Search Results

Search found 28784 results on 1152 pages for 'start'.

Page 243/1152 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

  • How to correctly calculate address spaces?

    - by user337308
    Below is an example of a question given on my last test in a Computer Engineering course. Anyone mind explaining to me how to get the start/end addresses of each? I have listed the correct answers at the bottom... The MSP430F2410 device has an address space of 64 KB (the basic MSP430 architecture). Fill in the table below if we know the following. The first 16 bytes of the address space (starting at the address 0x0000) is reserved for special function registers (IE1, IE2, IFG1, IFG2, etc.), the next 240 bytes is reserved for 8-bit peripheral devices, and the next 256 bytes is reserved for 16-bit peripheral devices. The RAM memory capacity is 2 Kbytes and it starts at the address 0x1100. At the top of the address space is 56KB of flash memory reserved for code and interrupt vector table. What Start Address End Address Special Function Registers (16 bytes) 0x0000 0x000F 8-bit peripheral devices (240 bytes) 0x0010 0x00FF 16-bit peripheral devices (256 bytes) 0x0100 0x01FF RAM memory (2 Kbytes) 0x1100 0x18FF Flash Memory (56 Kbytes) 0x2000 0xFFFF

    Read the article

  • I'm starting a new project in Perl, how should I begin?

    - by Brad Gilbert
    The question is about how to start a new Perl project. How should I create the skeleton of the Project? What should the directory layout look like? How do I start testing? What build system should I use? Should I even use a build system? I have been writing Perl programs for a while now. I only started to run tests on my recent programs. I know Perl the language fairly well, now it is time to learn the way to build full blown Perl projects. I already add these to the beginning of every Perl file: use strict; use warnings; # and occasionally use autodie; I have also used Moose.

    Read the article

  • Netbeans 7.2 won't open on OS X

    - by Mark van Wyk
    I installed Netbeans on OSX Mountain Lion running JDK 7. Everything was working fine. Then my machine for no reason crashed. After this I could no longer open Netbeans anymore. If I try to start Netbeans from the commandline: /Applications/NetBeans/NetBeans 7.2.app/Contents/MacOS/netbeans Then it works fine. From there I can select Netbeans About and confirm that my userdir and cachedir is: User directory: /Users/<user>/Library/Application Support/NetBeans/7.2 Cache directory: /Users/<user>/Library/Caches/NetBeans/7.2 So, I deleted these directories and tried again, but alas, I can only start netbeans via the commandline. Ideas appreciated...

    Read the article

  • using ruby test and selenium grid how can I keep the same browser window for multiple tests?

    - by George Horlacher
    Each of my tests start a new selenium client browser and tear it down so they can run stand alone with this code: def setup if $selenium @selenium = $selenium else @selenium = Selenium::SeleniumDriver.new("#$sell_server", 4444, "#$browser", "http://#$network.#$host:2086", 10000); @selenium.start end @selenium.set_context("test_login") end def teardown @selenium.stop unless $selenium assert_equal [], @verification_errors end What I'd like is to run a suite of tests that all use the same browser and don't keep opening and closing new browsers for every test. I've tried using $selenium as a global object / browser but each test still opens up a new browser and closes it. How should this be done?

    Read the article

  • Tutorials/Books on using Mono to develop RESTful webservices?

    - by max
    Hi, anyone out there got any pointers to good links/tutorials/books on developing webservices with Mono? In more detail, I am interested in using Mono from project start on a Linux host developing in C# using Visual Studio for development, ideally with remote debugging if that is realistic developing web-services in MONO accessible in a RESTful manner, returning JSON hiding the services processes behind an Apache access the services either via javascript/AJAX or from a thin script layer written in PHP scalability is important for me unit-testing of webservices Any recommendations for material I could sift through to get a good head-start? I might add that I'm C#/.NET savvy, but not in the context of web development. I've been using it since it came out, but mainly for internal server-client applications where the clients were Windows desktop apps and the communication layer was remoting or, sometimes, more low-level socket-based. Thanks, max

    Read the article

  • How can i use Stopwatch [ apache ] to calculate the time taken by a method?

    - by Rakesh Juyal
    I am using StopWatch [ apache ] to get the time taken by my method. The approach i am following is StopWatch stopWatch = new StopWatch(); stopWatch.start(); myMethod(); stopWatch.stop(); logger.info( "Time taken by myMethod: " + stopWatch.getTime() + " millisecs"); stopWatch.reset(); stopWatch.start(); anotherMethod(); stopWatch.stop(); logger.info( "Time taken by anotherMethod: " + stopWatch.getTime() + " millisecs"); Thats the only thing i know about StopWatch :). How/when to use split(), unsplit(), getSplitTime(),suspend()... ?

    Read the article

  • Problem in finalizing the link list in C#

    - by Yasin
    My code was almost finished that a maddening bug came up! when i nullify the last node to finalize the link list , it actually dumps all the links and make the first node link Null ! when i trace it , its working totally fine creating the list in the loop but after the loop is done that happens and it destroys the rest of the link by doing so, and i don't understand why something so obvious is becoming problematic! (last line) struct poly { public int coef; public int pow; public poly* link;} ; poly* start ; poly* start2; poly* p; poly* second; poly* result; poly* ptr; poly* start3; poly* q; poly* q2; private void button1_Click(object sender, EventArgs e) { string holder = ""; IntPtr newP = Marshal.AllocHGlobal(sizeof(poly)); q = (poly*)newP.ToPointer(); start = q; int i = 0; while (this.textBox1.Text[i] != ',') { holder += this.textBox1.Text[i]; i++; } q->coef = int.Parse(holder); i++; holder = ""; while (this.textBox1.Text[i] != ';') { holder += this.textBox1.Text[i]; i++; } q->pow = int.Parse(holder); holder = ""; p = start; //creation of the first node finished! i++; for (; i < this.textBox1.Text.Length; i++) { newP = Marshal.AllocHGlobal(sizeof(poly)); poly* test = (poly*)newP.ToPointer(); while (this.textBox1.Text[i] != ',') { holder += this.textBox1.Text[i]; i++; } test->coef = int.Parse(holder); holder = ""; i++; while (this.textBox1.Text[i] != ';' && i < this.textBox1.Text.Length - 1) { holder += this.textBox1.Text[i]; if (i < this.textBox1.Text.Length - 1) i++; } test->pow = int.Parse(holder); holder = ""; p->link = test; //the addresses are correct and the list is complete } p->link = null; //only the first node exists now with a null link! }

    Read the article

  • abandon session in asp.net on browser close..kill session cookie

    - by Tuviah
    So I have a website where I use session start and end events to track and limit open instances of our web application, even on the same computer. On page unload i call a session enabled page method which then called session.abandon. This triggers session end event and clears the session variable but unfortunately does not kill the session cookie!! as a result if other browser instances are open there are problems because their session state just disappeared...and much worse than this when I open the site again with the zombie session still not expired, I get multiple session start and session end events on any subsequent postbacks. This happens on all browsers. so how do I truly kill the session (force the cookie to expire)

    Read the article

  • Apple Magic Trackpad Gestures carried out as personalized Commands in Windows

    - by Adele
    I want to have the Apple Magic Trackpad to work on Windows, but NOT as a regular Mouse! I will need the normal Trackpad Gestures to work with a c# Application (i.e. when carring out a 2 finger swipe to the left, it will start playing a song...). I guess I´ll have to write my own driver? Is there a way to use Apples MAgic Trackpad Driver for Windows and re-write that one? OR is there any way (API, self-written driver), so that I could just hook the gestures to my Commands? Or any RAW Input examples? Does anybody know how to do that, or where to start? Thank you so much, I´m really lost.

    Read the article

  • what wrong in the program using tie and array

    - by SCNCN2010
    File : #comment1 #comment2 #comment3 #START HERE a: [email protected] b: [email protected] my perl program : use Data::Dumper; use Tie::File; tie my @array, 'Tie::File', 'ala.txt' or die $!; my $rec = 'p: [email protected]'; my $flag =1 ; my $add_flag = 0; for my $i (0..$#array) { next if ($array[$i] =~ /^\s*$/); if ( $flag == 1 ) { if ($array[$i] =~ /#START HERE/ ) { $flag = 0; } else { next ; } } if (($array[$i] cmp $rec) == 1) { splice @array, $i, 1, $rec; $add_flag = 1; last ; } } if ( $add_flag == 0 ) { my $index = $#array+1; $array[$index] = $rec ; } the recording adding end of file always . I am trying to add to middle or begin or end like aplphbetical order

    Read the article

  • Solr date range problem and specific date problem

    - by Hamid
    I index some data include date in solr but when search for specific date, i get some record (not all record) include some record in next day for example: http://localhost:8080/solr/select/?q=pubdate:[2010-03-25T00:00:00Z TO 2010-03-25T23:59:59Z]&start=0&rows=10&indent=on&sort=pubdate desc i have 625000 record in 2010-03-25 but above query result return 325412 that include 14 record from 2010-03-26. Also i try with below query, but not get right result http://localhost:8080/solr/select/?q=pubdate:"2010-03-25T00:00:00Z"&start=0&rows=10&indent=on&sort=pubdate desc How to get right result for specific date ??? Could you please help me? Thanks in advanced Hamid

    Read the article

  • android call an outside function from a thread

    - by junmats
    hi.. say for example I have this code in my activity: public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Thread cThread = new Thread(new Runner()); cThread.start(); } private NotifyMe(){ //do something here } and this is my Runner class: public class TCPClient implements Runnable { public void run(){ //call NotifyMe() [THIS IS MY QUESTION] } } I have a thread on my activity that runs the Runner Class. Once the thread start, I would like to call the NotifyMe() function that is located at the activity. Is this possible? Please let me know if you don't understand my question. Thanks in advance.

    Read the article

  • Simple time profiling - strange times

    - by Gacek
    I'm trying to profile my code to check how long it takes to execute some parts of my code. I've wrapped my most time-consuming part of the code in something like that: DateTime start = DateTime.Now; ... ... // Here comes the time-consuming part ... Console.WriteLine((DateTime.Now - start).Miliseconds); The program is executing this part of code for couple of seconds (about 20 s) but in console I get the result of something about 800 miliseconds. Why is that so? What am I doing wrong?

    Read the article

  • How to play sounds in locked mode on iPhone

    - by Joe Mallik
    Everybody knows the standard procedure to keep your app alive, after the user pressed the lock button (silent sound). If I start a sound with AVAudioPlayer (before the iphone is locked), the sound plays till it's end (after locking). The app is still running. If I try to start another sound while the iPhone is locked, it will never get played. All the other things work as well but the sound doesn't. How can I play a sound while the iphone is locked?

    Read the article

  • iPhone: Tracking/Identifying individual touches

    - by FlorianZ
    I have a quick question regarding tracking touches on the iPhone and I seem to not be able to come to a conclusion on this, so any suggestions / ideas are greatly appreciated: I want to be able to track and identify touches on the iphone, ie. basically every touch has a starting position and a current/moved position. Touches are stored in a std::vector and they shall be removed from the container, once they ended. Their position shall be updated once they move, but I still want to keep track of where they initially started (gesture recognition). I am getting the touches from [event allTouches], thing is, the NSSet is unsorted and I seem not to be able to identify the touches that are already stored in the std::vector and refer to the touches in the NSSet (so I know which ones ended and shall be removed, or have been moved, etc.) Here is my code, which works perfectly with only one finger on the touch screen, of course, but with more than one, I do get unpredictable results... - (void) touchesBegan:(NSSet*)touches withEvent:(UIEvent*)event { [self handleTouches:[event allTouches]]; } - (void) touchesEnded:(NSSet*)touches withEvent:(UIEvent*)event { [self handleTouches:[event allTouches]]; } - (void) touchesMoved:(NSSet*)touches withEvent:(UIEvent*)event { [self handleTouches:[event allTouches]]; } - (void) touchesCancelled:(NSSet*)touches withEvent:(UIEvent*)event { [self handleTouches:[event allTouches]]; } - (void) handleTouches:(NSSet*)allTouches { for(int i = 0; i < (int)[allTouches count]; ++i) { UITouch* touch = [[allTouches allObjects] objectAtIndex:i]; NSTimeInterval timestamp = [touch timestamp]; CGPoint currentLocation = [touch locationInView:self]; CGPoint previousLocation = [touch previousLocationInView:self]; if([touch phase] == UITouchPhaseBegan) { Finger finger; finger.start.x = currentLocation.x; finger.start.y = currentLocation.y; finger.end = finger.start; finger.hasMoved = false; finger.hasEnded = false; touchScreen->AddFinger(finger); } else if([touch phase] == UITouchPhaseEnded || [touch phase] == UITouchPhaseCancelled) { Finger& finger = touchScreen->GetFingerHandle(i); finger.hasEnded = true; } else if([touch phase] == UITouchPhaseMoved) { Finger& finger = touchScreen->GetFingerHandle(i); finger.end.x = currentLocation.x; finger.end.y = currentLocation.y; finger.hasMoved = true; } } touchScreen->RemoveEnded(); } Thanks!

    Read the article

  • I like to learn computer science and programming, but i have no understanding.

    - by Josiah
    Hi all, I like to learn computer science and programming, but i don't know where and how to start. For the past two months, i have been researching on types of programming, i found my interest in desktop programming, and also found this subjects (discrete maths, logic, algorithms, data structures, artificial intelligence, simulation) said to be a most known (subjects). Well as a beginner, i have no understanding on what type of language or books that can cover all these subjects, or even how to write any code. Secondly, am as young as you can guess and i need a language to start with that will be easy for me to understand, and books to read. Thank you.

    Read the article

  • Android EditText and addTextChangedListener

    - by Alex
    im currently porting a database manager to android and due to performance reasons i like to update only propertys that have been modified. Im trying to do this with the addTextChangedListener in order to add modified entrys to a List, but my Program never enters any of its methods. EditText Et = (EditText) Editors.get(Prop.Name); Et.addTextChangedListener(new TextWatcher() { @Override public void afterTextChanged(Editable s) { // TODO Auto-generated method stub } @Override public void beforeTextChanged(CharSequence s, int start, int count, int after) { // TODO Auto-generated method stub } @Override public void onTextChanged(CharSequence s, int start, int before, int count) { // TODO Auto-generated method stub if(Prop.GetType() == Property.PROPTYPE.num) { float f = Float.parseFloat(s.toString()); Prop.FromString(f); } else { Prop.FromString(s.toString()); } propertiesToUpdate.add(Prop); }); Et.setText(Prop.ToString());

    Read the article

  • Should I call release on these cocoa objective-c variables?

    - by Andrew Arrow
    In the code below I'm making a new NSString with alloc and initializing it with the contents of some file. Because I'm calling alloc I know it's my responsibility to call release on the string when I'm done. But what about the variables "lines" and "line"? Since the method "componentsSeparatedByString" does not start with the word "new" or "create" can I assume "lines" will be autoreleased? Same question for "line" since "objectAtIndex" also does not start with "new" or "create". NSString* buffer = [[NSString alloc] initWithData:[fileManager contentsAtPath:@"/foo"] encoding:NSUTF8StringEncoding]; NSArray* lines = [buffer componentsSeparatedByString:@"\n"]; NSString* line = [lines objectAtIndex:5]; // do something with line [buffer release]; So is the code above okay? Or should I be calling "release" on lines and line too? Thanks.

    Read the article

  • App only spawns one thread

    - by tipu
    I have what I thought was a thread-friendly app, and after doing some output I've concluded that of the 15 threads I am attempting to run, only one does. I have if __name__ == "__main__": fhf = FileHandlerFactory() tweet_manager = TweetManager("C:/Documents and Settings/Administrator/My Documents/My Dropbox/workspace/trie/Tweet Search Engine/data/partitioned_raw_tweets/raw_tweets.txt.001") start = time.time() for i in range(15): Indexer(tweet_manager, fhf).start() Then in my thread-entry point, I do def run(self): print(threading.current_thread()) self.index() That results in this: <Indexer(Thread-3, started 1168)> So of 15 threads that I thought were running, I'm only running one. Any idea as to why? Edit: code

    Read the article

  • Error finding tcl.init when running Git GUI

    - by Leslie
    I get the following error message when I try to start the Git GUI: Error in Wish Can't find a usable init.tcl in the following directories: ... [list of directories follows, init.tcl is in the first one listed] This probably means that Tcl wasn't installed properly. I'm running Windows 7 and I'm sure this problem is related to that, but I don't know where to start. I can, and most often will, use the Bash tool, but it annoys me that this doesn't work. I installed the msysgit package: Git-1.7.0.2-preview20100309.exe

    Read the article

  • Supporting more than one codebase in ANSI-C

    - by Ilker Murat Karakas
    I am working on a project, with an associated Ansi-C code base. (let me call this the 'main' codebase). I now am confronted with a typical problem (stated below), which I believe I would be able to solve much easily if I had an object-oriented language at hand. The problem is this: I will have to start more than one codebases; i.e. I will have to start supporting a parallel codebase (even maybe more in the future). The initial codebases for all the new (i.e. parallel) codebases will initially be identical as the old (i.e. 'main') codebase. As we are talking about the 'C' language, I have till now been thinking of adding '#ifdef' statements to code, and writing the branch-spacific code inside those 'ifdef' blocks. Hoping that I made the problem clear (enough!), I would like to hear thoughts on clever patterns that would help me handle this problem elegantly in Ansi C. Cheers

    Read the article

  • How the simples GUI countdown is supposed to work?

    - by Roman
    I am trying to write the simples GUI countdown. I found in Internet some code but it is already too fancy for me. I am trying to keep it as simple as possible. So, I just want to have a window saying "You have 10 second left". The number of second should decrease every second from 10 to 0. I wrote a code. And I think I am close to the working solution. But I still missing something. Could you pleas help me to find out what is wrong? Here is my code: import javax.swing.*; public class Countdown { static JLabel label; // Method which defines the appearance of the window. private static void showGUI() { JFrame frame = new JFrame("Simple Countdown"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JLabel label = new JLabel("Some Text"); frame.add(label); frame.pack(); frame.setVisible(true); } // Define a new thread in which the countdown is counting down. static Thread counter = new Thread() { public void run() { for (int i=10; i>0; i=i-1) { updateGUI(i,label); try {Thread.sleep(1000);} catch(InterruptedException e) {}; } } }; // A method which updates GUI (sets a new value of JLabel). private static void updateGUI(final int i, final JLabel label) { SwingUtilities.invokeLater(new Runnable(i,label) { public Runnable(int i, JLabel label) { this.i = i; this.label = label; } public void run() { label.setText("You have " + i + " seconds."); } }); } // The main method (entry point). public static void main(String[] args) { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { showGUI(); //counter.start(); } }); //counter.start(); } } And I have several concrete question about this code: Where should I place the counter.start();? (In my code I put it on 2 places. Which one is correct?) Why compiler complains about the constructor for Runnable? It says that I have an invalid method declaration and I need to specify the returned type. ADDED: I made the suggested corrections. And then I execute the code and get: Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at Worker.run(Worker.java:12) In the Worker.java in the line 12 I have: label.setText("You have " + i + " seconds.");.

    Read the article

  • Multiprocessing Bomb

    - by iKarampa
    I was working the following example from Doug Hellmann tutorial on multiprocessing: import multiprocessing def worker(): """worker function""" print 'Worker' return if __name__ == '__main__': jobs = [] for i in range(5): p = multiprocessing.Process(target=worker) jobs.append(p) p.start() When I tried to run it outside the if statement: import multiprocessing def worker(): """worker function""" print 'Worker' jobs = [] for i in range(5): p = multiprocessing.Process(target=worker) jobs.append(p) p.start() It started spawning processes non-stop, without any way of to terminating it. Why would that happen? Why it did not generate 5 processes and exit? Why do I need the if statement?

    Read the article

  • How to replace a div container with javascript

    - by Kovu
    Hi, I must have a little design in javascript. I have a menu with 5 entrys and only 1 HTML-page. So I will have a content-div and enabled and disabled different static content in it, each menu-entry is another content. I tried with 5 divs and disable 4 of them and enable 1, but the element under each other means every div is like a - enabled or not, so the "content" is moving then. Hope its understandable. Here is the code so far: <html><head><title>Des Einsame-Katerchen's kleine Homepage</title> <style type="text/css"> a:link { font-weight:bold; color:blue; text-decoration:none; } a:visited { font-weight:bold; color:blue; text-decoration:none; } a:focus { font-weight:bold; color:blue; text-decoration:none; } a:hover { font-weight:bold; color:blue; text-decoration:line-through; } a:active { font-weight:bold; color:blue; text-decoration:none; } h1:focus { background-color:red; } h1:hover { background-color:silver; } h1:active { background-color:green; } </style> <script> function an(id) { document.getElementById('start').style.visibility = 'hidden'; document.getElementById('start').style.height = '0px'; document.getElementById('me').style.visibility = 'hidden'; document.getElementById('me').style.height = '0px'; document.getElementById('rpg').style.visibility = 'hidden'; document.getElementById('rpg').style.height = '0px'; document.getElementById('musik').style.visibility = 'hidden'; document.getElementById('musik').style.height = '0px'; document.getElementById('screens').style.visibility = 'hidden'; document.getElementById('screens').style.height = '0px'; document.getElementById(id).style.visibility = 'visible'; document.getElementById(id).style.height = '500px'; } </script> </head> <body style=" " > <div style="width=100%; text-align:center; border: 1px red solid; height:40px;"> <div style="float:left; width:100px;"><a href="#" OnClick="an('start')" >Startseite</a></div> <div style="float:left; width:100px;"><a href="#" OnClick="an('me')" >Über mich</a></div> <div style="float:left; width:100px;"><a href="#" OnClick="an('rpg')" >RPG-Chars</a></div> <div style="float:left; width:100px;"><a href="#" OnClick="an('musik')" >Musik</a></div> <div style="float:left; width:150px;"><a href="#" OnClick="an('screens')" >Knuddels-Screens</a></div> </div> <br> <div id="start" style="border:1px red solid; width:500px; height:500px; overflow: visible; " > a </div> <div id="me" style="border:1px red solid; width:500px; height:0px; overflow: visible; visibility: hidden; " > b </div> <div id="rpg" style="border:1px red solid; width:500px; height:0px; overflow: visible; visibility: hidden; " > c </div> <div id="musik" style="border:1px red solid; width:500px; height:0px; overflow: visible; visibility: hidden; " > d </div> <div id="screens" style="border:1px red solid; width:500px; height:0px; overflow: visible; visibility: hidden; " > e </div> </body>

    Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >