Search Results

Search found 7097 results on 284 pages for 'calls'.

Page 243/284 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• Script to UPDATE STATISTICS with time window

  - by Bill Graziano

  I recently spent some time troubleshooting odd query plans and came to the conclusion that we needed better statistics.  We’ve been running sp_updatestats but apparently it wasn’t sampling enough of the table to get us what we needed.  I have a pretty limited window at night where I can hammer the disks while this runs.  The script below just calls UPDATE STATITICS on all tables that “need” updating.  It defines need as any table whose statistics are older than the number of days you specify (30 by default).  It also has a throttle so it breaks out of the loop after a set amount of time (60 minutes).  That means it won’t start processing a new table after this time but it might take longer than this to finish what it’s doing.  It always processes the oldest statistics first so it will eventually get to all of them.  It defaults to sample 25% of the table.  I’m not sure that’s a good default but it works for now.  I’ve tested this in SQL Server 2005 and SQL Server 2008.  I liked the way Michelle parameterized her re-index script and I took the same approach. CREATE PROCEDURE dbo.UpdateStatistics ( @timeLimit smallint = 60 ,@debug bit = 0 ,@executeSQL bit = 1 ,@samplePercent tinyint = 25 ,@printSQL bit = 1 ,@minDays tinyint = 30 )AS/******************************************************************* Copyright Bill Graziano 2010*******************************************************************/SET NOCOUNT ON;PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Launching...'IF OBJECT_ID('tempdb..#status') IS NOT NULL DROP TABLE #status;CREATE TABLE #status( databaseID INT , databaseName NVARCHAR(128) , objectID INT , page_count INT , schemaName NVARCHAR(128) Null , objectName NVARCHAR(128) Null , lastUpdateDate DATETIME , scanDate DATETIME CONSTRAINT PK_status_tmp PRIMARY KEY CLUSTERED(databaseID, objectID));DECLARE @SQL NVARCHAR(MAX);DECLARE @dbName nvarchar(128);DECLARE @databaseID INT;DECLARE @objectID INT;DECLARE @schemaName NVARCHAR(128);DECLARE @objectName NVARCHAR(128);DECLARE @lastUpdateDate DATETIME;DECLARE @startTime DATETIME;SELECT @startTime = GETDATE();DECLARE cDB CURSORREAD_ONLYFOR select [name] from master.sys.databases where database_id > 4OPEN cDBFETCH NEXT FROM cDB INTO @dbNameWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN SELECT @SQL = ' use ' + QUOTENAME(@dbName) + ' select DB_ID() as databaseID , DB_NAME() as databaseName ,t.object_id ,sum(used_page_count) as page_count ,s.[name] as schemaName ,t.[name] AS objectName , COALESCE(d.stats_date, ''1900-01-01'') , GETDATE() as scanDate from sys.dm_db_partition_stats ps join sys.tables t on t.object_id = ps.object_id join sys.schemas s on s.schema_id = t.schema_id join ( SELECT object_id, MIN(stats_date) as stats_date FROM ( select object_id, stats_date(object_id, stats_id) as stats_date from sys.stats) as d GROUP BY object_id ) as d ON d.object_id = t.object_id where ps.row_count > 0 group by s.[name], t.[name], t.object_id, COALESCE(d.stats_date, ''1900-01-01'') ' SET ANSI_WARNINGS OFF; Insert #status EXEC ( @SQL); SET ANSI_WARNINGS ON; END FETCH NEXT FROM cDB INTO @dbNameENDCLOSE cDBDEALLOCATE cDBDECLARE cStats CURSORREAD_ONLYFOR SELECT databaseID , databaseName , objectID , schemaName , objectName , lastUpdateDate FROM #status WHERE DATEDIFF(dd, lastUpdateDate, GETDATE()) >= @minDays ORDER BY lastUpdateDate ASC, page_count desc, [objectName] ASC OPEN cStatsFETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateWHILE (@@fetch_status <> -1)BEGIN IF (@@fetch_status <> -2) BEGIN IF DATEDIFF(mi, @startTime, GETDATE()) > @timeLimit BEGIN PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + '*** Time Limit Reached ***'; GOTO __DONE; END SELECT @SQL = 'UPDATE STATISTICS ' + QUOTENAME(@dBName) + '.' + QUOTENAME(@schemaName) + '.' + QUOTENAME(@ObjectName) + ' WITH SAMPLE ' + CAST(@samplePercent AS NVARCHAR(100)) + ' PERCENT;'; IF @printSQL = 1 PRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + @SQL + ' (Last Updated: ' + CAST(@lastUpdateDate AS VARCHAR(100)) + ')' IF @executeSQL = 1 BEGIN EXEC (@SQL); END END FETCH NEXT FROM cStats INTO @databaseID, @dbName, @objectID, @schemaName, @objectName, @lastUpdateDateEND__DONE:CLOSE cStatsDEALLOCATE cStatsPRINT '[ ' + CAST(GETDATE() AS VARCHAR(100)) + ' ] ' + 'Completed.'GO

  Read the article

• AWS .NET SDK v2: setting up queues and topics

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/13/aws-.net-sdk-v2-setting-up-queues-and-topics.aspxFollowing on from my last post, reading from SQS queues with the new SDK is easy stuff, but linking a Simple Notification Service topic to an SQS queue is a bit more involved. The AWS model for topics and subscriptions is a bit more advanced than in Azure Service Bus. SNS lets you have subscribers on multiple different channels, so you can send a message which gets relayed to email address, mobile apps and SQS queues all in one go. As the topic owner, when you request a subscription on any channel, the owner needs to confirm they’re happy for you to send them messages. With email subscriptions, the user gets a confirmation request from Amazon which they need to reply to before they start getting messages. With SQS, you need to grant the topic permission to write to the queue. If you own both the topic and the queue, you can do it all in code with the .NET SDK. Let’s say you want to create a new topic, a new queue as a topic subscriber, and link the two together. Creating the topic is easy with the SNS client (which has an expanded name, AmazonSimpleNotificationServiceClient, compare to the SQS class which is just called QueueClient): var request = new CreateTopicRequest(); request.Name = TopicName; var response = _snsClient.CreateTopic(request); TopicArn = response.TopicArn; In the response from AWS (which I’m assuming is successful), you get an ARN – Amazon Resource Name – which is the unique identifier for the topic. We create the queue using the same code from my last post, AWS .NET SDK v2: the message-pump pattern, and then we need to subscribe the queue to the topic. The topic creates the subscription request: var response = _snsClient.Subscribe(new SubscribeRequest { TopicArn = TopicArn, Protocol = "sqs", Endpoint = _queueClient.QueueArn }); That response will give you an ARN for the subscription, which you’ll need if you want to set attributes like RawMessageDelivery. Then the SQS client needs to confirm the subscription by allowing the topic to send messages to it. The SDK doesn’t give you a nice mechanism for doing that, so I’ve extended my AWS wrapper with a method that encapsulates it: internal void AllowSnsToSendMessages(TopicClient topicClient) { var policy = Policies.AllowSendFormat.Replace("%QueueArn%", QueueArn).Replace("%TopicArn%", topicClient.TopicArn); var request = new SetQueueAttributesRequest(); request.Attributes.Add("Policy", policy); request.QueueUrl = QueueUrl; var response = _sqsClient.SetQueueAttributes(request); } That builds up a policy statement, which gets added to the queue as an attribute, and specifies that the topic is allowed to send messages to the queue. The statement itself is a JSON block which contains the ARN of the queue, the ARN of the topic, and an Allow effect for the sqs:SendMessage action: public const string AllowSendFormat= @"{ ""Statement"": [ { ""Sid"": ""MySQSPolicy001"", ""Effect"": ""Allow"", ""Principal"": { ""AWS"": ""*"" }, ""Action"": ""sqs:SendMessage"", ""Resource"": ""%QueueArn%"", ""Condition"": { ""ArnEquals"": { ""aws:SourceArn"": ""%TopicArn%"" } } } ] }"; There’s a new gist with an updated QueueClient and a new TopicClient here: Wrappers for the SQS and SNS clients in the AWS SDK for .NET v2. Both clients have an Ensure() method which creates the resource, so if you want to create a topic and a subscription you can use:  var topicClient = new TopicClient(“BigNews”, “ImListening”); And the topic client has a Subscribe() method, which calls into the message pump on the queue client: topicClient.Subscribe(x=>Log.Debug(x.Body)); var message = {}; //etc. topicClient.Publish(message); So you can isolate all the fiddly bits and use SQS and SNS with a similar interface to the Azure SDK.

  Read the article

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• HOWTO Turn off SPARC T4 or Intel AES-NI crypto acceleration.

  - by darrenm

  Since we released hardware crypto acceleration for SPARC T4 and Intel AES-NI support we have had a common question come up: 'How do I test without the hardware crypto acceleration?'. Initially this came up just for development use so developers can do unit testing on a machine that has hardware offload but still cover the code paths for a machine that doesn't (our integration and release testing would run on all supported types of hardware anyway).  I've also seen it asked in a customer context too so that we can show that there is a performance gain from the hardware crypto acceleration, (not just the fact that SPARC T4 much faster performing processor than T3) and measure what it is for their application. With SPARC T2/T3 we could easily disable the hardware crypto offload by running 'cryptoadm disable provider=n2cp/0'.  We can't do that with SPARC T4 or with Intel AES-NI because in both of those classes of processor the encryption doesn't require a device driver instead it is unprivileged user land callable instructions. Turns out there is away to do this by using features of the Solaris runtime loader (ld.so.1). First I need to expose a little bit of implementation detail about how the Solaris Cryptographic Framework is implemented in Solaris 11.  One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.  The alternate to this is having the application coded to call getisax() and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so, and the unfortunately misnamed due to historical reasons libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  For SPARC T4 that would be: export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" and for Intel systems with AES-NI support: export LD_HWCAP="-aes" This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  It also works for the Oracle DB and Java JCE.  However does not work for the default enabled OpenSSL "t4" or "aes-ni" engines (unfortunately) because they do explicit calls to getisax() themselves rather than using multiple ELF cap sections. However we can still use OpenSSL to demonstrate this by explicitly selecting "pkcs11" engine  using only a single process and thread.  $ openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 54170.81k 187416.00k 489725.70k 805445.63k 1018880.00k $ LD_HWCAP="-aes" openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 29376.37k 58328.13k 79031.55k 86738.26k 89191.77k We can clearly see the difference this makes in the case where AES offload to the SPARC T4 was disabled. The "t4" engine is faster than the pkcs11 one because there is less overhead (again on a SPARC T4-1 using only a single process/thread - using -multi you will get even bigger numbers). $ openssl speed -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 85526.61k 89298.84k 91970.30k 92662.78k 92842.67k Yet another cool feature of the Solaris linker/loader, thanks Rod and Ali. Note these above openssl speed output is not intended to show the actual performance of any particular benchmark just that there is a significant improvement from using hardware acceleration on SPARC T4. For cryptographic performance benchmarks see the http://blogs.oracle.com/BestPerf/ postings.

  Read the article

• Bug in Delphi XE RegularExpressions Unit

  - by Jan Goyvaerts

  Using the new RegularExpressions unit in Delphi XE, you can iterate over all the matches that a regex finds in a string like this: procedure TForm1.Button1Click(Sender: TObject); var RegEx: TRegEx; Match: TMatch; begin RegEx := TRegex.Create('\w+'); Match := RegEx.Match('One two three four'); while Match.Success do begin Memo1.Lines.Add(Match.Value); Match := Match.NextMatch; end end; Or you could save yourself two lines of code by using the static TRegEx.Match call: procedure TForm1.Button2Click(Sender: TObject); var Match: TMatch; begin Match := TRegEx.Match('One two three four', '\w+'); while Match.Success do begin Memo1.Lines.Add(Match.Value); Match := Match.NextMatch; end end; Unfortunately, due to a bug in the RegularExpressions unit, the static call doesn’t work. Depending on your exact code, you may get fewer matches or blank matches than you should, or your application may crash with an access violation. The RegularExpressions unit defines TRegEx and TMatch as records. That way you don’t have to explicitly create and destroy them. Internally, TRegEx uses TPerlRegEx to do the heavy lifting. TPerlRegEx is a class that needs to be created and destroyed like any other class. If you look at the TRegEx source code, you’ll notice that it uses an interface to destroy the TPerlRegEx instance when TRegEx goes out of scope. Interfaces are reference counted in Delphi, making them usable for automatic memory management. The bug is that TMatch and TGroupCollection also need the TPerlRegEx instance to do their work. TRegEx passes its TPerlRegEx instance to TMatch and TGroupCollection, but it does not pass the instance of the interface that is responsible for destroying TPerlRegEx. This is not a problem in our first code sample. TRegEx stays in scope until we’re done with TMatch. The interface is destroyed when Button1Click exits. In the second code sample, the static TRegEx.Match call creates a local variable of type TRegEx. This local variable goes out of scope when TRegEx.Match returns. Thus the reference count on the interface reaches zero and TPerlRegEx is destroyed when TRegEx.Match returns. When we call MatchAgain the TMatch record tries to use a TPerlRegEx instance that has already been destroyed. To fix this bug, delete or rename the two RegularExpressions.dcu files and copy RegularExpressions.pas into your source code folder. Make these changes to both the TMatch and TGroupCollection records in this unit: Declare FNotifier: IInterface; in the private section. Add the parameter ANotifier: IInterface; to the Create constructor. Assign FNotifier := ANotifier; in the constructor’s implementation. You also need to add the ANotifier: IInterface; parameter to the TMatchCollection.Create constructor. Now try to compile some code that uses the RegularExpressions unit. The compiler will flag all calls to TMatch.Create, TGroupCollection.Create and TMatchCollection.Create. Fix them by adding the ANotifier or FNotifier parameter, depending on whether ARegEx or FRegEx is being passed. With these fixes, the TPerlRegEx instance won’t be destroyed until the last TRegEx, TMatch, or TGroupCollection that uses it goes out of scope or is used with a different regular expression.

  Read the article

• Flow-Design Cheat Sheet &ndash; Part II, Translation

  - by Ralf Westphal

  In my previous post I summarized the notation for Flow-Design (FD) diagrams. Now is the time to show you how to translate those diagrams into code. Hopefully you feel how different this is from UML. UML leaves you alone with your sequence diagram or component diagram or activity diagram. They leave it to you how to translate your elaborate design into code. Or maybe UML thinks it´s so easy no further explanations are needed? I don´t know. I just know that, as soon as people stop designing with UML and start coding, things end up to be very different from the design. And that´s bad. That degrades graphical designs to just time waste on paper (or some designer). I even believe that´s the reason why most programmers view textual source code as the only and single source of truth. Design and code usually do not match. FD is trying to change that. It wants to make true design a first class method in every developers toolchest. For that the first prerequisite is to be able to easily translate any design into code. Mechanically, without thinking. Even a compiler could do it :-) (More of that in some other article.) Translating to Methods The first translation I want to show you is for small designs. When you start using FD you should translate your diagrams like this. Functional units become methods. That´s it. An input-pin becomes a method parameter, an output-pin becomes a return value: The above is a part. But a board can be translated likewise and calls the nested FUs in order: In any case be sure to keep the board method clear of any and all business logic. It should not contain any control structures like if, switch, or a loop. Boards do just one thing: calling nested functional units in proper sequence. What about multiple input-pins? Try to avoid them. Replace them with a join returning a tuple: What about multiple output-pins? Try to avoid them. Or return a tuple. Or use out-parameters: But as I said, this simple translation is for simple designs only. Splits and joins are easily done with method translation: All pretty straightforward, isn´t it. But what about wires, named pins, entry points, explicit dependencies? I suggest you don´t use this kind of translation when your designs need these features. Translating to methods is for small scale designs like you might do once you´re working on the implementation of a part of a larger design. Or maybe for a code kata you´re doing in your local coding dojo. Instead of doing TDD try doing FD and translate your design into methods. You´ll see that way it´s much easier to work collaboratively on designs, remember them more easily, keep them clean, and lessen the need for refactoring. Translating to Events [coming soon]

  Read the article

• Two Candidates + One Job = Two Different Outcomes

  - by david.talamelli

  Recruiters have always headhunted (sidenote: I do not like this word, in general I think the type of people who use the phrase “headhunting” are the ones who are trying to sound more important than what they likely are). Any serious Recruiter engages in direct recruiting activity, it is part and parcel of the business it is not something unique. With the uptake in Social Media the past 4-5 years, we have seen an increase in the number of Recruiters proactively reaching out to people about job opportunities. We have also seen this activity increase across all levels of hire, from help desk roles to C-Level Executives. While getting approached about a role can be a nice boost to a person’s ego, do not let it give you an inflated sense of entitlement. It is The way that people handle themselves during these calls and subsequent interviews will have a large impact on their potential to land that job. Last week I spoke to two very different candidates, both about the same position and both with very different outcomes. On paper, Candidate #1 looked fantastic; they ticked many of the boxes that we were looking for. The person is working at global IT company and working in a similar role as the one we were hiring for but not in as senior as the role we had. This role would have been the perfect step to getting involved in more complex work for the person. Candidate #2 had less polished IT experience, ticked some of the boxes we were looking for and on paper in comparison to Candidate #1 was not as close a fit as Candidate #1 was. It seemed like I was comparing apples and oranges. After speaking to both candidates it turns out I was comparing apples and oranges except the person better suited for our role was not the one I was expecting it would be. The first candidate on paper looked great – they had the experience we were looking for and appeared to be just right for the role, but after talking to them, they gave me the impression that they thought the world owed them. The impression I was left with was that they did not equate success with hard work, they seemed more interested in “what is in it for me”. Rather than having a proper conversation with me, I was often cut off and asked to hurry it up when explaining our business, what we are doing, etc... . This person seemed more interested in the job title and money than how rather than think about ways to make the role successful. Candidate #2 who had limited experience, made up for any perceived lack of experience and them some with a demonstrated motivation to succeed and do the things needed to make that happen. Candidate #2 made a great first impression, they did not seem afraid of hard work and demonstrated a “team player” attitude. In talking to them they kept me engaged, listened and asked thoughtful questions that made me think this is the type of person who creates their own luck and who would thrive in a place like Oracle. Skills, capabilities, experience and a good resume can certainly get your foot in the door, but the wrong attitude or approach to work can close those opportunities just as easily. On the other hand, hard work, effort and a genuine work ethic may help open those doors that would otherwise closed for you. A resume with all the credentials gets you in the front door but that is just the beginning of the process. It is not how we start the race that is important, it’s how things end that matter most.

  Read the article

• New R Interface to Oracle Data Mining Available for Download

  - by charlie.berger

    The R Interface to Oracle Data Mining ( R-ODM) allows R users to access the power of Oracle Data Mining's in-database functions using the familiar R syntax. R-ODM provides a powerful environment for prototyping data analysis and data mining methodologies. R-ODM is especially useful for: Quick prototyping of vertical or domain-based applications where the Oracle Database supports the application Scripting of "production" data mining methodologies Customizing graphics of ODM data mining results (examples: classification, regression, anomaly detection) The R-ODM interface allows R users to mine data using Oracle Data Mining from the R programming environment. It consists of a set of function wrappers written in source R language that pass data and parameters from the R environment to the Oracle RDBMS enterprise edition as standard user PL/SQL queries via an ODBC interface. The R-ODM interface code is a thin layer of logic and SQL that calls through an ODBC interface. R-ODM does not use or expose any Oracle product code as it is completely an external interface and not part of any Oracle product. R-ODM is similar to the example scripts (e.g., the PL/SQL demo code) that illustrates the use of Oracle Data Mining, for example, how to create Data Mining models, pass arguments, retrieve results etc. R-ODM is packaged as a standard R source package and is distributed freely as part of the R environment's Comprehensive R Archive Network (CRAN). For information about the R environment, R packages and CRAN, see www.r-project.org. R-ODM is particularly intended for data analysts and statisticians familiar with R but not necessarily familiar with the Oracle database environment or PL/SQL. It is a convenient environment to rapidly experiment and prototype Data Mining models and applications. Data Mining models prototyped in the R environment can easily be deployed in their final form in the database environment, just like any other standard Oracle Data Mining model. What is R? R is a system for statistical computation and graphics. It consists of a language plus a run-time environment with graphics, a debugger, access to certain system functions, and the ability to run programs stored in script files. The design of R has been heavily influenced by two existing languages: Becker, Chambers & Wilks' S and Sussman's Scheme. Whereas the resulting language is very similar in appearance to S, the underlying implementation and semantics are derived from Scheme. R was initially written by Ross Ihaka and Robert Gentleman at the Department of Statistics of the University of Auckland in Auckland, New Zealand. Since mid-1997 there has been a core group (the "R Core Team") who can modify the R source code archive. Besides this core group many R users have contributed application code as represented in the near 1,500 publicly-available packages in the CRAN archive (which has shown exponential growth since 2001; R News Volume 8/2, October 2008). Today the R community is a vibrant and growing group of dozens of thousands of users worldwide. It is free software distributed under a GNU-style copyleft, and an official part of the GNU project ("GNU S"). Resources: R website / CRAN R-ODM

  Read the article

• SQL SERVER – Solution – User Not Able to See Any User Created Object in Tables – Security and Permissions Issue

  - by pinaldave

  There is an old quote “A Picture is Worth a Thousand Words”. I believe this quote immensely. Quite often I get phone calls that something is not working if I can help. My reaction is in most of the cases, I need to know more, send me exact error or a screenshot. Until and unless I see the error or reproduce the scenario myself I prefer not to comment. Yesterday I got a similar phone call from an old friend, where he was not sure what is going on. Here is what he said. “When I try to connect to SQL Server, it lets me connect just fine as well let me open and explore the database. I noticed that I do not see any user created instances but when my colleague attempts to connect to the server, he is able to explore the database as well see all the user created tables and other objects. Can you help me fix it? “ My immediate reaction was he was facing security and permission issue. However, to make the same recommendation I suggested that he send me a screenshot of his own SSMS and his friend’s SSMS. After carefully looking at both the screenshots, I was very confident about the issue and we were able to resolve the issue. Let us reproduce the same scenario and many there is some learning for us. Issue: User not able to see user created objects First let us see the image of my friend’s SSMS screen. (Recreated on my machine) Now let us see my friend’s colleague SSMS screen. (Recreated on my machine) You can see that my friend could not see the user tables but his colleague was able to do the same for sure. Now I believed it was a permissions issue. Further to this I asked him to send me another image where I can see the various permissions of the user in the database. My friends screen My friends colleagues screen This indeed proved that my friend did not have access to the AdventureWorks database and because of the same he was not able to access the database. He did have public access which means he will have similar rights as guest access. However, their SQL Server had followed my earlier advise on having limited access for guest access, which means he was not able to see any user created objects. My next question was to validate what kind of access my friend’s colleague had. He replied that the colleague is the admin of the server. I suggested that if my friend was suppose to have admin access to the database, he should request of having admin access to his colleague. My friend promptly asked for the same to his colleague and on following screen he added him as an admin. You can do the same using following T-SQL script as well. USE [AdventureWorks2012] GO ALTER ROLE [db_owner] ADD MEMBER [testguest] GO Once my friend was admin he was able to access all the user objects just like he was expecting. Please note, this complete exercise was done on a development server. One should not play around with security on live or production server. Security is such an issue, which should be left with only senior administrator of the server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• PECL OCI8 2.0 Production Release Announcement

  - by cj

  The PHP OCI8 2.0.6 extension for Oracle Database is now "production" status. The source code is available on PECL. This can be used immediately to update your OCI8 extension in PHP 5.2 and later versions. The extension compiles with Oracle 10.2 or later client libraries. Oracle's standard cross-version database connectivity applies. OCI8 2.0 and PHP 5.5.5 RPMs for Oracle and Red Hat Linux are available from oss.oracle.com. Windows DLLs are available on PECL for PHP 5.3, PHP 5.4 and PHP 5.5. OCI8 2.0 source code will also be automatically included in the next major version of PHP. New Functionality Oracle Database 12c Implicit Result Set support. IRS's make it easy to pass query results back from stored PL/SQL procedures or anonymous PL/SQL blocks. Individual IRS statement resources, each corresponding to a single query, can be obtained with the new function oci_get_implicit_resultset(). These 'child' statement resources can be passed to any oci_fetch_* function. See Using PHP and Oracle Database 12c Implicit Result Sets and the PHP Manual: oci_get_implicit_resultset(). DTrace Dynamic Trace static probes. This well respected DTrace tracing framework is available on a number of platforms, including Oracle Linux. PHP OCI8 static user-space probes can be enabled with PHP's --enable-dtrace configuration option. See Using PHP DTrace on Oracle Linux. Documentation is also available in the PHP Manual OCI8 and DTrace Dynamic Tracing Improved Functionality Using oci_execute($s, OCI_NO_AUTO_COMMIT) for a SELECT no longer unnecessarily initiates an internal ROLLBACK during connection close. This can improve overall scalability by reducing "round trips" between PHP and the database. Changed Functionality PHP OCI8 2.0's minimum pre-requisites are now PHP 5.2 and Oracle client library 10.2. Later versions of both are usable and, in fact, recommended. Use the older PHP OCI8 1.4.10 extension when using PHP 4.3.9 through to PHP 5.1.x, or when only Oracle Database 9.2 client libraries are available. oci_set_*($connection, ...) meta data setting call error handling is fixed so that oci_error($connection) works for these calls. Note: The old, deprecated function aliases like ocilogon still exist but are not recommended for new applications. Phpinfo() Changes Some cosmetic changes were made to the output of php --ri oci8 and the phpinfo() function. The oci8.event and oci8.connection_class values are now shown only when the Oracle client libraries support the respective functionality. Connection statistics are now in a separate phpinfo() table. Temporary LOB and Collection support status lines in phpinfo() output were removed. These two features have always been enabled since 2007. Oci_internal_debug() Changes The oci_internal_debug() function is now a no-op. Use PHP's --enable-dtrace functionality with DTrace or SystemTap instead. References OCI8 Extension source code and Windows DLLs http://pecl.php.net/package/oci8 Oracle Linux RPMs oss.oracle.com PHP Manual for OCI8 OCI8 and DTrace Dynamic Tracing Oracle OpenWorld Conference paper What's New in Oracle Database 12c for PHP

  Read the article

• Authenticating your windows domain users in the cloud

  - by cibrax

  Moving to the cloud can represent a big challenge for many organizations when it comes to reusing existing infrastructure. For applications that drive existing business processes in the organization, reusing IT assets like active directory represent good part of that challenge. For example, a new web mobile application that sales representatives can use for interacting with an existing CRM system in the organization. In the case of Windows Azure, the Access Control Service (ACS) already provides some integration with ADFS through WS-Federation. That means any organization can create a new trust relationship between the STS running in the ACS and the STS running in ADFS. As the following image illustrates, the ADFS running in the organization should be somehow exposed out of network boundaries to talk to the ACS. This is usually accomplish through an ADFS proxy running in a DMZ. This is the official story for authenticating existing domain users with the ACS.  Getting an ADFS up and running in the organization, which talks to a proxy and also trust the ACS could represent a painful experience. It basically requires  advance knowledge of ADSF and exhaustive testing to get everything right.  However, if you want to get an infrastructure ready for authenticating your domain users in the cloud in a matter of minutes, you will probably want to take a look at the sample I wrote for talking to an existing Active Directory using a regular WCF service through the Service Bus Relay Binding. You can use the WCF ability for self hosting the authentication service within a any program running in the domain (a Windows service typically). The service will not require opening any port as it is opening an outbound connection to the cloud through the Relay Service. In addition, the service will be protected from being invoked by any unauthorized party with the ACS, which will act as a firewall between any client and the service. In that way, we can get a very safe solution up and running almost immediately. To make the solution even more convenient, I implemented an STS in the cloud that internally invokes the service running on premises for authenticating the users. Any existing web application in the cloud can just establish a trust relationship with this STS, and authenticate the users via WS-Federation passive profile with regular http calls, which makes this very attractive for web mobile for example. This is how the WCF service running on premises looks like, [ServiceBehavior(Namespace = "http://agilesight.com/active_directory/agent")] public class ProxyService : IAuthenticationService { IUserFinder userFinder; IUserAuthenticator userAuthenticator;   public ProxyService() : this(new UserFinder(), new UserAuthenticator()) { }   public ProxyService(IUserFinder userFinder, IUserAuthenticator userAuthenticator) { this.userFinder = userFinder; this.userAuthenticator = userAuthenticator; }   public AuthenticationResponse Authenticate(AuthenticationRequest request) { if (userAuthenticator.Authenticate(request.Username, request.Password)) { return new AuthenticationResponse { Result = true, Attributes = this.userFinder.GetAttributes(request.Username) }; }   return new AuthenticationResponse { Result = false }; } } Two external dependencies are used by this service for authenticating users (IUserAuthenticator) and for retrieving user attributes from the user’s directory (IUserFinder). The UserAuthenticator implementation is just a wrapper around the LogonUser Win Api. The UserFinder implementation relies on Directory Services in .NET for searching the user attributes in an existing directory service like Active Directory or the local user store. public UserAttribute[] GetAttributes(string username) { var attributes = new List<UserAttribute>();   var identity = UserPrincipal.FindByIdentity(new PrincipalContext(this.contextType, this.server, this.container), IdentityType.SamAccountName, username); if (identity != null) { var groups = identity.GetGroups(); foreach(var group in groups) { attributes.Add(new UserAttribute { Name = "Group", Value = group.Name }); } if(!string.IsNullOrEmpty(identity.DisplayName)) attributes.Add(new UserAttribute { Name = "DisplayName", Value = identity.DisplayName }); if(!string.IsNullOrEmpty(identity.EmailAddress)) attributes.Add(new UserAttribute { Name = "EmailAddress", Value = identity.EmailAddress }); }   return attributes.ToArray(); } As you can see, the code is simple and uses all the existing infrastructure in Azure to simplify a problem that looks very complex at first glance with ADFS. All the source code for this sample is available to download (or change) in this GitHub repository, https://github.com/AgileSight/ActiveDirectoryForCloud

  Read the article

• Managing game state / 'what to update' within an XNA game 'screen'

  - by codinghands

  Note - having read through other GDev questions suggested when writing this question I'm confident this isn't a dupe. Of course, it's 3am and I'm likely wrong, so please mod as such if so. I'm trying to figure out how best to manage state within my game screens - please bare with me though! At the moment I'm using a heavily modified version of the fantastic game state management example on the XNA site available here. This is working perfectly for my 'Screens' - 'IntroScreen' with some shiny logos, 'TitleScreen' and a 'MenuScreen' stacked on top for the title and menu, 'PlayScreen' for the actual gameplay, etc. Each screen has the a bunch of sprites, and an 'Update' and 'Draw', managed by a 'ScreenManager'. In addition to the above, and as suggested as an answer to my other question here, most screens have a 'GameProcessQueue' class full of 'GameProcess'es which lets me do just about anything (animations, youbetcha!), in any order, in sequence or parallel. Why mention all this? When I talk about managing game state I'm thinking more for complex scenarios within a 'Screen'. 'TitleScreen', 'MenuScreen' and the like are all relatively simple. 'Play Screen' less so. How do people manage the different 'states' within the screen (or whatever you call it) that 'does' gameplay? (for me, the 'PlayScreen') I've thought about the following: Enum of different states in the Screen, 'activeState' enum-type variable, switching on the enum in the Screen Update() loop to determine what Screen Update 'sub'-function is called. I can see this getting hairy pretty fast though as screens get more complex and with the 'PlayScreen' becoming a behemoth mega-class. 'State' class with Update loop - a Screen can have any number of 'States', 1+ of which are 'active'. Screen update loop calls update on all active states. States themselves know which screen they belong to, and may even belong to a 'StateManager' which handles transitioning from one state to the next. Once a state is over it's removed from the ScreenState list. The Screen doesn't need a bunch of GameProcessQueues, each State has its own. Abstract Screen further to be more flexible - I can see the similarities between what I've got (game 'Screens' handled by a ScreenManager) and what I want (states within a screen, and a mechanism to manage them). However at the moment I see 'Screens' as high level and very distinct ('PlayScreen' with baddies != 'MenuScreen' with 4 words and event handlers), where as my proposed 'States' are more intrinsically tied to a specific screen with complex requirements. I think. This is for a turn-based board game, so it's easier to define things as a discrete series of steps (IntroAnimation - P1Turn - P2Turn - P1Turn ... - GameOver - .... Obviously with an open-world RPG things are very different, but any advice in this scenario is appreciated. If I'm just going OOP-crazy please say so. Similarly I'm concious there's a huge amount on this site re: state management. But as my first 'serious' game after a couple of false starts I'd like to get this right, and would rather be harassed and modded down than never ask :)

  Read the article

• GLSL Shader Texture Performance

  - by Austin

  I currently have a project that renders OpenGL video using a vertex and fragment shader. The shaders work fine as-is, but in trying to add in texturing, I am running into performance issues and can't figure out why. Before adding texturing, my program ran just fine and loaded my CPU between 0%-4%. When adding texturing (specifically textures AND color -- noted by comment below), my CPU is 100% loaded. The only code I have added is the relevant texturing code to the shader, and the "glBindTexture()" calls to the rendering code. Here are my shaders and relevant rending code. Vertex Shader: #version 150 uniform mat4 mvMatrix; uniform mat4 mvpMatrix; uniform mat3 normalMatrix; uniform vec4 lightPosition; uniform float diffuseValue; layout(location = 0) in vec3 vertex; layout(location = 1) in vec3 color; layout(location = 2) in vec3 normal; layout(location = 3) in vec2 texCoord; smooth out VertData { vec3 color; vec3 normal; vec3 toLight; float diffuseValue; vec2 texCoord; } VertOut; void main(void) { gl_Position = mvpMatrix * vec4(vertex, 1.0); VertOut.normal = normalize(normalMatrix * normal); VertOut.toLight = normalize(vec3(mvMatrix * lightPosition - gl_Position)); VertOut.color = color; VertOut.diffuseValue = diffuseValue; VertOut.texCoord = texCoord; } Fragment Shader: #version 150 smooth in VertData { vec3 color; vec3 normal; vec3 toLight; float diffuseValue; vec2 texCoord; } VertIn; uniform sampler2D tex; layout(location = 0) out vec3 colorOut; void main(void) { float diffuseComp = max( dot(normalize(VertIn.normal), normalize(VertIn.toLight)) ), 0.0); vec4 color = texture2D(tex, VertIn.texCoord); colorOut = color.rgb * diffuseComp * VertIn.diffuseValue + color.rgb * (1 - VertIn.diffuseValue); // FOLLOWING LINE CAUSES PERFORMANCE ISSUES colorOut *= VertIn.color; } Relevant Rendering Code: // 3 textures have been successfully pre-loaded, and can be used // texture[0] is a 1x1 white texture to effectively turn off texturing glUseProgram(program); // Draw squares glBindTexture(GL_TEXTURE_2D, texture[1]); // Set attributes, uniforms, etc glDrawArrays(GL_QUADS, 0, 6*4); // Draw triangles glBindTexture(GL_TEXTURE_2D, texture[0]); // Set attributes, uniforms, etc glDrawArrays(GL_TRIANGLES, 0, 3*4); // Draw reference planes glBindTexture(GL_TEXTURE_2D, texture[0]); // Set attributes, uniforms, etc glDrawArrays(GL_LINES, 0, 4*81*2); // Draw terrain glBindTexture(GL_TEXTURE_2D, texture[2]); // Set attributes, uniforms, etc glDrawArrays(GL_TRIANGLES, 0, 501*501*6); // Release glBindTexture(GL_TEXTURE_2D, 0); glUseProgram(0); Any help is greatly appreciated!

  Read the article

• Gartner PCC: A Shovel & Some Ah-Ha's

  - by kellsey.ruppel

  When Gartner Vice President and leading analyst Whit Andrews kicked off the Gartner Portals, Content & Collaboration Summit on Monday, March 12 at the Gaylord Palms in Orlando, FL by bringing a shovel to the stage, eyebrows raised and a few thoughts went through my head. Either this guy plans to go help the construction workers outside construct that new pool at the Gaylord or he took a wrong turn and is at the wrong conference. Oh and how did he get that shovel through airport security? As Whit explained more his objective became more clear…take everything anyone has ever told you about portals and throw it out the window, as portals have evolved and times they are most certainly changing. The future Web is here, available not only on browsers but also via a broad spectrum of access points, including automobiles, consumer electronics and more and more mobile devices. Not merely prevalent, the future Web is also multimedia-driven and operates in real time, driven by mobility, social media, streaming video and other dynamic services. Applications and user experiences are in the midst of an evolution — from the early, simple mobile Web models to today’s Web 2.0 mobile apps and, ultimately, to a world of predominantly Web apps. Additionally, cloud services will forever change how portals and user experience are designed, built, delivered, sourced and managed. So what does this mean for you? Today’s organizations need software that will enable them to not just do their jobs, but to do it in a way that is familiar and easy for them.  What does this mean for IT? Use software and technology as an enabler, not as a roadblock. Overall, we had a great week in Orlando learning about how to improve the user experience, manage content explosion, launch social initiatives, transition to mobile environments and understand cloud and SaaS options.  We had some great conversations throughout the conference and at the Oracle booth. Lots of demonstrations were given of Oracle WebCenter Sites and Oracle Social Network. And as Christie mentioned earlier this week, our Vice President of Product Management and Strategy for WebCenter Loren Weinberg presented on the topic of customer engagement and talked about how organization’s relationships with their customers have fundamentally changed today and the resulting impact that has on their priorities.  Loren also talked about the importance of customer engagement, why that matters now more than ever, and what you can do to help your company or organization succeed in this new world. The question asked in every keynote and session was a simple one: What is your “ah-ha” moment? I personally had quite a few, some of which I’ve captured below. 70% of internal social initiatives eventually fail. By 2014, refusing to communicate with consumers via social media will be as harmful as ignoring emails/phone calls is today. Customer engagement = multi-channel + social & interactive + personal & relevant + optimized. If people choose to talk about your product/company/service, it's because it's remarkable. -- Seth Godin's keynote (one of the highlights of the conference!) The Web will become the primary method used for delivering content and applications to mobile devices. By 2015, 20% of smart phone users worldwide will conduct commerce using context-enriched services on a weekly basis.  86% of customers will pay more for a better customer experience. 6 P's of Quality User Experience. Product. Enabled by: People, Patterns, Process, Profit, Priorities. Did you attend the Gartner Summit? What were your ah-ha moments?

  Read the article

• Running a WebLogic Portal (WLP) 10.3.4 Domain as a Windows Service

  - by user647124

  To start a WLP server as a Windows service it is simplest to make your own script based on the provided standard script located at WL_HOME\server\bin\installSvc.cmd. The standard script works fine for a plain WLS domain, but lacks some classpath and options necessary for WLP.Start by making a copy of the installSvc.cmd script and naming it something specific to your domain.Next, just under SETLOCAL you will find where WL_HOME is defined. Here you will add the definitions you would normally add in a script that later calls installSvc.cmd (as per the standard documentation). set DOMAIN_NAME=gnma_test_domainset USERDOMAIN_HOME=D:\my_test_domainset SERVER_NAME=AdminServerset WLS_USER=weblogicset WLS_PW=gnmaAdmin01set PRODUCTION_MODE=trueset MEM_ARGS=-Xms512m –Xmx512mset MW_HOME=C:\Oracle\Middleware Note: I had heard of people using this approach who had issues with the length of the command line. This may be due to their use of the default domain path. In the example above, I use a shorter path.At this point, edit the DOMAIN_HOME\bin\startWebLogic.cmd and set it to echo both the classpath and the options. Then start the domain and capture the output of those echoes, then shut the domain back down. Now REM out the existing CLASSPATH definition, then use the outputs you captured earlier to set the CLASSPATH and JAVA_OPTIONS like this: REM set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%; C:\Oracle\Middleware\wlportal_10.3\portal\lib\security\wsrp-security-providers.jarset CLASSPATH=%MW_HOME%\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_wlp1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_oepe1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_ocm1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\JROCKI~1.1-3\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%MW_HOME%\modules\features\weblogic.server.modules_10.3.4.0.jar;%WL_HOME%\server\lib\webservices.jar;%MW_HOME%\modules\ORGAPA~1.1/lib/ant-all.jar;%MW_HOME%\modules\NETSFA~1.0_1/lib/ant-contrib.jar;%WL_HOME%\common\derby\lib\derbyclient.jar;%WL_HOME%\server\lib\xqrl.jar;%WL_HOME%\server\lib\xquery.jar;%WL_HOME%\server\lib\binxml.jarset JAVA_OPTIONS= -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=%WL_HOME% -Dwls.home=%WL_HOME%\server -Dweblogic.home=%WL_HOME%\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=%MW_HOME%\patch_wls1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_wlp1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_oepe1111\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_ocm1033\profiles\default\sysext_manifest_classpath;%MW_HOME%\wlportal_10.3\p13n\lib\system;%MW_HOME%\wlportal_10.3\light-portal\lib\system;%MW_HOME%\wlportal_10.3\portal\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\lib\system;%MW_HOME%\wlportal_10.3\analytics\lib\system;%MW_HOME%\wlportal_10.3\apps\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\deprecated\lib\system;%MW_HOME%\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=%MW_HOME%\wlportal_10.3\portal\lib\securityAnd that's it. Looks really simple, but it took me quite some time to gather all the necessary pieces in order to make it work. Hopefully you find this before you went through half as much research.The example here uses a domain with only the Admin server and no managed servers. For a variety of reasons I only want the Admin server to be run as a service. The standard documentation along with the example above should allow you to expand this to include managed servers should you feel the need.

  Read the article

• Ti Launchpad

  - by raysmithequip

  Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

  Read the article

• Why is there no service-oriented language?

  - by Wolfgang

  Edit: To avoid further confusion: I am not talking about web services and such. I am talking about structuring applications internally, it's not about how computers communicate. It's about programming languages, compilers and how the imperative programming paradigm is extended. Original: In the imperative programming field, we saw two paradigms in the past 20 years (or more): object-oriented (OO), and service-oriented (SO) aka. component-based (CB). Both paradigms extend the imperative programming paradigm by introducing their own notion of modules. OO calls them objects (and classes) and lets them encapsulates both data (fields) and procedures (methods) together. SO, in contrast, separates data (records, beans, ...) from code (components, services). However, only OO has programming languages which natively support its paradigm: Smalltalk, C++, Java and all other JVM-compatibles, C# and all other .NET-compatibles, Python etc. SO has no such native language. It only comes into existence on top of procedural languages or OO languages: COM/DCOM (binary, C, C++), CORBA, EJB, Spring, Guice (all Java), ... These SO frameworks clearly suffer from the missing native language support of their concepts. They start using OO classes to represent services and records. This leads to designs where there is a clear distinction between classes that have methods only (services) and those that have fields only (records). Inheritance between services or records is then simulated by inheritance of classes. Technically, its not kept so strictly but in general programmers are adviced to make classes to play only one of the two roles. They use additional, external languages to represent the missing parts: IDL's, XML configurations, Annotations in Java code, or even embedded DSL like in Guice. This is especially needed, but not limited to, since the composition of services is not part of the service code itself. In OO, objects create other objects so there is no need for such facilities but for SO there is because services don't instantiate or configure other services. They establish an inner-platform effect on top of OO (early EJB, CORBA) where the programmer has to write all the code that is needed to "drive" SO. Classes represent only a part of the nature of a service and lots of classes have to be written to form a service together. All that boiler plate is necessary because there is no SO compiler which would do it for the programmer. This is just like some people did it in C for OO when there was no C++. You just pass the record which holds the data of the object as a first parameter to the procedure which is the method. In a OO language this parameter is implicit and the compiler produces all the code that we need for virtual functions etc. For SO, this is clearly missing. Especially the newer frameworks extensively use AOP or introspection to add the missing parts to a OO language. This doesn't bring the necessary language expressiveness but avoids the boiler platform code described in the previous point. Some frameworks use code generation to produce the boiler plate code. Configuration files in XML or annotations in OO code is the source of information for this. Not all of the phenomena that I mentioned above can be attributed to SO but I hope it clearly shows that there is a need for a SO language. Since this paradigm is so popular: why isn't there one? Or maybe there are some academic ones but at least the industry doesn't use one.

  Read the article

• History of Mobile Technology

  - by David Dorf

  Over the last ten years, mobile phones have gone through several incremental technology leaps that have added capabilities that impact the retail industry.  I've listed the six major ones below, along with their long-lasting impact. 1. Location In the US, the FCC required mobile phones to implement E911 (emergency calls) by 2006, requiring the caller to be located to within 300 meters.  Back in 2000, GPS was opened up for civilian use, and by 2004 Qualcomm had figured out how to use GPS in mobile phones.  So mobile operators moved from cell tower triangulation to GPS, principally for E911.  But then lots of other uses became apparent, especially navigation.  The earliest mobile apps from retailers made it easy to find nearby stores, and companies are looking at ways to use WiFi triangulation inside stores. 2. Computer Vision In 1997 Philippe Kahn shared a photo of his newborn using a mobile phone thus launching the popularity of instant visual communications.  Over the years the quality of the cameras got better, reaching the point where barcodes could be read around 2008.  That's when Occipital came on the scene with their Red Laser application, which was eventually acquired by eBay.  This opened up the ability for consumers to easily price compare inside stores.  Other interesting apps included Tesco's Wine Finder and Amazon's Price Checker, both allowing products to be identified by picture. 3. Augmented Reality Once the mobile phone had GPS, a video camera, and compass functionality it was suddenly possible to overlay digital information on the screen in real-time.  Yelp, which was using GPS to find nearby merchants, created a backdoor called Monocle on the iPhone that showed nearby merchants overlayed on the video camera view.  Today AR apps are mostly used by retailers for marketing, like Moosejaw's app that undresses models in their catalog. 4. Geo-Fencing So if we're able to track the location of a mobile phone, why not use that context to offer timely information?  My first experience with geo-fencing came courtesy of North Face, the outdoor enthusiast store. When a mobile phone enters a predetermined area, like near a store, a text message is sent to phone with an offer or useful information.  Of course retailers can geo-fence their competitors as well and find out which customers are aren't so loyal. 5. Digital Wallet Mobile payments leverage different technologies such as NFC, QRCodes, bluetooth, and SMS to facilitate communication between the consumers's phone and the retailer's point-of-sale. The key here is the potential to consolidate loyalty cards, coupons, and bank cards into the mobile phone and enable faster checkout.  Nobody does this better than Starbucks today, but McDonald's and Duncan Donuts aren't far behind.  Google, Isis, Paypal, Square, and MCX are all vying for leadership in this area.  If NFC does finally take off, it will be leveraged by retailers in more places than just the POS. 6. Voice Response Mobile Phones have had the ability to interpret simple voice commands for a while, but Google and Amazon were the first to use voice to allow searches for products.  Allowing searches by text, barcode, and voice makes it easy to comparison shop in the aisles.  Walmart even uses voice to build shopping lists, and if the Siri API is even opened we could see lots more innovation in this area.

  Read the article

• Improving Click and Drag with C++

  - by Josh

  I'm currently using SFML 2.0 to develop a game in C++. I have a game sprite class that has a click and drag method. The method works, but there is a slight problem. If the mouse moves too fast, the object the user selected can't keep up and is left behind in the spot where the mouse left its bounds. I will share the class definition and the given function implementation. Definition: class codePeg { protected: FloatRect bounds; CircleShape circle; int xPos, yPos, xDiff, yDiff, once; int xBase, yBase; Vector2i mousePos; Vector2f circlePos; public: void init(RenderWindow& Window); void draw(RenderWindow& Window); void drag(RenderWindow& Window); void setPegPosition(int x, int y); void setPegColor(Color pegColor); void mouseOver(RenderWindow& Window); friend int isPegSelected(void); }; Implementation of the "drag" function: void codePeg::drag(RenderWindow& Window) { mousePos = Mouse::getPosition(Window); circlePos = circle.getPosition(); if(Mouse::isButtonPressed(Mouse::Left)) { if(mousePos.x > xPos && mousePos.y > yPos && mousePos.x - bounds.width < xPos && mousePos.y - bounds.height < yPos) { if(once) { xDiff = mousePos.x - circlePos.x; yDiff = mousePos.y - circlePos.y; once = 0; } xPos = mousePos.x - xDiff; yPos = mousePos.y - yDiff; circle.setPosition(xPos, yPos); } } else { once = 1; xPos = xBase; yPos = yBase; xDiff = 0; yDiff = 0; circle.setPosition(xBase, yBase); } Window.draw(circle); } Like I said, the function works, but to me, the code is very ugly and I think it could be improved and could be more efficient. The only thing I can think of as to why the object cannot keep up with the mouse is that there are too many function calls and/or checks. The user does not really have to mouse the mouse "fast" for it to happen, I would say at an average pace the object is left behind. How can I improve the code so that the object remains with the mouse when it is selected? Any help improving this code or giving advice is greatly appreciated.

  Read the article

• Game Object Factory: Fixing Memory Leaks

  - by Bunkai.Satori

  Dear all, this is going to be tough: I have created a game object factory that generates objects of my wish. However, I get memory leaks which I can not fix. Memory leaks are generated by return new Object(); in the bottom part of the code sample. static BaseObject * CreateObjectFunc() { return new Object(); } How and where to delete the pointers? I wrote bool ReleaseClassType(). Despite the factory works well, ReleaseClassType() does not fix memory leaks. bool ReleaseClassTypes() { unsigned int nRecordCount = vFactories.size(); for (unsigned int nLoop = 0; nLoop < nRecordCount; nLoop++ ) { // if the object exists in the container and is valid, then render it if( vFactories[nLoop] != NULL) delete vFactories[nLoop](); } return true; } Before taking a look at the code below, let me help you in that my CGameObjectFactory creates pointers to functions creating particular object type. The pointers are stored within vFactories vector container. I have chosen this way because I parse an object map file. I have object type IDs (integer values) which I need to translate them into real objects. Because I have over 100 different object data types, I wished to avoid continuously traversing very long Switch() statement. Therefore, to create an object, I call vFactoriesnEnumObjectTypeID via CGameObjectFactory::create() to call stored function that generates desired object. The position of the appropriate function in the vFactories is identical to the nObjectTypeID, so I can use indexing to access the function. So the question remains, how to proceed with garbage collection and avoid reported memory leaks? #ifndef GAMEOBJECTFACTORY_H_UNIPIXELS #define GAMEOBJECTFACTORY_H_UNIPIXELS //#include "MemoryManager.h" #include <vector> template <typename BaseObject> class CGameObjectFactory { public: // cleanup and release registered object data types bool ReleaseClassTypes() { unsigned int nRecordCount = vFactories.size(); for (unsigned int nLoop = 0; nLoop < nRecordCount; nLoop++ ) { // if the object exists in the container and is valid, then render it if( vFactories[nLoop] != NULL) delete vFactories[nLoop](); } return true; } // register new object data type template <typename Object> bool RegisterClassType(unsigned int nObjectIDParam ) { if(vFactories.size() < nObjectIDParam) vFactories.resize(nObjectIDParam); vFactories[nObjectIDParam] = &CreateObjectFunc<Object>; return true; } // create new object by calling the pointer to the appropriate type function BaseObject* create(unsigned int nObjectIDParam) const { return vFactories[nObjectIDParam](); } // resize the vector array containing pointers to function calls bool resize(unsigned int nSizeParam) { vFactories.resize(nSizeParam); return true; } private: //DECLARE_HEAP; template <typename Object> static BaseObject * CreateObjectFunc() { return new Object(); } typedef BaseObject*(*factory)(); std::vector<factory> vFactories; }; //DEFINE_HEAP_T(CGameObjectFactory, "Game Object Factory"); #endif // GAMEOBJECTFACTORY_H_UNIPIXELS

  Read the article

• How to translate along Z axis in OpenTK

  - by JeremyJAlpha

  I am playing around with an OpenGL sample application I downloaded for Xamarin-Android. The sample application produces a rotating colored cube I would simply like to edit it so that the rotating cube is translated along the Z axis and disappears into the distance. I modified the code by: adding an cumulative variable to store my Z distance, adding GL.Enable(All.DepthBufferBit) - unsure if I put it in the right place, adding GL.Translate(0.0f, 0.0f, Depth) - before the rotate functions, Result: cube rotates a couple of times then disappears, it seems to be getting clipped out of the frustum. So my question is what is the correct way to use and initialize the Z buffer and get the cube to travel along the Z axis? I am sure I am missing some function calls but am unsure of what they are and where to put them. I apologise in advance as this is very basic stuff but am still learning :P, I would appreciate it if anyone could show me the best way to get the cube to still rotate but to also move along the Z axis. I have commented all my modifications in the code: // This gets called when the drawing surface is ready protected override void OnLoad (EventArgs e) { // this call is optional, and meant to raise delegates // in case any are registered base.OnLoad (e); // UpdateFrame and RenderFrame are called // by the render loop. This is takes effect // when we use 'Run ()', like below UpdateFrame += delegate (object sender, FrameEventArgs args) { // Rotate at a constant speed for (int i = 0; i < 3; i ++) rot [i] += (float) (rateOfRotationPS [i] * args.Time); }; RenderFrame += delegate { RenderCube (); }; GL.Enable(All.DepthBufferBit); //Added by Noob GL.Enable(All.CullFace); GL.ShadeModel(All.Smooth); GL.Hint(All.PerspectiveCorrectionHint, All.Nicest); // Run the render loop Run (30); } void RenderCube () { GL.Viewport(0, 0, viewportWidth, viewportHeight); GL.MatrixMode (All.Projection); GL.LoadIdentity (); if ( viewportWidth > viewportHeight ) { GL.Ortho(-1.5f, 1.5f, 1.0f, -1.0f, -1.0f, 1.0f); } else { GL.Ortho(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f); } GL.MatrixMode (All.Modelview); GL.LoadIdentity (); Depth -= 0.02f; //Added by Noob GL.Translate(0.0f,0.0f,Depth); //Added by Noob GL.Rotate (rot[0], 1.0f, 0.0f, 0.0f); GL.Rotate (rot[1], 0.0f, 1.0f, 0.0f); GL.Rotate (rot[2], 0.0f, 1.0f, 0.0f); GL.ClearColor (0, 0, 0, 1.0f); GL.Clear (ClearBufferMask.ColorBufferBit); GL.VertexPointer(3, All.Float, 0, cube); GL.EnableClientState (All.VertexArray); GL.ColorPointer (4, All.Float, 0, cubeColors); GL.EnableClientState (All.ColorArray); GL.DrawElements(All.Triangles, 36, All.UnsignedByte, triangles); SwapBuffers (); }

  Read the article

• A more elegant way of embedding a SOAP security header in Silverlight 4

  - by Your DisplayName here!

  The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

  Read the article

• Webcast Q&A: ResCare Solves Content Lifecycle Challenges with Oracle WebCenter

  - by Kellsey Ruppel

  Last week we had the fourth webcast in our WebCenter in Action webcast series, "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter", where customer Joe Lichtefeld from ResCare and Wayne Boerger & Doug Thompson from Oracle Partner TEAM Informatics shared how Oracle WebCenter is powering allowing ResCare to solve content lifecycle challenges, reduce compliance and business risks, and increase adoption of intranet as primary business communication tool In case you missed it, here's a recap of the Q&A.   Joe Lichtefeld, ResCare  Q: Did you run into any issues in the deployment of the platform?A: We experienced very few issues when implementing the content management and search functionalities. There were some challenges in determining the metadata structure. We tried to find a fine balance between having enough fields to provide the functionality needed, but trying to limit the impact to the contributing members.  Q: What has been the biggest benefit your end users have seen?A: The biggest benefit to date is two-fold. Content on the intranet can be maintained by the individual contributors more timely than in our old process of all requests being updated by IT. The other big benefit is the ability to find the most current version of a document instead of relying on emails and phone calls to track down the "current" version. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: We experienced very little resistance. Most of our community groups were eager to be able to contribute and maintain their information. We had the normal hurdles of training and follow-up training with implementing a new system and process. As our second phase rolled out access to all employees, we have received more positive feedback on the accessibility of information. Wayne Boerger & Doug Thompson, TEAM Informatics Q: Can you integrate multiple repositories with the Google Search Appliance? Yes, the Google Search Appliance is designed to index lots of different repositories, from both public and internal sources. There are included connectors to many repositories, such as SharePoint, databases, file systems, LDAP, and with the TEAM GSA Connector and the Oracle Content Server. And the index for these repositories can be configured into different collections depending on the use cases that each customer has, and really, for each need within a customer environment. Q: How many different filters can you add when the search results are returned? A: Presuming this question is about the filtering on the search results. You can add as many filters as you like and it can be done by collection or any number of other criteria. Most importantly, customers now have the ability to limit the returned content by a set metadata value. Q: With the TEAM Sites Connector, what types of content can you sync? A: There’s really no limit; if it can be checked into the content server, then it is eligible for sync into Sites.  So basically, any digital file that has relevance to a Sites implementation can be checked into the WC Content central repository and then the connector can/will manage it. Q: Using the Connector, are there any limitations around where in Sites that synced content can be used? A: There are no limitations about where it can be used. When setting up your environment to use it, you just need to think through the different destinations on the Sites side that might use the content; that way you’ve got the right information to create the rules needed for the connector. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter from Oracle WebCenter

  Read the article

• PowerShell Script To Find Where SharePoint 2010 Features Are Activated

  - by Brian Jackett

  The script on this post will find where features are activated within your SharePoint 2010 farm.   Problem    Over the past few months I’ve gotten literally dozens of emails, blog comments, or personal requests from people asking “how do I find where a SharePoint feature has been activated?”  I wrote a script to find which features are installed on your farm almost 3 years ago.  There is also the Get-SPFeature PowerShell commandlet in SharePoint 2010.  The problem is that these only tell you if a feature is installed not where they have been activated.  This is especially important to know if you have multiple web applications, site collections, and /or sites.   Solution    The default call (no parameters) for Get-SPFeature will return all features in the farm.  Many of the parameter sets accept filters for specific scopes such as web application, site collection, and site.  If those are supplied then only the enabled / activated features are returned for that filtered scope.  Taking the concept of recursively traversing a SharePoint farm and merging that with calls to Get-SPFeature at all levels of the farm you can find out what features are activated at that level.  Store the results into a variable and you end up with all features that are activated at every level.    Below is the script I came up with (slight edits for posting on blog).  With no parameters the function lists all features activated at all scopes.  If you provide an Identity parameter you will find where a specific feature is activated.  Note that the display name for a feature you see in the SharePoint UI rarely matches the “internal” display name.  I would recommend using the feature id instead.  You can download a full copy of the script by clicking on the link below.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first.   001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(   [Parameter(position = 1, valueFromPipeline=$true)]   [Microsoft.SharePoint.PowerShell.SPFeatureDefinitionPipeBind]   $Identity )#end param   Begin   {     # declare empty array to hold results. Will add custom member `     # for Url to show where activated at on objects returned from Get-SPFeature.     $results = @()         $params = @{}   }   Process   {     if([string]::IsNullOrEmpty($Identity) -eq $false)     {       $params = @{Identity = $Identity             ErrorAction = "SilentlyContinue"       }     }       # check farm features     $results += (Get-SPFeature -Farm -Limit All @params |              % {Add-Member -InputObject $_ -MemberType noteproperty `                 -Name Url -Value ([string]::Empty) -PassThru} |              Select-Object -Property Scope, DisplayName, Id, Url)     # check web application features     foreach($webApp in (Get-SPWebApplication))     {       $results += (Get-SPFeature -WebApplication $webApp -Limit All @params |                % {Add-Member -InputObject $_ -MemberType noteproperty `                   -Name Url -Value $webApp.Url -PassThru} |                Select-Object -Property Scope, DisplayName, Id, Url)       # check site collection features in current web app       foreach($site in ($webApp.Sites))       {         $results += (Get-SPFeature -Site $site -Limit All @params |                  % {Add-Member -InputObject $_ -MemberType noteproperty `                     -Name Url -Value $site.Url -PassThru} |                  Select-Object -Property Scope, DisplayName, Id, Url)                          $site.Dispose()         # check site features in current site collection         foreach($web in ($site.AllWebs))         {           $results += (Get-SPFeature -Web $web -Limit All @params |                    % {Add-Member -InputObject $_ -MemberType noteproperty `                       -Name Url -Value $web.Url -PassThru} |                    Select-Object -Property Scope, DisplayName, Id, Url)           $web.Dispose()         }       }     }   }   End   {     $results   } } #end Get-SPFeatureActivated   Snippet of output from Get-SPFeatureActivated   Conclusion    This script has been requested for a long time and I’m glad to finally getting a working “clean” version.  If you find any bugs or issues with the script please let me know.  I’ll be posting this to the TechNet Script Center after some internal review.  Enjoy the script and I hope it helps with your admin / developer needs.         -Frog Out

  Read the article

• Doubts about several best practices for rest api + service layer

  - by TheBeefMightBeTough

  I'm going to be starting a project soon that exposes a restful api for business intelligence. It may not be limited to a restful api, so I plan to delegate requests to a service layer that then coordinates multiple domain objects (each of which have business logic local to the object). The api will likely have many calls as it is a long-term project. While thinking about the design, I recalled a few best practices. 1) Use command objects at the controller layer (I'm using Spring MVC). 2) Use DTOs at the service layer. 3) Validate in both the controller and service layer, though for different reasons. I have my doubts about these recommendations. 1) Using command objects adds a lot of extra single-purpose classes (potentially one per request). What exactly is the benefit? Annotation based validation can be done using this approach, sure. What if I have two requests that take the same parameters, but have different validation requirements? I would have to have two different classes with exactly the same members but different annotations? Bleh. 2) I have heard that using DTOs is preferable to parameters because it makes for more maintainable code down the road (say, e.g., requirements change and the service parameters need to be altered). I don't quite understand this. Shouldn't an api be more-or-less set in stone? I would understand that in the early phases of a project (or, especially, an entire company) the domain itself will not be well understood, and thus core domain objects may change along with the apis that manipulate these objects. At this point however the number of api methods should be small and their dependents few, so changes to the methods could easily be tolerated from a maintainability standpoint. In a large api with many methods and a substantial domain model, I would think having a DTO for potentially each domain object would become unwieldy. Am I misunderstanding something here? 3) I see validation in the controller and service layer as redundant in most cases. Why would I validate that parameters are not null and are in general well formed in the controller if the service is going to do exactly the same (and more). Couldn't I just do all the validation in the service and throw a runtime exception with a list of bad parameters then catch that in the controller to make the error messages more presentable? Better yet, couldn't I just make the error messages user-friendly in the service and let the exception trickle up to a global handler (ControllerAdvice in spring, for example)? Is there something wrong with either of these approaches? (I do see a use case for controller validation if the input does not map one-to-one with the service input, but since the controllers are for a rest api and not forms, the api parameters will probably map directly to service parameters.) I do also have a question about unchecked vs checked exceptions. Namely, I'm not really sure why I'd ever want to use a checked exception. Every time I have seen them used they just get wrapped into general exceptions (DomainException, SystemException, ApplicationException, w/e) to reduce the signature length of methods, or devs catch Exception rather than dealing with the App1Exception, App2Exception, Sys1Exception, Sys2Exception. I don't see how either of these practices is very useful. Why not just use unchecked exceptions always and catch the ones you actually do care about? You could just document what unchecked exceptions the method throws.

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >