convert WinXP + Apps on RAID0 to use just one of the two RAID disks?

    - by chris5gd
    I have two 150GB SATA drives in hardware RAID 0, on which I have my C: (Win XP) and D: (installed apps). I'm migrating to Windows 7, but I want to keep my XP system until I've got it all running smoothly. So I want to: break the RAID move C: and D: to one of the drives (there's enough room) use the other drive for Win 7 boot into one or the other Clearly I can't move C: and D: after breaking the RAID, so I'm assuming I need to image the two partitions first, then break the RAID and restore the images to one of the drives. So my questions are: Is this possible? If so, what would be a good (free) imaging/restore tool? How do I ensure that the drive will boot after restoring the images? What sort of gotchas should I look out for? If there's a better solution than this, I'd be grateful for suggestions. Thanks!

    Read the article

  • Run a service after networking is ready on Ubuntu?

    - by TK Kocheran
    I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

    Read the article

  • Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

    - by xtian
    With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

    Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >